Maytag 8113P645-60 Range User Manual
Contents
1. 5019 607 00937 Subject to technical modifications 42. Machine operation Additional information including troubleshooting and service can be found in the individual chapters of the instructions for use Sort laundry according to care symbols Do not tumble dry Suitable for tumble drying at low drying temperature e o Suitable for tumble drying Selecting options if available Starting dryer Programme end unloading dryer Switching dryer off Sort by Material thickness W henever there is greater load than the dryer can handle separate laundry according to weight e g dry towels and thin underwear separately Type of material Cotton linen synthetic textiles easy care Degree of drying Cupboard dry iron dry etc Do not tumble dry Woollens silk nylon stockings delicate embroidery fabrics with metallic decorations bulky items such as sleeping bags etc Check that all fastenings are closed and that pockets are empty Please ensure that there are no cigarette lighters in the wash Turn laundry inside out Pull the door handle If the child safety lock is activated please deactivate it additional information can be found in the Door Reversibility Child Safety Lock chapter of the instructions for use Hes laundry loosely in the drum to achieve equal drying throughout Then close the door Select the drying programme required by turning the programme selector knob for information refer to programme table Select the option req
3. after a power failure always press the Start Pause button gt Is the plug properly inserted into the mains electricity socket Is there a power failure Has the fuse blown Is the door properly closed Has a drying programme been selected Has the Start Pause button been pressed Has the Start delay option been selected Lint filter or water container indicator lamp on gt Is the lint filter clean Is the water container empty Has the water container been inserted correctly Is the heat exchanger clean Water droplets underneath the dryer gt Has the heat exchanger been inserted correctly Has any fluff on the heat exchanger seal been wiped away Has any fluff on the door seal been wiped away Has the water container been inserted correctly Replacing the drum light bulb if supplied gt If the inside lamp does not work the bulb may be faulty Unplug the dryer Open the door and unscrew the glass cover inside the drum Replace the faulty bulb with anew one and screw the glass cover back on Replacement bulb Philips 15W 230 240V E14 All programme sequence indicators blinking gt Service call necessary If the fault is still present once the above checks have been undertaken or should the fault occur for a second time switch the machine off Please contact your After Sales Service representative for more information refer to the warranty m
4. please check the following points before phoning for the customer service also refer to relevant chapter in the instructions for use AFTER SALES SERVICE Clean the filter at the end of every cycle gt Open the door Pull the filter upwards Open the filter Brush lint using a soft brush or your fingertips Close the filter Push the filter back into place Empty the water container at the end of each drying cycle gt Pull the handle to remove the water container Empty the water container Replace the water container when empty by pushing it completely back in place Clean the heat exchanger at least every month For further information see chapter Heat Exchanger in the Instructions for Use Drying takes too long laundry is not dry enough gt Remove fibres in and around the water evacuation hole at least once per month Has the correct drying programme been selected Was the inserted laundry too wet washing machine spin speed less than 1000 rpm Is the lint filter dirty filter indicator light on Is the heat exchanger dirty for more information refer to the instructions for use Is the room temperature too high Are the End of Cyde and Anticrease indicator lamps lighting up The drying cycle is complete and the laundry can be taken out If the drying result does not meet your expectation select a more dry programme The dryer will not operate
5. Anticrease End of cyde ia extra cry Cotton b 60 SS cupboard dry Drying ime 77 wg Iron dry Heat exchanger Gere Express Chime Anticrease Dynes Synthetics o e extra dry A Jaga ORS O 10 Skon dry Airing s Delicate plus Programme sequence Intellisense Drying Anticrease f End of Cyde Overdr j Anti End protection Drying crease of cycle Options Gentle Gentle Reduces drying intensity recommended for delicate items Express Rapid Shortens drying duration recommended for thin items of the same size O Buzzer Signals sounds end of drying cycle Q gt O 2 o Anticrease Anticrease Prevents laundry from creasing up to 12 hours automatic buzzer signal can be switch off by a Eo crease O Delayed Start Pause Delays the start of the drying cycle by 1 to 12 hours Each time the button is pressed the start time is delayed by 1 hour Then press the Start Pause button to confirm the final selection and to start the dryer The delayed start indicator lamp flashes and the countdown counts down in 1 hour intervals The countdown is indicated by the indicator lamp above the button flashing During the countdown the drum will turn from time to time to re distribute the laundry To cancel or change the previously set time delay set the index of the programme selector knob to the top or open the door Start a o D lt
6. anual Please have the following details ready when calling your after sales service representative SAA AK 0000 000 00000 e The nature of the fault e The dryer type and model e The service code the number after the word Service on the adhesive rating plate on the right hand side when the door is open Before using the machine please also read the instructions for use carefully Quick Reference Guide MDC 709T MDc709T Programme selector knob The drying programme is selected by turning this knob Start Pause button Start The drying programme is started by pressing this button The Pause indicator lamp flashes during the selection phase and lights up during drying Indicator lamps Filter The indicator lamp lights up when the filter and or heat exchanger need cleaning Clean the filter at the end of every cycle Clean filter Water container he indicator lamp lights up when the water container needs 0 be emptied The drying cycle is automatically interrupted Empty the container and restart the drying programme Empty the water container after every drying cycle Water container Clean heat exchanger he Led lights up after 30 cycles when the heat exchanger needs to be cleaned Clean the heat exchanger Then for reset the led indication turn the programme selector knob o the vertical position indicated by the symbol and press the Start Pause button during 3 seco
7. crease Anti Crease If the laundry is not removed at the end of the drying cycle an automatic anti crease cycle will operate for maximum 60 min The drum rotates at regular intervals to prevent the laundry from creasing Set the programme selector knob to Off O cleaning the lint filter O pen door pull lint filter up and out of machine and open i it Brush lint using a soft brush or your fingertips Close lint filter and push firmly back into place Emptying water container Pull container out by the handle and empty Replace the container when empty by pushing it completely back into place If required activate child safety lock additional information can be found in the Door Reversibility Child Safety Lock chapter of the instructions for use Please note O nly use additives plastic items specified as dryer safe and rinse items that have been treated with stain remover thoroughly in plenty of water before drying N ever dry rubber objects or objects stained with vegetable oils in the dryer Multi layered thick laundry such as terry towels dish cloths and dry Extra dry towels bed linen underwear terry towelling bath robes 5 Similar types of laundry which do pu not require ironing such as dry Cupboard dry rowels bed linen underwear baby O clothes T shirts cotton socks Laundry which requires ironing such Iron dry as bed and table linen dry towels T shirts polo
8. nds until led switches off Heat exchanger Remaining time Time remaining display h min Depending on the programme selected once the drying cycle has been started a default drying time is displayed The ime displayed is corrected by a few minutes depending on he volume type and dampness of the laundry The drying time specified is a calculated value which will be updated during the drying programme in ly eee The flashing lines indicate that the calculation is running The eee remaining time will be updated ly an yn Overdry protection Intellisense i he indicator lamp lights up when a humidity controlled program is selected to indicate the working protection unction Function is not active in time controlled programmes 10 20 30 40 60 90 and Airing Airing A Dryness adjustment his is an option to adjust the dryness of the laundry 0 according to your wishes Select the desired programme and he option dryness level adjustment by pressing the button for more dry or the button for more humid The selected dryness will be stored as a pre setting to the selected drying programme Using the drying programme next time the pre setting appears By pressing the dryness adjustment buttons or the pre setting can be changed E Dryness level O Maytag is a registered trademark a ii a INTELLISENSE 7 Kg Inelisense Dying
9. shirts work clothes Laundry with thick multi layered a Extra dry areas such as bed and table linen track suits anoraks blankets Q Laundry which does not require Cupboard dry ironing such as shirts blouses D T shirts sportswear as Laundry which requires ironing such lron dry as trousers dresses skirts shirts blouses w t an Low drying intensity for delicates YD Cupboard dry and items labelled with Ke such as Ooo trousers dresses shirts blouses a Laundry is aired and T refreshed for 30 minutes oa without heating lt N Completes drying for min SL 35 full size textiles TE suitable for all fabrics a Test programme in accordance with EN 61121 Cotton or linen hot wash coloured laundry Cotton Max 7 kg Synthetic mixed fibre or cotton easy care ironing not required laundry Synthetics Max 3 5 kg Laundry made from synthetic fibres such as polyamide nylon polyacrylic etc Delicate plus Max 2 5 kg Airing Drying time 10 20 30 40 60 90 x 180 160 x 85 70 160 120 x 70 60 120 100 50 40 x 90 70 40 30 x 80 60 30 20 x 70 50 ii 10 20 30 40 60 90 How to proceed if you want to correctly care for and clean your dryer you want to check the dryer yourself first If your machine is not functioning correctly
10. uired by pressing the corresponding button The indicator lamp above the relevant button lights up to confirm your selection A fast blinking led indicates a wrong selection is made incompatible options Press the button again to cancel the option The drying programme is started by pressing the Start Pause button The relevant indicator lamp lights up Changing programme selection If the programme selected is changed during drying the dryer stops The Drying indicator lamps flashes To operate the new programme again press the Start Pause button Interrupting programme To interrupt the dryer during the drying cycle set the programme selector knob to Airing and press the Start Pause button Wait at least 5 minutes before opening the door to allow the dryer to cool down For your safety the drying cycle stops automatically if you open the door To restart after door opening close the door and press the Start Pause button again Warning N ever stop a tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated The final part of a tumble dryer cycle occurs without heat cool down cycle to ensure that the items are left at a temperature that ensures that the items will not be damaged End of Cyde End Take the laundry out of the dryer The drying process is complete and the anti crease phase has been reached active Anti
Download Pdf Manuals
Related Search