Home

Magnavox 27MS3404R Stereo System User Manual

1. Features SmartLock SmartLock a v Block Channel Off o Format Setup Code Clear All Block Movie Rating 9 TV Rating SmartLock Block Channel Setup Code y Clear All Clear gt Block All Movie Rating TV Rating HELPFUL HINT If you tune to a blocked channel and enter your Access Code to view the channel ALL blocked channels will be viewable until the TV is powered OFF and then turned back ON When the TV is powered back ON the previously blocked channels will be blocked again CLEAR ALL will not work with the Movie and TV Ratings These options must be reset individually SmartLock Block Channel Setup Code Clear All Block All Movie Rating TV Rating The Clear All option when activated will unblock ALL blocked channels It will not affect programming blocked by the Movie or TV Rating options 24 Channel 1 2 Blocked By SmartLock Channel Blocking Access Code Or enter your Access Code to view a tuned channel that is blocked with Block Channel How To BLock ALL CHANNELS AT THE SAME TIME ere may come a time when you want to Block All the television s channels Maybe you don t want your children to watch TV for a given period time
2. 26 SmartLock TV Ratings 27 SmartLock Blocking Options 28 Remote Control Use Sleeptimer idad 29 Closed Captioning 30 SmattPicture M ici Meee kee ace ee eh ee ee ae 31 SmartSo nd a radar 32 Alternate Channel 33 General Information Troubleshooting Tips 34 Cleaning and Care 35 Glossary of Terms 36 yt 37 Factory Service Location 38 39 Warranty E eee 40 Here are a few of the features built into your new Television Audio Video Jack panel located on the back and side of the television for direct connections when using audio video acces sory devices These Jacks can provide improved quality TV pic ture and sound playback Automatic Programming of Channels for quick and easy selection of favorite stations available in your area Closed Captioning allows the viewer to read TV program dialogue or voice conversations as on screen text Expand 4 3 will allow you to expand the letterbox image produced by certain DVD players to fill the entire TV screen Infrared Remote Control works your TV set and allows you to program certain features with the press of a button On screen Features in either English or Spanish show helpful messages for setting of TV controls
3. Main Picture AutoLock Sound SmartLock y Features Install Features y SmartLock Format Features Y SmartLock Format Access Code Features SmartLock a Movie Rating Y SmartLock Access Code o Block Channel Format XXXX Setup Code Clear All Block All v Movie Rating gt TV Rating Movie Rating NOTE The 0 7 1 l access code shown on this page is the default code or a way to reset the code when the current access code is not known 26 Channel 12 Blocked By AutoLocx Movie Rating Access Code To view a program blocked by the Movie Rating options enter your 4 digit access code This will disable all blocked Movie Ratings until the TV is powered off and on again Then the block ing options will be restored BLOCKING PROGRAMS BASED ON TV RATINGS his portion of the SmartLock features cover program ratings based on the TV Industry rating system This is known as TV Ratings within SmartLock After selecting the Smartlock feature and enter ing your personal access code the SmartLock options screen appears Scroll the menu using the CURSOR 1 UP A or DOWN Y buttons until the words TV RATINGS are highligh
4. OWNER S MANUAL MAGNAVOX SMART VERY SMART Color Television 27MS3404R NEED HELP CALL us MAGNAVOX REPRESENTATIVES ARE READY TO HELP YOU WITH ANY QUESTIONS ABOUT YOUR NEW PRODUCT WE CAN GUIDE YOU THROUGH CONNECTIONS FIRST TIME SETUP AND ANY OF THE FEATURES WE WANT YOU TO START ENJOYING YOUR NEW PRODUCT RIGHT AWAY CALL US BEFORE YOU CONSIDER RETURNING THE PRODUCT 1 800 705 2000 OR VISIT US ON THE WEB AT WWW MAGNAVOX COM IMPORTANT RETURN YOUR WARRANTY REGISTRATION CARD WITHIN 10 DAYS SEE WHY INSIDE 3121 235 21741 Return your Warranty Registration card today to ensure you receive all the benefits you re entitled to Once your MAGNAVOX purchase is registered you re eligible to receive all the privileges of owning a MAGNAVOX product So complete and return the Warranty Registration Card enclosed with your purchase at once And take advan tage of these important benefits Warranty Verification Registering your product within 10 days Owner Confirmation Your completed Warranty Registration Card confirms your right to maximum protection serves as verification of ownership in the under the terms and conditions of your MAGNAVOX warranty event of product theft or loss Congratulations on your purchase and welcome to the family Dear MAGNAVOX product owner Thank you for your confidence in MAGNAVOX You ve selected one of the best built
5. o TV Y7 o TV G o TV PG o TV 14 o TV MA TV Rating o TV Y vIV Y7 o TV G o TV PG o TV 14 TV MA Block All FV TV Rating o TVY o TV Y7 vIVG o TV PG o TV 14 o TV MA 14 or TV MA ratings sub menu is accessed press the CUR TV Rating TV Rating SOR UP A or CURSOR DOWN V F Block All Block All button to select one of the options i 5 i E Block All V S L D or FV TV Rating 5 If the TV Y7 TV PG TV 14 or Block All S S L L D D ton on the remote to turn the option 6 Press the CURSOR RIGHT p but ON or OFF TV Ratings and Rating Sub Menus Some models refer to SmartLock as AutoLock your TV may show AutoLock When a TV Rating is selected to block ALL higher ratings will be blocked also instead of SmartLock in the on screen menu These features are the same TV Y All children This program is designed to be appropriate for all children Designed for a very young audience including children ages 2 6 This type of programming is not expected to frighten younger children TV Y7 Directed to Older Children This program is designed for children age 7 and above It may be more appropriate for children who have acquired the development skills needed to distinguish between make believe and rea
6. Press the CURSOR RIGHT but ton to display the FEATURES menu options Press the CURSOR UP A or DOWN button until SmartLock is highlighted Press the CURSOR RIGHT but ton The screen will prompt you for your Access Code Using the NUMBERED buttons on the remote enter your 4 digit Access Code The SmartLock menu options will be displayed Press the CURSOR UP A or DOWN Y button to highlight the words MOVIE RATINGS Press the CURSOR RIGHT but ton to display the MOVIE RATINGS options PG 13 R NCI7 or X Press the CURSOR UP A or DOWN Y button to highlight any of the Movie Ratings options When high lighted all these options can be turned ON which will allow blocking or OFF which will allow viewing Use the CURSOR RIGHT but ton on the remote to turn the rating option ON or OFF 1 2 3 4 5 6 7 8 9 0 Some models refer to SmartLock as AutoLock your TV may show AutoLock instead of SmartLock in the on screen menu These features are the same HELPFUL HINT When a rating is set to block all higher ratings will be automatically blocked as well Example If the the PG 13 rating is set to block the NC 17 and X ratings will also be blocked Main v Picture Brightness Sound Color Features Picture Install Sharpness Tint More BLOCKING PROGRAMS BASED ON MOVIE RATINGS
7. 21 22 Objects have fallen or liquid has been spilled into the appli ance or The appliance has been exposed to rain or The appliance does not appear to operate normally or exhibits a marked change in performance or The appliance has been dropped or the enclosure damaged jm on Tilt Stability All televisions must comply with recommended international global safety standards for tilt and stability proper ties of its cabinet design Do not compromise these design standards by applying exces sive pull force to the front or top of the cabinet which could ultimately overturn the product Also do not endanger yourself or children by placing electron ic equipment toys on the top of the cabinet Such items could unsuspectingly fall from the top of the set and cause product damage and or personal injury Wall or Ceiling Mounting The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer Power Lines An outdoor antenna should be located away from power lines Outdoor Antenna Grounding If an outside antenna is con nected to the receiver be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges Section 810 of the National Electric Code ANSI NFPA No 70 1984 provides information with respect to proper grounding of the mast and supporting structure grounding of the lead in wire to
8. Brightness Sound Color Features Picture Install Sharpness Tint More SMART PICTURE SOUND MAGNAVOX 20 How To USE THE FORMAT CONTROL EXPAND 4 3 Main Picture SmartLock Sound Format v Features Install E ___ Features a SmartLock v Format 43 Features SmartLock Format Expand 4 3 4 3 UNDERSTANDING THE SMARTLOCK CONTROLS martLock AutoLock processes program content advisories from broadcasters SmartLock can respond to the content advisories and block program content that may be found objectionable such as offensive language violence sexual situations etc This is a great feature to censor the type of viewing children may watch Over the next few pages you ll learn how to block channels and certain rated programming Below is a brief explanation of some terms and ratings you will find in the SmartLock feature SmartLock offers various BLOCK ING controls from which to choose Access Code An Access Code must be set to prevent children from unblocking questionable programming Channel Block Individual channels including the A V inputs can be blocked Clear All Allows you clear all channels being blocked from your viewing set with the Channel Block Control Block All Allows you to block ALL channels and A V inputs at one time Movie R
9. Jack Panel Back of Cable Box IN from the Cable Company o CABLE TO TV IN OUTPUT CH Round 752 Coaxial Cable SS Jack Panel Back of TV NEL SWITCH on the back of the cable box to Cable Box Connection with Audio Video Outputs CH 3 or 4 then tune the TV to the corre sponding channel Once tuned change chan nels at the cable box not the television Cable Box w Audio Video Outputs This connection will supply Stereo sound to the TV Connect the open end of the round Cable Company supplied cable to the cable signal IN put plug on the back of the Cable Box Using a RCA type Video Cable con 5 nect one end of the cable to the Video or ANT your cable box may be labeled differently Out jack on the cable box and the other end to the AV1 Video Input on the TV Using a RCA type Audio Left and Right 6 Cable connect one end to the left and right Audio Out L amp jacks on the cable box Connect the other end to the AV1 Audio L R Input jacks on the TV NOTE Use the Channel or buttons on the TV remote control to tune to the AV1 channel for the cable box signal Once tuned change channels at the cable box not the tele vision Cable Signal IN from the Cable Company Jack Panel Back of Cable Box Cable Box with Audio Video Outputs RCA type
10. buttons to scroll the Picture fea tures and highlight the control you wish to adjust Brightness Color Picture Sharpness Tint Color Temp or Contrast Press the CURSOR RIGHT or the CURSOR LEFT lt q buttons to adjust the selected control or to make selections for the chosen control 6 Press the CURSOR UP A or A W N UT DOWN buttons to select and adjust other Picture Menu controls When finished press the STA TUS EXIT button to remove the menu from the TV s screen Main a remote to display the on screen menu v Picture Sound Brightness Color Features Picture Install Sharpness Tint HELPFUL HINT BRIGHTNESS Press the gt or lt q but tons until darkest parts of the picture are as bright as you prefer COLOR Press the gt or 4 buttons to add or eliminate color PICTURE Press the gt or lt q buttons until lightest parts of the picture show good detail SHARPNESS Press the gt or lt q but tons to improve detail in the picture TINT Press the gt or buttons to obtain natural skin tones COLOR TEMP Press the gt or q but tons to select NORMAL COOL or WARM picture preferences NORMAL will keep the whites white COOL will make the whites bluish and WARM will make the whites reddish DNR Press the gt or buttons to turn DNR ON or OFF Dynamic Noise Reduction helps to eliminate noise from the
11. Block All Movie Rating TV Rating When highlighted each feature can be turned ON or OFF using the CUR SOR RIGHT or LEFT lt q but tons on the remote O O O N ub Y N A Some models refer to SmartLock as AutoLock your TV may show AutoLock instead of SmartLock in the on screen menu These features are the same Block All Movie Rating TV Rating v Blocking Options v Blocking Options 4 Blocking Options 4 Blocking Options 4 v Blocking On Blocking 9 Unrated No Rating v Unrated No Rating Blocking Unrated v No Rating BLOCKING OPTIONS BLOCKING This is what might be called the master switch for SmartLock When in the ON position ALL blocking censoring will take place When in the OFF position ALL blocking is disabled UNRATED ALL unrated programs based on the Movie Ratings or Parental TV Guidelines can be blocked if this feature is set to ON and the BLOCKING feature is set to OFF NO RATING ALL programming with NO content advisory data can be blocked if this feature is set to ON and the BLOCKING feature is set to OFF 28 SETTING THE SLEEPTIMER CONTROL you ever fallen asleep in front of the TV only to have it wake you up at two in the morning with a test pattern screeching in your ears Well your TV can save yo
12. Channel Edit MAGNAVOX 15 Install a Language Tuner Mode Cable gt Auto Program Channel Edit Install Language v Tuner Mode Auto gt Auto Program Channel Edit How AUTOMATICALLY PROGRAM CHANNELS Yo TV can automatically set itself for local area or Cable TV channels This makes it easy for you to select only the TV stations in your area when the CHANNEL or buttons are pressed Note Make sure the antenna or cable signal con nection has been completed before AUTO PRO GRAM is activated Press the MENU button on the remote to show the on screen menu Press the CURSOR UP A or DOWN buttons to scroll through the on screen menu until the word INSTALL is highlighted Press the CURSOR RIGHT gt button to display the INSTALL menu features Press CURSOR UP A or DOWN buttons to scroll the Install fea tures until the words AUTO PRO GRAM are highlighted Press the CURSOR RIGHT button to start the Auto Program scanning of channels Auto Programming will store all available channels in the TV s memory then tune to the lowest available channel when done U AW N When finished press the STA TUS EXIT button to remove the menu from the TV s screen HELPFUL HINT When CABLE is selected channels 1 125 are available When ANTENNA is selected channels 2 69 are available Wh
13. Connect the audio cable red and white from the Audio Left and Right Outputs on the Camera to a Stereo to Mono adapter Then plug the single end of the adapter to the Audio In white jack on the SIDE of the television 2 For Mono Devices Connect one end of the audio cable from the Audio Out jack on the device to the Audio In white jack on the SIDE of the tele vision Turn the TV and the accessory device ON Press the CH or CH buttons to set the TV to its Front channel Go to your lowest channel for example channel 1 then change channels down to find the correct source channel Ja Press the PLAY button on the accessory device to view playback or to access the accessory device cam era gaming unit etc Side A V Input Connection When headphones are used the sound coming from the TV speakers will be muted HELPFUL HINT Audio and video cables are not supplied with the TV but are available from Magnavox or electronics retailers Optional Headphones MAGNAVOX 13 Jack Panel located on the Side of TV Video Cable yellow Audio Cables red amp white L AUDIO LEFT RIGHT 7 VIDEO S VIDEO Jack Panel of Accessory Device How TO USE THE LANGUAGE CONTROL F our Spanish speaking TV owners an on screen LANGUAGE option is present With the LANGUAGE control you can set
14. Picture Sound SmartLock Format y Features 9 Install Features SmartLock Format Features Y SmartLock Access Code Format Features Features Features Y SmartLock Y SmartLock Access Code Y SmartLock Access Code Format Format XXXX Incorrect Format Features Features Features Y SmartLock Confirm Code Y SmartLock New Code SmartLock New Code o Format XX Format XXXX SmartLock a v Block Channel gt Off HELPFUL HINT Parents it isn t possible for your child to unblock a channel without knowing your access code or changing it to a new one If your code changes and you didn t change it then you know it s been altered by someone else and blocked channels have been viewed Setup Code Clear All Block All Movie Rating TV Rating 22 SmartLock Block Channel y Setup Code gt Clear All Block All Movie Rating TV Rating How TO BLOCK CHANNELS fter your personal access code has been set see previous page you are now ready to select the channel
15. options Off CC CC 2 CC Mute Dialogue and descriptions for the action on the captioned TV program will appear on screen if the tuned pro gram is broadcasting CC information When finished press the STATUS 3 EXIT button to remove the menu from the TV s screen or let the option time out and disappear from the TV screen CC Off HELPFUL HINT Not all TV programs and product commercials are made with Closed Caption CC information included Neither are all Closed Caption modes CCI or CC2 necessarily being used dur ing the transmission of a closed caption program Refer to your area s TV program listings for the stations and times of Closed Caption shows 30 SMART PICTURE SOUND How TO USE THE CLOSED CAPTIONING CONTROL 1 2 K 2 NOTE The CC MUTE option can be used to set the TV to turn the Closed Caption mode ON whenever the MUTE button on the remote is pressed This activates the option SETTING THE SMARTPICTURE CONTROL Wiener you re watching a movie or a sport ing event your TV has automatic video control settings matched for your current pro gram source or content The SmartPicture fea ture quickly resets your TV s video controls for a number of different types of programs and view ing conditions you may have in your home Each SmartPicture setting is preset at
16. sexual sit uations coarse language or suggestive dialogue R Restricted This programming is specif ically designed for adults Anyone under the age of 17 should only view this pro gramming with an accompanying parent or adult guardian lt contains one or more of the following intense violence intense sexual situations strong coarse language or intensely suggestive dialogue NC 17 No one under the age of 17 will be admitted This type of program ming should be viewed by adults only It contains graphic violence explicit sex or crude indecent language X Adults Only This type of program ming contains one or more of the follow ing very graphic violence very graphic and explicit or indecent sexual acts very coarse and intensely suggestive language v TV Y On o TV Y7 o TV G o TV PG o TV 14 o J TV PARENTAL GUIDELINES TV BROADCASTERS g md All children This pro gram is designed to be appropriate for all children Designed for a very young audience including children ages 2 6 This type of programming is not expected to frighten younger children TV Y7 Directed to Older This program is designed for children age 7 and above It may be more appropriate for children who have acquired the develop ment skills needed to distinguish between make believe and reality This program ming may include mild fantasy and comic violence FV
17. 18 Cable Box Connection 8 Cable TV Connection Basic Connection 7 Care and Cleaning 35 Channel Edit Control 17 Closed Caption 30 Color Control etka nd 18 Color Temperature Control 18 Component Video Inputs 11 Contrast F Control ui Beas linn Sea aa eos 18 Dynamic Noise Reduction DNR Control 18 Factory Service Information 38 39 Format Expand 4 3 Control 20 Glossary of Terms 5 2 42 eraris tai s i Tani eie 36 dE ai ai SA 37 Language Control 14 Picture Control o es dad 18 Remote Control Buttons 6 Remote Control Operation Basic 5 S Video Inputs it a 10 Safety Instructions 0 2 0 cece eee eee eens 3 Sharpness Control 18 Side A V Inputs osda nte Geek eg dee OEE 13 Sleeptimer Control 29 SmartLock Access Code 22 Block All Control eee eee eee 25 Block Channels Control 23 Blocking Options 28 Clear All
18. Sleeptimer automatically turns the TV OFF at preset times SmartLock feature allows you to block the viewing of cer tain channels or external audio video connections where you might not want your children viewing inappropriate material SmartPicture allows you to set the picture color tint contrast etc for various types of programming such as Sports Movies Personal Weak Signal or Multimedia with the push of a button SmartSound controls allow you to set the sound controls for various types of listening programs such as Personal sound controls the way you set them Theater Music or Voice with the push of a button Standard broadcast VHF UHF or Cable TV CATV channel capability with stereo sound Treble Boost Bass Boost and Balance controls to enhance the television s sound Some models refer to SmartLock as AutoLock your TV may show AutoLock instead of SmartLock in the on screen menu These features are the same NOTE It is possible that this owner s manual may be used with several different television models Not all features drawings discussed in this manual will necessarily match those found with your television system This is nor mal and does not require you contacting your dealer or requesting service END oOF LIFE DISPOSAL Your new television and its packing contain materials that can be recycled and reused Specialized companies can recycle your product to increase the amoun
19. Sound menu s Bass Treble AVL and Incredible Surround controls To select any of the options follow the directions below Press the SMART SOUND button 1 on the remote control The current Auto Sound setting will appear in the middle of the screen Press the SMART SOUND button repeatedly to toggle between the four settings Note Only the PERSONAL control can be changed by the viewer This changes the set tings in the main on screen menu s sound controls THEATRE Preset sound options for watching movies MUSIC Preset sound options for musical programming where there is little dialogue VOICE Preset sound options for program ming where heavy dialogue is present Some models refer to SmartSound as AutoSound These features are the same MAGNAVOX 32 How USE THE ALTERNATE CHANNEL A CH BUTTON our remote control has an Alternate Channel button that allows you to toggle between the current and previous button For instance if you are watching two games on TV you can enter the channel numbers once and flip between the two channels with the touch of only one button After entering the two channels numbers so that one is the last viewed channel and the other is the current channel follow the step below remote control The channels will toggle between the current channel and the last viewed channel 1 Press the A CH button on the AICH EXIT 3
20. TV G General Audience Most parents would find this program suitable for all ages This type of programming contains little or no vio lence no strong language and little or no sexual dialogue or situations TV PG Parental Guidance PG Suggested This program con tains material that parents may find unsuitable for younger children This type of programming contains one or more of the following Moderate violence V some sexual situations S infrequent coarse language L or some suggestive dialogue D TV 14 Parents Strongly 14 Cautioned This program con tains some material that many par ents would find unsuitable for children under 14 years of age This type of programming contains one or more of the following intense violence V intense sexual situa tions S strong coarse language L or intensely suggestive dialogue D TV MA Mature Audience MA Onlly This program is specifically designed to be viewed by adults and therefore may be unsuitable for children under 17 This type of programming con tains one or more of the following graph ic violence V explicit sexual situations S or crude indecent language L 1 21 ver the next few pages learn how to block channels and get a better understand ing of the rating terms for certain programming First let s start by learning how to set a personal access code Press the MENU button on the remote
21. allow you to con nect a second VCR to record the pro gram while your watching it Connect one end of the yellow 3 Video Cable to the Monitor out VIDEO plug Connect the other end to the VIDEO IN plug on the second VCR Connect one end of the red and 4 white Audio cable from the Monitor out AUDIO L and R plugs on the TV to the AUDIO IN plugs on the VCR Turn the Second VCR ON insert 5 a VHS tape and it s ready to record what s being viewed on the TV screen USING THE MONITOR OUT PUT JACKS Jack Panel Located on the back of the TV 7501 Audio Cables lt AV OUT Red amp White AUDIO L eft and R ight INPUT PHONO INPUT Audio System with Audio Inputs Jack Panel Located on the back of the TV Monitor OUT VIDEO amp AUDIO L eft and R ight ANT 7501 Ya S VIDEO Audio Cables Red amp White Video Cable Yellow Second VCR First VCR accessory device Hookup from Page 9 12 USING THE SIDE AUDIO VIDEO INPUTS V and Video Side Inputs are available for a quick connection of a VCR to playback video from a camera or attach a gaming device Use the AV button on the remote control to tune these inputs 1 Connect the video yellow cable from the Video output on the Camera or accessory device to the Video yellow Input located on the SIDE of the TV For Stereo Devices
22. best backed products available today We ll do everything in our power to keep you happy with your purchase for many years to come As a member of the MAGNAVOX family you re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry What s more your purchase guarantees you ll receive all the information and special offers for which you qualify plus easy access to accessories from our convenient home shopping network Most importantly you can count on our uncompromising commitment to your total satisfaction All of this is our way of saying welcome and thanks for investing in a MAGNAVOX product P S Remember to get the most from your MAGNAVOX product you must return your Warranty Registration Card within 10 days So please mail it to us right now Model Registration Returning your Warranty Registration Card right away guarantees you ll receive all the information and special offers which you qualify for as the owner of your model Know these safetysymbois CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This bolt of lightning indicates uninsulated material within your unit may cause an electrical shock For the safety of everyone in your household please do not remove product covering Th
23. default code or a way to reset the code when the current access code is not known Picture SmartLock Sound Format y Features 9 Install Features y SmartLock Format Features Y SmartLock Access Code Format Features SmartLock a SmartLock a Y SmartLock Access Code v Block Channel__ Off v Block Channel__ On Format XXXX Setup Code Clear All Block Alll Movie Rating 9 TV Rating Setup Code Clear All Block All Movie Rating TV Rating Channel 12 Blocked By SmartLock Channel Blocking oe blocked with Block Channel HELPFUL HINT If you tune to a blocked channel and enter your Access Code to view the channel ALL blocked channels will be viewable until the TV has been turned off When the TV is powered back ON the previously blocked channels will be blocked again 23 Enter your Access Code to view a tuned channel that is fter blocking specific channels there may come a time when you want to clear all the channels so they can be viewed The following steps explain how to CLEAR ALL blocked chan nels Press the MENU button on the remote to show the on screen menu Press the CURSOR UP A or DOWN Y button until the word F
24. you reside in one of our Philips Factory Service Branch areas see directory on back you can contact the nearest Service Branch to obtain efficient and expedient repair for your product If your product is In Warranty you should have proof of purchase to ensure No Charge Service For Out of Warranty service call the location nearest you NOTA Si vous r sidez dans une des r gions desservies par une succursale de service apr s vente du fabricant Philips voir liste ci dessous vous pourrez contacter la branche de service apr s vente la plus pr s de chez vous pour obtenir un service apr s vente rapide et efficace Si le produit est sous garantie il suffira de pr senter une preuve d achat pour b n ficier d un service sans frais Pour les produits non couverts par la garantie con tactez le centre le plus pr s de chez vous NOTA Si Ud reside en una de nuestras zonas para sucursales Philips de servicio al de fabrica ver directorio mas abajo Ud puede comunicarse con la sucursal de servicio m s cercana para obtener una reparaci n oportuna y eficaz de su producto Si su producto est todavia bajo garant a Ud debe presentar comprobante de compra para no ocasionar ningunos cargos por servicio Para servicio despu s del vencimiento de la garant a llame al lugar m s cercano de los abajo indicados In Canada How you can obtain efficient and expedient carry in mail in or in home service for your product Please contact Philips at 1 800
25. 3 Mi SURF SMART PICTURE SOUND No Power e Check the TV power cord Unplug the TV wait 10 sec onds then reinsert the plug into the outlet and push the POWER button again e Check that the outlet is not on a wall switch Be sure the fuse is not blown on the AC power strip if one is being used No Picture e Check antenna connections Are they properly secured to the TV s 750 plug Check the TUNER MODE control for the correct tuner setting Try running the Auto Program feature to find all available channels e Press the AV button on the remote to make sure the cor rect signal source is selected FRONT or Current Channel No Sound e Check the VOLUME buttons Check the MUTE button on the remote control e If you re attempting to hook up auxiliary equipment check the audio jack connections located on the front of the TV TROUBLESHOOTING Remote Does Not Work Check the batteries If necessary replace them with 2 AA Heavy Duty Zinc Chloride or Alkaline batteries Clean the remote control and the remote control sensor window on the TV Check the TV power cord Unplug the TV wait 10 sec onds then reinsert the plug into the outlet and push the POWER button again Be sure the fuse is not blown on the AC power strip if one is being used Check to be sure the TV outlet is not on a wall switch TV Displays Wrong Channel or No Channels Above 13 34 Repeat ch
26. 661 6162 French speaking 1 800 531 0039 English or Spanish speaking Au Canada Comment obtenir le service apr s vente pour les produits apport s ou envoy s par la poste a notre centre de service ou le service a domicile Veuillez contacter philips 1 800 661 6162 Francophone 1 800 531 0039 Anglais ou Espagnol En el Canad C mo recibir servicio efficiente para su producto en persona por correo o a domicillo Favor de comunicarse con Philips al 1 800 661 6162 franc fono 1 800 531 0039 Ingl s o Espa ol Rev GG 11 20 2002 38 FACTORY SERVICE LOCATIONS LON QUALITY SERVICE IS AS CLOSE AS YOUR TELEPHONE SIMPLY LOOK OVER THE LIST BELOW FOR THE NUMBER OF A FACTORY SERVICE CENTER NEAR YOU YOUR PRODUCT WILL RECEIVE EFFICIENT AND EXPEDIENT CARRY IN MAIL IN OR IN HOME SERVICE AND YOU WILL RECEIVE PEACE OF MIND KNOWING YOUR PRODUCT IS BEING GIVEN THE EXPERT ATTENTION OF PHILIPS FACTORY SERVICE COMMENT OBTENIR NOTRE SERVICE APRES VENTE RAPIDE ET EFFICACE SOIT PAR COURRIER A DOMICILE OU EN SE PRESENTANT A UN CENTRE DE SERVICE PHILIPS PLUS DE 600 CENTRES DE RECEPTION DE PRODUITS A R PARER A TRAVERS LE PAYS CONTACTER LE CENTRE DE SERVICE AUX CONSOMMATEURS LE PLUS PROCHE POUR SAVOIR L EMPLACEMENT DE CES DEPOTS DANS UN RAYON DE 50 75 MILES 80 A 120 KM DU CENTRE DE SERVICE LOCAL COMO OBTENER UN SERVICIO OPORTUNO Y EFICIENTE POR CORREO EN CASA 0 EN PERSONA PARA SU PRODUCTO A TRAVES DE UN CENTRO PHILIPS DE SE
27. CABLE or AUTO mode It s impor tant for the TV to know what type of signal that is connected From a Cable TV signal or a nor mal Antenna signal In the AUTO mode when the AUTO PROGRAM feature is activated the TV will automatically choose the correct mode Press the MENU button on the remote to show the on screen menu Press the CURSOR UP A or DOWN buttons to scroll through the on screen menu until the word INSTALL is highlighted Press the CURSOR RIGHT gt button to display the INSTALL menu features Press CURSOR UP A or DOWN buttons to scroll the Install fea tures until the words TUNER MODE is highlighted Press the CURSOR RIGHT p gt button to select either ANTENNA CABLE or AUTO mode When finished press the STA TUS EXIT button to remove the on screen menu from the TV s screen O A W N Main Brightness Sound Color Features Picture Install Sharpness Tint HELPFUL HINT are available When ANTENNA is selected channels 2 69 are available When AUTO is selected the TV will auto matically set itself to the correct mode based on the type of signal it detects when the AUTO PROGRAM feature is activated When CABLE is selected channels 1 125 Main a Picture Language Sound Tuner Mode Features Auto Program v Install gt Channel Edit Oo gt Install Language Tuner Mode Antenna_ gt Auto Program
28. EATURES is highlighted Press the CURSOR RIGHT button to display the FEATURES menu options Press the CURSOR UP A or DOWN Y button until the words SmartLock are highlighted Press the CURSOR RIGHT p gt button Enter the correct access code number X XXX shows on the Access Code display as you press the NUMBERED buttons SmartLock menu options will be displayed Press the CURSOR UP A or DOWN Y buttons until the words CLEAR ALL are highlighted Press the CURSOR RIGHT button to clear all blocked channels The Clear All option will read Cleared auh Y N When finished press the STA TUS EXIT button to remove the menu from the TV s screen Some models refer to SmartLock as AutoLock your TV may show AutoLock instead of SmartLock in the on screen menu These features are the same Main y Picture Sound Features Install Brightness Color Picture Sharpness Tint More NOTE The 0 7 1 1 access code shown on this page is the default code or a way to reset the code when the current access code is not known How To CLEAR ALL BLOCKED CHANNELS AT THE SAME TIME Main Picture Sound SmartLock Format Features Install Features y SmartLock Format Features Y SmartLock Access Code Format
29. ED You must have proof of purchase to receive warranty service A sales receipt or other document showing that you purchased the product is considered proof of purchase WHAT IS COVERED Warranty coverage begins the day you buy your product Far 90 cays thereafter all parts will be repaired or replaced free and labor is free From 90 days to one year from the day of pur chase all parts will be repaired or replaced free but you pay for all labor charges After one year from the day of purchase you pay for the replacement or repair of all parts and for all labor charges All parts including repaired and replaced parts are covered only for the original warranty period When the warranty on the product expires the warranty on all replaced and repaired parts also expires WHAT IS EXCLUDED Your warranty does not cover e labor charges for installation or setup of the product adjust ment of customer controls on the product and installation or repair of antenna systems outside of the product e product repair and or part replacement because of misuse accident unauthorized repair or other cause not within the control of Magnavox reception problems caused by signal conditions or cable or antenna systems outside the unit e a product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed manufactured approved and or authorized or repair of products
30. LLATION Remove the battery compart ment lid on the back of the remote Place the batteries 2 AA in the 6 remote Be sure the and ends of the batteries line up correctly inside of case is marked 7 Reattach the battery lid HELPFUL HINT Remember the tuned channel number will always briefly appear when the TV 15 first turned ON and with channel changes You can also press the STATUS EXIT but ton on the remote to see what channel the TV is ON DESCRIPTION OF REMOTE CONTROL BUTTONS NUMBER Buttons Press the Number buttons to select TV channels or to enter values in the menu For single digit channels press the Number button for the channel you want The TV will pause briefly before going to the chosen channel AICH Button Alternate Channel Press to switch between the last channel and the present channel Details are on page 33 STATUS EXIT Button Press to see the current channel number Press to remove a menu CC Button Press to activate Closed Captioning Details are on page 30 SLEEP Button Press to set the TV to turn itself off within a certain time Details are on page 29 Note This button is dedicated to SmartSurf features within certain TV models This TV does not contain the SmartSurf features so therefore the button will have no functionality when pressed POWER button Press to turn the TV on or o
31. N and a prerecorded tape CD DVD etc inserted press the PLAY button to view the tape on the television OU AF W Nam HELPFUL HINT Audio and video cables are not supplied with the TV but are available from Magnavox or electronics retailers cul Back of TV ANT 7501 SLEEP MAGNAVOX POWER AVI Connection ANT CABLE S VIDEO OUT OUT AUDIO OUT OUT Back of VCR VCR One or accessory device Equipped with Audio and Video Video Output Jacks PAN Yellow AV2 Audio In Connection Red and White VCR Two accessory device i 5 Equipped with Video and Audio Output Jacks USING THE S VIDEO INPUT JACKS S uper Video connection on the rear of the TV can provide you with better picture detail and clarity for the playback of accessory sources such as DBS digital broadcast satellite DVD digital video discs video games and S VHS VCR video cassette recorder tapes than the normal antenna picture connections NOTE The accessory device must have an S VIDEO OUT put jack in order for you to com plete the connection on this page CABLE to the S VIDEO jack on the back of the TV Then connect one end the AUDIO red and white CABLES to the AV2 in AUDIO L and R left and right jacks on the rear of the TV 1 Connect one end of the S VIDEO Connect
32. RVICIO MAS DE 600 SITIOS POR TODO EL PAIS PARA LA RECEPCION DE PRODUCTOS NECESITADOS DE REPARACIONES COMUNICARSE CON EL CENTRO DE SERVICIO DE FABRICA MAS CERCANO PARA ESTOS LUGARES DENTRO DE UN RADIO DE 80 A 120 KM 50 A 75 MILLAS DEL CENTRO DE SERVICIO LOCAL ATLANTA Philips Factory Service 550 Franklin Road Suite F Marietta GA 30067 800 273 1501 TAMPA Philips Factory Service 1911 US Highway 301 North Suite 100 Tampa FL 33619 800 442 2027 SAN FRANCISCO Philips Factory Service 681 East Brokaw Rd San Jose CA 95112 800 300 9013 HOUSTON Philips Factory Service 1110 N Post Oak Rd Suite 100 Houston TX 77055 800 952 3254 CLEVELAND Philips Factory Service 950 Keynote Circle Brooklyn Heights OH 44131 800 331 7037 DETROIT Philips Factory Service 25173 Dequindre Madison Heights MI 48071 800 438 1398 DALLAS Philips Factory Service 415 N Main Street 107 Euless TX 76040 800 952 3254 LOS ANGELES Philips Factory Service 20930 Bonita Ste V Carson CA 90746 800 300 9013 39 CHICAGO Philips Factory Service 1279 W Hamilton Pkwy Itasca IL 60143 800 531 2922 KNOXVILLE Philips Factory Service One Philips Drive Knoxville TN 37914 800 821 1767 PHILADELPHIA Philips Factory Service 352 Dunks Ferry Rd Bensalem PA 19020 800 847 9320 LIMITED WARRANTY COLOR TELEVISION 90 Days Free Labor One Year Parts Exchange This product can be repaired in home WHO IS COVER
33. Sound A 19 Sound a Treble Boost Bass Boost Balance AVL v Sound Stereo any times while watching movies from a DVD player the image is shown in letter box format This is the format that is shown in movie theaters When shown on a TV screen the image will have areas of black on top and bottom of the screen Press the MENU button on the remote to display the on screen menu Press the CURSOR DOWN V button until the word FEATURES is highlighted Press the CURSOR RIGHT button to display the FEATURES menu options SmartLock or Format Press the CURSOR DOWN V button until the word FORMAT is highlighted Press the CURSOR RIGHT or CURSOR LEFT lt q buttons to select one of the two options 4 3 or Expand 4 3 4 3 Standard format for the TV Expand 4 3 Enlarges the picture to fill out the entire screen area eliminat ing the letter box effect kh WN When finished press the STA TUS EXIT button to remove the menu from the TV s screen Note The Expand 4 3 format can also be activated using the CURSOR UP A or DOWN buttons when the onscreen menu is not being displayed Pressing these buttons will toggle the standard 4 3 format and the Expand 4 3 format Some models refer to SmartLock as AutoLock your TV may show AutoLock instead of SmartLock in the on screen menu These features are the same Main a y Picture
34. Video Cable VIDEO AUDIO OUT OUT Cables ANT 7501 COMPONENT VIDEO INPUT Jack Panel Back of TV RCA type Audio Left and Right 50000 USING THE AV1 IN OR IN INPUT JACKS D e audio video input jacks are for direct picture and sound connections between the TV and a VCR or similar device that has audio video output jacks Both the AV1 and AV2 Input Jack connections are shown on this page but either one can be connected alone Follow the easy steps below to connect your accessory device to the AV1 and AV2 IN Jacks located on the back of the Connect the VIDEO yellow cable to the VIDEO AV1 IN or AV2 IN jack on the back of the TV Connect the AUDIO red and white cables to the AUDIO left and right AV1 IN or AV2 in jacks on the rear of the TV Connect the VIDEO yellow cable to the VIDEO OUT jack on the back of the VCR either one or two or accessory device being used Connect the AUDIO red and white cables to the AUDIO left and right OUT jacks on the rear of the VCR either one or two or acces sory device being used Turn the VCR either one or two or accessory device and the TV ON Press the CH or CH buttons to set the TV to its AV1or AV2 chan nel Go to your lowest channel for example channel 1 then change channels down to find the correct input With either of the VCRs or accessory devices O
35. With the Block All control ALL avail able channels including the A V Inputs can be set to be blocked at the same time Press the MENU button on the remote to show the on screen menu Press the CURSOR UP A or DOWN Y button until the word FEATURES is highlighted Press the CURSOR RIGHT button to display the FEATURES menu options Press the CURSOR UP A or DOWN Y button until the words SmartLock are highlighted Press the CURSOR RIGHT button Enter the correct access code number XXXX shows on the Access Code display as you press the NUMBERED buttons SmartLock menu options will be displayed Press the CURSOR UP A or DOWN Y buttons until the words BLOCK ALL are highlighted Press the CURSOR RIGHT p gt button to turn Block All ON or OFF When ON is selected ALL available channels will be blocked When finished press the STA TUS EXIT button to remove the menu from the screen ON UID Y N Some models refer to SmartLock as AutoLock your TV may show AutoLock instead of SmartLock in the on screen menu These features are the same HELPFUL HINT If you tune to a blocked channel and enter your Access Code to view the channel ALL blocked channels will be viewable until the TV has been turned off When the TV is powered back ON the previously blocked channels will be blocked again Main v Picture Brightness Sound Color Features Picture Inst
36. all Sharpness Tint More NOTE The 0 7 1 l access code shown on this page is the default code or a way to reset the code when the current access code is not known Main a Picture SmartLock Sound Format v Features 9 Install Features a vSmartLock gt Format Features Y SmartLock Access Code Format rere Features SmartLock SmartLock a Y SmartLock Access Code Block Channel Format XXXX Setup Code Clear All 9 Block Channel Setup Code Clear All v Block v Block All Movie Rating TV Rating Movie Rating TV Rating Channel 12 Blocked By SmartLock Channel Blocking 25 Enter your Access Code to Access Code view a tuned channel that is blocked with Block Channel ma o are two types of program ratings within the SmartLock feature One is based on the Movie Industry ratings while the other is based on the TV Industry ratings Both can be used to block or censor programming that has been rated in either manner Let s first look at the Movie Rating options of SmartLock Press the MENU button on the remote to display the on screen menu Press the CURSOR UP A or DOWN button until the word FEATURES is highlighted
37. an antenna discharge unit size of grounding connectors loca tion of antenna discharge unit connection to grounding elec trodes and requirements for the grounding electrode See Figure below Object and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings Battery Usage CAUTION To prevent battery leakage that may result in bodily injury property damage or damage to the unit Install all batteries correctly with and aligned as marked on the unit Do not mix batteries old and new or carbon and alkaline etc Remove batteries when the unit is not used for a long time building as close to the point of cable entry as practical Note to the CATV system installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the Example of Antenna Grounding as per NEC National Electric Code GROUND CLAMP ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT nec section 810 20 GROUNDING CONDUCTORS nec section 810 21 GROUND CLAMPS ELECTRIC SERVICE EQUIPMENT POWER SERVICE GROUNDING ELECTRODE SYSTEM nec ART 250 PART H CONTENTS Introduction Welcome TV Registration 2 Sa
38. annel selection Add the desired channel numbers using the CHANNEL EDIT control into the TV s memory Check to be sure the TUNER MODES are set to the CABLE option and run the Auto Program feature to find all available channels CARE AND CLEANING Afl WARNING Concerning Stationary Images on the TV Screen Do not leave stationary or letterbox images on screen for extended periods of time This can cause uneven picture tube aging Normal use of the TV should involve the showing of pictures that contain constantly moving and changing images that fill the screen Be careful not to leave nonmoving images on screen for extended periods of time or to display the same images on screen too frequently because subtle ghost images can be left on the picture tubes Sources of stationary images may be DVD disks laser disks video games CD i disks videotapes digital television boxes broadcast channels cable channels satellite channels and others Here are some examples of stationary images this is not an all inclusive list you may encounter others in your viewing DVD menus listings of DVD disk content Letterbox black bars shown at the top and bottom of the TV screen when a wide screen 16 9 movie is viewed ona TV with standard 4 3 aspect ratio Video game images and scoreboards Television station logos present a problem if they are bright and stationary moving or low contrast graphics are less likely to caus
39. anties of merchantability and fit ness for a particular purpose are limited in duration to the duration of this express warranty But because some states do not allow limitations on how long an implied warranty may last this limitation may not apply to you TO GET WARRANTY SERVICE IN CANADA Please contact Magnavox at 1 800 705 2000 In Canada this warranty is given in lieu of all other warranties No other warranties are expressed or implied including any implied warranties of merchantability or fitness for a particular purpose Magnavox is not liable under any circumstances for any direct indirect special incidental or consequential damages howsoever incurred even if notified of the possibility of such damages REMEMBER Please record below the model and serial numbers found on the product Also please fill out and mail your warranty registra tion card promptly It will be easier for us to notify you if nec essary MODEL SERIAL This waranty gives you aif ic lel igts You may have other r igts which wa yfran state pr ovine to tter vie Magnavox P O Box 520890 Miami FL 33152 402 536 4171 EL6570E001 10 03 Printed in China
40. atings Block programming based on ratings patterned by the Motion Pictures Association of America TV Ratings Block programming based on standard TV ratings set by TV broad casters To learn more about the Motion Picture Ratings and the TV Ratings refer to the definitions listed on the columns to the right Press the STATUS EXIT button twice to display the SmartLock review screen This screen shows what is activated within the SmartLock settings gt Movie Rating Unrated No Rating Off Some models refer to SmartLock as AutoLock your TV may show AutoLock instead of SmartLock in the on screen menu These features are the same Movie Rating 4 e Movie RATINGS MOTION PICTURE ASSOCIATION OF AMERICA G General Audience All ages admit ted Most parents would find this pro gram suitable for all ages This type of programming contains little or no vio lence no strong language and little or no sexual dialogue or situations PG Parental Guidance Suggested This programming contains material that parents may find unsuitable for younger children lt may contain one or more of the following Moderate violence some sexual situations infrequent coarse lan guage or some suggestive dialogue PG 13 Parents Strongly Cautioned This programming contains material that parents may find unsuitable for children under the age of 13 It contains one or more of the following violence
41. ch allows for improved color bandwidth information not possi ble when using composite video or S Video con nections Connect the Component Y Pb Pr Video OUT jacks from the DVD player or similar device to the Y Pb Pr in put jacks on the TV When using the Component Video Inputs it is best not to connect a signal to the AV1 IN Video Jack Connect the red and white AUDIO CABLES to the Audio left and right output jacks on the rear of the accessory device to the Audio L and AV1 IN Input Jacks on the TV Turn the TV and the DVD or digital accessory device ON N Press the CH or CH buttons to set the TV to its CVI channel Go to your lowest channel for example channel 1 then change channels down to find the correct source channel bs Insert a DVD disc into the DVD player and press the PLAY button on the DVD Player HELPFUL HINT The description for the component video connectors may differ depending on the DVD player or accessory digital source equipment used for example Y Pb Pr Y B Y R Y Y Cr Cb Although abbrevia tions and terms may vary the letters b and r stand for the blue and red color compo nent signal connectors and Y indicates the luminance signal Refer to your DVD or digital accessory owner s manual for defini tions and connection details Note Component video and audio cables are not supplied with the TV but are avail able from Magnavox or elec
42. cture Brightness Sound Color Press the MENU button on the Sous Picture Install Sharpness remote to show the on screen menu Tint More Main Press the CURSOR UP A or PEE Sian DOWN button until the word Sound Format FEATURES is highlighted Press the CURSOR RIGHT p gt button to display the FEATURES menu options Press the CURSOR UP A or DOWN button until the words SmartLock are highlighted Q Features y SmartLock Press the CURSOR RIGHT gt Format button Enter the correct access code number XXXX shows on the Access Code display as you press the NUMBERED buttons SmartLock menu options will be displayed Press the CURSOR UP A or DOWN Y buttons until the words BLOCKING OPTIONS are high lighted Press the CURSOR RIGHT button to display the Blocking Options BLOCKING UNRAT ED or NO RATING menu Press the CURSOR UP A or SmanLock a 5 a DOWN buttons to highlight the y SmartLock Access Code v Block Channel Off Setup Code Features Y SmartLock Format Access Code NOTE Remember if you ever for get your Access Code the 0 7 1 1 access code is the default code or a way to reset the code when the current access code is not known Format XXXX Setup Code Clear All desired feature CLEAR
43. damaged by these modifica tions e incidental or consequential damages resulting from the prod uct Some states do not allow the exclusion of incidental or consequential damages so the above exclusion may not apply to you This includes but is not limited to prerecorded material whether copyrighted or not copyrighted a product used for commercial or institutional purposes WHERE IS SERVICE AVAILABLE Warranty service is available in all countries where the product is officially distributed by Magnavox In countries where Magnavox does not distribute the product the local Magnavox service organization will attempt to provide service although there may be a delay if the appropriate spare parts and technical manual s are not readily available MAKE SURE YOU KEEP Please keep your sales receipt or other document showing proof of purchase Attach it to this owner s manual and keep both nearby Also keep the original box and packing material in case you need to return your product BEFORE REQUESTING SERVICE Please check your owner s manual before requesting service Adjustments of the controls discussed there may save you a service call TO GET WARRANTY SERVICE IN U S A PUERTO RICO OR U S VIRGIN ISLANDS Contact a Magnavox factory service center see enclosed list or authorized service center to arrange repair In U S A Puerto Rico and U S Virgin Islands all implied war ranties including implied warr
44. e exclamation point calls atten tion to features for which you should read the enclosed literature closely to prevent operating and mainte nance problems WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOIS TURE CAUTION To prevent electric shock match wide blade of plug to wide slot fully insert ATTENTION Pour viter les choc lectriques introduire la lame la plus large de la fiche dans la borne corre spondante de la prise et pousser jusqu au fond For Customer Use Enter below the Serial No which is located on the rear of the cabinet Retain this information for future reference Model No Serial No Visit our World Wide Web Site at http www magnavox com IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with a dry cloth Do not block any of the ventilation openings Install in accor dance with the manufacturers instructions 8 not install near any heat sources such as radiators heat regis ters stoves or other apparatus including amplifiers that pro duce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and third grounding prong The wide blade or thi
45. e uneven aging of the picture tube Stock market tickers presented at the bottom of the TV screen Shopping channel logos and pricing displays bright and shown constantly or repeatedly in the same location on the TV screen 35 PLACEMENT OF THE TV To avoid cabinet warping cabinet color changes and increased chance of set failure do not place the TV where temperatures can become excessively hot for example in direct sunlight or near a heating appliance Be sure to allow a free flow of air to and from the perforat ed back cover of the set CLEANING To avoid possible shock hazard be sure the TV is unplugged from the electrical outlet before cleaning Regularly dust the TV with a dry nonscratching duster to keep the TV clean When cleaning the TV take care not to scratch or damage the screen surface Avoid wearing jewelry or using anything abrasive Do not use household cleaners Wipe the front screen with a clean cloth dampened with water Use even easy vertical strokes when cleaning Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool clear water and a mild soap or detergent Use a clean dry cloth to dry the wiped surfaces Occasionally vacuum the ventilation holes or slots in the back cover of the set Never use thinners insecticide sprays or other chemicals on or near the cabinet as they might cause permanent marring of the cabinet finish Auto Programmi
46. en AUTO is selected the TV will auto matically set itself to the correct mode based on the type of signal it detects when the AUTO PROGRAM feature is activated Main a Picture Brightness Sound Color Features Picture Install Sharpness Tint SMART Picture Language Sound Tuner Mode Features Auto Program v Install gt Channel Edit PICTURE SOUND MAGNAVOX 16 Install Language Tuner Mode v Auto Program gt Channel Edit 25 Auto Program Channel 12 00000000000000000000 Auto Program Channel 13 00000000000000000 Auto Program Channel 14 000000000000000000000 How TO ADD OR DELETE CHANNELS Y hannel Edit makes it easy for you to ADD or DELETE channels from the list of channels stored in the TV s memory kh W N co Press the MENU button on the remote to show the on screen menu Press the CURSOR UP A or DOWN buttons to scroll through the on screen menu until the word INSTALL is highlighted Press the CURSOR RIGHT p gt button to display the INSTALL menu features Press the CURSOR UP or DOWN Y buttons to scroll the Install features until the words CHANNEL EDIT are highlighted Press the CURSOR RIGHT button to display the CHANNEL EDIT options With the CHANNEL EDIT options displayed and CHANNEL NO highlighted
47. enter the channel number with the NUMBERED or the CH or buttons you wish to add Skipped OFF or delete Skipped ON from the TV s memory Using the CURSOR DOWN V button scroll the menu to highlight the word SKIPPED Now use the CURSOR RIGHT p gt button to toggle between ON or OFF If ON is selected the channel is skipped when scrolling channels with the CH or buttons If OFF is selected the channel is not skipped when scrolling channels with the CH or buttons When finished press the STA TUS EXIT button to remove the menu from the TV s screen Brightness Sound Color Features Picture 9 Install Sharpness Tint More MAGNAVOX 17 9 Picture Language Sound Tuner Mode Features Auto Program v Install gt Channel Edit Install Language Channel No Tuner Mode Skipped Auto Program Channel Edit gt Eb y Channel Edit v Channel No Skipped Channel Edit Channel No v Skipped gt Channel Edit Channel No v Skipped gt adjust your TV picture controls select a channel and follow the steps shown below Press the MENU button on the Press the CURSOR UP A or DOWN Y buttons until the word PICTURE is highlighted Press the CURSOR RIGHT button to display the PICTURE menu features Press CURSOR UP A or DOWN
48. fety Instructions 00 eee ee eee ee eee 3 Table of Contents 4 Features ia pa ngacadn wep eae eee 4 Getting Started gt Basic TV and Remote Control Operation 5 Remote Control 6 Basic Antenna Connection 7 Basic Cable TV Connection 7 Cable Box Connection 8 Audio Video Input Connections 9 S Video 10 Component Video Connections 11 Audio Video Outputs 12 Side Audio Video Inputs 13 ry Install Menu Menu Language 14 Tuner Mode oo nee ses sa rs eae 15 Auto Program Setting Up Channels 16 Channel Edit 22 566 o cp eigaceead 17 5 Picture Menu Picture Adjustment Controls 18 Sound Menu Sound Adjustment 19 271 Features Menu Using the Format Expand 4 3 Control 20 Simarthock ois nce aged di id 21 SmartLock Access Code 22 SmartLock Block Channels 23 SmartLock Clear All 24 SmartLock Block All 25 SmartLock Movie Ratings
49. ff CH annel Buttons Press to scan memorized channels VOL ume Buttons Press to increase or decrease the sound MENU Button Press to see the menu Press repeatedly to return to previous menus or remove the menus Arrow lt gt A Y Buttons Press to select or adjust items in the menu MUTE Button Press to eliminate or restore the TV sound MUTE will appear on the TV when the sound is muted SMART SOUND Button Press to choose a sound setting Details are on page 31 SMART PICTURE Button Press to choose a picture setting Details are on page 32 Basic ANTENNA CONNECTION KO antenna receives normal broad Antenna Connection cast channels VHF 2 13 and UHF 14 69 Your connection is easy because there is only one eo 759 antenna plug on the back of your The normal TV and that s where the antenna goes broadcast channels 2 13 VHF and 14 69 If your antenna has a round cable 1 75 ohm on the end then you re ready to connect it to the TV If your antenna has a flat twin 300 to 75 ohm lead wire 300 ohm you first need Adapter to attach the antenna wires to the screws on a 300 to 75 ohm adapter Push the round end of the adapter 2 or antenna onto the 75Q ohm plug on the back of the TV If the round end of the antenna wire is threaded screw it down finger tight Jack Panel Back of TV Back of Round 75Q Coax
50. i Control gt es canes bee ohh eS 24 Explanation of SmartLock 21 Movie Rating Control 26 TV Rating Control eee eee eee eee 27 SmartPicture Control 31 SmartSound 32 Table of Contents s en aa a EEEa rr 4 Tint nae ets ia Oe AET 18 Troubleshooting Tips 34 Treble Boost 19 Tuner Mode Control 15 TV Operation Basic 5 Limited Warranty 40 Welcome Registration Information 2 37 FACTORY SERVICE LOCATIONS A 1 nea ee lt Cleveland NOhio j rancisco Metro Ar Chicago Cojumb s Los Angeles Charlotte Tennessee Atlanta N Georgia lp Indicates In Home Service Only ON Orlando Milwaukee call Chicago Houston E Tampa W Florida Cincinnati and Columbus call Cleveland SGH Myers SW Florida Nashville and Chattanooga call Knoxville Miami SE Florida Washington Baltimore call Philadelphia Charlotte call Atlanta All Florida locations call Tampa Indicates In Home Carry In Service Toll free numbers provided on the next page NOTE If
51. ial Cable from Antenna HELPFUL HINT After using the AutoProgram Control press the CH and buttons to scroll through all the channels stored in the television s memory BAsic CABLE TV CONNECTION Cable TV input into your home may bea Direct Cable Connection 5 ingle 75 ohm cable If so this connection is very simple Follow the steps below to connect your cable signal to your new television Cable signal coming Direct Cable Connections from Cable Company Round 750 ial cabl 1 Connect the open end of the round ee Cable Company supplied cable to the 75Q input on the TV Screw it down finger tight Jack Panel Back of TV BAsic CABLE Box DECODER CONNECTION f your cable signal uses a cable box or decoder follow the easy steps below to com plete the connection Cable Box w RF In Outputs This connection will NOT supply Stereo sound to the TV The sound from the cable box will be mono Connect the open end of the round Cable Company supplied cable to the cable signal IN put plug on the back of the Cable Box Using a separate round coaxial cable connect one end to the OUT put TO TV plug on the back of the Cable Box Connect the other end of the 3 round coaxial cable to the 75Q input on the back of the television Screw it down finger tight NOTE Be sure to set the OUTPUT CHAN Cable Box Connection RF Input Output Only Cable Signal
52. lity This programming may include mild fantasy and comic violence FV TV G General Audience Most parents would find this program suitable for all ages This type of programming contains little or no violence no strong lan guage and little or no sexual dialogue or situations TV PG Parental Guidance Suggested This program contains material that parents may find unsuitable for younger children This type of programming contains one or more of the following some suggestive dialogue D infrequent coarse language L some sexual situations S or moderate violence V TV 14 Parents Strongly Cautioned This program contains some material that many parents would find unsuitable for children under 14 years of age This type of programming contains one or more of the following intensely suggestive dialogue D strong coarse language L intense sexual situations S or intense violence V TV MA Mature Audience Only This program is specifically designed to be viewed by adults and therefore may be unsuitable for children under 17 This type of programming contains one or more of the following crude indecent language L explicit sexual situations S or graphic violence V 27 OTHER SMARTLocK BLOCKING OPTIONS martLock offers the viewer other blocking features as well With these Blocking Options Main the censoring can be turned ON or OFF Y Pi
53. lor Features Picture Install Sharpness Tint More HELPFUL HINT Treble Boost Press the gt or lt q but tons to turn the control On or Off When On the control will enhance the high fre quency sounds Bass Boost Press the gt or lt Q buttons to turn the control On or Off When On the control will enhance the low frequency sounds Balance Press the gt or lt buttons to adjust the level of sound coming from the left and right speakers AVL Auto Volume Leveler Press the gt or lt q buttons to turn the control On or Off When On AVL will level out the sound being heard when sudden changes in volume occur during commercial breaks or channel changes Sound Press the gt or lt buttons to select between Stereo or Mono settings Note If Stereo is not present on a selected show and the TV is placed in the Stereo mode the sound coming from the TV will remain in the Mono mode SMART PICTURE SOUND Main a Picture Treble Boost Sound Bass Boost Features Balance Install AVL Sound Sound Treble Boost Bass Boost Balance 9 AVL 9 Sound AAA Sound Treble Boost v Bass Boost On gt Balance AVL Sound Sound Treble Boost Bass Boost v Balance 4 feo 50 AVL Sound EAS Sound Treble Boost Bass Boost Balance v AVL
54. ng The procedure of adding or deleting channel numbers into the Television s memory circuits In this format the Television remembers only the locally available or desired channel numbers and skips over any unwanted channel numbers Coaxial Cable A single solid antenna wire normally matched with a metal plug F type end connector that screws or push es directly onto a 75 Ohm input found on the Television or VCR Closed Caption Broadcast standard which allows you to read the voice content of television programs on the TV screen Designed to help the hearing impaired this feature uses on screen text boxes to show dialogue and conversations while the TV program is in progress Side Audio Video Inputs Located on the side of the TV these connectors phono type plug are used for the input of audio and video signals Designed for easy use with VCRs or cameras On Screen Displays OSD Refers to the wording or mes sages generated by the television or VCR to help the user with specific feature controls color adjustment programming etc Menu on screen listing of feature controls shown on the Television screen that are made available for user adjustments GLOSSARY OF TERMS Remote Sensor Window window or opening found on the Television control panel through which infrared remote control command signals are received Status Exit Allows the user to quickly confirm what channel number is cur
55. other end of the S 2 VIDEO CABLE to the S VIDEO OUT jack on the back of the VCR Then connect the other ends of the AUDIO red and white CABLES to the AUDIO left and right OUT jacks on the rear of the VCR Turn the VCR and the TV ON Press the CH or CH buttons to set the TV to its SVHS2 channel Go to your lowest channel for example channel 1 then change channels down to find the correct source channel ed video tape in the VCR and press 5 Now your ready to place a prerecord the PLAY button HELPFUL HINT The S VIDEO and VIDEO AV2 are in parallel The S VIDEO input is dominant when in use If separate video signals are connected to the S VIDEO and VIDEO AV2 in puts the signal from the VIDEO AV2 in puts will not be usable Audio and S Video cables are not supplied with the TV but are available from Magnavox or electronics retailers MAGNAVOX 10 Back of TV ANT 750 17 Audio Cable Red and White R VIDEO AUDIO OUT OUT 3 Back of VCR VCR Equipped with S Video Jacks 5 USING THE CVI COMPONENT VIDEO INPUT Jacks Video inputs provide for the high est possible color and picture resolution in the playback of digital signal source material such as with DVD players The color difference signals Pb Pr and the luminance signal Y con nected and received separately whi
56. picture Contrast Press the gt or lt q buttons to turn Contrast ON or OFF When ON this control will optimize the picture con trast for improved picture clarity SMART PICTURE SOUND MAGNAVOX How TO USE THE PICTURE ADJUSTMENT CONTROLS Picture a Y Brightness _ 4 50 9 Color Picture Sharpness Tint Color Temp V Brightness aaa 65 gt v Picture 1t 50 v Sharpness 4 50 gt Color Temp Contrast How USE THE SOUND ADJUSTMENT CONTROLS esides the normal volume level control your TV also has Treble Boost Bass Boost Balance AVL automatic volume leveler and Sound Stereo Mono controls Press the MENU button on the remote to display the on screen menu Press the CURSOR UP A or CURSOR DOWN button until the word SOUND is highlighted button to display the SOUND menu features Press the CURSOR UP A or CURSOR DOWN Y button to scroll the Sound menu features until the con trol you wish to change is highlighted Treble Boost Bass Boost Balance AVL or Sound 3 Press the CURSOR RIGHT p gt Press the CURSOR RIGHT or LEFT lt button to turn the adjust or turn the control On or Off UT TUS EXIT button to remove the menu from the TV s screen 5 When finished press the STA Main v Picture Brightness Sound Co
57. rd prong are provided for your safety When the provided plug does not fit into your out let consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched partic ularly at plugs convenience receptacles and the point where they exit from the apparatus l1 Only use attachments accessories specified by the manufacturer 12 Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 15 This product may contain lead and mercury Disposal of these materials may be regulated due to environmental considerations For disposal or recycling information please contact your local authorities or the Electronic Industries Alliance www eiae org 16 Damage Requiring Service The appliance should be serv iced by qualified service personnel when A The power supply cord or the plug has been damaged or Se SON
58. rently being viewed Status can also be used to clear the Television of on screen displays or information rather than waiting for the displays to time out or automati cally disappear from the screen Surf The action of scanning specific channel in a limited chan nel list Twin Lead Wire The more commonly used name for the two strand 300 Ohm antenna wire used with many indoor and outdoor antenna systems many cases this type of antenna wire requires an additional adapter or balun in order to con nect to the 75 Ohm Input terminals designed into the more recent Televisions and VCRs Tuner Mode Feature control settings made by the TV Designed for first time set up and use Settings for signal con nections antenna or cable TV plus channel program memory are held in the TV s memory even if the set is unplugged and moved to a new location 36 Alternate 33 Antenna TV 7 Audio Video Inputs 9 Audio Video Outputs 12 AutoLock SmartLock 21 28 Auto Program 16 AVL Control uti cs ate Dee eae oa 19 Balance Control 19 Bass Boost 19 Brightness Control
59. s you want to block out or censor Press the NUMBERED or CH or CH buttons to tune the chan nel you wish to block or censor Press the MENU button on the remote to show the on screen menu Press the CURSOR UP A or DOWN Y button until the word FEATURES is highlighted Press the CURSOR RIGHT button to display the FEATURES menu options Press the CURSOR UP A or DOWN Y button until the words SmartLock are highlighted Press the CURSOR RIGHT button ACCESS CODE will appear on the screen Enter the correct access code number XXXX shows on the Access Code display as you press the NUMBERED buttons The SmartLock menu options will be dis played Oo Ul kh WN Press the CURSOR UP A or DOWN Y buttons until the words BLOCK CHANNELS are highlight ed button to turn blocking ON or OFF for that channel When ON is select ed the channel will be blocked Press the CH or buttons to 1 0 select other channels you wish to block Repeat step 9 to block the new channel 9 Press the CURSOR RIGHT Some models refer to SmartLock as AutoLock your TV may show AutoLock instead of SmartLock in the on screen menu These features are the same Main Picture Brightness Sound Color Features Picture Install Sharpness Tint More Main MAGNAVOX NOTE The 0 7 1 l access code shown on this page is the
60. t of reusable materials and minimize the amounts that need to be properly disposed Your product also uses batteries that should not be thrown away when depleted but should be handed in and disposed of as small chemical waste When you replace your existing equipment please find out about the local regulations regarding disposal of your old tele vision batteries and packing materials SmartLock SmartPicture SmartSound and SmartSurf are all registered trademarks of Philips Consumer Electronics North America Copyright 2003 Magnavox All rights reserved Basic TV AND REMOTE CONTROL OPERATION TELEVISION Press the POWER button to turn 1 the TV ON Note You can also press any button on the front of the TV to turn the TV ON Press the VOLUME button to increase the sound level or the VOLUME button to lower the sound level VOLUME Press the CHANNEL UP DOWN Y button to select TV chan nels REMOTE CONTROL Standby Light Indicator hard Remote Sensor Sensor for activating remote control Red light will show when in commands when the remote is used to control the TV Point the remote control toward the Standby Mode Press the the remote sensor window on the TV Power button to return the TV to it s active state when operating the TV with the remote BATTERY INSTA
61. ted Press the CURSOR RIGHT but 2 ton to display the TV Ratings TV Y TV Y7 TV G TV PG TV 14 or TV MA When highlighted the TV Y and TV G can be turned ON which will allow blocking or OFF which will allow viewing of these rated programs The ratings of TV Y7 TV PG TV 14 or TV MA can be customized to block V violence FV fantasy violence S sexu al situations L coarse language or D suggestive dialogue Press the CURSOR UP A or DOWN Y button to highlight the desired rating Press the CURSOR RIGHT but ton on the remote to turn the TV Y or TV G rating ON or OFF Or press the CURSOR RIGHT p button to enter the sub menus for the TV Y7 TV PG TV Gad To view a program blocked by the TV Rating options enter your 4 digit access SmartLock code This will dis able all blocked TV Ratings until the TV is powered off and Block Channel Setup Code Clear All Block All Movie Rating v TV Rating TV Rating yv IVY on again Then the blocking options will be restored Channel 12 Blocked By SmartLock TV Rating Access Code SMART PICTURE SOUND NOTE The 0 7 1 1 access code shown on this page is the default code or a way to reset the code when the current access code is not known o TV Y7 o TV G o TV PG TV 14 TV MA TV Rating y IVY
62. the TV s on screen menu to be shown in either English or Spanish Press the MENU button on the remote to show the on screen menu Press the CURSOR UP A or DOWN buttons to scroll through the on screen menu until the word INSTALL is highlighted Press the CURSOR RIGHT button to display the INSTALL menu features Press CURSOR UP A or DOWN buttons to scroll the Install fea tures until the wrd LANGUAGE is highlighted Press the CURSOR RIGHT button repeatedly to select ENG LISH or ESPA OL Spanish When finished press the STA TUS EXIT button to remove the menu from the TV s screen COU A W Ne HELPFUL HINT The Language control only makes the TV s on screen MENU items appear in English or Spanish text lt does not change the other on screen text features such as Closed Caption CC TV shows Main Brightness Sound Color Features Picture Install Sharpness Tint More SMART PICTURE SOUND MAGNAVOX 14 Main a Picture Language Sound Tuner Mode Features Auto Program v Install gt Channel Edit m Install v Language English gt Tuner Mode Auto Program Channel Edit Instalar v Idioma Espa ol gt Sintonia Auto Programa Editar Canal How TO USE THE TUNER MODE CONTROL Y he TUNER MODE control allows you to change the TV s signal input to either ANTENNA
63. the factory to automatically adjust the TV s Brightness Color Picture Sharpness Tint Color Temperature Personal DNR and Contrast levels Personai Press the SMART PICTURE but 1 ton on the remote control The current SmartPicture setting will appear in the middle of the screen Press the SMART PICTURE but 2 ton repeatedly to select either PER SONAL MOVIES SPORTS WEAK SIGNAL or MULTIMEDIA picture set tings Note The PERSONAL setting is the set ting that you setup using the PICTURE options within the on screen menu This is the only SmartPicture setting that can be changed All other settings are setup at the factory during the time of production MOVIES Preset picture options for watch ing Video Tapes or DVDs SPORTS Preset picture options for watching sporting events WEAK SIGNAL Preset picture options for watching programs where the reception is not at its best MAGNAVOX MULTIMEDIA Preset picture options for use with video gaming Some models refer to SmartPicture as MultiMedia AutoPicture These features are the same 31 SETTING THE SMARTSOUND CONTROL he SmartSound feature allows the listener to select between four different factory set sound options Personal which can be set by the user Theatre for movie viewing Music for musical type programming and Voice when the program is mainly dialogue These setting affect the
64. to display the on screen menu Press the CURSOR UP A or DOWN Y button until the word FEATURES is highlighted Press the CURSOR RIGHT button to display the FEATURES menu options Press the CURSOR UP A or DOWN Y button until the word SmartLock are highlighted Press the CURSOR RIGHT gt button The screen will read ACCESS CODE Using the NUMBERED buttons enter 0 7 1 1 XXXX appears on the Access Code screen as you press the numbered buttons INCORRECT CODE will appear on the screen and you will need to enter 0 7 I again Ou A Y N The screen will ask you to enter a 7 New Code Enter a new 4 digit code using the NUMBERED but tons The screen will then ask you to CONFIRM the code you just entered Enter your new code again will appear when you enter your new code and then display the SmartLock menu options Proceed to the next page to learn more Some models refer to SmartLock as AutoLock your TV may show AutoLock instead of SmartLock in the on screen menu These features are the same SETTING UP A SMARTLOCK Access CODE Main Picture Brightness Sound Color Features Picture Install Sharpness Tint More NOTE The 0 7 1 1 access code shown on this page is the default code or a way to reset the code when the current access code is not known Main
65. tronics retailers The CVI connection will be dominate over the AV1 in Video Input When a Component Video Device is connected as described it is best not to have a video signal connected to the AV1 in Video Input jack Back of TV 7501 VIDEO UMono A Monitor out AV1 in AV2 in S VIDEO Component Video Cables Green Blue Red Audio Cables Red and White Accessory Device Equipped with Component Video Outputs MAGNAVOX 11 e Monitor Audio Video out jacks are great for recording with a VCR or used to connect an external audio system for better sound repro duction For Audio System Connection Connect one end of the R ight 1 and L eft AUDIO Monitor Out jacks on the TV to the R and L audio input jacks on your amplifier or sound system Set the audio system s volume to a normal listening level ON You can now adjust the sound level coming from the audio system with the VOLUME or button on the TV or remote control 2 Turn the TV and audio system HELPFUL HINT with the TV but are available from Magnavox or electronics retailers Audio and video cables are not supplied For Second VCR Connection Recorder NOTE Refer to page 9 for the proper hookup of the first VCR Follow the instruc tions on how to tune to the AV1 channel to view a pre recorded tape The following steps
66. u all that trouble by automatically turning itself off Press the SLEEP button on the remote control and the SLEEP timer display will appear on the screen to pick the amount of time 15 30 45 60 90 120 180 or 240 minutes before the TV will turn itself off 2 Press the SLEEP button repeatedly An on screen count down will appear during the last minute before the TV shuts itself off HELPFUL HINT The on screen menu will time out and dis appear from the screen when you finish or you can press the STATUS EXIT button to clear the menu from the screen During the last minute of a Sleeptimer setting an on screen count down will be displayed Pressing any button during the last minute will 45 Min 60 Min SURF SMART PICTURE SOUND 90 Min MAGNAVOX cancel the Sleeptimer During the last 10 seconds of a Sleeptimer setting an on screen display will read GOOD BYE Good Bye 9Sec r 29 D gt losed Captioning CC allows you to read the voice content of television programs on the TV screen Designed to help the hearing impaired this feature uses on screen text boxes to show dialogue and conversations while the TV program is in progress to display the current Closed Caption setting 1 Press the CC button on the remote Press the CC button repeatedly to 2 choose from the four Closed Caption

Magnavox 27MS3404R Stereo System User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents