LOREX Technology LW1012 Security Camera User Manual
Contents
1. 1 2 x CAMERA BATTERY 1 x RCA VIDEO CABLE ADAPTOR CABLE CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE DVR INCLUDING ALL COMPONENTS SHOWN ABOVE 1 of each provided with the LW1010 System 2 of each provided with the LW1012 System ENG Wireless Receiver Wireless Receiver 1 DC 9V INPUT Connection port for the 9V Power Adaptor provided with this system Connect the Power Adaptor to a power source NOTE It is recommended that the receiver be connected to a surge bar or similar to protect the equipment from damage 2 CAMERA CONNECTION DIP UP SWITCHES Use the DIP Switches 12 42 Down to search for cameras These switches are set to default positions CAMI ON CAMI OFF CAMI ON CAM1 ON based on Model Number Please do CAM2 OFF CAM2 ON CAM2 OFF CAM2 ON not adjust these switches without first consulting technical support 3 AV OUT Connect the provided AV Cable to the Receiver Connect the Audio and Video ends of the cable to a TV VCR or other viewing device Control Buttons 1 AUTO BUTTON When the receiver is set to AUTO Mode it will continuously switch between the cameras that are set to ON see Camera Connection DIP Switches above The dwell time is set to 4 seconds per camera by default however this can be adjusted to 2 30 seconds To adjust the dwell time press and hold both the AUTO and MANUAL buttons at the same time this will produce beeps ind2. Instruction Manual English Version 1 0 MODELS LW1010 amp LW1012 www lorexcctv com LW1010 Model shown above LW1012 Model includes 2 cameras Copyright O 2008 Lorex Technology Inc ENG Thank you for purchasing the LW1010 LW1012 Color Wireless Series Surveillance System Lorex is committed to providing our customers with a high quality reliable security product http www lorexcctv com Wireless Disclaimer This product broadcasts over public airways and its video and audio signals may be intercepted without your consent CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RICK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF THE PLUG TO THE WIDE SLOT AND FULLY INSERT Please visit us on th
3. Try repositioning the camera receiver or both to improve the reception Ensure that the volume on the TV is ON Make sure that the sound is occurring within range of the Camera Microphone If the unit emits a loud screeching noise feedback move the camera or receiver farther apart Appendix 1 Receiver Specifications E Appendix 1 Receiver Specifications 902MHz 928MHz 48dB 10 C 40 C RCA Audio Video Less than 85 Approx 2 5 x 3 4 x 0 5 Appendix 2 Camera Specifications NTSC 360 Horizontal TV Lines 1 60 1 15 000 1 3 CMOS 0 1 LUX Metal Aluminum case suited for indoor or outdoor use 13 It s all on the web f Product Information Specification Sheets LA User Manuals Software Upgrades Quick Start Guides 10 Firmware Upgrades 7 CURRENCY O LOREX lesi NZ Lorex Sytvania Home Sentinel Sentinel CCTV Deals CCTV Focus On CCTV My Account Customer Support Warranty Registration Shopping Cart 0 y PRODUCTS LOREX SUPPORT Accessories Welcome to Lorex Support Cameras CCTV Observation Systems eo Video Monitoring software is mcAM Windows Vista Compatible Mobile CCTV Systems New Windows Vista Compatible software and drivers available for mCAM web cameras Find Solution Network Cameras amp Servers Simplified Home Security Video Doorphone Systems Video Recorders Multiplexers Windows Vista Discontinued m
4. 9V Battery should last for approximately 4 hours without the IR LEDs in use NOTE Wireless cameras require a power source either an electrical outlet or battery power to operate If you plan to permanently mount the camera in a location it is recommended to use the included Camera Power adaptor to prevent interruptions in the image as the battery adaptor is intended as a temporary power solution Power Adaptor Battery Connect the Connect the Power Camera Battery Adaptor Adaptor to the Female cable to the Female Barrel Power E Barrel Power termination termination on the on the camera Connect camera a battery to the cable 11 ENG Troubleshooting Troubleshooting If you have problems with your System there is often a quick and simple solution Please try the following There is no picture from a Camera There is Interference with the Camera Picture There are problems with the Audio Check all connections to the Camera Make sure the adaptor is plugged in Make sure that the Cameras and Receiver are both ON Make sure that the receiver is set to search for the Camera using the DIP Switch settings Make sure that the camera is in range of the Recelver If using the battery adaptor try replacing the 9V Battery Make sure that each camera transmitter is within range and that there are no large obstructions or interference i e older cordless phones on the 900MHz Frequency
5. want to monitor which is free from dust and is not in line of sight to a strong light source or direct sunlight e Avoid installing the cameras where there are thick walls obstructions or interference i e transformers microwave ovens or other electrical equipment between the Cameras and the Receiver e Select a location for the camera that has an ambient temperature between 14 F 113 F 10 C 45 C e Before starting permanent installation have another person hold the camera for you while you verify its performance by observing the image on a monitor Night Vision This camera includes IR LEDs which provide the camera with the ability to view images in low light conditions It is important to use the provided power adaptor not the 9V DC Battery Adaptor when using the camera for prolonged periods in low light conditions as the LEDs will drain the battery more quickly than regular daytime use ENG Camera Installation Installing the Camera 1 Carefully unpack the Camera 2 Decide whether the camera will be permanently wall mounted or sit on a tabletop e f you decide to place the camera on a tabletop or other flat surface the camera can easily be moved to different locations as desired It is strongly recommended that the camera be affixed to the table top surface to prevent damage to the camera in case of tabletop surface movement or improper handling e f you decide to permanently mount the camera to a
6. This video product should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided or the video product manufacturer s instructions have been followed Attachments Do not use attachments unless recommended by the video product manufacturer as they may cause a hazard Water and Moisture Do not place the power cord for this video product in water Caution Maintain electrical safety Power line operated equipment or accessories connected to this unit should bear the UL CUL CSA ETL or CETL Certification Mark for North America or the CE Certification Mark for the European Union on the accessory itself and should not be modified so as to defeat the safety features This will help avoid any potential hazard from electrical shock or fire If in doubt contact qualified service personnel Accessories Do not place this video equipment on an unstable cart stand tripod or table The video equipment may fall causing serious damage to the video product Use this video product only with a cart stand tripod bracket table recommended by the manufacturer or sold with the video product Any mounting of the product should follow the manufacturer s instructions and use a mounting accessory recommended by the manufacturer ENG Important Safeguards Service 13 14 15 16 17 18 Servicing Do not attempt to service this video equi
7. commended by the manufacturer to determine that the video product is in safe operating condition Wall or Ceiling Mounting The cameras provided with this system should be mounted to a wall or ceiling only as instructed in this guide using the provided mounting brackets Heat The product should be situated away from heat sources such as radiators heat registers stoves or other products including amplifiers that produce heat Use 19 20 21 22 Cleaning Unplug the video product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning Product and Cart Combination Video and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the video product and car combination to overturn Object and Liquid Entry Never push objects for any kind into this video product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the video product Lightning For added protection for this video product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the video product due to lightning and power line surges The manufacturers instructions and use a mounting access
8. e web for the most current Manuals Quick Start Guides and Firmware Additional Language Manuals are also available at http www lorexcctv com Important Safeguards In addition to the careful attention devoted to quality standards in the manufacture process of your video product safety is a major factor in the design of every instrument However safety is your responsibility too This sheet lists important information that will help to assure your enjoyment and proper use of the video product and accessory equipment Please read them carefully before operating and using your video product Installation 1 Read and Follow Instructions All the safety and operating instructions should be read before the video product is operated Follow all operating instructions Retain Instructions The safety and operating instructions should be retained for future reference Heed Warnings Comply with all warnings on the video product and in the operating instructions Polarization Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two 2 blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Power Sources This video product should be operated only fro
9. icating one second increments Once the desired dwell time has been set release the buttons 2 MANUAL BUTTON Press the MANUAL button to switch between available cameras The Receiver will switch to a different camera if available and configured each time that the MANUAL button is pressed Wireless Recelver Installation Wireless Receiver Installation 1 Connect the AV Cable to the back of the receiver Connect the other end of the Cable to the Video IN Yellow and Audio IN White ports on the TV VCR or other viewing monitor 2 Plug the Receiver power cable into the 9V POWER input Plug the power cable into a wall outlet or surge protector 3 Place the receiver in a place that will have clear reception to your camera s Try to avoid placing the receiver near other 900MHZ devices such as older cordless phones etc NOTE The 900MHz signal passes easily through interior walls and in most cases only a slight adjustment is needed to the Receiver to improve the reception Do not force the antennas past their locked positions or damage may occur to the Receiver or Camera Camera Installation Before you install the camera carefully plan where and how it will be positioned and where you will route the cable that connects the camera to the power adaptor or battery adaptor Installation Warnings e Aimthe Cameras to best optimize the viewing area Select a location for the camera that provides a Clear view of the area you
10. m the type of power source indicated on the marking label If you are not sure of the type of power supply to your location consult your video dealer or local power company For video products intended to operate from battery power or other sources refer to the operating instructions Overloading Do not overload wall outlets of extension cords as this can result in the risk of fire or electric shock Overloaded outlets extension cords frayed power cords damaged or cracked wire insulation and broken plugs are dangerous They may result in a shock or fire hazard Periodically examine the cord and if its appearance indicates damage or deteriorated insulation have it replaced by your service technician Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and the point where they exit from the video product 2 10 11 Important Safeguards Ventilation Slots and openings in the case are provided for ventilation to ensure reliable operation of the video product and to protect it from overheating These openings must not be blocked or covered The openings should never be blocked by placing the video equipment on a bed sofa rug or other similar surface This video product should never be placed near or over a radiator or heat register
11. odels updates lt Download Windows Vista ompatible software Wired Camera Systems COMPANBLE Looking for Owners Manuals amp Wireless Camera Systems updates Learn More Consumer Installation Guides x Guides Videos For all the information you need to know to before D SUPPORT making a purchase 5 Learn More Port forwarding Learn More s Warranty gt Free Dynamic DNS Service Software Related Products eA gt Mon software Related Products Get free Dynamic DNS Service for your le INSTALLATION Lorex Network Surveillance Products Register low Warranty VISIT www lorexcctv com Lorex Technology Inc
12. ory recommended by the manufacturer General Precautions General Precautions 1 All warnings and instructions of this manual should be followed 2 Remove the plug from the outlet before cleaning Do not use liquid aerosol detergents Use a water dampened cloth for cleaning 3 Do not use this unit in extremely humid or wet places i e Restaurant Kitchen inside a Sauna etc 4 Keep enough space around the unit for ventilation Slots and openings in the storage cabinet should not be blocked 5 During lightning storms or when the unit is not used for a long time disconnect the power supply antenna and cables to protect the unit from electrical surge FCC CLASS B NOTICE This equipment has been certified and found to comply with the limits regulated by FCC Therefore it is designated to provide reasonable protection against interference and will not cause interference with other appliance usage However it is imperative that the user follows this manual guidelines to avoid improper usage which may result in damage to the unit electrical shock and fire hazard injury In order to improve the feature functions and quality of this product the specifications are subject to change without notice from time to time http www lorexcctv com ENG LW1010 LW1012 Features LW1010 LW1012 Features EWT Eliminates Interference From Most Household Devices Fast amp Easy Installation Plug Into any AC Outlet Receiver Connect
13. pment yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel Conditions Requiring Service Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions A When the power supply cord or plug is damaged B If liquid has been spilled or objects have fallen into the video product If the video product has been exposed to rain or water D If the video product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation E If the video product has been dropped the cabinet has been damaged F When the video product exhibits a distinct change in performance This indicates a need for service Replacement Parts When replacement parts are required have the service technician verify that the replacements used have the same safety characteristics as the original parts Use of replacements specified by the video product manufacturer can prevent fire electric shock or other hazards Safety Check Upon completion of any service or repairs to this video product ask the service technician to perform safety checks re
14. s to any TV VCR DVD Recorder Indoor Outdoor Night Vision Camera Built in Microphone for Listening Ability Camera can be Battery Operated Up to 300ft Wireless Transmission Range Night Vision Allows for Low Light Viewing up to 28ft 7 from Camera Receiver Automatically Switches View Between Cameras Desktop or Wall Mountable RCA Audio Video Connector Maximum open space transmission range The actual range is dependent upon building materials and other obstructions in path of wireless signal IR illumination range of 23 ft 7 under ideal conditions Objects at or beyond this range may be partially or completely obscured depending on the camera application LW1010 requires the Optional 2 Camera Table of Contents MmportantSalequaldS iia ae 3 General Precautions ai 5 Bakoa LAW OU Features 6 Table or oil 6 Getting Stared sms 7 ES CONO lella 8 CONTO alata 8 aa a 9 Saa 9 ars tein the Camera is iio 10 Connecting Camera POWER A 11 IMOUDISS MOON Gissi 12 Appendix 1 Receiver Specifications ii 13 Appendix 2 Camera SpecificatioNS iii 13 Getting Started Getting Started The System comes with the following components 1 x WIRELESS RECEIVER 1 2 x WIRELESS CAMERA 1 2 x POWER ADAPTOR FOR 1 x POWER ADAPTOR CAMERA FOR RECEIVER
15. wall make sure to select a location close to a power outlet NOTE Wireless cameras require a power source either an electrical outlet or battery power to operate If you plan to permanently mount the camera in a location it is recommended to use the included Camera Power Table Top Mount adaptor to prevent interruptions in the image as the battery adaptor is The Camera can be intended as a temporary power solution placed on any flat surface Wall Mounting Instructions To mount the camera to a wall 1 Loosen the screw located on the side of the camera base using a slot head screwdriver 2 Pull the camera free from the Stand 3 Mount the stand to the wall e Mark the position of the two screw holes on the wall e Drill holes and insert the drywall plugs as needed e Position the power cable through either slot on the top or bottom of the stand as desired e Firmly attach the stand to the wall using the provided screws 10 4 Replace the camera in the desired mounting position Tighten the side screw to secure the camera to the Stand Adjust the angle of the camera until the desired view is set Connecting Camera Power The Camera can be powered either by using the provided Power Adaptor or using a 9v battery and the Battery Adaptor Cable e POWERADAPTOR Connect the Power Adaptor to the Camera e BATTERY Connect the battery adaptor cable Connect a 9 Volt Battery to the adaptor cable NOTE The new
Download Pdf Manuals
Related Search