Home

Kenwood KDC-MP445U Car Stereo System User Manual

Contents

1. Source Registerable items TUNER SIRIUS XM HD Frequency or channel iPod Browse item such as Playlists Artists Albums Function setting Function setting item Audio control Audio control item Hands free phone Telephone number retrieval When selecting registerable items the FAV indicator is lit for 3 seconds Go through step 2 and later by the item which the TFAV indicator is lit When a setting operation of each item can be done in the Function setting the FAV indicator goes out and you cannot register to the Favorite 2 Enter Favorite Preset Memory mode Press the FAVORITE button for at least 1 second 3 Select the number to put in the memory Turn the Control knob 4 Put the Favorite Preset in the memory Press the ENTER button Cancelling the Favorite Preset Memory mode Press the 45 button e Register 6 pairs of Favorite Preset Memory Register your favorite functions is displayed for numbers available for preset The memory cannot be erased by the Reset button Registering the operation procedure to an existing preset number overwrites the existing procedure The registered item can be deleted by selecting Favorite Delete of lt Function setting gt page 16 f the items in the second or lower hierarchy are changed he list in iPod will be changed by adding or deleting songs after the FAVORITE registration Due to this the list registered
2. 4 Search for the name Press the ENTER button 5 Select the phone number Turn the Control knob 28 KDC x494 KDC MP445U KMR 440U Pushing the Control knob towards right or left sorts the Phone Book by name 6 Make a call Press the ENTER button e Pressing S MODE button each time switches between name and telephone number e During search a non accent character such as u is searched for instead of an accent character such as Dialing a number 1 Enter Bluetooth mode Press the FNC button for at least 1 second BT MODE is displayed 2 Select the Number dial mode Turn the Control knob to select Number Dial and then press the ENTER button 3 Enter a phone number Turn the Control knob to select number and then Push the Control knob towards right 4 Make a call Press the ENTER button To erase the entered phone number digit by digit Push the Control knob towards left e You can input a maximum of 32 digits Calling a number in the call log 1 Enter Bluetooth mode Press the FNC button for at least 1 second BT MODE is displayed 2 Select the call log mode Turn the Control knob to select Incoming Calls Outgoing Calls or Missed Calls and then press the ENTER button Incoming Calls Incoming calls Outgoing Calls Outgoing calls Missed Calls Missed calls 3 Select a name or phone number Turn the Control knob 4 Make a ca
3. OSEC 8SEC 99SEC This function automatically answers responds to a call after lapse of the preset time interval for automatic answer OFF Does not answer the phone call automatically 0 Automatically answers the phone call at once Is 99s Automatically answers the phone call after lapse of 1 99 seconds English 19 Function setting Speaker Select Bluetooth HF Audio gt Eront All You can specify output speakers for hands free voice communication and Bluetooth audio sound Front Outputs sound from the front speakers All Outputs sound from the front and rear speakers Setting the Beep of the Incoming Call Call Beep gt ON OFF You can output a beep from the speaker when a call comes in ON Beep is heard OFF Beep is canceled BT F W Update BT F W Update Displays the firmware version and update the firmware Refer to lt Displaying the Firmware Version gt page 34 e The Bluetooth Function setting items can be set while in the Bluetooth mode without selecting the Function setting mode 1 Press the FNC button for at least 1 second to enter the Bluetooth mode 2 Turn the Control knob to select BT Setting and then press the ENTER button 3 Turn the Control knob to select desired item and then press the ENTER button 4 Turn the Control knob to select value and then press t
4. TUNER Press the SRC button for at least 1 second to turn the power OFF e You can select the source selection mode to switch between sources each time you press the SRC button Set I Source Select Mode of lt Function setting gt page 16 to 2 The source iPod and CD can be selected when each source is ready to play e When an optional accessory is connected the source name for each device appears e The power will be turned off automatically after about 20 minutes have lapsed in standby mode KMR 440U only Volume Turn the Control knob to adjust the sound volume Display scroll Keep the S MODE button pressed down to scroll through the CD or audio file text display Auxiliary input Portable audio device can be connected with the stereo mini plug 3 5 mm Playing Music CD USB iPod Playing Disc Insert the disc in the Disc slot When inserted the source is switched automatically and a song starts playing Playing USB device Connect a USB device or iPod to the USB terminal When connected the source is switched automatically and a song starts playing Selecting an Audio file folder Push the Control knob towards up or down to select a folder Selecting a Song Push the Control knob towards right or left to select a song track or file Fast Forwards or Fast Backwards the music Push and hold the Control knob towards right or left to fast forward or fast backward the audio fil
5. and Hands free talk each time this button is pressed Depending on the type of your cell phone switching to the private talk mode may select the source that was used before commencing the hands free connection If this happens the source cannot be switched back to the hands free talk mode by operating this unit Operate your cell phone to return to the hands free talk mode Adjusting the Voice Volume during a Call Turn the Control knob Call waiting Answering Another Incoming Call with the Current Call Suspended 1 Press the ENTER button 2 Turn the Control knob to select Answer and then press the ENTER button Answering another Incoming Call after Terminating the Current Call Press the SRC button Continuing the Current Call 1 Press the ENTER button 2 Turn the Control knob to select Reject and then press the ENTER button Answering the Waiting Call after Terminating the Current Call Press the SRC button Switching between the Current Call and Waiting Call Press the ENTER button Each pressing of this knob switches the calling party English 29 Function of KCA BT200 Optional Accessory Operation of hands free phoning Clearing the Disconnection Message Press the FNC button for at least 1 second HF Disconnect disappears Making a voice dialing call 1 Enter Bluetooth mode Press the FNC button for at least 1 second BT MODE is displayed 2 Enter voi
6. 45 button for at least 1 second English 15 Function setting Configure the functions of this unit using the following procedure 1 Search for the item to set Pick up the item to set according to lt Function item gt page 16 2 Select the source Press the SRC button Switch to the source that displays the item to set according to lt Function list gt page 21 For how to select source item refer to lt Power and source selection gt page 4 3 Enter Function setting mode Press the FNC button 4 Select the Function item Turn the Control knob to select the item to set 5 Enter the selected Function item Press the ENTER button Press the 4 button to return to the previous item Repeat steps 4 and 5 until you get to the item to set 6 Set the Function item Turn the Control knob to select a desired setting value 7 Determine the setting value Press the ENTER button The previous item is displayed 8 Exit Function setting mode Press the 45 button for at least 1 second 16 KDC X494 KDC MP445U KMR 440U Function item Example M Function name Display of each function on this unit gt Setting value 1 Setting value 2 Provides a functional overview of the function item The source that displays this function can be found according to the numbers M in lt Function list gt page 21 e The underscored setting value is a factory setting Music Play Mode iPo
7. Downloading from the cell phone manually 1 Operate the cell phone to end the hands free connection 2 Operate the cell phone to send the phone book data to this unit By operating the cell phone download the phone book data to this unit During downloading Downloading is displayed After completion of downloading Completed is displayed 3 Operate the cell phone to start the hand sfree connection Clearing the downloading completion message Press any button Up to 1000 phone numbers can be registered for each registered cell phone Up to 32 digits can be registered for each phone number along with up to 50 characters representing a name 50 Number of alphabetic alphabetical characters Fewer characters can be input depending on the type of characters To cancel downloading of the phone book data operate the cell phone English 33 Function of KCA BT200 Optional Accessory Bluetooth Setup Selecting the Bluetooth device You Wish to Connect When two or more Bluetooth devices have already been registered you need to select the Bluetooth device you wish to use 1 Enter Bluetooth mode Press the FNC button for at least 1 second BT MODE is displayed 2 Enter Function setting mode Press the FNC button 3 Select Bluetooth device selection mode The item can be selected and determined as follows Settings gt Phone Selection to select the cellphone or Audio Selec
8. Memory Full The number of voice tags reaches the maximum number to be registered in the phonebook Favorite No Memory The procedure is not registered to Favorite Preset Memory No Access The procedure preset with Favorite Control cannot be available The preset content may not be recalled depending on the selected source or mode No Voice o call Memory Full The tag memory of HD Radio is FULL iPod Full The iPod memory is FULL No TAG Function iPod which does not support the tag memory is connected N A Channels No receivable channel and category Specifications FM tuner section Frequency range 200 kHz step 87 9 MHz 107 9 MHz Usable sensitivity S N 30dB 9 30 Bf 0 8 uV 75 O Quieting Sensitivity S N 50dB 15 20 Bf 1 6 uV 75 Q Frequency response 3 dB 30 Hz 15 kHz Signal to Noise ratio MONO 70 dB Selectivity 400 kHz gt 80 dB Stereo separation 1 kHz 40 dB AM tuner section Frequency range 10 kHz step 530 kHz 1700 kHz Usable sensitivity S N 20dB 28 dBu 25 uV CD player section Laser diode GaAlAs Digital filter D A 8 Times Over Sampling D A Converter 24 Bit Spindle speed Audio files 500 200 rpm CLV Wow amp Flutter Below Measurable Limit Frequency response 1 dB 10 Hz 20 kHz Total harmonic distortion 1 kHz KDC X494 0 008 KDC MP445U KMR 440U 0 010 Signal to Noise ratio 1 kHz K
9. Acquiring Signal appears English 27 Function of KCA BT200 Optional Accessory Operation of hands free phoning Before Use For details on the Bluetooth cell phone with the hands free function see lt About the Cell Phone gt page 40 You need to register your cell phone before using it with this unit For more details see lt Registering Bluetooth device gt page 32 If you have registered two or more cell phones you need to select one of them For more details see lt Selecting the Bluetooth device You Wish to Connect gt page 34 To use the Phone Book it must be downloaded to this unit in advance For details see lt Downloading the Phone Book gt page 33 Receiving a call Answering a Phone Call Press the ENTER button e The following operations disconnect the line Insering a CD Connecting a USB device e The name of the calling party is displayed if it has already been registered in the Phone Book Rejecting an Incoming Call Press the SRC button Calling a number in the Phone Book 1 Enter Bluetooth mode Press the FNC button for at least 1 second BT MODE is displayed 2 Select the Name search mode Turn the Control knob to select Name Search and then press the ENTER button 3 Enter the initial of name Operation type Operation Select the characters Turn the Control knob Move the character page Push the Control knob towards up or down
10. Standby only Clock Date Date Displays the status Type A display only Indicator Blank Blank In SIRIUS Optional accessory source Information Display Channel Name Channel Name Artist Name Composer name amp Music Title Artist Song Category Name Category Name Channel Number Channel Number S pectrum analyzer amp Clock Speana Clock Date Date Displays the status Type A display only Indicator Blank Blank In XM Optional accessory source Information Display Channel Name CHANNEL NAME ame amp Title NAME TITLE Category Name CATEGORY NAME Channel Number CHANNEL NUMBER Spectrum analyzer amp Clock Speana Clock Date Date Displays the status Type A display only Indicator Blank Blank In Bluetooth Audio BT AUDIO EXT Optional accessory source 1 Enter Function setting mode Press the FNC button 2 Select Display control mode Turn the Control knob to select Display Control and then press the ENTER button 3 Select the Display type Turn the Control knob to select Display type A or B and then press the ENTER button 4 Select Text display selection mode Turn the Control knob to select DISP Text Select and then press the ENTER button 5 Select the text display part Display type A only Push the
11. 32 You need to select the Bluetooth audio player you wish to connect Refer to lt Selecting the Bluetooth device You Wish to Connect gt page 34 Basic Operation Selecting Bluetooth Audio source Press the SRC button Select the BT AUDIO EXT display For how to select source item refer to lt Power and source selection gt page 4 Pause and play Press the 45 button Music Search Push the Control knob towards right or left All or some of the operations above cannot be performed if the Bluetooth audio player is not ready for remote control Switching between Bluetooth audio sources does not start or stop playback automatically Perform the operation for starting or stopping playback Some audio players cannot be controlled remotely or reconnected after Bluetooth disconnection Operate the main unit of the audio player to connect Bluetooth When 2Zone is set to ON and 2Zone F R Select is set to Front of lt Audio Control gt page 7 Bluetooth Audio source cannot be selected English 31 Function of KCA BT200 Optional Accessory Bluetooth Setup Registering Bluetooth device To make your Bluetooth device cell phone usable with this unit you need to register it pairing You can register up to five Bluetooth devices to this unit When registering from Bluetooth devices 1 Turn on the this unit 2 Start registering a unit by operating the Bluetooth device By operating the
12. Bluetooth device register the hands free unit pairing Select KCA BT200 from the list of connected units 3 Enter a PIN code Input the PIN code registered as mentioned in lt Registering PIN Code gt page 33 Check that registration is complete on the Bluetooth device 4 By operating the Bluetooth device start hands free connection When registering from this unit 1 Enter Bluetooth mode Press the FNC button for at least 1 second BT MODE is displayed 2 Enter Function setting mode Press the FNC button 3 Select Bluetooth device registration mode The item can be selected and determined as follows Settings gt Detailed Settings gt Device Regist To select the item turn the Control knob To determine the item press the ENTER button Search for the Bluetooth device When search is completed Finished is displayed 4 Select the Bluetooth device Turn the Control knob to select desired Bluetooth device and then press the ENTER button 5 Input the PIN code Operation type Operation Select the numbers Turn the Control knob Move to the next digit Push the Control knob towards right Delete the last digit Push the Control knob towards left 6 Transmit the PIN code Press the ENTER button 32 KDC X494 KDC MP445U KMR 440U If Pairing Success is displayed registration is complete 7 Return to the device list Press the ENTER button 8
13. DVC Status You can display the connection status signal strength and battery level Battery level of cell phone Yul Signal strength of cell phone Function of KCA BT200 Optional Accessory E Illumination Dimmer ILLUMI Dimmer gt Auto Manual1 Manual2 OFF Reduces the key Illumination brightness Auto Dims the illumination in conjunction with the Light switch of the vehicle anuall Dims the illumination constantly anual2 Dims the illumination darker than Manuall OFF Does not dim the illumination Illumination Effect ILLUMI Effect gt ON ORF Sets whether the key illumination color is changed in conjunction with the key operation Al Music linked Illumination Effect ILLUMI Music SYNC gt ON OFF Sets whether the key illumination color is changed in conjunction with the sound volume Tuner Settings A Seek Mode Seek Mode gt Auto1 Auto2 Manual Selects the tuning mode of the radio Tuning mode Display Operation Auto seek Autol Automatic search for a station Preset station seek Auto2 Search in order of the stations in the Preset memory Manual Manual Normal manual tuning control Auto Memory Auto Memory Memarizes six stations with good reception automatically Turn the Control knob to select YES and then press the ENTER button to start the auto memory operation Monaural rece
14. Exit Bluetooth mode Press the SRC button This unit allows up to eight digits to be input for a PIN code If a PIN code cannot be input from this unit it can be input from the Bluetooth device If there are 5 or more Bluetooth devices registered you cannot register a new Bluetooth device If the error message appears even though the PIN code is correct try lt Registering Special Bluetooth device gt page 32 Registering Special Bluetooth device Allow registration of a special device that cannot be registered normally pairing 1 Enter Bluetooth mode Press the FNC button for at least 1 second BT MODE is displayed 2 Enter Function setting mode Press the FNC button 3 Select Special device registration mode The item can be selected and determined as follows Settings gt Detailed Settings gt SPCL DVC Select To select the item turn the Control knob To determine the item press the ENTER button 4 Select a device name Turn the Control knob to select desired device name and then press the ENTER button If Completed is displayed registration is completed 5 Go through the procedure of lt Registering Bluetooth device gt page 32 and complete the registration pairing Cancelling Bluetooth mode Press the FNC button If the device name is not in the list select Other Phones Registering PIN Code By operating the Bluetooth device specify the PIN code nece
15. Search mode Press the Q button MUSICSEARCH is displayed 2 Search for music Audio file Operation type Operation Movement between urn the Control knob folders files Selection of folder flie Press the ENTER Return to previous folder Press the lt button Return to root folder Push the Control knob towards left for at east 1 second Press the lt button for at least 1 second Cancel the Music Search mode 2 gt indicator Audio file QE indicator Folder with a folder or file in the lower layer C7 indicator Folder without a folder or file in the lower layer CD source Operation type Operation Movement between track Turn the Control knob Selection of track Press the ENTER Return to first track Push the Control knob towards left for at east 1 second Press the lt button Cancel the Music Search mode Function of iPod source Music Search for iPod Searching for the song in iPod you want to play 1 Enter Music Search mode Press the Q button MUSICSEARCH is displayed 2 Search for music Operation type Operation Movement between items Turn the Control knob Selection of item Press the ENTER Return to previous item Press the lt 4 button Return to Top menu Push the Control knob towards up for at least 1 second Cancelling the Music Search mode Press the 45 button for at least 1 second e If no
16. Side Select gt 2 types Sets the Type A B D and E side display to ON OFF Refer to lt Selecting Display Type gt page 22 WM Display Text Selection DISP Text Select Sets the Type A and B text display Refer to lt Selecting Text Display gt page 22 fi Display Graphic Selection DISP GRPHC Select gt 6 types Sets the Type E spectrum analyzer display Refer to lt Selecting Display Type gt page 22 Clock amp Date Settings A Adjusting the Clock Clock Adjust Sets the clock Refer to lt Adjusting the Clock amp Date gt page 4 i Adjusting the Clock Date Adjust Sets the date Refer to lt Adjusting the Clock amp Date gt page 4 M Selecting Date Mode Date Mode gt 7 types Sets the date display mode Refer to lt Adjusting the Clock amp Date gt page 4 Display amp Illumination Settings H Display ON OFF DISP OFF Mode gt ON If this unit is not operated at least 5 seconds with ON selected the display turns off During a setup mode the display will not turn off even if 5 seconds lapse Function of KDGX494 KDGMP445U fi Display Dimmer Display Dimmer gt Auto Manual1 Manual2 OFF Dims the display part in conjunction with the light switch of the vehicle Text Scroll Text Scroll gt Auto Manual Setting to Auto scrolls the displayed text automatically Display Bluetooth device Status BT
17. Station selection lt 4 gt gt 1 e Recall preset stations 1 6 In CD Audio file source e Music selection lt lt gt gt 1 e Folder selection FM AM e Pause Play ENT e Enter Music search mode A Movement between folders files during Music search mode A V e Return to previous folder 4 In iPod source e Enter Music search mode A V e Movement between items during Music search mode A V e Return to previous item 45 38 KDC x494 KDC MP445U KMR 440U In Satellite Radio tuner source Band selection FM Channel selection lt lt gt b1 e Recall preset channels 1 6 Hands free phone control Making a call Enter Bluetooth mode e Select a dialing method A V gt ENT Number dial input Input a digit 0 9 Input gt Input FM Input AM Clear the entered phone number ka a Make a call DIRECT Receiving a call Answer the call X Call waiting e Answer Another Incoming Call with the Current Call Suspended X During a call End the call SRC Preparing the remote control unit AES Pull the battery sheet out from the Ss remote control unit to the direction of the arrow 4 Changing the battery of the remote control unit Keep on slide lt lt Use a commercially available _7 button battery CR2025 Insert the battery with the 7 and poles aligned pro
18. characters included in a song name can be displayed the browse item name and digits are displayed Items Display Items Display Playlists PLIST Podcasts PDCT Artists ART Genres GEN Albums ALBY Composers COM Songs PRGM English 9 Music disc Audio file Operation Function of iPod source Alphabet Search You can select an alphabetic character from the list in the browse item artist album etc currently selected 1 Enter Music Search mode Press the Q button MUSICSEARCH is displayed 2 Select browse item Turn the Control knob to select browse item and then press the ENTER button 3 Enter Search select mode Press the S MODE button 4 Select Alphabet Search mode Turn the Control knob to select Alphabet Search and then press the ENTER button 5 Select the character to be searched for Operation type Operation Select the characters Turn the Control knob Move the cursor to the enter Push the Control knob towards up or character position down 6 Determine the selected character Press the ENTER button Start search When search is completed the music search mode is selected again at the selected character position Cancelling the Music Search mode Press the 45 button for at least 1 second e The time of Alphabet search may become long depending on the number of items songs in iPod To search for a c
19. in the memory Push the Control knob towards right or left 2 Enter Preset Memory mode Press the Q button 3 Preset the station Turn the Control knob to select preset number P1 P6 and then press the ENTER button for at least 2 seconds Cancelling the Preset Memory mode Press the 45 button Preset Tuning Recalling the stations in the memory 1 Enter Preset Tuning mode Press the Q button 2 Recall the station Turn the Control knob to select recall number P1 P6 and then press the ENTER Cancelling Preset Tuning Press the 45 button 14 KDC X494 KDC MP445U KMR 440U Function of remote control Direct Access Tuning Entering the frequency and tuning 1 Enter Direct Access Tuning mode Press the DIRECT button on the remote control js displayed 2 Enter the frequency Press the number buttons on the remote control Example Desired frequency Press button 92 1 MHz FM 9 2 1 810 kHz AM 8 1 0 3 Search the frequency Press the lt lt or gt gt button on the remote control Cancelling Direct Music Search Press the 45 button on the remote control Favorite Control Favorite Preset Memory You can register frequently used items such as broadcast stations iPod Playlist or Artists Function setting items or Audio control items 1 Display the item you want to register Registerable items are as follows
20. is stored TAG Transferred is indicated on the display after a tag is stored to your iPod Turn ON the iTunes Tagging of lt Function setting gt page 16 when using this function Up to 50 TAGs song s information can be registered to this unit When iPod is connected the TAG information registered to this unit is transferred to the connected iPod The memory usage can be checked by selecting J Memory count display of lt Function setting gt page 16 Function of remote control Direct Access Tuning Entering the frequency and tuning 1 Enter Direct Access Tuning mode Press the DIRECT button on the remote control is displayed 2 Select Tuning item Press the DIRECT button on the remote control Pressing the DIRECT button each time switches the following tuning items as follows Tuning item Display Frequency Saat Channel H HD Cancelling Direct Access Tuning 3 Enter the frequency or Channel Press the number buttons on the remote control Example of frequency input Desired frequency Press button 92 1 MHz FM 9 2 0 810 kHz AM 8 1 0 4 Do Direct Access Tuning Press the kaa or gt gt button on the remote control Cancelling Direct Access Tuning Press the 45 button on the remote control English 25 Satellite Radio tuner Optional Accessory control Basic Operation Selecting Satell
21. online manual as well In this manual the word USB device is used for flash memories and digital audio players which have USB terminals About USB device When the USB device is connected to this unit it can be charged up provided that this unit is powered Install the USB device in the place where it will not prevent you from driving your vehicle properly You cannot connect a USB device via a USB hub and Multi Card Reader Save backups of the audio files used with this unit The files can be erased depending on the operating conditions of the USB device We shall have no compensation for any damage arising out of erasure of the stored data No USB device comes with this unit You need to purchase a commercially available USB device When connecting the USB device usage of the CA U1EX option is recommended Normal playback is not guaranteed when a cable other than the USB compatible cable is used Connecting a cable whose total length is longer than 5 m can result in abnormal playback iPod iPhone that can be connected to this unit Made for iPod nano 1st generation iPod nano 2nd generation iPod nano 3rd generation iPod nano 4th generation iPod nano 5th generation iPod with video iPod classic iPod touch 1st generation iPod touch 2nd generation Works with iPhone iPhone 3G iPhone 3GS 4GB 8GB 16GB 8GB 16GB 16GB 32GB Update i
22. register it delete an unnecessary song Do not register Podcasts Songs may be registered or played improperly For example unintended songs are registered Playing the playlist 1 Display the playlist Press the ENTER button My Playlist is displayed 2 Play a song in the playlist Turn the Control knob to select the song you want to play and then press the ENTER button LIST indicator is displayed e To stop playing the song in the playlist turn the power off Ifa song does not end with 1 second or longer silence its last portion may not be played Songs cannot be played at random during playback of the songs in playlist Deleting a song from the playlist 1 Display the playlist Press the ENTER button My Playlist is displayed 2 Turn the Control knob to select the song you want to delete and then press the ENTER button for at least 2 seconds 12 KDC X494 KDC MP445U KMR 440U 3 Turn the Control knob to select One or All and then press the ENTER button Selecting All deletes all songs 4 Turn the Control knob to select YES and then press the ENTER button Completed is displayed All songs in the playlist can also be deleted by selecting M My Playlist Delete of lt Function setting gt page 16 Function of remote control Direct Music Search Searching the music by entering the track number 1 Enter Direct Music Search mode Press the DIR
23. 2 Profile A2DP Advanced Audio Distribution Profile AVRCP Audio Video Remote Control Profile A2DP is a profile designed to transfer the music from an audio player AVRCP is a profile designed to control playback and selection of music by an audio player Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit 1 Cannot set up the subwoofer Cannot set up the low pass filter No output from the subwoofer gt SubWoofer of lt Audio Control gt page 7 is not set to On a Cannot set up the subwoofer Phase gt LPF SubWoofer ADJ of lt Audio Control gt page 7 is set to Through What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring Before calling service first check the following table for possible problems General The Key beep does not sound W The preout jack is being used ts The Key beep cannot be output from the preout jack Tuner source H Radio reception is poor YW The car antenna is not extended ts Pull the antenna out all the way Disc source H The specified disc does not play but another one plays instead WV The specified CD is quite dirty ts Clean the CD referring to the CD cleaning of the WY The disc is severely scratched ts Try another disc instead Audio file source The sound skips when an Audio file is being played WY The media is scrat
24. 3 Select Direct Search mode Turn the Control knob to select Direct Search and then press the ENTER button 4 Select browse item Turn the Control knob to select browse item and then press the ENTER button Display Browses item Playlists a Artists amp Albums D Songs Podcasts 4 Genres Bed Composers 5 Select the character to be searched for Turn the Control knob to select character and then press the ENTER button You can select up to three characters 6 Search for music Turn the Control knob to select DONE and then press the ENTER button A search result list is displayed 7 Select the music Turn the Control knob to select music and then press the ENTER button Cancelling the Music Search mode Press the 45 button for at least 1 second Function of iPod source Related Search Browsing for music of the same artist or genre as the one being played 1 Enter Related Search mode Press the S MODE button 2 Select browsing item Turn the Control knob and press the ENTER button when the desired browse item is selected Display Browses music Search Artist Displays the album of the same artist Search Album Displays music in the album in which the one being played is included Search Genre Displays the artist of the same genre Search Composer Displays the album including music created by the same composer 3 S
25. 4 Audio Selection Audio Selection Select the Bluetooth audio player to be connected Refer to lt Selecting the Bluetooth device You Wish to Connect gt page 34 SMS Download SMS Download Download a short message Refer to lt Downloading the SMS gt page 37 SMS Inbox display SMS Inbox Display the received short message Refer to lt Displaying the SMS gt page 37 Adding a voice command PB Name Edit Registers voice for voice recognition Refer to lt Adding a voice dialing command gt page 35 Voice command category setting PN Type Edit Registers voice to select the Phone number category in Phonebook Refer to lt Setting a Voice Command for Category gt page 36 Device Regist Device Regist Register a Bluetooth device pairing Refer to lt Registering Bluetooth device gt page 32 Special Device Regist SPCL DVC Select Allow registration of a special device that cannot be registered normally Refer to lt Registering Special Bluetooth device gt page 32 Device Delete Device Delete Cancel registration of the Bluetooth device Refer to lt Deleting a Registered Bluetooth device gt page 34 PIN Code Edit PIN Code Edit Specify the PIN code required when registering this unit using the Bluetooth device Refer to lt Registering PIN Code gt page 33 Setting the Time Interval for Automatic Answer Auto Answer gt OFF
26. Control knob towards up or down The selected text display part blinks 6 Select the text Turn the Control knob 7 Exit Function setting mode Press the 45 button for at least 1 second If the selected display item does not have any information alternative information is displayed Some items cannot be selected depending on the display type and row When selecting Folder name while playing with iPod names will be displayed depending on currently selected browsing items If the iPod Control by Hand Mode is set to on while playing the iPod iPod By Hand Mode is displayed If all characters cannot be displayed while playing with iPod Information Display the file number in the list is displayed Source name Source Name Information Display Spectrum analyzer amp Clock Speana Clock Music title TIMERS Date Date Folder name FLD Displays the status Type A display only Indicator File name PLESS Blank Blank English 23 Function of KTC HR300 KTC HR200 Optional Accessory HD Radio tuner control Tuning Selecting the station 1 Select HD Radio source Press the SRC button Select the HD RADIO display For how to select source item refer to lt Power and source selection gt page 4 2 Select the HD FM band Push the Control knob towards up Switches between the FM1 FM2 and FM3 bands each time you push towards up Se
27. DC X494 110 dB KDC MP445U KMR 440U 105 dB Dynamic range MP3 decode Compliant with MPEG 1 2 Audio Layer 3 WMA decode Compliant with Windows Media Audio USB Interface USB Standard USB1 1 2 0 Full speed File System FAT16 32 Maximum Supply current 500 mA MP3 decode Compliant with MPEG 1 2 Audio Layer 3 WMA decode Compliant with Windows Media Audio Audio section Maximum output power 50Wx4 Full Bandwidth Power at less than 1 THD 22Wx4 Speaker Impedance 24 80 Tone action Bass 100 Hz 8 dB Middle 1 kHz 8 dB Treble 12 5 kHz 8 dB Preout level Load CD KDC X494 4000 mV 10 kQ KDC MP445U KMR 440U 2500 mV 10 kQ Preout impedance gt lt 600 0 Auxiliary input Frequency response 1 dB 20 Hz 20 kHz Input Maximum Voltage 1200 mV Input Impedance 210 kQ General Operating voltage 11 16V allowable 144V Maximum Current consumption 10A Installation Size W x H x D 182x53 x 155 mm 7 3 16 x 2 1 16 x 6 1 8 inch Weight 2 9 Ibs 1 3 kg Specifications subject to change without notice English 43 ACAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure In compliance with Federal Regulations following are reproductions of labels on or inside the product relating to laser product safety Kenwood Corporation 2967 3 ISHIKAWA MACHI HACHIOJI S
28. ECT button on the remote control is displayed 2 Enter the music number Press the number buttons on the remote control 3 Search the music Press the ka or gt gt button on the remote control Cancelling Direct Music Search Press the 45 button on the remote control e Direct Music Search cannot be performed during playing of iPod Function of disc changers Basic Operation of Disc Changer Optional Selecting CD changer source Press the SRC button Select the CD CH display For how to select source item refer to lt Power and source selection gt page 4 Music search Push the Control knob towards right or left Disc Search Push the Control knob towards up or down Function of disc changers with remote control Direct Search in Disc Changer Optional Searching the disc or music by entering the disc or music number 1 Enter Direct Search mode Press the DIRECT button on the remote control is displayed 2 Enter the disc or music number Press the number buttons on the remote control 3 Search the disc Press the FM or AM button on the remote control Search the music Press the kaa or gt gt button on the remote control Cancelling Direct Search Press the 45 button on the remote control e Input O to select disc 10 English 13 Tuner Operation Station Preset Memory Putting a station in the memory 1 Select the frequency to put
29. Enter Bluetooth mode Press the FNC button for at least 1 second BT MODE is displayed 2 Enter Function setting mode Press the FNC button 3 Select SMS download mode The item can be selected and determined as follows Settings gt SMS Download To select the item turn the Control knob To determine the item press the ENTER button 4 Start downloading Press the ENTER button SMS Downloading is displayed When the downloading finishes Completed is displayed 5 Exit Bluetooth mode Press the SRC button The cell phone must be able to transmit the SMS using Bluetooth Setting on the cell phone may be required If the cell phone does not support SMS function the SMS download item in Function Control mode is not displayed When the SMS is downloaded from the cell phone the unopened messages in the cell phone are opened e The up to 75 already read and unread short messages respectively can be downloaded English 37 Function of KDC X494 KDC MP445U Basic Operations of remote control L DIRECT General control Volume control VOL e Source selection SRC Volume reduction ATT When the button is pressed again the volume returns to the previous level e Return to previous item 4 Exit from mode EXIT e Selection of item A V e Determination ENT Enter Audio Control mode AUD In Tuner HD Radio source Band selection FM AM e
30. For how to select source item refer to lt Power and source selection gt page 4 2 Enter Audio Control mode Press the AUDIO button 3 Select the Audio item to adjust Turn the Control knob to select the audio item for adjustment and then press the ENTER button Press the 4 button to return to the previous item 4 Adjust the Audio item Turn the Control knob 5 Determine the setting value Press the ENTER button The previous item is displayed 6 Exit Audio Control mode Press the 45 button for at least 1 second English 7 Audio Adjustments Audio Preset Memory Registering the value setup by Audio Control 1 Setup Audio Control Setup the lt Audio Control gt page 7 2 Enter Audio Control mode Press the AUDIO button 3 Select Audio preset memory mode The item can be selected and determined as follows Detailed Settings gt Audio Preset To select the item turn the Control knob To determine the item press the ENTER button 4 Select the Audio Preset Memory Turn the Control knob to select Memory and then press the ENTER button 5 Turn the Control knob to select YES and then press the ENTER button Memory Completed is displayed 6 Exit Audio Control mode Press the 45 button for at least 1 second To use this function this unit must be powered for more than one hour Register 1 pair of Audio Preset Memory You cannot register by the source When
31. HI TOKYO JAPAN KENWOOD CORP CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS NO 21 CFR 1040 10 CHAPTER 1 SUBCHAPTER J Location Top plate FCC WARNING This equipment may generate or use radio frequency energy Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual The user could lose the authority to operate this equipment if an unauthorized change or modification is made FCC NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment may cause harmful interference to radio communications if it is not installed and used in accordance with the instructions However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consul
32. KENWOOD CD RECEIVER KDC X494 KDC MP445U KMR 440U INSTRUCTION MANUAL Kenwood Corporation The latest version of the Instruction Manual can be downloaded from www kenwood com cs ce Before reading this manual please access this site to check whether your manual is the latest one GAD H Radior READY READY Ay Designed for Made for 0 Works with iPhone Wind i d My nien iPo Take the time to read through this instruction manual Familiarity with installation and operation procedures will help you obtain the best performance from your new CD receiver For your records Record the serial number found on the back of the unit in the spaces designated on the warranty card and in the space provided below Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product Model KDC X494 KDC MP445U KMR 440U Serial number US Residence Only Register Online Register your Kenwood product at www kenwoodusa com 10Stepup_IM304_Ref_En_01_K Contents Before use Basic Operations General opreration Removing the Faceplate Muting the audio upon reception of phone call Audio Adjustments Audio Control Audio Preset Memory Audio Preset Recall Music disc Audio file Operation Music Search Music Search for iPod Alphabet Search Skip Search Direct Search Related Search My Playlist for iPod Direct Music Search Basic O
33. Pod iPhone software to the latest version Type of control available varies depending on the type of connected iPod See www kenwood com cs ce ipod for further details The word iPod appearing in this manual indicates the iPod or the iPhone connected with the iPod connection cable optional accessory Not supported model KCA iP500 Refer to the web site for connectable iPod and iPod connection cable www kenwood com cs ce ipod If you start playback after connecting the iPod the music that was playing on the iPod is played first In this case RESUMING is displayed without displaying a folder name etc Changing the browse item will display a correct title etc You cannot operate iPod if KENWOOD or displayed on iPod English 39 Appendix About KENWOOD Music Editor This unit supports the PC application KENWOOD Music Editor Lite ver1 0 or later When you use the audio file with database information added by the KENWOOD Music Editor Lite ver1 0 you can search a file by title album or artist name using the lt Music Search gt page 9 In the Instruction manual the term Music Editor media is used to mean the device that contains audio files with database information added with ENWOOD Music Editor KENWOOD Music Editor Lite ver1 0 is available from he following web site www kenwood com cs ce For further information on KENWOOD Music Editor Lite
34. al Manual Normal manual tuning control Auto Memory Auto Memory Memorizes six stations with good reception automatically Turn the Control knob to select YES and then press the ENTER button to start the auto memory operation Receive mode Receive mode gt Auto Digital Analog Sets the receive mode of the HD Radio Auto Automatically tunes to analog broadcast when there is no digital broadcast Digital Digital broadcasts only Analog Analog broadcasts only Memory count display TAG Memory Displays the tag memory usage of HD Radio Up to 50 tags can be registered to this unit iTunes Tagging Tagging gt ON OFF Turns ON OFF the iTunes tag memory function of HD Radio Refer to lt iTunes Tagging gt page 25 Function of Satellite Radio tuner Optional Accessory Satellite Radio Settings Seek Mode Seek Mode gt Channel Preset Selects the tuning mode of the radio Display Operation Channel Normal manual seeking control Preset Search in order of the channels in the Preset memory ESN watch ESN Watch Displays the Electronic Serial Number of satellite radio Function of KCA BT200 Optional Accessory Bluetooth Settings Phone Selection Phone Selection Select a cell phone subject to hands free connection Refer to lt Selecting the Bluetooth device You Wish to Connect gt page 3
35. als on the unit or faceplate get dirty wipe them with a clean soft dry cloth Lens Fogging When you turn on the car heater in cold weather dew or condensation may form on the lens in the CD player of the unit Called lens fogging this condensation on the lens may not allow CDs to play In such a situation remove the disc and wait for the condensation to evaporate If the unit still does not operate normally after a while consult your Kenwood dealer Notes If you experience problems during installation consult your Kenwood dealer When you purchase optional accessories check with your Kenwood dealer to make sure that they work with your model and in your area Characters that conform to ISO 8859 1 can be displayed The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used Therefore what appears on the display in the illustrations may differ from what appears on the display on the actual equipment and some of the illustrations on the display may be inapplicable Handling CDs Do not touch the recording surface of the CD Do not stick tape etc on the CD or use a CD with tape stuck on it Do not use disc type accessories Clean from the center of the disc and move outward When removing CDs from this unit pull them out horizontally If the CD center hole or outside rim has burrs use the CD only after removin
36. ber The calling party does not notify a caller ID There is no phone number data No Data There is no outgoing call list There is no incoming call list There is no missed call list There is no phone book list No Entry The cell phone has not been registered pairing HF Disconnect The unit cannot communicate with the cell phone HF Error 07 The memory cannot be accessed Turn off the power and on again If this message still appears press the reset button on the control unit HF Error 68 The unit cannot communicate with the cell phone gt Turn off the power and on again If this message still appears press the reset button on the control unit Unknown The Bluetooth device cannot be detected Device Full 5 Bluetooth device have already been registered No more Bluetooth devices are registered IN Code NG The PIN code is wrong Connect NG The unit cannot be connected to the device airing Failed Pairing error Err No Matching The voice tag is wrong Voice cannot be recognized because of an unregistered voice tag etc Too Soft Voice is too small and cannot be recognized Too Loud Voice is too large to be recognized 42 KDC x494 KDC MP445U KMR 440U Too Long The word or utterance is too long to be recognized No Phonebook Data is not contained in the phone book No Message No short message in In Box No Record The voice tag is not registered in the phonebook
37. ce recognize mode Press the AUDIO button for at least 1 second 3 Have the unit recognize your spoken name Press the ENTER button If you hear a beep speak a registered name within 2 seconds 4 Have the unit recognize the spoken category When you hear a beep speak the category within 2 seconds The recognized phone number name is displayed When you want to change the displayed phone number name press the S MODE button 5 Make a call Press the ENTER button If your voice cannot be recognized a message is displayed Refer to lt Troubleshooting Guide gt page 41 Pressing the ENTER button allows you to retry voice input e Both the name and category requires registration of a voice tag Refer to lt Setting a Voice Command for Category gt page 36 30 KDC x494 KDC MP445U KMR 440U Displays of phone number type category The category items in the Phone Book are displayed as follows Display Information General Prat General Home A Home Office ET Office Mobile Mobile Other pena Other Function of KCA BT200 Optional Accessory Bluetooth Audio Operation Before Use For details on the Bluetooth Audio player which can be connected see lt About the Bluetooth Audio player gt page 40 You need to register your Bluetooth Audio player before using it with this unit For more details see lt Registering Bluetooth device gt page
38. ched or dirty ts Clean the media referring to the CD cleaning of WY The recording condition is bad ts Record the media again or use another media The messages shown below display your systems condition TOC Error No disc has been loaded in the disc magazine The CD is quite dirty The CD is upside down The CD is scratched a lot Error 05 The disc is unreadable Error 77 The unit is malfunctioning for some reason Press the reset button on the unit If the Error 77 code does not disappear consult your nearest service center Error 99 Something is wrong with the disc magazine Or the unit is malfunctioning for some reason gt Check the disc magazine And then press the reset button on the unit If the Error 99 code does not disappear consult your nearest service center IN Blink The CD player section is not operating properly Reinsert the CD If the CD cannot be ejected or the display continues to flash even when the CD has been properly reinserted please switch off the power and consult your nearest service center Protect Blink The speaker wire has a short circuit or touches the chassis of the vehicle and then the protection function is activated Wire or insulate the speaker cable properly and press the reset button If the Protect code does not disappear consult your nearest service center Unsupported File An Audio file is played with a format that this uni
39. d Control by Hand Hands Mode gt ON When set to ON allows you to operate iPod with the control on the iPod Scan play Track Scan CD File Scan Audio file gt ON OFF When set to ON plays the intro of the music in the disc folder successively Random play Disc Random CD Folder Random Audio file iPod gt ON OFF When set to ON plays the music in the disc folder randomly All Random play All Random gt ON OFF When set to ON all songs in iPod are played at random Track File Repeat play Track Repeat CD File Repeat Audio file iPod gt ON OFF When set to ON plays the music repeatedly J Disc Folder Repeat Disc Repeat CD changer Folder Repeat Audio file gt ON When set to ON plays the music in the disc folder repeatedly Magazine Random MGZN Random gt ON When set to ON plays the music in the disc changer randomly w Display Control H Display Type Selection Display Control gt 5 types Sets the display pattern Display type Display information TypeA Displays 2 lines of text Type B Displays a line of text Type C Displays the status Type D Displays the clock Type E Displays the spectrum analyzer Refer to lt Selecting Display Type gt page 22 Display Side Selection DISP
40. dialing command Setting a Voice Command for Category SMS Short Message Service 37 Displaying the SMS Downloading the SMS Basic Operations of remote control 38 Appendix 39 Troubleshooting Guide 41 Specifications 43 Before use AWARNING To prevent injury or fire take the following precautions To prevent a short circuit never put or leave any metallic objects such as coins or metal tools inside the unit Before using this unit for the first time This unit is initially set on the Demonstration mode When using this unit for the first time cancel the Demonstration mode Refer to lt Exit Demonstration Mode gt page 4 How to reset your unit If the unit fails to operate properly press the Reset button The unit returns to factory settings when the Reset button is pressed Reset button Cleaning the Unit If the faceplate of this unit is stained wipe it with a clean soft dry such as a silicon cloth If the faceplate is stained badly wipe the stain off with a cloth moistened with a neutral cleaner then wipe it again with a clean soft dry cloth Applying spray cleaner directly to the unit may affect its mechanical parts Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erase characters Unit and Faceplate Terminals To prevent deterioration do not touch the terminals of the unit and faceplate with your fingers If the termin
41. e Top40 Jazz Game Natural User Bass Adjust Bass Center FRO Bass Center 40 50 60 70 80 100 Frequency 120 150 Hz Bass Level Bass level 8 8 dB Bass Q Factor Bass Q Factor 1 00 1 25 1 50 2 00 Bass EXT Bass Extend OFF O Middle Adjust Middle Center Middle Center 0 5 1 0 1 5 2 0 kHz FRO Frequency Middle Level Middle level 8 8 dB Middle Q Factor Middle Q Factor 1 00 2 00 Treble Adjust Treble Center FRO Treble Center 10 0 12 5 15 0 17 5 kHz Frequency Treble Level Treble level 8 8 dB Balance Balance Left 15 Right 15 Fader Fader Rear 15 Front 15 2Zone Rear Volume Rear volume during 0 35 Dual zone SubWoofer Level Subwoofer level 15 15 dB Detailed Settings HPF Front Front High Pass rough 40 60 80 Filter 00 120 150 180 220 Hz HPF Rear Rear High Pass Filter Through 40 60 80 00 120 150 180 220 Hz LPF SubWoofer Low Pass Filter 50 60 80 100 120 hrough Hz Subwoofer Phase Subwoofer Phase Reverse 180 lormal 0 lone Dual Zone System ON OFF 2Zone F R Select Dual Zone output _Rear Fron channel Supreme Supreme setting ON OFF Audio Preset Audio Preset Recall Memory memoy Volume Offset Volume offset 8 0 dB ADJ AUX 8 8 Function of KDC X494 tRefer t
42. e containing songs tracks or files Pause and play Press the 45 button to pause or resume playing a song track or file Removing Disc and USB device Press the 4 button to eject a disc Keeping the button pressed for at least 2 seconds enters the USB Remove mode USB REMOVE is displayed and the USB device can be removed safely e CA UTEX optional accessory is recommended to connect a USB device CA U1EX e KCA iP101 optional accessory is recommended to connect an iPod For the playable audio files devices iPod see lt Appendix gt page 39 Listening to Radio Selecting a Tuner source 1 Press the SRC button 2 Turn the Control knob to select TUNER and then press the ENTER button Selecting the Band Push the Control knob towards up to change the band in the order of FM1 gt FM2 FM3 Push the Control knob towards down to change the band to AM Selecting a Station Push the Control knob leftward and rightward to select the station you want to listen to Details of the station selecting in operation are set in the Seek Mode of lt Function setting gt page 16 English 5 General opreration Removing the Faceplate The faceplate of the unit can be detached and taken with you helping to deter theft Detaching the Faceplate Press the Release button Reattaching the Faceplate Refer to the following diagram when reattaching the faceplate Remove the face
43. e tag to the phone number category type for voice calling 1 Enter Bluetooth mode Press the FNC button for at least 1 second BT MODE is displayed 2 Enter Function setting mode Press the FNC button 3 Select Phone Number type edit mode The item can be selected and determined as follows Settings gt Voice Tag gt PN Type Edit To select the item turn the Control knob To determine the item press the ENTER button 4 Enter Phone Number type edit mode Press the ENTER button 5 Select the category type you wish to set Turn the Control knob to select desired category name and then press the ENTER button General Home Office Mobile Other 6 Select a mode Turn the Control knob Display Operation Register Register a voice tag Check Play a voice tag Delete Delete a voice tag Displayed only when a name for which a voice tag has been registered is selected 7 Register the category type by performing steps 6 to 7 in lt Adding a voice dialing command gt page 35 8 Exit Bluetooth mode Press the SRC button e Set the voice tag for all the 5 categories If the voice tag is not registered for all the categories the Phonebook may not be recalled by voice command 36 KDC X494 KDC MP445U KMR 440U Function of KCA BT200 Optional Accessory SMS Short Message Service Displaying the SMS The SMS received by at the c
44. earch for music Operation type Operation Movement between items Turn the Control knob Selection of item Press the ENTER button Return to previous item Push the Control knob towards up Cancelling the Related Search Press the 45 button for at least 1 second e Related search cannot be performed while playing a Podcast When the music being played has no information on browsing items or no music was found Not Found is displayed English 11 Music disc Audio file Operation Function of iPod source My Playlist for iPod You can register your favorite songs to make a playlist You can register up to ten songs in the playlist Registering a song in the playlist 1 Play the song you want to register Push the Control knob towards up down right and left 2 Register the song Press the ENTER button for at least 2 seconds Hit registration number Stored is displayed You can register up to ten songs When creating a playlist you can register the songs stored in one iPod If you attempt to register a song by connecting an unregistered iPod My Playlist Delete is displayed Selecting YES deletes the playlist The song displayed during music search can be registered in the same manner For the music search procedure refer to lt Music Search for iPod gt page 9 If you attempt to register the eleventh song Memory Full is displayed and you cannot register the song To
45. ectrum analyzer amp Clock Speana Clock Date Date Displays the status Type A display only Indicator Blank Blank In HD Radio Optional accessory source Information Display Frequency Frequency Station name Station Name Title amp Artist name KTC HR300 only Title Artist Album amp Artist name KTC HR300 only Album Artist Title KTC HR200 only Title Spectrum analyzer amp Clock Speana Clock Date Date Displays the status Type A display only Indicator Blank Blank In CD amp External disc source Information Display Disc title Disc Title Track title Track Title Play time P Time Spectrum analyzer amp Clock Speana Clock Date Date Displays the status Type A display only Indicator Blank Blank In Audio file iPod source Information Display Title amp Artist name Title Artist Album amp Artist name Album Artist Folder name Folder Name File name File Name Play time P Time Spectrum analyzer amp Clock Speana Clock Date Date Displays the status Type A display only Indicator Blank Blank In Standby Auxiliary input source Information Display Source name Source Name Spectrum analyzer amp Clock AUX only Speana Clock Clock
46. ell phone is displayed on the receiver A newly received message is displayed A e To prevent car accidents the driver should not read the SMS while driving When a new message arrives SMS Received is displayed The display disappears with any operations Displaying the SMS 1 Enter Bluetooth mode Press the FNC button for at least 1 second BT MODE is displayed 2 Enter Function setting mode Press the FNC button 3 Select SMS Inbox mode The item can be selected and determined as follows Settings gt SMS Inbox To select the item turn the Control knob To determine the item press the ENTER button 4 Select a message Turn the Control knob Each press of the S MODE button switches between displaying the telephone number or name and message reception date 5 Display the text Press the ENTER button Turn the Control knob to scroll through the message Press the ENTER button to return to the message list screen 6 Exit Bluetooth mode Press the SRC button e The unopened message is displayed at the beginning of the list Other messages are displayed in the order of reception e The SMS that are received when the cell phone is not linked with Bluetooth cannot be displayed Download the SMS e The short message cannot be displayed during downloading the SMS Downloading the SMS Download the short message SMS received by the cell phone so that it can be read on this unit 1
47. ems that appear when the AUX Key Beep 29 source is selected Built in AUX CD Read 31 Function item list No Favorite Delete 2 Settings Name Set Built in AMP B3 o Speaker Select B4 Function items that appear in the BT mode FAW Update Function item list No Function items that appear during settings An selection layback of a CD audio file or iPod Udio Selci pray SMS Download ad Function item list No SMS Inbox T Play Mode Hands Mode iPod 07 Voice Tag B Name E it as Track Scan CD File Scan Audio file o2 n PN Type Edit E Disc Random CD Folder Random Audio Detailed Settings Device Regist m file iPod SPCLDVCSelect Gl All Random iPod o4 Device Delete _ Track Repeat CD File Repeat Audio file PIN Code Edit iPod Auto Answer 54 Disc Repeat CD changer Folder amp Bluetooth HF 55 Repeat Audio file Audio MGZN Random Disc changer Call Beep 56 Settings Skip Search iPod Music Editor media 25 BT F W Update My Playlist Delete iPod 26 English 21 Display Settings Selecting Display Type Shown below are examples of display types Display type Display information Type A Displays 2 l
48. er the Function setting mode 2 The item can be selected and determined as follows Settings gt Clock amp Date gt Clock Adjust To select the item turn the Control knob To determine the item press the ENTER button 3 Turn the Control knob to adjust the hour and then press the ENTER button 4 Turn the Control knob to adjust the minute and then press the ENTER button 5 Turn the Control knob to select Date Adjust and then press the ENTER button 6 Turn the Control knob to adjust the year and then press the ENTER button 7 Turn the Control knob to adjust the month and then press the ENTER button 8 Turn the Control knob to adjust the day and then press the ENTER button 4 KDC X494 KDC MP445U KMR 440U 9 Turn the Control knob to select Date Mode and then press the ENTER button 10 Turn the Control knob to select Date format and then press the ENTER button 11 Press the 45 button for at least 1 second to exit the Function setting mode Common Operation Power and source selection Turns the power ON by pressing the SRC button When the power is ON select a source Press the SRC button and then turn the Control knob To determine the selected source press the ENTER button Tuner TUNER or HD RADIO gt USB USB or iPod iPod gt CD CD gt Auxiliary Input AUX gt Standby STANDBY gt Tuner
49. g the burrs with a ballpoint pen etc CDs that cannot be used CDs that are not round cannot be used CDs with coloring on the recording surface or CDs that are dirty cannot be used This unit can only play the CDs with aise EREB This unit may not correctly play discs which do not have the mark You cannot play a CD R or CD RW that has not been finalized For the finalization process refer to your CD R CD RW writing software and your CD R CD RW recorder instruction manual 3 inch CD cannot be used Attempt to insert using an adapter can cause malfunction English 3 Basic Operations Q SRC Release Disc slot A USB Terminal C A OsRC KENWOOD gt C z rc ENS SAE s eee AUDIO 5 FNC Control ENTER FAVORITE S MODE AUDIO Auxiliary input Knob Before Using Exit Demonstration Mode Turn off the demonstration mode when you use it for the first time after installation 1 Press the ENTER button to quit the demonstration mode when the messages To Cancel DEMO Press the ENTER Key are displayed approx 15 seconds 2 Turn the Control knob to select YES and then press the ENTER button The demonstration mode can also be canceled in the Function setting mode Refer to Hj Demo Mode of lt Function setting gt page 16 Adjusting the Clock amp Date 1 Press the FNC button to ent
50. haracter other than A to Z and 1 to 9 enter If the first character string begins with an article a an or the in the alphabet search mode it is searched for in defiance of the article 10 KDC x494 KDC MP445U KMR 440U Function of iPod source Music Editor media Skip Search The number of songs to be skipped is determined by the ratio of the total number of songs in the list which is selected 1 Enter Music Search mode Press the Q button MUSICSEARCH is displayed 2 Enter Search select mode Press the S MODE button 3 Select Skip Search mode Turn the Control knob to select Skip Search and then press the ENTER button 4 Search for music Operation type Operation Movement between items Turn the Control knob Skip Search Push the Control knob towards up or down Selection of item Press the ENTER Return to previous item Press the lt button Cancelling the Music Search mode Press the 45 button for at least 1 second Set the ratio with Skip Search in lt Function setting gt page 16 e Keep pushing Control knob for 3 seconds or longer skips songs at 10 regardless of the setting Function of iPod source Direct Search Searching for music by selecting a browse item and an alphabetic character s 1 Enter Music Search mode Press the Q button MUSICSEARCH is displayed 2 Enter Search select mode Press the S MODE button
51. he ENTER button 20 KDC x494 KDC MP445U KMR 440U Function list Function items that appear when any Function items that appear when the tuner source is selected source is selected Function item list No Settings Seek Mode 22 Function item list No Auto Memory 23 Settings Clock amp Date Cock Adjust 12 MONO 24 Date Adjust 13 Date Mode TE Function items that appear when the HD DISP amp ILLUMI DSP OFF Mod E Radio source is selected Display Dimmer Text Scroll Function item list No BT DVC Status ig Settings Seek Mode HD Radio LLUMI Dimmer Auto Memory HD Radio Bg ILLUMI Effect 20 Receive mode 39 ILLUMI Music SYNC 2D TAG Memory m Display Control DISP SELECT og Tagging a DISP Side Sele DISP Text Select W Function items that appear when the DISP GRPHC Select 0 Satellite Radio source is selected DEMO Mode Function item list No Function items that appear during standby Settings Seek Mode Satellite Radio a aaa EES ESN Watch 43 Function item list No Initial Settings SRC Select 2g Function it
52. in this unit will be different from the list in iPod The FAVORITE registration should be performed again after editing the items in iPod To use this function this unit must be powered for more han one hour Favorite Preset Recall Retrieving an item registered to Favorite 1 Enter Favorite Preset Recall mode Press the FAVORITE button 2 Select the number to recall in the Favorite memory Turn the Control knob 3 Recall the Favorite Preset Press the ENTER button Cancelling the Favorite Preset Recall mode Press the 45 button Deleting Favorite Preset Memory Deleting an item registered to Favorite 1 Select Standby Press the SRC button Select the STANDBY display For how to select source item refer to lt Power and source selection gt page 4 2 Enter Function setting mode Press the FNC button 3 Select Favorite Delete mode The item can be selected and determined as follows Initial Settings gt Favorite Delete To select the item turn the Control knob To determine the item press the ENTER button 4 Select the number you want to delete Turn the Control knob to select memory number and then press the ENTER button Favorite Delete is displayed Select All if you want to delete all 5 Turn the Control knob to select YES and then press the ENTER button Completed is displayed 6 Exit Function setting mode Press the
53. ines of text Type B Displays a line of text Type C Displays the status ON OFF indicator for each function Type D Displays the clock Type E Displays the spectrum analyzer 1 Enter Function setting mode Press the FNC button 2 Select Display control mode Turn the Control knob to select Display Control and then press the ENTER button 3 Select the Display type Turn the Control knob to select Display type and then press the ENTER button 4 Select Display information item Turn the Control knob to select Display information item and then press the ENTER button The following display information items can be set Side display selection When selecting Display type A B D or E Select the DISP Side Select display Refer to Display Side Selection of lt Function setting gt page 16 Text display selection When selecting Display type A or B Select the DISP Text Select display Refer to lt Selecting Text Display gt page 22 Graphic selection When selecting Display type E Select the DISP GRPHC Select display Refer to J Display Graphic Selection of lt Function setting gt page 16 5 Exit Function setting mode Press the 45 button for at least 1 second 22 KDC X494 KDC MP445U KMR 440U Selecting Text Display Changes displayed information on each of the following sources In Tuner source Information Display Frequency Frequency Sp
54. ite Radio source Press the SRC button Select the SIRIUS or XM display For how to select source item refer to lt Power and source selection gt page 4 e You need to register to the service provider to receive the service by Satellite Radio Consult the service provider if CALL TO SUBSCRIBE appears e The radio may take a little time to start receiving after you select the Satellite Radio source If the signal reception fails Acquiring Signal No Signal appears Selecting the channel Push the Control knob towards right or left Selecting the Preset Band Push the Control knob toward up Each time you push the knob the preset band alternates between the SR1 SR2 SR3 and SR4 Category and Channel Search Selecting the channel and category you want to receive 1 Enter Category and Channel Search mode Press the Q button twice 2 Select the Category Turn the Control knob to select Category and then press the ENTER button 3 Select the Channel Turn the Control knob to select Channel and then press the ENTER button Cancelling Category and Channel Search mode Press the 45 button for at least 1 second e You cannot Channel search until the category information is acquired 26 KDC X494 KDC MP445U KMR 440U Channel Preset Memory Putting the channel in the memory 1 Select the channel to put in the memory Push the Control knob towards right or left 2 En
55. lect the HD AM band Push the Control knob towards down 3 Tune up or down program Push the Control knob towards right or left If the sub channel is available in Digital FM broadcast when Seek Mode of lt Function setting gt page 16 is set to Auto seek or Manual the channel can be switched Example lt lt Analog FM M Analog FM Digital FM Analog FM Digital FM 1ch Digital FM 2ch Digital FM 8ch gt gt Digital FM lt Tuning Mode gt Auto seek or Manual lt Receive Mode gt Auto mode HD FM band During the reception of tune up OO During the reception of amp tune down 40 By using the Receive mode of lt Function setting gt page 16 the modes can be switched to digital broadcast automatic switching analog broadcast only or digital broadcast only When Digital has been set with Receive Mode the seek time will be longer to allow a check of whether the transmission is a digital broadcast It will take few seconds to receive the digital broadcasting after selecting the frequency When Tuning up it will switch to the next frequency if it is switched before receiving a Digital broadcast When Tuning down it will received an Analog broadcasting if a Digital broadcast is not received 24 KDC X494 KDC MP445U KMR 440U Station Preset Memory Putting a station in the memory 1 Select the frequency to put in the memory P
56. ll Press the ENTER button Pressing S MODE button each time switches between name and telephone number The outgoing call list the incoming call list and the missed call list are the lists of calls originated from and received at this unit They are not the ones stored in the cell phone memory Speed dialing Preset dial 1 Enter Bluetooth mode Press the FNC button for at least 1 second BT MODF is displayed 2 Select the number you want to recall from the memory Turn the Control knob to select recall number P1 P6 and then press the ENTER button 3 Make a call Press the ENTER button e You need to register the preset dial number Refer to lt Registering to the Preset Dial Number List gt page 29 Registering to the Preset Dial Number List 1 Enter the phone number you wish to register Enter the phone number with reference to the following Dialing a number Calling a number in the call log Calling a number in the Phone Book 2 Enter Preset Memory mode Press the Q button 3 Select a number and store it in the memory Turn the Control knob to select memory number P1 P6 and then press the ENTER button for at least 2 second Cancelling the Preset Memory mode Press the 45 button During a call Disconnecting a Call Press the SRC button Switching to the Private Mode Push the Control knob towards right or left Switches between Private talk PRIVATE
57. o lt Audio Preset Memory gt page 8 lt Audio Preset Recall gt page 8 e User The customized Bass Middle and Treble levels are effective You can set Bass Middle and Treble for each source About Supreme Technology to extrapolate and supplement with proprietary algorithm the high frequency range that is cut off when encoding at low bit rate less than 128Kbps Sampling frequency is 44 1kHz Supplementing is optimized by compression format MP3 or WMA and processed according to bit rate The effect is negligible with music that is encoded at high bit rate variable bit rate or has minimal high frequency range About Dual Zone System Main source and sub source Auxiliary input output Front channel and Rear channel separately When 2Zone is set to ON the main source sound and AUX input sound are output to the front speakers and rear speakers separately Set up the channel of sub source by 2Zone Select Main source by SRC button Adjust the volume of Front channel by Control knob Adjust the volume of Rear channel by 2Zone Rear Volume The Audio Control has no effect on sub source When Bluetooth audio source is selected set 2Zone F R Select to Rear 2Zone cannot be turned ON when this is set to Front While 2Zone is turned ON 2Zone F R Select function is disabled 1 Select the source to adjust Press the SRC button
58. peration of Disc Changer Optional Direct Search in Disc Changer Optional Tuner Operation 14 Station Preset Memory Preset Tuning Direct Access Tuning Favorite Control 15 Favorite Preset Memory Favorite Preset Recall Deleting Favorite Preset Memory Function setting 16 Display Settings 22 Selecting Display Type Selecting Text Display HD Radio tuner control 24 Tuning Station Preset Preset Tuning iTunes Tagging Direct Access Tuning emory Satellite Radio tuner Optional Accessory control 26 Basic Operation Category and Channel Search Channel Preset Memory Preset Tuning Channel Scan Direct Access Tuning 2 KDC X494 KDC MP445U KMR 440U Operation of hands free phoning 28 Before Use Receiving a call Calling a number in the Phone Book Dialing a number Calling a number in the call log Speed dialing Preset dial Registering to the Preset Dial Number List During a call Call waiting Clearing the Disconnection Message aking a voice dialing call Displays of phone number type category Bluetooth Audio Operation 31 Before Use Basic Operation Bluetooth Setup 32 Registering Bluetooth device Registering Special Bluetooth device Registering PIN Code Downloading the Phone Book Selecting the Bluetooth device You Wish to Connect Deleting a Registered Bluetooth device Displaying the Firmware Version Adding a voice
59. perly CR2025 following the illustration Pull out i b g Side inside the case A CAUTION Keep battery out of reach of children and in original package until ready to use Dispose of used batteries promptly If swallowed contact physician immediately Do not leave the battery near fire or under direct sunlight A fire explosion or excessive heat generation may result Do not set the remote control in hot places such as on the dashboard Danger of explosion if Lithium battery is incorrectly replaced Replace only with the same or equivalent type Appendix About Audio file Playable Audio file P3 mp3 WMA wma e Playable disc media CD R RW ROM e Playable disc file format SO 9660 Level 1 2 Joliet Romeo Long file name e Playable USB device USB mass storage class e Playable USB device file system FAT 16 FAT32 Even if the audio files comply with the standards listed above the play may be impossible depending on the types or conditions of media or device e Playing order of the Audio file In the example of folder file tree shown below the files are played in the order from to 40 oco I LA Folder e Audio file dO L DO 5 T DO i L bo An online manual about audio files is put on the site www kenwood com cs ce audiofile On this online manual detailed information and notes which are not written in this manual are provided Make sure to read through the
60. plate at once after pressing the Release button otherwise it can fall down due to vibration The faceplate is a precision piece of equipment and can be damaged by shocks or jolts Keep the faceplate in its faceplate case while detached Do not place the faceplate and the faceplate case in areas exposed to direct sunlight excessive heat or humidity Also avoid places with too much dust or the possibility of water splashing 6 KDC X494 KDC MP445U KMR 440U Muting the audio upon reception of phone call The audio system automatically mutes when a call comes in When a call comes in CALL is displayed The audio system pauses Listening to the audio during a call Press the SRC button The CALL display disappears and the audio system comes back ON When the call ends Hang up the phone The CALL display disappears and the audio system comes back ON e To use the TEL Mute feature you need to hook up the MUTE wire to your telephone using a commercial telephone accessory Refer to lt Connecting Wires to Terminals gt Quick Start Guide Audio Adjustments Audio Control You can adjust following Audio Control items Display Audio item Range SubWoofer Subwoofer output OFF 0 Bass Boost Bass Boost Level1 Level2 OFF System Q Preset Equalizer Rock Pops Easy curv
61. ption MONO gt ON OFF You can reduce the noise when stereo broadcasts are received as monaural English 17 Function setting iPod Settings Skip Search Skip Search gt 0 5 1 5 10 Sets the ratio of skip performed with lt Skip Search gt page 10 2 My Playlist Delete My Playlist Delete Deletes the songs registered in My Playlist Turn the Control knob to select YES and then press the ENTER button to delete My Playlist AUX Settings Name Set Name Set gt AUX DVD PORTABLE GAME VIDEO TV Sets the display when switched to AUX source Initial Settings A Source Select Mode SRC Select gt 1 2 Sets the source selection method E Beep Key Beep gt ON OFF Setting the operation check sound beep sound ON OFF E Built in AUX Built in AUX gt ON OFF Sets whether to display AUX during source selection Bl CD Read CD Read gt 1 2 Sets the method for reading CD When unable to play special format CD set this function to 2 to force playing Note that some music CDs may be unplayable even when set to Pa In addition audio files cannot be played when set to 2 Normally keep this set to 1 1 Automatically distinguishes between audio file disc and music CD when playing disc 2 Forces playing as music CD A Favorite Delete Favorite Delete gt P
62. reset No All Deletes Favorite Preset Memory Refer to lt Deleting Favorite Preset Memory gt page 15 Built in Amp setting Built in AMP gt ON OFF Selecting OFF turns off the built in amplifier Turning off the built in amplifier improves the quality of the sound from Preout 18 KDC X494 KDC MP445U KMR 440U E Speaker Select Speaker Select gt OFF 5 4inch 6x9 6inch O E M Fine tuning so that the System Q value is optimal when setting the speaker type as follows Speaker type Display OFF OFF For 5 amp 4in speaker 5 4inch For 6 amp 6x9 in speaker 6x9 6inch For the OEM speaker OEM Firmware Upgrade F W Update gt USB CD Upgrades the firmware Selecting YES and then pressing ENTER button starts upgrading the firmware For how to update the firmware access our web site http www kenwood com cs ce Demo Mode Settings Ea Demo Mode DEMO Mode gt ON OFF Specifies whether to enable demonstration Function of KTC HR300 KTC HR200 Optional Accessory HD Radio Settings Seek Mode Seek Mode gt Auto1 Auto2 Manual Selects the tuning mode of the radio Tuning mode Display Operation Auto seek Autol Automatic search for a station Preset station seek Auto2 Search in order of the stations in the Preset memory Manu
63. ssary for registering this unit 1 Enter Bluetooth mode Press the FNC button for at least 1 second BT MODE is displayed 2 Enter Function setting mode Press the FNC button 3 Select PIN code edit mode The item can be selected and determined as follows Settings gt Detailed Settings gt PIN Code Edit To select the item turn the Control knob To determine the item press the ENTER button 4 Input the PIN code Operation type Operation Select the numbers Turn the Control knob Move to the next digit Push the Control knob towards right Delete the last digit Push the Control knob towards left 5 Register a PIN code Press the ENTER button If Completed is displayed registration is complete 6 Exit Bluetooth mode Press the SRC button e By default 0000 is specified A PIN code can be specified with up to eight digits Downloading the Phone Book Download the phone book data from the cell phone to this unit so that you can use the Phone Book of this unit Downloading automatically If the cell phone supports a phone book synchronization function the phone book is downloaded automatically after Bluetooth connection e Setting on the cell phone may be required If no phone book data is found in the unit even after the Completed is displayed your cell phone may not support automatic download of phone book data In this case try downloading manually
64. t can t support Copy Protection A copy protected file is played Read Error The file system of the connected USB device is broken Copy the files and folders for the USB device again If the error message is still displayed initialize the USB device or use other USB devices The USB device is selected as a source although no USB device is connected Change the source to any source other than USB Connect an USB device and change the source to USB again No Device N A Device An unsupported USB device is connected Connection to the iPod has failed Check that the connected iPod is an iPod that is supported See lt About Audio file gt page 39 for information on supported iPods English 41 Troubleshooting Guide No Music Data Error 15 The connected USB device contains no playable audio file Media was played that does not have data recorded that the unit can play USB ERROR Some trouble may have occurred to the connected USB device gt Remove the USB device then cycle the power switch to ON If the same display is repeated use another USB device Connection to the iPod has failed gt Remove the USB device and then reconnect it Confirm that the software for the iPod is the latest version iPod Error USB REMOVE Blink The Remove mode has been selected for the USB device iPod You can remove the USB device iPod safely No Num
65. t the dealer or an experienced radio TV technician for help This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material special handling may apply See www dtsc ca gov hazardouswaste perchlorate This symbol mark indicates that Kenwood manufactured this product so as to decrease harmful influence on the environment HD Radio and the HD Radio Ready logo are proprietary trademarks of iBiquity Digital Corporation iTunes is a trademark of Apple Inc iPod is a trademark of Apple Inc registered in the U S and other countries iPhone is a trademark of Apple Inc Made for iPod means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards Works with iPhone means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards
66. ter Preset Memory mode Press the Q button 3 Select the number to put in the memory Turn the Control knob 4 Register channel to preset number Press the ENTER button for at least 2 seconds Cancelling the Preset Memory mode Press the Q button e Only the channel number is stored Category information is not stored Preset Tuning Recalling the channels in the memory 1 Enter Preset Tuning mode Press the Q button 2 Select a desired channel in the memory Turn the Control knob 3 Recall the channel Press the ENTER button Cancelling Preset Tuning Press the Q button Channel Scan Every receivable Channel is checked for 10 seconds 1 Start Channel Scan Press the S MODE button 2 Release it when the channel you want to listen to is received Press the S MODE button Function of remote control Direct Access Tuning Entering the channel and tuning 1 Enter Direct Access Tuning mode Press the DIRECT button on the remote control 2 Enter the channel Press the number buttons on the remote control 3 Search the channel Press the lt lt or gt gt button on the remote control Cancelling Direct Access Tuning Press the 45 button on the remote control e If you make no button operation for 10 seconds the Direct Access Tuning mode is automatically canceled e If you cannot receive any signal in the input Channel due to bad conditions on radio wave or other such problems
67. the ENTER button If a voice tag has already been registered for a name is displayed before the name 5 Select a mode Turn the Control knob Display Operation Register Register a voice tag Check Play a voice tag Delete Delete a voice tag Displayed only when a name for which a voice tag has been registered is selected Selecting Register Regist 6 Register a voice tag first Press the ENTER button When you hear a beep speak the voice tag within 2 seconds 7 Confirm the voice tag second Press the ENTER button When you hear a beep speak the same voice tag again within 2 seconds Completed is displayed 8 Exit Function setting mode Press the 45 button for at least 1 second Return to step 2 You can register another voice tag continuously If your voice cannot be recognized a message is displayed Refer to lt Troubleshooting Guide gt page 41 Pressing the ENTER button allows you to retry voice input Selecting Check Play 6 Press the ENTER button Play the registered voice and return to step 2 Selecting Delete Delete 6 Delete a voice tag Press the ENTER button 7 Turn the Control knob to select YES and then press the ENTER button Exit Bluetooth mode Press the SRC button English 35 Function of KCA BT200 Optional Accessory Bluetooth Setup Setting a Voice Command for Category Add a voic
68. tion to select the audio player To select the item turn the Control knob To determine the item press the ENTER button name is displayed 4 Select the Bluetooth device Turn the Control knob 5 Set up the Bluetooth device Press the ENTER button name or name is displayed The selected Bluetooth device is busy The selected Bluetooth device is on standby blank The Bluetooth device is deselected 6 Exit Bluetooth mode Press the SRC button Ifa cell phone is already selected deselect it and then select a different one If you cannot select a device using the audio player connect the device with the audio player Deleting a Registered Bluetooth device You can delete a registered Bluetooth device 1 Enter Bluetooth mode Press the FNC button for at least 1 second BT MODE is displayed 2 Enter Function setting mode Press the FNC button 34 KDC x494 KDC MP445U KMR 440U 3 Select Bluetooth device deletion mode The item can be selected and determined as follows Settings gt Detailed Settings gt Device Delete To select the item turn the Control knob To determine the item press the ENTER button Device name is displayed 4 Delete the selected Bluetooth device Turn the Control knob to select desired device name and then press the ENTER button 5 Turn the Control knob to select YES and then press the ENTER bu
69. tton Completed is displayed 6 Exit Bluetooth mode Press the SRC button e When a registered cell phone is deleted its Phone Book log SMS and voice tag are also deleted Displaying the Firmware Version Display the version of the firmware of this unit 1 Enter Bluetooth mode Press the FNC button for at least 1 second BT MODE is displayed 2 Enter Function setting mode Press the FNC button 3 Select Bluetooth Firmware update mode The item can be selected and determined as follows Settings gt Detailed Settings gt BT F W Update To select the item turn the Control knob To determine the item press the ENTER button The firmware version appears 4 Exit Bluetooth mode Press the SRC button For how to update the firmware access our web site www kenwood com bt information Adding a voice dialing command Add a voice tag to the phonebook for voice dialing You can register up to 35 voice tags 1 Enter Bluetooth mode Press the FNC button for at least 1 second BT MODE is displayed 2 Enter Function setting mode Press the FNC button 3 Select Phonebook name edit mode The item can be selected and determined as follows Settings gt Voice Tag gt PB Name Edit To select the item turn the Control knob To determine the item press the ENTER button 4 Search for the name to register Turn the Control knob to select name and then press
70. ush the Control knob towards right or left 2 Enter Preset Memory mode Press the Q button LIST amp MEMORY is displayed 3 Select the number to put in the memory Turn the Control knob 4 Determine the number to put in the memory Press the ENTER button for at least 2 seconds Cancelling the Preset Memory mode Press the 45 button Preset Tuning Recalling the stations in the memory 1 Enter Preset Tuning mode Press the Q button 2 Select a desired station in the memory Turn the Control knob 3 Recall the station Press the ENTER button Cancelling Preset Tuning Press the 45 button Function of KTC HR300 iTunes Tagging By using an iTunes Tagging enabled HD Radio you can tag your music When you hear a song you enjoy on your local HD Radio station you only have to press the ENTER button The song s information will then be saved on this unit The saved songs will then show up in a playlist called Tagged in iTunes the very next time you sync your iPod to your computer Then you just need to click and then easily buy and download the song you were tagging directly from the Apple iTunes Music Store 1 Enter HD Radio iTunes tagging mode Press the ENTER button TAG will be indicated on the display when song information can be registered TAG Storing is indicated on the display while a tag s being stored to this unit TAG Stored is indicated on the display after a tag
71. ver1 0 refer to the site above or the application help About Satellite Radio tuner Optional This unit supports Satellite Radio tuners which are released by SIRIUS and XM Refer to the instruction manual of Satellite radio tuner About HD Radio Reception Optional When you connect an HD Radio tuner Tuner features of the unit are disabled and changed to HD Radio tuner features With the HD Radio tuner you can use the similar functions of Tuner features Refer to Tuner features for how to use the functions 40 KDC X494 KDC MP445U KMR 440U About the Cell Phone This unit conforms to the following Bluetooth specifications Version Bluetooth Standard Ver 1 2 Profile HFP Hands Free Profile OPP Object Push Profile PBAP Phonebook Access Profile SYNC Synchronization Profile For the cell phones verified for compatibility access the following URL http www kenwood com cs ce bt The units supporting the Bluetooth function have been certified for conformity with the Bluetooth Standard following the procedure prescribed by Bluetooth SIG However it may be impossible for such units to communicate with your cell phone depending on its type HFP is a profile used to make a hands free call OPP is a profile used to transfer data such as a phone book between units About the Bluetooth Audio player This unit conforms to the following Bluetooth specifications Version Bluetooth Standard Ver 1
72. you press the Reset all the sources will be the setting value which is registered The following items can be registered Bass Center FRQ Bass Level Bass Q Factor Bass EXT Middle Center FRQ Middle Level Middle Q Factor Treble Center FRO Treble Level SubWoofer Level HPF Front HPF Rear LPF SubWoofer Subwoofer Phase 8 KDC X494 KDC MP445U KMR 440U Audio Preset Recall Recalling the sound setup registered by lt Audio Preset Memory gt page 8 1 Select the source Press the SRC button For how to select source item refer to lt Power and source selection gt page 4 2 Enter Audio Control mode Press the AUDIO button 3 Select Audio preset memory mode The item can be selected and determined as follows Detailed Settings gt Audio Preset To select the item turn the Control knob To determine the item press the ENTER button 4 Select the Audio Preset Recall Turn the Control knob to select Recall and then press the ENTER button 5 Turn the Control knob to select YES and then press the ENTER button Recall Completed is displayed 6 Exit Audio Control mode Press the 45 button for at least 1 second Music disc Audio file Operation Function of Audio file Internal CD source Music Search Selecting the music you want to listen to from the device or media being played now 1 Enter Music

Download Pdf Manuals

Related Search

Related Contents

Application Jukebox Player User Guide  PDF manual  Samsung 23” TV-näyttö, korkealaatuinen ääni Käyttöopas  DgnXchange User Manual    Benutzerhandbuch für den Z31  CHUQ en action  

Copyright © All rights reserved. Failed to retrieve file