Home

Kenwood KDC-5020R CD Player User Manual

image

Contents

1. Entering ID3 tag JEMEN The Displayable ID3 tag is version 4 I 1 A Q a q ALA 1 2 2 B R b r xX 3 3 5 5 alo For the character code refer to the 4 viata arate List of Codes 6 amp e F V f v 7 Iw e x Entering file and folder names LY The code list characters are the only A E eju A B K E k t 0 file names and folder names that can eles 1 ly i V be entered and displayed lm If you use any other character for F 1101 111018109 entry the file and folder names not displayed correctly They may neither be displayed correctly depending on the CD writer used The unit recognizes and plays only those which have the extension MP3 E gt A file with a name entered with characters not on the code list may not play correctly Writing files into a medium When a medium containing MP3 data is loaded the unit checks all the data on the medium If the medium contains a lot of folders or non MP3 files therefore it takes a long time until the unit starts playing MP3 In addition it may take time for the unit to move to the next MP3 file or a Track Search or Album Search may not be performed smoothly Loading
2. Se 2 g a P a 5 p S oo I W mmn HID 0 c l ANS TS M H aa ea py yir Fw systema ot 8 Sx L Band display KDC 5020 ST indicator Frequency display Band display Frequency display Preset station number Tuner features Function of the KDC MPVZ020 KDC 6020 KDC 5020 Tuning Mode Direct Access Tuning Function of remote Choose the tuning mode Entering the frequency and tuning Press the AUTO button Each time the button is pressed the Tuning mode switches as shown below 1 Select the band Press the FM or AM button Tuning mode Display Operation 2 Enter Direct Access Tuning mode Auto seek Auto 1 Automatic search for a station Prese DIRECT buttonomthe remote AUTO 1 is displayed Preset station Auto 2 Search in order of the stations 3 Enter the frequency seek AUTO 2 in the Preset memory Press the number buttons on the remote Manual Normal manual tuning control Example MANUAL Desired frequency Press button 92 1 MHz FM 0 9 2 1 810 kHz AM 0 8 1 0 Canceling Direct Access Tuning Press the DIRECT button on the remote Selecting the station 1 Select tuner source Press the SRC button Select the TUNER display 2 Select t
3. You re using Non fading preout t Loudness has no effect in Non fading preout The Non fading output can t be turned ON or OFF The Switching Preout page 28 is set is set on Rear preout t Change it to Non fading preout The Security Code item isn t displayed in the Menu System The Security Code function is already activated te When the Security Code function is activated it isn t displayed in the menu items The Touch Sensor Tone doesn t sound v The preout jack is being used The Touch Sensor Tone can t be output from the preout jack 39 Troubleshooting Guide Even though Synchronize Clock is ON the clock can t be adjusted The received RDS station isn t sending time data Receive another RDS station The Dimmer function doesn t work Vv The Dimmer wire isn t connected correctly te Check the Dimmer wire connection The display color changes subtly This is because thetemperature is different than the temperature when the setting was done te The display color condition changes subtly according to the ambient temperature Tuner source Radio reception is poor The car antenna is not extended ts Pull the antenna out all the way V The antenna control wire is not connected Connect the wire correctly referring to the section on Connecting Wires to Terminals The desired frequency can t be entered with the Dire
4. for Toyota car During installation do not use any screws except for those provided The use of different screws might result in damage to the main unit Damage may occur if a screwdriver or similar tool is used with excessive force during the installations Screwing the Faceplate on the Unit Accessory 5 If you want to fasten the faceplate to the main unit so T that it does not fall off screw in the provided screws 24 X 16 mm in the holes shown below __ Never insert the taptite screw 24 x 16 mm in any other screw hole than the one specified If you screw it in another hole it will contact and may cause damage to the mechanical parts inside the unit 97 Installation W Removing the hard rubber frame 1 Engage the catch pins on the removal tool and remove the two locks on the lower level Lower the frame and pull it forward as shown in the figure Accessory Removal tool 2 When the lower level is removed remove the upper two locations The frame can be removed from the top side in the same manner B Removing the Unit 1 Refer to the section Removing the hard rubber frame and then remove the hard rubber frame 2 Remove the screw 4 x 8 on the back panel 3 Insert the two removal tools deeply into the slots on each side as shown Accessor Screw 4 8 Removal commercially available 4 Lower the removal tool toward the bottom and pull out
5. Current Operation of the button folder number AM Button FM Button 27 00 87 81900 When Album Select is selected with file being played to move from folder to folder Current Operation of the button folder number mea Button gt Button AM Button FM Button C 5 General features L SRC FM FM gt gt Release button Turning ON the Power Press the SRC button o When the power is ON the Security Code page 24 is displayed as CODE ON or CODE OFF Turning OFF the Power Press the SRC button for at least 1 second 44 AM Q DISP NAME LOUD NF AUD Selecting the Source KDC MPV7020 6020 Press the SRC button ATT indicator Source required Display Tuner TUNER A OWmLN CD CD SN My Ext di DISC CH CD2 W W xternal disc 22 Auxiliary input AUX X ZF Ss Standby Illumination only mode ALL OFF ie ee m ea gt CAN A ENS Auxiliary input one of the below optional accessories is necessary KCA S210A Speaker Setting indicator SYSTEM Q indicator CA C1AX KDC 5020 5020R ATT indicator ATT Speaker Setting indicator SYSTEM Q indicator CD changer with an Auxiliary input function installed Increasing Volume Press the A button Decreas
6. i ILLUMI Dimmer control wire Orange White Gray Black KDC MPV7020 6020 only e To front right Ignition key FRONT Speaker switch Gray Green Black Q fo ACC To rear left Ignition wire Red speaker Car fuse box T Main fuse Battery wire Yellow Car fuse box Purple Black o Ground wire Black O To car chassis ean R speaker Purple Accessories KDC 5020R External view Number of items External view Number of items 4 n 2 mm a 2 e np 40 22 The use of any accessories except for those provided might result in damage to the unit Make sure only to use the accessories shipped with the unit as shown above Installation Procedure KDC 5020R 1 To prevent a short circuit remove the key from the ignition and disconnect the battery 2 Make the proper input and output wire connections for each unit Connect the wire on the wiring harness 4 Take Connector B on the wiring harness and connect it to the speaker connector in your vehicle 5 Take Connector A on the wiring harness and connect it to the external power connector on your vehicle Connect the wiring harness connector to the unit Install the unit in your car Reconnect the battery Press the reset button wo AWARNING If you connect the ignition wire red and the battery
7. IMPORTANT INFORMATION About the disc changer CD player to be connected To connect a disc changer having the O N switch to this unit set the O N switch to To connect a disc changer having O N switch to this unit the converter cord CA DS100 and or switching adapter KCA S210A are required as options A disc changer doesn t work when it is connected without using these options If a model with no O N switch is connected some unavailable functions and information that cannot be displayed are generated Note that none of the KDC C100 KDC C302 C205 C705 and non Kenwood CD changers can be connected AN You can damage both your unit and the CD changer if you connect them incorrectly The marking of products using lasers Except for some areas CLASS 1 LASER PRODUCT The label is attached to the chassis case and says that the component uses laser beams that have been classified as Class 1 It means that the unit is utilizing laser beams that are of a weaker class There is no danger of hazardous radiation outside the unit Safet f you experience problems during installation consult your Kenwood dealer f the unit fails to operate properly press the Reset button The unit returns to factory settings when the Reset button is pressed If the unit still fails to operate properly after the Reset button has been pressed contact your local KENWOOD dealer for assistance Pre
8. button Adjustment Item Display Range Bass level Bas BAS 8 8 Middle level Mid MID 8 8 Treble level Tre TRE 8 8 Balance Bal BAL Left 15 Right 15 Fader Volume offset Rear 15 Front 15 V OFF 8 0 ED Volume offset Each source s volume can be set as a difference from the basic volume 5 Exit Audio Control mode Press the AUD button General features The frequency is displayed during Program Service name 5 i reception KDC 5020R only Fine tuning so that the System O value is optimal when setting Press the DISP button for at least 1 second the speaker type Speaker Setting The frequency for the RDS station will be displayed for 5 1 Enter Standby seconds instead of the Program Service name Press the SRC button In CD amp External disc source Select the ALL OFF display KDC MPV7020 6020 2 Enter Speaker Setting mode Information Display Press the Q button Track number 3 Select the Speaker type Disc name DNPS Press the kea or gt gt button Disc title In External disc source or D TITLE Each time the button is pressed the setting switches as shown KDC MPV7020 internal CD source below Track title In External disc source or T TITLE Speaker type Display KDC MPV7020 internal CD source OFF SP OFF Track number amp Track Time For 5 amp 4 in speaker SP 5 4 Cl
9. There s no CD inserted t Set the media you want to listen to If there s no media in this unit you can t switch to each source The Disc changer isn t connected Connect the Disc changer If the Disc changer isn t connected to it s input terminal You can t switch to an external disc source No sound can be heard or the volume is low The fader or balance settings are set all the way to one side ts Center the fader and balance settings V The input output wires or wiring harness are connected incorrectly t Reconnect the input output wires or the wiring harness correctly See the section on Connecting Wires to Terminals The values of Volume offset are low ts Increase the values of Volume offset page 9 The memory is erased when the ignition is turned OFF The battery wire has not been connected to the proper terminal i Connect the wire correctly referring to the section on Connecting Wires to Terminals The sound quality is poor or distorted One of the speaker wires is being pinched by a screw in the car ts Check the speaker wiring The speakers are not wired correctly Reconnect the speaker wires so that each output terminal is connected to a different speaker v The ignition and battery wire are incorrectly connected i Connect the wire correctly referring to the section on Connecting Wires to Terminals There s no loudness effect
10. of the bulletin Alarm When an emergency transmission announcing disasters etc is sent all current functions are interrupted to allow the warning to be received About CDs Handling CDs Don t touch the recording surface of the CD CD R and CD RW are easier to damage than a normal music CD Use a CD R or a CD RW after reading the caution items on the package etc Don t stick tape etc on the CD Also don t use a CD with tape stuck on it When using a new CD If the CD center hole or outside rim has burrs use it after removing them with a ball pen etc CD accessories Don t use disc type accessories CD cleaning Clean from the center of the disc and move outward Removing CDs When removing CDs from this unit pull them out horizontally CDs that can t be used CDs that aren t round can t be used CDs with coloring on the recording surface or that are dirty can t be used Don t use CDs without disc mark A CD R or CD RW that hasn t been finalized can t be played For the finalization process refer to your CD R CD RW writing software and your CD R CD RW recorder instruction manual CD storage Don t place them in direct sunlight On the seat or dashboard etc and where the temperature is high Store CDs in their cases zB Notes on playing MP3 This unit can play MP3 MPEG1 2 2 5 Audio Layer 3 Note however that the MP3 recording media and form
11. you re listening to Press the REP button Each time the button is pressed the Repeat Play switches as shown below Repeat play Display Track Repeat In CD MD REP ON T REP ON In MP3 REP ON Album Repeat In Disc Changer D REP ON In MP3 media F REP ON OFF REP OFF Playing the first part of each song on the disc or MP3 folder you are listening to and searching for the song you want to listen to 1 Start Track Scan Press the SCAN button Scan ON SCAN ON SCN is displayed 2 Release it when the song you want to listen to is played Press the SCAN button Random Play Play all the songs on the disc or MP3 folder in random order Press the RDM button Each time the button is pressed Random Play turns ON or OFF When it s ON ON is displayed When the gt gt button is pressed the next song select starts Magazine Random Play Function of disc changer Play the songs on all the discs in the disc changer in random order Press the M RDM button 3 Decide the folder to play Each time the button is pressed the Magazine Random Play turns Press the gt I button ON or OFF The Album Select mode releases and the MP3 in the folder When it s ON MRDM ON is displayed being displayed is played When the gt gt button is pressed the next song select starts ED The methods for moving to other folders in the album select mode are different from those in t
12. gt lt In FM reception gt Network sending PTY code for news bulletin i SM Temporarily have reception switched from stereo to mono to When the News Bulletin Interrupt function is ON it switches to an j FM station reduce multi path noise when listening to the FM station Display Setting CRSC ON The CRSC is ON CRSC OFF The CRSC is OFF o Strong electrical fields such as from power lines may cause unstable sound quality when CRSC is turned ON In such a situation turn it OFF Function of the KDC 5020R AF Alternative Frequency When poor reception is experienced automatically switch to another frequency broadcasting the same program in the same RDS network with better reception Display Setting AF ON The AF function is ON The AF function is OFF AF OFF When the AF function is ON the RDS indicator is ON ED When no other stations with stronger reception are available for the same program in the RDS network you may hear the incoming broadcast in bits and snatches Turn OFF the AF function in such a case Function of the KDC 5020R Restricting RDS Region Region Restrict Function You can choose whether or not to restrict the RDS channels received with the AF function for a particular network to a specific region Display Setting REG ON The Region Restrict Function is ON The Region Restrict Function is OFF REG OFF So
13. o the car chassis ground you may cause a short circuit that in urn may start a fire Always connect those wires to the power source running through the fuse box ACAUTION f your car s ignition does not have an ACC position connect the ignition wires to a power source that can be turned on and off with the ignition key If you connect the ignition wire to a power Source with a constant voltage supply as with battery wires the battery may die f the console has a lid make sure to install the unit so that the faceplate will not hit the lid when closing and opening f the fuse blows first make sure the wires aren t touching to cause a short circuit then replace the old fuse with one with the same rating nsulate unconnected wires with vinyl tape or other similar material To prevent a short circuit do not remove the caps on the ends of the unconnected wires or the terminals Connect the speaker wires correctly to the terminals to which they correspond The unit may be damaged or fail to work if you share the wires or ground them to any metal part in the car When only two speakers are being connected to the system connect the connectors either to both the front output terminals or to both the rear output terminals do not mix front and rear For example if you connect the connector of the left speaker to a front output terminal do not connect the connector to a rear output terminal After the unit is installed c
14. off Applying spray cleaner directly to the unit may affect its mechanical parts Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters Cleaning the CD Slot As dust tends to accumulate in the CD slot clean it every once in a while Your CDs can get scratched if you put them in a dusty CD slot About RDS RDS Radio Data System When listening to an RDS station the programme service name of the station is displayed advising you quickly which station is being received RDS Radio Data System stations also transmit frequency data for the same station When you are making long trips this function automatically alternative switches to the particular frequency with the best reception for the particular network of stations that you want to listen to The data is automatically stored allowing you to switch quickly to another RDS stations broadcasting the same programme that has better reception These include stations stored in the station preset memory that you often listen to Enhanced Other Network Stations that offer Enhanced Other Network also transmit information about other RDS stations that have traffic information When you are tuned to a station that is not transmitting traffic information but another RDS station starts transmitting a traffic bulletin the tuner automatically switches to the other station for the duration
15. pressed it pauses and plays Disc 10 is displayed as 0 The functions that can be used and the information that can be displayed will differ depending on the external disc players being connected Fast Forwarding and Reversing Fast Forwarding Hold down on the gt button Release your finger to play the disc at that point Reversing Hold down on the I lt button Release your finger to play the disc at that point Selecting the song you want to hear Searching for a song on the disc or in the MP3 folder Press the 4 or gt gt button Album Search Selecting the disc set in the Disc changer or the folder recorded on the MP3 media Press the FM or AM button 94 CD MP3 External disc control features Direct Track Search Function of remote Doing Track Search by entering the track number 1 Enter the track number Press the number buttons on the remote 2 Do Track Search Press the kea or gt gt button Canceling Direct Track Search Press the gt I1 button Direct Album Search Function of disc changers with remote Doing Disc Search by entering the disc number 1 Enter the disc number Press the number buttons on the remote 2 Do Album Search Press the DISC or DISC button Canceling Direct Album Search Press the gt H button Input to select disc 10 Track Album Repeat Replaying the song disc in the Disc changer or MP3 folder
16. such a medium may produce loud noise to damage the speakers Do no attempt to play a medium containing a non MP3 file with the MP3 extension The unit mistakes non MP3 files for MP3 data as long as they have the MP3 extension Do not attempt to play a medium containing non MP3 playing order When selected for play Album Search Track Search or for Album Select files and folders are accessed in the order in which they were written by the CD writer Because of this the order in which they are expected to be played may not match the order in which they are actually played You may be able to set the order in which MP3 are to be played by writing them onto a medium such as a CD R with their file names beginning with play sequence numbers such as 01 to 99 depending on your CD writer For example a medium with the following folder file hierarchy is subject to Album Search Track Search or Album Select as shown below Example of a medium s folder file hierarchy O C I 6 26 26 L 26 I de Folder lL File L8 Root Level 1 Level 3 Level 2 Level 4 When a Track Search is executed with file being played Current Operation of the button file number 4 Button gt gt Button 2 Beginning of file DOr JO When an Album Search is executed with file being played
17. the ID tag version1 x Record in conformity with the ID 3 tag version1 x Can t enter Album Select mode There s no folder recorded in the media ts Use a media with levels The songs in the selected folder aren t played in Album Select mode v There are MP3 in the selected folder ts Make sure there s recorded content in the MP3 media The MP3 track album search takes time Many tracks are recorded on the media t When the media directory is complex the track album search can take time The MP3 related text isn t displayed correctly A character is entered that this unit can t display ts For the characters that can be used for text entry refer to Notes on playing MP3 gt page 6 The MP3 track time isn t displayed correctly t There are times when it isn t displayed correctly according to the MP3 recording conditions If the following situations consult your nearest service center Even though the disc changer is connected the Disc Changer source is not ON with AUX showing in the display during the Changer Mode Even though no device KCA S210A CA C1AX KDC CPS87 KDC CX87 KDC CPS85 KDC CX85 KDC CPS82 or KDC CX82 is connected the Auxiliary input is entered when switching modes Troubleshooting Guide The messages shown below display your systems condition EJECT No disc magazine has been loaded in the changer The disc ma
18. wire yellow o the car chassis ground you may cause a short circuit that in urn may start a fire Always connect those wires to the power source running through the fuse box ACAUTION f your car s ignition does not have an ACC position connect the ignition wires to a power source that can be turned on and off with the ignition key If you connect the ignition wire to a power Source with a constant voltage supply as with battery wires the battery may die f the console has a lid make sure to install the unit so that the faceplate will not hit the lid when closing and opening f the fuse blows first make sure the wires aren t touching to cause a short circuit then replace the old fuse with one with the same rating nsulate unconnected wires with vinyl tape or other similar material To prevent a short circuit do not remove the caps on the ends of the unconnected wires or the terminals Connect the speaker wires correctly to the terminals to which they correspond The unit may be damaged or fail to work if you share the wires or ground them to any metal part in the car When only two speakers are being connected to the system connect the connectors either to both the front output terminals or to both the rear output terminals do not mix front and rear For example if you connect the connector of the left speaker to a front output terminal do not connect the connector to a rear output terminal After the unit
19. 20 5020R registered and Name Set mode closes Memory numbers Disc Naming can t be done during CD text or clock display EM 32 stations 2 Enter name set mode AM 16 stations Press the NAME button for at least 2 seconds Internal CD player 30 KDC MPV7020 6020 NAME SET is displayed 10 KDC 5020 5020R discs External CD changer player Varies according to the CD changer 3 Move the cursor to the enter character position player Refer to the CD changer player manual Press the kea or gt button The title of station CD can be changed by the same operation 4 Select the character type KDC MPV7020 6020 only RESTE Press the gt 11 button Each time the button is pressed the character type switches as Function of the KDC 5020R shown below Charactertype The audio system automatically mutes when a call comes Alphabet upper case Alphabet lower case When a call comes In Numbers and symbols CALL is displayed Special characters Accent characters The audio system pauses Listening to the audio during a call Press the SRC button The CALL display disappears and the audio system comes back 5 Select the characters Press the FM or AM button o Characters can be entered by using a remote with a number ON buttons Example If DANCE is entered When the call ends Character Button Times pressed Hang up the phone D 183 1 The CALL display disappears and the audio system co
20. 4 Exit Clock adjustment mode Press the MENU button Function of the KDC 5020 KDC 5020R Switching Graphic Display Function of the KDC 5020R Setting the graphic part display ON OFF Synchronize Clock Display Setting Synchronizing the RDS station time data and this unit s clock GRPH ON The graphic part is displayed Displa Settin GRPH OFF The graphic part isn t displayed SYNC ON Synchronizes the time SYNC OFF Adjust the time manually It takes 3 to 4 minutes to synchronize the clock Function of the KDC MPV7020 KDC 6020 Switching Display Type Setting the Display type Display Setting DSI Disabled System Indicator DisplayD Demonstration A red indicator will blink on the unit after the faceplate is DisplayA Circle Display is play time DisplayB Circle Display is clock DisplayC Silent display type Function of the KDC MPV7020 IIlumination Color Setting You can set the display to a desired color 1 Select Illumination Color Setting Mode Press the FM or AM button Select the COL display 2 The color continues to change gradually Continue pressing the lt or gt gt button Release your finger at the color you want Quick call up the preset color Press the 1 4 button Button Color 1 Silky White 2 Red 3 Blue 4 Blue Green Selecting the Color mode Press the 6 button Each time the button is pressed the Color mode swit
21. DNPP mode Press the DNPP button on the remote Returning to the top level Press the 3 button 93 Menu system SRC FM MENU gt gt N A n JIN so DE My GA S 007 MI oe ZINA 4o if AN AMNS ze Ja Menu display KDC 5020 5020R NEWS indicator RDS indicator KDC 5020R KDC 5020R Menu display Setting during operation beep sound etc functions The Menu system basic operation method is explained here The reference for the Menu items and their setting content is after this operation explanation 1 Enter Menu mode Press the MENU button for at least 1 second MENU is displayed 2 Select the menu item Press the FM or AM button Example When you want to set the beep sound select the BEEP display 3 Set the menu item Press the kea or gt gt button Example When is selected each time the button is pressed it switches Beep ON BEEP ON OFF Select 1 of them as the setting You can continue by returning to step 2 and setting other items 4 Exit Menu mode Press the MENU button E gt When other items that are applicable to the basic operation method above are displayed afterwards their setting content chart is entered Normally the uppermost setting in the chart is the original setting Also the explan
22. Entry closes E gt When the AF Function page 29 is ON only RDS stations are put in the memory RDS features Function of the KDC 5020R Traffic Information Switching to traffic information automatically when a traffic bulletin starts even when you aren t listening to the radio Press the TI button Each time the button is pressed the Traffic Information function turns ON or OFF When it s ON indicator is ON When a traffic information station isn t being received the indicator blinks When a traffic bulletin starts TRAFFIC is displayed it and it switches to traffic information During reception of a AM station when the Traffic Information function is turned ON it switches to a FM station During reception of traffic information the adjusted volume is automatically remembered and the next time it switches to traffic information it s automatically the remembered volume Receiving other traffic information stations Press the 4 or gt gt button ED Traffic information station switching can be done when listening to PTY indicator indicator the radio Radio Text Scroll Scrolling the displayed radio text Press the DISP button for at least 1 second 15 RDS features Function of the KDC 5020R Program Type 21 Social Affa
23. KENWOOD KDC MPV7020 MANUAL KDC 6020 KDC 5020 KDC 5020R DIGITAL AUDIO Contents Safety precautions About CDs Notes on playing MP3 General features Power Selecting the Source Volume Attenuator Loudness System O Audio Control Speaker Setting Switching Display Station Disc Naming SNPS DNPS TEL Mute Auxiliary Input Display Setting Non fading Output Theft Deterrent Faceplate Tuner features KDC 5020R 13 Tuning Direct Access Tuning Station Preset Memory Auto Memory Entry Preset Tuning RDS features Traffic Information Radio Text Scroll PTY Program Type Program Type preset Changing Language for PTY Function Tuner features KDC MPV7020 6020 5020 17 Tuning Mode Tuning Direct Access Tuning Station Preset Memory Auto Memory Entry Preset Tuning Frequency Step Setting CD MP3 External disc control features Playing CD amp MP3 Playing External Disc Fast Forwarding and Reversing Track Search Album Search Direct Track Search Direct Album Search Track Album Repeat Track Scan Random Play Magazine Random Play Album Select Text Title Scroll DNPP Disc Name Preset Play Menu system Menu System Security Code Touch Sensor Tone Manual Clock Adjustment Synchronize Clock DSI Disabled System Indicator Selectable Illumination Switching Display Type Illumination Color Setting Switching Graphic Display Contrast Adjustment Dimmer Switching preout News Bulleti
24. ation for items that aren t applicable lt Manual Clock Adjustment gt etc are entered step by step Security Code Because authorization by the Security Code is required when it s removed from the vehicle personalizing this unit is by using the Security Code is a help in preventing theft 94 E gt When the Security Code function is activated it can t be released Note your Security Code is the 4 digit number entered in your Car Audio Passport in this package Enter Standby Press the SRC button Select the ALL OFF display Enter Menu mode Press the MENU button for at least 1 second When is displayed Security SECURITY is displayed Enter Security Code mode Press the lt lt gt gt button for at least 1 second When ENTER is displayed CODE is displayed Select the digits to enter Press the kea or gt gt button Select the Security Code numbers Press the FM or AM button Repeat steps 4 and 5 and complete the Security Code Confirm the Security Code Press the gt gt I button for at least 3 seconds When RE ENTER is displayed CODE is displayed Do the step 4 through 7 step operation and reenter the security code APPROVED is displayed The Security Code function activates ED If you enter a Code different from your Security Code you have to start over from step 4 APPROVED is displayed The unit can be used e If an incorrect code is
25. ats acceptable are limited When writing pay attention to the following restrictions Acceptable media The MP3 recording media acceptable to this unit are CD ROM CD R and CD RW When using CD RW do full format not quick format to prevent malfunction Acceptable medium formats The following formats are available for the media used in this unit The maximum number of characters used for file name including the delimiter and three character extension are indicated in parentheses ISO 9660 Level 1 12 characters e ISO 9660 Level 2 31 characters Joliet 64 characters Romeo 128 characters Up to 200 characters can be displayed in the long file name format For a list of available characters see the instruction manual of the writing software and the section Entering file and folder names below The media reproducible on this unit has the following limitations Maximum number of directory levels 8 Maximum number of files per folder 255 Maximum number of characters for folder name 64 Maximum number of folders 50 MP3 written in the formats other than the above may not be successfully played and their file names or folder names are not properly displayed Settings for your encoder and CD writer When you use your CD writer to record up to the maximum disc capacity disable additional writing For recording on an empty disc up to the maximum capacity at once check Disc at Once
26. ches as shown below Display Color mode Scan The color changes in sequence SRC The color changes according to the selected source Time The color changes every 6 hours Keeps the presently set color Blue fine adjustment 1 Press the 3 button for at least 2 seconds 2 Press the 444 or gt gt button When the blue fine adjustment is completed press the 3 button The set color memory Press the 5 button for at least 2 seconds When the setting in the memory is called up press the 5 button The blue fine adjustment setting cannot be stored in memory Function of the KDC MPV7020 KDC 6020 Contrast Adjustment Adjusting the display contrast Display and Setting CONT 0 CONT 5 Original setting CONT 10 Function of the KDC MPV7020 KDC 6020 Dimming this unit s display automatically when the vehicle light switch is turned ON Display Setting DIM ON The display dims DIM OFF The display doesn t dim Menu system Function of the KDC MPV7020 KDC 6020 Function of the KDC 5020R Switching preout Local Seek lt In Tuner mode gt Switching the preout between the rear and non fading In non Only stations whose reception is good are searched for in auto fading it outputs without effect from the fader control seek tuning Display Setting Display Setting SWPRE Rear preout LO S OFF The local seek function i
27. ct Access Tuning A station that can t be received is being entered te Enter a station that can be received You re trying to enter a frequency with 0 01 MHz unit i What can be designated in the FM band is to 0 1 MHz It isn t the set Traffic information sound volume The set sound volume is less than the tuner sound volume ts f the tuner sound volume is louder than the set sound volume the tuner sound volume is used Disc source AUX is displayed without achieving External disc control mode O N switch is set O side tx Set the switch to N side v Unsupported disc changer is connected t Connect the supported disc changer page 3 The specified disc does not play but another one plays instead v The specified CD is quite dirty ts Clean the CD v The CD is upside down ts Load the CD with the labeled side up v The disc is loaded in a different slot from that specified ts Eject the disc magazine and check the number for the specified disc v The disc is severely scratched ts Try another disc instead The specified track will not play v Random play or magazine random play has been selected te Turn off random play or magazine random play Track repeat disc repeat track scan random play and magazine random play start by themselves The setting is not canceled t The settings for these functions remain on until the setting to off or the disc eje
28. cted even if the power is turned off or the source changed Cannot play CD R or CD RW Finalization processing is not being conducted for CD R CD RW ts Conduct finalization processing with CD recorder Anon compatible CD changer is being used to play the CD R CD RW t Use a CD changer compatible with CD R CD RW to play ACD ejects as soon as it is loaded v The CD is upside down ts Load the CD with the labeled side up The CD is quite dirty t Clean the CD referring to the section on CD cleaning page 5 Can t remove disc v cause is that more than 10 minutes has elapsed since the vehicle ACC switch was turned OFF The disc can only be removed within 10 minutes of the ACC switch being turned OFF If more than 10 minutes has elapsed turn the ACC switch ON again and press the Eject button 40 The disc won t insert There s already another disc inserted Press the 4 button and remove the disc Direct Track Search and Direct Album Search can t be done Another function is ON t Turn Random Play or other functions OFF Track Search can t be done For the albums first or last song t For each album Track Search can t be done in the backward direction for the first song or in the forward direction for the last song MP3 source Cannot play an MP3 Not conforming to ISO 9660 Level 1 2 Joliet and Romeo t Use medium con
29. e it contains glass parts Do not touch the liquid crystal fluid if the LCD is damaged or broken due to shock The liquid crystal fluid may be dangerous to your health or even fatal If the liquid crystal fluid from the LCD contacts your body or clothing wash it off with soap immediately ACAUTION To prevent damage to the machine take the following precautions Make sure to ground the unit to a negative 12V DC power supply Do not open the top or bottom covers of the unit Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity Also avoid places with too much dust or the possibility of water splashing Do not subject the faceplate to excessive shock as it is a piece of precision equipment When replacing a fuse only use a new one with the prescribed rating Using a fuse with he wrong rating may cause your unit to malfunction To prevent a short circuit when replacing a use first disconnect the wiring harness Do not place any object between the aceplate and the unit Do not use your own screws Use only the screws provided If you use the wrong Screws you could damage the unit Do not apply excessive force to the open aceplate or place objects on it Doing so will cause damage or breakdown Do Not Load 3 in CDs in the CD slot If you try to load a 3 in CD with its adapter into the unit the adapter might separate from the CD and damage the unit
30. ed to the constant power supply Unit Vehicle Ignition cable Red 2 8 b 7 Pin Red gt 002 5 4 Pin Yellow Battery cable Yellow Connecting the ISO Connector see p 23 E gt When the connection is made as in 3 above the unit s power will not be linked to the ignition key For that reason always make sure to turn off the unit s power when the ignition is turned off To link the unit s power to the ignition connect the ignition cable ACC red to a power source that can be turned on and off with the ignition key Installation W installation Firewall or metal support Screw 8 commercially available Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place Metal mounting strap commercially available Self tapping screw commercially available ED Make sure that the unit is installed securely in place If the unit is unstable it may malfunction for example the sound may skip W Installing in Japanese Made Cars 1 Refer to the section Removing the hard rubber frame page 38 and then remove the hard rubber frame 2 Align the holes in the unit two locations on each side with the vehicle mounting bracket and secure the unit with the accessory screws LE MAX E 8mm 5mm T Toyota cars N Nissan cars Accessory for Nissan car
31. emperature inside the automatic disc changer exceeds 60 C 140 F stopping all operation x Cool down the unit by opening the windows or turning on the air conditioner As the temperature falls below 60 140 F the disc will start playing again Attempted to display DNPS during the CD play having no disc names preset Attempted to display the disc title or track title while the MD having no MD title is being played e Attempted to display the disc text or track text while the CD having no CD text is being played Attempted to display text during reception of the station that isn t sending text data Attempted to display the ID3 tag while the MP3 having no ID3 tag is being played Radio text data is being received Discs are being exchanged in the Disc changer After setting it in the Disc Changer DNPP was done without having it been played at least 1 time The CD player section is not operating properly lt gt Reinsert the CD If the CD cannot be ejected or the display continues to flash even when the CD has been properly reinserted please switch off the power and consult your nearest service center Specifications Specifications subject to change without notice FM tuner section KDC MPV7020 6020 5020 Frequency range 50 kHz space 87 5 MHz 108 0 MHz 200 kHz space 87 9 MHz 107 9 MHz Usable sensitivity S N 30dB 9 0 8 uV 75 Qu
32. er Program Type 12 Pop Music POP M 4 Exit PTY mode 3 Rock Music ROCK Press the PTY button 4 Easy Listening Music EASY M 15 Light Classical LIGHT M 6 Serious Classical CLASSICS 7 Other Music OTHER M 18 Weather WEATHER Program Typo preset 19 Finance FINANCE Putting the Program Type in the Preset button memory and 20 Children s programs CHILDREN calling it up quickly 216 Presetting the Program Type 1 Select the Program Type to preset Refer to PTY Program Type page 16 2 Preset the Program Type Press the 41 46 button for at least 2 seconds Calling up the preset Program Type 1 Enter PTY mode Refer to PTY Program Type page 16 2 Call up the Program Type Press the 1 46 button Changing Language for PTY Function Selecting the Program Type display language 1 2 3 Enter PTY mode Refer to lt PTY Program Type gt page 16 Enter Changing Language mode Press the DISP button Select the language Press the FM or AM button Each time the button is pressed the language switches as shown below Language Display English ENGLISH French FRENCH Swedish SWEDISH German GERMAN Exit Changing Language mode Press the DISP button Tuner features Function of the KDC MPV7020 KDC 6020 KDC 5020 SRC FM MENU gt gt KDC MPV7020 6020 ST indicator Preset station number
33. forming to ISO 9660 Level 1 2 Joliet and Romeo v The MP3 has no or invalid track name extension ts Add the MP3 extension to the track name v The media is scratched or dirty t Clean the media referring to the section on CD cleaning page 5 Noise or no sound generated when an MP3 is played The track has the track name extension while it is not an ts Do not use the MP3 extension in non MP3 Takes time before the unit starts playing MP3 medium contains many albums tracks and hierarchical levels ts The unit checks all tracks on the loaded medium first If the medium has many tracks recorded it may take a long time for the unit before it starts playing MP3 Fails to play MP3 in the intended order tracks were not written by the CD writer in the order in which you wanted them to be played ts Depending on the CD writer you may be able to set the order in which MP3 tracks are to be played by writing them onto a medium with their track names beginning with play sequence numbers such as 01 to 99 The sound skips when an MP3 is being played The media is scratched or dirty Clean the media referring to the section on CD cleaning page 5 v recording condition is bad t Record the media again or use another media Can t display the ID3 tag information correctly V Record is not made in conformity with
34. g gt page 13 18 mode 11 button KDC 5020R only Enters and cancels the PTY Program Type page 16 mode In Disc source gt gt buttons Doing track forward and backward DISC DISC buttons Doing album forward and backward 11 button Each time the button is pressed the song pauses and plays DNPP OK button Enters and cancels the DNPP Disc Name Preset Play page 23 mode 40 49 buttons When in Direct Track Search page 22 and Direct Album Search page 22 enter the track disc number Lug Accessories KDC MPV7020 6020 5020 External view Number of items External view Number of items The use of any accessories except for those provided might result in damage to the unit Make sure only to use the accessories shipped with the unit as shown above Installation Procedure KDC MPV7020 6020 5020 1 To prevent a short circuit remove the key from the ignition and disconnect the battery 2 Make the proper input and output wire connections for each unit Connect the speaker wires of the wiring harness Connect the wiring harness wires in the following order ground battery ignition Connect the wiring harness connector to the unit Install the unit in your car Reconnect the battery Press the reset button Pw AWARNING If you connect the ignition wire red and the battery wire yellow
35. gazine is not completely loaded Load the disc magazine properly No CD in the unit Insert the CD No Disc NO DISC TOC ER E 05 BLANK NO TRACK E 15 NO PANEL E 77 No disc has been loaded in the disc magazine Load a disc into the disc magazine No disc has been loaded in the disc magazine Load a disc into the disc magazine The CD is quite dirty The CD is upside down The CD is scratched a lot Clean the CD and load it correctly The CD is upside down Load the CD correctly Nothing has been recorded on the MD No tracks are recorded on the MD although it has a title Media was played that doesn t have data recorded that the unit can play Use media that has data recorded that the unit can play The faceplate of the slave unit being connected to this unit has been removed Replace it The unit is malfunctioning for some reason Press the reset button on the unit If the E 77 code does not disappear consult your nearest Service center MECHA ER HOLD ER NO NAME NO TITLE NO TEXT WAITING LOAD NO ACCESS IN Blink 42 Something is wrong with the disc magazine Or the unit is malfunctioning for some reason Check the disc magazine And then press the reset button on the unit If the MECHA ER code does not disappear consult your nearest service center The protective circuit in the unit activates when the t
36. he album search mode See lt Notes on playing MP3 gt page 6 for details Canceling the Album Select mode Function of the KDC MPV7020 KDC 6020 Press the 5 button Album Select Function of MP3 Quickly selecting the folder you want to listen to Text Title Scroll 1 Enter Album Select mode Press the 5 button Scrolling the displayed CD text MP3 text or MD title SELECT is displayed Press the DISP button for at least 1 second During Select mode the folder information is displayed as shown below DNPP Disc Name Preset Play ET HAM Function of disc changers with remote Selecting the CD displayed in the DNPS of the CDs set in the Disc changer V V i 8 gr 7777 oem Folder name display 1 Enter DNPP d Displays the current folder name ond d Press the DNPP button on the remote 2 Select the folder level When DNPP is displayed the DNPS display in order Press the FM or AM button With the FM button you move 1 level down and with the AM button 1 level up Forward Reverse display Press the DISC or DISC button 2 When the disc you want is displayed Press the OK button on the remote The disc being displayed is played Selecting a folder in the same level Press the lt or gt gt button With the lt lt button you move to the previous folder and with the gt button to the next folder Canceling the
37. he band Press the FM or AM button 1 Select the band Each time the FM button is pressed it switches between the Press the FM or AM button EM Danes 2 Select the frequency to put in the memory 3 Tune up or down band Press the 44 or gt gt button Press the kea or gt gt button Station Preset Memory Putting the station in the memory 3 Put the frequency in the memory During reception of stereo stations the ST indicator is ON Press the 1 6 button for at least 2 seconds The preset number display blinks 1 time On each band 1 station can be put in the memory on each 1 6 button Function of the KDC MPV7020 KDC 6020 Auto Memory Entry Putting a station with good reception in the memory automatically 1 Select the band for Auto Memory Entry Press the FM or AM button 2 Enter Menu mode Press the MENU button for at least 1 second MENU is displayed 3 Select the Auto Memory Entry mode Press the FM or AM button Select the display 4 Open Auto Memory Entry Press the ke or gt i button for at least 2 seconds When 6 stations that can be received are put in the memory Auto Memory Entry closes Function of the KDC 5020 Auto Memory Entry Putting stations with good reception in the memory automatically 1 Select the band for Auto Memory Entry Press the FM or AM button 2 Open Auto Memory Entry Press the AME butto
38. heck whether the brake lamps blinkers wipers etc on the car are working properly Mount the unit so that the mounting angle is 30 or less 32 Connecting Wires to Terminals KDC MPV7020 6020 5020 Rear right output Red Non fading right output Red KDC MPV7020 6020 only Rear left output White Non fading left output White KDC MPV7020 6020 only AUX right input Red KDC MPV7020 6020 only lins AUX left input White KDC MPV7020 6020 only To KENWOOD disc changer Front tight output Red D DAB control input KPA SD100 KPA HD100 KPA SS100 ED To connect these leads refer to the relevant instruction manuals Front left output White FM AM antenna inpu If no connections are made do not let the wire come out from the tab Fuse 10A Wiring harness When using the optional power amplifier V Accessory connect to its power control terminal Power control wire Blue White Depending on what antenna you are using connect either to the control terminal of the motor antenna to the power terminal for the booster amplifier of the Mw Motor antenna control wire Blue film type antenna White Black To front left To car light control switch
39. ieting Sensitivity S N 50dB 15 2dBf 1 6 uV 75 Q Frequency response x3 30 Hz 15 kHz Signal to Noise rat Selectivity 400 kHz Stereo separation io MONO AL RIA essen boas AM tuner section KDC MPV7020 6020 5020 Frequency range 9 kHz space 531 kHz 1611 kHz 10 kHz space 530 kHz 1700 kHz Usable sensitivity S N 204 28 25 uV FM tuner section KDC 5020R Frequency range 50 kHz space 87 5 MHz 108 0 MHz Usable sensitivity S N 26aB 0 7 uV 75 Q Quieting Sensitivity S N 46dB 1 6 uV 75 Frequency response 3 30 Hz 15 kHz Signal to Noise rat Selectivity DIN 400 kHz Stereo separation io K MW tuner section KDC 5020R Usable sensitivity Frequency range 9 kHz space 531 kHz 1611 kHz S N S 200B etre ee terret as 25 KDC 5020R LW tuner section Frequency range Usable sensitivity S N 20dB 45 CD player section Laser diod6G scs c rper GaAlAs 12780 nm Digital filter D A Times Over Sampling D A Converte e doce 1 B
40. ign the shaft on the unit with the depression on the KDC 5020 5020R faceplate This function doesn t work when CA C1AX is used Function of the KDC MPV7020 KDC 6020 Non fading Output Turning the Non fading output ON or OFF Press the NF button for at least 1 second 2 Push the faceplate in until it clicks Each time the button is pressed Non fading output switches ON The faceplate is locked in place allowing you to use the unit or OFF When it s ON NF is displayed Tuner features Function of the KDC 5020R SRC FM MENU gt gt Selecting the station 1 Select tuner source Press the SRC button Select the TUNER display 2 Select the band Press the FM or AM button Each time the FM button is pressed it switches between the FM1 FM2 and FM3 bands 3 Tune up or down band Press the 4 or gt gt button During reception of stereo stations the ST indicator is ON Direct Access Tuning Function of remote Entering the frequency and tuning ST indicator 1 Select the band Press the FM or AM button 2 Enter Direct Access Tuning mode Press the DIRECT button on the remote js displayed 3 Enter the frequency Band display Frequency display Preset station number Press the number buttons on the remote Example Desired frequency Press button 92 1 MHz FM 0 9 2 1 810 kHz AM 0 8 1 0 Cancel
41. ing Direct Access Tuning Press the DIRECT button on the remote 13 Tuner features Function of the KDC 5020R When Auto Memory Entry is done in the FM2 band the RDS stations preset in the FM1 band aren t put in the memory Station Preset Memory Putting the station in the memory Likewise when it is done in the FM3 band RDS stations preset in FM1 or FM2 aren t put in the memory 1 Select the band Press the FM or AM button 2 Select the frequency to put in the memory Press the I lt or gt gt button Preset Tuning Calling up the stations in the memory 3 Put the frequency in the memory Press the 1 6 button for at least 2 seconds 1 Select the band The preset number display blinks 1 time P ress the FM AM button On each band 1 station can be put in the memory on each 1 FM AM 6 button 2 Call up the station Press the 1 6 button Auto Memory Entry Putting a station with good reception in the memory automatically 1 Select the band for Auto Memory Entry Press the FM or AM button 2 Enter Menu mode Press the MENU button for at least 1 second is displayed 3 Select the Auto Memory Entry mode Press the FM or AM button Select the A MEMORY display 4 Open Auto Memory Entry Press the ke or gt gt button for at least 2 seconds When 6 stations that can be received are put in the memory Auto Memory
42. ing Volume Press the v button Attenuator Turning the volume down quickly Press the ATT button Each time the button is pressed the Attenuator turns ON or OFF When it s ON the indicator blinks Compensating for low and high tones during low volume Press the LOUD button for at least 1 second Each time the button is pressed for at least 1 second the Loudness turns ON or OFF When it s ON LOUD ON is displayed You can recall the best sound setting preset for different types of the music 1 Select the source to set Press the SRC button 2 Select the Sound type Press the O button Each time the button is pressed the sound setting switches Sound setting Display Flat Flat FLAT User memory User USER Rock Rock Pops Pops POPS Easy Easy EASY Top 40 Top40 TOP40 Jazz Jazz JAZZ User memory The values set on the Audio control page 9 Each setting value is changed with the Speaker setting page 10 First select the speaker type with the Speaker setting Audio Control 1 Select the source for adjustment Press the SRC button 2 Enter Audio Control mode Press the AUD button for at least 1 second 3 Select the Audio item for adjustment Press the FM or AM button Each time the button is pressed the items that can be adjusted Switch as shown below 4 Adjust the Audio item Press the 4 or gt gt
43. input WAITING is displayed and the input prohibited time shown below is generated After the input prohibited time lapses CODE is displayed and input can be done Number of times Input prohibited time the incorrect code was input 5 minutes 1 hour 24 hours IN Touch Sensor Tone Setting the operation check sound beep sound ON OFF Display Setting Beep ON BEEP Beep is heard Beep OFF BEEP OFF Beep canceled Press the Reset button and when it s removed from the battery power source 1 Turn the power ON 2 Do the step 4 through 7 step operation and reenter the security code 25 Menu system Manual Clock Adjustment removed warning potential thieves o This adjustment can be done when the Synchronize Clock page Display Setting 26 is set as OFF DSI ON LED flashes 1 Select Clock Adjustment mode DSI ORE LED OFF Press the FM or AM button Select the CLK ADJ display 2 Enter Clock Adjust mode Function of the KDC MPV7020 KDC 6020 KDC 5020R Selectable Illumination Press the 44 or gt gt button for at least 1 second The clock display blinks 3 Adjust the hours Selecting the button illumination color as green or red Press the FM or AM button Display Setting KEY GRN The illumination color is green Adjust the minutes KEY RED The illumination color is red Press the kea or gt gt button
44. irs SOCIAL 22 Religion RELIGION Selecting the Program Type and searching for a station 23 Phone PHONE IN 1 Enter PTY mode 24 Travel TRAVEL Press the PTY button 25 Leisure LEISURE During PTY mode the PTY indicator is ON 26 Jazz Music JAZZ 27 Country Music COUNTRY This function can t be used during a traffic bulletin or AM reception 28 National Music NATION M 2 Select the Program Type 23 ees Music OTT Press the FM or AM button 2 DERE DOCUMENT Each time the button is pressed the Program Type switches as shown below Speech and Music include the Program type shown below No Program Type Displa Music No 12 17 26 30 220 Spey Speech No 3 11 18 25 31 1 Speech SPEECH The Program Type can be put in the 1 6 button memory 2 Music MUSIC and called up quickly Refer to the lt Program Type preset gt page 3 News NEWS 16 4 Current Affairs AFFAIRS The display language can be changed Refer to Changing 5 Information INFO Language for PTY Function page 17 6 Sport SPORT 3 Search for the selected Program Type station v Education EDUCATE Press the kea or gt button 8 Drama DRAMA When you want to search for other stations press the ka a or 9 Culture CULTURE gt gt button again 0 Science SCIENCE ED When the selected Program Type isn t found NO PTY is displayed 11 Varied VARIED Select anoth
45. is installed check whether the brake lamps blinkers wipers etc on the car are working properly Mount the unit so that the mounting angle is 30 or less 34 Connecting Wires to Terminals KDC 5020R Rear right output Red Rear left output White Front right output Red Front left output White I EE Antenna Cord ISO FM AM antenna inpu Fuse 10A KENWOOD disc changer input E gt To connect the Disc changer consult your Disc changer manual Battery wire Yellow Ignition wire Red A 7 Pin Red ED 4 A 4 Pin Yellow Connector A Connector B H Wiring harness Accessory TEL mute wire Brown Power control Motor antenna control wire Blue White Connector Function Guide Pin Numbers for ISO Connectors Cable Colour Functions External Power Connector A 4 A 5 Caney 1 ANT CONT Yellow Blue White Red Black Purple Purple Black Gray Gray Black White White Black Green Green Black grounded when ei Battery Power Control Ignition ACC Earth Ground Connection Rear Right Rear Right Front Right Front Right Front Left Front Left Rear Left 4 Rear Left Connect to the terminal that is her the telephone rings o
46. it Spindle speed KDC MPV7020 1000 400 2times KDC 6020 5020 5020R Wow amp Frequency response x1 dB Total harmonic distortion 1 KHZ 0 01 96 Signal to Noise ratio 1 kHz KDC MPV7092U0 cie REAREA KDC 6020 5020 5020R Dynamic range Channel separation MP3 Decode KDC MPV7020 T M Compliant with MPEG 1 0 2 0 2 5 Audio Layer 3 eui 500 200 rpm CLV Below Measurable Limit Audio section Maximum OUTPUT POWEL sosionom Full Bandwidth Power at less than 196 THD Tone action teed 100 Hz 10 Middle i miresine 1 kHz 10 dB Ne 10 kHz 10 dB Preout level Load during disc play 1800 mV 10 kQ Preout 6000 General Operating voltage 11 16V allowable SAF KENWOOD
47. mes back ON A 2 1 General features Auxiliary Input Display Setting Selecting the display when this device is switched to Auxiliary The faceplate of the unit can be detached and taken with you Theft Deterrent Faceplate input source helping to deter theft 1 Select Auxiliary input source Press the SRC button Select the AUX display Removing the Faceplate 1 Press the Release button Drop open the faceplate 2 Enter Auxiliary input display setting mode Press the DISP button for at least 2 seconds The presently selected AUX Name is blinks 2 Drawing the faceplate to left side pull it to the front and remove it 3 Select the Auxiliary input display Press the kea or gt gt button Each time the button is pressed it switches through the below displays e AUX TV e VCP The faceplate i isi i i a a plate is a precision piece of equipment and can be GAME AN damaged by shocks or jolts For that reason keep the faceplate in PORTABLE its special storage case while detached DVD Do not expose the faceplate or its storage case to direct sunlight 4 Exit Auxiliary input display setting mode or excessive heat or humidity Also avoid places with too much Press the DISP button dust or the possibility of water splashing When operation stops for 10 seconds the name at that time is Reattaching the Faceplate selected and Auxiliary input display setting mode closes 1 Al
48. metimes stations the same network broadcast different programs or use different program service names Function of the KDC 5020R Auto TP Seek When the TI function is ON and poor reception conditions are experienced when listening to a traffic information station another traffic information station with better reception will be searched for automatically Display Setting ATPS ON he Auto TP Seek Function is ON ATPS he Auto TP Seek Function is OFF Function of the KDC 5020R Monaural Reception lt in reception gt Noise can be reduced when stereo broadcasts are received as monaural Display Setting MONO OFF The monaural reception is OFF The monaural reception is ON MONO ON 29 Menu system Basic Operations of remote Function of the KDC MPV7020 KDC 6020 KDC 5020 Setting the displayed text scroll Display Setting SCL AUTO Repeats scroll SCL MANU Scrolls when the display changes ED The text scrolled is shown below CD text Folder name File name Song title Artist name Album name MD title FM AM DISC DISC xcii Function of the KDC 5020R CJ C2 JC J 40 49 2 Setting the displayed text scroll JES Ce DIRECTION Display Setting rn oe SCL MANU Doesn t scroll 5 DNPP gt SCL AUTO Scrolls when the display changes ATT 2 The text
49. n for at least 2 seconds When 6 stations that can be received are put in the memory Auto Memory Entry closes Preset Tuning Calling up the stations in the memory 1 Select the band Press the FM or AM button 2 Call up the station Press the 1 6 button Frequency Step Setting Changing the tuning frequency step The original setting is FM band 50 kHz and AM band 9 kHz While pressing the 1 and 5 button press the Reset button The frequency step changes to FM band 200 kHz and AM band 10 kHz EX When the frequency step is switched the frequencies in the memory are deleted 19 CD MP3 External disc control features Release button Playing CD amp MP3 SRC FM H When there is no disc inserted 1 Drop open the faceplate Press the Release button 2 Insert a disc 3 Press the faceplate on the right side and return it to its former position AN When the faceplate has been dropped open it might interfere with the shift lever or something else If this happens pay MROM DISPehAUE AUTO GEM SCAN RDM REP 5 M RDM DISP 3 attention to safety and move the shift lever or take an appropriate action then operate the unit KDC MPV7020 8020 Do not use the unit with the faceplate in the open condition If it s IN indicator used in the open position dust can enter the inside part and cause damage The models that can play MP3 i
50. n with Timeout Setting Local Seek Tuning Mode Auto Memory Entry CRSC Clean Reception System Circuit AF Alternative Frequency Restricting RDS Region Region Restrict Function Auto TP Seek Monaural Reception Text Scroll Built in Auxiliary input Setting Basic Operations of remote Accessories KDC MPV7020 6020 5020 32 Installation Procedure KDC MPV7020 6020 5020 32 Connecting Wires to Terminals KDC MPV7020 6020 5020 33 Accessories KDC 5020R Installation Procedure KDC 5020R Connecting Wires to Terminals KDC 5020R Installation Troubleshooting Guide Specifications Safety precautions AWARNING To prevent injury or fire take the following precautions Insert the unit all the way in until it is fully locked in place Otherwise it may fall out of place when jolted When extending the ignition battery or ground wires make sure to use automotive grade wires or other wires with 0 75mm AWG18 or more to prevent wire deterioration and damage to the wire coating To prevent a short circuit never put or leave any metallic objects such as coins or metal tools inside the unit e f the unit starts to emit smoke or strange smells turn off the power immediately and consult your Kenwood dealer Make sure not to get your fingers caught between the faceplate and the unit Be careful not to drop the unit or subject it to strong shock The unit may break or crack becaus
51. ock For 6 amp 6x9 in speaker SP 6 9 6 KDC 5020 5020R For the OEM speaker SP Information Display 4 Exit Speaker Setting mode Track number amp Track Time Press the O button Disc name DNPS Disc title In External disc source D TITLE Switching Display Track title In External disc source TITLE Switching the information displayed Clock Press the DISP button In MP3 sonree Each time the button is pressed the display switches as shown Information Display below Track number In Tuner source Disc name DNPS Information Display Folder name FOL NAME Frequency KDC MPV7020 6020 5020 only File name FIL Station name KDC MPV7020 6020 5020 only SNPS Song title amp Artist name Program Service name or Frequency KDC 5020R only Album name amp Artist name ALBUM Radio text KDC 5020R only R TEXT Track Time Clock Clock 10 Station Disc Naming SNPS DNPS va 2 E 3 2 6 Repeat steps 3 through 5 and enter the name Attaching a title to a Station KDC MPV7020 6020 5020 only or CD 1 Receive play the station disc you want to attach a title to 7 Exit name set mode A title can t be attached to a MD Press the NAME button KDC MPV7020 6020 i When operation stops for 10 seconds the name at that time is isc Naming can t be done during CD text display d and N S da KDC 50
52. r during conversation Connect either to the power control terminal when using the optional power amplifier or to the antenna control terminal in the vehicle If no connections made do not the wire come out from the tab Connecting Wires to Terminals KDC 5020R AWARNING The pin arrangement for the ISO connectors depends on the type of vehicle you drive Make sure to make the proper connections to prevent damage to the unit The default connection for the wiring harness is described in 1 below If the ISO connector pins are set as described in 2 or 3 make the connection as illustrated 1 Default setting The A 7 pin red of the vehicle s ISO connector is linked with the ignition and the A 4 pin yellow is connected to the constant power supply Unit Vehicle Ignition cable Red 2 8 a A 7 Pin Red Battery cable Yellow 2 65 gt A 4 Pin Yellow N The A 7 pin red of the vehicle s ISO connector is connected to the constant power supply and the A 4 pin yellow is linked to the ignition Unit Vehicle Ignition cable Red kx A 7 Pin Red Battery cable Yellow gt ES A 4 Pin Yellow The 4 pin yellow of the vehicle s ISO connector is not connected to anything while the A 7 pin red is connected to the constant power supply or both the A 7 red and A 4 yellow pins are connect
53. s OFF SWPRE NF Non fading preout LO S ON The local seek function is ON Function of the KDC 5020R Function of the KDC 5020R News Bulletin with Timeout Setting Tuning Mode In Tuner mode It switches automatically when a news bulletin starts even if the Sets the tuning mode radio isn t being listened to Also the time interval when Tuning mode Display Operation interrupt is DRORIBHRCL ean bg set Auto seek AUTO 1 Automatic search for a station Display and Setting Preset station seek AUTO 2 Search in order of the stations NEWS OFF in the Preset memory NEWS 00M Manual MANUAL Normal manual tuning control NEWS 90M When NEWS 00M NEWS 90M is set the News Bulletin Function of the KDC MPV7020 KDC 6020 KDC 5020R Interrupt function is ON Auto Memory Entry In Tuner mode gt When it s ON the NEWS indicator is ON When the news bulletin starts NEWS is displayed and it For the operation method refer to Auto Memory Entry page Switches to the news bulletin 14 19 f you choose the 20 setting further news bulletins will not be received for 20 minutes once the first news bulletin is received The news bulletin volume is the same level that was set for traffic Function of the KDC MPV7020 KDC 6020 KDC 5020 information page 15 This function is only available if the desired station sends PTY code CRSC Clean Reception System Circuit for news bulletin or belongs to lt Enhanced Other Network
54. s shown below KDC MPV7020 Vers N WY N sl A EN Ws When disc is inserted the IN indicator is ON l E sa Z i 2270 Ss When a disc is inserted Gy Ws ao 74 wie teu ar Press the SRC button Select the display Pause and play Track number Track time Disc number Press the gt 11 button KDC 5020 5020R Sid button is pressed it pauses and plays m ject the disc IN indicator 1 Drop open the faceplate Press the Release button 2 Eject the disc Press the 4 button Track time Disc number Track number 20 3 Press the faceplate on the right side and return it to its former position 3 in Bcm disc can t be played Using an adapter and inserting them into this unit can cause damage E The MP3 media that this unit can play are CD ROM CD R and CD RW The medium formats must be ISO 9660 Level 1 Level 2 Joliet or Romeo The methods and precautions to be followed for writing MP3 data are covered in lt Notes on playing MP3 gt page 6 Check that section before creating your MP3 media Playing External Disc Playing discs set in the optional accessory disc player connected to this unit Press the SRC button Select the display for the disc player you want Display examples Display Disc player CD2 CD player DISC CH CD changer MD changer Pause and play Press the gt 11 button Each time the button is
55. scrolled is shown below VOL E CD text SRC SRC voL 7 MD title L Radio text Function of the KDC MPV7020 KDC 6020 Built in Auxiliary input Setting Set the Built in Auxiliary Input function Display Setting AUX OFF When selecting the source there s no Auxiliary Input AUX ON When selecting the source there s Auxiliary Input 30 Loading and Replacing the battery Use one lithium battery CR2025 Insert the batteries with the and poles aligned properly following the illustration inside the case Keep ws x m d Pull out AWARNING Store unused batteries out of the reach of children Contact a doctor immediately if the battery is accidentally swallowed AN Do not set the remote on hot places such as above the dashboard Basic operations VOL buttons Adjusting the volume SRC button Each time the button is pressed the source switches For the source switching order refer to lt Selecting the Source gt page 8 ATT button Turning the volume down quickly When it is pressed again it returns to the previous level In Tuner source FM AM buttons Select the band Each time the FM button is pressed it switches between the FM1 FM2 and FM3 bands 4 44 gt gt buttons Tune up or down band 0 9 buttons Press buttons 1 6 to recall preset stations DIRECT button Enters and cancels the lt Direct Access Tunin
56. ss the reset button if the disc auto changer fails to operate correctly Normal operation should be restored recautions Reset button We recommend the use of the Security Code function see p 24 to prevent theft Characters in the LCD may become difficult to read in temperatures below 41 F 5 The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used Therefore what appears on the display in the illustrations may differ from what appears on the display on the actua equipment and some of the illustrations on the display may represent something impossible in actual operation Lens Fogging Right after you turn on the car heater in cold weather dew or condensation may form on the lens in the CD player of the unit Called lens fogging CDs may be impossible to play In such a situation remove the disc and wait for the condensation to evaporate If the unit still does not operate normally after a while consult your Kenwood dealer Cleaning the Faceplate Terminals If the terminals on the unit or faceplate get dirty wipe them with a dry soft cloth Cleaning the Unit If the faceplate of this unit is stained wipe it with a dry soft cloth such as a silicon cloth If the faceplate is stained badly wipe the stain off with a cloth moistened with neutral cleaner then wipe neutral detergent
57. the unit halfway while pressing towards the inside Be careful to avoid injury from the catch pins on the removal tool 5 Pull the unit all the way out with your hands being careful not to drop it Troubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring Before calling service first check the following table for possible problems General The power does not turn ON The fuse has blown ts After checking for short circuits in the wires replace the fuse with one with the same rating The TEL mute function does not work The TEL mute wire is not connected properly Connect the wire correctly referring to the section on Connecting Wires to Terminals The TEL mute function turns ON even though the TEL mute wire is not connected v The TEL mute wire is touching a metal part of the car Pull the TEL mute wire away from the metal part of the car No ACC position on vehicle ignition t Connect the same wire to the ignition as the battery wire Even if Loudness is turned ON high pitched tone isn t compensated for Tuner source is selected High pitched tone isn t compensated for when in Tuner source Nothing happens when the buttons are pressed v The computer chip in the unit is not functioning normally te Press the reset button on the unit page 4 There s a source you can t switch

Download Pdf Manuals

image

Related Search

Related Contents

MetaFluor User Guide  Bedienungsanleitung  NÃO - MIS  PHT4545  USB-FRM02 User`s Manual  Brother P-Touch 2200 Thermal Printer  Cooper Lighting CR2TC35 User's Manual  Read all instructions before assembly and use of the child  Aastra C1148 User's Manual  wr07 fibrowin tixotrópica  

Copyright © All rights reserved.
Failed to retrieve file