Home

Kenwood C-707I Stereo System User Manual

Contents

1. Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel 13 Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the power supply cord or plug is damaged b If liquid has been spilled or objects have fallen into the product c If the product has been exposed to rain or water g con d If the product does not operate normally by following the operating instructions e If the product has been dropped or damaged in any way and f When the product exhibits a distinct change in performance this indicates a need for service g f an abnormal smell or smoke is detected 14 Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards 15 Safety Check Upon completion of any service or repairs to this product ask the service technician to perform safety checks to determine that the product is in proper operating condition 16 Wall or Ceiling Mounting This product should be mounted to a wall or ceiling only as recommended by the manufacturer
2. T Press the RANDOM key The mode changes as shown below each time you press the key i DC displayed gt J Random playback mode Random playback off SSM During folder playback this mode plays the files in the folder in random order Pressing the ka a key skips back to the beginning of the track being played Track Repeat Playback Mode This mode repeats a particular track or all the tracks on a CD T Press the CD gt 1 or USB 11 key to start playback of a track you want to repeat 2 Press the REPEAT key to begin repeat playback The mode changes as shown below each time you press the key i 1 displayed If displayed Single track repeat All track repeat Repeat playback off playback playback REPEAT MERA During folder playback this mode plays the files in the folder repeatedly bed During program playback this mode plays the tracks in the program repeatedly English a Receiving Radio Broadcasts This section explains how to listen to the FM AM radio and set radio stations Listening to FM AM Radio Simply pressing the TUNER band key turns on the system and allows you to listen to the radio Select a reception mode Press the TUNER band key g7 The mode changes as shown below each time you press the key G FM Stereo FM Monaural mn ST is displayed while a stereo broadcast is being received in FM Stereo reception mode 2
3. Remember that resetting erases any stored information and restores the system s default settings English ar Glossary Meaning An audio compression method developed by Germany s Fraunhofer IIS which achieves high rates of data compression by discarding data not readily audible to humans MP3 can compress data down to rates of approximately 1 11 128 kbps while retaining sound quality equivalent to a music CD USB mass storage A standard for computer control of a USB device It also makes class it possible for a computer to recognize a connected USB device as an external storage device VBR A system that varies the amount of data per time segment in 25 Variable Bitrate accordance with the music data volume An abbreviation for the Windows Media Audio audio compression and encoding system developed by Microsoft Corporation of the U S Sampling frequency A value that indicates the number of times per second analog signals are sampled for conversion to digital signals The sampling frequency for music CDs is 44 1 kHz Normally the higher the sampling frequency the better the sound quality Bitrate A value indicating the amount of information processed per second The higher the bitrate the better the sound quality C7071 Care and Storage Care and storage of main unit E Keep the system out of the following locations Areas exposed to direct sunlight Areas subjected to excessive humidity
4. Use of an 8 cm CD adapter is not supported Notes on CD ROM CD R CD RW discs If the CD ROM CD R or CD RW disc being used has a printable label surface the label surface may cause sticking that makes it impossible to remove the disc from the system To prevent malfunction of the system do not use such discs Handling USB devices COMPACT Always use a disc carrying the lise marking DIGITAL AUDIO A disc without this marking may be unable to be played back correctly The disc rotates at a high speed during playback Never use a cracked chipped or greatly warped disc Otherwise damage or malfunction of the player may result Also do not use a disc with a non circular shape as this may result in malfunction Handling precautions Be sure to read the instruction manual that comes with the device you are using This system does not come with a USB device It is up to you to purchase a commercially available USB device separately The USB port on the front panel of the main unit supports USB2 0 Full speed Do not use a USB device connected via a USB hub Certain conditions while using a USB device can cause contents stored on the USB device to be lost Note that Kenwood will not be held liable for any losses arising out of loss of stored contents con Supported USB devices The following are the limitations on the type of USB devices that can be used and on the scope of their use USB mass
5. TONE appears on the display when the BASS or TREBLE setting is something other than 0 Changing the SOUND setting disables EX BASS automatically English Component Settings This chapter explains basic timekeeping settings as well as settings for the timer display and other functions that help make the system easier to use Setting the System Clock seeeeeeee 68 Setting the Timer e Setting the Sleep Timer SLEEP cceceeeeeeeeeeeees 69 Setting the Program Timer PROGRAM 0sceeeeeeeeeeeee 70 Display Settings e Setting the Display Brightness DIMMER 74 Auto Power Save cccscccccsccssccccccccsccesscees ZD English Setting the System Clock Set the system clock to the correct time If the system clock time setting is not correct the Program Timer will not start playback at the correct time i Y Press the TIMER key Press the lt or gt key gt Press the ENTER key The current time will appear if clock settings are already configured Press the ENTER key and advance to step 2 7 Set the day of the week Use the lt and gt keys to set the day of the week gt Press the ENTER key 3 Select the timekeeping format Press the lt or gt key 12 hour format 12 hour format 24 hour format Midnight and Midnight and noon displayed as
6. 7071 iPod Audio Settings gt Page 63 onwards Related Information This mode repeatedly plays the tracks on an iPod T Press the iPod 11 key to play a track you want to repeat 2 Press the REPEAT key to begin repeat playback The mode changes as shown below each time you press the key Single track repeat playback H iPod SB All track repeat playback J eres Check the iPod display to see the currently selected repeat mode WER This mode is not supported with the iPod classic 6th generation and iPod nano 3rd generation During album playback this mode repeatedly plays the album During random playback after all the tracks are played back randomly they are repeated in a different random sequence When both random playback and album playback are being used the tracks in the albums are repeatedly played in a different random sequence each time English fey External Components This section explains how to connect external components to the system and play back tracks Playback from External Components Connect the external component to the system as described in lt Connecting Other Commercially Available Devices gt page 17 When connecting external components always turn this system and the external components off beforehand Also refer to the instruction manual that comes with the external component being connected T Connect the extern
7. Switches the time indication shown on the display Page 36 MUTE Mute Page 22 Clears settings con Component Names and Functions Using the remote control After plugging the main unit into an AC wall outlet press the power key on the remote control unit to turn the system on After the system powers up press the key for the function you want to use Point the remote control at the remote sensor when using it Approx 6 m The remote control may not operate correctly if direct sunlight or light from a high frequency fluorescent lamp such as an inverter type is shining on the remote sensor If this happens move the system to a different location to avoid this type of malfunction Loading the remote control batteries The batteries supplied with the system are for operational testing and may last only for a short time Remove the Load the R6 size Close the battery cover batteries supplied with battery cover the system A CAUTION Always replace the batteries with two new ones Check the polarity of the batteries when loading them Never heat or take apart the batteries or put them in the fire or the water If batteries are not used correctly they may burst or leak This will cause a fire injury to persons or damage to the surroundings English Basic Operation This section explains basic general o
8. 17 Heat This product should be situated away from heat sources such as radiators heat registers stoves or other products that produce heat Do not place a flaming object such as a candle or lantern or near the product 18 Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal Safety Precautions 19 Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built up static charges Article 810 of the National Electrical Code ANSI NFPA 70 provides information with regard to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE a ANTENNA LEAD IN WIRE an God ANTENNA DISCHARGE UNIT NEC SECTION 810 20 GROUND CLAMPS ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS
9. Pages 16 48 I Power Page 23 3 Turns the system on or off Standby TUNER band Page 42 KENV CD II Page 30 USB II Page 32 IAE Pages 34 35 50 57 STOPE Pages 34 35 INPUT SEL Pages 48 60 iPod terminal Pages 17 56 ope Sa IQPHONES jack Page 17 lt USB port Pages 16 32 One touch Operation This system features a convenient one touch operation function In Standby mode pressing any of the following keys will turn on system power TUNER band CD 11 USB 11 iPod 11 D AUDIO 11 remote control only or AUX remote control only If there is a disc loaded playback will begin Standby Mode While the STANDBY TIMER indicator on the main unit is lit the system is using very weak current to maintain the built in memory This is called Standby mode When system main unit is in this mode you can turn it on using the remote control 12 con Component Names and Functions Display Shows numbers and text Displayed when a USB device is detected Page 32 Displayed when an iPod is detected Page 56 Displayed while a CD is loaded Page 30 _ _ Displayed while an audio folder or file is selected Page 37 Displayed while CD or USB playback is paused Pages 30 32 Displayed during CD or USB playback Pages 30 32 Displayed
10. TUNER use the lt and gt keys to select a preset number and then press the ENTER key This completes the setting procedure COMPLETE will appear on the display briefly followed by the normal display Setting the Timer Setting the System Clock Page 68 Related Information V1 Press the power key to turn the power OFF The STANDBY TIMER indicator on the main unit lights in orange E To exit the setting procedure part way through Press the TIMER key E To turn a timer off or on When the system is turned on hold down the TIMER key for about 2 seconds The setting changes each time you hold down the TIMER key for about 2 seconds OWMINSENSCm gt MOP oeyice PROG 1 on PROG 2 on COMP Matson a MOLERI Timer off PROG 1 and 2 on Even when a timer is off its settings are retrained The STANDBY TIMER indicator will light in red if there was a power failure or the system was unplugged from the wall outlet for some time If this happens set the system clock to the correct time again Page 68 To modify the program settings reconfigure the timer settings from the beginning English Display Settings Use this procedure to adjust the brightness of the display tting the Display Brightness DIMMER The brightness of the display can be adjusted to one of 2 levels Adjust the brightness according to your preferences and the conditions in the room m d Ho
11. NEC SECTION 810 21 GROUND CLAMP t POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC ART 250 PART H NEC NATIONAL ELECTRICAL CODE Notes 1 Item 7 is not required except for grounded or polarized equipment 2 Item 19 complies with UL in the U S A Information on Disposal of Old Electrical and Electronic Equipment applicable for EU countries that have adopted separate waste collection systems Products with the symbol crossed out wheeled bin cannot be disposed as household waste Old electrical and equipment should be recycled at a facility capable of handling these items and their waste byproducts Contact your local authority for details in locating a recycle facility nearest to you Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment electronic English How to Use This Manual Operation procedure While this system can be controlled from either the remote control or the main unit the explanations in this manual primarily describe operation procedures using the remote control Remote control keys used in the procedure Display shown during or after an operation The displays shown in this instruction manual may differ from the actual displays c 7071 CD This section explains how to play a CD In addition to commercially avai
12. Selecta station Choosing from preset stations Preset Call Select a preset station You need to preset stations before you can perform these operations Page 44 H Selection with the P CALL keys Each press of the lt or gt key cycles sequentially through the preset stations Holding down the lt or gt key will scan sequentially through the preset stations at a 5 second interval H Selecting a preset station with the number keys To select station P17 press the 1 key press the 7 key and then press the ENTER key To select station P23 press the 2 key press the 3 key and then press the ENTER key C 7071 Receiving Radio Broadcasts Presetting Stations Page 44 Related Audio Settings Page 63 onwards INTEL Setting the System Clock Page 68 Choosing from stations that are not preset Auto Manual Tuning E Using Auto Tuning Holding down the TUNING a a m key for more than 1 second will cause the system to jump automatically to the next receivable station Repeat this step until you find the station you want E Using Manual Tuning Use the TUNING B gt B gt key to change the frequency until you find the station you want Sag There is no sound output while Auto Tuning is in progress The display changes as shown below each time you press the DISPLAY key If you want to display Day Clock screen configure time settings P
13. Supply current Max 500 mA VBR audio data may produce bitrates outside the above range which may make playback impossible E iPod Max SUPPlY DOWEL uinna DC5V 500 mA KENWOOD c 7071 E CD player Scanning method D A Conversion Oversampling Frequency characteristics MP3 WMA Max folders Max folder nesting MP3 WMA Max file Semiconductor laser 8 fs 352 8 kHz 20 Hz to 20 kHz E Power Supply etc Supplied AC adapter Australiaan 12V DC 240 V AC 50 Hz Europe 12 V DC 230 V AC 50 Hz Power consumption Standby power consumption DIMENSIONS unanini Less than 0 5 W Width 210 mm 8 1 4 Height 228 mm 9 Depth 187 mm 7 3 8 Weight Met ssi santos tnt saat acneatiunee Rants 2 2 kg 4 9 Ib Speakers LS C707 System Enclosure Loudspeaker Nominal impedance Nominal input power Max input power Full range speaker system Magnetically shielded Bass reflex 80 mm 3 1 8 Cone type 20W esenee Width 149 mm 5 7 8 DIMENSIONS sacsccccenssseesecconnsvevosronnisete Height 191 mm 7 1 2 Depth 128 mm 5 1 16 WI GHE MEE insna 1 2 kg 2 7 Ib each Design and specifications are subject to change without notice Full performance is not guaranteed in extremely cold environments under water freezing temperatures For your records Record the serial number found on the back of the unit in the spaces designat
14. Tre Adjusts the recording level TA 5 OUT Page 54 LEVEL Performs PTY search Page aHa CCONER O FF Switches the sourcercontror 1 1C n playback Pages 30 32 42 48 56 60 ICX CUSE D ee em 1 Cn 1 Switches the folder playback e mode Page 37 Selects folders PREV Cw Page 34 35 37 50 LL ii Selects the radio station 1 p 1 a 5 f I 1 n Page 42 epee 1 com iN Le Selects the album Page 57 i Adjusts various levels Pages 51 62 68 70 T P MODE C Selects the track ies Pages 34 35 50 57 CD i Switches the playback method Pages 39 41 58 59 Numbers pad 7 e Selects tracks or radio stations Pages 34 35 42 CLEAR Configures the Auto Power e Save setting Page 75 RRR ENTER l GOT KENWOOD RC FOSO9E e I __ Switches power on and off Standby Page 23 I TIMER 1 I I C seep Configures time and timer fl Cy settings Pages 68 69 I i Stops Pages 34 35 Sets sound quality Pages 64 65 Applies settings Adjusts volume Page 22 Adjusts the level Page 65 Skips back or forward through tracks Page 34 35 57 Selects the radio station Page 43 Switches the information shown on the display Page 36 Turns on iPod backlight DISPLAY Page 57 gu Adjusts display brightness TIME DISP Page 74 e r r
15. 30 This system is capable of displaying alphanumeric characters Other character types are displayed as pound marks File format Windows Media Audio compliant Extension wma Sampling frequency 32 kHz to 48 kHz Bit rate 64 kbps to 192 kbps Files created using functions in Windows Media Player Other notes 9 or later cannot be played Note that even where audio files comply with the WMA Professional above standards playback may fail due to factors such WMA Lossless as the disc characteristics or recording conditions WMA Voice Playback also may fail depending on the specifications z of the encoding software or the settings used for Disc formats encoding ISO 9660 Level 1 DRM Digital Rights Management files cannot be ISO 9660 Level 2 played Audio files encoded using VBR Variable Bit Rate may use bit rates that fall outside the supported range Audio files with bit rates outside the supported range USB Supported File Systems cannot be played Windows Media is a trademark of Microsoft ma bo 25 a5 a4 33 wea D NO oS Corporation registered in the U S and other countries English Important Information Handling Discs Handling precautions Cautions on CD discs When handing a disc never touch the playing surface Discs playable on the system This system can play back CD 12 cm 8 cm CD ROM CD R or CD RW discs or the audio part of CD EXTRA discs
16. Saturday Monday Friday Sunday Saturday Friday v Press the ENTER key If you selected EVERYDAY MON FRI TUE SAT or SAT SUN proceed to step 6 5 Select EVERY WEEK or ONETIME Press the lt or gt key The timer runs every week The specified timer runs once only Press the ENTER key oe Specify the ON TIME start time Use the lt and gt keys to set the hour Continued to next page English Setting the Timer 707 7 Specify the OFF TIME off time Use the lt and gt keys to set the hour 8 Select PLAY or Al PLAY Press the lt or gt key Playback is at the volume you set in step 9 This setting causes the volume to increase gradually up to the volume level you set in 7Y step 9 Press the ENTER key 9 Set the volume Press the lt or gt key gt Press the ENTER key You cannot use the VOLUME key to set the volume 10 Select the input source Press the lt or gt key TUNER cD iPod The mode setting cycles as shown below each time you press a key gt AUX R D AUDIO USB T 4 Press the ENTER key vava Ifyou selected an input source other than TUNER this completes the setting procedure The message COMPLETE will appear on the display briefly followed by the normal display If you selected
17. in a range from 3 to 3 REE Adjusting the input level also changes the volume of the external component connected to the D AUDIO IN terminal English D AUDIO con ording to a Digital Audio Player This section explains how to record from a variety of different sources to a Kenwood digital audio player You also can configure the digital audio player to detect silence and divide the recording into tracks automatically Always turn this system and the digital audio player off before connecting the digital audio player Refer to the instruction manual that comes with the digital audio player you are connecting also The following assumes that the source device is already connected to the system Compatible Kenwood digital audio players As of November 2007 Memory audio player M2GC7 M1GC7 r Connect the digital audio player to the REC OUT terminal on the rear panel of the main unit or cog sus WOOFER PRE OUT al 2 Select the input source Press the CD I USBR 11 iPod 11 TUNER band INPUT SEL main unit only or DAUDIOB I remote control only key D AUDIO Connecting Other Commercially Available Devices Page 16 Related Adjusting the Recording Level Page 54 Information L7 Prepare the source to be recorded E Recording from a CD USB iPod Press the CD 1 USBB 1 or iPod 1 key t
18. or dust Areas exposed to direct heat from heating equipment E Be careful against condensation Extreme differences between system temperature and air temperature can cause water droplets condensation to form on the system The system will not operate properly while condensation is present If condensation forms do not use the system for a few hours to allow the condensation to dry Take special care against condensation when the system is moved between two locations of very different temperatures or into a room where high humidity is present Em When the main unit becomes dirty When the front panel or case gets dirty wipe it with a soft dry cloth Never use lacquer thinner benzine alcohol or contact revitalizer which will cause discoloration or deformation Care and storage of CDs E Storing a CD If you do not plan to use a CD for a long time remove it from the main unit and store it in its case E Cleaning a CD When a disc becomes soiled with fingerprints or other stains use a soft dry cloth to wipe it gently in a pattern radiating from the center of the disc Do not use a phonograph record cleaner lacquer thinner benzine or alcohol to clean CDs Do not use any disc accessory stabilizer protective sheet protective ring etc or lens cleaner E Other cautions Do not write on a CD with a pencil or ballpoint pen Do not use a CD if its sticker or label is peeling or if any a
19. or symbol The disc is dirty Clean the disc See lt Care and Storage gt Page 83 Insert the disc correctly in the center of the inlet slot Page 30 The CD is loaded the other way around Load the CD correctly Page 30 CD NO DISC There is no CD loaded The CD cannot be recognized Load a CD Page 30 Er CD01 The CD unit is not operating correctly Request servicing NOT SUPPORT You are trying to play back data from a copyright protected WMA audio file or from an unsupported file format There are no playable MP3 or WMA audio files REMOVE OK The USB device can be removed safely Disconnect the USB device from the USB port Page 33 USB NO MEDIA A USB device is not connected The USB device cannot be recognized Check the connections Page 16 READING The media s TOC information is being read is the media name 1 In addition to audio signals information called the Table of Contents TOC is recorded on each CD The TOC is similar to the contents page of a book and information such as the text playing times and number of tracks including some items that cannot be rewritten con Troubleshooting Whenever the system is not operating as expected check the following tables to see if you can resolve the problem yourself before requesting service Amplifier Speakers Symptoms Solution Ref page No sound output Check all connections as described in l
20. panel To connect other devices to the front panel connectors of the main unit raise the panel cover and then connect the devices Caution for outdoor antenna installation Panel cover D AUDIO IN Connect digital audio players to the D AUDIO IN terminal on the front panel of the main unit p i Ifyou connect a Kenwood player that supports digital bos amp H audio link using the dedicated cable you can control the player from the main unit and the remote control Page 48 It can also be connected using a 3 5 mm stereo mini Digital audio player plug cable commercially available unit When you are not using the digital audio player unplug the mini plug cable from the main unit Connect USB flash memory or USB mass storage class compliant digital audio players to the lt USB port on the front panel of the main unit Depending on the device being connected it may take some time for the system to recognize it With some models a USB connection mode selection screen will appear Select Storage Mode c 7071 Connecting the System Connect an iPod to the iPod terminal on the front panel of the main unit To connect an iPod you will need a PNC iP120 iPod connection cable optional accessory When you are not using the iPod unplug the iPod connection cable from the main un
21. starts to scroll to protect the screen from image burn and uneven brightness English Important Information Supported Media Never connect any other device besides USB flash memory or a USB mass storage class compliant digital audio player to USB flash memory the USB terminal Note that Kenwood will not be held liable for any losses related to malfunction damage or data loss due to connection of any other type of device USB mass storage class compliant digital audio player You may not be able to play discs that do not conform to the Commercially available CD standard such as Copy Control CDs music CDs Discs must be finalized during writing In this manual MP3 and WMA files are referred to collectively CD R CD RW recorded with as audio files cD CD DA f t F f A DA forma Depending on the equipment or recording mode used for recording onto a CD ROM CD R or CD RW disc and depending on the type of CD ROM CD R or CD RW disc used CORO MIG mice Hay discs you may not be able to play the disc on this system recorded with MP3 WMA files Precautions when writing data to discs Discs recorded in Packet Write mode or UDF Universal Disc Format cannot be played When writing data to a disc always close the session or finalize the disc The disc may not play properly if you do not close the session or finalize the disc Depending on the specifications of the writing software used t
22. the D AUDIOB I key Playing the tracks in the previous next folder To go to the previous folder press the PREV key To go to the next folder press the NEXT key Skipping forward back Hold down the ka a or gt key Skipping tracks skipping back skipping to the start To skip to the previous or next track Press the ka a key previous or m key next To return to an earlier track Press the ka a key two or more times in succession To return to the beginning of a track Press the ka a key once If you use the dedicated cable for the connection the volume and sound quality settings on the digital audio player are disabled ifthe digital audio player is not connected using the dedicated cable use the controls on the connected digital audio player With the following digital audio players you cannot select a folder for playback M2GD55 M1GD55 7071 D AUDIO Playing Back from a Digital Audio Player Page 48 Related Audio Settings Page 63 onwards Information Adjusting the Input Level Use the following procedure to adjust the input level of a digital audio player Use this adjustment when the volume from an external component is noticeably higher or lower than other input sources at the same volume setting T Turn off the digital audio player 3 Adjust the Input Level Press the lt or gt key You can adjust the input level
23. while playback mode is set Page 37 41 Displayed while the program timer is set Page 70 Displayed while the sleep timer is set Page 69 The displays shown here may differ from the actual display Lights in the PTY search mode Page 47 Lights when an RDS broadcast is received Page 46 Displayed while SOUND is selected Page 65 Displayed while EX BASS is on Page 64 Displayed while a broadcast is being received in FM STEREO mode Page 42 Displayed in FM reception mode Page 42 STEREO Shows the clock the elapsed time or the frequency FM Displayed in FM reception mode Page 42 AM Displayed in AM reception mode Page 42 Displayed while the clock is displayed Page 68 PM Displayed while the clock is displayed Page 68 TOTAL Displayed during CD playback while the total elapsed time and remaining time are displayed Page 36 kHz Shows the AM frequency Page 42 MHz Shows the FM frequency Page 42 Displayed while sound is muted Page 22 Lights when Auto Power Save A P S is set Page 75 Displayed during WMA audio file playback Pages 30 32 Displayed during MP3 audio file playback Pages 30 32 English 19 Component Names and Functions Remote control Remote control keys with the same names as keys on the main unit have the same functions as the main unit keys Displays channel Page 46
24. Accessories Do not place this product on an unstable cart stand tripod bracket or table The product may fall causing serious injury to a child or adult and serious damage to the product Use only with a cart stand tripod bracket or table recommended by the manufacturer Any mounting of the product should follow the manufacturer s instructions and should use a mounting accessory recommended by the manufacturer A product and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the product and cart combination to overturn 5 Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating and these openings must not be blocked or covered The openings should never be blocked by placing the product on a bed sofa rug or other similar surface This product should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have been adhered to 6 Power Sources This product should be operated only from the type of power source indicated on the product If you are not sure of the type of power supply to your home consult your product dealer or local power company 7 Polarization This product may be equipped with a polarized alternating current line plug a plug having one blade wi
25. Audio Settings Page 63 onwards UTE o Selecting Track Program Playback Mode Page 39 Explains the procedures for iPods Explains the procedures for external components Explains how to set the sound Cautions when loading a CD ACD cannot be loaded while the system is in Standby mode quality Do not try to force a CD into the inlet slot while the system is in Standby mode Doing so can cause malfunction If you experience problems loading a CD pull it out and then re insert it Do not touch the playing surface of the disc Use of an 8 cm CD adapter is not supported Ifyou insert an 8 cm CD so it is off center relative to the inlet slot it will not slide all the way into the slot Take care when using an 8 cm CD Ifa CD is already loaded opening the slide door will eject it Explains how to set up component units Explains how to carry out system maintenance Removing a C Explanations of remote 4 control procedures T Press the m key to stop playback ESE Explanations of main unit procedures 2 Slide the slide door cover towards the back panel to eject the CD Sliding the slide door will eject the CD ifthe CD is playing when you slide the slide door to the back panel playback will stop and the CD will be ejected 3 Slide the slide door towards the front panel to close it G ACD cannot be ejected while the system is in Standby mode Supplementa
26. Back from an iPod 56 CL DY XeonTnyeXeUdl nNOS IAT PYG loroccobaacheoonssaendosssdabsodcnnanooodosese 56 Random Track Playback Mode Shuffle 02 eceeeee 58 e Track Repeat Playback Mode sseeceeeeeeeeeeen ones 59 External Components Playback from External Components cseeeeeeeeeee 60 e Disconnecting the External Component aga Ol Adjusting the Input Level ce ceeeeeeceeeeeeeeeeeen ones 62 English 2 CD This section explains how to play a CD In addition to commercially available music CDs you also can play discs with MP3 and WMA audio files recorded on them For details see lt Supported Media gt page 24 Load and play the CD Ifa disc is already loaded simply press the CDB gt 1l key to turn the system on and begin playback 1 Open the slide door and load the CD Center the CD with the inlet slot with the label side facing towards the front of the main unit Slide door After you inset the CD part way it will be pulled Label automatically the rest of the surface Way In 2 Slide the slide door towards the front panel to close it The CD will not play unless the slide door is closed fe Press the CD I1 key i Indicates CD is loaded Track number Source Elapsed time of Playback indicator current track SEEM Track numbers may not display correctly while following types of discs are playin
27. ENTER key While the TUNER CLEAR message is on the display press the ENTER key English RDS Radio Data System This system is designed for RDS reception it can extract the information from the broadcast signal for use with various functions such as automatic display of the station name Select the FM band Page 42 When an RDS broadcast is received the station name is automatically displayed Srenzo The RDS lights up when an RDS broadcast signal is received To switch the displays Press the RDS key The mode changes as shown below each time you press the key g RT Radio Text display SER Some stations may not be provided or be given different names depending on countries or areas NO PS is displayed if there is no Program Service name NO RT is displayed if there is no Radio Text 46 con Listening to FM AM Radio Page 42 Related Information The tuner automatically searches for a station which is currently broadcasting a specified program type genre i Press the PTY key When an RDS broadcast is received the program type is shown on the display If no PTY data is available or if the station is not an RDS station None is displayed Press the lt or gt key to select the desired program type p MAN cowaot rents neve Select it
28. KENWOOD LIFE STYLE HI Fl COMPONENT SYSTEM C 7071 INSTRUCTION MANUAL Kenwood Corporation This model consists of a main unit RD C707 and a pair of speakers LS C707 Declaration of Conformity with regard to the EMC Directive 2004 108 EC Manufacturer Kenwood Corporation 2967 3 Ishikawa machi Hachioji shi Tokyo 192 8525 Japan EU Representative s Kenwood Electronics Europe BV Amsterdamseweg 37 1422 AC UITHOORN The Netherlands DIGITAL AUDIO Oc Wm a B60 5700 08 00 E X AB diet CDRW me O Made for iPod Safety Precautions Before Applying Power Caution Read this page carefully to ensure safe operation Units are designed for operation as follows AC 240 V only AC 230 V only Safety precautions WARNING TO PREVENT FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED DANGEROUS VOLTAGE WITHIN THE PRODUCT S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPO
29. RTANT OPERATING AND MAINTENANCE SERVICING INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE The marking of products using lasers CLASS 1 LASER PRODUCT The marking this product has been classified as Class 1 It means that there is no danger of hazardous radiation outside the product Location Back panel con Safety Precautions IMPORTANT SAFETY INSTRUCTIONS Caution Read this page carefully to ensure safe operation Read Instructions All the safety and operating instructions should be read before the product is operated Retain Instructions The safety and operating instructions should be retained for future reference Heed Warnings All warnings on the product and in the operating instructions should be adhered to Follow Instructions All operating and use instructions should be followed 1 Cleaning Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning 2 Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards 3 Water and Moisture This product shall not be exposed to dripping and splashing for example near a bath tub wash bowl kitchen sink or laundry tub in a wet basement or near a swimming pool and the like Do not place an object containing liquid such as a flower vase on the appliance 4
30. age 68 Ce eo E Pianoa DISPLAY English W Receiving Radio Broadcasts o 7071 T TONS my Presetting Stations Use this procedure to make the station you are currently listening to a preset number If the selected preset number is already assigned a station the existing station is overwritten by the new station You can preset up to 40 FM and AM stations Select the reception mode you want to use to preset a station Press the TUNER band key to switch the source To receive FM stereo broadcasts select FM Stereo Tune in the station you want to preset and then press the ENTER key Use Auto Tuning or Manual Tuning to tune in the desired station Page 43 a The preset number flashes The above indicates there are no preset numbers assigned stations Lp Select the desired preset number P01 to P40 Press the lt or gt key Currently selected preset number If the selected preset number is already assigned a station the existing station is overwritten by the new station r Press the ENTER key STEREO Receiving Radio Broadcasts Listening to FM AM Radio Page 42 Related Information Clearing All Preset Stations This procedure deletes all of the currently preset stations Fa Hold down the CLEAR key for about 4 seconds The message TUNER CLEAR remains on the display for about 10 seconds Press the
31. al component to the AUX IN terminal on the back panel of the main unit I AUK IN i J al ey a Audio OUT EJ con 2 Select AUX as the source Pi Press the AUX key p BEE Press the INPUT SEL key S The source changes as shown below each time you press the key Com J 3 Begin playback on the connected external component Perform the required operation on the connected external component to start playback External Components Connecting Other Commercially Available Devices gt Page 17 Related Audio Settings Page 63 onwards INTEL Adjusting the Input Level Page 62 Disconnecting the External Component myy Turn off this system and the external component 2 Disconnect the external component English ot External Components Adjusting the Input Level Use the procedure below to adjust the input level for the external component connected to the AUX IN terminal Use this adjustment when the volume from an external component is noticeably higher or lower than other input sources at the same volume setting iW Select AUX as the source Pi Press the AUX key 7 BEEE Press the INPUT SEL key as The source changes as shown below each time you press the key Cee J 2 Adjust the input level Press the lt or gt key You can adjust the input level in a range from 3 to 3 SEE Adjusting the
32. anual that comes with the digital audio player you are connecting Connecting the digital audio player using the dedicated cable allows you to operate the digital audio player using the main unit or the remote control Compatible Kenwood digital audio players As of November 2007 Memory audio player M2GD55 M1GD55 M1GC7 M2GC7 fr Connect the digital audio player to the D AUDIO IN terminal on the front panel of the main unit teas H Always turn this system and the digital audio player off before connecting the digital audio player 2 Turn on the digital audio player p Play back from a digital audio player Pi Press the D AUDIO I1 key Simply pressing the D AUDIOB I key turns on the system and begins playback ry BEE Press the INPUT SEL key The source changes as shown below each time you press the key Gem wee 48 con D AUDIO Connecting Other Commercially Available Devices gt Page 16 Related Audio Settings Page 63 onwards INTEL Adjusting the Input Level Page 51 m d Turn off this system and the digital audio player 2 Disconnect the digital audio player Disconnect the digital audio player s connection cable from the D AUDIO IN terminal English 49 D AUDIO E Operations during digital audio player playback Pausing and resuming playback Press
33. back settings Page 39 English Ry a USB USB This section explains how to connect USB flash memory or a USB mass storage class compliant digital audio player to the system and play its MP3 or WMA audio files con Playing back from a USB device This section explains how to play MP3 or WMA audio files from USB flash memory or a USB mass storage class compliant digital audio player Also refer to the instruction manual that comes with the USB device you are connecting 1 Connect a USB flash memory or the cable of a USB audio player to the lt USB port on the front panel of the main unit Before connecting a USB device to the system turn off both the system and the USB device 2 Press the USB I1 key The system finds the MP3 and WMA audio files on the connected device and start playback See page 38 for the playback sequence when there are multiple folders or audio files on the connected device Playback does not start if there are no playable MP3 or WMA audio files on the connected device Depending on the connected device the number of files and other factors reading of files can take some time If you are using a Kenwood digital audio player a USB connection mode selection screen may appear Select VSB mode Storage Mode and then press the USB H key again Player Do not disconnect the USB device wh
34. der than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug Continued to next page N English Safety Precautions IMPORTANT SAFETY INSTRUCTIONS 8 Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and the point where they exit from the product 9 Lightning For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the product due to lightning and power line surges 10 Overloading Do not overload wall outlets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock 11 Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the product 12 Servicing
35. dhesive is coming out from under the sticker or label Do not affix paper stickers or labels to CDs Care and storage of connected components Be sure to read the instruction manual that comes with each component English fi Specifications Main Unit RD C707 E Amplifier Effective output power during STEREO operation 10 W 10 W RMS 1 kHz 10 T H D 6Q 4 dB 70 Hz Vol 20 EX BASS Input terminals Sensitivity Impedance LINE D AUDIO AUX 600 mV 47 KO At input level 0 Output terminals Level Impedance REC OUT D AUDIO 0 csssssssssssssseessssesssseee 2 2 V TEKO HIGH 1V 10 kQ LOW SUB WOOFER PREOUT esesssssssssssssssssssssssssssesesssseennee 2 2V 10kO E Tuner FM tuner 87 5 MHz to 108 0 MHz 5 Q unbalanced Reception frequency range Antenna impedance AM tuner Reception frequency range 531 kHz to 1 602 kHz E USB Usable USB device esssscsssssssssesssssssesssssseseees USB Mass strage class Interface USB 2 0 Full speed USB 1 1 compatible File system iapa niii FAD 16 32 Playback formats MP3 sampling frequency 8 KHz to 48 kHz Bitrate CBR VBR 32 kbps to 320 kbps WMA WMA9 standard non DRM sampling frequency 32 KHz to 48 kHz Bitrate CBR VBR 64 kbps to 192 kbps ID3 tag Version 1 0 1 1 2 2 2 3 Max folders 11255 Max folder nesting 8 levels Max files 65280 FAT 32
36. e power supply to the system is not shut down completely by simply setting the power switch to OFF To shut down the power supply completely unplug the power cord Getting the best acoustic effect The sound will vary depending on the positioning of the speakers To get the best possible sound quality note the guidelines below Ensure that the areas around the left and right speakers are as identical as possible Set up the left and right speakers away from the wall and hang thick curtains on any windows to minimize echoes or reverberation Position the speakers at the same height as your ears when you are using the system English Connecting the System Main Connections Gautionfor Do not plug the AC power cord into an AC wall outlet until all the connections are completed Canea Before disconnecting any cords or cables always turn the system off and unplug the power cord from the AC wall outlet FM indoor antenna AM loop antenna c gt Connect the lead to the FM75Q terminal Find the location that gives the best reception Secure the antenna as high up as possible See lt Connecting the AC Red adapter gt band j Right speaker Left speaker The speaker cords are connected at the factory con Connecting the System Microcomputer malfunctions ifthe system does not operate normally or shows disp
37. ed from the main unit and the speaker cords are too short you can replace the supplied cords with the following type of commercially available speaker cords AWG24 18 Conductor Diameter 0 511 mm 1 024 mm Strip about 1 cm of the vinyl insulation from the tips of both ends of the replacement speaker cords twist the ends of the wires together so they do not unravel when you connect them Preparing the ends of the speaker cords 5S Twist the plastic sleeve on the end of the cord as you pull it off D gt O Connecting the speaker cords 1 O gt A p Ja Never short circuit the positive and negative ends of the speaker cords Do not touch the and cords together Mistakenly reversing the positive and negative polarity will result in unnatural and unclear sound ax Notes on connecting the speaker cords English Connecting the System Connecting Other Commercially Available Devices When connecting a related system component read the instruction manual that comes with the component too Ensure that all the cords are securely connected Loose or incomplete connections may result in noise interference or no sound at all Since antenna installation requires skill and experience always consult your dealer before installation The antenna should be located away from power lines If the antenna falls over contact with a power line creates the risk of electric shock Opening the front
38. ed on the warranty card and in the space provided below Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product Model Serial Number
39. efore you record the files onto the disc Eyam C 7071 Related Information CD USB Supported Audio Files Page 25 Track Random Playback Mode Page 41 Track Repeat Playback Mode Page 41 Audio Settings gt Page 63 onwards Selecting Track Program Playback Mode You can select the sequence for up to 32 tracks ifthe CD is already playing press the W key to stop playback In folder playback mode you can program the tracks in the currently selected folder Ly File playback mode Press the P MODE key to select programming mode The mode changes as shown below each time you press the key C J Programming mode Canceling programming mode Folder playback mode MP3 WMA Select the folder you want to use for program playback Select using PREV or NEXT Folder 8 selected Press the P MODE key to select program playback mode The mode changes as shown below each time you press the key Cs J Programming mode Canceling programming mode Continued to next page English CD USB r 2 Use the number keys or the ka a and gt keys to select the track or file you want to listen to Program number Track number Track 10 selected as program track 1 Press the ENTER key If you enter the wrong track or file in a program press the ENTER key and then the CLEAR key Return to step 2 and repeat the procedure 4 Ifyou want to selec
40. em HIGH M2GC7 M1GC7 a A connected i M1GC7 Jma When the source is a digital audio player disconnect the digital audio player from the REC OUT terminal before adjusting the recording level C 7071 iPod This section explains how to connect and play back from an iPod nnecting and Playing Back from an iPod Use this procedure to connect an iPod to the system for playback Also refer to the instruction manual that comes with the iPod you are connecting Use the PNC iP120 connecting cable optional accessory to connect an iPod For information about supported iPod models see to page 27 T Connect the PNC iP120 connection cable optional accessory to connect the iPod to the iPod terminal on the main unit s front panel Always turn this system and the iPod off before connecting the iPod 2 Press the iPod gt I1 key to begin playback Perform main operations on the iPod connecting an iPod V Turn off this system and the iPod 2 Disconnect the iPod After you are finished using the iPod disconnect its connection cable from the iPod terminal 7071 iPod Connecting Other Commercially Available Devices Page 16 Supported iPod Models Page 27 NTE Audio Settings gt Page 63 onwards Related E Operations during iPod playback Pausing and resuming playback Press the iPod B gt Il key P
41. er con ting the Program Timer PRO This function allows you to use the timer to start playback automatically at a specified time You can set two timers PROG 1 and PROG 2 at the same time Set the system clock to the correct time before performing this procedure Page 68 If you want the radio to play when the programmed time is reached preset the station before performing this procedure Page 44 Make sure the times for PROG 1 and PROG 2 are different by at least one minute to ensure that their operations do not overlap JV Press the TIMER key Press the lt or gt key Ww Press the ENTER key 2 Select PROG 1 or PROG 2 Press the lt or gt key Press the ENTER key 3 Select ON or OFF Press the lt or gt key Example PROGRAM 1 off Example PROGRAM 1 on Press the ENTER key Selecting OFF ends the operation and returns to the original display Setting the Timer Presetting Stations Page 44 Setting the System Clock Page 68 4 Select the day or days on which the Program Timer will run Press the lt or gt key The mode setting cycles as shown below each time you press a key EVERYDAY f MONDAY TUESDAY WEDNESDAY THURSDAY C gt gt Everyday Monday Tuesday Wednesday Thursday SAT SUN TUE SAT MONFRI SUNDAY SATURDAY FRIDAY Saturday Sunday Tuesdays
42. eration 1 0 or more 1GB 2GB 4GB iPod nano 2nd Generation 1 0 or more 2GB 4GB 8GB iPod video iPod 5th Generation 1 0 or more 30GB 60GB 80GB iPod nano 3rd Generation video 1 0 or more 4GB 8GB iPod classic 1 0 or more Some functions not supported This system supplies power to your iPod which means you can enjoy listening to music while charging your iPod To do this the system must be turned on and iPod must be selected as the source Apple and iPod are trademarks of Apple Inc registered in the U S and other countries English y4 Important Information Notes on transporting or moving the system Before transporting or moving this system take the following actions Disconnect any iPod USB flash memory or USB audio player connected to the main unit If there is a CD loaded in the system remove it Press the CD 1I key and check to make sure that NO DISC appears on the display Wait a few seconds and then turn the system off If there are any other components connected to the system check to make sure they are all turned off before disconnecting the cables Whenever moving the system make sure you hold onto the main unit The main unit may fall if you hold onto the speakers con Procedures by Input Source This chapter explains the operation procedures for each input source For information on the sound quality settings and component settings regardless of the in
43. f a track Press the ka a key once Skipping forward back Hold down the a a key or B gt B gt key Specifying a track number To play the 5th track press the 5 key and then the ENTER key To play the 17th track press the 1 key press the 7 key and then press the ENTER key CD USB Audio Settings Page 63 onwards GENT e Selecting Folder Playback Mode Page 37 Information E Operations during USB playback Pausing and resuming playback Press the USBB gt I key Stopping playback Press the W key Playing the tracks in the previous next folder in Folder Playback mode To go to the previous folder press the PREV key To go to the next folder press the NEXT key Skipping tracks skipping back skipping to the start To skip to the previous or next track Press the ka a key previous or B gt B gt I key next To return to an earlier track Press the ka a key two or more times in succession To return to the beginning of a track Press the ka a key once pping forward back Hold down the lt key or B gt B gt key Specifying a track number To play the 5th track press the 5 key and then the ENTER key To play the 17th track press the 1 key press the 7 key and then press the ENTER key English CD USB play Contents Selecting title display and TAG information display TAG information such as trac
44. g Discs recorded in Mix mode Discs recorded in multiple sessions Discs recorded in mixed formats of CD DA format and non music data formats Mix mode combines the CD DA format with audio files such as MP3 and WMA cron cD Supported Media Page 24 Audio Settings gt Page 63 onwards Information Selecting Track Program Playback Mode Page 39 Related sag Cautions when loading a CD ACD cannot be loaded while the system is in Standby mode Donot try to force a CD into the inlet slot while the system is in Standby mode Doing so can cause malfunction If you experience problems loading a CD pull it out and then re insert it Do not touch the playing surface of the disc Use of an 8 cm CD adapter is not supported If you insert an 8 cm CD so it is off center relative to the inlet slot it will not slide all the way into the slot Take care when using an 8 cm CD Ifa CD is already loaded opening the slide door will eject it T Press the E key to stop playback 2 Slide the slide door cover towards the back panel to eject the CD Sliding the slide door will eject the CD If the CD is playing when you slide the slide door to the back panel playback will stop and the CD will be ejected 3 Slide the slide door towards the front panel to close it WEE e ACD cannot be ejected while the system is in Standby mode Ejecting a CD deletes all program play
45. he recorded folder names and file names may not be displayed correctly Playback for multi session discs or discs that contain large numbers of folders may take longer to begin than for normal discs If you write audio files and music CD tracks CD DA format to the same disc the disc may not play correctly Before writing audio files to a disc check that the files play back correctly on the PC being used to write the files After you finish writing check that the written files are played back correctly Use the correct file extensions mp3 wma in the names of audio files Files without file extensions will not play Also do not use audio file extensions mp3 wma for files that are not audio files For more information on file extensions see lt Supported Audio Files gt on the right c707 Important Information Supported Audio Files On this system you can play the audio file types listed below MP3 WMA which have been recorded with a CD ROM CD R CD RW or USB device MP3 files Number of File Limits File formats MPEG 1 Audio Layer 3 MPEG 2 Audio Layer Max files folders 65280 in total 3 MPEG 2 Audio Layer 3 Lower sampling rate MPEG 2 5 Max folders 255 Extension mp3 Files per folder 256 Sampling frequency 8 kHz to 48 kHz Bit rate 32 kbps to 320 kbps Maximum number of displayable characters File names 32 including file extension WMA files Folder names 32 Tag display Title Album Artist
46. ile playback is in progress Doing so can cause malfunction Never touch the USB device port with your fingers Doing so can cause malfunction USB Supported Media Page 24 Connecting Other Commercially Available Devices Audio Settings Page 63 onwards Related Page 16 Selecting Track Program Playback Mode Page 39 Information Handling USB devices Page 26 connecting a USB device T Press the E key to stop playback 2 Press the E key again 3 When the message REMOVE OK appears disconnect the USB device Disconnecting a USB device deletes all program playback settings Page 39 English CD USB Playback Operations This section explains how to do normal playback in addition to folder playback program playback random playback and repeat playback cron Operations During Playback E Operations during CD playback Pausing and resuming playback Press the CD 1I key Stopping playback Press the W key Playing the tracks in the previous next folder in Folder Playback mode To go to the previous folder press the PREV key To go to the next folder press the NEXT key Skipping tracks skipping back skipping to the start To skip to the previous or next track Press the ka a key previous or m key next To return to an earlier track Press the ka a key two or more times in succession To return to the beginning o
47. input level also changes the volume of the external component connected to the AUX IN terminal C7071 Audio Settings Use the procedures in this chapter to specify the sound quality settings for your stereo system The EX BASS setting can be adjusted for enhanced bass and the SOUND setting can be adjusted to bring out the optimal sound quality of each track EX BASS Enhancing the Bass Range ccececeececeeneceeeeeeees 64 SOUND Adjusting the High Range and Low Rang 0 65 English EX BASS The EX BASS setting can be used to enhance the bass range Enhancing the Bass Range Y Press the EX BASS key The setting changes as shown below each time you press the EX BASS key EX BASS appears EX BASS disappears Turning on EX BASS disables the SOUND function automatically 4 con SOUND Use this setting to adjust the low and right ranges and achieve the type of sound you want justing the High Range and Low Rang Press the SOUND key to select the range level The range being adjusted changes as shown below each time you press the SOUND key BASS low range adjustment TREBLE high range adjustment Returns to normal display after about 5 seconds 2 Adjust the level Use the UP and DOWN keys D BASS TREBLE both can be adjusted within a range of 3 to 3
48. it For information about supported iPod models see page 27 Connect the audio OUT terminals on components such as VCRs to the AUX IN terminal on the rear panel of the main unit 0 VCR etc Audio OUT REC OUT Connect a Kenwood digital audio player with direct encode feature to the REC OUT terminal on the rear panel of the main unit REG OUT REC OUT outputs an analog audio signal Ss ORO sue WOOFER PRE OUT SUB WOOFER PRE OUT Connect a subwoofer such as the optional SW 40HT to the SUB WOOFER PRE OUT terminal on the rear panel of the main unit BI REC OUT sue WOOFER PRE OUT S G E JL Powered Subwoofer Plug headphones equipped with a 3 5 mm stereo mini plug into the PHONES jack on the front panel of the main unit English Component Names and Functions Main unit E Top She seen ewe ai ae a CD EJECT e CD slot Page 30 E Front Standby timer indicator Red Normal standby Orange Timer standby Display Page 19 Cet Remote sensor Page 21 o TUNER CDe n USBE m iPodu INPUTSEL STOPE mea ee I vvoumea I I VOLUME Page 22 a a gt i iPod I Page 56 D AUDIO IN terminal
49. k titles artist names and album names are recorded in audio files The display changes as shown below each time you press the DISPLAY key C Filename TAGtitle gt TAG album name J File number 4 Day Clock 4 TAG artist name Any display for which there is no title or TAG information available is skipped Depending on the settings and specifications of the software used for encoding TAG information may not be displayed correctly Non supported characters are displayed as pound marks If clock settings are not configured the day clock screen is skipped Switching time display contents The display changes as shown below each time you press the TIME DISP key During CD track playback Program playback C Elapsed time for 1 track Remaining time for 1 track J 4 Total remaining time Total elapsed time During random playback repeat playback Elapsed time for 1 track gt Remaining time for 1 track will appear when the time exceeds 400 minutes The elapsed time for only 1 track is displayed 7071 CD USB Supported Audio Files gt Page 25 Audio Settings Page 63 onwards Related Selecting Track Program Playback Mode Page 39 Setting the System Clock Page 68 Meyers Track Random Playback Mode Page 41 Track Repeat Playback Mode Page 41 Selecting Folder Playback Mode This mode plays the files in the selected folder only m d P
50. lable music CDs you also can play discs with MP3 and WMA audio files recorded on them For details see lt Supported Media gt page 24 Playing a CD Load and play the CD ifa disc is already loaded simply press the CDP gt I1 key to turn the system on and begin playback 7 Open the slide door and load the CD Center the CD with the inlet slot with the label side facing towards the front of the main unit Slide door After you inset the CD 3 part way it will be pulled Label automatically the rest of the way in surface 2 Slide the slide door towards the front panel to close it The CD will not play unless the slide door is closed 3 Press the CD gt I1 key Se jouree Elapsed time of Playback indicator current track Track numbers may not display correctly while following types of discs are playing E Discs recorded in Mix mode Discs recorded in multiple sessions Discs recorded in mixed formats of CD DA format and non music data formats Mix mode combines the CD DA format with audio files such as MP3 and WMA c 7071 How to Use This Manual Operation icons Explains the procedure for CDs Explains the procedures for USB devices Related functions that may also be helpful Explains the procedure for the radio Explains the procedure for digital cD audio players Supported Media Page 24 Related
51. lay errors reset the microcomputer Page 81 Connecting the AC adapter Use only the AC 120400A that comes with this product To ensure optimum operation of the system locate the AC adapter as far away as possible from the system AC power cord To AC wall outlet A Do not cover or wrap the AC adapter with cloth blanket or other material AC adapter cautions rane Doing so will result in fire due to excessive heat accumulating in the adapter Connecting the AM loop antenna The antenna supplied with the system is for indoor use Place it as far away as possible from the system your TV set the speaker cords AC adapter and the power cord and point it in the direction that provides the best reception Connecting the antenna cord Connect the AM antenna cord to the AM and Lh GND terminals as shown on the right Connecting the FM indoor antenna The antenna supplied with the system is a basic antenna for indoor use For stable signal reception the use of an outdoor antenna commercially available is recommended Disconnect the indoor antenna first before connecting an outdoor antenna English Connecting the System Detaching and attaching the speakers You can detach the speakers from the main unit and position them as you like Before detaching or attaching the speakers or replacing the speaker cords always turn the system off and unplug the power cord from the AC wall outlet If there i
52. laying the tracks in the previous next album To go to the previous album press the PREV key To go to the next album press the NEXT key Skipping forward back Hold down the lt key or gt gt key iPod Skipping forwards backwards and to the beginning To skip to the previous or next track Press the ka a key previous or B gt B gt I key next To return to an earlier track Press the ka a key two or more times in succession To return to the beginning of a track Press the ka a key once Turning on the backlight Press the DISPLAY key Turns on the iPod backlight for approximately 30 seconds EE The volume level and sound quality settings of the iPod are ignored while it is connected to the system Do not disconnect the iPod while playback is in progress Doing so can cause a malfunction Certain functions may not be supported depending on the iPod model English Biby iPod Mode Random Track Playba This mode plays the tracks on an iPod in random sequence T Press the RANDOM key The mode changes as shown below each time you press the key Track random playback LE Album random playback J Check the iPod display to see the currently selected shuffle mode oan MER This mode is not supported with the iPod classic 6th generation and iPod nano 3rd generation Pressing the ka a key skips back to the beginning of the track being played
53. ld down the DIMMER key for about 2 seconds The setting changes as shown below each time you press the key Display Illumina v Display Dark 707 Auto Power Save Auto Power Save A P S is automatically turns the system off if no operation is performed for 30 minutes after a CD or a USB connected device stops playing 1 Hold down the A P S key for about 2 seconds The setting toggles on and off each time you hold down the key APS appears A P S disappears WEE ifthe input source is TUNER D AUDIO iPod or AUX A P S is triggered whenever the volume is set to zero VOLUME 0 or when MUTE is on When recording to a device connected to the system s REC OUT terminal turn off A P S or set the volume so that it is higher than zero English His Maintenance This chapter explains what to do when error messages appear on the display or when problems arise It also describes how to store and maintain the system so it continues to provide enjoyment for many years to come Messages Ree ea E E EEEE SEE aae ESETE G Troubleshooting csccccccscececsvcvcscvceee 79 rla E T T 73 Care and Storage cecccsscscscscccececeseees OS SPeCifiCAatiOnS cc ccecccocecccecescerecerococresesse Oo English Messages Displayed Message Meaning Can t READ CD disc information cannot be read correctly isa number
54. n unit Clean the disc See lt Care and Storage gt Allow any condensation to evaporate See lt Be careful against condensation gt Close the slide door No sound output Press the CDB gt I1 key Clean the disc See lt Care and Storage gt Playback skips Clean the disc See lt Care and Storage gt Some audio files can t The system will not play audio files that are corrupted be played back Make sure the audio file is supported for playback on 25 the system Delay before playback A large number of folders or files can cause delay prior 25 starts to playback TAG information is not Refer to lt Supported Audio Files gt to check which TAG 25 displayed correctly information can be displayed on this system CD does not eject Slide the slide door towards the back of the main unit to stop playback and eject the disc If this does not cause the CD to eject perform the following procedure to eject it Check that the source is CD If music is playing press the W key to stop playback Slide the slide door towards the back of the main unit to open it Hold down the main unit s ml key for more than two seconds Press and hold the W key until the CD comes all the way out of the main unit If this does not eject the CD request servicing Components connected to the D AUDIO IN terminal Symptoms Solution Ref page The main unit and Use a dedicated cable for co
55. nnection remote control cannot Check whether the connected model is compatible control a Kenwood digital audio player E con Troubleshooting Device connected to the iPod terminal Symptoms Solution Ref page iPod is not recognized Connect with a PNC iP120 iPod connection cable optional accessory Connect the PNC iP120 iPod connection cable securely Check that the iPod model is compatible for playback by the system Cannot control the iPod Disconnect the iPod from the system disconnect all devices from the iPod and then re connect it to the system Check that the iPod model is compatible for playback by the system Poor response iPod response becomes poor when there is a large number of tracks on the iPod This is particularly true when shuffle is turned on for a large number of tracks which can cause poor response of the iPod itself Remote control Symptoms Solution Ref page The remote control Load new batteries does not work Use the remote control within its effective range Resetting the microcomputer Symptoms Solution Microcomputer Reset Procedure Main unit only malfunction the system Turn off the power press the key to enter Standby mode does not work the While holding down the 1 and STOPE keys on the main unit hold display is faulty etc down the main unit s power key until the message CLEAR ALL appears on the display
56. noon displayed as bisuay 12 00 0 00 e9 v Press the ENTER key Ww Set the time Use the lt and gt keys to set the hour The currently set day of the week and time are displayed If you make a mistake repeat the procedure from the beginning If there is a power failure or if the system is unplugged from the wall outlet for some time you must reset the system clock time Pressing the DISPLAY key while the system is in the Standby mode OFF will display the time for 5 seconds E con Setting the Timer A Sleep Timer automatically turns the system off after a set interval while a Program Timer starts playback at a specified time g the Sleep Timer The timer turns the system off automatically after a preset interval You can set an interval from 10 to 90 minutes in 10 minute increments Press the SLEEP key The interval increases by 10 minutes each time you press the key The next setting after 90 minutes is timer off eee Of EDN KI 80 7o 6o displayed Time setting 9 Sleep Timer on The display goes dark and illumination turns off while the Sleep Timer is on While the Sleep Timer is running you can check the remaining time by pressing the SLEEP key E To cancel the Sleep Timer Press the power key to turn the system off Standby or press the SLEEP key so is no longer displayed English 69 Setting the Tim
57. o pause playback Select the track you want to record or pause at the location from which you want to start recording Pages 30 32 34 35 56 E Recording from a digital audio player Press the D AUDIOB I key remote control only to pause playback Select the track you want to record or pause at the location from which you want to start recording Page 48 E Recording from the radio Tune in the station you want to record Page 42 4 Onthe digital audio player perform the required operation to start recording sy Start recording E CD USB iPod Press the CD H USBB gt 11 or iPod 11 key to start playback E Digital audio player Press the D AUDIOB gt I remote control only to start playback E Recording from the radio This step is not required E To stop recording Press the W key Perform the required operation on the connected digital audio player to stop recording E If you notice distortion or if the recorded sound is too low Adjust the recording level Page 54 English D AUDIO Adjusting the Recording Level If you notice distortion or if the recorded sound is too low adjust the output level TV Select the output level Press the REC OUT LEVEL key to toggle between the recording levels When a Kenwood digital audio player is connected to the REC OUT terminal it is recommended that you select the optimal recording level for each device This syst
58. perations and how to play music KENWOOD E Adjusting the volume level v VOLUME a Lowers the Raises the ce volume volume P Raises the volume MUTE Press this key again to unmute the sound con Basic Operation x Check the connections Pages 12 17 Have the remote control ready Page 21 Ifyou plan to use a USB device digital audio player iPod or other external device connect the device to the main unit Pages 16 17 i Pressing the TUNER band CD gt 11 R USB 11 iPod 11 INPUT SEL main unit only D AUDIO IH remote control only or AUX remote control only key will turn on power P O Pressing the power key when the system is on turns it off Standby mode 2 Load a disc CD For other types non CD of playback proceed to step 3 See page 30 for information about how to load a CD 3 Start playback Press the Play Pause key for the input source See lt Procedures by Input Source gt pages 29 62 for details If you are using an external device perform the required operation on the external device to start playback p EE TUNER CDP USB Py iPod gt u INPUT SEL wees 8 8 You can select the sound quality you want See lt Audio Settings gt pages 63 65 for details If the system is not operated for a specified period of time the display
59. put source see lt Audio Settings gt page 63 and lt Component Settings gt page 67 If an error is displayed or a problem arises see lt Maintenance gt page 77 cD Playing aiGD becca san eose euemacsne gen ane A O E E EER e Removing a CD USB e Playing back from a USB device eceeeeeeeneeeee ones 32 Disconnecting a USB device 1 eee eeeeeeeeeceen tence eres 33 CD USB Playback Operations e Operations During Playback sseeseeeeseeererersreren 34 e Switching Display Contents ceeeeceeeeeeeeeeeee eres 36 Selecting Folder Playback Mode sceseeeneeeeeeees 37 e Selecting Track Program Playback Mode bus ok Track Random Playback Mode eceeeeceeneeeeeeees 41 e Track Repeat Playback Mode ssceceeeeceeneeeee ones 41 Receiving Radio Broadcasts e Listening to FM AM Radio e Presetting Stations Clearing All Preset Stations RDS Radio Data System PS Program Service Name Display sceeeeeeeeee 46 Searching for a Desired Program Type PTY Search 66 47 D AUDIO Playing Back from a Digital Audio Player 48 e Disconnecting the Digital Audio Player 49 Adjusting the Input Level cece eeeeceeeeceeeeeeee ones 51 Recording to a Digital Audio Player ceeeeeeeeeees 52 Adjusting the Recording Level cseeeeeeneeeeeeees 54 iPod Connecting and Playing
60. ress the W key to stop playback 2 Press the FOLDER key to select folder playback mode The mode changes as shown below each time you press the key G Odisplayed gt 3 Folder playback mode File playback mode fp Press the PREV or NEXT key to select the folder to be played DIGITAL When folder number 8 is selected Q Press the CD 11 key or the USB II key to begin playback English CD USB E Playback sequence for folders and track files When you play a CD or music from a USB device that contains recorded audio files the track files are played sequentially beginning with the files in the ROOT folder as shown in the figure Sample folder configuration ROOT FO_1 mp3 FO_2 mp3 FO_3 mp3 E Track file playback sequence Track 1 FO_1 mp3 Track 2 FO_2 mp3 Track 3 FO_3 mp3 Folder 2 F1_1 mp3 Track 4 F1_1 mp3 pamp Track 5 F1_2 mp3 Track 6 F2_1 mp3 Track 7 F3_1 mp3 Folder 3 F2_1 mp3 Track 8 Track 11 Track 12 F6_2 mp3 Track 13 F6_3 mp3 Track file name Folder 4 F3_1 mp3 F3_2 mp3 Track file name Folder 5 Track file name Folder 6 F5_1 mp3 F5_2 mp3 Track file name Folder 7 F6_1 mp3 F6_2 mp3 F6_3 mp3 A folder that does not contain any tracks cannot be selected You can specify the playback sequence by adding a number from 01 to 99 at the beginning of each file name b
61. ry information Ejecting a CD deletes all program playback settings Page 39 about procedures English English Hiv What the System Can Do Wide range of recording formats Disc Playback As well as music CDs the system will also play discs containing recorded audio files MP3 WMA Supports USB device connection USB Input Port A USB port supports connection of USB flash memory and USB mass storage class compliant digital audio players Supports iPod connection iPod Input Connector An iPod connector lets you enjoy using the system with your Apple iPod Supports many types of components External Input Terminals An AUX input terminal supports connection of a cassette deck a video deck or other device Kenwood digital audio player support D AUDIO IN terminal This input terminal supports use of a Kenwood digital audio player which can be controlled using the system or remote control Supports recording from a variety of sound sources REC OUT Function Connecting a Kenwood memory audio player provides support of various different sound sources Contents A To ensure safety read the items by this mark carefully Before Using the System Be sure to read these precautions A Safety Precautions a a e RA E 2 A Before Applying Power 2 IMPORTANT SAFETY INSTRUCTIONS RERE deeapeuausedeuseo
62. s a disc in the main unit remove it When only one of the speakers is detached the unit is unstable and can tip over when subjected to vibration or impact Take care whenever detaching or attaching speakers When attaching the speakers make sure they are attached securely Improper installation creates the risk of the speaker falling Detaching the speakers Hooks Remove the speaker cords from the hooks on the back of the main unit 1N mN l From the back of the speaker move it as indicated by the arrow Take care so you do not drop the speaker Detach the speaker from the main unit H Placing a detached speaker on a flat surface Lay the speaker onto the flat surface with the side that attaches to the main unit downwards The side of the speaker that attaches to the main unit has non skid feed The magnets used in the speakers may cause color irregularities on TV or PC screens Do not locate the speakers too close to a TV or PC p con a Y Side that attaches to main unit Connecting the System Connecting the speakers Align the speaker with the main unit so the protrusions in the main unit enter the installation holes of the speaker From the front of the speaker move it as indicated by the arrow Replacing the speaker cords If you want to use the speakers while they are detach
63. s are missing or if the unit is damaged or fails to operate notify your dealer immediately If the unit was shipped to you directly notify your shipper immediately Kenwood recommends that you retain the original carton and packing materials in case you need to move or ship the unit in the future Keep this manual handy for future reference 10 con Installing the System Notes on installing the system Always install the system on a flat stable surface When installing the system ona stand of some sort be sure to check the strength of the stand Do not locate the speakers too close to a TV or PC The magnets used in the speakers may cause color irregularities on TV or PC screens When moving this system be sure to hold onto the main unit Holding onto the speakers can cause the main unit to fall Main unit Left speaker Right speaker Observe the following cautions when installing the system Insufficient heat radiation may A CAUTION ee build up internal heat and cause a malfunction or fire hazard Do not place any object on the system that may hinder heat radiation Leave spaces around the cabinets of the main unit as specified below Top panel 50 cm or more Side panel 10 cm or more Back panel 10 cm or more Install the system so the power outlet is easily accessible and unplug the power cord from the power outlet immediately in case of any trouble Note that th
64. sresedesccondeearsecers 3 How to Use This Manual 06 6 ACCESSO ES A E 10 InstalingtheSys tennie es 11 Connecting the System 12 Component Names and Functions 18 Basic Operation eee ea e AES EA A 22 Important Information Procedures by Input Source gt P 29 This chapter explains how to connect and use the system with the different input sources CD USB CD USB Playback Operations e Receiving Radio Broadcasts RDS Radio Data System D AUDIO iPod e External Components Audio Settings gt P 63 This chapter explains how to tailor the system to your audio preferences EX BASS SOUND Component Settings gt P 67 This chapter explains how to select the settings for the system Setting the System Clock e Setting the Timer Display Settings Auto Power Save Maintenance gt gt P77 This chapter explains how to store and maintain your system so that it continues to give pleasure for many years to come e Messages e Troubleshooting Glossary Care and Storage Specifications English Accessories Check that all accessories are present in the package AM loop antenna 1 FM indoor Remote control Remote control antenna 1 RC FO509E 1 batteries R6 2 Speaker cords AC adapter Power cord 1 50 cm 2 AC 120400A 1 The speaker cords are connected at the factory If any accessorie
65. storage class compliant Consult your retailer to find out whether your USB device is USB mass storage class compliant Maximum current consumption of 500 mA Use of a USB device that does not comply with the above conditions may result in improper playback of track files Even if a USB device does satisfy the above conditions certain device types and conditions may make proper playback impossible This system supplies power to USB devices which means you can enjoy listening to music while charging your device To do this the system must be turned on and USB must be selected as the source Important Information Handling an iPod dling precautions Supported iPod models Be sure to read the instruction manual that comes with To connect an iPod you will need a PNC iP120 iPod the iPod you are using connection cable This system does not come with an iPod It is up to you The following are the iPod models that can be to purchase an Apple iPod separately connected to this system As of November 2007 Certain conditions while using an iPod can cause Controllable iPod iPod Software version contents stored on the iPod to be lost Note that iPod 4th Generation Click wheel 3 02 or more Kenwood will not be held liable for any losses arising 20GB 40GB out of loss of stored contents iPod mini 1 2 or more 4GB 6GB iPod 4th Generation Color display 1 0 or more 20GB 30GB 40GB 60GB iPod nano 1st Gen
66. t Connecting the System gt Increase the volume Cancel the MUTE setting Unplug any headphones plugged into the main unit No sound from the Check that the headphone plug is inserted correctly headphones Increase the volume Cancel the MUTE setting No sound from one of Check all connections as described in lt Connecting the the speakers System gt No time display Set the clock as described in lt Setting the System Clock gt The timer does not Set a start time and end time for the program timer work Tuner Symptoms Solution Ref page No radio reception Connect the antennas Select the correct band reception mode Tune the radio to the frequency of the desired station Move the main unit antenna and AC adapter away from each other Interference noise Install an outdoor antenna away from roads Turn off any electrical appliances that may be causing interference Move the system away from the TV Move the main unit antenna and AC adapter away from each other USB Symptoms Solution Ref page No sound output when Plug in the USB flash memory correctly USB flash memory or Connect the USB cable correctly a USB audio player is Check to make sure the USB audio player is turned on connected English Troubleshooting cD ACD does not play back Load the disc correctly with the label side facing when loaded towards the front of the mai
67. t more tracks repeat steps 2 and 3 You can select up to 32 tracks for playback If you attempt to select more tracks the message PGM FULL appears on the display Press the CD gt 11 key or the USB I key to begin playback PGM appears on the display E To cancel program mode Stop playback and then press the CLEAR key This erases the current program E To remove a track from a program Stop playback and then press the P MODE key Next each press of the CLEAR key will sequentially delete the last track of the program Use the lt and gt keys to select a program number When the number of the track you want to delete is displayed press the CLEAR key E To add a track to the end of the program Stop playback if it is in progress Next perform steps 1 through 5 of the above procedure E Checking the contents of the program Stop playback and then press the ka a or gt key SEE Turning off the system ejecting the CD or disconnecting the USB device erases the current program 40 con CD USB Selecting Folder Playback Mode Page 37 Related Selecting Track Program Playback Mode Page 39 UNE Audio Settings Page 63 onwards ack Random Playback Mode This mode plays the tracks in the current CD or in a folder in a random sequence f PGM is displayed press the CLEAR key while playback is stopped so it disappears from the display
68. while PTY is lit Use program type table for your convenience Program type table Program Type Name Display Program Type Name _ Display Pop Music Pop M Weather Weather Rock Music Rock M Finance Finance Easy Listening Music Easy M Children s programs Children Light Classical Light M Social Affairs Social Serious Classical Classics Religion Religion Other Music Other M Phone In Phone In News News Travel Travel Current Affairs Affairs Leisure Leisure Information Info Jazz Music Jazz Sport Sport Country Music Country Education Educate National Music Nation M Drama Drama Oldies Music Oldies Culture Culture Folk Music Folk M Science Science Documentaty Document Varied Varied d Press the PTY key No sound is heard while PTY is flashing fa program of the desired type is found that program is received and the program type name display changes to the station name display E To cancel the PTY search Press the PTY key MEERA Ifa program of the desired type cannot be found NO PTY flashes then after several seconds the display returns to the original display English RDS Radio Data System 47 D AUDIO You can connect a Kenwood digital audio player referred to hereafter simply as digital audio player to the system and use it to play tracks Use this procedure to connect a digital audio player to the system and play tracks Also refer to the instruction m

Download Pdf Manuals

Related Search

Related Contents

Artwizz Esteem  Attendance Proxy  STEALTH 2.0 Tec Manual - xDEEP Diving Equipment  Documentation du STERIPEN emergency  Sony PEG-S320 User's Manual  Instructivo VUE - Agencia Nacional de Regulación , Control y  the Prowarm™ Single Circuit Water Kit user manual  Philips 4000 series 32PFL4308H 32" Full HD 3D compatibility Black  KiSS Networked Entertainment DP-470 User's Manual  

Copyright © All rights reserved. Failed to retrieve file