Karcher BR VS 400 Vacuum Cleaner User Manual
Contents
1. RM 732 6 291 382 Rotary brush white For thorough cleaning with little soiling or for sensitive floors 1 only 4 762 249 Rotary brush grey Nylon Grit hard For thoroughly cleaning heavily soiled floors 1 only 4 762 252 Rotary brush red high low for structured floors 1 only 4 762 251 Rotary brush black soft for polishing 1 only 4 762 250 Rotary broom light blue soft for carpeting 1 only 4 762 254 Rotary broom horsehair natural for polishing to a mirror finish 1 only 4 762 274 Pad For mounting pads 1 only 4 762 228 Pads green Hard The appliance requires 2x25 20 pieces 6 369 452 10 Pads bright red Medium The appliance requires 2x25 20 pieces 6 369 453 Pads yellow Soft The appliance requires 2x25 20 pieces 6 369 451 Pads white Very soft The appliance requires 2x25 20 pieces 6 369 388 Tank Contents 3 litres For low heights 2 639 080 Tank Contents 10 litres For larger amounts of cleaning agent 2 639 081 Additional weight 7 kg for polishing 5 031 790 Additional weight 12 kg for crystallizing 2 639 193 English FAULT INDICATIONS TECHNICAL DATA No or too little cleaning agent solution on the floor Fill the tank with the cleaning agent solution Check that the tank is firmly fitted Unsatisfactory cleaning results Replace worn rotary brooms Check that the rotary broom or the pads match the application on hand Rotary brushes do not2. cleaner on the rotary brushes English Lay down the rotary brush on the Push the appliance onto the track BR VS 400 USA RECOMMENDED CLEANING AGENTS ACCESSORIES drive side gearing rollers Dismantle the second rotary brush as described Position the cleaner vertically CLEANING AND CARE Only use a damp cloth for cleaning TRANSPORTATION the cleaner Wipe afterwards with a clean dry Note cloth Movement on rollers in inside areas Do not use chemical cleaning and on smooth floors is not agents problematic Take care when moving on non smooth floors and in outside areas PROTECTION FROM FREEZING Store the cleaner in a room protected from freezing If there is a danger of freezing operate the upper lever until no more liquid flows Emptying the tank Fill the tank with warm water max 50 C before taking into use pump has been melted Only operate the upper lever now for measuring out liquid Wait until any ice that may be in the Only use cleaning agents that do not contain solvent hydrochloric acid or hydrofluoric acid Maintenance cleaning also on floors sensitive to alkalis RM 746 6 291 462 Cleaning grease RM 69 ASF 6 291 523 Thorough cleaning stripping of PVC RM 752 6 291 466 Thorough cleaning stripping of linoleum RM 754 6 291 425 Sanitary cleaner RM 68 ASF 6 291 680 Disinfection cleaner
3. turn Remove jammed foreign bodies The appliance is overloaded the overcurrent protection switch triggered allow it to cool down The appliance is operable again after approx 30 s Use rotary brushes suitable for job Mains circuit breaker triggers when the cleaner is switched on Ensure adequate mains fuse protection 15 A time lag or use starting current limiter Switch off other consumers or use other power circuit Cleaner runs unevenly or vibrates heavily Check the proper fit of the rotary brooms Exchange the right for the left hand rotary broom and vice versa Soak the rotary brooms in hot water approx 15 C for approx 80 min If fault cannot be rectified have unit checked by After Sales Service Mains fuse slow 15A Power drive Rated voltage 120 V 1 60HZz Nominal power consumption Total 1 6 kW Brush motor 1 55 kW Spray pump 0 05 kw Area performance theoretical 450 m2 h Brushes Number 2 pieces Diameter 95 mm Tank Capacity 3 Litres option 10 Litres Dimensions and weights Length 530 mm Width 450 mm Height without protective bracket 180 mm Empty weight 30 kg Working width 400 mm Protection class l Noise emission Mean sound level according to IEC 60704 1 70 dB A Machine vibration according to ISO 5349 upper limbs lt 1m s BR VS 400 USA BR VS w 400 2 639 080 0 3 1 Sonderzubeh r oi special accessories USA 2 639 081 0
4. 10 D accessoires speciaux 6 368 310 0 3 1 5 063 650 0 10 1 See 4 4 822 106 0 A D 7 SS k 6 385 783 0 Ss Naa ey eg a2 Sonderzubeh r special accessories accessoires speciaux weleh soft doux 369 452 0 gr n green vert 6 369 453 0 hellrot red rouge 6 369 451 0 gelb yellow jaune ben hard dur 6 369 388 0 welss white blanc fe a A LE weg 4 762 249 0 weiss white blanc 4 762 250 0 schwarz black noir 4 762 251 0 rot red rouge 4 762 252 0 grau grey gris 4 762 254 0 hellblau blue bleu 4 762 274 0 rosshaar horsehair crin de cheval 332 be ul 6 368 196 0 J 5 839 408 0 6 321 028 0 TT 7 321 030 0 6 304 143 0 6 435 341 0 6 435 341 0 7 343 303 0 469 0 BR VS 400 USA y 5 105 267 0 03 03 2000 21
5. NT INFORMATION Please comply with the following points before starting Should you discover anything please notiffy your K rcher sales at 888 253 2648 The voltage listed on the rating plate must correspond to the supply voltage Note To comply with the National Electrical Code NFPA 70 and to provide additional protection from the risk of electric shock this BR 400 should only be connected to the receptacle that is protected by a ground fault circuit interrupter GFCI IMPORTANT SAFTY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING WARNING To reduce the risk of fire electric shock or injury 1 Do not leave appliance when plugged in Unplug from outlet when not in use and before servicing WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK USE INDOORS ONLY 3 Do not allow to be used as a toy Close attention is necessary when used by or near children 4 Use only as discribed in this manual Use only manufacturer s recommended attachments 5 Do not use with damaged cord or plug If appliance is not working as it should has been dropped damaged left outdoors or dropprd into water return it toa service center 6 Do not pull or carry by cord use cord as a handle close a door on cord or pull cord around sharp edges or corners Do not run appliance over cord Keep cord away from heated surfaces 7 Do not unplug by pulling on cord To unplug grasp the plug not the cor
6. YKARCHER BR VS 400 USA e 1 139 108 1 139 308 www karcher com 5 959 333 A2001537 06 01 BR VS 400 USA Operating Instructions Spare Parts List 21 Notice d instructions 12 Liste des pieces de rechange 21 English CONTENTS Important Information 4 Important Safety Instructions 4 GROUNDING INSTRUCTIONS 4 Connect to a properly grounded outlet only Intended use 4 Operating description of the floor cleaner Device elements Assembly for the first time Installing the pushing handle Installing the rotary brushes Install the tank Operation Filling the tank Fitting the plug Set the splash guard Turning the pushing handle Releasing locking the pushing handle Starting stopping the rotary brushes 7 N OO Oo Oo o gt O O1 O1 O1 OO OO Measuring out the cleaning agent 7 Steering the cleaner 7 Changing the rotary brushes 7 Each time before operation Operation Working in a lateral direction Working in lanes Switching off the cleaner Application instructions Application instructions Scrubbing Polishing OO Each time after usage Pull out the plug Emptying the tank Switching off the cleaner Dismantle the roller brushes Transport Cleaning and care Protection from freezing Reccommended cleaning agents Accessories Fault tracing instructions Technical data 10 10 11 10 11 11 BR VS 400 USA English IMPORTA
7. by turning the pushing Tip the pushing handle backwards Check that there are no obstacles handle in the area to be cleaned At the same time go backwards See the Operation Chapter for the slowly description Press the top switch stirrup as required the cleaning agent solution is fed to the rotary brooms OPERATION A WARNING The cleaner must always be in motion during operation Pull the lower lever Tip the pushing handle forwards Rotary brush drive ON The catch locks automatically date Een thie may Working in lanes When necessary push the pushing handles down and turn back to the initial position Note Do not leave the cleaner on the rotary Do not start an unfilled appliance on brushes delicate floors Prior to start up tilt unit activate cleaning agent supply and switch on drive unit for brush rollers Pull the lower lever Press the pushing handle downwards Move the appliance slowly Rotary brush drive ON and turn to the LEFT or RIGHT backwards or forwards in long sweeping movements Press the top switch stirrup as required the cleaning agent solution is fed to the rotary brooms English BR VS 400 USA INSTRUCTIONS FOR USE Polishing Emptying the tank WARNING The cleaner must always be in motion during operation Do not work on one spot as this may damage the floor covering Polishing is carried out without using liq
8. d Do not handle plug or appliance with wet hands 9 Do not put any object into openings Do not use with any opening blocked keep free of dust lint hair and anything that may reduce air flow Gei 10 Keep hair loose clothing fingers and all parts of body away from openings and moving parts 11 Turn off all controls before unplugging 12 Use extra care when cleaning on stairs 13 Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present 14 Connect to a properly grounded outlet only See Grounding Instruction SAVE THESE INSTRUCTIONS BR VS 400 USA GROUNDING INSTRUCTIONS This appliance must be grounded If it should malfunction or breakdown grounding provides a path of least resistance for electric current to reduce the risk of electric shock This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances WARNING Improper connection of the equipment grounding conductor can result in a risk of electric shock Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded Do not modify the plug provided with the appliance if it will not fit the outlet have a proper outlet installed by a qualifi
9. ed electrician This appliance is for use on a nominal 120 volt circuit and has a grounding attachment plug that looks like the plug illustrated in sketchpicture A Make sure that the appliance is connected to an outlet having the same configuration as the plug No adaptor should be used with this appliance CONNECT TO A PROPERLY GROUNDED OUTLET ONLY INTENDED USE 1 Grounded outlet 2 Grounded outlet Box 3 Grounded Pin A We expressly point out that in accordance with the product liability law we are not liable for any damage caused by our units if in the case of use or repair or exchange original KARCHER spare parts are not used and repair is not carried out by a KARCHER service centre or an authorised specialist The same also applies to spare parts and accessories This floor cleaner is designed for cleaning and caring for hard and elastic floor coverings in inside areas Note This unit is suitable for commercial use English OPERATING DESCRIPTION OF THE FLOOR CLEANER DEVICE ELEMENTS The BR VS 400 has two rotary brooms rotating contrary to each other 1 The cleaner can be moved forwards and backwards when in use Work is carried out in a lateral direction large surface area cleaned or in lanes Dirt is removed by the roller brushes and cleaning agent 2 Removed dirt must be cleaned up by a dry wet vacuum cleaner Special rotary brushes accessory are us
10. ed for polishing the floor covering 1 Unlocking thrust clip 2 Water suck off socket accessory 3 Recessed grip 4 Castors 5 Splash guard vertically adjustable 6 Tank fill opening 7 Sliding U shaped protection _ Clip for water pump Clip for brush motor Power cable Strain relief BR VS 400 USA Tank Releasing brushes Support stirrup Brushes Hinge Turning handle for hinged clip FIRST INSTALLATION Install rotary brushes Carefully lay the cleaner down Always use two rotary brushes of the same type Installing the pushing handle Position the lower half of the pushing handle vertically gt d Press the rotary brush down and place it into the thrust bearing Install the second rotary brush as described Check that the rotary brushes are in the correct position Position the cleaner vertically Adjust the upper half of the pushing handle and fix it with the knurled screw Note Do not jam cable when fitting English BR VS 400 USA Install the tank Place the tank on the cleaner Fill the tank with the required amount Hang the power cable in the strain Set the splash guard according to of cleaning agent reliever each application Plug the cable into the power Tighten fastening screw socket Note OPERATION Adjust the splash guard parallel to the floor Fill the tan
11. g Release the upper lever Dismantle the second rotary brush Cleaning agent feed OFF as described Note The cleaning agent feed is effected only if the brush drive is switched on Fit on a new rotary brush with the gearing located on the drive Press down and suspend the rotary brushes Release the lower lever Rotary brush drive OFF Steering the cleaner te 3 D Remove the rotary brushes from the Tip the pushing handle forwards Turn the pushing handle to the LEFT Press the rotary brush down and The catch locks automatically Machine moves to the LEFT gearing place it into the thrust bearing Install the second new rotary brush Turn the pushing handle to the as described RIGHT Check that the rotary brushes are Cleaner moves to the RIGHT in the correct position Position the cleaner vertically English BR VS 400 USA EACH TIME BEFORE OPERATION Working in a lateral direction Switching off the cleaner Check the cleaner and especially the power cable for damage Checked the rotary brushes for the presence of foreign objects Fit the rotary brush that is suitable for the job If necessary top up the cleaning agent solution in the tank Connect the plug to the power cable Hang the strain reliever Plug the cable into the power x Pull the catch upwards and hold Move the cleaner to the LEFT and socket RIGHT
12. k Note Observe the dosing recommendations of the cleaning agent s manufacturer and mix the 3a P cleaning agent solution thoroughly Fill the tank with the required amount Close the catch of fresh water Use a cloth to wipe away excess AN Note liquid that pours out The maximum water temperature Mix the cleaning agent well Take care when handling cleaning must be 50 C agents Comply with the safety Fitting the plug Set the splash guard Turning the pushing handle recommendations of the cleaning agent s manufacturer Rinse splashes in eyes or on the skin out or off with plenty of clean water Call a doctor immediately Wash contaminated clothing with water Place the tank onto the cleaner Connect the plug to the power cable Undo the fastening screw Press the pushing handle Check that the tank is positioned downwards and turn to the LEFT or correctly RIGHT Release strain on the pushing handle and turn it locks in several positions English BR VS 400 USA Releasing locking the pushing Starting stopping the rotary Measuring out the cleaning agent Changing the rotary brushes handle brushes Remove the tank Carefully lay the cleaner down Always refit two rotary brushes of the same type tek Pull the lower lever Lay down the rotary brush on the Press the upper lever Rotary brush drive ON Cleaning agent feed ON drive side gearin
13. uid The brush well must be as dry as possible before the pad is fitted EACH TIME AFTER USAGE Remove the tank empty and rinse with water Instructions for use Pull out the plug Note Prior to using the appliance on delicate surfaces PVC carpets tilt it Switch the cleaning agent feed on Do not operate it until the machine has been filled with cleaning agent Note The cleaning agent feed is effected only if the brush drive is switched on Scrubbing Remove loose dirt by brushing before working with the cleaner Match the amount of cleaning agent solution on the floor covering to the level of dirt Select rotary brushes suitable for the dirt and floor covering Dispose of the cleaning agent solution in accordance with the relevant regulations Heed the instructions of the cleaning agent s manufacturer Pull the power cable out of the socket Disconnect the plug from the power cable Switching off the cleaner Release the pushing handles and tip forwards Dismantle the rotary brushes Note If the machine is not positioned vertically the rotary brushes must be dismantled Remove the tank Carefully lay the cleaner down Press down and suspend the rotary brushes Engage the safety device Remove the rotary brushes from the gearing Position the cleaner vertically Note Do not leave the
Download Pdf Manuals
Related Search