JVC LYT1729-001B Camcorder User Manual
Contents
1. remove the battery pack or disconnect the power supply while the power is on leave the battery pack attached when the camcorder is not in use place naked flame sources such as lighted candles on the apparatus expose the apparatus to dripping or splashing leave dust or metal objects adhered to the power plug or an AC wall outlet Insert any objects in the camcorder e Avoid using the unit 1N places subject to excessive humidity or dust 1N places subject to soot or steam such as near a cooking stove IN places subject to excessive shock or vibration near a television set near appliances generating strong magnetic or electric fields speakers broadcasting antennas etc in places subject to extremely high over 40 C or extremely low under 0 C temperatures e DO NOT leave the unit in places of over 50 C n places where humidity is extremely low below 35 or extremely high above 80 In direct sunlight n a closed car in Summer near a heater in high places such as on a TV Leaving the unit in high places while a cable is connected may result in a malfunction if the cable is caught and the unit falls onto the floor e To protect the unit DO NOT allow it to become wet drop the unit or strike it against hard objects subject it to shock or excessive vibration during transportation keep the lens directed at extrem2. or the SD card is corrupted Use an SD card that is confirmed to operate correctly e Appears when the SD card is full and recording is not possible Delete unnecessary files or replace the SD card VIDEO MANAGEMENT FILE IS DAMAGED RECOVERY IS REQUIRED TO RECORD PLAYBACK RECOVER The video management file is damaged Recovery is required to record or play back video files Select YES then touch the OK button to recover the video management file Checking the Remaining Battery Power Preparation Attach the battery pack For ii mode Press the INFO button twice or the INFO button and then select For 3 mode Press the INFO button INFO BATTERY CONDITION 100 z m S ATE s EE GG min E To return to the normal screen Press the INFO button again e If COMMUNICATING ERROR appears there may be a problem with your battery HSIMSNA In such a case consult your nearest JVC dealer e The recordable time display should only be used as a guide It is displayed in 10 minute units e Pressing INFO button while connecting to PC may launch DVD dubbing Manual Recording Mode Manual recording mode enables you to set focus screen brightness etc manually Press twice NUS Jj MANUAL A AUTO S M MANUAL gt Change the settings in MANUAL SETTING from the MENU Approximate recording time for video Recording SD or SDHC Card medium ULTRA FINE 1 hr 5
3. MEMORY CARD ERROR Turn off the camcorder Remove the SD card and insert it again Turn on the camcorder If the error message appears again replace the card with one that is confirmed to operate correctly Format an SD card when using it for the first time This will also ensure stable speed and operation when accessing the SD card Select FORMAT SD CARD from the MENU Date Time Setting l Open the LCD monitor to turn on the camcorder 2 When SET DATE TIME appears select YES within 10 seconds SET DATE TIME gt pg 4 If you do not select within 10 seconds the screen disappears In such case press the power button 5 and turn the camcorder on again 3 Set the date and time CLOCK ADJUST DATE TIME Dan lt pg 4 Repeat this step to input the day month year hour and minute E To change the date and time 1 Touch the MENU button 2 Select BASIC SETTINGS and then CLOCK ADJUST To return to the previous screen Select 9 E To quit the screen Touch the MENU button HSIMSNA 8 Recording Files Preparation Insert an SD card t Open lens cover e Open the LCD monitor to turn on the camcorder Press the SELECT PLAY REC button to select recording mode PLAY REC CO Slide the mode switch to select vat video or O still image mode ame of W T Zoom Zoom Q Video Recording Press the START STOP button to star
4. 2 11 16 x 4 3 8 Weight Approx 225 g 0 50 Ibs incl grip belt Approx 270 g 0 60 Ibs incl battery and grip belt Operating temperature 0 C to 40 C 32 F to 104 F Operating humidity 35 to 80 Storage temperature 20 C to 50 C 4 F to 122 F Pickup 1 6 680 000 pixels CCD Lens F 1 8 to 3 2 f 2 2 mm to 61 6 mm 28 1 power zoom lens Filter diameter 230 5 mm LCD monitor 2 7 diagonally measured LCD panel TFT active matrix system Speaker Monaural Language English French Spanish Portuguese Japanese Korean Traditional Chinese E For video Audio Format SD VIDEO Recording Playback format Video MPEG 2 Audio Dolby Digital 2 ch Signal format NTSC standard Recording mode video ULTRA FINE 720 x 480 pixels 8 5 Mbps VBR FINE 720 x 480 pixels 5 5 Mbps VBR NORMAL 720 x 480 pixels 4 2 Mbps VBR ECONOMY 352 x 240 pixels 1 5 Mbps VBR Recording mode audio ULTRA FINE 48 kHz 384 kbps FINE 48 kHz 384 kbps NORMAL 48 kHz 256 kbps ECONOMY 48 kHz 128 kbps E For still image Format JPEG Image size 640 x 480 Picture quality 2 modes FINE STANDARD E For connectors AV output Video output 1 0 V p p 75 Q Audio output 300 mV rms 1 KQ USB Mini USB type B USB 2 0 compliant AC Adapter Power requirement AC 110 V to 240 V 50 Hz 60 Hz Output DOV1V So 5 7A Design and specifications subject to change without notice
5. an AC wall outlet other than American National Standard C73 series type use an AC plug adapter called a Siemens Plug as shown For this AC plug adapter consult your nearest JVC dealer Plug Adapter Battery Packs The supplied battery pack is a lithium ion battery Before using the supplied battery pack or an optional battery pack be sure to read the following cautions To avoid hazards do not burn do not short circuit the terminals Keep it away from metallic objects when not in use When transporting make sure the provided battery cap is attached to the battery If the battery cap is misplaced carry the battery in a plastic bag do not modify or disassemble do not expose the battery to temperatures exceeding 60 C as this may cause the battery to overheat explode or catch fire use only specified chargers e To prevent damage and prolong service life do not subject to unnecessary shock Charge within the temperature range of 10 C to 35 C 50 F to 95 F This is a chemical reaction type battery cooler temperatures impede chemical reaction while warmer temperatures can prevent complete charging store in a cool dry place Extended exposure to high temperatures will increase natural discharge and shorten service life fully charge and then fully discharge the battery every 6 months when storing the battery pack over a long period time remove from charger
6. from the MENU Action e Charging may stop in places subject to extremely high low The power charge lamp on the camcorder does not light during charging temperatures to protect the battery It is recommended to charge it in places with a temperature of 10 C to 35 C 50 F to 95 F e When the battery is already fully charged the lamp does not light Check the remaining battery power Recording cannot be e SD card is full Delete unnecessary files or replace the SD performed card e Touch the DISP button once During recording the date time does not appear Digital zoom does not work mode Buipiooey Playback cannot be performed yoeqhe d The focus is not e Set FOCUS to AUTO adjusted automatically Clean the lens and check the focus again e The continuous shooting speed will drop after repeated ae ESA is sl continuous shots depending on the SD card or under Seed Pee SIONI certain recording conditions e To watch images on a TV set the TV s input mode or channel that is appropriate for video playback e Change the settings in ZOOM e Digital zoom is not available in the still image recording 11 HSIMSNA 17 18 Cautions AC Adapter When using the AC adapter in areas other than the USA The provided AC adapter features automatic voltage selection in the AC range from 110 V to 240 V USING HOUSEHOLD AC PLUG ADAPTER In case of connecting the unit s power cord to
7. in the CD ROM that came with your camcorder e PowerCinema NE for Everio The main file managing software You can perform various operations such as file backup playback upload and DVD authoring PowerCinema NE for Everio Browse Videos Scroll right or left to focus on a function and select the function by clicking on the picture e Digital Photo Navigator 1 5 Allows you to change the format of still image files backed up on your PC You can find the latest information on the provided software program at CyberLink s world wide web server at http www2 cli co jp products ne Preparation Quit any other software you are using l Load the provided CD ROM into the PC After a moment the SETUP screen appears If the SETUP screen does not appear double click the CD ROM icon in My Computer 2 Click Easy Installation All provided software are installed on the optimal setting by minimum steps 4 For preffered installation by choosing OVS elem Ael Eaa the desired software destination location and so on Read GUIDEBOOK 3 Click Yes InstallShield Wizard License Agreement Please read the following license agreement carefully Press the PAGE DOWN key to see the rest of the agreement JVC SOFTWARE LICENSE AGREEMENT IMPORTANT TO CUSTOMERS PLEASE MAKE SURE TO READ THIS CAREFULLY BEFORE INSTALLING OR USING THE SOFTWARE PROGRAM NAMED DIGITAL PHOTO NAVIGATOR
8. or powered unit when not in use as Some machines use current even when switched off Terminals ATTENTION The battery you have purchased is recyclable Please call 1 800 8 BATTERY for information on how to recycle this battery Recording Medium SD Card e Be sure to follow the guidelines below to prevent corruption or damage to your recorded data e Do not bend or drop the recording medium or subject it to strong pressure jolts or vibrations e Do not splash the recording medium with water e Do not use replace or store the recording medium in locations that are exposed to strong static electricity or electrical noise e Do not turn off the camcorder power or remove the battery or AC adapter during shooting playback or when otherwise accessing the recording medium e Do not bring the recording medium near objects that have a strong magnetic field or that emit strong electromagnetic waves e Do not store the recording medium in locations with high temperature or high humidity e Do not touch the metal parts LCD Monitor e To prevent damage to the LCD monitor DO NOT push it strongly or apply any shocks place the camcorder with LCD monitor on the bottom e To prolong service life avoid rubbing it with coarse cloth e For safety DO NOT open the camcorder s chassis disassemble or modify the unit allow inflammables water or metallic objects to enter the unit
9. 0 min 3 hr 45 min FINE 5min 10min 21min 43min 1 hr 20 min 2 hr 50 min 5 hr 40 min NORMAL 1 hr 50 min 3 hr 45 min 7 hr 30 min ECONOMY 1 hr 20 min 2 hr 30 min 9 hr 55 min 19 hr 50 min Approximate number of storable images for still image SD or SDHC Card Playing Back Files l Slide the mode switch to select oad video or amp still image mode ame of 2 Press the SELECT PLAY REC button to select playback mode PLAY REC The index screen for videos appears 3 Select the desired file using laser sensor and press OK E Operations during Video Playback Oe gt gt gt o d Return to the first scene of the file Go to the first scene of the next file Return to the index screen Reverse search during playback Frame by frame playback in reverse direction during pause Playback Pause Forward search during playback Frame by frame playback in forward direction during pause Slow playback starts when you keep touching the sensor button under lt i i gt for a while E To check the file information Press the INFO button when playback is paused E To adjust the sound volume of videos VOL Turn down the Ww T volume E E Using on screen buttons Turn up the volume EN To select an on screen button appearing on the left side touch the portion of the sensor next to the on screen button E To s
10. JVC GZ MS90U INSTRUCTIONS CAMCORDER VIDEOCAMARA MANUEL D UTILISATION CAMESCOPE SS UIDOLBY STEREO CREATOR MCT EN MANUAL DE INSTRUCCIONES LYT2046 001A M JOEPIE TONVWdSA Dear Customer Thank you for purchasing this camcorder Before use please read the safety information and precautions contained in pages 2 and 3 to ensure safe use of this product Accessories Getting Started Charging the Battery Pack Insert an SD Card Date Time Setting Recording Files SIVONVHS Checking Remaining Battery Power Playing Back Files Watching Images on TV Installing Software to the PC Connecting the Camcorder to the File Backup File Upload to YouTube Further Information For Future Reference Enter the Model No located on the bottom of the camcorder and Serial No located on the battery pack mount of the camcorder below Model No Serial No Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an
11. ON YOUR PC The right to use the Program is granted by Victor Company of Japan Limited UVC to You only on the condition that You agree to the following Do you accept all the terms of the preceding License Agreement If you choose No the setup will close To install Digital Photo Navigator 1 5 you must accept this agreement 4 Select the desired language and click OK Choose Setup Language FA Select the language for this installation from the choices below z Cancel 9 Click Yes The software installation starts Install CyberLink PowerCinema NE for Everio xj License Agreement F Please read the following license agreement carefully eR d y Sa Press the PAGE DOWN key to see the rest of the agreement End User License Agreement EULA Do not install or use the software until you have read and accepted all of the license terms Permission to use the software is conditional upon your agreeing to the license terms Installation or use of the software by you will be deemed to be acceptance of the license terms Acceptance will bind you to the license terms in a legally enforceable contract with CyberLink Corp SOFTWARE LICENSE AND LIMITED WARRANTY This is an agreement between you the end user and CyberLink Corp CyberLink By x Do you accept all the terms of the preceding License Agreement If you choose No the setup will close To install PowerCinema NE for Everio you must accept th
12. e LLC The operation is possible only with video clips that have been configured for this video sharing website So before you start shooting set upload pre record mode to UPLOAD REC ON pg 8 Preparation Install the software from the included CD ROM c pg 12 e Connect the camcorder to the PC with the USB cable lt pg 13 l Open the LCD monitor to turn on the camcorder 2 Onthe camcorder press the UPLOAD button PowerCinema starts automatically 3 On the PC click on the check box of the desired file The V mark appears on the left of the selected file To select other files repeat this step Delete 4 Click YouTube 5 Login your username and password Click Next To create a YouTube account click Sign up to YouTube Youtiit 6 Select video category and broadcast option Click Next The Video Title is automatically filled in during uploading process with the File name and the Description and Tags with Everio Video references Date information is also input If you want to modify this information sign on to your account on the YouTube website http www youtube com 7 Click on the check box and then click Upload Uploading starts Click Cancel to cancel procedure 0X Copyright Disclaimer 4 Uploading Video to YouTube Uploading MOV001 8 Click Finish t is recommended to use the AC Adapter as the power supply instead
13. elect an on screen button appearing at the bottom of the screen touch the touch sensor under the on screen button you want to select E Operations during Still Image Playback oO oF oa 44 gt p gt Rotate 90 degrees counterclockwise Change playback order of slide show in reverse direction Rotate 90 degrees clockwise Change playback order of slide show in forward direction Return to the index screen Display the previous file Start end the slide show Display the next file Watching Images on TV Preparation Turn off all units AV Jack HSIMSNA DC Jack AV Cable AV Input Jack This camcorder is designed to be used with NTSC type color television signals It cannot be used with a television of a different standard l Turn on the camcorder and the TV 2 Set the TV to its VIDEO mode 3 Only when connecting the camcorder to the VCR DVD recorder Turn on the VCR DVD recorder and set it to its AUX input mode 4 Start playback on the camcorder pg 10 E If the aspect ratio of the image is not correct as shown on the right Change the settings in SELECT TV TYPE from the MENU E To display the camcorder s on screen display on TV Set DISPLAY ON TV to ON from the MENU 11 12 Installing Software to the PC Please read the JVC SOFTWARE LICENSE AGREEMENT in the CD ROM instruction before you install software The following software is included
14. ely bright objects for long periods expose the lens to direct sunlight swing it excessively when using the hand strap swing the soft camcorder case excessively when the camcorder is inside it e To prevent the unit from dropping e Fasten the grip belt securely e When using the camcorder with a tripod attach the camcorder to the tripod securely If the camcorder drops you may be injured and the camcorder may be damaged When a child uses the unit there must be parental guidance Cleaning Before cleaning turn off the camcorder and remove the battery pack and AC adapter E To clean the exterior Wipe gently with a soft cloth If the camcorder is particularly dirty dip the cloth into diluted mild soap and wring it out well before wiping Then wipe again with a dry cloth E To clean the LCD monitor Wipe gently with a soft cloth Be careful not to damage the monitor E To clean the lens Wipe gently with lens cleaning paper e Avoid using strong cleaning agents such as benzine or alcohol e Mold may form if the lens is left dirty e When using a cleaner or chemically treated cloth refer to the cautions for each product HSIMSNA 19 Specifications Camcorder E For general Power supply DC 11 V Using AC adapter DC 7 2 V Using battery pack Power consumption Approx 2 3 W When the monitor backlight is set to STANDARD mode Dimensions W x H x D 54 mm x 68 mm x 111 mm 2 3 16 x
15. equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE NOTES e The rating plate and safety caution are on the bottom and or the back of the main unit e The serial number plate is on the battery pack mount e The rating information and safety caution of the AC adapter are on its upper and lower sides For USA California Only This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material special handling may apply See www dtsc ca gov hazardouswaste perchlorate When the equipment is installed in a cabinet or on a shelf make sure that it has sufficient space on all sides to allow for ventilation 10 cm 3 15 16 or more on both sides on top and at the rear Do not block the ventilation holes If the ventilation holes are blocked by a newspaper or cloth etc the heat may not be able to get out No naked flame sources such as lighted candles should be placed on the apparatus When discarding batteries environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be followed strictly The apparatus shall not be exposed to dripping or splashing Do not use this equipment in a bathroom or places with water Also do not place a
16. g is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped ool NS If this symbol is shown it is only valid in the European Union Declaration of Conformity Model Number GZ MS90U Trade Name JVC Responsible party JVC AMERICAS CORP Address 1700 Valley Road Wayne N J 07470 Telephone Number 973 317 5000 This device complies with Part 15 of FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Changes or modifications not approved by JVC could void the user s authority to operate the equipment This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur i
17. http www cyberlink com english cs support new_site support_index html Sal Toe goCyberlink aixtema de http jp cyberlink com support Troubleshooting The camcorder is a microcomputer controlled device External noise and interference from a TV a radio etc might prevent it from functioning properly The following phenomena are not malfunctions e The camcorder heats up when it is used for a long time e The battery heats up during charging When playing back a video file the image stops momentarily or the sound is interrupted at junctions between scenes Trouble e Connect the AC adapter securely No power is supplied e Detach the battery pack once again and reattach it firmly e Replace the dead battery with a fully charged one e Make sure to use the camcorder under appropriate operating temperatures e The battery is worn out and needs to be replaced Please purchase a new one The power does not turn on or the battery operation time is extremely short even after the battery is fully charged e To solve the problem first follow the instructions below e f the problem is not solved reset the camcorder lt gt below e f the problem persists please consult your nearest JVC dealer E To reset the camcorder 1 Close the LCD monitor to turn off the camcorder and remove the power supply battery pack or AC adapter from the camcorder then reattach it 2 Select FACTORY PRESET
18. is agreement nstallShield lt Back no 6 Click Finish Connecting the Camcorder to the PC Preparation Close the LCD monitor to turn off the camcorder DC Jack USB Jack USB Cable AC Adapter 7 To AC Outlet USB Port e Never disconnect the USB cable while the access charge lamp on the camcorder lights or blinks e Do not turn off the camcorder when the USB cable is connected to prevent malfunctions of the PC e t is recommended to use the AC Adapter as the power supply instead of the battery pack POWER IS OFF OR USB DEVICE IS UNSUPPORTED Appears when an incompatible USB device is connected to the camcorder HSIMSNA 13 14 File Backup File Backup Windows Using Software Video files that have never been backed up onto the connected PC are automatically selected from the back up history and backed up Preparation Install the software from the provided CD ROM lt pg 12 e Connect the camcorder to the PC with the USB cable lt pg 13 When backup is performed folders are created in the MyWorks folder c below and the files are backed up inside those folders Local Disk C File Edit Vie Favorites l Open the LCD monitor to turn on the camcorder 2 On the camcorder select BACK UP then press OK 3 On the PC click EVERIO_SD then click OK F everio_sp E Ready to Backup l Do you want to backup whole data t
19. ith just the AC adapter e Please do not pull or bend the AC adapter plug and cable This may damage the AC adapter mam m 0 E _ d High Exhausted Displays the remaining battery power As the battery power comes close to nil the battery indicators blink When the battery power is exhausted power turns off automatically Insert an SD Card Operations are confirmed on the following SD cards Class 4 or higher compatible SD or SDHC card Panasonic TOSHIBA SanDisk ATP SD card 256 MB to 2 GB or SDHC card 4 GB to 16 GB e f other media are used they may fail to record data correctly or they may lose data that had already been recorded e MultiMediaCards are not supported e Cards used to record video on this camcorder cannot be played back on other devices e Some card readers including internal card readers in PCs may not be able to support SDHC format Please use the camcorder or other SDHC compatible devices to access the card l Close the LCD monitor to turn off the camcorder 2 Open the SD card cover 3 Firmly insert the card with its clipped edge first Bottom of the Camcorder 4 Close the SD card cover E To remove an SD card Push the SD card once After the card comes out a little pull it out Insert and remove the SD card only while the power is turned off Otherwise data on the card may be corrupted e Do not touch the terminal on the reverse side of the label
20. n a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme a la norme NMB 003 du Canada HSIMSNA Read This First Make a backup of important recorded data JVC will not be responsible for any lost data It is recommended to copy your important recorded data to a DVD or other Make a trial recording Before the actual recording of important data make a trial recording and play back the recorded data to check that the video and sound have been recorded correctly We recommend you to use the same recording media when performing both the trial recording and the actual recording Reset the camcorder if it does not operate correctly lt pg 17 Precautions on handling batteries e Be sure to use the JVC BN VF808U VF815U VF823U battery packs e f the camcorder is subjected to electrostatic discharge turn the powe
21. nd Trademarks e Manufactured under license from Dolby Laboratories Dolby and double D symbol are trademarks of Dolby Laboratories e Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and or other countries e Macintosh is a registered trademark of Apple Inc e YouTube and the YouTube logo are trademarks and or registered trademarks of YouTube LLC e Other product and company names included in this instruction manual are trademarks and or registered trademarks of their respective holders IMPORTANT SAFETY INSTRUCTIONS Read these instructions _ Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Only use attachments accessories specified by the manufacturer 10 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 11 Unplug this apparatus during lightning storms or when unused for long periods of time 12 Refer all servicing to qualified service personnel Servicin
22. ny containers filled with water or liquids such as cosmetics or medicines flower vases potted plants cups etc on top of this unit If water or liquid is allowed to enter this equipment fire or electric shock may be caused Do not point the lens directly into the sun This can Cause eye injuries as well as lead to the malfunctioning of internal circuitry There is also a risk of fire or electric shock CAUTION The following notes concern possible physical damage to the camcorder and to the user Carrying or holding the camcorder by the LCD monitor can result in dropping the unit or in a malfunction Do not use a tripod on unsteady or unlevel surfaces It could tip over causing serious damage to the camcorder CAUTION Connecting cables Audio Video S Video etc to the camcorder and leaving it on top of the TV is not recommended as tripping on the cables will cause the camcorder to fall resulting in damage CAUTION The mains plug shall remain readily operable WARNING The battery pack and the camcorder with battery installed should not be exposed to excessive heat such as direct sunlight fire or the like Remember that this camcorder is intended for private consumer use only Any commercial use without proper permission is prohibited Even if you record an event such as a show performance or exhibition for personal enjoyment it is strongly recommended that you obtain permission beforeha
23. o C MyWorks EverioBackup When the progress bar disappears the process is complete File Backup Windows and Macintosh without Using Software Preparation Connect the camcorder to the PC with the USB cable lt pg 13 On the PC create a folder to back up files into 2 Open the LCD monitor to turn on the camcorder 3 On the camcorder select PLAYBACK ON PC then press OK lt ls PLAYBACK ON PC amp CREATE DVD BACK UP gt UPLOAD PLAYBACK DATA ON PC Quit 4 onthe PC Windows Select Open folder to view files using Windows Explorer and click OK EVERIO_SD E e File Edt View Favorites Tools Help Bark Eio Ciz gt J po Search Folders E maso File and Folder Tasks CJ peii ae EXTMOY EI Make a new folder Publish this folder to the a PRIVATE K SD_VIDEO E Share this folder On the PC Macintosh double click EVERIO_SD 5 Select the folder you want to back up and drag amp drop it into the folder you created in step 1 eSD_ VIDEO Folder that contains video files e DCIM Folder that contains still image files Search e g Windows PC File Upload to YouTube This method uses software on the provided CD ROM to perform quick video clip upload to YouTube with a simple one touch operation The presence of YouTube upload functionality in this product is not an endorsement or recommendation of the product by YouTub
24. of the battery pack t takes approx 5 minutes to upload every 1 minute recording of a video clip for uplink speed of 1Mbps e There is no guarantee that the operation will work in all environments or when there are changes in YouTube site in the future HSIMSNA 15 16 Customer Support Information Contact us for Information on the Provided Software Use of this software is authorized according to the terms of the software licence JVC When contacting the nearest JVC office or agency in your country refer to the JVC Worldwide Service Network at http www jvc victor co jp english worldmap index e html about this software please have the following information ready e Product Name e PC e Model Manufacturer e Problem Model Desktop Laptop e Error Message CPU OS Memory MB Available Hard Disk Space GB Please note that it may take some time to respond to your questions depending on their subject matter JVC cannot answer questions regarding basic operation of your PC or questions regarding specifications or performance of the OS other applications or drivers CyberLink Telephone fax support Office hours English German 9 00 am to Germany French Spanish 49 700 462 92375 49 241 70525 25 Italian 5 00 pm oe me mE somes Paid voice support temon me e o pon owe ots S pm CST support new__ site voice _ Support jsp Support web e mail URL e mail address English
25. r off before using it again If a malfunction occurs stop using the camcorder immediately and contact www jvc com or by phone at 1 800 252 5722 Recorded data may be erased while the camcorder is being repaired or inspected Back up all data before requesting repairs or inspections How to Select an Item Using the Touch Sensor An example screen in English is used for the guidance below E g Selecting an item from the menu list on the menu screen WIA amp SHUTTER MODE IMAGE QUALITY GAIN UP 4 BASIC SETTINGS 5 AQ 000Q Touch the MENU button Slide your finger up and down on the sensor Touch the OK button Touch the sensors with your finger The sensors do not function if you touch them with your fingernail or with gloves on On screen function guide The on screen function guide is displayed at the bottom of the screen during menu display etc pe MENU CHANGE EVENT REG EDIT PLAYLIST BASIC SETTINGS CHANGE REGISTERED EVENT 5 Accessories m P 5 or l 5 a AC Adapter Battery Pack Audio Video Cable AP V18U V14U V20U BN VF808U 2 CO Sie USB Cable CD ROM Core Filter lt pg 13 lt pg 12 for USB Cable The core filter reduces interference Make sure to use the provided cables for connections Do not use any other cables Attaching the Core Filter to the USB Cable Attach the core filter to the USB cable The core filter
26. reduces interference Connect the end of the cable with the core filter to the camcorder Release the stopper E Wind once To be connected to the camcorder Read these INSTRUCTIONS to enjoy your CAMCORDER For more details on the operations refer to the GUIDEBOOK in the supplied CD ROM In order to view the GUIDEBOOK Adobe Acrobat Reader or Adobe Reader must be installed Adobe Reader can be loaded from Adobe s web site http www adobe com Select your desired language with a single click The model name is indicated on the bottom of your camcorder 5 Getting Started Charging the Battery Pack l Close the LCD monitor to turn off the camcorder 2 Attach the battery pack Slide the battery pack until it locks in place 3 Connect the AC adapter DC Jack ON Charge lamp AC Adapter To AC Outlet 110V to 240V e The charge lamp blinks to indicate charging has started e When the lamp goes out charging is finished Required charging recording time approx When the monitor backlight is set to STANDARD mode Battery pack Charging time Recording time BN VF808U 5 Provided 1 hr 30 min 2 hr 5 min BN VF815U 2 hr 40 min 4 hr 15 min BN VF823U 3hr 50 min 6 hr 25 min E To detach the battery pack Slide and hold BATT then remove the battery pack E To check the remaining battery power See page 9 You can also use the camcorder w
27. t or stop recording Record standby Ug sh5em ii Recording Still Image Recording Approximate remaining time for recording appears Press and hold the SNAPSHOT E Don t forget to make copies button halfway backup after recording lt pg 14 E To change the aspect ratio of i840 FINE the image 16 9 4 3 o i 7 BS Change the settings in SELECT C ASPECT RATIO from the MENU T The amp indicator becomes green when I L the captured image is focused E To record a video clip approx Press the SNAPSHOT button fully to 10 minutes take the photo picture Before you start recording press UPLOAD button twice to ae 10 FINE 9999 UPLOAD REC ON appears Sr e NOTES e A new file will be created for every 4 GB of continuous shooting e This camcorder records video in MPEG2 E To record still images continuously format compliant with SD VIDEO format Set to CONTINUOUS SHOOTING in This camcorder is not compatible with SHUTTER MODE from the MENU other digital video formats E To view the video image you just recorded Select amp during pause During the preview you can delete the video image by selecting T E To change the picture quality Change the settings in VIDEO QUALITY or IMAGE QUALITY from the MENU CHECK LENS COVER Appears for 5 seconds after power is turned on if the lens cover is closed or when it is dark RECORDING FAILURE The writing speed of SD card is slow
Download Pdf Manuals
Related Search