Insignia NS-CL19C TV DVD Combo User Manual
Contents
1. INSIGNIA Setting up your TV Installing the remote control batteries To install the batteries 1 Open the battery compartment on the back of the remote control 2x AA 2 Insert the two AA batteries provided into the battery compartment Make sure that the and symbols on the batteries match the diagram inside the compartment Using the remote control To use the remote control e Point it directly at the TV within a 30 angle of the IR sensor on the front of the TV and within 20 feet Note Objects between the remote control and the sensor may weaken the remote control s IR signal Range can be diminished by direct sunlight shining on the TV s IR sensor Cautions Do not expose the remote control to liquids direct sunlight or shock The remote control may not work correctly if the TV s IR sensor is under direct sunlight or strong lighting In these cases change the angle of the lighting or the TV screen or operate the remote control closer to the IR sensor Connecting to video sources Connecting to an antenna or cable satellite receiver To connect an external antenna or cable satellite receiver 1 Connect the antenna cable 1 from an antenna 2 or cable satellite receiver 3 to the antenna input jack 4 on the TV Press the INPUT button to set the TV s signal input to TV Notes e To improve picture qual2. 3 The player plays from point A to point B 4 To stop the repeat function press A B again Changing the camera angle Some DVDs contain multiple angles of a scene or sequence If the DVD has only one angle this feature does not work To change the camera angle 1 Press ANGLE repeatedly until the desired camera angle is selected 2 To resume normal playback press ANGLE until the original angle is selected Magnifying the image You can enlarge or reduce the display image while the DVD is playing or while it is paused To magnify the image 1 While a DVD is playing press ZOOM The image is magnified 2x Continue pressing ZOOM to magnify the image 3x then 4x e While the image is magnified press the A y and lt buttons to move the picture on the screen 2 To return to normal picture size press ZOOM until the picture returns to normal Program play To play chapters and titles in a custom order you can create a playback program To program playback 1 Press PROGRAM while a disc is playing to enter Program mode 2 Press the number buttons on the remote control to enter the title and chapter you want to play first The title and chapter number you entered appears in the box 3 The cursor jumps to the next spot in the program list section Make sure the box is highlighted and enter your next title and chapter 4 Continue adding titles and chapters until your program is finished 5 Highlight Start the
3. 19 Combo DVD LCD TV Product that the Product shall be free of defects in the original manufacture of the material or workmanship for a period of one 1 year from the date of your purchase of the Product Warranty Period This Product must be purchased from an authorized dealer of Insignia brand products and packaged with this warranty statement This warranty does not cover refurbished Product If you notify Insignia during the Warranty Period of a defect covered by this warranty that requires service terms of this warranty apply HOW LONG DOES THE COVERAGE LAST The Warranty Period lasts for 1 year 365 days from the date you purchased the Product The purchase date is printed on the receipt you received with the Product WHAT DOES THIS WARRANTY COVER During the Warranty Period if the original manufacture of the material or workmanship of the Product is determined to be defective by an authorized Insignia repair center or store personnel Insignia will at its sole option 1 repair the Product with new or rebuilt parts or 2 replace the Product at no charge with new or rebuilt comparable products or parts Products and parts replaced under this warranty become the property of Insignia and are not returned to you If service of Products or parts are required after the Warranty Period expires you must pay all labor and parts charges This warranty lasts as long as you own your Insignia Product during the Warran
4. TV is turned on and turns red when the TV is in standby mode INSIGNIA Rear view connectors ddl see 7 Description RF 75 ohm antenna connector Headphone jack PC audio input jack Composite video audio input jacks S Video input jack Component YPbPr input jacks VGA video input PC jack Rear view DVD player a Pil A STOP PLAYIPAUSE N openicose N XN D Hd b gt PREV NEXT a UMN o Item Description HB STOP button Press to stop disc playback j PLAY PAUSE button Press to begin playback press again to pause playback press again to resume playback OPEN CLOSE button Press to open the disc tray Press again to close the disc tray lt 4 lt q PREV button Press to go to the previous chapter or track Press again to skip back by chapter or track pp NEXT button Press to go to the next chapter or track Press again to skip forward by chapter or track Remote control Item 10 11 12 13 14 POWER INPUT TV DVD OPEN CLOSE W we C GI amp SCAN MTS SAP SLEEP PICTURE Il Toooals N E O re Caen ole Qs DISPLAY g Ot G QC QA PROGRAM REPEAT N S E SET 8 15 G QO CS i Description POWER button Press to turn the TV on and off INPUT button Press to sele
5. guidance suggested Some material may not be suitable for children PG 13 Parental guidance strongly suggested Some material may not be suitable for children under 13 years of age R Restricted Not suitable for children under 17 years of age unless accompanied by a parent or guardian NC 17 Not suitable for children under 17 years of age X Adults only Rating Description OFF No controls Canadian MPAA Ratings Rating Description E Exempt includes news sports documentaries talk shows C Children English G Children French 8 Children 8 years and above French C8 Children 8 years and above English G General audience English PG Parental guidance suggested 13 13 years old and above French 14 14 years old and above English 16 16 years old and above French 18 Adult programming OFF No controls Can English only Can French only TV Parental Guidelines ratings Rating Description NONE or NR Not rated TV Y All children TV Y7 Children over seven years of age TV G General audiences TV PG Parental guidance suggested TV 14 Parents strongly cautioned TV MA Mature audiences only Some of the age based TV Parental Guidelines ratings also have PG Content based ratings Rating FANTASY VIOLENCE DIALOGUE LANGUAGE SEX VIOLENCE Using the DVD player Playing a DVD To play a DVD 1 Press POWER to turn on the TV 2 Press TV DVD to select DVD 3 He 2
6. label facing forward Clean the disc Moisture has condensed in the player Remove the disc and leave the player on for about an hour Disconnect the power plug for ten seconds then reconnect it If the problem persists contact Insignia or your dealer for help 17 INSIGNIA Maintaining Handling and cleaning the TV DVD Shipping the DVD VCR Please save the original shipping carton and packing materials If you need to ship the TV DVD for maximum protection re pack the it as it was originally packed at the factory Keeping the exterior surfaces clean e Do not use volatile liquids such as insecticide spray near the TV DVD e Do not leave rubber or plastic products in contact with the TV DVD for a long period of time because they can leave marks on the surface Cleaning the case e To clean the player use a soft dry cloth If the surfaces are extremely dirty use a soft cloth lightly moistened with a mild detergent solution e Do not use strong solvents such as alcohol benzine or thinner as these might damage the surface of the player Maintaining the TV DVD This TV DVD is a high tech precision device If the optical pick up lens and disc drive parts are dirty or worn the picture quality could be diminished Depending on the operating environment regular inspection and maintenance are recommended after every 1 000 hours of use For details please contact your nearest authorized service center
7. press pp to skip to the next track Press repeatedly to continue skipping back or forward e To completely stop CD playback press I STOP 6 Press amp OPEN CLOSE to remove the CD Using repeat play You can repeat tracks or the entire CD using repeat play To use repeat play 1 2 While the CD is playing press REPEAT to scroll through the options e Single play current track e Repeat One repeat current track e Repeat Folder repeat current folder e Folder play current folder To stop repeat playback do one of the following e Press REPEAT until Folder disappears from the screen e Press I STOP twice e Eject the CD Changing the audio mode To change the audio output of a multi channel CD During CD playback press AUDIO The setting changes each time you press the button e Mono Left e Mono Right e Mix Mono e Stereo Selecting a track for playback To select a specific track for playback After you load a CD into the player and after the player finishes reading the disc press the number buttons to enter the track number then press PLAY ENTER to play the track Tip If the track number is under 10 press buttons 1 9 to select it If the track number is 10 press 10 once then button 0 to select it If the track number is over 10 press 10 once then a button 1 9 Playing a JPEG disc To play a JPEG disc 1 2 3 Press POWER to turn on the player Press TV DV
8. switches between Folder and Filelist Folder means play the tracks in om folder and Filelist means play all tracks on the isk OPEN CLOSE button Press to open or close the disc tray TV DVD button Press to switch between the current inputs and DVD PICTURE button Press to cycle through the picture modes Personal Standard Mild and Fresh SLEEP button Press to set the sleep timer CCD button Press to select Close Captions modes while in TV mode 10 button If the track or channel number is over 10 press this button once then a button 1 9 MUTE button Press to mute the sound DISPLAY button Press to show TV channel information SUBTITLE button Press repeatedly until the subtitle language you want is selected SETUP button Press to open the DVD Setup menu pp NEXT button Press to go to the next chapter or track Press again to skip forward by chapter or track l PREV button Press to go to the previous chapter or track Press again to skip back by chapter or track HB STOP button Press to stop DVD and CD playback Il PAUSE STEP button Press to pause DVD playback Press again to step through a DVD one frame at a time SLOW button Press to decrease the DVD playback speed SEARCH button Press to go to DVD search mode ZOOM button Press to zoom the DVD display image in on the picture A B button Press to repeat a selected portion of a DVD REPEAT button Press to go to DVD repeat mode
9. you select the amount of time before your TV turns off automatically To set the sleep timer e Press the SLEEP button on the remote control repeatedly until the time duration you want is shown on the screen Options include e SLEEP 240 MIN SLEEP 180 MIN SLEEP 120 MIN SLEEP 90 MIN SLEEP 60 MIN SLEEP 45 MIN SLEEP 30 MIN SLEEP 15 MIN SLEEP 10 MIN SLEEP 5 MIN SLEEP 0 MIN Viewing closed captions To view closed captions e Press the CCD button to toggle the closed captions on or off Setting parental controls Your TV has a V chip that lets you control the type of programs your children can watch Parental controls include two ratings MPAA based on age and TV Parental Guidelines based on content and age A TV program may have an MPAA or TV Parental Guidelines rating so you should set controls for both ratings 11 INSIGNIA Before you can select ratings you need to set up a parental controls password To set up a password 1 Press MENU on the TV or remote control then press VOL VOL to display the FUNCTION menu amp ff Ew FUNCTION INPUT SOURCE TV LANGUAGE ENGLISH CC MODE OFF CC CAPTION CC1 PARENTAL gt BLUE SCREEN ON ASPECT RATIO FULL SCREEN RESET gt 2 Press CH CH to enter the FUNCTION menu and to highlight PARENTAL then press VOL to enter the PARENTAL submenu The PASSWORD box opens PASSWORD 3 Press the number buttons to enter 0000 The PARENTAL menu opens CH
10. C power cord from the AC power outlet before cleaning the product Clean only with a dry cloth Do not use liquid or aerosol cleaners Water and moisture Do not use this product near wet or moist environments such as near a bathtub washbasin sink laundry tub swimming pool or wet basement Do not expose this product to dripping or splashing Do not place objects filled with liquid on this product Shelves and carts Do not place this product on an unstable cart stand tripod or table Unstable installation is likely to make the product fall resulting in serious injuries as well as damage to the product Use only the cart stand tripod bracket or table specified by Insignia or sold with the product When you use a Cart exercise caution when moving the cart and device to avoid injury from them tipping over Ventilation The vents and other openings in the cabinet are designed for ventilation Do not cover or block them because insufficient ventilation can overheat and shorten the product s life span Do not place the product on a bed sofa rug or other soft surfaces because they can block ventilation openings This product is not designed for built in installation Do not place the product in an enclosed place such as a bookcase or rack unless you provide proper ventilation and the manufacturer s instructions are closely followed Fragile The LCD panel used in this product is made of glass and can easily be b
11. CE Contact Insignia For customer service please call 1 877 467 4289 www insignia products com INSIGNIA is a trademark of Best Buy Enterprise Services Inc Distributed by Best Buy Purchasing LLC Insignia 7601 Penn Avenue South Richfield Minnesota U S A 21 INSIGNIA Distributed by Insignia Products Distribu par Insignia Products Distribuido por Insignia Products 7601 Penn Avenue South Richfield MN USA 55423 3645 www Insignia Products com 2007 Insignia Products All rights reserved All other products and brand names are trademarks of their respective owners 2007 produits Insignia Tous droits r serv s Tous les autres produits ou noms de marques sont des marques de commerce qui appartiennent leurs propri taires respectifs 2007 productos Insignia Todos los derechos reservados Todos los demas productos y marcas son marcas comerciales de sus respectivos due os
12. Care and handling of discs Handling discs Do not touch the playback side of the disc Hold the disc by the edges so that fingerprints do not get on the surface Never stick paper or tape on the disc Storing discs After playing store the disc in its case Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight 18 Cleaning discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion Before playing clean the disc with a clean cloth Wipe the disc from the center out O xX Do not use strong solvents such as alcohol benzine thinner commercially available cleaners or anti static spray intended for older vinyl records Note Never operate this product immediately after moving it from a cold location to a warm location Leave it for two or three hours without operating it If you use this product in such a situation it may damage tapes discs or internal parts Specifications Model NS CL19C Picture and sound NTSC system 15W 15W Audio output External input AV PC S Video PC audio YPbPr Antenna Power requirements 120 V 60 Hz Power consumption 80 W Working 41 F 95 F 5 C 35 C Storage 5 F 113 F 15 C 45 C Remote control Batteries two AA User Guide Temperature Accessories Playable discs The following discs and only the following discs can be played in
13. D to select DVD Press 48 OPEN CLOSE to open the disc tray Place the disc in the disc tray then press OPEN CLOSE to close the disc tray The disc navigation menu opens Press y to select the file you want then press PLAY ENTER to confirm The slideshow begins During playback e Press Jj PAUSE STEP on the remote to stop the picture and press PLAY ENTER resume normal play e Press lt PREV to skip to the previous picture and press p p NEXT to skip to the next picture Press repeatedly to continue skipping back or forward INSIGNIA e To completely stop disc playback press i STOP twice 7 Press 4 OPEN CLOSE to remove the disc Customizing TV settings Opening and navigating the on screen menus Using the on screen menu Your TV has an on screen menu that lets you adjust TV settings such as video and audio settings To use the on screen menu 1 Press MENU on the TV or remote control then press VOL VOL to display the menu you want 2 Press CH CH to enter the menu and to highlight option you want then press VOL VOL to change the setting 3 If a submenu is available press VOL to enter the submenu the press VOL VOL to change the setting 4 Press MENU or EXIT to close the on screen menu On screen menus On screen ment Options TUNING CHANNEL The current channel selected Press VOL VOL to change the setting CHANNEL LABEL Lets you add a label to a channel CHANNEL LOCK Lets
14. ILD LOCK MPAA PG RATING PG CONTENTS CAN ENGLISH CAN FRENCH CHANGE PASSWORD 4 Press CH CH to select CHANGE PASSWORD then press VOL to enter the CHANGE PASSWORD submenu 5 Press the number buttons to enter a password 6 Press the number buttons to enter the new password again to confirm Setting the Parental Control level To set the Parental Control level 1 Press MENU on the TV or remote control then press VOL VOL to display the FUNCTION menu of Bw FUNCTION INPUT SOURCE TV LANGUAGE ENGLISH CC MODE OFF CC CAPTION CC1 PARENTAL BLUE SCREEN ON ASPECT RATIO FULL SCREEN RESET gt 2 Press CH CH to enter the FUNCTION menu and to highlight PARENTAL then press VOL to enter the PARENTAL submenu The PASSWORD box opens PASSWORD Press the number buttons to enter your password The PARENTAL menu opens of Sw PARENTAL CHILD LOCK MPAA PG RATING PG CONTENTS CAN ENGLISH CAN FRENCH CHANGE PASSWORD Press CH CH to select the option you want to change then press VOL VOL to change the option Press MENU or EXIT button to close the menu American MPAA ratings Caution Write down your password and save it for future use Note If you forget your password enter 9443 for the old password then enter a new password This password always remains valid for resetting your password Rating Description NONE or NR Not rated G General audiences PG Parental
15. INSIGNIA NS CL19C Insignia NS CL19C 19 Combo DVD LCD TV Contents Welcome send siren teas ERE ERARE heh eden 3 Safety information 3 FH ess id e dire saines 5 ACCOSSONICS EL Ga hor Bree de bea ee ep 5 FTONT VISW oie gar bals dan aah eae eae de dre 5 Rear view connectors 6 Rear view DVD player 6 Remote Control onc esa2ch enter mete etanaene 7 Setting up your TV 8 Installing the remote control batteries 8 Using the remote control 8 Connecting to video sources 8 Using your Thann aate eee aad hale gee 10 Turning the power on and off 10 Changing the volume 10 Changing the video source 10 Changing channels 10 Changing the picture mode 10 Programming channels into memory 11 Displaying status information 11 Adding a channel label 11 Setting the sleep timer 11 Viewing closed captions 11 Setting parental controls 11 Using the DVD player 13 Playing a DVD s cscs erekce dessins 13 Playing a CDi miseen iaei ui Aea ia que 14 Playing a JPEG dISC s gt eraren nee nen G 15 Customizing TV settings 15 Opening a
16. NAL ELECTRICAL CODE NEC ANTENNA GROUND CLAMP ANTENNA DISCHARGE UNIT NEC SECTION 810 20 ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS NEC SECTION 810 21 ELECTRODE SYSTEM NEC ART 250 PART H e For added protection during a lightning storm or when the product is left unattended and unused for long periods of time unplug it from the power outlet and disconnect the antenna This will prevent damage to the equipment due to lightning and power line surges e An outside antenna system should not be located near overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits because contact with them can be fatal Risk of shock To prevent fire or shock hazard do not expose this appliance to rain or moisture CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL INSIGNIA The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock The exclamation poin
17. OPEN CLOSE to open the disc ray 4 Place the DVD in the disc tray then press OPEN CLOSE to close the disc tray The DVD player reads the DVD and displays the opening menu INSIGNIA 5 Press the and y buttons to highlight menu items and press I PLAY PAUSE on the player or PLAY ENTER on the remote to select 6 During playback e Press I PLAY PAUSE on the player or PAUSE STEP on the remote to pause playback Press gt PLAY PAUSE on the player or PLAY ENTER on the remote to resume playback e Press qq to fast review and press pp to fast forward Each time you press the fast reverse or fast forward button the speed changes e Press H to skip to the previous chapter and press pp to skip to the next chapter Press repeatedly to continue skipping back or forward To advance a movie frame by frame press PAUSE STEP then press PAUSE STEPagain Each time you press PAUSE STEP the movie advances by one frame e To play in slow motion press SLOW e To search for a specific scene press SEARCH to open the SEARCH menu press the number buttons to indicate the scene you want e To completely stop DVD playback press i STOP twice 7 Press OPEN CLOSE to remove the DVD Accessing the root DVD menu To access the root DVD menu 1 Press DVD MENU on the remote control 2 Select and change the options you want Note This function is not available on DVDs with multi layer menus Displayi
18. applied for lengthy periods burn in This warranty also does not cover e Damage due to incorrect operation or maintenance e Connection to an incorrect voltage supply e Attempted repair by anyone other than a facility authorized by Insignia to service the Product e Products sold as is or with all faults e Consumables such as fuses or batteries INSIGNIA e Products where the factory applied serial number has been altered or removed REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY INSIGNIA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT INCLUDING BUT NOT LIMITED TO LOST DATA LOSS OF USE OF YOUR PRODUCT LOST BUSINESS OR LOST PROFITS INSIGNIA PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED WILL APPLY AFTER THE WARRANTY PERIOD SOME STATES PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVIN
19. at electricity is available at the AC power outlet Check the volume level and mute settings Switch to another channel to determine if the station is the problem Make sure that the TV is working properly Press the INPUT button to select TV input Make sure the color system is set correctly Check the color control and adjust it Check the program s color features because it may be a black and white movie Make sure that the antenna is installed correctly If not adjust the antenna toward the broadcasting station Check the antenna and its connection If there are problems correct them If all connections are tight the problem may be with a faulty antenna or cable Check whether car traffic or neon signs disturb the image Check for interference from other electronic devices such as radios and televisions and keep magnetic or electronic devices away from the TV Long distance from the station or interfering radio waves can result in bad sound reception If so change the mode to Mono Point the remote control at the TV s IR sensor Change the batteries in the remote control Remove any obstacles between the TV s IR sensor and the remote control Adjust the NOISE REDUCTION function Adjust the Horizontal or Vertical control Make sure that the audio output mode is set correctly Make sure that the audio connection between the unit and amplifier if used is secure Make sure the disc is inserted with the
20. automatically program channels into memory 1 Press MENU on the TV or remote control then press VOL VOL to display the TUNING menu CHANNEL CHANNEL LABEL CHANNEL LOCK SKIP AFC FINE TUNE ANTENNA AUTO PROGRAM 73 12MHZ lt I 2 Press CH CH to enter the TUNING menu and to highlight AUTO PROGRAM then press VOL to enter the AUTO PROGRAM submenu AUTO PROGRAM NO YES 3 Press VOL highlight YES then press MENU to confirm your selection 4 The TV searches and memorizes all channels on the selected antenna input available in your area Note If your TV is connected to cable select CATV in the ANTENNA submenu 5 To stop the auto search press MENU Displaying status information To display status information e Press the DISPLAY button Your TV displays status information such as the channel number or signal source INSIGNIA Adding a channel label To add a label to a channel 1 Press MENU on the TV or remote control then press VOL VOL to display the TUNING menu O TUNING CHANNEL CHANNEL LABEL CHANNEL LOCK SKIP AFC FINE TUNE ANTENNA AUTO PROGRAM 73 12MHZ lt 2 Press CH CH to enter the TUNING menu and to highlight CHANNEL LABEL then press VOL to enter the menu 3 Press VOL VOL to select the position and CH CH to select the letters or symbols to set 4 Press MENU to confirm Setting the sleep timer The sleep timer lets
21. ayed power cords or damaged or cracked wire insulation are dangerous Any of these conditions could result in electric shock or fire Periodically examine the cord of your recorder and if its appearance indicates damage or deterioration unplug it discontinue use of the recorder and have the cord replaced with an exact replacement part by an authorized servicer Protect the power cord from physical or mechanical abuse such as being twisted kinked pinched closed in a door or walked upon Pay particular attention to plugs wall outlets and the point where the cord exits the recorder To disconnect power from the power outlet pull out the power cord plug When installing the product make sure that the plug is easily accessible Important safeguards This product has been designed and manufactured to ensure personal safety Improper use can result in electric shock or fire hazard The safeguards incorporated in this product will protect you if you observe the following procedures in installing using and servicing The internal components of this product cannot be serviced or repaired by the user e Read these instructions Read and understand all operating instructions before operating the product e Keep these instructions These safety and operating instructions must be kept in a safe place for future reference e Heed all warnings All warnings on the product and in these instructions must be closely followed e Fol
22. ct the AV signal input between TV AV S VIDEO PC COMPONENT and DVD SCAN button Press to scan through memorized TV channels ae button Press to select Stereo Mono or SAP mode Number buttons Press to directly enter channel numbers DVD chapter numbers and CD track numbers RECALL button While in TV mode press to return to the previous channel CH buttons Press to skip to the previous or next channel while in TV mode In other modes except DVD mode press to change to TV mode VOL buttons Press to change the volume MENU button Press to open the TV menu Press again to exit EXIT button Press to turn off the on screen display TITLE button Press to display the current DVD title DISPLAY button Press to show information about the DVD playing lt lt REV button Press to fast reverse a DVD gt FWD button Press to fast forward a DVD DVD MENU button Press to open the DVD root menu Item 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 INSIGNIA Description PLAY ENTER button Press to begin disc playback or in menu mode to confirm your selections lt w A Y cursor buttons Press to navigate in on screen menus ANGLE button Press to change the DVD viewing angle AUDIO button Press to change the DVD audio language options PROGRAM button Press to enter DVD program mode In CD mode pressing this button
23. e screen image disappears and the POWER indicator turns red Note A small amount of electric power is consumed even when the power is turned off Changing the volume You can change the volume using the TV s front panel or the remote control To change the volume 1 Press VOL or VOL 2 Press MUTE on the remote control to mute the sound and press it again or the VOL or VOL to restore the sound 10 Changing the video source Your TV supports multiple video sources To select the video source e Press the INPUT button to select from the following input modes e TV AV S VIDEO PC COMPONENT e DVD The name of the input source appears on the screen when it is selected Changing channels To change channels e Press CH or CH To enter a channel number directly e Press the number buttons on the remote control To switch between two channels 1 Press RECALL to change from the currently tuned channel to the previous channel 2 Press RECALL again to change back to the originally tuned channel To scan through memorized channels 1 Press SCAN on the remote control The picture pauses for about two seconds on each memorized channel 2 To stop the Scan function press SCAN again Changing the picture mode To change the picture mode e Press PICTURE on the remote control to cycle through the following modes e PERSONAL e STANDARD e MILD e FRESH Programming channels into memory To
24. ity in a poor signal area you can purchase and install a signal amplifier e To split the signal from an antenna you will need a 2 way signal splitter Connecting to a VCR or other AV source 1 ofan NI OABIA ry l ANTIN T 00 ii ant our EO our outpur R AUDIO L VIDEO SWITCH 3 4 N oo To connect your TV to a VCR or other AV source 1 2 Turn off the TV and the VCR or other source Connect an RCA video cable to the VCR 1 then to the VIDEO IN jack on the back of the TV 2 OR Connect an S Video cable to the VCR then to the S VIDEO jack on the back of the TV Connect RCA audio cables to the VCR s audio output jacks then to the AUDIO L and R jacks on the back of the TV Turn on the TV and the VCR Set the VCR output switch to channel 3 or 4 then tune your TV to the same channel Press the INPUT button to set the TV s signal input to AV or S VIDEO INSIGNIA Connecting to a cable box NI OAGIA Saans NI OIGN R AUDIO L VIDEO OUTPUT w e SWITCH 3 4 ve CE RF Cable To connect your TV to a cable box with an RF cable 1 1 2 Turn off the TV and the cable box Connect a 75 ohm RF cable from the cable box to the ANT IN jack on the back of your TV Set the cable box output switch
25. liquid has spilled on the product or when objects have fallen into the product e When the product has been exposed to rain or water e When the product does not operate normally as described in these operating instructions Do not touch controls other than those described in these instructions Incorrect adjustment of controls not described in these instructions can cause damage which often requires extensive adjustment work by a qualified technician e When the product has been dropped or damaged e When the product displays an abnormal condition Any noticeable abnormality in the product indicates that the product needs servicing Replacement parts In case the product needs replacement parts make sure that the service person uses replacement parts specified by the manufacturer or those with the same characteristics and performance as the original parts Use of unauthorized parts can result in fire electric shock and other danger Safety checks After completion of service or repair work ask the service technician to perform safety checks to make sure that the product is in proper operating condition Wall or ceiling mounting When mounting the product on a wall or ceiling make sure to install the product according to the method recommended by the manufacturer of the mounting or support device Speakers Unplug the AC power cord from the AC power outlet before installing the speakers Cleaning Unplug the A
26. low instructions All operating instructions must be followed e Accessories Do not use attachments or accessories not recommended by Insignia Use of improper accessories can result in accidents e Power source This product must operate on a power source specified on the device label If you are not sure of the type of power supply used in your home ask your dealer or local power company e AC power cord protection The AC power cords must be routed correctly to prevent damage from people stepping on them or from objects resting on them Check the cord connections at the power outlet and where the cord attaches to the product e Overloading Do not overload AC power outlets or extension cords Overloading can cause fire or electric shock e Intrusions and spills Never insert an object into the product through vents or openings High voltage flows in the product and inserting an object can cause electric shock and damage electrical components For the same reason do not spill water or liquid on the product e Servicing Do not attempt to service the product yourself Removing covers can expose you to high voltage and other dangerous conditions Ask a qualified service technician to perform servicing e Repair lf any of the following conditions occur unplug the AC power cord from the AC power outlet then request a qualified service technician to perform repairs e When the AC power cord or plug is damaged e When
27. n press PLAY ENTER to start playing the program 6 To stop the programmed playback press Jj STOP twice during program play Changing the audio options If the DVD was created with multiple language tracks recorded in different languages or multiple sound options you can temporarily change the DVD player s Audio settings To change the audio options 1 Press AUDIO The OSD shows the current audio setting 2 If multiple audio options are available press AUDIO again to select the next audio track Note This feature only works if the DVD was created with multiple audio tracks When you choose an audio language you only temporarily override the audio language setting in the DVD player s main menu Allow a three second interval between selections Tip The audio language can also be changed through the DVD players main menu or the DVD s own audio settings Playing a CD To play a CD 1 Press POWER to turn on the player 2 Press TV DVD to select DVD 3 a OPEN CLOSE to open the disc ray 4 Place the CD in the disc tray then press 2 OPEN CLOSE to close the disc tray The DVD player begins playing the CD 5 During playback e Press I PLAY PAUSE on the player or PAUSE STEP on the remote to pause playback Press PLAY PAUSE on the player or PLAY ENTER on the remote to resume playback e Press lt q to fast review and press pp to fast forward e Press jq lt q to skip to the previous track and
28. nd navigating the on screen menus 15 Using the on screen menu 15 On screen menus 15 Customizing DVD player settings 16 Using the setup menu 16 Changing DVD settings 17 Troubleshooting 17 Maintaining 18 Specifications z2s ss edp ekina a ada 18 L gal Notices os ass spas dene RERA ENTRA 19 1 Year Limited Warranty 21 Fran ais cccccccawusdepeeeeeceos 23 Espa ol arin eink en ce kl a mi 25 Welcome Congratulations on your purchase of a high quality Insignia product Your NS CL15C represents the state of the art in television and DVD player design and is designed for reliable and trouble free performance INSIGNIA Safety information Antenna connections If an outside antenna is connected to the television equipment make sure that the antenna system is grounded to provide protection against voltage surges and built up static electricity charges Section 810 of the National Electrical Code provides information on proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of the grounding conductors location of the antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode EXAMPLE OF ANTENNA GROUNDING AS SPECIFIED BY NATIO
29. ng DVD information To display DVD information e Press DISPLAY on the remote control repeatedly to cycle through Title Elapsed Title Remain Chapter Elapsed Chapter Remain and Display Off Selecting the subtitle language If the DVD was created with subtitles you can change the subtitle language To change the subtitle language 1 Press SUBTITLE repeatedly until the desired language is selected 13 INSIGNIA 2 To remove subtitles press SUBTITLE until Off appears on the screen Note Changing the subtitle language using this method only affects the DVD currently being played When the DVD is removed or the player is turned off the subtitle language reverts to the language setting specified through the DVD player s main menu Tip The subtitle language can also be changed through the DVD player s main menu or the DVD s own subtitle settings Using repeat play You can repeat chapters titles or the entire DVD using Repeat Play To repeat a segment 1 While the DVD is playing press REPEAT to scroll through the options e Chapter repeats the current chapter e Title repeats the current title e All repeats all content on the DVD 2 To stop repeat playback do one of the following e Press REPEAT until ALL disappears from the screen e Press STOP twice e Eject the DVD To repeat selected parts of a DVD 1 Set a starting point by pressing A B 2 Set an end point by pressing A B again
30. ols on page 11 BLUE SCREEN Sets the option to turn on the blue screen if there is no signal for three seconds ASPECT RATIO Selects the aspect ratio of the picture Choices include e FULL SCREEN e 4 3 e 16 9 e ZOOM RESET Restores the settings to factory default On screen meni Options ADJUST AUTO CONFIG Automatically adjusts the Only available in Picture frequency and phase parameters for PC mode use with a PC PHASE Adjusts the phase of the PC image to remove horizontal distortion and sharpen characters CLOCK Adjusts the TFT LCD to match the PC input source clock frequency H POSITION Adjusts the horizontal position of the picture V POSITION Adijusts the vertical position of the picture Customizing DVD player settings Using the setup menu Use your remote control to navigate the setup menu where you can configure DVD player settings To open and navigate the Setup menu 1 Press SETUP on the remote control The General Setup Page opens General Setup Page Tv Display 4 3LB 4 3 Ps Angle Mark On 4 3 Lb Osd Lang ENG 16 9 Caption On Screen Saver Off Hdcd Off Last Memory On 2 Ifnodisc is playing press SETUP again The Preference Page opens Preference Page 1 Kid Saf 2G Password 3Pg Default 4Pg 13 5 Pgr 6R 7 Nc17 8 Adult Parental 3 Press y to highlight a selection or submenu then press to show the options available 4 Press y to select the option setting you
31. ou were viewing when you turn the DVD player off and starts the DVD at that chapter when you turn the DVD player back on TV Type Lets you select the TV output Choices include e NTSC default Standard for America e AUTO Automatically changes based on the DVD in the player e PAL Standard for Europe PARENTAL Lets you set Parental Controls for watching DVDs Initial password is 1234 Options include e 0 ff 1 Kid Safe 2G 5 Pgr 6R 7 Ne 17 e 8 Adult PASSWORD CHANGE Lets you change the password used to set or change Parental Controls The initial password is 1234 Use the number buttons to enter then confirm the new password Note If you forget your password enter 1369 DEFAULT Resets all settings except Parental Controls and the password to factory default Press ENTER to confirm e e e 3Pg e 4Pg 13 e e e INSIGNIA Troubleshooting Please check the following items before asking for repair service Problem No picture or sound Picture is OK but no sound No picture Sound is OK but no color The picture has overlapped images Picture has snow Stripes on picture Bad stereo or SAP sound Remote control does not work Image is not clear Image is not centered Bad sound quality Disc cannot be played The player doesn t operate normally Solution Check all cable connections Make sure that the TV is plugged in and turned on Make sure th
32. roken when the product is dropped or receives an impact If the panel becomes broken exercise extreme caution to prevent injury from the broken glass INSIGNIA Non active pixels The LCD panel contains almost 3 million thin film transistors which provide exceptionally sharp video quality Occasionally a few non active pixels may appear on the screen as a fixed blue green or red point These non active pixels do not adversely affect the performance of your product and are not considered defects Heat sources Do not install this product near any heat sources such as radiators heat registers stoves amplifiers or other devices that produce heat Features Accessories Make sure that the following accessories are provided in the packaging Remote control Batteries two AA User Guide Front view Item LE ORO RORY INPUT MENU VOL VOL CH CH POWER E Description INPUT button Press to select the AV signal input between TV AV S VIDEO PC COMPONENT and DVD MENU button Press to open the main on screen menu VOL buttons Press to decrease or increase the volume CH buttons Press to change the channel POWER button Press to turn on and turn off the TV Remote sensor Receives signals from the remote control Power Indicator LED Turns green when the
33. t within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT CLASSE 1 PRODUIT LASER Caution This product employs a laser system To ensure correct use of this product read this owner s manual carefully and retain it for future reference Should the DVD VCR require maintenance contact qualified service personnel Making adjustments to controls or performing procedures other than those specified herein may result in hazardous radiation exposure To prevent direct exposure to laser beam do not try to open the enclosure DO NOT STARE INTO BEAM Caution Your DVD VCR should not be exposed to water dripping or splashing and no objects filled with liquids such as vases should be placed on the apparatus Caution Class 2M visible and invisible laser radiation when open and interlocks defeated Do not stare into the beam or look at it directly with an optical instrument Caution Most recorder manufacturers recommend their recorders be placed upon a dedicated circuit That is a single outlet circuit which powers only that recorder and has no additional outlets or branch circuits Do not overload wall outlets Overloaded wall outlets loose or damaged wall outlets overloaded extension cords fr
34. the DVD player Discs Label Contents Dimension DVD DVD Audio Video 12cm lt a moving picture CD COMPACT Audio 12cm HDCD Audio 12 cm MPEG 4 Audio Video 12 cm D moving picture JPEG JPEG Video picture 12cm KODAK CD Kodak PICTURE CD COMPATIBLE Video picture 12 cm Discs Label Contents Dimension CD R Audio or Video 12cm CD R moving picture CD RW Audio or Video 12cm CD RW moving picture CD G CD G Audio picture 12cm Legal Notices Macrovision statement This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited Copyright 2007 Insignia Insignia and the Insignia logo are trademarks of Best Buy Enterprise Services Inc Other brands and product names are trademarks or registered trademarks of their respective holders Specifications and features are subject to change without notice or obligation For service and support call 877 467 4289 INSIGNIA 19 1 Year Limited Warranty Insignia Products Insignia warrants to you the original purchaser of this new
35. to channel 3 or 4 then tune your TV to the same channel Turn on the TV and the cable box Change channels at the cable box or with the cable box remote To connect your TV to a cable box with a AV cables 2 1 2 Turn off the TV and the cable box Connect RCA video and audio cables from the cable box to the VIDEO and AUDIO IN jacks on the back of your TV e Yellow Video e White Audio left e Red Audio right Turn on the TV and the cable box Press the INPUT button to set the TV s signal input to AV or S VIDEO Change channels at the cable box or with the cable box remote INSIGNIA Connecting to a computer To connect a computer video source to the VGA jacks 1 Connect a VGA cable from the computer to the VGA IN port on the TV 2 Connect a male to male audio cable from the computer to the PC AUDIO IN port on the TV 3 Turn on the TV then turn on the PC 4 Press the INPUT button to set the TV s signal input to PC See ADJUST on page 16 to adjust the picture Using your TV Turning the power on and off To turn the power on and off 1 Press the POWER button on the front panel of the TV or on the remote control The POWER indicator turns green 2 To turn off the TV press the POWER button again Th
36. ty Period Warranty coverage terminates if you sell or otherwise transfer the Product How TO OBTAIN WARRANTY SERVICE If you purchased the Product at a retail store location take your original receipt and the Product to the store you purchased it from Make sure that you place the Product in its original packaging or packaging that provides the same amount of protection as the original packaging If you purchased the Product from an online web site mail your original receipt and the Product to the address listed on the web site Make sure that you put the Product in its original packaging or packaging that provides the same amount of protection as the original packaging To obtain in home warranty service for a television with a screen 25 inches or larger call 1 888 BESTBUY Call agents will diagnose and correct the issue over the phone or will have an Insignia approved repair person dispatched to your home WHERE IS THE WARRANTY VALID This warranty is valid only to the original purchaser of the product in the United States and Canada WHAT DOES THE WARRANTY NOT COVER This warranty does not cover e Customer instruction e Installation e Set up adjustments e Cosmetic damage e Damage due to acts of God such as lightning strikes e Accident e Misuse e Abuse e Negligence e Commercial use e Modification of any part of the Product including the antenna e Plasma display panel damaged by static non moving images
37. vertical position of the picture Component mode only NOISE REDUCTION Adjusts the quality of the picture OFF LOW MID or HIGH TV AV S VIDEO DVD modes only HUE Adjusts the tone of the picture VOLUME Adjusts the volume of the TV BALANCE Adjusts the right and left speaker volumes BASS Adjusts the low sounds bass Available in Personal mode only TREBLE Adjusts the high sounds treble Available in Personal mode only AUDIO MODE Selects an audio equalization mode for the TV sound PERSONAL VOICE MUSIC or THEATRE AVL Automatic Volume Limit Control Reduces the effect of high volume by limiting volume peaks across all channels INPUT SOURCE Shows the currently selected TV signal source TV AV S VIDEO PC COMPONENT or DVD LANGUAGE Selects the language for the on screen display OSD CC MODE Selects the Closed Captioning mode Options include e OFF Turns off Closed Captioning e ON WHEN MUTE Turns on Closed Captioning when the sound is muted e ON Turns on Closed Captioning CC CAPTION Selects the Closed Caption type for viewing e C1 Turns on Closed Captioning in the primary language of your area e CC2 CC4 Turns on other modes of video related broadcase information in a secondary language e TT1 Turns on the program guide provided by broadcasters e TT2 TT4 Turns on other types of information provided by broadcasters PARENTAL Accesses V chip controls For more information see Setting parental contr
38. want then press PLAY ENTER to confirm 5 To exit the Setup menu press SETUP Changing DVD settings On screen menu GENERAL SETUP PREFERENCE only available when no disc is in the player Options TV DISPLAY Sets the aspect ratio of the TV display e 4 3 PS Pan and Scan may be used with external TVs Widescreen images are shown on the screen but with some parts automatically cut off the ends e 4 3 LB Letter Box use with internal TV Widescreen images are shown on the screen with black bars on the top and bottom of the screen e 16 9 may be used with external TVs Widescreen images fill the entire screen ANGLE MARK Lets you turn the Angle option On or Off If you set this to On you can use the ANGLE button on the remote to select an alternate viewing angle on the DVD OSD Lang Lets you select the language for the On Screen Display OSD CAPTION Lets you turn the caption On or Off SCREEN SAVER Lets you turn on the screen saver which displays when the DVD player is idle for more than three minutes Hdcd Lets you set Hdcd to OFF 1X 2X to switch the CD play mode between Normal CD HDCD with 44 1k HDCD with 88 2K You can play normal CDs when HDCD is set to off You can play 44 1K CDs when HDCD is set to 1X and 88 2K CDs when HDCD is set to 2X to enhance the audio quality Last Memory Lets you turn the last memory option On or Off When set to On the DVD player remembers the chapter that y
39. you lock a channel SKIP Setting this to ON causes the current channel see CHANNEL above to be skipped on the channel list You can select a skipped channel by inputting the channel number using the number keys AFC Auto frequency control Select ON to automatically improve image quality FINE TUNE Use to manually adjust tuning to improve image and sound quality Do not use unless reception is poor ANTENNA Selects the TV antenna source AIR or CATV AUTO PROGRAM Automatically sets up a list of the channels available in your area for the antenna type selected For more information see Programming channels into memory on page 11 15 INSIGNIA On screen menu PICTURE Options may vary in different modes SOUND FUNCTION 16 Options CONTRAST Increases the picture level to adjust the white areas of the picture Decreases the picture level to adjust the black areas of the picture 0 100 BRIGHTNESS Increases the brightness to add more light to dark areas of the picture Decreases the brightness to add more dark to light areas of the picture 0 100 SHARPNESS Increases the sharpness for a cleaner and clearer image Decreases the sharpness for a smoother picture 0 4 COLOR TEMP Adjusts the overall color of the picture NEUTRAL WARM COOL COLOR Adjusts the color saturation of the picture H POSITION Adjusts the horizontal position of the picture Component mode only V POSITION Adjusts the
Download Pdf Manuals
Related Search