IBM 22P6972 Computer Drive User Manual
Contents
1. Hardware and software configuration information for your system If possible be at your computer Your technical support representative might want to walk you through the problem during the call For the support telephone number and support hours by country refer to the following table If the number for your country or region is not listed contact your IBM reseller or IBM marketing representative Response time may vary depending on the number and nature of the calls received Support 24 hours a day 7 days a week Canada Toronto only 416 383 3344 Canada all other 1 800 565 3344 U S A and Puerto Rico 1 800 772 2227 All other countries and regions Go to http www ibm com pc support and click Support Phone List D 2 IBM Multi Burner User s Guide IBM Statement of Limited Warranty Z125 4753 06 8 2000 Part 1 General Terms This Statement of Limited Warranty includes Part 1 General Terms and Part 2 Country unique Terms The terms of Part 2 replace or modify those of Part 1 The warranties provided by IBM in this Statement of Limited Warranty apply only to Machines you purchase for your use and not for resale from IBM or your reseller The term Machine means an IBM machine its features conversions upgrades elements or accessories or any combination of them The term Machine does not include any software programs whether pre loaded with the Machine installed subse2. MPAA to address video piracy but is applicable to any content CSS works by inhibiting the transmission of unencrypted data without proper authorization Playback systems must license CSS to decode the encrypted data The CSS specification divides the world into seven unique regions Content designated for one region cannot be read by playback systems in another region While CSS is used to prevent digital copies of the DVD content another technology devised by Macrovision is used to prevent analog copies of the DVD content The Macrovision standard is a scrambling system widely used by the movie industry to prevent unauthorized duplication of video content using commercial VCRs DVD playback systems must support both CSS and Macrovision copy protection standards The first time that you insert a DVD Video disc into the drive you will be prompted to set the region If you relocate to a different region of the world you can use the DVD Player software to change the region code 1 8 IBM Multi Burner User s Guide Note You can change the DVD region code only five times After you make five region code changes the drive can play only MPEG 2 video titles that are associated with the fifth region code that you set To change the region code do the following Turn on your computer and start your operating system Click Start Select Programs Click Intervideo WinDVD Click Intervideo WinDVD Click the Properties icon to open the Proper
3. EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THESE WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF EXPRESS OR IMPLIED WARRANTIES SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU IN THAT EVENT SUCH WARRANTIES ARE LIMITED IN DURATION TO THE WARRANTY PERIOD NO WARRANTIES APPLY AFTER THAT PERIOD Items Not Covered by Warranty IBM does not warrant uninterrupted or error free operation of a Machine Any technical or other support provided for a Machine under warranty such as assistance via telephone with how to questions and those regarding Machine set up and installation will be provided WITHOUT WARRANTIES OF ANY KIND Warranty Service To obtain warranty service for a Machine contact IBM or your reseller If you do not register your Machine with IBM you may be required to present proof of purchase During the warranty period IBM or your reseller if approved by IBM to provide warranty service provides without charge certain types of repair and exchange service to keep Machines in or restore them to conformance with their Specifications IBM or your reseller will inform you of the available types of service for a Machine based on its country of installation At its discretion IBM or your reselle
4. IBM Le prove effettuate sul presente prodotto hanno accertato che esso rientra nei limiti stabiliti per le le apparecchiature di informatica Classe B ai sensi del Norma Europea EN 55022 I limiti delle apparecchiature della Classe B sono stati stabiliti al fine di fornire ragionevole protezione da interferenze mediante dispositivi di comunicazione in concessione in ambienti residenziali tipici ole 779222 444 ges 722784 SAAMI EE LE JAAA ASM AGUA SOEN EE ESTRES ITAM AS VCCI DEFI ES 771 DMA CT COREL REM CRAT ETA DEE LESS REICHEL CRA ENO E SESS EIC DRAE CIE LURUYKLELTF SEL Japanese statement of compliance for products less than or egual to 20 A per phase CHE E EES E 4 IBM Multi Burner User s Guide Part Number 22P6972 Printed in U S A 1P P N 22P6972
5. a hard disk drive might require a master with slave present jumper setting when another device on the same cable is configured as a slave For more information on setting configuration jumpers on other devices refer to the documentation that comes with your computer Some non IBM computers use special ATA cables with two wires reversed in the device connectors so that the drives can be configured by the cable instead of by jumper position Use the cable select position only for computers that are equipped with these special cables See the documentation that comes with your computer to determine if your ATA adapter requires that you place the jumpers in the cable select position If you place the jumper in the cable select position the IDE cable automatically assigns the master and slave settings based on the position of the drive on the cable You must use the cable select setting for this cabling system whether the drive is the only device or the second device connected to the cable The drive closest to the IDE controller is automatically the master drive Any other devices on the IDE cable must also be set to cable select 1 4 IBM Multi Burner User s Guide Step 4 Mounting the drive in the bay T Attention Be sure to use the M3 x 5 mm mounting screws in the option package when securing screws directly into the drive Using screws that are too long might damage the drive You can mount the drive horizontally or vertical
6. and enforce all of your and IBM s rights duties and obligations arising from or relating in any manner to the subject matter of this Agreement without regard to conflict of law principles Part 2 Country unique Terms AMERICAS BRAZIL Governing Law The following is added after the first sentence Any litigation arising from this Agreement will be settled exclusively by the court of Rio de Janeiro NORTH AMERICA Warranty Service The following is added to this Section To obtain warranty service from IBM in Canada or the United States call 1 800 IBM SERV 426 7378 CANADA Governing Law The following replaces laws of the country in which you acquired the Machine in the first sentence laws in the Province of Ontario UNITED STATES Governing Law The following replaces laws of the country in which you acquired the Machine in the first sentence laws of the State of New York ASIA PACIFIC AUSTRALIA The IBM Warranty for Machines The following paragraph is added to this Section The warranties specified in this Section are in addition to any rights you may have under the Trade Practices Act 1974 or other similar legislation and are only limited to the extent permitted by the applicable legislation Limitation of Liability The following is added to this Section Where IBM is in breach of a condition or warranty implied by the Trade Practices Act 1974 or other similar legislation IBM s liability is limite
7. distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you Any references in this publication to non IBM Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk Trademarks The following terms are trademarks of the IBM Corporation in the United States or other countries or both IBM HelpCenter Microsoft and Windows are trademarks of Microsoft Corporation in the United States other countries or both Intel and Pentium are trademarks or registered trademarks of Intel Corporation in the United States other countries or both Other company product and service names may be trademarks or service marks of others Copyright IBM Corp 2002 E 1 Electronic emissions notices IBM Multi Burner Federal Communications Commission FCC statement Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communicati
8. drivers that are loaded by the CONFIG SYS or AUTOXEC BAT file You need to resolve this device conflict Refer to the documentation that comes with your computer for more information on resolving device conflicts If you are unable to access the disc you might have a hardware problem If you are unable to read the disc or a drive letter is not assigned by MSCDEX go to the next step 9 Turn off the computer unplug the cables from the electrical outlets for your computer and all attached devices and remove the computer cover 10 Disconnect the IDE and power cables for all IDE devices except the Multi Burner 11 Configure the Multi Burner as a master and connect it to the last IDE connector on the primary IDE port 12 Reinstall the computer cover Reconnect the keyboard plug the power cords into electrical outlets 13 Insert the system diskette in the diskette drive and a data disc in the Multi Burner B 2 IBM Multi Burner User s Guide 14 Restart the computer 15 Attempt to read the disc by typing dir C the Multi Burner is drive C because it is the only device that is connected to the IDE port If the computer is able to read the disc a conflict probably exists with one of the devices that are installed on your computer You need to resolve this device driver conflict Check the configuration jumper settings for the other devices or refer to our device documentation If you are unable to access the disc you migh
9. menu enables you to drag buttons to the menu When you have created your DVD video click the DVD icon in the authoring application to record your video to the hard disk drive DVD R DVD RW or DVD RAM media If you create a layout in the hard disk drive you can copy it to DVD RAM DVD RW or DVD R media later using the drag and drop method A DVD video that is recorded directly to DVD R media can be played back in almost any DVD player or computer DVD videos recorded on DVD RAM or DVD RW media can be played back in DVD RAM drives DVD Multi Player ROM drives and some DVD video players If you use VideoWave to create a DVD video layout on your hard disk you can use RecordNow to record files on a DVD R that will play in most DVD players and computers with DVD ROM drives Maintaining the drive This section includes information on taking care of your drive and the CDs and DVDs that you use with the drive Caring for a CD or DVD Digital discs are high density media that must be handled with care and kept clean to ensure that they remain readable The following precautions help to prolong the life of your discs Attention Wiping a disc using a circular motion can damage the disc and cause data loss Handle the disc by the edges or the center hole Do not touch the surface of the disc To remove dust or fingerprints wipe the disc from the center to the edge with a soft lint free cloth Do not write on the surface of t
10. sections Handling precautions Use the following handling precautions to protect your drive Keep the Multi Burner in the antistatic bag until you are ready to install the drive Limit your movement when installing movement can cause static electricity to build Handle the drive with care Dropping or jarring the drive can damage the components inside the drive Do not force insertion of the IDE or power cables Doing so might damage the connector or the drive 1 2 IBM Multi Burner User s Guide Drive controls and connectors The following diagrams show the location and functions of the drive controls and connectors Front view of the drive A El E Disc drawer This drawer is where you load and unload a disc H Busy indicator This light comes on when the drive reads from writes to or plays a disc Emergency eject hole This hole provides access to the eject mechanism to remove a disc from the drive El Open Close button This button opens and closes the disc drawer when you push it Rear view of the drive Pin 1 A oo oo a N Reserved FA Audio out connector This connector transmits the analog audio signals to an audio adapter Configuration pins These pins are used to set the drive configuration EI IDE port This connects the drive to the IDE cable H Power connector This connects the drive to the power cable In
11. to conflict of law principles Any disputes arising from or in connection with this Agreement will first be resolved by friendly negotiations failing which either of us has the right to submit the dispute to the China International Economic and Trade Arbitration Commission in Beijing the PRC for arbitration in accordance with its arbitration rules in force at the time The arbitration tribunal will consist of three arbitrators The language to be used therein will be English and Chinese An arbitral award will be final and binding on all the parties and will be enforceable under the Convention on the Recognition and Enforcement of Foreign Arbitral Awards 1958 The arbitration fee will be borne by the losing party unless otherwise determined by the arbitral award During the course of arbitration this Agreement will continue to be performed except for the part which the parties are disputing and which is undergoing arbitration EUROPE MIDDLE EAST AFRICA EMEA THE FOLLOWING TERMS APPLY TO ALL EMEA COUNTRIES The terms of this Statement of Limited Warranty apply to Machines purchased from IBM or an IBM reseller Warranty Service If you purchase an IBM Machine in Austria Belgium Denmark Estonia Finland France Germany Greece Iceland Ireland Italy Latvia Lithuania Luxembourg Netherlands Norway Portugal Spain Sweden Switzerland or United Kingdom you may obtain warranty service for that Machine in any of those countries
12. 002 vii viii IBM Multi Burner User s Guide Installation and user s guide This section contains the product description hardware and software installation instructions and operating information for the IBM Multi Burner Product description This option package is intended for multimedia applications The drive comes with a CD containing MPEG 2 decoder software for the following operating systems Microsoft Windows 2000 Professional e Microsoft Windows Millennium Edition Me Microsoft Windows XP In addition to this User s Guide provided on the IBM Multi Burner User s Guide and Software Disc 1 your option package contains the following IBM Multi Burner Media Pak containing one 4 7 gigabyte GB DVD RAM disc one 4 7 GB DVD RW disc one 4 7 GB DVD R disc e IBM Multi Burner User s Guide and Software Disc 2 Four mounting screws M3 x 5 mm slotted e Internal audio Y cable e IBM Multi Burner Quick Start Guide e Laser Safety Guide Contact your place of purchase if an item is missing or damaged Be sure to retain your proof of purchase it might be required to receive warranty service EE page D ilfo technical support information Your Multi Burner is compatible with the DVD Forum DVD Multi Recorder specification and can record as well as read DVD RAM DVD RW and DVD R for General 650 nm media Your drive can also record CD R CD RW and High Speed CD RW media and uses buffer underrrun prevent
13. 4 Telephone 1 919 543 2193 Tested To Comply C With FCC Standards FOR HOME OR OFFICE USE Industry Canada Class B emission compliance statement This Class B digital apparatus complies with Canadian ICES 003 Avis de conformite a la reglementation d Industrie Canada Cet appareil num rique de la classe B est conforme la norme NMB 003 du Canada Deutsche EMV Direktive electromagnetische Vertraglichkeit Zulassungbescheinigunglaut dem Deutschen Gesetz ber die elektromagnetische Vertr glichkeit von Ger ten EMVG vom 30 August 1995 bzw der EMC EG Richtlinie 89 336 E 2 IBM Multi Burner User s Guide Dieses Ger t ist berechtigt in Ubereinstimmungmit dem Deutschen EMVG das EG Konformit tszeichen CE zu fithren Verantwortlich fiir die Konformit tserkl rung nach Paragraph 5 des EMVG ist die IBM Deutschland Informationssysteme GmbH 70548 Stuttgart Informationen in Hinsicht EMVG Paragraph 3 Abs 2 2 Das Ger t erf llt die Schutzanforderungen nach EN 50082 1 und EN 55022 Klasse B EN 50082 1 Hinweis Wird dieses Ger t in einer industriellen Umgebung betrieben wie in EN 50082 2 festgetlegt dann kann es dabei eventuell gest rt werden In solch einem FA11 ist der Abstand bzw die Abschirmungzu der industriellen St rquelle zu vergr ern Anmerkung Um die Einhaltung des EMVG sicherzustellen sind die Ger te wie in den IBM Handbtichern angegeben zu installieren und zu betreiben E
14. IBM Multi Burner User s Guide tl IBM Multi Burner User s Guide tl Note Before using this information and the product it supports be sure to read the information under Appendix D Warranty information on page D 1 and Appendix E Notices on page E 1 Second Edition August 2002 O Copyright International Business Machines Corporation 2002 All rights reserved US Government Users Restricted Rights Use duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp Contents Safety Read first About this book Registering your product Installation and user s guide Product description Software description Installation requirements Before you begin Handling precautions Drive controls and connectors Installing the drive Step 1 Opening the computer d Step 2 Unpacking the drive o Step 3 Setting the configuration j jumpers Step 4 Mounting the drive in the bay Step 5 Attaching the cables to the drive Step 6 Completing the hardware installation Step 7 Installing the software Using the drive Using single and double sided DVD RAM media Removing the disc from the cartridge Using the drive with CDs and DVDs Securing a disc in a vertically mounted drive Manually ejecting a disc Using the DVD Player software Before using the software Using the DVD Player Changing the DVD region code Using drive letter access DLA Using roxio Vid
15. Limited Warranty for IBM Machines a glossary of terms used in the Statement of Limited Warranty Frequently Asked Questions FAQ and links to Product Support Web pages The IBM Statement of Limited Warranty is available from this Web site in 29 languages in Portable Document Format PDF Online technical support Online technical support is available during the life of your product through the Personal Computing Support Web site at http www ibm com pc support During the warranty period assistance for replacement or exchange of defective components is available In addition if your IBM option is installed in an IBM computer you might be entitled to service at your location Your technical support representative can help you determine the best alternative Telephone technical support Installation and configuration support through the IBM HelpCenter will be withdrawn or made available for a fee at IBM s discretion 90 days after the option has been withdrawn from marketing Additional support offerings including step by step installation assistance are available for a nominal fee To assist the technical support representative have available as much of the following information as possible Option name Option number Proof of purchase Computer manufacturer model serial number if IBM and manual Exact wording of the error message if any Description of the problem Copyright IBM Corp 2002 D 1
16. all situations involving nonperformance by IBM in respect of the subject matter of this Statement of Warranty will be limited to the charge paid by you for the individual Machine that is the subject of your claim from IBM UNITED KINGDOM Limitation of Liability The following replaces items 1 and 2 of the first paragraph of this Section 1 death or personal injury or physical damage to your real property solely caused by IBM s negligence 2 the amount of any other actual direct damages or loss up to 125 percent of the charges if recurring the 12 months charges apply for the Machine that is the subject of the claim or which otherwise gives rise to the claim The following item is added to this paragraph 3 breach of IBM s obligations implied by Section 12 of the Sale of Goods Act 1979 or Section 2 of the Supply of Goods and Services Act 1982 Applicability of suppliers and resellers unchanged The following is added to the end of this Section IBM s entire liability and your sole remedy whether in contract or in tort in respect of any default shall be limited to damages Appendix D Warranty information D 9 D 10 IBM Multi Burner User s Guide Appendix E Notices IBM may not offer the products services or features discussed in this document in all countries Consult your local IBM representative for information on the products and services currently available in your area Any reference to an IBM product program
17. d to the repair or replacement of the goods or the supply of equivalent goods Where that condition or warranty relates to right to sell quiet possession or clear title or the goods are of a kind ordinarily acquired for personal domestic or household use or consumption then none of the limitations in this paragraph apply Governing Law The following replaces laws of the country in which you acquired the Machine in the first sentence laws of the State or Territory CAMBODIA LAOS AND VIETNAM Governing Law The following replaces laws of the country in which you acquired the Machine in the first sentence laws of the State of New York The following is added to this Section Disputes and differences arising out of or in connection with this Agreement shall be finally settled by arbitration which shall be held in Singapore in accordance with the Appendix D Warranty information D 5 rules of the International Chamber of Commerce ICC The arbitrator or arbitrators designated in conformity with those rules shall have the power to rule on their own competence and on the validity of the Agreement to submit to arbitration The arbitration award shall be final and binding for the parties without appeal and the arbitral award shall be in writing and set forth the findings of fact and the conclusions of law All proceedings shall be conducted including all documents presented in such proceedings in the English language The number
18. diction of the English courts and 5 in Greece Israel Italy Portugal and Spain any legal claim arising out of this Statement will be brought before and finally settled by the competent court of Athens Tel Aviv Milan Lisbon and Madrid respectively THE FOLLOWING TERMS APPLY TO THE COUNTRY SPECIFIED AUSTRIA AND GERMANY The IBM Warranty for Machines The following replaces the first sentence of the first paragraph of this Section The warranty for an IBM Machine covers the functionality of the Machine for its normal use and the Machine s conformity to its Specifications The following paragraphs are added to this Section The minimum warranty period for Machines is six months In case IBM or your reseller is unable to repair an IBM Machine you can alternatively ask for a partial refund as far as justified by the reduced value of the unrepaired Machine or ask for a cancellation of the respective agreement for such Machine and get your money refunded Extent of Warranty The second paragraph does not apply Warranty Service The following is added to this Section During the warranty period transportation for delivery of the failing Machine to IBM will be at IBM s expense Limitation of Liability The following paragraph is added to this Section The limitations and exclusions specified in the Statement of Limited Warranty will not apply to damages caused by IBM with fraud or gross negligence and for express warranty The foll
19. e Align the cable so that the color coded edge is closest to the power cable connector RH Use the IDE cable that is provided with this option if there is no cable attached to the IDE port or if there is only one device connector on the computer IDE cable The IDE cable can have up to three connectors For the best signal quality when you are connecting only one device to the IDE cable connect one end of the cable to the IDE port and connect the other end of the cable to the device Do not use the middle connector Installation and user s guide 1 5 If you are connecting two devices to the IDE cable connect one end of the cable to the IDE port and connect the master and slave devices to the remaining connectors on the other end Many computers have two cables for attaching up to four ATA devices For best performance attach fast devices hard disk drives to the cable that is connected to the primary IDE port and connect the drive or other slower devices CD ROM drives tape drives diskette drives to the cable that is connected to the secondary IDE port 4 Attach a four pin power cable BJ to the power connector on the drive Be sure that the cables will not be pinched or crowded by the computer cover and that all other cable and power connections are secure Step 6 Completing the hardware installation 1 Ensure that the drive is securely mounted and that the connectors are firmly attached 2 Ensure that the cables do not interfere wi
20. eate MP3 CDs and author data CDs You can also use RecordNow to write data to DVD R and DVD RW discs for use in other computers or compatible consumer electronics products IBM Simple Backup This software enables you to create full or incremental backups of your system files on DVD RAM DVD RW DVD R CD R or CD RW media and allows you to restore your computer if it crashes Intervideo WinDVD This software enables you to play back DVD videos on your computer or to play video files from your hard disk drive Note Some graphics adapters such as the FIREGL Intergraph and 3dLabs do not support DVD video playback Installation requirements Be sure that your computer meets the following system requirements before installing the drive Minimum microprocessor Intel Pentium or equivalent Note For DVD authoring and playback you must have an Intel Pentium H 266MHz microprocessor or higher and AGP 2X Video Minimum RAM 32 MB Systems with UMA 64 MB Windows 2000 Professional Windows Me or Windows XP An available 5 25 in drive bay An available IDE connection 120 MB available hard disk space for programs and 1 GB available hard disk space for DVD authoring functions Screen resolution of 1024 x 768 pixels required for DVD authoring functions Audio adapter supporting 44 1 or 48 kHz sampling rate Optional stereo speakers Before you begin Before you install the Multi Burner read the information in the following
21. eeds Media Write speeds DVD R for general 650 nm 2X CLV DVD RW Version 1 1 1X CLV DVD RAM Version 2 1 4 7 9 4 GB 2X ZCLV CD R 12X CLV CD RW 8X CLV A 2 IBM Multi Burner User s Guide Appendix B Problem solving Computer problems can be caused by hardware software or human error Using the information in this section you might be able to solve problems yourself or gather helpful information to pass on to a service technician You might also need to refer to your computer operating system or sound adapter documentation Review the following list for any problem descriptions that might fit your situation Your computer or drive does not operate correctly or the busy indicator light does not turn on Take the following actions 1 2 3 Check that the disc is label side up in the drive Check that all devices are properly connected to the computer and to an electrical outlet Turn off the computer unplug the cables for your computer and all attached devices and remove the computer cover Check that all power and IDE cables are securely attached Disconnect the IDE cable and check it for bent or misaligned pins If you do not find any reconnect the cable Replace the computer cover and reattach all cables and power cords Turn on the computer restart the operating system and press the Open Close button If the tray fails to open and the busy indicator does not light turn of
22. eoWave Maintaining the drive Caring for a CD or DVD Caring for the drive Appendix A Product specifications Appendix B Problem solving Appendix C Customizing the device driver configuration settings Enabling DMA for Windows Me Enabling DMA for Windows 2000 Professional Enabling DMA for Windows XP Appendix D Warranty information Warranty period Service and support Warranty information on the World Wide Web 5 Online technical support o de HS Telephone technical support IBM Statement of Limited i Z125 4753 06 8 2000 Part 1 General Terms La 3 Part 2 Country unique Terms Copyright IBM Corp 2002 Vii vii 1 1 1 1 1 1 1 2 1 2 1 2 13 1 4 1 4 i a ei 1 10 1 10 1 10 A 1 B 1 C 1 CA CA C2 D 1 D 1 D 1 D 1 D 1 D 3 D 3 D 5 iii Appendix E Notices fe cae de Ge ea Ge car at es CN Trademarks ne RES A E GC Electronic emissions notices ae AA a ra e ee ss i E2 Federal Communications Commission FCC statement E 2 iv IBM Multi Burner User s Guide Safety Read first Before installing this product read the Safety Information AA Glo del ia Antes de instalar este produto leia as Informac es de Seguranca ERAT ZII WAN Safety Information 248 Prije instalacije ovog produkta obavezno pro itajte Sigurnosne Upute Pred instalac tohoto produktu si p e t te p ru ku bez
23. ersions The 2 6 GB and 4 7 GB versions are single sided The 9 4 GB versions are double sided To access the data on both sides of the media you must remove the media from the drive turn it over and re insert it into the drive Removing the disc from the cartridge DVD RAM media is available in bare disc or cartridge form To use cartridge media in your Multi Burner you must first remove the disc from the cartridge 1 6 IBM Multi Burner User s Guide Removing the disc from the cartridge Using the tip of a ball point pen push and break the lock pin tab H To remove the disc use a ball point pen to push down on the cartridge lid lock H and pull the cartridge lid out E When the cartridge lid is open the disc can be removed Note The cartridge lid lock and the cartridge lid tab are located on the side of some cartridges as shown in BR and above m Attention Do not touch the recording area of the disc when handling bare media Returning the disc to the cartridge To return the disc to the cartridge align the label side of the disc PY with the DVD RAM cartridge label side Insert the disc and close the cartridge lid H A clicking sound will occur when the lid closed Precautions for handling Be careful when handling the removed disc Debris dust particles fingerprints smears or scratches may impair recording and playback of the media To clean dust or other debris use a CD Clea
24. f the computer and try using another 4 pin dc power cable Check that the color coded edge on the IDE cable aligns with pin 1 on the IDE port and is closest to the power cable on the drive See Step 5 Attaching the cables to the drive on page 1 5 Check the drive and any other device on the IDE cable for the proper settings See the configuration jumpers on page 1 4 Do the following If the middle connector on the IDE cable is attached to the IDE port on the system board remove the connector and reattach the cable If there is only one device on the IDE port attach the connector at one end of the cable to the IDE port and the connector at the other end to the device leaving the middle connector if there is one open If there are two devices on the IDE port attach the connector at one end of the cable to the IDE port If there is a hard disk drive attach it to the connector at the other end of the cable and attach the drive to the middle connector You cannot access the drive or the DVD RAM CD ROM icon is not displayed When the drive is properly installed a DVD RAM or CD ROM icon is displayed in the My Computer window Double click My Computer If a CD ROM icon is not present in the window that opens verify that the drive has been properly installed Verify that the configuration jumper is set properly See Step 3 Setting the configuration jumpers on page 1 4 Restart your computer If a drive
25. from either 1 an IBM reseller approved to perform warranty service or 2 from IBM If you purchase an IBM Personal Computer Machine in Albania Armenia Belarus Bosnia and Herzegovina Bulgaria Croatia Czech Republic Georgia Hungary Kazakhstan Kirghizia Federal Republic of Yugoslavia Former Yugoslav Republic of Macedonia FYROM Moldova Poland Romania Russia Slovak Republic Slovenia or Ukraine you may obtain warranty service for that Machine in any of those countries from either 1 an IBM reseller approved to perform warranty service or 2 from IBM If you purchase an IBM Machine in a Middle Eastern or African country you may obtain warranty service for that Machine from the IBM entity within the country of purchase if that IBM entity provides warranty service in that country or from an IBM reseller approved by IBM to perform warranty service on that Machine in that country Warranty service in Africa is available within 50 kilometers of an IBM authorized service provider You are responsible for transportation costs for Machines located outside 50 kilometers of an IBM authorized service provider Governing Law The applicable laws that govern interpret and enforce rights duties and obligations of each of us arising from or relating in any manner to the subject matter of this Statement without regard to conflict of laws principles as well as Country unique terms and competent court for this Statement are those of the countr
26. ght make movies and games run more smoothly because the microprocessor is allocating more processing time to video Enabling DMA for Windows Me To change the DMA parameter settings in Windows Me do the following Click Start Click Settings Click Control Panel Click View all control panel options Double click System Click the Device Manager tab Double click CD ROM Click on the drive that you want to modify Click the Settings tab Click to select the DMA check box Click OK eo O ONE Co Mr mk Enabling DMA for Windows 2000 Professional To change the parameter settings for Windows 2000 Professional do the following Click Start Click Settings Click Control Panel Double click System Click the Hardware tab Click the Device Manager button Click the IDE ATA ATAPI controller to expand the tree Click the device that corresponds to the controller where your Multi Burner is located Primary IDE or Secondary IDE 9 Click the Advanced Settings tab 10 Select the Transfer Mode pull down menu and select DMA if available 11 Click OK 12 Click Close to close the System Properties window A message is displayed informing you that the system settings have changed 13 Click OK to restart your computer ON OO N Copyright IBM Corp 2002 C 1 Enabling DMA for Windows XP To change the DMA parameter setting from the Windows XP desktop do the following Click Start Click Control Panel Click Swi
27. he disc Do not place the disc in direct sunlight Do not use commercial cleaners to clean the disc Do not bend the disc Caring for the drive To protect your drive during operation observe the following precautions Do not move the drive when it is in use Doing so might cause data error or damage the drive or media Avoid exposing the drive to the following conditions High humidity High temperature Excessive dust Mechanical vibration Sudden shock or dropping Placement on an inclined surface Direct sunlight 1 10 IBM Multi Burner User s Guide Sudden temperature changes Do not insert foreign objects into the drive Do not stack objects on the drive Do not remove the drive cover or attempt to service the drive Do not move the drive unit without removing any discs from the disc drawer and making sure that the drawer is closed Keep the original packing materials If you need to ship the drive unit to a different location use the original packing materials to ensure that the drive is transported safely Installation and user s guide 1 11 1 12 IBM Multi Burner User s Guide Appendix A Product specifications This appendix includes the following information Physical specifications Power requirements Environmental requirements Read speeds Write speeds Physical specifications The physical specifications of the drive are listed in the f
28. icon is still not found continue with the following steps 1 N N BRD Click Start Select Settings Select Control Panel Click System Click the Device Manager tab Double click View Devices by Type Select Hard Disk Controllers from the list displayed in the Device Manager window Verify that there are no conflicts with the controller The device status indicates whether the controller is working properly Copyright IBM Corp 2002 B 1 8 Select CD ROM from the list that is displayed in the Device Manager window Verify that a CD ROM device is present in the list and that no conflicts exist The device status indicates whether the device is working properly 9 Click OK 10 Close all windows and restart the computer If the device icon is still not present check cable connections and device jumper settings and resolve any conflicts that might exist The drive is not recognized by the operating system or the drive performs erratically Some computers have Compatible and High Performance modes for mass storage devices Normally the drive functions better under the High Performance mode However if your drive is not functioning properly in that mode you might need to use the Compatible mode Use the following procedure to check the configuration setup information for your computer 1 Access your configuration utility program 2 Select Devices 3 Scroll down to the Mass Storage Devices section Refer t
29. installerar den har produkten PREE MLM gt RAMA RARA Vi IBM Multi Burner User s Guide About this book This guide contains information on the IBM Multi Burner and is available in the following languages English French German Spanish Italian Brazilian Portuguese Simplified Chinese Traditional Chinese Japanese The guide is divided into the following parts Installation and user s guide This section contains a product description and installation and operating instructions Appendices This section contains information on Product specifications Problem solving Customizing the device driver configuration settings Help and service Warranty and notices Be sure to retain your proof of purchase It might be required for warranty service Registering your product Thank you for purchasing this IBM product Please take a few moments to register your product and provide us with information that will help IBM to better serve you in the future Your feedback is valuable to us in developing products and services that are important to you as well as in developing better ways to communicate with you Register your product on the IBM Web site at http www ibm com pc register IBM will send you information and updates on your registered product unless you indicate on the Web site questionnaire that you do not want to receive further information Copyright IBM Corp 2
30. ion technology for reliable CD burning Your Multi Burner can read many other formats including DVD Video Video CD audio CD multiple session extended architecture XA CDs and Kodak Photo CDs The Multi Burner is designed for installation in a computer that uses integrated drive electronics IDE or enhanced IDE EIDE architecture Software description Your IBM Multi Burner User s Guide and Software Disc 1 and Disc 2 contain the following software roxio VideoWave This software enables you to record video files to DVD RW or DVD R media that can be played in most stand alone DVD players You can also use this software to edit and modify your own video assets prior to recording If you have an analog or IEEE 1394 capture device installed in your computer you can use this software to record video from a camera e IBM Drive Letter Access DLA This software enables you to write directly to CD RW CD R DVD RAM DVD RW and DVD R media using the drive letter like you would if you were writing to a diskette You can also format DVD RAM Copyright IBM Corp 2002 1 1 DVD RW and DVD R media With DLA you can drag and drop files create new directories or save files from any application directly to your Multi Burner UDF reader This software enables you to install software for reading DVD RAM DVD RW and CD RW media on computers with DVD drives IBM Record Now This software enables you to copy CDs create audio CDs cr
31. l breach negligence misrepresentation or other contract or tort claim except for any liability that cannot be waived or limited by applicable laws IBM is liable for no more than 1 damages for bodily injury including death and damage to real property and tangible personal property and 2 the amount of any other actual direct damages up to the charges if recurring 12 months charges apply for the Machine that is subject of the claim For purposes of this item the term Machine includes Machine Code and Licensed Internal Code This limit also applies to IBM s suppliers and your reseller It is the maximum for which IBM its suppliers and your reseller are collectively responsible UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF THE FOLLOWING 1 THIRD PARTY CLAIMS AGAINST YOU FOR DAMAGES OTHER THAN THOSE UNDER THE FIRST ITEM LISTED ABOVE 2 LOSS OF OR DAMAGE TO YOUR RECORDS OR DATA OR 3 SPECIAL INCIDENTAL OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES LOST PROFITS OR LOST SAVINGS EVEN IF IBM ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU D 4 IBM Multi Burner User s Guide Governing Law Governing Law Both you and IBM consent to the application of the laws of the country in which you acquired the Machine to govern interpret
32. le click SETUP EXE and follow the on screen instructions Note The UDF reader is only needed on systems that do not have another DLA program for CD RW or DVD RW installed Using roxio VideoWave With roxio VideoWave you can capture edit and record video and audio files You can also use roxio VideoWave to create and record DVD videos using your own video and audio files For more detailed information on roxio Videowave features go to the VideoWave User s Guide in the Start menu The Video Edit window is the roxio VideoWave main window In this window you can import edit and convert your own video and audio files into an appropriate format To play back from DVD video video Installation and user s guide 1 9 files must be converted into MPEG 2 files with 48 kHz audio You can make this selection from the Produce button in the VideoWave video editing window When you have prepared and saved your video and audio files click the DVD button on the left side of the VideoWave video editing window to launch the DVD authoring application To use the authoring application use Import to bring your videos into the library then drag and drop them in the order that you would like to play them You can also import still images to use as menu backgrounds and audio clips to use with menus and videos You can drag and drop your content in the order in which it will play to the time line of menus or videos at the top of the window Selecting a
33. ly in the computer If you mount the drive vertically you must secure any discs that you place into the drive before the drive tray is closed or the drive will not be able to read the disc properly 1 Slide the drive into the bay Your computer might have required procedures for installing storage devices For more information on storage devices refer to the documentation that comes with your computer 2 Align the drive bay screw holes with the threaded holes in the drive housing or mounting bracket 3 Thread the screws in loosely to check their position Two screws are usually used on each side Verify that the alignment is correct then tighten the screws to secure the drive Do not overtighten Step 5 Attaching the cables to the drive The following diagram shows where to connect the cables to the drive Note Some computers have a smaller connector that is incompatible with the included internal audio cable If your computer has this kind of connector you might need to purchase a new audio cable 1 Connect the single connector end of the included internal audio cable to the appropriate connector on the computer system board 2 Connect one of the dual connector ends of the included internal audio cable to the audio out connector on the drive If you have another optical drive in your computer you can connect the other dual connector end to that drive 3 Attach a 40 pin IDE cable connector H to the IDE connector on the driv
34. ncy eject hole on the front of the drive see Front view of the drive on page 1 3 Push the paper clip until the tray opens Gently pull out the tray until you can remove the disc Using the DVD Player software This section describes how to use and customize the DVD Player software You can find current information on DVD Player software in the readme file on the User s Guide and Software Disc 1 Before using the software WinDVD requires a compatible video device driver and IDE bus mastering in order to work See Appendix C Customizing the device driver configuration setting e C 1 for information on enabling DMA bus mastering and for locating video device drivers Using the DVD Player When you insert a DVD Video disc into the drive the DVD Player software will automatically load and begin to play the video disc If the DVD disc contains both video and program content the program content will automatically play To view the video content of a video program DVD disc go to the Start menu launch WinDVD and click Play In Microsoft Windows XP you can also play DVD Video content by using the Windows Media Player application Changing the DVD region code Regionalization and Copy Protection the DVD region code uses the content scramble system CSS standard to prevent unauthorized duplication of the intellectual property rights distributed on DVDs lt was originally requested by the Motion Picture Association of America
35. nectors on the audio cables that are provided do not fit the connector on your audio adapter Some audio adapters might require a special cable See the documentation that comes with your audio adapter You might have to separately purchase an audio cable for the Multi Burner If you are using an IBM computer or IBM audio adapter refer to Appendix D Warranty information on page D 1 The Multi Burner does not operate and will not allow the disc to eject Turn off the computer and straighten a large paper clip to form a tool The straightened end must extend at least 45 mm 1 8 in Insert the extended end into the emergency eject hole on the front of the drive see Front view of the drive on page 1 3 Push the paper clip until the tray opens Gently pull out the tray until you can remove the disc Appendix B Problem solving B 3 B 4 IBM Multi Burner User s Guide Appendix C Customizing the device driver configuration settings Microsoft Windows Me and Windows 2000 Professional have two device driver configuration parameters Auto Insert Notify and DMA The Auto Insert Notify parameter enables the computer to start playing or accessing the disc automatically after being inserted in the drive The DMA parameter improves the computer performance by having the computer DMA controller handle data transfers from the CD to memory freeing the computer s microprocessor to preform more important tasks For example activating DMA mi
36. ning Kit Use a soft dry cloth to clean the disc Do not use solvents to clean the disc surface When labeling a disc write only on the printed label side or the cartridge using a soft felt tip marker Keep out of direct sunlight high temperatures and humidity Do not attach labels to either side of the disc Using the drive with CDs and DVDs Complete the following procedure to read a data disc 1 Turn on the computer 2 Press the Open Close button on the front of the drive 3 Insert a disc or cartridge in the tray with the label facing up 4 Close the tray by pressing the Open Close button or by gently pushing in the loading tray Attention Do not use force or insert foreign objects to open the loading tray 5 Wait for the drive busy indicator to turn off then double click My Computer Installation and user s guide 1 7 6 Double click the CD ROM or DVD RAM DVD R DVD RW icon Securing a disc in a vertically mounted drive The drive has four retainers molded into the loading tray for vertical mounting operation To insert a disc place it in the lower two retainers before closing the tray To remove a disc open the tray and lift the disc from the two lower retainers Manually ejecting a disc If the drive becomes inoperable and will not eject the disc turn off the computer and straighten a large paper clip to form a tool The straightened end must extend at least 45 mm 1 8 in Insert the extended end into the emerge
37. o the documentation that comes with your computer for additional details on selecting IDE performance modes The computer does not recognize the drive after the device drivers are loaded Check for incompatibilities among the Multi Burner device driver and other device drivers or other hardware in your computer Create a system diskette with minimum CONFIG SYS and AUTOEXEC BAT system files 1 Before creating special CONFIG SYS and AUTOEXEC BAT files make a backup copy of these files in a convenient directory From a DOS prompt do the following a Type copy CONFIG SYS CONFIG IBM and press Enter b Type copy AUTOEXEC BAT AUTOEXEC IBM and press Enter 2 Insert a blank formatted diskette into the diskette drive 3 Copy the CONFIG SYS and AUTOEXEC BAT files onto the diskette 4 Turn off the computer and ensure that the system diskette the diskette that you created is in the diskette drive 5 Restart the computer the computer starts from the system diskette 6 Observe the startup messages and ensure that the device driver IBMIDECD SYS loads When MSCDEX loads observe the drive letter that the computer assigns to the Multi Burner 7 Load a data CD into the loading tray then wait until the Busy indicator is not lit 8 Attempt to read the disc by typing dir x where x is the Multi Burner drive letter assigned after the MSCDEX message If the computer is able to read the disc a conflict probably exists among the device
38. of arbitrators shall be three with each side to the dispute being entitled to appoint one arbitrator The two arbitrators appointed by the parties shall appoint a third arbitrator before proceeding upon the reference The third arbitrator shall act as chairman of the proceedings Vacancies in the post of chairman shall be filled by the president of the ICC Other vacancies shall be filled by the respective nominating party Proceedings shall continue from the stage they were at when the vacancy occurred If one of the parties refuses or otherwise fails to appoint an arbitrator within 30 days of the date the other party appoints its the first appointed arbitrator shall be the sole arbitrator provided that the arbitrator was validly and properly appointed The English language version of this Agreement prevails over any other language version HONG KONG AND MACAU Governing Law The following replaces laws of the country in which you acquired the Machine in the first sentence laws of Hong Kong Special Administrative Region INDIA Limitation of Liability The following replaces items 1 and 2 of this Section 1 liability for bodily injury including death or damage to real property and tangible personal property will be limited to that caused by IBM s negligence 2 as to any other actual damage arising in any situation involving nonperformance by IBM pursuant to or in any way related to the subject of this Statement of Limited Warran
39. ollowing table Physical specification Height 42 mm 1 7 in Width 148 mm 5 8 in Length 185 mm 7 3 in Weight 830 g 1 8 Ib Power requirements The following table lists the power specifications by voltage level for the drive The power specifications are measured at the drive power connector and are nominal values Power specifications Voltage Average Maximum At voltage 5V de 800 mA 15A At voltage 12V de 1000 mA 18A Environmental requirements Specification Nonoperational Temperature noncondensing 5 C to 45 C 41 E to 113 F 20 C to 60 C 4 F to 140 F Relative humidity noncondensing 10 to 90 1 Product description data represents IBM s design objectives and is provided for comparative purposes actual results might vary based on a variety of factors This product data does not constitute a warranty Data is subject to change without notice Copyright IBM Corp 2002 A 1 Read speeds Media DVD ROM single layer Read Speed 4 1 10X constant angular velocity CAV DVD ROM dual layer 3 3 8X CAV DVD R 4 7 GB 3 3 8X CAV DVD RW 4 7 GB 3 3 8X CAV DVD RAM 4 7 9 4 GB 2X zoned constant linear velocity ZCLV DVD RAM 2 6 GB 1X ZCLV CD ROM 14 32X CAV CD R 14 32X CAV CD RW 10 24X CAV CD DA DAE 6 7 16X CAV Write sp
40. ons However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult an IBM authorized dealer or service representative for help Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits Proper cables and connectors are available from IBM authorized dealers IBM is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment Unauthorized changes or modifications could void the user s authority to operate the equipment This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Responsible party International Business Machines Corporation New Orchard Road Armonk NY 1050
41. or service is not intended to state or imply that only that IBM product program or service may be used Any functionally equivalent product program or service that does not infringe any IBM intellectual property right may be used instead However it is the user s responsibility to evaluate and verify the operation of any non IBM product program or service IBM may have patents or pending patent applications covering subject matter described in this document The furnishing of this document does not give you any license to these patents You can send license inquiries in writing to IBM Director of Licensing IBM Corporation North Castle Drive Armonk NY 10504 1785 U S A INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF NON INFRINGEMENT MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions therefore this statement may not apply to you This information could include technical inaccuracies or typographical errors Changes are periodically made to the information herein these changes will be incorporated in new editions of the publication IBM may make improvements and or changes in the product s and or the program s described in this publication at any time without notice IBM may use or
42. owing sentence is added to the end of item 2 IBM s liability under this item is limited to the violation of essential contractual terms in cases of ordinary negligence EGYPT Limitation of Liability The following replaces item 2 in this Section as to any other actual direct damages IBM s liability will be limited to the total amount you paid for the Machine that is the subject of the claim For purposes of this item the term Machine includes Machine Code and Licensed Internal Code Applicability of suppliers and resellers unchanged FRANCE Limitation of Liability The following replaces the second sentence of the first paragraph of this Section In such instances regardless of the basis on which you are entitled to claim damages from IBM IBM is liable for no more than items 1 and 2 unchanged IRELAND Extent of Warranty The following is added to this Section Except as expressly provided in these terms and conditions all statutory conditions including all warranties implied but without prejudice to the generality of the foregoing all warranties implied by the Sale of Goods Act 1893 or the Sale of Goods and Supply of Services Act 1980 are hereby excluded Limitation of Liability The following replaces items one and two of the first paragraph of this Section 1 death or personal injury or physical damage to your real property solely caused by IBM s negligence and 2 the D 8 IBM Multi Burner User s Guide amount of an
43. pe nostn ch instrukc L s sikkerhedsforskrifterne f r du installerer dette produkt Ennen kuin asennat t m n tuotteen lue turvaohjeet kohdasta Safety Information Avant d installer ce produit lisez les consignes de s curit Vor der Installation dieses Produkts die Sicherheitshinweise lesen Mpiv eykataot oete TO TIPOI V aut LABAOTE TIS TANPOPOPIES aoMaAEtac safety information MTV MANN NX 187 AT 1318 PING 397 A term k telep t se el tt olvassa el a Biztons gi el r sokat Prima di installare questo prodotto leggere le Informazioni sulla Sicurezza NMORENHI HERRE RA lt ESL EMSS Salo AO O APS OOND Ipex aa ce HHCTAJIMPA OBO MPOAYKT IpowtajTe unbopMmanmjara 3a GOe30eNHOCT Lees voordat u dit product installeert eerst de veiligheidsvoorschriften Les sikkerhetsinformasjonen Safety Information for du installerer dette produktet Przed zainstalowaniem tego produktu nale y zapozna sie z ksi k Informacje dotycz ce bezpiecze stwa Safety Information Antes de instalar este produto leia as Informa es sobre Seguran a Mepeg ycTaHOBKOU npoaYKTa MPO4YTUTE NHCTPYKLIUUN DO TexHuke GesonacHoctu Pred in tal ciou tohto zariadenia si pe taje Bezpe nostn predpisy Pred namestitvijo tega proizvoda preberite Varnostne informacije Antes de instalar este producto lea la informaci n de seguridad Copyright IBM Corp 2002 Vv Las s kerhetsinformationen innan du
44. ptions alterations and attachments not under warranty service You also agree to 1 ensure that the Machine is free of any legal obligations or restrictions that prevent its exchange 2 obtain authorization from the owner to have IBM or your reseller service a Machine that you do not own and 3 where applicable before service is provided a follow the problem determination problem analysis and service request procedures that IBM or your reseller provides b secure all programs data and funds contained in a Machine c provide IBM or your reseller with sufficient free and safe access to your facilities to permit them to fulfill their obligations and d inform IBM or your reseller of changes in a Machine s location IBM is responsible for loss of or damage to your Machine while it is 1 in IBM s possession or 2 in transit in those cases where IBM is responsible for the transportation charges Neither IBM nor your reseller is responsible for any of your confidential proprietary or personal information contained in a Machine which you return to IBM or your reseller for any reason You should remove all such information from the Machine prior to its return Limitation of Liability Circumstances may arise where because of a default on IBM s part or other liability you are entitled to recover damages from IBM In each such instance regardless of the basis on which you are entitled to claim damages from IBM including fundamenta
45. quently or otherwise Unless IBM specifies otherwise the following warranties apply only in the country where you acquire the Machine Nothing in this Statement of Limited Warranty affects any statutory rights of consumers that cannot be waived or limited by contract If you have any questions contact IBM or your reseller The IBM Warranty for Machines IBM warrants that each Machine 1 is free from defects in materials and workmanship and 2 conforms to IBM s Official Published Specifications Specifications The warranty period for a Machine is a specified fixed period commencing on its Date of Installation The date on your sales receipt is the Date of Installation unless IBM or your reseller informs you otherwise If a Machine does not function as warranted during the warranty period and IBM or your reseller are unable to either 1 make it do so or 2 replace it with one that is at least functionally equivalent you may return it to your place of purchase and your money will be refunded Extent of Warranty The warranty does not cover the repair or exchange of a Machine resulting from misuse accident modification unsuitable physical or operating environment improper maintenance by you or failure caused by a product for which IBM is not responsible The warranty is voided by removal or alteration of Machine or parts identification labels THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND REPLACE ALL OTHER WARRANTIES OR CONDITIONS
46. r will 1 either repair or exchange the failing Machine and 2 provide the service either at your location or a service center IBM or your reseller will also manage and install selected engineering changes that apply to the Machine Some parts of IBM Machines are designated as Customer Replaceable Units called CRUs e g keyboards memory or hard disk drives IBM ships CRUs to you for replacement by you You must Appendix D Warranty information D 3 return all defective CRUs to IBM within 30 days of your receipt of the replacement CRU You are responsible for downloading designated Machine Code and Licensed Internal Code updates from an IBM Internet Web site or from other electronic media and following the instructions that IBM provides When warranty service involves the exchange of a Machine or part the item IBM or your reseller replaces becomes its property and the replacement becomes yours You represent that all removed items are genuine and unaltered The replacement may not be new but will be in good working order and at least functionally equivalent to the item replaced The replacement assumes the warranty service status of the replaced item Many features conversions or upgrades involve the removal of parts and their return to IBM A part that replaces a removed part will assume the warranty service status of the removed part Before IBM or your reseller exchanges a Machine or part you agree to remove all features parts o
47. rdinaire afin de fournir une protection raisonnable contre l interf rence d appareils de communication autoris s Unione Europea Directiva EMC Conformidad lectromagn tica Este producto satisface los requisitos de protecci n del Consejo de la UE Directiva 89 336 CEE en lo que a la legislatura de los Estados Miembros sobre compatibilidad electromagn tica se refiere IBM no puede aceptar responsabilidad alguna si este producto deja de satisfacer dichos requisitos de protecci n como resultado de una modificaci n no recomendada del producto incluyendo el ajuste de tarjetas de Opci n que no sean IBM Appendix E Notices E 3 Este producto ha sido probado y satisface los l mites para Equipos Inform ticos Clase B de conformidad con el Est ndar Europeo EN 55022 Los l mites para los equipos de Clase B se han establecido para entornos residenciales t picos a fin de proporcionar una protecci n razonable contra las interferencias con dispositivos de comunicaci n licenciados Union Europea Normativa EMC Questo prodotto e conforme alle normative di protezione ai sensi della Direttiva del Consiglio dell Unione Europea 89 336 CEE sull armonizzazione legislativa degli stati membri in materia di compatibilita elettromagnetica IBM non accetta responsabilita alcuna per la mancata conformita alle normative di protezione dovuta a modifiche non consigliate al prodotto compresa l installazione di schede e componenti di marca diversa da
48. stallation and user s guide 1 3 Installing the drive Complete the following steps to install the drive Step 1 Opening the computer 1 Turn off the computer and all attached devices 2 Unplug all power cords from the computer and all attached devices 3 Remove the cover from the computer Refer to your computer documentation for instructions on removing the computer cover Step 2 Unpacking the drive 1 Before opening the antistatic bag that the drive is packed in touch the bag to an unpainted metal surface for at least two seconds This drains the static electricity from the package and your body 2 Remove the drive from the bag If you must put the drive down place the antistatic bag on a flat padded surface and place the drive on the antistatic bag Step 3 Setting the configuration jumpers You can configure your drive as master H slave H or cable select El by placing the jumper over the configuration pins as shown OO OO OO 00900000000000000000 BEET SIEN o0000 rt 008 Pops Use the following guidelines to determine the correct configuration for your drive e Configure the drive as a master if it will be the only device that is connected to the IDE cable This is the preset configuration e Configure the drive as a slave if it will be the second device on an IDE cable Be sure to configure the other device as a master In some cases
49. t have a hardware problem If the Multi Burner still does not read the data disc the Multi Burner might be defective Go to Appendix D Warranty information on page D 1 The disc cannot be read Take the following actions 1 The disc might be dirty clean it as described in 2 The disc might be defective try another disc 3 The disc is not ISO 9660 High Sierra Group HSG or Universal Disc Format UDS compatible Check with your place of purchase There is no sound from the disc 1 Check that you are not using a data CD 2 Adjust the audio adapter volume control See the documentation that comes with your audio adapter and audio CD player program 3 Turn off the computer unplug the cables from the electrical outlets for your computer and all attached devices and remove the computer cover Ensure that the audio signal cable connects the Multi Burner with the sound adapter You receive an error message Take the following actions for these common error messages CDR 103 The disc in the Multi Burner is not High Sierra ISO 9660 or UDF format The Multi Burner does not support the media CDR 101 A not ready reading the drive situation occurs when you try to access the Multi Burner before the drive is ready The busy indicator lights when you attempt to access the drive after loading a disc into the loading tray Wait until the busy indicator is no longer lit before attempting to access the drive The con
50. tch to classic view Double click System Click the Hardware tab Click the Device Manager button Click the IDE ATA ATAPI controller to expand the tree Double click on the controller where your Multi Burner is located Primary IDE or Secondary IDE Click the Advanced Settings tab Select the appropriate Transfer Mode pull down that corresponds to the Multi Burner location Device 0 for Master Device 1 for Slave 11 Select DMA if it is available 12 Click OK 200 AD OU BY ME k C 2 IBM Multi Burner User s Guide Appendix D Warranty information This section contains the warranty period for your product information about obtaining warranty service and support and the IBM Statement of Limited Warranty Warranty period Contact your place of purchase for warranty service information Some IBM Machines are eligible for on site warranty service depending on the country or region where service is performed Machine IBM Multi Burner Warranty period One year Service and support The following information describes the technical support that is available for your product during the warranty period or throughout the life of the product Refer to your IBM Statement of Limited Warranty for a full explanation of IBM warranty terms Warranty information on the World Wide Web The IBM Machine Warranties Web site at http www ibm com servers support machine_warranties contains a worldwide overview of the IBM
51. th the computer cover and that they do not block the power supply fan blades or airflow paths 3 Reinstall the computer cover 4 Reconnect all external devices 5 Reconnect all power cords into the electrical outlets Step 7 Installing the software All of the software for the drive is contained on the User s Guide and Software Discs The User s Guide and Software Disc 1 contains this User s Guide IBM RecordNow IBM Simple Backup and IBM DLA The User s Guide and Software Disc 2 contains Intervideo WinDVD and roxio VideoWave Complete the following procedure to install the software 1 Decide which software you wish to install 2 Insert either the User s Guide and Software Disc 1 or the User s Guide and Software Disc 2 into the drive If the CD starts automatically skip to step 6 If the CD does not automatically start click Start and then click Run Type e launch bat where e is the drive letter of the CD or DVD drive Click OK Select your language Select the software you want to install Follow the on screen instructions After the software is installed restart the computer Repeat for each software application 2 0 8 NO Or GO k Note For full drive functionality install all software applications listed in the browser window Using the drive This section contains information on using the Multi Burner Using single and double sided DVD RAM media DVD RAM media is available in single sided and double sided v
52. ties window Click the General Properties tab Insert a single region DVD of the new region Select the correct region code for your country Click OK COONOGTRwWN Using drive letter access DLA Drive Letter Access DLA is provided so that you can write data to CD R CD RW DVD RAM DVD RW and DVD R media DVD RAM DVD RW and CD RW media can be written to many times while DVD R and CD R media can only be formatted and written to once To format and write to DVD R CD R DVD RAM DVD RW or CD RW media 1 Insert a disc into the drive 2 Double click My Computer Right click the Multi Burner drive letter 3 Click Format Formatting a DVD can take up to 90 minutes 4 After formatting is complete you can drag and drop files to the Multi Burner drive icon or you can move files in Windows Explorer To make CD R media compatible in other computers 1 Double click My Computer Right click the Multi Burner drive letter 2 Click Make Compatible To use UDF formatted DVD RAM DVD RW or CD RW media in other computers a UDF reader is included on the User s Guide and Software CD To use the UDF reader follow this procedure 1 Insert the User s Guide and Software CD into the CD or DVD drive of the computer you want to use the UDF formatted discs with 2 Click Start 3 Click Run 4 Type e UDF language where e is the drive letter of the CD or DVD drive and language is your language 5 Click OK 6 Doub
53. ty IBM s liability will be limited to the charge paid by you for the individual Machine that is the subject of the claim JAPAN Governing Law The following sentence is added to this Section Any doubts concerning this Agreement will be initially resolved between us in good faith and in accordance with the principle of mutual trust NEW ZEALAND The IBM Warranty for Machines The following paragraph is added to this Section The warranties specified in this Section are in addition to any rights you may have under the Consumer Guarantees Act 1993 or other legislation which cannot be excluded or limited The Consumer Guarantees Act 1993 will not apply in respect of any goods which IBM provides if you require the goods for the purposes of a business as defined in that Act Limitation of Liability The following is added to this Section Where Machines are not acquired for the purposes of a business as defined in the Consumer Guarantees Act 1993 the limitations in this Section are subject to the limitations in that Act PEOPLE S REPUBLIC OF CHINA PRC Governing Law The following replaces this Section Both you and IBM consent to the application of the laws of the State of New York except when local law requires otherwise to govern interpret and D 6 IBM Multi Burner User s Guide enforce all your and IBM s rights duties and obligations arising from or relating in any manner to the subject matter of this Agreement without regard
54. uropean Union emission directive This product is in conformity with the protection requirements of EU Council Directive 89 366 ECC on the approximation of the laws of the Member States relating to electromagnetic compatibility IBM can not accept responsibility for any failure to satisfy the protection requirements resulting from a non recommended modification of the product including the fitting of non IBM option cards This product has been tested and found to comply with the limits for Class B Information Technology Equipment according to European Standard EN 55022 The limits for Class B equipment were derived for typical residential environments to provide reasonable protection against interference with licensed communication devices Union Europ enne Directive Conformit lectromagn tique Ce produit est conforme aux exigences de protection de la Directive 89 336 EEC du Conseil de VUE sur le rapprochement des lois des Etats membres en mati re de compatibilit lectromagn tique IBM ne peut accepter aucune responsabilit pour le manquement aux exigences de protection r sultant d une modification non recommand e du produit y compris l installation de cartes autres que les cartes IBM Ce produit a t test et il satisfait les conditions de l quipement informatique de Classe B en vertu de Standard europ en EN 55022 Les conditions pour l quipement de Classe B ont t d finies en fonction d un contexte r sidentiel o
55. y in which the warranty service is being provided except that in 1 Albania Bosnia Herzegovina Bulgaria Croatia Hungary Former Yugoslav Republic of Macedonia Romania Slovakia Slovenia Armenia Azerbaijan Belarus Georgia Kazakhstan Kyrgyzstan Moldova Russia Tajikistan Turkmenistan Ukraine and Uzbekistan the laws of Austria apply 2 Estonia Latvia and Lithuania the laws of Finland apply 3 Algeria Benin Burkina Faso Cameroon Cape Verde Central African Republic Chad Congo Djibouti Democratic Republic of Congo Equatorial Guinea France Gabon Gambia Guinea Guinea Bissau Ivory Coast Lebanon Mali Mauritania Morocco Niger Senegal Togo and Tunisia this Agreement will be construed and the legal relations between the parties will be determined in accordance with the French laws and all disputes arising out of this Agreement or related to its violation or execution including summary proceedings will be settled exclusively by the Commercial Court of Paris 4 Angola Bahrain Botswana Burundi Egypt Eritrea Ethiopia Ghana Jordan Kenya Kuwait Liberia Malawi Malta Mozambique Nigeria Oman Pakistan Qatar Rwanda Sao Tome Saudi Arabia Sierra Leone Somalia Tanzania Uganda United Arab Emirates United Kingdom West Bank Gaza Yemen Zambia and Zimbabwe this Agreement will be governed by English Appendix D Warranty information D 7 Law and disputes relating to it will be submitted to the exclusive juris
56. y other actual direct damages up to 125 percent of the charges if recurring the 12 months charges apply for the Machine that is the subject of the claim or which otherwise gives rise to the claim Applicability of suppliers and resellers unchanged The following paragraph is added at the end of this Section IBM s entire liability and your sole remedy whether in contract or in tort in respect of any default shall be limited to damages ITALY Limitation of Liability The following replaces the second sentence in the first paragraph In each such instance unless otherwise provided by mandatory law IBM is liable for no more than 1 unchanged 2 as to any other actual damage arising in all situations involving nonperformance by IBM pursuant to or in any way related to the subject matter of this Statement of Warranty IBM s liability will be limited to the total amount you paid for the Machine that is the subject of the claim Applicability of suppliers and resellers unchanged The following replaces the third paragraph of this Section Unless otherwise provided by mandatory law IBM and your reseller are not liable for any of the following items 1 and 2 unchanged 3 indirect damages even if IBM or your reseller is informed of their possibility SOUTH AFRICA NAMIBIA BOTSWANA LESOTHO AND SWAZILAND Limitation of Liability The following is added to this Section IBM s entire liability to you for actual damages arising in
Download Pdf Manuals
Related Search