Home

IBM 09N4076 Computer Drive User Manual

1. The illustration shows the master El setting the subordinate or slave setting and the cable select setting Configure the CD RW drive by placing the jumper over the set of pins corresponding to the setting you chose in Step 3 Selecting an IDE port e If you are configuring the CD RW drive as master set the jumper to the master El device setting This is how the drive is set when it is shipped If there is a second device on the IDE port make sure that device is configured as subordinate e If you are configuring the CD RW drive as subordinate set the jumper to the subordinate A device setting Make sure that the other device on the IDE port is configured as master or master with subordinate present e If you are configuring the CD RW drive as cable select set the jumper to the cable select device setting If there is another device on the IDE port make sure that the second device is also configured for cable select Step 5 Mounting the drive in the bay Attention Be sure to use the M3 x 5 mm mounting screws in the option package Using screws that are too long might damage the drive You can mount the CD RW drive horizontally or vertically in the computer If you mount the drive vertically you must secure any CDs you place into the drive before the drive tray is closed or the CD RW drive will not be able to read the CD properly For further instructions on securing your CDs in a ver
2. 5555 33 El El El i El El Reserved Audio out connector This port connects the CD RW drive to a sound adapter Configuration pins These pins are used to set the drive configuration El IDE connector This port connects the CD RW drive to the IDE cable DC power connector This port connects the CD RW drive to the computer power supply cord Installing the drive Follow these steps to install the CD RW drive into your computer Part 1 Installation and usage guide 1 19 Step 1 Opening the computer 1 Turn off the computer and all attached devices 2 Unplug the power cords for the computer and all attached devices 3 Remove the cover from the computer Step 2 Unpacking the drive 1 Before opening the antistatic bag that the drive is packed in touch it to an unpainted metal surface for at least two seconds This drains the static electricity from the package and your body Remove the drive from the bag If you must put the drive down place the antistatic bag on a flat padded surface such as a magazine and place the drive on the antistatic bag Step 3 Selecting an IDE port Newer computers typically have two IDE ports each of which can support two devices Typically the IDE port connected to your hard disk drive is the primary IDE port The other IDE port is the secondary port The IDE port and the cable position that you select determine which configura
3. 2 22 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit If a Machine does not function as warranted during the warranty period and IBM or your reseller are unable to either 1 make it do so or 2 replace it with one that is at least functionally equivalent you may return it to your place of purchase and your money will be refunded The replacement may not be new but will be in good working order Extent of Warranty The warranty does not cover the repair or exchange of a Machine resulting from misuse accident modification unsuitable physical or operating environment improper maintenance by you or failure caused by a product for which IBM is not responsible The warranty is voided by removal or alteration of Machine or parts identification labels THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND REPLACE ALL OTHER WARRANTIES OR CONDITIONS EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THESE WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF EXPRESS OR IMPLIED WARRANTIES SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU IN THAT EVENT SUCH WARRANTIES ARE LIMITED IN DURATION TO THE WARRANTY PERIOD NO WARRANTIES APPLY AFTER THAT PERIOD Items Not Covered by Warranty IBM does not warrant unint
4. Write CD RW disc 2X 4X Drive performance specifications The following table lists the performance specifications of the CD RW drive Drive performance Feature Specification Burst data transfer rate 16 7 MB12 per second ATA PIO Mode 4 16 7 MB per second ATA multiword DMA Mode 2 33 3 MB per second UDMA Average access time including latency 110 ms 14 32X CAV Cache memory Read Write Disc diameter 2 MB 12 cm 8 cm read only Rotational speed CD RW 4000 rpm Rotational speed CD ROM CD R 7000 rpm Mean time between failures MTBF 120000 POH duty 10 12 The formatted capacity of 1 MB is approximately 1 000 000 bytes of data 2 2 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit The following table summarizes the CD format capabilities of the Easy CD Creator program Refer to the Adaptec software online users s guide for the most recent information on CD format capabilities Format Copy Create Capability Capability CD DA Red Book Yes Yes CD4G No No CD TEXT Yes No CD ROM Yellow Book Yes Yes CD ROM XA Mode 2 Yes Yes CD I Green Book Yes No CD I Bridge No No Video CD White Book Yes No CD R Orange Book P II Yes Yes CD RW Orange Book P III Yes Yes Multisession CD Yes Yes CD Extra Blue Book Yes Yes Photo CD Yes No Mixed Mode CD Yes Yes Bootable CD Yes Yes
5. 1 16 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit e Blank CD RW disc e Blank CD R disc e Adaptec Easy CD Creator DirectCD disc e Option Diskette e Laser Safety Guide for CD ROMs e Electrical safety booklet Contact your place of purchase if an item is missing or damaged Be sure to retain your proof of purchase It might be required to receive warranty service See Appendix D Help and service information on page 2 20 for technical support information Software description The Adaptec Easy CD Creator DirectCD CD contains programs that work with Windows 98 Windows 95 Windows 2000 and Windows NT Workstation 4 0 You can use the programs with your CD RW drive to create audio and data CDs to copy CDs and to make jewel case inserts or CD labels This manual will give you basic instructions on using the software so that you can get started creating CDs Additional information about the software and how to use it can be found in the online user s guide on the software disc The BM Option Diskette contains device drivers for Windows 98 Windows 95 Windows NT 4 0 Windows 3 x OS 2 and DOS that enable you to access the drive as a CD ROM drive in DOS mode The diskette also includes an audio CD player program for DOS and a diagnostic program Note The software included in this option kit does not enable the drive s CD recording capabilities with DOS Windows 3 x or OS 2 operating systems Before you beg
6. 4X 8X 32X CD ReWritable drive 2 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit AX 8X 32X Internal RW CD ROM Drive Option Kit User s Guide ONS by Note Before using this information and the product it supports be sure to read the information under Appendix E Product warranty and notices on page 2 22 First Edition February 2000 The following paragraph does not apply to the United Kingdom or any country where such provisions are inconsistent with local law INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE Some states do not allow disclaimer of express or implied warranties in certain transactions therefore this statement may not apply to you This publication could include technical inaccuracies or typographical errors Changes are periodically made to the information herein these changes will be incorporated in new editions of the publication IBM may make improvements and or changes in the product s and or the program s described in this publication at any time It is possible that this publication may contain reference to or information about IBM products machines and programs programming or services that are not announced in your country Such references or information must not be construed to m
7. Disc at Once Yes Yes Track at Once Yes Yes Session at Once Yes Yes The CD RW drive uses the following methods to write files to CDs e Disc at Once The drive writes to the entire disc in a single pass data cannot be added at a later time e Track at Once The drive copies one track at a time to the disc e Multisession The drive writes several sessions to a disc each session has at least one track Listed below are descriptions of different CD formats that appear in the table CD Digital Audio This format records audio CDs that can be played on audio CD players CD Extra This format records audio and data in a multisession format CD TEXT This format records audio CDs with the album names and song titles encoded CD TEXT information is displayed on CD TEXT compatible CD players and CD ROM drives CD ROM Mode 1 This format is used for most CD ROM applications CD ROM Mode 2 Form 1 and Mode 2 Form 2 or CD ROM Extended Architecture This standard was created for playback of Part 2 Appendixes 2 3 multimedia content CD I Mode 2 Form 1 and Mode 2 Form 2 and CD I Ready This format is used for home entertainment systems CD I Bridge This format records a combination of Kodak Photo CDs and Video CDs that can be played on TV set top players and personal computers Photo CD single and multisession This format records Kodak Photo CDs Video CD This format records CDs that are playable on TV set t
8. a Pred in tal ciou tohto zariadenia si pe itaje Bezpe nostn predpisy Pred namestitvijo tega proizvoda preberite Varnostne informacije Antes de instalar este producto lea la informaci n de seguridad iv IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit L s s kerhetsinformationen innan du installerar den h r produkten BR RE ve ZT HAN REA e Registering your option Thank you for purchasing OPTIONS by IBM Please take a few moments to register your product and provide us with information that will help IBM to better serve you in the future Your feedback is valuable to us in developing products and services that are important to you as well as in developing better ways to communicate with you Register your option on the IBM Web site at http www ibm com pc register IBM will send you information and updates on your registered product unless you indicate on the Web site questionnaire that you do not want to receive further information About this book This manual contains information on the IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit It is divided into the following parts Part 1 Installation and usage instructions in the following languages e English e German e French e Italian e Spanish e Brazilian Portuguese e Japanese Part 2 Device driver special configu
9. 8X 32X CD ReWritable Internal IDE Option Kit 2 The CD might be defective try another CD 3 The CD is not ISO 9660 or High Sierra Group HSG compatible Check with your place of purchase There is no sound from the CD Take the following actions 1 Check that you are using an audio CD and not a data CD 2 Adjust the volume control on the drive See Front view of the drive on page 1 4 to locate the volume control if you have connected headphones to the front of the drive 3 Adjust the sound adapter volume control See the documentation that comes with your sound adapter and audio CD player program 4 Turn off the computer unplug the cables from the electrical outlets for your computer and all attached devices and remove the computer cover Check that the audio signal cable connects the CD RW drive to the sound adapter Your screen displays an error message Take the following actions for two common error messages e CDR 103 The CD in the CD RW drive is not a High Sierra or ISO 9660 format The CD RW drive does not support this format e CDR 101 This message displays when you try to access the CD RW drive before the drive is ready The busy indicator lights when you attempt to access the drive after loading a CD into the CD tray Wait until the busy indicator stops lighting before attempting to read the drive The connectors on the audio cables provided do not fit the connector on your sound adapter Some
10. cable If you use the included IDE cable attach one end of the cable to your system board IDE port or to your IDE adapter and the other end of the IDE cable to the CD RW drive 3 Locate one of the available power cords attached to your computer power source Attach the four pin power cable to the CD RW drive dc power connector Step 7 Completing the hardware installation 1 Be sure that the drive is securely mounted and the connectors are firmly attached 2 Be sure that the cables do not interfere with the computer cover and do not block the power supply fan blades or air flow paths 3 Reinstall the computer cover 4 Reconnect all devices and check any devices that might have become disconnected such as the keyboard mouse and monitor 5 Plug all power cords into electrical outlets 1 22 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit Step 8 Attaching the faceplates This option package includes two faceplates that conform to the curved design of certain computers If your computer has a curved design you can attach one of the included faceplates so that the front of the CD RW drive matches the exterior cabinet Choose the faceplate that best fits your computer and attach it after you have mounted the CD RW drive in the appropriate bay Note Depending on the exterior design of your computer you may need to attach the faceplate before placing the cover back on your computer Step 9 Updating your computer
11. can remove the CD Tz CD Using the Easy CD Creator DirectCD programs To use the Easy CD Creator DirectCD software insert a blank or partially recorded CD R or CD RW disc this option kit includes a blank CD R disc and a blank CD RW disc into your CD RW drive The Easy CD Creator menu window opens automatically To open DirectCD 1 Click Start gt Programs gt Adaptec DirectCD 2 Click DirectCD Wizard Formatting CDs You must format a blank CD RW disc using DirectCD before you can copy files to the disc To format a CD RW disc with the DirectCD program 1 Insert a blank disc included in the drive The DirectCD Wizard Welcome window opens 2 Click Next twice The Format Disc window opens Attention Formatting completes in about 30 minutes The DirectCD program configures the disc to receive data verifies the integrity of the disc surface and writes DirectCD file system structures to the disc You can do other tasks on your computer while the disc is being formatted 3 Click Next to continue The Name Your Disc window opens 10 Some CDs such as multisession CDs do not require formatting For more information see the Adaptec software online user s guide 1 28 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit 4 Type the title of your disc in the Name Your Disc window The disc name can be up to 11 characters 5 If you plan to use data compression software with this disc click t
12. configuration After you have completed the hardware installation restart your computer Usually the configuration setup information screen is displayed If this screen is not displayed check your computer documentation for information about accessing the configuration or setup utility program To see the configuration information for most IBM computers press F1 during startup When you have finished reviewing the information save the changes and exit Note Some older computers with one IDE port might not display the CD RW drive information when you review the configuration setup information You still can use the CD RW drive in this situation if you have properly completed the installation Step 10 Installing the optional DOS device driver Note This device driver is not necessary to use the CD RW drive with most operating systems It is only necessary if you plan to use the CD RW drive as a CD ROM drive with DOS or you need to access the CD RW drive using a DOS prompt Be sure to see the READ ME file on the Option Diskette for the latest information about the software on the Option Diskette The JBM Option Diskette contains device drivers that allow you to access the CD RW drive from a DOS prompt To install the JBM Option Diskette device drivers for Windows 98 Windows 95 Windows 3 x OS 2 or DOS Insert the IBM Option Diskette into the diskette drive Type A CDSETUP in a command line and press Ent
13. following table Physical Specifications Height 42 mm 1 7 in Width 149 mm 5 9 in Length 206 mm 8 1 in Weight 1 1 kg 2 4 Ib Power requirements The following table lists the power specifications by voltage level for the IBM The power specifications are measured at the drive power connector and are nominal values Power Specifications At Voltage 12 V dc 5 V dc Operational current rating is 1 0A 12A 11 Product description data represents IBM s design objectives and is provided for comparative purposes actual results might vary based on a variety of factors This product data does not constitute a warranty Data is subject to change without notice O Copyright IBM Corp 2000 2 1 Environmental requirements The following table lists the environmental specifications for the CD RW drive You can mount the drive vertically or horizontally Environmental Requirements Specification Operational Nonoperational Temperature 5 to 45 20 C to 60 C noncondensing 41 to 113 F 4 F to 140 F Relative humidity 10 to 80 5 to 90 noncondensing Write Read speeds The following table lists the CD RW drive write read speeds for different media Drive Write Read Speeds Function Speed Read CD ROM CD R disc 1X 2X 4X 8X 16X 14X 32X CAV Read CD RW disc Write CD R disc 8X 20X CAV 2X 4X 8X
14. objects into the drive e Do not stack objects on the drive e Do not remove the drive cover or attempt to service the drive Do not operate the drive under any of the following conditions A High temperature high humidity or direct sunlight Excessive vibration sudden shock or inclined surface Excessive dust Loading a CD To load a CD into a horizontally mounted CD RW drive follow these steps A 1 Press the Eject Load button The tray slides out of the drive 2 Insert the CD into the loading tray with the label facing up 3 Close the loading tray by pressing the Eject Load button or by gently pushing the tray in Attention Do not force the tray to open do not insert foreign objects into the CD tray If your tray does not open when you press the Eject Load button see Manually ejecting a CD on page 1 13 for information on manual ejection Part 1 Installation and usage guide 1 11 To load a CD into a vertically mounted CD RW drive follow these steps 1 Press the Eject Load button 2 Look at the illustrations and compare them to your loading tray e If your loading tray looks like the left illustration insert the CD carefully so that the edges of the CD are underneath the tabs on the loading tray These plastic tabs cover the edges of the CD and hold it in place The tabs are attached to the tray itself and cannot be moved e If your l
15. one CD to another CD To copy a commercial CD you must either own the copyright or obtain permission from the copyright owner If you do not own the copyright or do not have permission to copy from the copyright owner you might be violating copyright law and might be subject to payment of damages or other remedies For more information on copyright law consult your legal advisor To back up copy a CD using your CD RW drive 1 Click Start gt Programs gt Adaptec Easy CD Creator gt Features 2 Click CD Copier The CD Copier window will open 3 Click the Source and Destination tab if it is not on top 4 In the Copy From section select the source drive from the scrolldown box Note This is the drive containing the CD you want to copy 5 In the Record To section select the CD RW drive from the scrolldown box Be sure that there is a blank CD R or CD RW disc in the CD RW drive 6 On the Advanced tab you can choose to test the CD for the best possible recording speed You can also change the number of copies made or choose to have the CD copied to your hard disk before copying it to the blank CD These selections will increase the time it takes to copy the CD 7 When you are finished choosing the settings place the CD you are going to copy into the source drive 8 Click Copy to start copying your CD 1 30 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit Product registration Thank you for purchasi
16. present or not usable This parameter instructs the computer to display a summary of RAM allocation and expanded memory usage at startup time L drive letter K 2 16 This parameter specifies the drive letter to be assigned to the first CD ROM drive Do not assign a letter already used by an existing drive or your computer will not be able to access the CD ROM drive For example you might use C MSCDEX EXE D IBMCD100 L F Normally the CD ROM drive is assigned to the next available drive letter after devices such as diskette drives and hard disk drives Therefore you use this option only if you wish to assign a drive letter beyond the last letter previously allocated by DOS This parameter instructs MSCDEX EXE to use Kanji Japanese file structures if present rather than the default alphanumeric file structures IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit IS This parameter instructs MSCDEX EXE to allow networked computers to share CD ROM drives Conserving DOS conventional memory If the CD ROM drive support software is loaded in DOS conventional memory below 640 KB RAM there might be insufficient memory to run some DOS applications The CDSETUP program attempts to load the IDE CD ROM drive device driver and MSCDEX into upper memory when possible to avoid this problem For more information on techniques to conserve conventional memory refer to the following topics in the documentation that comes with you
17. prevail over this warranty statement Warranty Service If you purchased an IBM Machine in Austria Belgium Denmark Estonia Finland France Germany Greece Iceland Ireland Italy Latvia Lithuania Luxembourg Netherlands Norway Portugal Spain Sweden Switzerland or United Kingdom you may obtain warranty service for that Machine in any of those countries from either 1 an IBM reseller approved to perform warranty service or 2 from IBM If you purchased an IBM Personal Computer Machine in Albania Armenia Belarus Bosnia and Herzegovina Bulgaria Croatia Czech Republic Georgia Hungary Kazakhstan Kirghizia Federal Republic of Yugoslavia Former Yugoslav Republic of Macedonia FYROM Moldova Poland Romania Russia Slovak Republic Slovenia or Ukraine you may obtain warranty service for that Machine in any of those countries from either 1 an IBM reseller approved to perform warranty service or 2 from IBM The applicable laws Country unique terms and competent court for this Statement are those of the country in which the warranty service is being provided However the laws of Austria 2 28 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit govern this Statement if the warranty service is provided in Albania Armenia Belarus Bosnia and Herzegovina Bulgaria Croatia Czech Republic Federal Republic of Yugoslavia Georgia Hungary Kazakhstan Kirghizia Former Yugoslav Republic of Macedonia FYROM Moldova Polan
18. properly completed the installation Step 10 Installing the optional DOS device driver Note This device driver is not necessary to use the CD RW drive with most operating systems It is only necessary if you plan to use the CD RW drive as a CD ROM drive with DOS or you need to access the CD RW drive using a DOS prompt Be sure to see the READ ME file on the Option Diskette for the latest information about the software on the Option Diskette The JBM Option Diskette contains device drivers that allow you to access the CD RW drive from a DOS prompt 1 8 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit To install the JBM Option Diskette device drivers for Windows 98 Windows 95 Windows 3 x OS 2 or DOS Insert the IBM Option Diskette into the diskette drive Type A CDSETUP in a command line and press Enter Click Setup Follow the on screen instructions to install the software Click Exit after software installation completes Restart your computer so the new settings take effect Qv oen boves Windows NT 4 0 will automatically detect the presence of the drive No additional steps are required to activate the device drivers For optional information about configuring the IBM Option Diskette device drivers for Windows 3 x DOS OS 2 Windows 98 and Windows 95 go to Appendix C Customizing device driver configuration settings on page 2 13 Step 11 Installing the Easy CD Creator DirectCD softw
19. sound adapters might require a special cable See the documentation that comes with your sound adapter You might have to separately purchase an audio cable for the CD RW drive The audio out connector on the CD RW drive requires a MPC 2 compliant Molex 70066 G connector To locate the drive audio connector refer to Back view of the drive on page 1 4 If you are using an IBM computer or IBM sound adapter refer to Appendix D Help and service information on page 2 20 for assistance Part 2 Appendixes 2 11 Diagnostics The IBM Option Diskette contains a problem solving diagnostic program for DOS You must successfully load the CD RW drive device drivers before starting the diagnostic program To start the diagnostic program insert the JBM Option Diskette type A CDDIAG at the DOS prompt and press Enter Additional help The READ ME file on the BM Option Diskette includes troubleshooting hints If you follow these instructions and still have a problem go to Appendix D Help and service information on page 2 20 2 12 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit Appendix C Customizing device driver configuration settings Attention After you install the JBM Option Diskette you can use a DOS session in Windows 3 x DOS OS 2 Windows 98 and Windows 95 to access the drive as a CD ROM drive This section contains optional configuration information for the JBM Option Diskette device drivers
20. BM You may be required to present proof of purchase IBM or your reseller provides certain types of repair and exchange service either at your location or at a service center to keep Machines in or restore them to conformance with their Specifications IBM or your reseller will inform you of the available types of service for a Machine based on its country of installation IBM may repair the failing Machine or exchange it at its discretion When warranty service involves the exchange of a Machine or part the item IBM or your reseller replaces becomes its property and the replacement becomes yours You represent that all removed items are genuine and unaltered The replacement may not be new but will be in good working order and at least functionally equivalent to the item replaced The replacement assumes the warranty service status of the replaced item Any feature conversion or upgrade IBM or your reseller services must be installed on a Machine which is 1 for certain Machines the designated serial numbered Machine and 2 at an engineering change level compatible with the feature conversion or upgrade Many features conversions or upgrades involve the removal of parts and their return to IBM part that replaces a removed part will assume the warranty service status of the removed part Before IBM or your reseller exchanges a Machine or part you agree to remove all features parts options alterations and attachments not under
21. C IBMIDECD SYS D IBMCD100 IP xxx yy This parameter specifies the address and interrupt level of the port to which the IDE CD ROM drive is connected Part 2 Appendixes 2 13 A n U n L xx T n 2 14 The device driver automatically checks the industry standard primary IDE port address 1F0 interrupt 14 and secondary IDE port address 170 interrupt 15 The P parameter is not needed if your CD ROM drive is connected to either of these ports However if your computer or IDE adapter uses different IDE port addresses or interrupts you must use this option Refer to the instructions that come with your computer or IDE adapter for more information about the configuration of your computer or adapter xxx is the base address of the IDE port 1F0 for the primary IDE port Port 1 170 for the secondary IDE port Port 2 yy is the interrupt IRQ level 14 for the primary IDE port Port 1 15 or 10 for the secondary IDE port Port 2 When four drives are connected for example the syntax in the CONFIG SYS file would be DEVICE C IBMIDECD SYS D IBMCD100 P 1F0 14 P 170 15 1 0 12 P 160 10 Do not truncate the actual device driver entry Place the complete DEVICE on one line in the CONFIG SYS file This parameter specifies the audio play mode For a stereo CD you can type A 0 or A 1 For a monaural CD left or right channel only type A 1 in order to play the monaural audio signal from the right and le
22. E C IBMIDECD SYS D IDE CD DEVICE C IBMCDROM SYS D SCSI CD and your AUTOEXEC BAT file could include this statement C MSCDEX D IDE CD D SCSI CD Part 2 Appendixes 2 15 M nn E IV This parameter specifies the number of sector buffers for temporary storage of the most recent CD data For example to specify 12 sector buffers you would use C MSCDEX EXE D IBMCD100 M 12 The CDSETUP program sets this value to 10 The default value for MSCDEX with no M parameter is 4 You can improve CD ROM drive performance when you use larger default values However each buffer uses about 2 KB of memory and too many buffer specifications might slow down your computer or interfere with other programs that have large memory usage requirements You might be able to specify a larger number of buffers to enhance CD ROM drive performance without adversely affecting programs that have large memory usage requirements if you use expanded memory see the E option in this section or if you load MSCDEX EXE into high memory using instructions given in the documentation that comes with your operating system or with the memory manager This parameter instructs the computer to use expanded memory if available For example C MSCDEX EXE D IBMCD100 E Note that you must first load an expanded memory device driver before using this option If no expanded memory device driver is loaded the following error message displays Expanded Memory not
23. ME file on the IBM Option Diskette for more information The computer does not recognize the CD RW drive after the device drivers are loaded DOS and Windows 3 X Check for incompatibilities among the CD RW drive device driver and other device drivers or other hardware in your computer Create a System Diskette with minimum CONFIG SYS and AUTOEXEC BAT system files 1 Before creating special CONFIG SYS and AUTOEXEC BAT files make a backup copy of these files in a preferred directory Type x copy CONFIG SYS CONFIG IBM where x is the directory drive letter and press Enter Type x copy AUTOEXEC BAT AUTOEXEC IBM where x is the directory drive letter and press Enter 2 Create a System Diskette and copy the device drivers onto it using the following instructions a b Insert a blank diskette into the diskette drive At the DOS prompt type format a s and press Enter The s parameter creates the System Diskette Follow the instructions on the screen When the format process completes copy the C IBMIDECD SYS and CAMSCDEX files from the hard disk to the System Diskette Using a text editor create a minimum CONFIG SYS system file on the System Diskette to support only a CD RW drive The following procedure uses the E text editor to create the CONFIG SYS file from the A prompt 1 Type e config sys and press Enter 2 In the editor type lastdrive z and press Enter 3 Type device a ibmidecd sys d ibmcd100 and press Ente
24. Next twice The Format Disc window opens Attention Formatting completes in about 30 minutes The DirectCD program configures the disc to receive data verifies the integrity of the disc surface and writes DirectCD file system structures to the disc You can do other tasks on your computer while the disc is being formatted 3 Click Next to continue The Name Your Disc window opens 5 Some CDs such as multisession CDs do not require formatting For more information see the Adaptec software online user s guide Part 1 Installation and usage guide 1 13 4 Type the title of your disc in the Name Your Disc window The disc name can be up to 11 characters 5 If you plan to use data compression software with this disc click to check the box next to the message Enable compression on this disc 6 Click Finish in order to start disc formatting When the disc is finished formatting the Disc Ready window opens 7 Click OK in the Disc Ready window You can now write information to the disc Note If you have a problem formatting a CD RW disc go to Appendix B Problem solving on page 2 5 If you want to read a DirectCD formatted disc in another computer that has a MR multi read drive you might have to install the UDF Reader program on the other computer Creating data CDs To create data CDs 1 Click Start gt Programs gt Adaptec Easy CD Creator gt Create CD 2 When the Easy CD Creator window op
25. TY CLAIMS AGAINST YOU FOR DAMAGES OTHER THAN THOSE UNDER THE FIRST ITEM LISTED ABOVE 2 LOSS OF OR DAMAGE TO YOUR RECORDS OR DATA OR 3 SPECIAL INCIDENTAL OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES INCLUDING LOST PROFITS OR SAVINGS EVEN IF IBM ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL 2 24 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU IBM Statement of Warranty Worldwide except Canada Puerto Rico Turkey United States Part 1 General Terms This Statement of Warranty includes Part 1 General Terms and Part 2 Country unique Terms The terms of Part 2 may replace or modify those of Part 1 The warranties provided by IBM in this Statement of Warranty apply only to Machines you purchase for your use and not for resale from IBM or your reseller The term Machine means an IBM machine its features conversions upgrades elements or accessories or any combination of them The term Machine does not include any software programs whether pre loaded with the Machine installed subsequently or otherwise Unless IBM specifies otherwise the following warranties apply only in the country where you acquire the Machine Nothing in this Statement of Warranty affects any statutory rights of consumers that cannot be waived or limite
26. aptec Easy CD Creator DirectCD CD contains programs that work with Windows 98 Windows 95 Windows 2000 and Windows NT Workstation 4 0 You can use the programs with your CD RW drive to create audio and data CDs to copy CDs and to make jewel case inserts or CD labels This manual will give you basic instructions on using the software so that you can get started creating CDs Additional information about the software and how to use it can be found in the online user s guide on the software disc The BM Option Diskette contains device drivers for Windows 98 Windows 95 Windows NT 4 0 Windows 3 x OS 28 and DOS that enable you to access the drive as a CD ROM drive in DOS mode The diskette also includes an audio CD player program for DOS and a diagnostic program Note The software included in this option kit does not enable the drive s CD recording capabilities with DOS Windows 3 x or OS 2 operating systems Before you begin Read the following information before you start your installation You must complete the following steps to install the drive 1 Determine which IDE port to use and the corresponding configuration setting Place or change the configuration jumper on the drive and possibly make changes to the configuration jumpers of other devices 3 Install the drive in a drive bay 4 Configure the system 5 Install a device driver If you do not understand these procedures or are unsure about your ability to perfor
27. are Note Be sure to see the README file for the latest information about the Easy CD Creator DirectCD software The Easy CD Creator DirectCD CD contains the following programs e Easy CD Creator e DirectCD e UDF Reader To fully use the capabilities of your CD RW drive you need to install both the Easy CD Creator and DirectCD programs If you also have a MR multi read CD ROM or DVD ROM drive in your computer you might need to install the UDF Reader program to read certain CD R or CD RW discs in these drives To install the Easy CD Creator DirectCD software for Windows 98 Windows 95 Windows 2000 or Windows NT 4 0 1 Insert the Easy CD Creator DirectCD CD into your CD RW drive 2 If the Adaptec Easy CD Creator Installation window opens follow the onscreen instructions If not continue to the next step 3 Click Start gt Settings gt Control Panel Double click Add Remove Programs 5 Follow the on screen instructions to complete the installation Repeat as necessary to install each of the Easy CD Creator DirectCD and UDF Reader components 6 Restart your operating system B Part 1 Installation and usage guide 1 9 Using CD R and CD RW discs The CD RW drive can write to both CD R and CD RW discs CD R discs cannot be erased but can be used with standard CD ROM drives and CD players You can use CD R discs to record audio tracks store data archive files and copy files from another CD CD RW dis
28. arks or registered trademarks of Microsoft Corporation in the United States or other countries or both Intel and Pentium are trademarks of Intel Corporation in the United States or other countries or both Other company product and service names may be trademarks or service marks of others Part 2 Appendixes 2 33 Electronic emission notices IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit Federal Communications Commission FCC Statement Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connect
29. ay vary depending on operating environment Part 1 Installation and usage guide 1 3 Front view of the drive Refer to the illustration to identify parts that might be referred to in the installation instructions El Headphone jack This jack provides audio output to the headphones Volume control This dial controls the headphone volume CD tray This tray is where you load and unload a CD El Busy indicator This light comes on when the drive reads from writes to or plays a CD El Manual eject hole This hole provides access to the eject mechanism to remove a CD from the drive 3 Eject Load button This button opens and closes the CD tray when you push it Back view of the drive Refer to the illustration to identify parts that might be referred to in the installation instructions Se Reserved Audio out connector This port connects the CD RW drive to a sound adapter 1 4 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit Configuration pins These pins are used to set the drive configuration IDE connector This port connects the CD RW drive to the IDE cable DC power connector This port connects the CD RW drive to the computer power supply cord Installing the drive Follow these steps to install the CD RW drive into your computer Step 1 Opening the computer 1 Turn off the computer and all attached
30. be found Before checking the CONFIG SYS and AUTOEXEC BAT files make a backup copy of these files in a preferred directory 1 10 At the DOS prompt a Type x copy CONFIG SYS CONFIG IBM where x is the directory drive letter and press Enter b Type x copy AUTOEXEC BAT AUTOEXEC IBM where x is the directory drive letter and press Enter Use a text editor such as E or Edit At the DOS prompt type E or your editor name CONFIG SYS and press Enter Insert the following line at the top of the CONFIG SYS file to allow for more than five drive letters if needed lastdrive z Check for the following device driver line DEVICEHIGH C VIBMIDECD SYS D IBMCD100 If this line is not present add it Save the CONFIG SYS file and exit Type E or your editor name AUTOEXEC BAT and press Enter Check for the following device driver line LH C MSCDEX D IBMCD100 M 10 If this line is not present add it If the Windows screen automatically opens when you start your computer check that the line LH C MSCDEX D IBMCD100 M 10 comes before the line that starts Windows WIN If not move the MSCDEX statement above this line in the file Save the AUTOEXEC BAT file and exit Make sure that the device drivers are on the hard disk and are displayed in the correct directory as shown CMBMIDECD SYS CAMSCDEX 2 8 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit If the device drivers are not present reinstall them See the READ
31. ce by IBM in respect of the subject matter of this Statement of Warranty will be limited to the charge paid by you for the individual Machine that is the subject of your claim from IBM TURKIYE Production Status The following replaces this Section IBM fulfils customer orders for IBM Machines as newly manufactured in accordance with IBM s production standards UNITED KINGDOM Limitation of Liability The following replaces items 1 and 2 of the first paragraph of this Section 1 death or personal injury or physical damage to your real property solely caused by IBM s negligence 2 the amount of any other actual direct damages or loss up to the greater of Pounds Sterling 150 000 or 125 percent of the charges if recurring the 12 months charges apply for the Machine that is the subject of the claim or which otherwise gives rise to the claim The following item is added to this paragraph 3 breach of IBM s obligations implied by Section 12 of the Sale of Goods Act 1979 or Section 2 of the Supply of Goods and Services Act 1982 Applicability of suppliers and resellers unchanged The following is added to the end of this Section IBM s entire liability and your sole remedy whether in contract or in tort in respect of any default will be limited to damages NORTH AMERICA CANADA Warranty Service The following is added to this Section To obtain warranty service from IBM call 1 800 565 3344 2 30 IBM 4X 8X 32X CD ReWritable Inter
32. cs can be erased and rewritten but can be used only with newer MR multi read and CD RW compatible CD ROM and DVD ROM drives You can use CD RW discs to back up store and update files or to copy files from another CD Note CD R discs are playable on audio CD players CD RW discs are not playable on most audio CD players Using the drive This section will give you information on how to handle and care for CDs and your CD RW drive how to load CDs into your CD RW drive and how to get started using the Easy CD Creator and DirectCD programs Handling and caring for a CD CDs are high density media that must be handled with care and kept clean to insure that they remain readable These precautions will help to prolong the life of your CDs Attention Wiping a CD using a circular motion might cause loss of data RER VS e Handle the CD by the edges or by the center hole Do not touch the surface of the CD remove dust or fingerprints wipe the CD from the center to the edge with a soft lint free cloth 1 10 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit e Do not write on the surface e Do not place the CD in direct sunlight e not use commercial cleaners to clean the CD e Do not bend the CD Caring for the CD RW drive To protect your CD RW drive during operation observe the following precautions e Remove any CD in the drive before moving the drive e Do not insert foreign
33. d Romania Russia Slovak Republic Slovenia and Ukraine The following terms apply to the country specified EGYPT Limitation of Liability The following replaces item 2 in this Section 2 as to any other actual direct damages IBM s liability will be limited to the total amount you paid for the Machine that is the subject of the claim Applicability of suppliers and resellers unchanged FRANCE Limitation of Liability The following replaces the second sentence of the first paragraph of this Section In such instances regardless of the basis on which you are entitled to claim damages from IBM IBM is liable for no more than items 1 and 2 unchanged GERMANY The IBM Warranty for Machines The following replaces the first sentence of the first paragraph of this Section The warranty for an IBM Machine covers the functionality of the Machine for its normal use and the Machine s conformity to its Specifications The following paragraphs are added to this Section The minimum warranty period for Machines is six months In case IBM or your reseller are unable to repair an IBM Machine you can alternatively ask for a partial refund as far as justified by the reduced value of the unrepaired Machine or ask for a cancellation of the respective agreement for such Machine and get your money refunded Extent of Warranty The second paragraph does not apply Warranty Service The following is added to this Section During the warranty pe
34. d by contract If you have any questions contact IBM or your reseller Machine IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit Warranty Period One Year Contact your place of purchase for warranty service information Some IBM Machines are eligible for On site warranty service depending on the country where service is performed The IBM Warranty for Machines IBM warrants that each Machine 1 is free from defects in materials and workmanship and 2 conforms to IBM s Official Published Specifications The warranty period for a Machine is a specified fixed period commencing on its Date of Installation The date on your sales receipt is the Date of Installation unless IBM or your reseller informs you otherwise During the warranty period IBM or your reseller if approved by IBM to provide warranty service will provide repair and exchange service for the Machine without charge under the type of service designated for the Machine and will manage and install engineering changes that apply to the Machine If a Machine does not function as warranted during the warranty period and IBM or your reseller are unable to either 1 make it do so or 2 replace it with one that is at least functionally equivalent you may return it to your place of purchase and your money will be refunded The replacement may not be new but will be in good working order Extent of Warranty The warranty does not cover the repair or exchange of a Mach
35. devices 2 Unplug the power cords for the computer and all attached devices 3 Remove the cover from the computer Step 2 Unpacking the drive 1 Before opening the antistatic bag that the drive is packed in touch it to an unpainted metal surface for at least two seconds This drains the static electricity from the package and your body 2 Remove the drive from the bag If you must put the drive down place the antistatic bag on a flat padded surface such as a magazine and place the drive on the antistatic bag Step 3 Selecting an IDE port Newer computers typically have two IDE ports each of which can support two devices Typically the IDE port connected to your hard disk drive is the primary IDE port The other IDE port is the secondary port The IDE port and the cable position that you select determine which configuration jumper setting you use for the drive e If you have two IDE ports connect the CD RW drive to the secondary IDE port on your system board or IDE adapter If the CD RW drive is the only device on the secondary IDE port use the master configuration setting If the CD RW drive is the second device on the secondary port use the subordinate or slave configuration setting e If you must attach the CD RW drive to the primary IDE port the same port as a hard disk drive or other fast device use the subordinate setting for the CD RW drive and the master setting for the faster device In some instances you m
36. dio Click Audio CD The window that opens is similar to the Windows Explorer In the top section click to select the audio files or audio tracks you want to add to the CD 5 Click the Add button at the top of the window to add the files to your CD NES For information on advanced features such as making a multisession CD or creating a CD using the File menu instead of the Easy CD Creator Wizard see the Adaptec software online user s guide Part 1 Installation and usage guide 1 29 Making a jewel case insert You can use Easy CD Creator to create a jewel case insert or CD label When you create a data or audio CD the Easy CD Creator program creates a jewel case insert using the information in your CD layout such as CD title artist name and song list To print a jewel case insert or CD label 1 Click Start gt Programs gt Adaptec Easy CD Creator gt Create CD 2 Click Jewel Case Creator 3 On the left click to select the front cover inside front cover back cover or CD label 4 Make any changes in the main editing window You can change the background theme by clicking the Format menu and selecting Change Themes 5 When you are finished making changes click the File menu and select Print then click OK For more information on changing the information in the Jewel Case Layout window see the Adaptec software online user s guide Backing up a CD Attention The CD Copier program copies files from
37. e on the IDE port is configured as master or master with subordinate present e If you are configuring the CD RW drive as cable select set the jumper to the cable select device setting If there is another device on the IDE port make sure that the second device is also configured for cable select Step 5 Mounting the drive in the bay Attention Be sure to use the M3 x 5 mm mounting screws in the option package Using screws that are too long might damage the drive You can mount the CD RW drive horizontally or vertically in the computer If you mount the drive vertically you must secure any CDs you place into the drive before the drive tray is closed or the CD RW drive will not be able to read the CD properly For further instructions on securing your CDs in a vertically mounted drive go to page 1 12 1 6 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit 1 Slide the drive into the bay Your computer might have specific required procedures for installing storage devices Refer to the documentation that comes with your computer for further instructions 2 Align the drive bay screw holes with the threaded holes in the drive housing or mounting bracket then thread the screws in loosely to check their positions Usually two screws are used on each side 3 Check to make sure the alignment is correct then tighten the screws to secure the drive Do not overtighten Step 6 Attaching the cables to the drive Conn
38. ean that IBM intends to announce such IBM products programming or services in your country Requests for technical information about IBM products should be made to your IBM reseller or IBM marketing representative Copyright International Business Machines Corporation 2000 rights reserved Note to U S Government Users Documentation related to restricted rights Use duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corp Contents Safety Read first 42 xo Sor pr OE RIEN UE iv Registering your option M About this book v Part 1 Installation and usage guide 1 1 Part 2 Appendixes 2 1 Appendix A Product specifications 2 1 Appendix B Problem solving 2 5 Appendix C Customizing device driver configuration settings 2 13 Appendix D Help and service information 2 20 Online technical support 2 20 Telephone technical support Leverer ever ra 2 20 Appendix E Product warranty and notices 2 22 Warranty statements 2 22 Notices uus a Bash eb Se debe i edel fe ene ud 2 32 Trademarks 4 ada kp eu We ee est 2 33 Electronic emission notices 2 34 O Copyright IBM Corp 2000
39. ect the CD through the software 2 Use the Eject Load button 3 Turn off the computer Wait 45 seconds then turn on the computer and try using the Eject Load button again 4 If other methods do not work use the manual eject hole using instructions given in Manually ejecting a CD on page 1 13 2 6 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit You cannot read from the CD after successfully writing to it Take the following actions 1 If you can read the CD in another CD player or you can see previous sessions the directory information might be damaged on the volume making it unreadable Check the Adaptec software online user s guide for more troubleshooting ideas 2 You might have a damaged CD R or CD RW disc Try a new CD R disc or CD RW disc or another brand of disc 3 If you can read from a CD RW disc in the CD RW drive but not in another MR drive be sure that a UDF Reader program is installed on the computer which contains the other MR drive For more information on installing the UDF Reader program go to Step 11 Installing the Easy CD Creator DirectCD software on page 1 9 4 Verify that you are not attempting to write the disc under extreme environmental conditions such as the following e low temperature 5 C 41 F or below e high temperature 45 C 113 F or above e excessive shock gt 0 5 G e excessive vibration gt 0 1 G You cannot access the CD RW drive or the drive icon does not disp
40. ect the cables to the CD RW drive as follows 1 If you want to connect the CD RW drive to your sound adapter or to the sound function on your system board locate the included audio cables and determine which cable best fits the CD audio in port on your sound adapter Connect one end of the selected audio cable to the CD RW drive audio out connector El and the other end of the cable to your sound adapter CD audio in port Save the other cable in case you use a different sound adapter in the future 2 Attach a 40 pin IDE cable connector to the IDE connector on the drive Align the cable so that the color coded edge is closest to the power cable connector Use the IDE cable provided with this option if there is no cable attached to the IDE port or if there is only one device connector on the IDE cable If you use the included IDE cable attach one end of the cable to your system board IDE port or to your IDE adapter and the other end of the IDE cable to the CD RW drive 3 Locate one of the available power cords attached to your computer power source Attach the four pin power cable to the CD RW drive dc power connector Part 1 Installation and usage guide 1 7 Step 7 Completing the hardware installation Be sure that the drive is securely mounted and the connectors are firmly attached 2 Be sure that the cables do not interfere with the computer cover and do not block the power supply fan blades or air flow paths 3 Reinsta
41. ed e Consult an IBM authorized dealer or service representative for help Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits Proper cables and connectors are available from IBM authorized dealers IBM is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment Unauthorized changes or modifications could void the user s authority to operate the equipment This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Responsible Party International Business Machines Corporation New Orchard Road Armonk NY 10504 Telephone 1 919 543 2193 Tested To Comply C With FCC Standards FOR HOME OR OFFICE USE Industry Canada Class B emission compliance statement This Class B digital apparatus complies with Canadian ICES 003 2 34 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit Avis de conformit la r glementation d Industrie Canada Cet appareil num rique de classe B est conforme la norme NMB 003 du Canada Deutsche EMV Direktive electromagnetische Vertr glichkeit Dieses Ger t ist berechtigt in bereinstimmung mit dem deutschen EMVG v
42. ens click Data 3 Click Data CD Note If you click DirectCD instead of Data CD the Easy CD Creator program will close and the DirectCD Wizard will open instead 4 The window that opens is similar to the Windows Explorer In the top section click to select the files or directories you want to add to the CD 5 Click the Add button at the top of the window to add the files to your CD For information on advanced features such as making a multisession CD or creating a CD using the File menu instead of the Easy CD Creator Wizard see the Adaptec software online user s guide Creating audio CDs To create audio CDs Click Start gt Programs gt Adaptec Easy CD Creator gt Create CD When the Easy CD Creator window opens click Audio Click Audio CD The window that opens is similar to the Windows Explorer In the top section click to select the audio files or audio tracks you want to add to the CD 5 Click the Add button at the top of the window to add the files to your CD A co B er For information on advanced features such as making a multisession CD or creating a CD using the File menu instead of the Easy CD Creator Wizard see the Adaptec software online user s guide 1 14 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit Making a jewel case insert You can use Easy CD Creator to create a jewel case insert or CD label When you create a data or audio CD the Easy CD Creator program creates a jewel case inser
43. er Click Setup Follow the on screen instructions to install the software Click Exit after software installation completes Restart your computer so the new settings take effect NR CIO es Part 1 Installation and usage guide 1 23 Windows NT 4 0 will automatically detect the presence of the drive No additional steps are required to activate the device drivers For optional information about configuring the JBM Option Diskette device drivers for Windows 3 x DOS OS 2 Windows 98 and Windows 95 go to Appendix C Customizing device driver configuration settings on page 2 13 Step 11 Installing the Easy CD Creator DirectCD software Note Be sure to see the README file on the Adaptec Easy CD Creator DirectCD CD for the latest information about the Easy CD Creator DirectCD software The Easy CD Creator DirectCD CD contains the following programs e Easy CD Creator e DirectCD e UDF Reader To fully use the capabilities of your CD RW drive you need to install both the Easy CD Creator and DirectCD programs If you also have a MR multi read CD ROM or DVD ROM drive in your computer you might need to install the UDF Reader program to read certain CD R or CD RW discs in these drives To install the Easy CD Creator DirectCD software for Windows 98 Windows 95 Windows 2000 or Windows NT 4 0 1 Insert the Easy CD Creator DirectCD CD into your CD RW drive 2 If the Adaptec Easy CD Creator Installation window o
44. errupted or error free operation of a Machine Unless specified otherwise IBM provides non IBM machines WITHOUT WARRANTIES OF ANY KIND Any technical or other support provided for a Machine under warranty such as assistance via telephone with how to questions and those regarding Machine set up and installation will be provided WITHOUT WARRANTIES OF ANY KIND Warranty Service To obtain warranty service for the Machine contact your reseller or IBM In the United States call IBM at 1 800 772 2227 In Canada call IBM at 1 800 565 3344 You may be required to present proof of purchase IBM or your reseller provides certain types of repair and exchange service either at your location or at a service center to keep Machines in or restore them to conformance with their Specifications IBM or your reseller will inform you of the available types of service for a Machine based on its country of installation IBM may repair the failing Machine or exchange it at its discretion When warranty service involves the exchange of a Machine or part the item IBM or your reseller replaces becomes its property and the replacement becomes yours You represent that all removed items are genuine and unaltered The replacement may not be new but will be in good working order and at least functionally equivalent to the item replaced The replacement assumes the warranty service status of the replaced item Any feature conversion or upgrade IBM or yo
45. ersions upgrades elements or accessories or any combination of them The term Machine does not include any software programs whether pre loaded with the Machine installed subsequently or otherwise Unless IBM specifies otherwise the following warranties apply only in the country where you acquire the Machine Nothing in this Statement of Warranty affects any statutory rights of consumers that cannot be waived or limited by contract If you have any questions contact IBM or your reseller Machine IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit Warranty Period One Year Contact your place of purchase for warranty service information Some IBM Machines are eligible for On site warranty service depending on the country where service is performed The IBM Warranty for Machines IBM warrants that each Machine 1 is free from defects in materials and workmanship and 2 conforms to IBM s Official Published Specifications The warranty period for a Machine is a specified fixed period commencing on its Date of Installation The date on your sales receipt is the Date of Installation unless IBM or your reseller informs you otherwise During the warranty period IBM or your reseller if approved by IBM to provide warranty service will provide repair and exchange service for the Machine without charge under the type of service designated for the Machine and will manage and install engineering changes that apply to the Machine
46. find any problems reconnect the interface cable Replace the computer cover and reattach all cables and power cords Turn on the computer restart the system and attempt to open the CD tray by pressing the Eject Load button If the tray fails to open and the busy indicator light does not come on turn off the computer and try using another 4 pin dc power cable 5 Check that the color coded edge on the IDE cable aligns with pin 1 on the IDE port and is closest to the power cable on the CD RW drive See Step 3 Selecting an IDE port on page 1 5 6 Check that the IDE cable is connected to the proper IDE port connection See Step 3 Selecting an IDE port on page 1 5 for more information 7 Check the CD RW drive and any other device on the IDE cable for the proper Master Slave jumper settings See Step 3 Selecting an IDE port on page 1 5 for more information 8 If the middle connector on the IDE cable is attached to the IDE port on the system board remove the connector and reattach the cable If there is only one device on the IDE port attach the connector at one end of the cable to the IDE port and the connector at the other end to the device leaving the middle connector if there is one open Part 2 Appendixes 2 5 If there are two devices on the IDE port attach the connector at one end of the cable to the IDE port If there is a hard disk drive attach it to the connector at the other end of the cable and attach the CD RW dri
47. for Windows 3 x DOS OS 2 and Windows 98 and 95 Use the online help during the installation and refer to the READ ME file on the IBM Option Diskette for additional information Requirements vary and you might need to customize the configuration that the CDSETUP program installed on your computer This section provides information and describes parameters that you might need to change or add for your installation Changing device driver parameters for DOS and Windows 3 x Most computers will function adequately with the default settings for the IBMIDECD SYS device driver file However there are some parameters that can be changed if necessary This section explains the function of each parameter Use a text editor to modify the appropriate line in your CONFIG SYS file For the IBMIDECD SYS device driver file the line in CONFIG SYS is in the following format DEVICE drive path IBMIDECD SYS D device name P xxx yy A n U n L xx T n I n Do not truncate the actual device driver entry Place the complete DEVICE on one line in the CONFIG SYS file drive path IBMIDECD SYS The above parameter specifies the location drive and directory and name of the device driver file Use the following options to configure the device driver D device name This parameter specifies the device name of the CD ROM drive This name must be identical to the device name specified in the MSCDEX EXE parameters as shown DEVICE
48. ft channels The default is n 0 This parameter specifies if your computer initializes with the CD tray unlocked or locked U 0 initializes with the tray unlocked U 1 initializes with the tray locked The default command is n 0 This command might be used if you want to secure your CD in the drive This parameter specifies the message language where xx designates the language US English default does not need to be specified GR German FR French SP Spanish IT Italian JP Japanese This parameter specifies time delays to be built into the IDE read loop Use this parameter only in computers that do not support the IOCHRDY signal on the IDE bus and in computers that read from the IDE port faster than the IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit CD ROM can provide data This parameter is usually not required in most computers n is a relative timing parameter that depends on processor speed When the value of n increases the drive data transfer rate decreases Valid values for n are 0 through 99 The default for n is 0 and the T parameter is not required This parameter enables interrupt sharing If n 1 interrupt sharing is enabled If n 0 interrupt sharing is disabled The default value is 0 Set this parameter to enabled when the IDE interrupt must be shared with another device Using Microsoft CD ROM Extensions Microsoft CD ROM Extensions MSCDEX EXE is an executable program that works in conjunc
49. g parameters are available IN Instructs the computer to display the installation details IQ Suppresses messages during initialization Changing the OS 2 device driver filter OS 2 uses the device driver filter IBMIDECD FLT for ATAPI IDE CD ROM drives BASEDEV IBMIDECD FLT Options The following parameter is available IN Instructs the computer to display installation details Changing the OS 2 installable file system driver The file system device driver for OS 2 is CDFS IFS The following parameters are available C n Indicates how many 64 KB RAM segments will be used for the sector cache The default is C 2 two 64 KB RAM segments 2 18 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit M n Indicates the maximum number of file sectors to be read at a time The default is eight sectors M 8 K Uses Kanji supplementary volume descriptor Q Suppresses messages during initialization Changing the OS 2 IDE adapter device driver The following IDE device driver is available BASEDEV IBM1S506 ADD for ISA computers This device driver controls IDE hard disk drives and IDE CD ROM drives At the OS 2 command prompt type help IBM1S506 to see the optional parameters that are available for ISA computers Special parameters are required if your computer has an IDE controller that does not use a standard interrupt Check the A and IRQ parameters in the OS 2 help utility Changing the Windows 98 and Windows 95 device d
50. ia di compatibilit elettromagnetica IBM non accetta responsabilit alcuna per la mancata conformit alle normative di protezione dovuta a modifiche non consigliate al prodotto compresa l installazione di schede e componenti di marca diversa da IBM Le prove effettuate sul presente prodotto hanno accertato che esso rientra nei limiti stabiliti per le le apparecchiature di informatica Classe B ai sensi del CISPR 22 Norma Europea EN 55022 I limiti delle apparecchiature della Classe B sono stati stabiliti al fine di fornire ragionevole protezione da interferenze mediante dispositivi di comunicazione in concessione in ambienti residenziali tipici COEN eet hm MN VCCI D I ETS 772BRBAMRE CT CORB FERRE D E ELTUETA TOREDIG STOT LEY URI L CRA ENS E O ESE RAE CES CIE LUV U RU LC E US 2 36 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit Part Number 09N4076 Printed in U S A
51. ight need to change the hard disk drive configuration setting to master with subordinate present when attaching a subordinate device on the same cable For further information on setting configuration jumpers on other devices Part 1 Installation and usage guide 1 5 refer to the documentation that comes with your computer or with the device in question Some non IBM computers support the cable select setting where the position of the device on the cable determines whether a device is master or subordinate See the documentation that comes with your computer to determine if your computer supports this setting Step 4 Setting the configuration jumper GA VS O 00000000000000000000 0 pooo 9 00000000000000000000 0000 The illustration shows the master Fl setting the subordinate or slave setting and the cable select setting Configure the CD RW drive by placing the jumper over the set of pins corresponding to the setting you chose in Step 3 Selecting an IDE port e If you are configuring the CD RW drive as master set the jumper to the master El device setting This is how the drive is set when it is shipped If there is a second device on the IDE port make sure that device is configured as subordinate e If you are configuring the CD RW drive as subordinate set the jumper to the subordinate J device setting Make sure that the other devic
52. iii Safety Read first Before installing this product read the Safety Information Antes de instalar este produto leia as Informa es de Seguranga FRA HJT MAS Safety Information HAE Prije instalacije ovog produkta obavezno pro itajte Sigurnosne P ed instalac tohoto produktu si p e t te p ru ku bezpe nostn ch instrukc L s sikkerhedsforskrifterne f r du installerer dette produkt Ennen kuin asennat t m n tuotteen lue turvaohjeet kohdasta Safety Information Avant d installer ce produit lisez les consignes de s curit Vor der Installation dieses Produkts die Sicherheitshinweise lesen eykataotroete aut SiaBdote TIG T NPOPOPIEG aop sa safety information term k telep t se el tt olvassa el a Biztons gi el r sokat Prima di installare questo prodotto leggere le Informazioni sulla Sicurezza HERRERA lt ESL AU CA APS ACSA ce Lees voordat u dit product installeert eerst de veiligheidsvoorschriften Les sikkerhetsinformasjonen Safety Information for du installerer dette produktet Przed zainstalowaniem tego produktu nale y zapozna sig z ksi k Informacje dotycz ce bezpiecze stwa Safety Information Antes de instalar este produto leia as Informa es sobre Seguran
53. in Read the following information before you start your installation You must complete the following steps to install the drive 1 Determine which IDE port to use and the corresponding configuration setting Place or change the configuration jumper on the drive and possibly make changes to the configuration jumpers of other devices 3 Install the drive in a drive bay 4 Configure the system 5 Install a device driver If you do not understand these procedures or are unsure about your ability to perform all the procedures described have a qualified computer technician install the CD RW drive for you System requirements Part 1 Installation and usage guide 1 17 Before you begin installing the drive be sure your computer meets the following system requirements e Minimum microprocessor Intel Pentium processor or the equivalent e Minimum RAM 16 MB e 3 5 inch diskette drive e Available IDE connection e Available internal power connection e Available drive bay e One of the following operating systems DOS 6 0 or later Microsoft Windows NT Workstation 4 0 Microsoft Windows 95 or Windows 98 Microsoft Windows 2000 05 2 3 0 or later You might need a flathead or phillips screwdriver to complete the installation You might also need to refer to the documentation that comes with your computer Be sure to have the documentation available Handling instructions To protect your CD RW drive duri
54. ine resulting from misuse accident modification unsuitable physical or operating environment improper maintenance by you or failure caused by a product for which IBM is not responsible The warranty is voided by removal or alteration of Machine or parts identification labels THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND REPLACE ALL OTHER WARRANTIES OR CONDITIONS EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THESE WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS Part 2 Appendixes 2 25 WHICH VARY FROM JURISDICTION TO JURISDICTION SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF EXPRESS OR IMPLIED WARRANTIES SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU IN THAT EVENT SUCH WARRANTIES ARE LIMITED IN DURATION TO THE WARRANTY PERIOD NO WARRANTIES APPLY AFTER THAT PERIOD Items Not Covered by Warranty IBM does not warrant uninterrupted or error free operation of a Machine Unless specified otherwise IBM provides non IBM machines WITHOUT WARRANTIES OF ANY KIND Any technical or other support provided for a Machine under warranty such as assistance via telephone with how to questions and those regarding Machine set up and installation will be provided WITHOUT WARRANTIES OF ANY KIND Warranty Service To obtain warranty service for the Machine contact your reseller or I
55. it les conditions de l quipement informatique de Classe B en vertu de CISPR22 Standard europ en EN 55022 Les conditions pour l quipement de Classe B ont t d finies en fonction d un contexte r sidentiel ordinaire afin de fournir une protection raisonnable contre l interf rence d appareils de communication autoris s Part 2 Appendixes 2 35 Unione Europea Directiva EMC Conformidad lectromagn tica Este producto satisface los requisitos de protecci n del Consejo de la UE Directiva 89 336 CEE en lo que a la legislatura de los Estados Miembros sobre compatibilidad electromagn tica se refiere IBM no puede aceptar responsabilidad alguna si este producto deja de satisfacer dichos requisitos de protecci n como resultado de una modificaci n no recomendada del producto incluyendo el ajuste de tarjetas de opci n que no sean IBM Este producto ha sido probado y satisface los l mites para Equipos Inform ticos Clase B de conformidad con el Est ndar CISPR22 y el Est ndar Europeo EN 55022 Los l mites para los equipos de Clase B se han establecido para entornos residenciales t picos a fin de proporcionar una protecci n razonable contra las interferencias con dispositivos de comunicaci n licenciados Union Europea Normativa EMC Questo prodotto conforme alle normative di protezione ai sensi della Direttiva del Consiglio dell Unione Europea 89 336 CEE sull armonizzazione legislativa degli stati membri in mater
56. lay Windows 98 or 95 If the CD RW drive has been properly installed there will be an icon for the drive in the My Computer window If you double click the My Computer icon and there is no drive icon present in the displayed window make sure that the drive has been properly installed and that the configuration jumper has been correctly set For more information see Step 4 Setting the configuration jumper on page 1 6 Next restart your system If a drive icon is still not found continue with the following steps 1 Click Start and select Settings The Settings window will open 2 Click Control Panel 3 Click System 4 Click the Device Manager tab 5 Double click View Devices by Type a Click Hard Disk Controllers on the Device Manager list Make sure that there are no conflicts with the controller Be sure that the device status indicates that the controller is working properly b Select CD RW from the Device Manager list Verify that there is a CD RW device and that no conflicts exist The device status will indicate that the device is working properly 6 Click OK Part 2 Appendixes 2 7 7A Restart the computer If the device icon is still not present check cable connections device jumper settings and resolve any existing conflicts You cannot access the CD RW drive DOS and Windows 3 x or the drive icon Windows 3 x does not display Your CD RW drive device driver might not be loaded or cannot
57. life of your CDs Attention Wiping a CD using a circular motion might cause loss of data tr VS e Handle the CD by the edges or by the center hole Do not touch the surface of the CD remove dust or fingerprints wipe the CD from the center to the edge with a soft lint free cloth e Do not write on the surface e Do not place the CD in direct sunlight e not use commercial cleaners to clean the CD Do not bend the CD Part 1 Installation and usage guide 1 25 Caring for the CD RW drive To protect your CD RW drive during operation observe the following precautions e Remove any CD in the drive before moving the drive e Do not insert foreign objects into the drive Do not stack objects on the drive e Do not remove the drive cover or attempt to service the drive Do not operate the drive under any of the following conditions A High temperature high humidity or direct sunlight Excessive vibration sudden shock or inclined surface Excessive dust Loading a CD To load a CD into a horizontally mounted CD RW drive follow these steps 1 Press the Eject Load button The tray slides out of the drive 2 Insert the CD into the loading tray with the label facing up 3 Close the loading tray by pressing the Eject Load button or by gently pushing the tray in Attention Do not force the tray to open do not insert foreign objects into the CD tray If your
58. ll the computer cover 4 Reconnect all devices and check any devices that might have become disconnected such as the keyboard mouse and monitor 5 Plug all power cords into electrical outlets Step 8 Attaching the faceplates This option package includes two faceplates that conform to the curved design of certain computers If your computer has a curved design you can attach one of the included faceplates so that the front of the CD RW drive matches the exterior cabinet Choose the faceplate that best fits your computer and attach it after you have mounted the CD RW drive in the appropriate bay Note Depending on the exterior design of your computer you may need to attach the faceplate before placing the cover back on your computer Step 9 Updating your computer configuration After you have completed the hardware installation restart your computer Usually the configuration setup information screen is displayed If this screen is not displayed check your computer documentation for information about accessing the configuration or setup utility program To see the configuration information for most IBM computers press F1 during startup When you have finished reviewing the information save the changes and exit Note Some older computers with one IDE port might not display the CD RW drive information when you review the configuration setup information You still can use the CD RW drive in this situation if you have
59. m all the procedures described have a qualified computer technician install the CD RW drive for you 1 2 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit System requirements Before you begin installing the drive be sure your computer meets the following system requirements e Minimum microprocessor Intel Pentium processor or the equivalent e Minimum RAM 16 MB e 3 5 diskette drive e Available IDE connection e Available internal power connection e Available drive bay e One of the following operating systems Microsoft Windows NT Workstation 4 0 Microsoft Windows 95 or Windows 98 Microsoft Windows 2000 You may need a flathead or phillips screwdriver to complete the installation You may also need to refer to the documentation that comes with your computer Be sure to have the documentation available Handling instructions To protect your CD RW drive during installation observe the following precautions e Handle the drive with care Dropping or jarring the drive can damage the components inside the drive housing e Keep the CD RW drive in its antistatic bag until you are ready to install the drive in your computer Limit your movement Movement can cause static electricity buildup e Do not force insertion of the power cable Doing so might damage the connector or the drive When referring to memory storage capacity MB means approximately 1000000 bytes total user accessible capacity m
60. nal IDE Option Kit UNITED STATES OF AMERICA Warranty Service The following is added to this Section To obtain warranty service from IBM call 1 800 772 2227 Part 2 Appendixes 2 31 Notices References in this publication to IBM products programs or services do not imply that IBM intends to make these available in all countries in which IBM operates Any reference to an IBM product program or service is not intended to state or imply that only that IBM product program or service may be used Subject to IBM s valid intellectual property or other legally protectable rights any functionally equivalent product program or service may be used instead of the IBM product program or service The evaluation and verification of operation in conjunction with other products except those expressly designated by IBM are the responsibility of the user IBM may have patents or pending patent applications covering subject matter in this document The furnishing of this document does not give you any license to these patents You can send license inquiries in writing to IBM Director of Licensing IBM Corporation 500 Columbus Avenue Thornwood NY 10594 U S A 2 32 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit Trademarks The following terms are trademarks of the IBM Corporation in the United States or other countries or both Extended Services HelpCenter IBM Micro Channel OS 2 Microsoft Windows and Windows NT are tradem
61. ng OPTIONS by IBM Please take a few moments to register your product and provide us with information that will help IBM to better serve you in the future Your feedback is valuable to us in developing products and services that are important to you as well as in developing better ways to communicate with you Register your option on the IBM Web site at http www ibm com pc register IBM will send you information and updates on your registered product unless you indicate on the Web site questionnaire that you do not want to receive further information Product service and warranty information For technical support support hours and warranty terms and conditions see the enclosed inserts or contact your IBM reseller or IBM marketing representative Part 1 Installation and usage guide 1 31 32 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit Part 2 Appendixes This section includes information on product specifications how to solve typical problems how to customize the DOS device driver for this option and how to obtain help and service It also includes the product warranty and legal notices Appendix A Product specifications This appendix includes the the following information e Physical specifications e Power requirements Environmental requirements e Drive write read speeds e Drive performance e Format capabilities Physical specifications The physical specifications of the IBM are listed in the
62. ng installation observe the following precautions e Handle the drive with care Dropping or jarring the drive can damage the components inside the drive housing e Keep the CD RW drive in its antistatic bag until you are ready to install the drive in your computer Limit your movement Movement can cause static electricity buildup e Do not force the insertion of power or signal cables Doing so might damage the connector or the drive Front view of the drive Refer to the following illustration to identify parts that might be referred to in the installation instructions 9 When referring to memory storage capacity MB means approximately 1000000 bytes total user accessible capacity may vary depending on operating environment 1 18 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit El Headphone jack This jack provides audio output to the headphones Volume control This dial controls the headphone volume CD tray This tray is where you load and unload a CD El Busy indicator This light comes on when the drive reads from writes to or plays a CD Manual eject hole This hole provides access to the eject mechanism to remove a CD from the drive 3 Eject Load button This button opens and closes the CD tray when you push it Back view of the drive Refer to the following illustration to identify parts that might be referred to in the installation instructions
63. nor your reseller is responsible for any of your confidential proprietary or personal information contained in a Machine which you return to IBM or your reseller for any reason You should remove all such information from the Machine prior to its return Production Status Each IBM Machine is manufactured from new parts or new and used parts In some cases the Machine may not be new and may have been previously installed Regardless of the Machine s production status IBM s appropriate warranty terms apply Limitation of Liability Circumstances may arise where because of a default on IBM s part or other liability you are entitled to recover damages from IBM In each such instance regardless of the basis on which you are entitled to claim damages from IBM including fundamental breach negligence misrepresentation or other contract or tort claim IBM is liable for no more than 1 damages for bodily injury including death and damage to real property and tangible personal property and 2 the amount of any other actual direct damages up to the greater of U S 100 000 or equivalent in local currency or the charges if recurring 12 months charges apply for the Machine that is the subject of the claim This limit also applies to IBM s suppliers and your reseller It is the maximum for which IBM its suppliers and your reseller are collectively responsible UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF THE FOLLOWING 1 THIRD PAR
64. ntry Unique Terms ASIA PACIFIC AUSTRALIA The IBM Warranty for Machines The following paragraph is added to this Section The warranties specified in this Section are in addition to any rights you may have under the Trade Practices Act 1974 or other legislation and are only limited to the extent permitted by the applicable legislation Extent of Warranty The following replaces the first and second sentences of this Section The warranty does not cover the repair or exchange of a Machine resulting from misuse accident modification unsuitable physical or operating environment operation in other than the Specified Part 2 Appendixes 2 27 Operating Environment improper maintenance by you or failure caused by a product for which IBM is not responsible Limitation of Liability The following is added to this Section Where IBM is in breach of a condition or warranty implied by the Trade Practices Act 1974 IBM s liability is limited to the repair or replacement of the goods or the supply of equivalent goods Where that condition or warranty relates to right to sell quiet possession or clear title or the goods are of a kind ordinarily acquired for personal domestic or household use or consumption then none of the limitations in this paragraph apply PEOPLE S REPUBLIC OF CHINA Governing Law The following is added to this Statement The laws of the State of New York govern this Statement INDIA Limitation of Liability The foll
65. o check the box next to the message Enable compression on this disc 6 Click Finish in order to start disc formatting When the disc is finished formatting the Disc Ready window opens 7 Click OK in the Disc Ready window You can now write information to the disc Note If you have a problem formatting a CD RW disc go to Appendix B Problem solving on page 2 5 If you want to read a DirectCD formatted disc in another computer that has MR multi read drive you might have to install the UDF Reader program on the other computer Creating data CDs To create data CDs 1 Click Start gt Programs gt Adaptec Easy CD Creator gt Create CD 2 When the Easy CD Creator window opens click Data 3 Click Data CD Note If you click DirectCD instead of Data CD the Easy CD Creator program will close and the DirectCD Wizard will open instead 4 The window that opens is similar to the Windows Explorer In the top section click to select the files or directories you want to add to the CD 5 Click the Add button at the top of the window to add the files to your CD For information on advanced features such as making a multisession CD or creating a CD using the File menu instead of the Easy CD Creator Wizard see the Adaptec software online user s guide Creating audio CDs To create audio CDs Click Start gt Programs gt Adaptec Easy CD Creator gt Create CD When the Easy CD Creator window opens click Au
66. oading tray looks like the right illustration insert the CD into the tray and gently push the movable tab forward to hold the CD in place 3 Close the loading tray by pressing the Eject Load button or by gently pushing the tray in 1 12 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit Manually ejecting a CD If you press the Eject Load button and the tray does not slide out turn off the computer and straighten a large paper clip to form a tool as shown in the illustration The straightened end must extend at least 45 mm 1 8 in Insert the extended end into the manual eject hole on the front of the drive see Front view of the drive on page 1 4 Push the paper clip into the hole until the tray opens Gently pull out the tray until you can remove the CD ptm CD Using the Easy CD Creator DirectCD programs To use the Easy CD Creator DirectCD software insert a blank or partially recorded CD R or CD RW disc this option kit includes a blank CD R disc and a blank CD RW disc into your CD RW drive The Easy CD Creator menu window opens automatically To open DirectCD 1 Click Start gt Programs gt Adaptec DirectCD 2 Click DirectCD Wizard Formatting CDs You must format a blank CD RW disc using DirectCD before you can copy files to the disc To format a CD RW disc with the DirectCD program 1 Insert a blank disc included in the drive The DirectCD Wizard Welcome window opens 2 Click
67. om 9 Nov 92 das EG Konformit tszeichen zu f hren Der Aussteller der Konformit tserkl rung ist die IBM UK Greenock Dieses Ger t erf llt die Bedingungen der EN 55022 Klasse B European Union emission directive This product is in conformity with the protection requirements of EU Council Directive 89 366 ECC on the approximation of the laws of the Member States relating to electromagnetic compatibility IBM can not accept responsibility for any failure to satisfy the protection requirements resulting from a non recommended modification of the product including the fitting of non IBM option cards This product has been tested and found to comply with the limits for Class B Information Technology Equipment according to CISPR 22 European Standard EN 55022 The limits for Class B equipment were derived for typical residential environments to provide reasonable protection against interference with licensed communication devices Union Europ enne Directive Conformit lectromagn tique Ce produit est conforme aux exigences de protection de la Directive 89 336 EEC du Conseil de l UE sur le rapprochement des lois des tats membres en mati re de compatibilit lectromagn tique IBM ne peut accepter aucune responsabilit pour le manquement aux exigences de protection r sultant d une modification non recommand e du produit y compris l installation de cartes autres que les cartes IBM Ce produit a t test et il satisfa
68. on a CD R disc in about nine minutes The drive can also read data at up to 32 times the standard CD ROM speed or 9600 KB per second Note To use the drive s CD recording function you must install the Easy CD Creator DirectCD software included for Microsoft Windows 98 Windows 95 or Windows NT 4 0 For more information on the Easy CD Creator DirectCD software see Software description on page 1 2 The IBM can be installed only in a computer that uses the integrated drive electronics IDE or the enhanced IDE architecture In addition to this book the option kit includes e CD RW drive e Two audio cables e Four mounting screws x 5 mm slotted e IDE cable e Two faceplates for use with certain systems 1 KB equals approximately 1024 bytes when referring to data transfer speeds 2 MB equals approximately 1000000 bytes when referring to storage capacity 3 If you purchased the black option kit you will receive one black faceplate O Copyright IBM Corp 2000 1 1 e Blank CD RW disc e Blank CD R disc e Adaptec Easy CD Creator DirectCD disc e Option Diskette e Laser Safety Guide for CD ROMs e Electrical safety booklet Contact your place of purchase if an item is missing or damaged Be sure to retain your proof of purchase It might be required to receive warranty service See Appendix D Help and service information on page 2 20 for technical support information Software description The Ad
69. op video CD players and most DVD systems 13 The CD RW drive does not have the necessary audio circuitry and decoding functions for CD I playback but it can read from and write to CDs in this format 2 4 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit Appendix B Problem solving Computer problems can be caused by hardware software or user error You might be able to use the information in this section to solve problems yourself or gather helpful information you can pass on to a service technician You might also need to refer to your computer operating system or sound adapter documentation You can also use the problem solving diagnostic program for DOS on the JBM Option Diskette For more information on the diagnostic program see Diagnostics on page 2 12 Review the following list for any problem descriptions that might fit your situation Troubleshooting Your computer or CD RW drive does not operate correctly or the busy indicator light does not come on Take the following actions 1 Check that the CD is loaded with the label side up 2 Check that all devices are properly connected to the computer and the electrical outlet 3 Turn off the computer unplug the cables from the electrical outlets for your computer and all attached devices and remove the computer cover 4 Check that all power and IDE cables are securely attached Disconnect the IDE cable and check for bent or misaligned pins If you do not
70. owing replaces items 1 and 2 of this Section 1 liability for bodily injury including death or damage to real property and tangible personal property will be limited to that caused by IBM s negligence 2 as to any other actual damage arising in any situation involving nonperformance by IBM pursuant to or in any way related to the subject of this Statement of Warranty IBM s liability will be limited to the charge paid by you for the individual Machine that is the subject of the claim NEW ZEALAND The IBM Warranty for Machines The following paragraph is added to this Section The warranties specified in this Section are in addition to any rights you may have under the Consumer Guarantees Act 1993 or other legislation which cannot be excluded or limited The Consumer Guarantees Act 1993 will not apply in respect of any goods which IBM provides if you require the goods for the purposes of a business as defined in that Act Limitation of Liability The following is added to this Section Where Machines are not acquired for the purposes of a business as defined in the Consumer Guarantees Act 1993 the limitations in this Section are subject to the limitations in that Act EUROPE MIDDLE EAST AFRICA EMEA The following terms apply to all EMEA countries The terms of this Statement of Warranty apply to Machines purchased from an IBM reseller If you purchased this Machine from IBM the terms and conditions of the applicable IBM agreement
71. pens follow the onscreen instructions If not continue to the next step Click Start gt Settings gt Control Panel Double click Add Remove Programs 5 Follow the on screen instructions to complete the installation Repeat as necessary to install each of the Easy CD Creator DirectCD and UDF Reader components 6 Restart your operating system quss Using CD R and CD RW discs The CD RW drive can write to both CD R and CD RW discs CD R discs cannot be erased but can be used with standard CD ROM drives and CD players You can use CD R discs to record audio tracks store data archive files and copy files from another CD CD RW discs can be erased and rewritten but can be used only with newer MR multi read and CD RW compatible CD ROM and DVD ROM drives You can use CD RW discs to back up store and update files or to copy files from another CD Note CD R discs are playable on audio CD players CD RW discs are not playable on most audio CD players 1 24 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit Using the drive This section will give you information on how to handle and care for CDs and your CD RW drive how to load CDs into your CD RW drive and how to get started using the Easy CD Creator and DirectCD programs Handling and caring for a CD CDs are high density media that must be handled with care and kept clean to insure that they remain readable These precautions will help to prolong the
72. percent of the charges if recurring the 12 months charges apply for the Machine that is the subject of the claim or which otherwise gives rise to the claim Applicability of suppliers and resellers unchanged The following paragraph is added at the end of this Section IBM s entire liability and your sole remedy whether in contract or in tort in respect of any default shall be limited to damages ITALY Limitation of Liability The following replaces the second sentence in the first paragraph In each such instance unless otherwise provided by mandatory law IBM is liable for no more than item 1 unchanged 2 as to any other actual damage arising in all situations involving non performance by IBM pursuant to or in any way related to the subject matter of this Statement of Warranty IBM s liability will be limited to the total amount you paid for the Machine that is the subject of the claim Applicability of suppliers and resellers unchanged The following replaces the second paragraph of this Section Unless otherwise provided by mandatory law IBM and your reseller are not liable for any of the following items 1 and 2 unchanged 3 indirect damages even if IBM or your reseller is informed of their possibility SOUTH AFRICA NAMIBIA BOTSWANA LESOTHO AND SWAZILAND Limitation of Liability The following is added to this Section IBM s entire liability to you for actual damages arising in all situations involving nonperforman
73. port Web Site http www ibm com pc support IBM Automated Fax System 1 800 426 3395 in U S and Canada During the warranty period assistance for replacement or exchange of defective components is available In addition if your IBM option is installed in an IBM computer you might be entitled to service at your location Your technical support representative can help you determine the best alternative Telephone technical support Marketing installation and configuration support through the HelpCenter will be withdrawn or made available for a fee at IBM s discretion 90 days after the option has been withdrawn from marketing Additional support offerings including step by step installation assistance are available for a nominal fee To assist the technical support representative have available as much of the following information as possible Option name Option number Proof of purchase Computer manufacturer model serial number if IBM and manual Exact wording of the error message if any Description of the problem Hardware and software configuration information for your system SINON m UE If possible be at your computer Your technical support representative might want to walk you through the problem during the call 2 20 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit For the support telephone number and support hours by country refer to the following table or to the enclosed technical suppo
74. r 4 Save the CONFIG SYS file and exit from the editor Using a text editor create a minimum AUTOEXEC BAT system file on the System Diskette to support only a CD RW drive The following procedure uses the E text editor to create the AUTOEXEC BAT file from the A prompt 1 Type e autoexec bat and press Enter 2 Type Wnscdex d ibmcd100 m 10 and press Enter 3 Save the AUTOEXEC BAT file and exit the editor 3 Turn off the computer and check that the System Diskette is in the diskette drive 4 Restart the computer the computer will start up from the System Diskette Part 2 Appendixes 2 9 10 11 12 13 14 Observe the startup messages and check that the device driver IBMIDECD SYS loads When MSCDEX loads observe the drive letter that the computer assigns to the CD RW drive Load a data CD into the CD tray then wait until the busy indicator is not lit Attempt to read from the CD by typing dir x where x is the CD RW drive letter assigned after the MSCDEX message e the computer is able to read the CD a conflict probably exists between the device drivers loaded in the CONFIG SYS or AUTOEXEC BAT files You need to resolve this device conflict You might have to set some configuration parameters for your installation refer to Appendix C Customizing device driver configuration settings on page 2 13 for more information e If you are unable to access the CD you might have a hardware problem If yo
75. r operating system e DOS UMB DOS HIGH UMB CONFIG SYS entry This command enables the use of upper memory and loads DOS MSCDEX and the IDE CD ROM device driver in upper memory e HIMEM SYS CONFIG SYS entry This is a device driver that manages extended memory RAM memory above 1 MB Windows automatically loads this device driver e EMMG86 EXE CONFIG SYS entry This is a device driver that allows the extended memory made available by HIMEM SYS to be used as expanded memory The MSCDEX E parameter might be used in conjunction with this device driver to move the cache allocated by MSCDEX into this memory thus freeing some conventional memory use from DOS prompt This is a useful DOS utility that will display the current memory allocation in your computer to help you understand where device drivers and programs are located To display the MEM parameters available at the DOS prompt type mem Enhancing performance in DOS and Windows The following two procedures can enhance CD ROM drive performance 1 Allocate more MSCDEX cache see M parameter for MSCDEX 2 Allow SMARTDRV to cache CD ROM accesses The CDSETUP program disables the cache CD ROM data function Multisession CDs are not compatible with the SMARTDRV caching method If you do not plan to use PhotoCD or multiple session CDs you can enable caching by removing the U parameter from the SMARTDRV line in your AUTOEXEC BAT or CONFIG SYS file Thi
76. ration settings problem solving help and service information warranty and notices Note The illustrations in this manual might be slightly different from your hardware vi IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit Part 1 Installation and usage guide This part of the manual consists of an introduction installation instructions and instructions for using and maintaining the CD RW drive Introduction This section will give you a description of this option and the software which comes with it as well as some information you will need before you install the option Product description The IBM can write and read CD RW CD ReWritable and CD R CD Recordable discs and can read mass produced stamped CDs As a result CDs created by this drive are compatible with MR Multi Read CD ROM and DVD ROM drives that can read CD RW discs and other media types and with older non MR CD ROM drives that can read only CD R and CD ROM discs The drive writes to CD RW and CD R discs at different speeds The drive can write to a CD RW disc at up to four times the standard CD ROM speed recording data at up to 1200 KB per second At this rate the drive can record approximately 650 MB of information on a CD RW disc in about 18 minutes The drive can write to a CD R disc at up to eight times the standard CD ROM speed recording data at up to 2400 KB per second At this rate the drive can record approximately 650 MB of information
77. riod transportation for delivery of the failing Machine to IBM will be at IBM s expense Production Status The following paragraph replaces this Section Each Machine is newly manufactured It may incorporate in addition to new parts re used parts as well Limitation of Liability The following is added to this Section The limitations and exclusions specified in the Statement of Warranty will not apply to damages caused by IBM with fraud or gross negligence and for express warranty In item 2 replace U S 100 000 with 1 000 000 DEM The following sentence is added to the end of the first paragraph of item 2 IBM s liability under this item is limited to the violation of essential contractual terms in cases of ordinary negligence IRELAND Extent of Warranty The following is added to this Section Except as expressly provided in these terms and conditions all statutory conditions including all warranties implied but without prejudice to the generality of the foregoing all warranties implied by the Sale of Goods Act 1893 or the Sale of Goods and Supply of Services Act 1980 are hereby excluded Limitation of Liability The following replaces items one and two of the first paragraph of this Section Part 2 Appendixes 2 29 1 death or personal injury or physical damage to your real property solely caused by IBM s negligence and 2 the amount of any other actual direct damages up to the greater of Irish Pounds 75 000 or 125
78. rive writes to CD RW and CD R discs at different speeds The drive can write to a CD RW disc at up to four times the standard CD ROM speed recording data at up to 1200 KB per second At this rate the drive can record approximately 650 MB of information on a CD RW disc in about 18 minutes The drive can write to a CD R disc at up to eight times the standard CD ROM speed recording data at up to 2400 KB per second At this rate the drive can record approximately 650 MB of information on a CD R disc in about nine minutes The drive can also read data at up to 32 times the standard CD ROM speed or 9600 KB per second Note To use the drive s CD recording function you must install the Easy CD Creator DirectCD software included for Microsoft Windows 98 Windows 95 or Windows NT 4 0 For more information on the Easy CD Creator DirectCD software see Software description on page 1 2 The IBM can be installed only in a computer that uses the integrated drive electronics IDE or the enhanced IDE architecture In addition to this book the option kit includes e CD RW drive e Two audio cables e Four mounting screws x 5 mm slotted e IDE cable e Two faceplates for use with certain systems a KB equals approximately 1024 bytes when referring to data transfer speeds E MB equals approximately 1000000 bytes when referring to storage capacity 8 If you purchased the black option kit you will receive one black faceplate
79. rivers Windows 98 and Windows 95 have two device driver configuration parameters Auto Insert Notify and DMA The Auto Insert Notify parameter enables the computer to start audio CD software as soon as a CD is inserted into the CD RW drive The DMA parameter improves computer performance by having the computer DMA controller handle moving data from the CD to memory freeing the computer microprocessor to perform more important tasks For example activating DMA might make movies and games run more smoothly because the microprocessor will be allocating more processing time to video Changing the Auto Insert Notify and DMA parameters To change these parameter settings from the Windows 98 or Windows 95 desktop Click Start gt Settings gt Control Panel Double click System Select Device Manager Double click CD ROM Click Properties Select Settings Click Auto Insert Notification or DMA Click OK CO O ue Gn Part 2 Appendixes 2 19 Appendix D Help and service information See Appendix B Problem solving on page 2 5 before requesting help or service This section contains information on how to obtain online and telephone technical support Online technical support Online technical support is available during the life of your product Online assistance can be obtained through the Personal Computing Support Web site or the IBM Automated Fax System Online technical support IBM Personal Computing Sup
80. rom the scrolldown box Note This is the drive containing the CD you want to copy 5 In the Record To section select the CD RW drive from the scrolldown box Be sure that there is a blank CD R or CD RW disc in the CD RW drive 6 On the Advanced tab you can choose to test the CD for the best possible recording speed You can also change the number of copies made or choose to have the CD copied to your hard disk before copying it to the blank CD These selections will increase the time it takes to copy the CD 7 When you are finished choosing the settings place the CD you are going to copy into the source drive 8 Click Copy to start copying your CD Part 1 Installation and usage guide 1 15 Installation and usage guide Translate This part of the manual consists of an introduction installation instructions and instructions for using and maintaining the CD RW drive Introduction This section will give you a description of this option and the software which comes with it as well as some information you will need before you install the option Product description The IBM can write and read CD RW CD ReWritable and CD R CD Recordable discs and can read mass produced stamped CDs As a result CDs created by this drive are compatible with MR Multi Read CD ROM and DVD ROM drives that can read CD RW discs and other media types and with older non MR CD ROM drives that can read only CD R and CD ROM discs The d
81. rt insert If the number is not provided contact your IBM reseller or IBM marketing representative Response time may vary depending on the number and nature of the calls received Support 24 hours a day 7 days a week Canada 1 800 565 3344 U S A Puerto Rico 1 800 772 2227 Part 2 Appendixes 2 21 Appendix E Product warranty and notices This section includes product warranty information and legal notices Warranty statements The warranty statements consist of two parts Part 1 and Part 2 Part 1 varies by country Part 2 is the same for both statements Be sure to read both the Part 1 that applies to your country and Part 2 e United States Puerto Rico and Canada Z125 4753 05 11 97 Part 1 General Terms on page 2 22 e Worldwide except Canada Puerto Rico Turkey and United States Z125 5697 01 11 97 Part 1 General Terms on page 2 25 Worldwide Country Unique Terms Part 2 Country Unique Terms on page 2 27 IBM Statement of Limited Warranty for United States Puerto Rico and Canada Part 1 General Terms This Statement of Limited Warranty includes Part 1 General Terms and Part 2 Country unique Terms The terms of Part 2 may replace or modify those of Part 1 The warranties provided by IBM in this Statement of Limited Warranty apply only to Machines you purchase for your use and not for resale from IBM or your reseller The term Machine means an IBM machine its features conv
82. s might improve the performance of some CD ROM applications You must have SMARTDRV 5 0 or later to cache CD ROM data Part 2 Appendixes 2 17 Updating the device driver for a DOS network server If you are using the CD RW drive in a DOS Network server you need to make the following changes 1 Add the S parameter to the MSCDEX line in the AUTOEXEC BAT file 2 Verify that the MSCDEX line is located after the line that loads the network services NET START for IBM PC LAN program 3 Do one of the following depending on your operating system e If you are using DOS 3 3 be sure you have PC Local Area Network LAN Program Corrective Service Diskette level IP00755 or later installed e f you are using DOS 4 0 be sure you have DOS Corrective Service Diskette level UR 29015 or later installed The computer cannot be configured as an Extended Services Domain Controller for the IBM PC LAN Program Contact your IBM reseller for more information about the PC LAN Program Corrective Service Diskette or the DOS Corrective Service Diskette Changing the device driver for OS 2 You might need to customize the setup that the DDINSTAL file has installed on your computer in order to meet your requirements This section provides information and describes parameters that you might need to change or add for your installation OS 2 uses the OS2CDROM DMD device driver DEVICE 0S2CDROM DMD Options to control all CD ROM devices The followin
83. t using the information in your CD layout such as CD title artist name and song list To print a jewel case insert or CD label 1 Click Start gt Programs gt Adaptec Easy CD Creator gt Create CD 2 Click Jewel Case Creator 3 On the left click to select the front cover inside front cover back cover or CD label 4 Make any changes in the main editing window You can change the background theme by clicking the Format menu and selecting Change Themes 5 When you are finished making changes click the File menu and select Print then click OK For more information on changing the information in the Jewel Case Layout window see the Adaptec software online user s guide Backing up a CD Attention The CD Copier program copies files from one CD to another CD To copy a commercial CD you must either own the copyright or obtain permission from the copyright owner If you do not own the copyright or do not have permission to copy from the copyright owner you might be violating copyright law and might be subject to payment of damages or other remedies For more information on copyright law consult your legal advisor To back up copy a CD using your CD RW drive 1 Click Start gt Programs gt Adaptec Easy CD Creator gt Features 2 Click CD Copier The CD Copier window will open 3 Click the Source and Destination tab if it is not on top 4 In the Copy From section select the source drive f
84. tically mounted drive go to page 1 12 1 Slide the drive into the bay Your computer might have specific required procedures for installing storage devices Refer to the documentation that comes with your computer for further instructions 2 Align the drive bay screw holes with the threaded holes in the drive housing or mounting bracket then thread the screws in loosely to check their positions Usually two screws are used on each side 3 Check to make sure the alignment is correct then tighten the screws to secure the drive Do not overtighten Part 1 Installation and usage guide 1 21 Step 6 Attaching the cables to the drive Connect the cables to the CD RW drive as follows 1 If you want to connect the CD RW drive to your sound adapter or to the sound function on your system board locate the included audio cables and determine which cable best fits the CD audio in port on your sound adapter Connect one end of the selected audio cable to the CD RW drive audio out connector El and the other end of the cable to your sound adapter CD audio in port Save the other cable in case you use a different sound adapter in the future 2 Attach a 40 pin IDE cable connector to the IDE connector on the drive Align the cable so that the color coded edge is closest to the power cable connector Use the IDE cable provided with this option if there is no cable attached to the IDE port or if there is only one device connector on the IDE
85. tion jumper setting you use for the drive If you have two IDE ports connect the CD RW drive to the secondary IDE port on your system board or IDE adapter If the CD RW drive is the only device on the secondary IDE port use the master configuration setting If the CD RW drive is the second device on the secondary port use the subordinate or slave configuration setting If you must attach the CD RW drive to the primary IDE port the same port as a hard disk drive or other fast device use the subordinate setting for the CD RW drive and the master setting for the faster device In some instances you might need to change the hard disk drive configuration setting to master with subordinate present when attaching a subordinate device on the same cable For further information on setting configuration jumpers on other devices refer to the documentation that comes with your computer or with the device in question Some non IBM computers support the cable select setting where the position of the device on the cable determines whether a device is master or subordinate See the documentation that comes with your computer to determine if your computer supports this setting 1 20 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit Step 4 Setting the configuration jumper a C S oop 15772251258 88888888888888888888 c
86. tion of Liability Circumstances may arise where because of a default on IBM s part or other liability you are entitled to recover damages from IBM In each such instance regardless of the basis on which you are entitled to claim damages from IBM including fundamental breach negligence misrepresentation or other contract or tort claim IBM is liable for no more than 1 damages for bodily injury including death and damage to real property and tangible personal property and 2 the amount of any other actual direct damages up to the greater of U S 100 000 or equivalent in local currency or the charges if recurring 12 months charges apply for the Machine that is the subject of the claim This limit also applies to IBM s suppliers and your reseller It is the maximum for which IBM its suppliers and your reseller are collectively responsible UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF THE FOLLOWING 1 THIRD PARTY CLAIMS AGAINST YOU FOR DAMAGES OTHER THAN THOSE UNDER THE FIRST ITEM LISTED ABOVE 2 LOSS OF OR DAMAGE TO YOUR RECORDS OR DATA OR 3 SPECIAL INCIDENTAL OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES INCLUDING LOST PROFITS OR SAVINGS EVEN IF IBM ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU Part 2 Worldwide Cou
87. tion with the device driver IBMIDECD SYS to enable your computer to read CDs as DOS formatted disks MSCDEX is designed for DOS and Windows The CDSETUP program automatically adds an MSCDEX statement to your AUTOEXEC BAT file You can modify the default MSCDEX parameters to customize your installation This section explains the function of each parameter text editor can be used to modify the MSCDEX statement in your AUTOEXEC BAT file The following is the syntax of the MSCDEX EXE entry in AUTOEXEC BAT where drive path MSCDEX EXE specifies the location drive and directory of the MSCDEX EXE file drive path MSCDEX EXE D device name M n E V L drive letter UK S Do not truncate the actual device driver entry Place the complete entry on one line in the AUTOEXEC BAT file Use the following options to configure the device driver D device name This parameter specifies the name of the CD ROM drive eight characters maximum This name must be identical to the device name specified in the device driver in the CONFIG SYS file For example C MSCDEX EXE D IBMCD100 You might support multiple CD ROM drives of different types by installing each of their device drivers naming them different names and placing a D device name in the MSCDEX line for each drive For example if you wanted to support an IBM IDE CD ROM drive and an IBM SCSI CD ROM drive your CONFIG SYS file might have these statements DEVIC
88. tray does not open when you press the Eject Load button see Manually ejecting a CD on page 1 13 for information on manual ejection 1 26 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit To load a CD into a vertically mounted CD RW drive follow these steps 1 Press the Eject Load button 2 Look at the illustrations and compare them to your loading tray e If your loading tray looks like the left illustration insert the CD carefully so that the edges of the CD are underneath the tabs on the loading tray These plastic tabs cover the edges of the CD and hold it in place The tabs are attached to the tray itself and cannot be moved e If your loading tray looks like the right illustration insert the CD into the tray and gently push the movable tab forward to hold the CD in place 3 Close the loading tray by pressing the Eject Load button or by gently pushing the tray in Part 1 Installation and usage guide 1 27 Manually ejecting a CD If you press the Eject Load button and the tray does not slide out turn off the computer and straighten a large paper clip to form a tool as shown in the illustration The straightened end must extend at least 45 mm 1 8 in Insert the extended end into the manual eject hole on the front of the drive see Front view of the drive on page 1 4 Push the paper clip into the hole until the tray opens Gently pull out the tray until you
89. u are unable to read from the CD or a drive letter is not assigned by MSCDEX go to the next step Turn off the computer unplug the cables from the electrical outlets for your computer and all attached devices and remove the computer cover Disconnect the IDE and power cable for all IDE devices except the CD RW drive Configure the CD RW drive as a master and connect it to the last IDE connector on the primary IDE port Reinstall the computer cover Reconnect all devices then plug the power cords into electrical outlets Place the System Diskette in the diskette drive and a data CD in the CD RW drive Restart the computer Attempt to read from the CD by typing dir C The CD RW drive is drive C because it is the only device connected to the IDE port e the computer is able to read the CD a conflict probably exists with one of the devices that was installed on your computer You need to resolve this device driver conflict Check the configuration jumper settings for the other devices or refer to your device documentation e If you are unable to access the CD you might have a hardware problem If the CD RW drive still does not read from the data CD the CD RW drive might be defective Go to Appendix D Help and service information on page 2 20 The CD cannot be read Take the following actions 1 The CD might be dirty clean it as described in Handling and caring for a CD on page 1 10 2 10 IBM 4X
90. ur reseller services must be installed on a Machine which is 1 for certain Machines the designated serial numbered Machine and 2 at an engineering change level compatible with the feature conversion or upgrade Many features Part 2 Appendixes 2 23 conversions or upgrades involve the removal of parts and their return to IBM part that replaces a removed part will assume the warranty service status of the removed part Before IBM or your reseller exchanges a Machine or part you agree to remove all features parts options alterations and attachments not under warranty service You also agree to 1 ensure that the Machine is free of any legal obligations or restrictions that prevent its exchange 2 obtain authorization from the owner to have IBM or your reseller service a Machine that you do not own and 3 where applicable before service is provided a follow the problem determination problem analysis and service request procedures that IBM or your reseller provides b secure all programs data and funds contained in a Machine c provide IBM or your reseller with sufficient free and safe access to your facilities to permit them to fulfill their obligations and d inform IBM or your reseller of changes in a Machine s location IBM is responsible for loss of or damage to your Machine while it is 1 in IBM s possession or 2 in transit in those cases where IBM is responsible for the transportation charges Neither IBM
91. ve to the middle connector You cannot format a CD RW disc Take the following actions 1 Verify that your computer has the latest level IDE CD ROM device driver for your CD ROM drive Refer to the documentation for your computer or your CD ROM drive to determine which device driver file to look for 2 Verify that your system has the latest level IDE controller device driver Refer to the documentation for your computer or IDE controller to determine which device driver file to look for You cannot create a multisession disc Be sure that there is enough space left on the media for another session Writing a session requires lead in and lead out space about 15 MB in addition to the data that is recorded You cannot successfully write to a CD R or CD RW disc Take the following actions 1 Verify that the process is not being interrupted by a screen saver an antivirus program an Internet or e mail program or other software Disable the functions that might interrupt the write operation 2 Verify that your computer has the minimum processor listed in the system requirements for this option 3 Verify that the hard disk drive has been defragmented 4 Replace the disc if it is damaged or scratched 5 Disable the Windows Auto Insert Notify function on your CD ROM and CD RW drives You cannot eject a CD Take the following actions after ensuring that the drive is not in the process of writing to a disc 1 Ej
92. warranty service You also agree to 1 ensure that the Machine is free of any legal obligations or restrictions that prevent its exchange 2 obtain authorization from the owner to have IBM or your reseller service a Machine that you do not own and 3 where applicable before service is provided a follow the problem determination problem analysis and service request procedures that IBM or your reseller provides b secure all programs data and funds contained in a Machine c provide IBM or your reseller with sufficient free and safe access to your facilities to permit them to fulfil their obligations and d inform IBM or your reseller of changes in a Machine s location 2 26 IBM 4X 8X 32X CD ReWritable Internal IDE Option Kit IBM is responsible for loss of or damage to your Machine while it is 1 in IBM s possession or 2 in transit in those cases where IBM is responsible for the transportation charges Neither IBM nor your reseller is responsible for any of your confidential proprietary or personal information contained in a Machine which you return to IBM or your reseller for any reason You should remove all such information from the Machine prior to its return Production Status Each IBM Machine is manufactured from new parts or new and used parts In some cases the Machine may not be new and may have been previously installed Regardless of the Machine s production status IBM s appropriate warranty terms apply Limita

IBM 09N4076 Computer Drive User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents