Husqvarna 536 LIL Trimmer User Manual
Contents
1. WARNING The machine can cause serious personal injury Read the safety instructions carefully Learn how to use the machine WARNING Always remove the battery before any maintenance on the machine Basic safety rules Wear personal protective equipment See instructions u 1 nder the Personal protective equipment heading Look around you To ensure that people animals or other things cannot affect your control of the machine To ensure that people animals etc do not come into contact with the cutting attachment or loose objects that are thrown out by the cutting attachment CAUTION Do not use the machine unless you are able to call for help in the event of an accident Ensure that no one comes closer than 15 metres while you are working Inspect the working area Remove all loose objects such as stones broken glass nails steel wire string etc that could be thrown out or become wrapped around the cutting attachment Never use the machine in bad weather for instance in fog in rain damp or in wet locations strong winds intense cold risk of lightning etc Working in bad weather is tiring and can lead to dangerous conditions e g slippery surfaces 18 English Safety instructions while working Make sure you can move and stand safely Check the area around you for possible obstacles roots rocks branches ditches etc in case you have to move suddenly Take gr2. English 3 CONTENTS Contents Note the following before KEY TO SYMBOLS starting Symbols on the machine sceecceeeeeeeeeeseees 2 Please read the operator s manual carefully Symbols on the battery and or on the battery charger ape eid dd 2 WARNING Long term exposure to noise Symbols in the operator s manual so cscccessnaceeenenaed 3 can result in permanent hearing CONTENTS impairment Always use hearing COUSINS vat ae SA ODD ee NAA 4 protection Note the following before starting 4 INTRODUCTION WARNING Under no circumstances may Dear 8 13101405 MAMMA 5 the design of ll lell skeleti a without the permission of the WHAT IS WHAT manufacturer Always use original What is 407 E 6 accessories Non authorized GENERAL SAFETY PRECAUTIONS modifications and or accessories can result in serious personal injury or the General power tool safety warnings 7 death of the operator or others Personal protective equipment 8 Battery and battery Charger ssseeeeeeeeeees 8 Mie E E T T 10 WARNING A lawn trimmer can be i y equipment eitama nendeta dangerous if used incorrectly or Cutting eq lpmMmen t eraai i aka 11 carelessly and can cause serious or fatal ASSEMBLY injury to the operator or others It is Fitting the loop handle itsvss timvva v titpdgnmmmpakktm kka 13 extremely important that you read and a understand the con
3. The machine is eguipped with a shutdown feature that deactivates the machine if not used The green LED and the machine will switch off after 1 minute Grass trimming with a trimmer head WARNING Sometimes branches or grass get caught between the guard and e cutting attachment Always remove the battery before cleaning Trimming e Hold the trimmer head just above the ground at an angle It is the end of the line that does the work Let the line work at its own pace Never press the line into the area to be cut hy RM AWAY a e The line can easily remove grass and weeds up against walls fences trees and borders However it can also damage sensitive bark on trees and bushes and damage fence posts e Reduce the risk of damaging plants by shortening the line to 10 12 cm and reducing the engine speed English 19 WORKING TECHNIQUES Clearing e The clearing technique removes all unwanted vegetation Keep the trimmer head just above the ground and tilt it Let the end of the line strike the ground around trees posts statues and the like CAUTION This technique increases the wear on the line m WALA e The line wears quicker and must be fed forward more often when working against stones brick concrete metal fences etc than when coming into contact with trees and wooden fences i e When trimming and clearing you should use less than full throttle so that the cord lasts longer and
4. battery LED 1 LED 2 are lit LED The battery is 50 75 temperature is over 50 C In that case the battery 3 flashes charged charger will actively cool down the battery LED 1 LED 2 LED 3 are Battery is 75 100 Connect the battery to the battery charger LED 4 flashes charged Regularly check that the battery charger and the battery LED 1 LED 2 LED 3 GAG E erat are intact See also instructions under the Maintenance LED 4 are lit One Dater eau heading UA 86 English 15 BATTERY HANDLING Transport and storage e Secure the machine during transport e Always remove the battery for storage or transport e Store the battery and the battery charger in a dry moisture free and frost free space To prevent accidents ensure that your battery is not connected to the machine when stored e Do not store the battery in places where static electricity can occur Never store the battery in a metal box e Store the battery and the battery charger where the temperature is between 5 C and 45 C and never in direct sunlight e Store the battery charger only in an enclosed and dry space e Be sure to store the battery separate from the battery charger Store the equipment in a lockable area so that it is out of reach of children and unauthorized persons e Ensure the machine is cleaned and that a complete service is carried out before long term storage Disposal of the battery battery charger and ma
5. in EU countries GLOVES Gloves should be worn when necessary e g when fitting cutting attachments BOOTS Wear sturdy non slip boots CLOTHING Wear clothes made of a strong fabric and avoid loose clothing that can catch on twigs and branches Always wear heavy long pants Do not wear jewellery shorts sandals or go barefoot Secure hair so it is above shoulder level FIRST AID KIT Always have a first aid kit nearby It Battery and battery charger This section describes the battery and battery charger safety for your battery product Only use Husqvarna original batteries for Husqvarna products and only charge them in an original battery charger from Husqvarna The batteries are software encrypted GENERAL SAFETY PRECAUTIONS Battery charger safety Battery safety The rechargeable Husqvarna batteries BLi are exclusively used as a power supply for the relevant Husqvarna cordless appliances To avoid injury the battery must not be used as a power source for other devices Only use Chargers Husqvarna QC for charging the Husqvarna replacement batteries BLi WARNING Protect the battery from direct sunlight heat or open flame There is a risk the battery may explode if it is thrown into an open fire There is a risk of burns and or chemical burns WARNING Avoid all skin contact with battery acid Battery acid may cause skin irritation burns or corrosive injuries If you get acid in you
6. Operator s manual 536 LIL 536 LIR Please read the operator s manual carefully and make sure you understand the instructions before using the machine ag IER KEY TO SYMBOLS Symbols on the machine Translation of the original Swedish operating instruction WARNING Trimmers can be dangerous Careless or incorrect use can result in serious or fatal injury to the operator or others It is extremely important that you read and understand the contents of the operator s manual Please read the operator s manual carefully and make sure you understand the instructions before using the machine Always wear e Approved hearing protection e Approved eye protection Max speed of output shaft rom max 6000 rpm This product is in accordance with applicable EC directives The operator of the machine must ensure while working that no persons or animals come closer than 15 metres Always wear approved protective gloves Wear sturdy non slip boots Symbols on the product or its packaging indicate that this product cannot be handled as domestic waste This product must be deposited at an appropriate recycling facility Watch out for thrown objects and ricochets Only use non metallic flexible cutting attachments i e trimmer heads with trimmer line 2 English Arrows which show limits for handle positioning Do not expose to rain KO Direct current Control panel e Rotation d
7. achine being started by accident Always remove the battery before any maintenance on the machine Before using the machine and after any impact check for signs of wear or damage and repair as necessary Inspect the working area Remove all loose objects such as stones broken glass nails steel wire string etc that could be thrown out or become wrapped around the cutter or cutter guard The machine operator must ensure that no people or animals come closer than 15 metres while working When several operators are working in the same area the safety distance should be at least 15 metres Carry out an overall inspection of the machine before use See the maintenance schedule Personal safety The cutting tool does not stop immediately after the machine is turned off The machine is only design for trimming Never fit metal cutting elements Do not use the lawn trimmer for any job except that for which it is intended Stay alert watch what you are doing and use common sense when operating a power tool Do not use a power tool while you are tired or under the influence of drugs alcohol or medication A moment of inattention while operating power tools may result in serious personal injury This appliance is not intended for use by person including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of th
8. chine Symbols on the product or its packaging indicate that this product cannot be handled as domestic waste It must instead be submitted to an appropriate recycling station for the recovery of electrical and electronic equipment By ensuring that this product is taken care of correctly you can help to counteract the potential negative impact on the environment and people that can otherwise result through the incorrect waste management of this product For more detailed information about recycling this product contact your municipality your domestic waste service or the shop from where you purchased the product eo Li ion Sai 16 English STARTING AND STOPPING Check before starting pe e Check the motor for dirt and cracks Clean off grass and leaves from the engine using a brush Gloves should be worn when necessary e Check that the trimmer head is completely attached to the trimmer e Check that the machine is in perfect working order Check that all nuts and screws are tight e Check that the trimmer head and trimmer guard are not damaged or cracked Replace the trimmer head or trimmer guard if they have been exposed to impact or are cracked DB e Never use the machine without a guard nor with a defective guard e All covers must be correctly fitted and undamaged before you start the machine e Only use the machine for the purpose it was intended for Connect battery to the machine Ma
9. data chapter The following standards have been applied EN 60335 1 IEC 60335 2 91 EN 62133 EN 60335 2 29 EN ISO 11806 Huskvarna 7 may 2012 fy bo Bengt Fr gelius Development manager Authorized representative for Husqvarna AB and responsible for technical documentation English 25 AD Eel 8 1154529 26
10. e appliance by a person responsible for their safety Children should be supervised to ensure that they do not play with the appliance Never allow children or other persons not trained in the use of the machine and or the battery to use or service it Local laws may regulate the age of the user e Store the equipment in a lockable area so that it is out of reach of children and unauthorized persons e Keep hands and feet away from the cutting area at all times and especially when switching on the motor e Dress properly Do not wear loose clothing or jewellery Keep your hair clothing and gloves away from moving parts Loose clothes jewellery or long hair can be caught in moving parts e Never use the machine if you are tired if you have drunk alcohol or if you are taking medication that could affect your vision your judgement or your co ordination e Wear personal protective equipment See instructions under the Personal protective equipment heading Turn off the machine when it has to be moved Always remove the battery when passing the machine to another person Power tool use and care e The only accessories you can operate with this product are the cutting attachment we recommend in the technical data chapter e Never use a machine that has been modified in any way from its original specification Never use the machine near explosive or flammable materials e Never use a machine that is faulty Carry ou
11. eat care when working on sloping ground Do not overreach Keep proper footing and balance at all times Always hold the machine with both hands Hold the machine on the right side of your body Keep all parts of your body away from the rotating cutting attachment Keep the cutting attachment below waist level Turn off the machine when it has to be moved Always remove the battery when passing the machine to another person Never put the machine down without turning it off first and always remove the battery If any foreign object is hit or if vibrations occur stop the machine immediately Remove the battery from the machine and check that the machine is not damaged If any unwanted vibrations occur tap out new line to give the line the correct length and the vibrations should stop Release the power trigger after each working operation to save battery power WORKING TECHNIQUES WARNING Neither the operator of the machine nor anyone else may attempt to remove the cut material while the motor is running or the cutting attachment is rotating as this can result in serious injury Turn off the machine and remove the battery before removing materials that are wound around the trimmer head as otherwise there is risk of injury The bevel gear can get hot during use and may remain so for a while afterwards You could get burnt if you touch it WARNING Watch out for thrown objects Always wear approved eye protecti
12. er to create the water powered plant During the more than 300 years in existence the Husqvarna factory has produced a lot of different products from wood stoves to modern kitchen appliances sewing machines bicycles motorcycles etc In 1956 the first motor driven lawn mowers appeared followed by chain saws in 1959 and it is within this area Husqvarna is working today Today Husqvarna is one of the leading manufacturers in the world of forest and garden products with quality as our highest priority The business concept is to develop manufacture and market motor driven products for forestry and gardening as well as for the building and construction industry Husqvarna s aim is also to be at the front edge for ergonomics usability security and environmental protection That is the reason why we have developed many different features to add to our products within these areas We are convinced that you will appreciate with great satisfaction the quality and performance of our product for a very long time to come The purchase of one of our products gives you access to professional help with repairs and service whenever this may be necessary If the retailer who sells your machine is not one of our authorised dealers ask for the address of your nearest service workshop It is our wish that you will be satisfied with your product and that it will be your companion for a long time Think of this operator s manual as a valuable document By fol
13. est service agent Only use original spare parts Regularly check that the battery charger and the battery are intact Cleaning Clean the machine after use If the battery connector on the machine is dirty clean it by blowing them with compressed air or use a soft brush Make sure the battery and battery charger are clean and that the terminals on the battery and the battery charger are always clean and dry before the battery is placed in the battery charger Keep the battery guide tracks clean Clean plastic parts with a clean and dry cloth Trimmer line Check the line by threading it into the hole on the cover as shown in the illustration Only use the recommended trimmer heads and trimmer lines These have been tested by the manufacturer to suit a particular motor size This is especially important when a fully automatic trimmer head is used Only use the recommended cutting attachment See the chapter on Technical data Trimmer head Check that the trimmer head is undamaged and not cracked Replace the trimmer head if necessary e Press the snap in clips on the trimmer head and remove the trimmer head and line e Remove the nut holding the trimmer head and the drive disc e Replace the trimmer head e Install the drive disc and the trimmer head Fit the nut and the line chute assembly Fit the trimmer head English 21 MAINTENANCE Troubleshooting schedule Troubleshooting ta
14. ger and the machine is active If the warning symbol 8 flashes it indicates that the machine is too hot and the machine deactivates When the machine is restored to normal temperature it is again ready to run and you can activate the machine Solid red warning light 3 indicates service Power trigger lockout The power trigger lockout is designed to prevent accidental operation of the power trigger When you press the lock 1 i e when you grasp the handle it releases the power trigger 2 When you release the handle the power trigger and the power trigger lockout both move back to their original positions This movement is controlled by two independent return springs GENERAL SAFETY PRECAUTIONS Make sure the power trigger is locked when the power trigger lock is in its original position Press the power trigger and make sure it returns to its Original position when you release it Check that the power trigger and the power trigger lockout move freely and that the return spring works properly See instructions under the Start heading Start the machine and apply full power Release the power trigger and check that the cutting attachment stops and remain at a standstill Cutting attachment guard This guard is intended to prevent loose objects from being thrown towards the operator The guard also protects the operator from accidental contact with the cutting attachment Check that the guard is u
15. he battery before any maintenance on the machine The following is a list of the maintenance steps that must be performed on the machine Most of the items are described in the Maintenance section The user must only carry out the maintenance and service work described in this Operator s Manual More extensive work must be carried out by an authorized service workshop Mai Daily Weekly Monthly aintenance i maintenance maintenance maintenance Clean the outside of the machine with a clean and dry cloth Never use water Keep handles dry clean and free from oil and grease jj Make sure that the activate and deactivate button works correctly and is not damaged Check that all controls are undamaged and in working order Make sure that the power trigger lock and the power trigger X function works correctly from a safety point of view Check that the guard is undamaged and not cracked Replace X the guard if it has been exposed to impact or is cracked Check that the trimmer head is undamaged and not cracked Replace the trimmer head if necessary Check that nuts and screws are tight NE fp Check the Check the battery s charge 09090900 s charge aaa a that the release buttons on the battery works and locks POP battery into the machine Check that the battery ld ae is intact and functional SAAKA KE IK K E betel SSD that all couplings connections and cables are intact and free from dirt Check the connectio
16. hes fire or in any other emergency situation that requires you to free yourself from the machine and harness Spreading the load on your shoulders A well adjusted harness and machine makes work much easier Adjust the harness for the best working position Tension the side straps so that the weight is evenly distributed across both shoulders The handlebar can easily be turned to fit along the shaft for easier transportation and storage e Loosen the knob Turn the handle clockwise so that the throttle handle touches the battery e Now twist the handlebar around the shaft Tighten the knob Correct height The machine should be supported in a harness when trimming so that the cutting equipment is parallel to the ground 14 English BATTERY HANDLING Battery The battery must be charged before using it the first time The battery is only 30 charged when delivered The display shows the battery capacity and if there are any problems with the battery The battery capacity is displayed for 5 seconds after the machine is switched off or the battery indicator button is pressed The warning symbol on the battery is lit when an error has occurred See fault codes e Put the battery in the battery charger Make sure that the battery is connected to the battery charger e The green charging light is lit when the battery is connected to the battery charger LED lights Battery When all LEDs are lit
17. hildren to use or be in the vicinity of the machine Since the machine is easy to start children may be able to start it if they are not kept under full surveillance This can mean a risk of serious personal injury Therefore disconnect the battery when the machine is not under close supervision Personal protective equipment IMPORTANT A lawn trimmer can be dangerous if used incorrectly or carelessly and can cause serious or fatal injury to the operator or others It is extremely important that you read and understand the content of this operator s manual You must use approved personal protective equipment whenever you use the machine Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen Ask your dealer for help in choosing the right equipment WARNING Listen out for warning signals or shouts when you are wearing hearing protection Always remove your hearing protection as soon as the motor stops WARNING There is a risk of burns as the gear housing can become very hot Use gloves when working with the trimmer head HEARING PROTECTION Wear hearing protection that provides adequate noise reduction 8 English EYE PROTECTION Always wear approved eye protection If you use a visor then you must also wear approved protective goggles Approved protective goggles must comply with the ANSI Z87 1 standard in the USA or EN 166
18. ibration level has a typical statistical dispersion standard deviation of 2 m s Approved accessories Cutting attachment guard Art no 24 English TECHNICAL DATA EC declaration of conformity Applies to Europe only We Husqvarna AB SE 561 82 Huskvarna Sweden tel 46 36 146500 declare that the battery lawn trimmers Husqvarna 536 LiL 536 LiR with serial numbers dating from 2012 onwards the year is clearly stated on the rating plate followed by the serial number comply with the requirements of the COUNCILS DIRECTIVE of May 17 2006 relating to machinery 2006 42 EC of December 15 2004 relating to electromagnetic compatibility 2004 108 EC of May 8 2000 relating to the noise emissions in the environment 2000 14 EC of December 12 2006 gt relating to electrical equipment designed for use within certain voltage limits 2006 95 EC of September 6 2006 on batteries and accumulators and waste batteries and accumulators 2006 66 EC Notified body 0404 SMP Svensk Maskinprovning AB Fyrisborgsgatan 3 SE 754 50 Uppsala Sweden has performed conformity assessment according to Annex VI of Directive 2000 14 EC and issued a certificate with the number 01 1610 002 VDE Pr f und Zertifizerungsinstitut GmbH Meriansstrasse 28 DE 63069 Offenbach Am Main Germany has performed voluntary type examination on behalf of Husqvarna AB For information relating to noise emissions see the Technical
19. irection e Activate and deactivate button e SavE mode The machine is equipped with a battery saving function SavE e Warning indicator Noise emission to the environment according to the European Community s Directive The machine s emission is specified in the Technical data chapter and on the label Lwa dB Symbols on the battery and or on the battery charger This product must be deposited at an QY appropriate recycling Karey facility A Li ion Fail safe transformer Use and store battery charger only indoors gt Double insulation E Other symbols decals on the machine refer to special certification reguirements for certain markets KEY TO SYMBOLS Symbols in the operator s You will find the following labels on your lawn trimmer battery and battery charger manual The machine is turned on and off by pressing the on and stop button Always remove the battery to prevent the machine being started by accident Regular cleaning is required Visual check Remove the battery IMPORTANT Always remove the battery to prevent the machine being started by accident Husqvarna Husqvarna Li s n XXXX XXXXXXX oy Husqvarna AB Huskvarna SWEDEN Husqvarna AB 3 561 82 Husqvama Sweden Type BLi Art no 36V Ah Lilon Wh 10IME 19 65 53 SI Husgvarna AB 5 561 82 Huskvama Sweden C Typ AC eae W max SEC 36V i 47 11 AIADIE
20. ke sure to use fully charged batteries Use only a Husqvarna original battery in your machine See technical data e Insert the battery in the machine The battery should slide easily into the battery holder on the machine If the battery does not slide in easily it is not being inserted correctly The battery will lock itself into place when you hear a click Make sure the battery is fitted correctly to the machine Starting and stopping WARNING Make sure no unauthorised persons are in the working area Otherwise there is a risk of serious personal injury The safety distance is 15 metres Starting Turn on the machine Press and hold the start button gt 1 sec until the green LED is lit ki Use the power trigger to control the speed Stopping Stop the machine by releasing the power trigger or the power trigger lockout and deactivate the machine Remove the battery from the machine by pressing the two release buttons and pulling out the battery IMPORTANT Always remove the battery to prevent the machine being started by accident English 17 WORKING TECHNIQUES General working instructions IMPORTANT This section takes up the basic safety precautions for working with a lawn trimmer If you encounter a situation where you are uncertain how to proceed you should ask an expert Contact you dealer or your service workshop Avoid all usage which you consider to be beyond your capability
21. kes place from the keypad Keypad Control panel Possible faults Green activate LED flashing Low battery voltage Charging the battery The power trigger and the activate button are pressed at the same time Release the power trigger and the machine is active The trimmerhead is jammed Error LED flashes Overload Remove the battery from the machine Release the trimmer head from grass Temperature deviation Allow the machine to cool down The machine will not run Dirt in battery connectors aes VAHED PISS aroha Sot Error LED is lit with red light Contact your service agent Troubleshooting the battery and or the battery charger during charging Battery Green activate LED flashing Low battery voltage Charge the battery The battery is discharged Charge the battery Use the battery in surroundings Temperature deviation where temperatures are between 10 C and 40 C Error LED flashing Check that the mains voltage corresponds with that stated on the Over voltage rating plate on the machine Remove the battery from the battery charger Error LED is lit Cell difference too much 1V Contact your service agent Battery charger Use the battery charger only when Error LED flashing Temperature deviation the surrounding temperature is between 5 C and 40 C Error LED is lit Be Contact your service agent 22 English MAINTENANCE Maintenance schedule WARNING Always remove t
22. lowing its content usage service maintenance etc the life soan and the second hand value of the machine can be extended If you sell this machine make sure that the operator s manual is passed on to the buyer Thank you for using a Husqvarna product Husqvarna AB has a policy of continuous product development and therefore reserves the right to modify the design and appearance of products without prior notice English 5 WHAT IS WHAT What is what 1 Trimmer head 12 Handle adjustment 2 Cutting attachment guard 13 Battery indicator button 3 Shaft 14 Battery status 4 Loop handle 15 Warning indicator ERROR LED 5 Power trigger 16 Rotation direction button 6 Keypad 17 SavE button 7 Power trigger lockout 18 Activate and deactivate button 8 Battery 19 Power on and warning indicator ERROR LED 9 Cord 20 Battery release buttons 10 Battery charger 21 Socket spanner 11 Operator s manual 6 English GENERAL SAFETY PRECAUTIONS General power tool safety warnings WARNING Read all safety warnings and all instructions Failure to follow the warnings and instructions may result in electric shock fire and or serious injury IMPORTANT Save all warnings and instructions for future reference Please read the operator s manual carefully and make sure you understand the instructions before using the machine Check before starting Always remove the battery to prevent the m
23. ndamaged and not cracked Replace the guard if it has been exposed to impact or is cracked Always use the recommended guard for the cutting attachment you are using See chapter on Technical data WARNING Never use a cutting attachment without an approved guard See the chapter on Technical data If an incorrect or faulty guard is fitted this can cause serious personal injury WARNING This machine is renowned for its low vibration load Overexposure to vibration can lead to circulatory damage or nerve damage in people who have impaired circulation Contact your doctor if you experience symptoms of overexposure to vibration These symptoms include numbness loss of feeling tingling pricking pain loss of strength changes in skin colour or condition These symptoms normally appear in the fingers hands or wrists Cutting equipment This section describes how to choose and maintain your cutting equipment in order to e Obtain maximum cutting performance e Extend the life of cutting equipment IMPORTANT Only use cutting attachments with the guards we recommend See the chapter on Technical data Refer to the instructions for the cutting attachment to check the correct way to load the line and the correct line diameter Always remove the battery before you work on any part of the cutting equipment It continues to rotate even after the throttle control has been released Check that the cutting equipment has st
24. ns between the battery and the machine and also check the connection between battery and the battery X charger English 23 TECHNICAL DATA Technical data 536 LiL 536 LiR Motor Motor type BLDC brushless 36V BLDC brushless 36V Speed of output shaft rom 5500 5500 Cutting width mm 400 400 Weight Weight without battery kg 3 3 8 Weight with battery kg 4 2 5 Battery runtime Battery runtime min free run with SavE activated 60 60 Noise emissions see note 1 Sound power level measured dB A 92 92 Sound power level guaranteed Lwa dB A 96 96 Noise levels see note 2 Equivalent sound pressure level at the operator s ear measured 81 76 according to EN ISO 60335 91 2 and ISO 22868 dB A Vibration levels see note 3 Vibration levels at handles measured according to ISO 22867 m s Equipped with trimmer head original left right 1 7 0 5 2 6 2 1 36 36 Voltage V Note 1 Noise emissions in the environment measured as sound power Lwa in conformity with EC directive 2000 14 EC The difference between guaranteed and measured sound power is that the guaranteed sound power also includes dispersion in the measurement result and the variations between different machines of the same model according to Directive 2000 14 EC Note 2 Reported data for equivalent sound pressure level for the machine has a typical statistical dispersion standard deviation of 3 dB A Note 3 Reported data for equivalent v
25. on Never lean over the cutting attachment guard Stones rubbish etc can be thrown up into the eyes causing blindness or serious injury Keep unauthorised persons at a distance Children animals onlookers and helpers should be kept outside the safety zone of 15 metres Stop the machine immediately if anyone approaches Never swing the machine around without first checking behind you to make sure no one is within the safety zone Safety instructions after completing work e Make sure the cutting attachment has stopped before cleaning carrying out repairs or an inspection Remove the battery from the machine SavE mode The machine is equipped with a battery saving function SavE Activate the function by pressing the SavE button A green LED will light to indicate that the function is on In most cases SavE mode is the most optimum when trimming and gives longest runtime Release the power trigger after each working operation to save battery power m Rotation direction It is possible to change the rotation direction of the trimmer head in any position at full speed or at stop postion When the rotation button is pressed the green diode will lit and the trimmer head rotates in counterclockwise The trimmer head always rotates clockwise by default green LED is off It is easier to tap out the trimmer line to make it longer when the trimmer head rotates clockwise Automatic switch off functionality
26. opped completely and remove the battery before you start any work on it English 11 GENERAL SAFETY PRECAUTIONS Trimmer head WARNING Always use recommended trimmer line See technical data Failure to follow this instruction may cause personal injury IMPORTANT Always ensure the trimmer line is wound tightly and evenly around the drum otherwise the machine will generate harmful vibration e Only use the recommended trimmer heads and trimmer lines These have been tested by the manufacturer to suit a particular motor size This is especially important when a fully automatic trimmer head is used Only use the recommended cutting attachment See the chapter on Technical data CGE E SY e Smaller machines generally require small trimmer heads and vice versa This is because when clearing using a line the motor must throw out the line radially from the trimmer head and overcome the resistance of the grass being cleared e The length of the line is also important A longer cord requires greater motor power than a shorter line of the same diameter e Make sure that the cutters on the trimmer guard are intact These are used to cut the line to the correct length Different line lengths can result in unnecessary vibrations Tap the trimmer head to get correct lengths on the line e Toincrease the life of the line it can be soaked in water for a couple of days This will make the line tougher so that it lasts longe
27. r 12 English ASSEMBLY Fitting the loop handle gene e Clip the loop handle onto the shaft Note that the loop handle must be fitted between the arrows on the shaft Slide the spacer into the slot in the loop handle e Fit the correct trimmer guard A for use with the e Fit the nut knob and screw Do not overtighten trimmer head e Now adjust the trimmer to give a comfortable working position Tighten the bolt knob Fitting the handlebar Position the handlebar as shown Fit the mounting components and tighten the knob lightly e Hang the trimmer guard on the hook on the plate holder 1 Bend the guard around the shaft and tighten it with the bolt 2 on the opposite side of the shaft Adjusting the harness and trimmer WARNING When using a trimmer it must always be hooked securely to the harness Otherwise you will be unable to control the trimmer safetly and this can e Put on the harness and hang the machine from the result in injurytp yourselfor others never support hook Now make a final adjustment so that use a harness with a defectivequick the machine is in a comfortable working position when release it hangs from the harness English 13 ASSEMBLY Standard harness Correct balance Quick rel Let the trimmer head balance at a comfortable cutting uICK release height i e close to the ground At the front is an easily accessible quick release Use this if the engine catc
28. r eyes do not rub but flush your eyes with plenty of water for at least 15 minutes See a doctor You must wash any exposed skin with copious amounts of water and soap in case of incidental contact WARNING Minimise the risk of electric shock or short circuit as follows Never insert any object into the charger s cooling slots Do not try to dismantle the battery charger Never connect the charger terminals to metal objects as this can short circuit the battery charger Use approved and intact wall sockets WARNING Do not use the battery charger close to corrosive or flammable materials Do not cover the battery charger Pull out the plug to the battery charger in the event of smoke or fire Remember the risk of fire WARNING Never connect the battery terminal to keys coins screws or other e Regularly check that the battery charger connection metal as this may short circuit the battery Never insert objects into the battery s air vents wire is intact and that there are no cracks in it e Never carry the battery charger using the cord and never pull out the plug by pulling the cord Unused batteries must be kept away from e Keep all cables and extension leads away from water metal objects such as nails coins oil and sharp edges Make sure the cable is not jewellery Do not try to disassemble or jammed in doors fences or the like Otherwise it can crush the battery cause the charger to become live Inspect e
29. rried out professionally If you need further information please contact your nearest service workshop IMPORTANT All servicing and repair work on the machine requires special training This is especially true of the machine s safety equipment If your machine fails any of the checks described below you must contact your service agent When you buy any of our products we guarantee the availability of professional repairs and service If the retailer who sells your machine is not a servicing dealer ask him for the address of your nearest service agent WARNING Never use a machine with faulty safety equipment The machine s safety equipment must be checked and maintained as described in this section If your machine fails any of these checks contact your service agent to get it repaired 10 English Control panel Make sure the machine is switched on or off when the activate deactivate button 1 is pressed and held gt 1 sec The green LED 2 is lit or turned off Flashing warning indicator 3 and green LED 2 is lit could indicate that e itis not possible to apply full power and at the same time activate the machine Release the power trigger and the machine is active e the machine is blocked Deactivate the machine Remove the battery from the machine Remove the grass or other material that is wrapped around the trimmer head e the machine is overloaded due to heavy trimming Release the power trig
30. t the checks maintenance and service instructions described in this manual Some maintenance and service measures must be carried out by trained and qualified specialists See instructions under the Maintenance heading e Only use original spare parts e Always ensure that ventilation openings are kept clear of debris e All covers guards and handles must be fitted before starting e Only use the machine in daylight or in other well lit conditions e Never use the machine in bad weather for instance in fog in rain damp or in wet locations strong winds intense cold risk of lightning etc Extremely hot weather may cause overheating of the machine Always use common sense It is not possible to cover every conceivable situation you can face Always exercise care and use your common sense Avoid all situations which you consider to be beyond your capability If you still feel uncertain about operating procedures after reading these instructions you should consult an expert before continuing English 7 GENERAL SAFETY PRECAUTIONS Important WARNING This machine produces an electromagnetic field during operation This field may under some circumstances interfere with active or passive medical implants To reduce the risk of serious or fatal injury we recommend persons with medical implants to consult their physician and the medical implant manufacturer before operating this machine WARNING Never allow c
31. tents of this Fitting the handlebar AESMA 13 operator s manual Assembling the guard mes 13 Adjusting the harness and trimmer 13 Standard harness ccccccsssssssssssseeeeeeeeeeeeeeeeesseees 14 Transport position handlebar 14 BATTERY HANDLING BAGI ee tu an 15 Battery charger Aim AM 15 Transport and storage sssssssseesserserrrrrrrrrrrrrrrn 16 Disposal of the battery battery charger and machine iesse A A 16 STARTING AND STOPPING Check before starting cccccecceeeceeeceeeeeeeeeeeeees 17 Connect battery to the machine 17 Starting and Stopping wncdcniaanccepervywerenvnenncdebcnamnenadan 17 WORKING TECHNIQUES General working instructions r 18 MAINTENANCE Inspection and maintenance n 11 21 Troubleshooting schedule cccceecccssssssseeseeeeeees 22 Maintenance schedule ccccssssseseseeeeeeeeeeeeeens 23 TECHNICAL DATA Technical data PEENE 24 EC declaration of conformity seee 25 4 English INTRODUCTION Dear Customer Congratulations on your choice to buy a Husqvarna product Husqvarna is based on a tradition that dates back to 1689 when the Swedish King Karl XI ordered the construction of a factory on the banks of the Husqvarna River for production of muskets The location was logical since water power was harnessed from the Huskvarna Riv
32. the battery is fully charged All LEDs are lit Fully charged 75 100 LED 1 LED 2 LED 3 are The battery is 50 75 lit charged LED 1 LED 2 are lit The battery is 25 50 charged The battery is 0 25 LED 1 is lit charged Pull out the plug Never jerk the power supply cable to disconnect it from the wall socket LED 1 flashes The battery is empty Charge the battery e Remove the battery from the battery charger Battery charger Charging status Lithium ion batteries can be charged whatever their WARNING Risk of electric shock and charge level The charging process can be cancelled or short circuiting Use approved and intact started whatever the battery s charge level The battery is wall sockets Make sure that the cable is not damaged A fully charged battery will not lose its not damaged Replace cable if it appears charge even when the battery is left in the charger to be damaged in any way The battery will not be charged if the battery temperature is over 50 C Connect the battery charger e Connect the battery charger to the voltage and frequency specified on the rating plate Put the electric plug in the wall socket The LED on the battery charger flashes green once Ws NE NS LED display Charging status LEDT iadhes The battery is 0 25 charged LED 1 is lit LED 2 The battery is 25 50 flashes charged e The battery will not be charged if the
33. to reduce the wear on the trimmer head Cutting e The trimmer is ideal for cutting grass that is difficult to reach using a normal lawn mower Keep the line parallel to the ground when cutting Avoid pressing the trimmer head against the ground as this can ruin the lawn and damage the tool Wwe PAANI Wi e Do not allow the trimmer head to constantly come into contact with the ground during normal cutting Constant contact of this type can cause damage and wear to the trimmer head Sweeping e The fan effect of the rotating line can be used for quick and easy clearing up Hold the line parallel to and above the area to be swept and move the tool to and fro e When cutting and sweeping you should use full throttle to obtain the best results 20 English MAINTENANCE Inspection and maintenance WARNING Always remove the battery before any maintenance on the machine A IMPORTANT Never clean the battery or the battery charger with water Strong cleaning agents can damage the plastic All servicing and repair work on the machine requires special training This is especially true of the machine s safety equipment If your machine fails any of the checks described below you must contact your service agent When you buy any of our products we guarantee the availability of professional repairs and service If the retailer who sells your machine is not a servicing dealer ask him for the address of your near
34. xtensions cords periodically and replace if damaged e Use the battery in surroundings where temperatures are between 10 C and 40 C e Do not expose the battery to microwaves or high pressure Do not use e a faulty or damaged battery charger or never use a faulty damaged or deformed battery e Never clean the battery or the battery charger with water See also instructions under the Maintenance heading e Store the battery out of reach of children e Protect the battery from rain and wet conditions English 9 GENERAL SAFETY PRECAUTIONS Do not charge e non rechargeable batteries in the battery charger or use them in the machine e the battery in the battery charge outdoors e the battery in the rain or in wet conditions e the battery in direct sunlight Use the battery charger only when the surrounding temperature is between 5 C and 40 C Use the charger in an environment which is well ventilated dry and free from dust Machine s safety equipment This section describes the machine s safety equipment its purpose and how checks and maintenance should be carried out to ensure that it operates correctly See the What is what section to locate where this equipment is positioned on your machine The life span or the runtime of the machine can be reduced and the risk of accidents can increase if machine maintenance is not carried out correctly and if service and or repairs are not ca
Download Pdf Manuals
Related Search