Hoover 48005539 Vacuum Cleaner User Manual
Contents
1. rod or pole to remove any blockage from the extension tube or flexible hose C Check if pre motor filter is fitted D Check if the separation unit needs to be cleaned Refer to Cleaning the separa tion unit USER CHECKLIST Should you have a problem with the product complete this simple user checklist before calling your local Hoover service e Is there a working electricity supply to the cleaner Please check with another electrical appliance e Is the dust container over filled Please refer to Cleaner Maintenance e ls the filter blocked Please refer to Cleaner Maintenance e Is the hose or nozzle blocked Please refer to Removing a blockage from the system e Has the cleaner overheated If so it will take approximately 30 minutes to automati cally reset Curve im uk master indd 3 IMPORTANT INFORMATION Hoover spares and Consumables Always replace parts with genuine Hoover spares These are available from your local Hoo ver dealer or direct from Hoover When ordering parts always quote your model number Hoover Service Should you require service at any time please contact your local Hoover Service Office Hoover Customer Helpline Service Should any faults occur with your cleaner during the first 12 months contact the Hoover Customer Helpline on the number below Tel 08444 995 599 Email customer services hoovercandy com Hoover have a computerised nationwide service network of over 500 engi2. ANT Always ensure the filters are fully dry before use To access the pre motor filter 1 Release the container by sliding the dust container release button towards the rear of the cleaner Lift the dust container from the cleaner main body 14 2 Hold the dust container with one hand and with the other hand rotate the bin handle anti clockwise to release it from the dust container 16 3 Remove the blue filter pack located in the dust container handle 17 4 Gently tap and wash the filter using warm water Do not use hot water or detergents Remove excess water from the filter and leave to dry fully before re using 18 5 Reassemble to filter pack once fully dry and refit to the cleaner IMPORTANT Do not use the product without the filter pack fitted To access the exhaust filter 1 Release the container by sliding the dust container release button towards the rear of the cleaner Lift the dust container from the cleaner main body 14 2 Unclip the exhaust filter cover from the dust container cradle on the cleaner main body 19 3 Using the tab remove the exhaust filter from the cleaner main body 20 4 Gently tap and wash the filter using warm water Do not use hot water or detergents Remove excess water from the filter and leave to dry fully before re using 21 3 28 2012 1 49 19 PM Cleaning the dust container multi cyclonic separation unit This cleaner uses a multicyclonic separation system unique to H
3. HOOVER CURVE INSTRUCTION MANUAL for M te e T g or a z m W z faa a May vary depending on model Certain models only May vary depending on model Certain Models Only L SSE IMPORTANT SAFETY REMINDERS This cleaner should only be used for domestic cleaning as described in this user guide Please ensure that this guide is fully understood before operating the appliance Use only attachments recommended or supplied by Hoover WARNING Electricity can be extremely dangerous This appliance is double insulated and must not be earthed This plug is fitted with a 13 amp fuse UK only IMPORTANT The wires in the mains power lead are coloured in accordance with the following code Blue Neutral Brown Live STATIC ELECTRICITY Some carpets can cause a small build up of static electricity Any static discharge is not hazardous to health AFTER USE Switch the cleaner off and remove the plug from the electricity supply Always switch off and remove the plug before cleaning the appliance or attempting any maintenance task SAFETY WITH CHILDREN ELDERLY OR THE INFIRM This appliance is not intended for use by persons including children with reduced physical sensory or mental capabili ties or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Children shou
4. he desired level 9 6 Switch off at the end of use by pressing the On Off Button Unplug and press the cord rewind button to wind the power cord back into the cleaner 10 7 To store your cleaner adjust telescopic tube to the lowest height setting and park the nozzle in the parking slot on the cleaner main body 11 ACCESSORIES AND NOZZLES All accessories can be fitted to the end of the hose handle or to the end of the telescopic tube 2 in 1 tool Combines several functions in one 12 Dusting Brush For bookshelves frames keyboards and other delicate areas To ex tend the brushes push the button on the body of the tool Crevice Tool For corners and hard to reach areas Furniture Nozzle For soft furniture and fabrics 13 Parquet Caresse Nozzle For parquet floors and other delicate floors 1U Pet Hair Remover Mini Turbo Nozzle Use the mini turbo nozzle on stairs or for deep cleaning on textile surfaces and other hard to clean areas Particularly suitable for pet hairs removal 1V Allergen Remover Mini Turbo Nozzle Use the mini turbo nozzle on stairs or for deepcleaning on textile surfaces and other hard to clean areas Particularly suitable for allergen removal 1W Grand Turbo Nozzle Use the turbo nozzle for deep cleaning on carpets 1X IMPORTANT Do not use the grand turbo and mini turbo nozzles on rugs with long fringes animal hides and carpet pile deeper than 15mm Do not keep t
5. he nozzle station ary while the brush is rotating Certain models only May vary depending on model Curve im uk master indd 2 CLEANER MAINTENANCE Emptying the Dust Container When the dust reaches the max level indicator in the container empty the dust bin IMPORTANT To maintain optimum performance do not allow the dust to sit higher than the max level 1 Release the container by sliding the dust container release button towards the rear of the cleaner Lift the dust container from the cleaner main body 14 2 Hold the dust container over a bin with one hand and use the other hand press the Dust Container Door Release Button 15 3 Close the Dust Container door and refit to the cleaner main body Cleaning the washable filters The cleaner is fitted with a blue filter pack To maintain optimum cleaning performance regularly remove the the filters and tap against the side of the bin to release dust The filters should be washed after 5 container empties or when the filter has excessive dust level IMPORTANT All bagless cleaners require regular filter cleaning Failure to clean your filters may result in air blockage overheating and product failure This may invalidate your guarantee IMPORTANT Regularly check and maintain the filters by following the filter main tenance instructions it is also recommended that you purchase new filters after every 3rd filter wash This will maintain your cleaners performance IMPORT
6. ld be supervised to ensure that they do not play with the appliance HOOVER SERVICE To ensure the continued safe and efficient operation of this appli ance we recommend that any servicing or repairs are only carried out by an authorised Hoover service engineer IT IS IMPORTANT THAT YOU DO NOT e Position the cleaner above you when cleaning the stairs e Use your cleaner out of doors or on any wet surface or for wet pick up e Pick up hard or sharp objects matches hot ashes cigarette ends or other similar items e Spray with or pick up flammable liquids cleaning fluids aerosols or their vapours as this may cause risk of fire explosion e Run over the power cord when using your cleaner or remove the plug by pulling on the power cord e Stand on or wrap the power cord around arms or legs when using the cleaner e Use the appliance to clean people or animals e Continue to use your cleaner if it appears to be faulty If the power cord is damaged stop using the cleaner IMMEDIATELY To avoid a safety hazard an authorised Hoover service engineer must replace the power cord Certain models only May vary depending on model Curve im uk master indd 1 GETTING TO KNOW YOUR CLEANER lt XE lt CHMDOVOZEZEFAL TONM9SOD gt Cleaner main body Dust Container Dust Container Release Button Dust Container Door Release Button On Off Button Cord Rewind Button Handle Suction Regulator Telescopic Tube Telescopic tube adjuste
7. neers who will quickly respond to your call and guarantee your repair for 12 months Quality Hoover s factories have been independently assessed for quality Our products are made using a quality system which meets the requirements of ISO 9001 The Environment This appliance is marked according to the European Directive 2002 96 EC on Waste Electrical and Electronic Equipment WEEE By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product The symbol on the product indicates that this product may not be treated as houshold waste Instead it shall be handed over to the appliance collection point for recycling of electrical and electronic equipment Disposal must be carried out in accordance with the local environmental regulations for waste disposal For more detailed information about treatment recovery and re cycling of this product please contact your local city office your household iii waste disposal service or the shop where you purchased the product Your Guarantee The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased The bill of sale or receipt must be pro duced when making any claim under the term
8. oover If necessary the separation unit can be disassembled from the dust container and cleaned 1 Release the dust container by sliding the dust container release button towards the rear of the cleaner Lift the dust container from the cleaner main body 14 2 Hold the dust container with one hand and with the other hand rotate the dust con tainer handle anti clockwise to release it from the dust container 16 3 Remove the multicyclonic separation unit from the dust container by pulling the handle provided 22 4 If necessary use a cloth to remove excessive dust from the multi cyclonic unit sur face 23 5 Reassemble the multicyclonic separation unit to the dust container and refit the filter pack in position 6 Reassemble the dust container handle to the bin container Refit the dust container to the cleaner Note For stubborn dirt the multi cyclonic separation unit or the dust container can be washed but care must be taken to ensure that both are completely dry before use Important For optimum performance we recommend that the multi cyclonic separation system is inspected after each empty Removing a blockage from the cleaner 1 Check if the dust container is full If so refer to Emptying the dust container 2 Ifthe dust container is empty but suction is still low A Do the filters need cleaning If so refer to Cleaning the washable filters B Check if there is any other blockage in the system Use a
9. r Parking slot Carpet amp Floor Nozzle Floor Type Selector Pedal Hose Pre motor Filter Multi cyclonic Separation Unit Dust Bin Exhaust Filter Accessories holder 2 in 1 Accessory Furniture Nozzle Parquet Nozzle Pet Hair Remover Mini Turbo Nozzle Allergen Remover Mini Turbo Nozzle Grand Turbo Nozzle ASSEMBLING YOUR CLEANER Remove all components from the packaging 1 Connect the hose to the cleaner main body ensuring it clips and locks into position To release simply press the button on the hose end and pull 2 Connect the tube upper end to the hose handle 3 Attach the accessory holder to the the telescopic tube and store the accessories on the holder 1 Connect the tube lower end to the carpet and floor nozzle 4 3 28 2012 1 49 19 PM USING YOUR CLEANER 1 Extract power cord and plug it into the power supply Do not pull the cord beyond the red marker 5 2 Adjust the telescopic tube to the desired height by moving the telescopic release button up and raise or lower the handle to the most comfortable cleaning position 6 3 Carpet and Floor Nozzle Select the type of surface to be cleaned by pressing the pedal in the nozzle 7 Hard Floor Brushes are lowered to protect the floor Carpet Brushes are raised for the deepest clean 4 Switch the cleaner on by pressing the On Off Button on the cleaner main body 8 5 Adjust the suction by moving the suction regulator to t
10. s of this guarantee Subject to change without notice 3 28 2012 1 49 20 PM
Download Pdf Manuals
Related Search