Harman-Kardon HD720 CD Player User Manual
Contents
1. MODEL NO HD720 HARMAN KARDON WOODBURY NEW YORK AC 120V 7 __ MANUFACTURED SERIAL NO Coaxial Digital Output Fixed Audio Outputs Coaxial Digital Output Connect his jack to the coaxial digital input of an external digital to analog converter for direct access to the digital signals of the HD720 DO NOT connect this jack to the standard audio inputs of any device Fixed Audio Outputs Connect hese jacks to the CD audio inputs of your receiver surround processor or preamplifier Autoplay Switch Remote Control Input Autoplay Switch When this switch is in the ON position the HD720 will automatically go into the Play mode whenever the power is urned on and a disc is in the CD drawer To disable the Autoplay func ion put the switch in the OFF position See page 14 for more information Remote Control Input Connect the output of a remote infrared sensor or the remote control output of another compatible Harman Kardon product This will CHINA Remote Control Output AC Power Cord enable the remote control system to operate even when the front panel Remote Sensor J is blocked It will also allow use of the HD720 with optional external control systems Remote Control Output Connect this jack to the input of another compatible Harman Kardon remote controlled device to have the remote sen2. To avoid damage to the disc and player always seat discs so that they are centered in the tray Do not lift the player while the disc tray is opening or closing as this may cause the disc to unseat from the tray and possibly jam Headphone Listening You may listen to the output of the HD720 through headphones by plugging a set of standard headphones with a 4 headphone plug into the front panel Headphones Jack JJ The volume of the headphone output may be adjusted with the Headphones Level knob IB Note that changing the headphone level will not change the volume for the main audio output This is a fixed out put and it is changed using the volume control on your receiver preamplifier or surround processor Display Dim In some instances it may be desirable to reduce the brightness of the display or to turn it off completely To do this press the Display button EJ once to dim the display to half brightness Press it again to turn the display off A third press will return the display to normal level Time Display The HD720 s time display is capable of showing a wide range of information about a CD In normal operation the display will show the total running time of a CD after the disc is first put in the unit When the disc is played the display will show the running time of a track in play Each time the track changes the time display will reset to O 0 0 O and begin to increase again as the disc pl
3. WARNING To REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT ATTENTION POUR EVITER LES CHOCS ELECTRIQUES INRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU AU FOND Cleaning When the unit gets dirty wipe it with a clean soft dry cloth If necessary wipe it with a soft cloth dampened with mild soapy water then a fresh cloth with clean water Wipe dry immediately with a dry cloth NEVER use benzene aerosol cleaners thinner alcohol or any other volatile cleaning agent Do not use abrasive cleaners as they may damage the finish of metal parts Avoid spraying insecticide near the unit Moving The Unit Before moving the unit be certain to dis connect any interconnection cords with other components and make certain that you disconnect the unit from the AC outlet Important information for the user NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules The limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communi
4. Press this button put the HD720 in the Intro Scan mode When you press the button he unit will play the first 15 seconds of each track on the disc and then move to the next track Press the but on again to defeat the function and continue full play of the current track See page 12 for more information D Display Button Press this button once to dim the front panel display to half brightness Press it again to turn the display lights off completely Another press will return the display to normal brightness To prevent possible damage to your speakers and other components in your audio system it is important that ALL components including the HD720 and receivers are turned off and unplugged from their AC power source when installing any new component Connecting the HD720 to your audio system is simple Using standard RCA to RCA interconnect cords connect the left and right Fixed Audio Output jacks on the rear panel to the CD input jacks on your receiver surround processor or preamplifier If your system includes an optional external digital to analog converter or if you are using a receiver or other pro cessor that has the capability to decode PCM digital input signals connect the Coaxial Digital Output jack to the Datastream Digital input on the decoder Make certain to use a coaxial style interconnect cable as standard udio cables will not perform as well Install the two AA batteries supplied wit
5. but then turned off using the remote control the Status Mode Indicator Pp will glow amber In that case the HD720 may be turned on using the Power On button on the remote control To load a disc first press the Open Close button 7 taking care to make certain that the space in front of the drawer is not obstructed Note that if the drawer is blocked when attempting to open it it will automatically close within five seconds to protect the mechanism Load the disc in the tray with the printed label side facing up Make certain that the disc is centered in the tray Either 5 or 3 discs may be used When a 3 disc is played it should be carefully centered within the smaller ridges inside the cassette drawer Surface To retract the drawer back into the player after loading a disc press the Open Close button fi Operation 10 After a brief pause the Information Display will show the total number of tracks on a disc and the total running time of the disc The number of tracks will be shown in a large number within the display and all of the available tracks will light in the smaller boxed number indicators at the bottom of the display TRACK SEC I Eb m 12345678910112 NOTE When there are more than 20 tracks on a disc the OVER gt indicator will light in the bottom right corner of the display NOTE If a disc with CD ROM data or other information that is not compatible with a CD player is used t
6. kd H 15 E Power Switch E Skip Buttons Headphones Level E Status Mode Indicator E Display Button Headphones Jack Ei Remote Sensor Window E Time Button Open Close E Play Button fl Program Button IE Information Display H Stop Clear Program Check Button E Disc Drawer G Pause Button f Random Button Search Buttons IE Repeat Button Ei Power Switch Press this switch to apply power to the HD720 When the switch is first turned on the Status Mode Indicator light BJ sur rounding the switch will turn green Once the unit has been turned on with this switch it may be operated from either the front panel or remote control Press the switch again to turn the unit completely off E Status Mode Indicator When the HD720 is in the ON mode this indicator will glow green When the unit has been placed in the Standby mode by pressing the Off button on the remote the indicator will glow amber indicating that the unit is still connected to the AC main supply and is ready to be turned on from the remote control EJ Remote Sensor Window The sensor behind this window receives commands from the remote control Keep this area clear if you wish to use the HD720 with a remote control E Play Button Press this button to start the playback of a CD If the CD drawer is open pressing this button will automatically close the drawer E Stop Clear Press this button to stop the disc currently being played During programming functions t
7. may wish to flatten it This is done by carefully slitting the tape seams on the bottom and collapsing the carton down to a more two dimensional appearance Other cardboard inserts may be stored in the same manner Packing materials that cannot be collapsed should be saved along with the carton in aplastic bag If you do not wish to save the packaging materials please note that the carton and other sections of the shipping protec tion are recyclable Please respect the environment and discard those materials at a local recycling center Typographic Conventions In order to help you use this manual with the remote control front panel controls rear panel connections and on screen menus certain conventions have been used EXAMPLE bold type indicates a specific remote control or front panel button or rear panel connection jack EXAMPLE OCR type indicates a message that is visible on the front panel information display El number in a square indicates a specific front panel control number in an oval indicates a button or indicator on the remote number in a circle indicates a rear panel connection Front Panel Controls 4 harman kardon 0720 RANDOM ANTRO REPEAT AL TONE TAH m ELAPSED gy MR op eS REMAIN TOTAL ii PROGRAM 1234567891011 1213 14 15 16 17 18 19 20 OVER Display Program Random Play Stop Clear Pause 00009696696069 1 H BH a
8. sequence The marked passage will not play continuously until the Stop button is pressed See page 14 or more information on Repeat Play Skip Buttons Press one of hese buttons to move to the next rack or to move back to the previous track ke Search Buttons Press one of hese buttons to search forward gt or backwards lt lt through a disc to locate a particular portion of he selection being played Play Button Press this button to start the playback of a CD If the CD drawer is open pressing this button will automatically close the drawer Stop Press this button to stop the disc currently being played Pause Button Press this button once to momentarily stop a disc When the button is pressed again the disc will resume play at the point it was stopped Random Button Press this button to put a disc into play and to have all of the tracks played ina random order See page 10 for more information Time Button Press this button o select the time display In normal operation the display will show the running time of a track being played Press the button once to check the ime remaining for the track in play Press the button a third time to view he total play time remaining for the disc in play Check Button Press this button o check the order of tracks pro grammed into the HD720 s memory See page 13 for complete information on programming the HD720 Intro Button
9. Harman Kardon HD720 Compact Disc Player Owner s Manual harman kardon Staple or clip original invoice here W Owner s Manual HD720 Compact Disc Player Table of Contents Introduction an a aaa a Nga aa daa aga 1 Safety Information ereere ga KANAN E 2 3 Unpachitigns uch ary ay aa Ep pa NG an 3 Front Panel Controls a 45 Rear Panel Connections 0 00 e eves ees 6 Remote Control Functions 7 8 TAS ahh eer a b de nd Abert ceed ours 9 Operation sanga dots bia aapa a a Kaanan 10 11 Normal Play o a 10 11 Disc Handling Notes 11 Headphone Listening 11 Display Dit ss wangwa na see caked 11 Time Display sa dss poy sag ows a a 11 Program Seth asar aan aa bag aa ga agan 12 Search saang ang se a ag nag aaa added 12 Skips Ai aan an a a D arate na aa 12 Titro Search siaran aaa odana 12 Programmed Play Operation 13 14 Programmed Play eee eee 13 Checking Program Contents 13 Clearing Program Tracks 13 Repeat Programmed Play 14 Auto Play snang anaa ak 14 Troubleshooting sss sssusa aaa a anih 15 Technical Specifications 16 harman kardon 250 Crossways Park Drive Woodbury NY 11797 H A Harman International Company 1998 Harman Kardon Incorporated Thank you for choosing the Harman Kardon HD720 CD player The HD720 is an except
10. When entering track numbers from the remote control simply enter the numbers using the Numeric Controls Be certain to enter the second digit of track numbers 10 and above within two seconds of the first number Tracks may also be entered from the front panel or remote by pressing the Skip buttons EJ until the desired track number appears Press the Program button i to enter the track to memory and then proceed to select the next track you wish to program As tracks are entered two displays will appear in the display The first will indi cate the total number of tracks that have been programmed along with the last track number entered TRACK PUG PROGRAM 34 67 9 13 The second display will show the total cumulative running time of all tracks entered along with the last track number programmed After 5 seconds only this display will appear if no other track number is entered TRACK MIN SEC eeh m PROGRAM 34 67 9 As each track is added to the program list its number will illuminate at the bottom of the display When you have entered all the tracks that you wish to program press the Play button H to begin playback of the programmed sequence The tracks will now play back in the order in which they were programmed When the complete set of programmed tracks has played the unit will stop The program will remain and may be started again by pressing the Play button D The program w
11. al Format Sampling Frequency D A Conversion Oversampling Discrete Analog Output Section General All features and specifications are subject to change without notice Error Correction Frequency Response Total Harmonic Distortion THD Dynamic Range Signal to Noise Ratio Channel Separation Line Output Level Power Requirement Power Consumption Dimensions Width Height Depth Weight 44 1 kHz 1 bit Multilevel Delta Sigma Conversion 8 times CIRC System 8Hz to 20kHz 1dB 0 006 96dB 105dB 92dB 2 0V RMS AC 120V 60Hz 12 Watts 17 3 440 mm 43 110 mm 9 1 232 mm 9 3 Ibs 4 2 kg harman kardon 0720 compact aise Printed in China Part 1111 HD720 CEC6P10068030
12. ays To view the time remaining on an indi vidual track press the Time button Id D once The display will now show the time left in the track in play and the REMAIN indicator will light next to the time display as a reminder of the dis play s status To view the total time remaining to play on the disc press the time button twice The REMAIN and TOTAL indicators will light to remind you of the function in use NOTE When a disc contains more than thirty 30 tracks the time display may read This is normal and it does not indicate any problem with the disc or the HD720 The HD720 is equipped with a variety of functions that make it easy to search for specific parts of any CD Search If you wish to quickly scan through a disc to locate a particular passage or program press the Search buttons The Forward Search button pr plays the disc forward in high speed while the Reverse Search button plays the disc backwards in high speed When the desired part of the disc is heard release the Search button to resume normal play speed Program Search 12 Skip To move from one track on the disc to another press one of the Skip buttons E Pressing the Forward Skip button gt will move you forwards through the disc one track at a time while pressing the Reverse Skip button ma a will move you back one track at a time The Skip buttons may be used when the HD720 is either playing
13. cation However there is no guarantee that harmful interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television recep tion which can be determined by turning the equipment off and on the user is encouraged to try to correct the inter ference by one or more of the following measures Safety Information 3 m Reorient or relocate the receiving antenna m Increase the separation between the equipment and receiver m Connect the equipment into an outlet on a circuit different from that to which the receiver is connected m Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept interference received including interference that may cause undesired operation NOTE Changes or modifications may cause this unit to fail to comply with Part 15 of the FCC Rules and may void the user s authority to operate the equipment Unpacking The carton and shipping materials used to protect your new receiver during ship ment were specially designed to cushion it from shock and vibration We suggest that you save the carton and packing materials for use in shipping if you move or should the unit ever need repair To minimize the size of the carton in storage you
14. e proper operation and to avoid the potential for safety hazards place the unit on a firm and level sur face When placing the unit on a shelf be certain that the shelf and any mounting hardware can support the weight of the product m Make certain that proper space is pro vided both above and below the unit for ventilation If this product will be installed in a cabinet or other enclosed area make certain that there is suffi cient air movement within the cabinet m Do not place the unit directly on a carpeted surface m Avoid installation in extremely hot or cold locations or an area that is exposed to direct sunlight or heating equipment m Avoid moist or humid locations m Do not obstruct the ventilation slots on the top of the unit or place objects directly over them CAUTION To REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to consittute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance
15. e used with this product As with all electrical devices do not run power cords under rugs or carpets or place heavy objects on them Damaged power cords should be replaced immediately by an authorized service depot with cords meeting factory specifications Handle the AC Power Cord Gently When disconnecting the power cord from an AC outlet always pull the plug never pull the cord If you do not intend to use the unit for any considerable length of time disconnect the plug from the AC outlet Do Not Open The Cabinet There are no user serviceable compo nents inside this product Opening the cabinet may present a shock hazard and any modification to the product will void your guarantee If water or any metal object such as a paper clip wire or a staple accidentally falls inside the unit disconnect it from the AC power source immediately and consult an authorized service station Safety Information 2 CAUTION The HD720 uses a Laser System To prevent direct exposure to the laser beam do not open the cabinet enclosure or defeat any of the safety mechanisms provided for your protec tion DO NOT STARE INTO THE LASER BEAM To ensure proper use of this prod uct please read this Owner s Manual carefully and retain it for future use Should the unit require maintenance or repair please contact your local Harman Kardon Service Station Refer servicing to qualified personnel only Installation Location m To assur
16. h the HD720 s remote by turning the remote over so that you are holding the bottom side up Press lightly on the embossed rrow on the cover and gently slide the cover towards you in the direction of the rrow Insert the batteries inside the com partment being careful to follow the nd polarity indications at the bottom of the compartment Replace the cover by placing it on the remote and sliding it back towards the top of the remote Installation 9 NOTE When replacing batteries it is always a good idea to replace both at the same time When the unit will not be used for an extended period of time it is also a good idea to remove the batteries so that the potential for corrosion or damage is avoided Connect the power to a non switched AC wall outlet or to the accessory outlet on the rear of another audio device in your system and you are ready to go NOTE When using the accessory outlet on another product to power the HD720 make certain that it has the ability to power a device that draws at least 14 watts of current in addition to the requirements of other devices that may be plugged into the accessory outlets If you use a switched outlet it is impor tant to remember that the host product must be turned on in order for the HD720 to operate Normal Play To play a disc first turn the HD720 on using the Main Power Switch jj If the unit has previously been turned on with the Main Power Switch
17. he display will indicateNO AUDIO When a mixed CD Audio and CD ROM disc is played the HD720 will automati cally bypass the data portion of the disc and search for the CD Audio section To play all of the tracks on the disc in order press the Play button HJ D A play indication m will appear in the Information Display E To play all of the tracks in random order press the Random button E The RANDOM indicator will light when that mode is in use You may also select a specific track directly by entering the track number via the Numeric Controls Simply enter the track number by press ing the buttons that correspond to the desired track and the unit will automati cally find it and begin play Note that when a two digit track number is being entered the second digit of the number must be pressed within two seconds of the first digit While the disc is playing the track being played will show both as a large number in the middle of the display and as a smaller flashing number at the bottom of the display The elapsed time of the track being played will also appear in the display As a disc plays the track num bers will change and the time will reset to 0 0 D at the start of each new track To momentarily pause the play of a disc press the Pause button EJ Note that a Pause indication will appear in the display to remind you that the disc is paused Press either the Play button Ey or the Pause but
18. his button is also used to clear the system memory see page 13 J Pause Button Press this button once to momentarily stop a disc When the button is pressed again the disc will resume play at the point it was stopped Front Panel Controls 5 Search Buttons Press one of these buttons to search forward bP or backwards lt lt through a disc to locate a particular portion of the selection EJ Skip Buttons Press one of these buttons to move to the next track B gt or to move back to the previous track Ha a E Display Button Press this button once to dim the brightness of the display Press it again to turn the dis play off completely An additional press of the button will return the display to normal brightness E Time Button Press this button to select the time display In normal operation the display will show the running time of a track being played Press the button once to check the time remaining for the track in play Press the button a third time to view the total time remaining for the disc in play Program Button This button is used to program the playback of a disc in a particular order See page 13 for complete instructions on programming the HD720 A Program Check Button Press his button to check the order of racks programmed into the HD720 s memory See page 13 for complete information on programming the HD720 E Random Button Press this button to put a disc into play and
19. ill remain in the player s memory as long as the disc is not removed NOTE Once the disc drawer is opened the program information is lost and must be re entered even if the same disc is placed back in the machine Checking Program Contents To check the contents of a program press the Check button A Each press of the button will show the actual track number the position the track occupies in memory e g second track to play and the cumulative time for all tracks that have been programmed up to the one that is indicated Clearing Program Tracks To clear one or all tracks from a program first press the Stop button HD Pressing the Clear button on the remote or the Stop Clear button Ej on the front panel will remove tracks from the program sequence one at a time starting with the last track programmed For example if track 6 was the last selection in the program order it will be the first to be deleted from the program regardless of how many tracks are on the disc and how many individual tracks have been programmed To clear all tracks at once press and hold either the Stop Clear button BH on the front panel or the Clear button on the remote until the PROGRAM indicator goes out and the display of the disc s total running time and number of tracks appear You may also clear the total contents of a track programming sequence by pressing the Open Close button F4 or by turning the unit off Prog
20. ionally well engineered product that offers high performance and ease of use We ask that you take a few minutes to read through this Owner s Manual to familiarize yourself with the controls and functions This brief investment of time will yield dividends in the form of years of listening pleasure Introduction 1 If you have any questions about this product its installation or operation please contact your dealer as they are your best source of local information Description and Features m Digital Output for Direct Connection to Outboard Digital to Analog Converters m Sophisticated Programming Features to Automatically Play Tracks in Preprogrammed or Random Order m Intro Search to Automatically Scan a Brief Portion of Each Track to Quickly Locate Your Favorite Selections m Sophisticated Digital to Analog Processing Using Premium Grade 1 Bit Circuits with Multilevel Delta Sigma Conversion Important Safety Information Verify Line Voltage Before Use Your HD720 has been designed for use with 120 volt AC current Connection to a line voltage other than that for which it is intended can create a safety and fire hazard and may damage the unit If you have any questions about the voltage requirements for your specific model or about the line voltage in your area contact your selling dealer before plugging the unit into a wall outlet Do Not Use Extension Cords We do not recommend that extension cords b
21. o have all of the tracks played in a random order See page 10 for more information JU Repeat Button Press this button once to continually repeat all tracks on a disc Press it again to repeat only the track currently being played See page 14 for more information I Headphones Level Turn this knob to increase or decrease the volume level for headphones con nected to the HD720 s Headphones Jack Note that changing this level will not change the sound level for the unit s main output as that remains constant Headphones Jack Connect a set of standard headphones to this jack for private listening Open Close Press this button to open or close the disc drawer The drawer may also be closed by pressing the Play button EJ or by gently pressing the edge of the drawer However we do not rec ommend pushing the drawer as damage to the transport mechanism may result E Information Display This display provides details about the operation of the HD720 E Disc Drawer To play a disc open the drawer by pressing the Open Close button F and place a full size 5 or CD single 3 disc in the drawer with the printed side facing upwards Press the Play button EJ to close the drawer and begin playback Rear Panel Connections 6 9 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR DIGITAL OUTPUT AUTOPLAY OUTP REMOTE COAXIAL
22. or stopped If the unit is stopped the Skip buttons may be used to locate the first track to be played The Play button EJ must be pressed to begin play If the Skip but tons are used while the unit is already playing the audio output will stop while the new track is located and play will automatically resume after the Skip button is released Intro Search This feature lets you locate a track by playing the first 15 seconds of each track When the Intro button is pressed the unit will play only 15 seconds of each track and then automatically move to the next track When you have reached a track that you wish to listen to in its entirety press the Intro button again to resume normal operation When the Intro feature is activated the INTRO indicator will illuminate in the Information Display jf to remind you that Intro Search is in use Programmed Play Operation The HD720 s advanced programming capability enables you to preset the order in which tracks play to repeat one track or all tracks and to repeat any portion of a disc without regard to track numbers Programmed Play To program the order in which the tracks on a disc play begin by pressing the Program button fj Note that the PROGRAM indicator will light in the Information Display E The total number of tracks and total disc playing time is also displayed You may now begin to enter the tracks in the order in which you wish to have them play
23. rammed Play Operation To remove tracks from the middle of a previously programmed sequence press the Check A D button and then press the Skip buttons EJ until the desired track number appears in the dis play Press the Clear or Stop Clear E button to remove the track from the sequence Repeat Programmed Play The HD720 s programming system enables you to repeat either a single track the entire disc or a specially programmed passage that you select Repeat All To repeat all of the tracks on a disc press the Repeat 1 All button or the Repeat button d once until the REPEAT and ALL indicators light up When you see these indicators the entire disc will play through to the end and then start again from the beginning The disc will play continually until the Stop button BH is pressed 14 Repeat One To repeat the track in play press the Repeat 1 All button or the Repeat button Z twice The REPEAT and ONE indicators will light and the track will continue to play over and over again continuously If the track is changed by pressing the Skip buttons EJ while the Repeat function is in use the newly selected track will be repeated To stop the repeat play press the Stop button J or press the Repeat button H until the REPEAT indicator goes out Repeat A B The HD720 may be programmed to repeat any section within a track or a complete passage or program that includes material in a series of track
24. s To program the unit for A B play first locate the point on the disc where you wish to begin the repeated section At that point press the Repeat A B button The REPEAT and A indicators will light in the Information Display to show that the program process has start ed Let the disc continue to play until you have reached the end of the section to be repeated When the end point is reached press the Repeat A B button again Note that the REPEAT and A B indicators will now be illuminated Once the Repeat A B button is pressed for the second time to complete the programming the HD720 will auto matically go to the start of the selected passage and continue to play the section over and over To resume normal play press the Repeat A B button again The REPEAT and A B indicators will go out and the rest of the disc will play normally Auto Play The HD720 may be programmed to auto matically go into the play mode when the unit is turned on To use this feature insert a disc in the drawer and close the drawer as explained on page 10 Next locate the Autoplay switch on the rear panel Place the switch in the ON position and then either turn the unit off by pressing the front panel Power Switch EJ until the Statue Mode Indicator FJ goes dark or place the unit in the Standby mode by pressing the Power Off button on the remote When the HD720 is turned on using either the Power Switch E or the Power On bu
25. sor on the HD720 provide signals to other products AC Power Cord Connect this plug to an AC outlet If the outlet is switch controlled make certain that the switch is in the ON position Remote Control Functions 7 _ Power Off b Power On OCRA Repeat 1 All Button gt 9 Clear Button Repeat A B Button Skip Buttons Search Buttons Play Button Stop Pause Button 0 INTRO Random Button D Time Button Check Button Intro Button Display Button PROGRAM CLEAR CHECK TIME co lee Le e Repeat CA ALL A BD RANDOM ey Saas 606 9 90 Los HD 720 harman kardon la a SKIP gt lI E a f l D L JX J J a a SEARCH gt gt a eaaa AN cama a 8 9 909 D Power Off Press this button to put the unit in the Standby mode Power On Press this button to turn on the HD720 Note that in order for the Power On button to operate the front panel Power Switch J must be pressed and the Status Mode Indicator FJ should glow amber See page 11 for more information Numeric Controls Press these buttons to select a specific track on a disc The unit will immediately search for the track and begin to play it For tracks 1 through 9 on a disc you need only press the desired number For tracks 10 and above the second digit of the number must be entered within two seconds of the firs
26. t digit See page 10 for more information These buttons are also used to enter track numbers into the memory for pre programmed play lists See page 13 for complete information on programming the HD720 Program Button Press this button to begin the process of pro gramming the HD720 to play the tracks on a disc in a specific order Once the button is pressed enter each of the desired track numbers in quick succession using the Numeric Controls When you have entered the tracks to be played press the Play button to begin the programmed sequence See page 13 for complete information on programming the HD720 Remote Control Functions 8 Clear Button Press this button to remove tracks from a programmed sequence Each press of the button will remove one track starting with the last track programmed to play See page 13 for complete informa tion on programming the HD720 Repeat 1 All Button Press this button once so that the REPEAT and ALL indicators are illuminated to repeat all tracks on the disc Press the button a second time to repeat only the track that is currently being played and note that the REPEAT and ONE indicators will light in the Information Display See page 14 for more information on Repeat Play Repeat A B Button Press this button to repeat a segment of the disc Press the button once to mark the start of the portion to be repeated Press it again at the end of the desired
27. ton FJ to resume normal play To stop the disc press the Stop Clear button EJ D When the Stop button is pressed the display again will show the total number of tracks and total running time of the disc To remove a disc from the player press the Open Close button fff To prevent dirt and dust from entering the unit do not leave the disc tray open To place the unit in a Standby mode press the Power Off button on the remote The Status Mode Indicator H will glow amber indicat ing that the unit is off but ready to accept a Power On command from the remote If the disc drawer is open it will automatically close when the unit is placed in the Standby mode This ensures that the unit will not be harmed from dust dirt or inadvertent damage to the drawer mechanism Operation 11 Note that the unit is not removed from AC main power when it is in the Standby mode During long periods of inactivity it is recommended that the Main Power Switch ff be used to turn the unit off The Status Mode indicator will not be lit when the unit is totally turned off Remember to turn the unit back on with the Main Power Switch in order to use the remote control Disc Handling Notes When loading or unloading discs it is best to hold them by the edges While Compact Discs are very reliable rough handling may damage them Avoid scratching the bottom non printed side of discs or any handling which will leave fingerprints
28. tton the unit will automatically go into the Play mode and the disc will play through from the first track to the last To return the unit to normal operation put the Autoplay switch in the OFF position Troubleshooting Guide SYMPTOM No lights on Front Panel Troubleshooting 15 CAUSE e No AC power SOLUTION e Make certain AC power cord is plugged into a live outlet Remote does not appear to operate e Main Power Switch turned off e Weak batteries e Blocked sensor e Turn on Main Power Switch e Install fresh batteries observing polarity indications e Remove obstructions from the front panel sensor or connect a remote sensor to the Remote In jack on the rear panel Front panel lights but CD does not play e Disc upside down e Reload disc with label side facing up Play indicator lights but no sound is heard e Poor connections e Wrong source connected e Make certain connections are secure and made to the correct e g CD input e Select CD source on receiver or preamp Sound skips or stutters during play e Disc may be damaged e Surface vibrations e Try another disc e Isolate the unit from vibration by placing it on a firm surface or move it further away from speakers Sound is continually distorted e Incorrect input e Make certain that the HD720 is connected to a line level audio input NOT a digital audio or phono input Technical Specifications Sign
Download Pdf Manuals
Related Search