Harbor Freight Tools 4077 Air Compressor User Manual
Contents
1. Thumbwheel to the off position Lift up on the Valve Lock and unplug the unit Store the Cord Cigarette Plug 11 in the recessed holder in the unit FIGURE 2 Ball Needle SKU 04077 Parts List Part No Description Hull Cylinder Head Gauge Plug Rubber Hose Air Outlet Seal Motor Shaft Gasket Power Cord Cigarette Plug Maintenance 1 Visually inspect the unit before each use to make sure the hoses are properly attached and the hoses and the power cord are not frayed or torn 2 Check that the cigarette plug is clean of dirt grease or debris 3 Make sure the universal outlet adapter is clean of dirt grease or debris PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER NOR DISTRIBU TOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO NOTE Some parts are listed and2. for lubricating and changing accessories Inspect tool cords and air hoses periodically and if damaged have them repaired by an authorized technician The handles must be kept clean dry and free from oil and grease at all times 10 Disconnect Compressor Disconnect cigarette lighter plug in when not in use 11 Avoid unintentional starting Be sure the thumbwheel switch is in the Off position when not in use and before plugging in 12 Stay alert Watch what you are doing use common sense Do not operate any tool when you are tired 13 Check for damaged parts Before using any tool any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function Check for alignment and binding of moving parts any broken parts or mounting fixtures and any other condition that may affect proper operation Any part that is damaged should be properly repaired or replaced by a qualified technician Do not use the tool if any switch does not turn On and Off properly 14 Guard against electric shock Prevent body contact with grounded surfaces such as pipes radiators ranges and refrigerator enclosures 14 Replacement parts and accessories When servicing use only identical replacement parts Use of any other parts will void the warranty Only use accessories intended for use with this tool Approved accessories are available from Harbor Freight Tools 16 Do not operate tool is u
3. CENTRAL PNEUMATIC MINI AIR COMPRESSOR 250 PSI Model 04077 ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd Camarillo CA 93011 Visit our Web site at http www harborfreight com Copyright 2003 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools For technical questions and replacement parts please call 1 800 444 3353 Specifications Power Requirements 12 VDC Maximum Pressure 250 PSI Pressure Gauge 0 300 PSI 0 20 Bars Overall Dimensions 5 1 2 x 2 7 8 W x 4 7 8 H Power Cord Length 10 Feet including switch Hose Length 18 with valve adapter Includes two nozzle adapters sport needle built in cigarette lighter plug storage slot Save This Manual You will need the manual for the safety warnings and precautions assembly instructions operating and maintenance procedures parts list and diagram Keep your invoice with this manual Write the invoice number on the inside of the front cover Keep the manual and invoice in a safe and dry place for future reference Safety Warnings and Precautions WARNING When using tool basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment Read all instructions before using this tool 1 2 Keep work area clean Cluttered areas invit
4. d Cigarette Plug 11 into the 12 Volt receptacle or cigarette lighter in the car If you run your car to charge the battery while using this Compressor never run the car in an enclosure of any kind Your car emits Carbon Monoxide an odorless colorless gas which is extremely lethal Note When attaching the Air Outlet 6 to a tire or adapter lift the Valve Lock see Assembly Drawing on page 6 Then attach the hose to the tire or adapter and then lock down the Valve Lock To remove it from the tire or adapter lift the Valve Lock and remove 4 If you are going to fill a standard tire then no adapter is needed as the Air Outlet 6 end has a universal tire adapter 5 To fill a standard athletic ball thread on the Sports Needle accessory 6 When using the unit as an air blower thread on the appropriate sized adapter two included See FIGURE 2 Warning Make sure that no one is touching the Compressor when it is in operation The Compressor will become very hot avoid being burned 7 Attach the Compressor to the item you wish you inflate as explained in the Note above 8 Turn on the Compressor by sliding the Thumbwheel to the on position Warning Do not allow the Compressor to run for more than 15 minutes at a time After 15 minutes allow it to cool for 5 minutes and then you may resume inflation Failure to do so may cause the unit to overheat and burn out 9 When you are finished turn off the Compressor by sliding the
5. e injuries Observe work area conditions Do not use machines or power tools in damp orwet locations Don t expose to rain Keep work area well lighted Do not use electrically powered tools in the presence of flammable gases or liquids Keep children away Children must never be allowed in the work area Do not let them handle machines tools extension cords or air hoses Store idle equipment When not in use tools must be stored in a dry location to inhibit rust Always lock up tools and keep out of reach of children Use the right tool for the job Do not attempt to force a small tool or attachment to do the work of a larger industrial tool There are certain applications for which this tool was designed It will do the job better and more safely at the rate for which it was intended Do not modify this tool and do not use this tool for a purpose for which it was not intended Dress properly Do not wear loose clothing or jewelry as they can be caught in moving parts Protective electrically non conductive clothes and non skid footwear are recommended when working Wear restrictive hair covering to contain long hair Use eye and ear protection Always wear ANSI approved impact safety goggles Do not overreach Keep proper footing and balance at all times Do not reach over or across running machines or air hoses SKU 04077 Page 2 9 Maintain tools with care Keep tools clean for better and safer performance Follow instructions
6. nder the influence of alcohol or drugs Read warning labels if taking prescription medicine to determine if your judgement or reflexes are impaired while taking drugs If there is any doubt do not operate the Compressor 17 Maintenance For your safety maintenance should be performed regularly by a qualified technician Note Performance of the compressor if powered by line voltage may vary depending on variations in local line voltage Warning The warnings cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur It must be under stood by the operator that common sense and caution are factors which cannot be built into this product but must be supplied by the operator Unpacking When unpacking check to make sure the parts listed on page 5 are included If any parts are missing or broken please call Harbor Freight Tools at the number on the cover of this manual as soon as possible SKU 04077 Page 3 Operation 1 Remove the Power Cord Cigarette Plug 11 from the recessed holder on the unit See FIGURE 1 FIGURE 1 EXPLOSION DANGER Before inflating tires or toys check the manufacturer s recommended air pres sure Do not exceed that pressure Over inflation may result in an explosion 2 Check to make sure the Thumbwheel Switch on the power cord is in the off position 3 Situate the Compressor outside of the car 3 Plug the Cor
7. shown for illustration purposes only and are not available individually as replacement parts SKU 04077 Page 5 Assembly Drawing Valve Lock Page 6 SKU 04077
Download Pdf Manuals
Related Search