GPX CC208S Clock Radio User Manual
Contents
1. Control Definitions 1 10 11 12 13 14 15 16 17 Stop Button Press the Stop Button to stop a CD during play Skip Search Hour Minute Buttons Press the Skip Search Hour Minute Buttons to skip through tracks on a loaded CD when in CD mode Press and hold the Skip Search Hour Minute Buttons to search through individual tracks on a loaded CD when in CD mode Press the Skip Search Hour Minute Buttons to set the hour and minute when setting the time and alarm time Play Pause Button Press the Play Pause Button to play or pause a loaded CD Snooze Button Press the Snooze Button to delay the alarm for an additional 10 minutes after the alarm has sounded Tuning Dial Turn the Tuning Dial to adjust the AM and FM radio station when in radio mode AM FM CD Switch Adjust the AM FM CD Switch to switch between AM FM and CD mode Repeat Button Press the Repeat Button consecutively to repeat an entire CD or an individual track from a loaded CD Random Button Press the Random Button to play tracks from a loaded CD in a random order Clk Set Button Press the Clk Set Button to set the time See Setting the Clock in the operations2. Alm Set Press the Alm Set Button to set the alarm See Setting the Alarm in the operations FM St The FM Stereo indicator will illuminate when the radio is in FM Stereo mode Radio Station Display The Radio Station Display shows the AM or FM radio station Sleep Button Press the Skip Search Hour Minute Button to set the hour and minute after Press and hold the Sleep Button to set the sleep timer The unit must be set to Auto mode for the sleep timer to work Volume Buzz Dial Turn the Volume Dial to adjust the volume output from the unit Turn the Volume Dial all the way to Buzz to sound the buzzer when the alarm sounds Auto Off On Button Adjust the Auto Off On Button to turn the unit off and on or set the unit to Auto when setting the alarm Dimmer Switch Use the Dimmer Switch to adjust the brightness of the LCD display Battery Backup Requires a 9 Volt Battery Not Included Use the Battery Backup to save the time and alarm times in case of a power outage Service Information Address Phone 1 314 621 2881 Fax 1 314 588 1805 Email prodinfo gpx com Website www gpx com 2116 Carr Street St Louis MO 63106 To download this Instruction Man ual in English Spanish or French visit the Support section at www gpx com Para descargar este manual de instrucci n en ingl s espa ol o franc s visite la secci n de la ayu da en www gpx com Pour t l charger ce manuel d instruction
3. CC208S INSTRUCTION MANUAL Contents Warnings and Precautions escceceeceeceeeeeeeeeeesecececeeeeceeeeeeeeseeteesennaaeeees 2 Important Safety INStrUCtiOns cecceceeeceeceeeeeeeeeeeceeeeeeaeceeeeeeeeeeeeteesenensaeeees 3 In the Box 8 Powering the Unit c ccceccccceceeeeeeeeeeeeecneaeeeeeeeeeeeeeetesseneneaeees 4 Setting the Clock 8 Setting the Alarm ccceceecceceeeeeeeeeeeeeeceneeeeeeeeeeeees 5 Listening to the Radio amp Listening to a CD ooooococccncnncciccccnconcononnncnonononannnanannnns 5 Location of Controls amp Control DefinitiONS oonmooccccnnnnnnccnnnnnccccnnnanncccnnnnns 6 7 Service Information Warnings and Precautions TO PREVENT FIRE OR SHOCK HAZARDS DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE A This symbol located on back or bottom of the unit is intended to alert the user to the presence of uninsulated may be of sufficient magnitude to constitute a risk of electric shock to persons A This symbol located on back or bottom of the unit is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance EN This product utilizes a Class 1 laser to read Compact Discs This laser Compact Disc Player is equipped with safety switches to avoid exposure when the CD door is open and the safety interlocks are defeated Invisible laser radiation is present wh
4. en anglais espagnol ou le Frangais visitez la section de soutien Www gpx com 2007 Digital Products International DPI Inc All trademarks appearing herein are the property of their respective owners All products subject to change without notice
5. the Box CC208S Documentation Powering the Unit Power the unit by connecting it to a standard AC outlet 120V 60Hz via the attached AC cord AC 120V 60Hz Setting the Clock l 2 Press and hold the Clk Set Button While holding the Clk Set Button press the Skip Search Hour Minute Buttons to adjust the hour and minute Release the CIk Set Button to set the time Setting the Alarm 1 2 Press and hold the Alm Set Button While holding the Alm Set Button press the Skip Search Hour Minute Buttons to adjust the hour and minute for the alarm time Release the Alm Set Button to set the time Adjust the Auto Off On Button to Auto Adjust the AM FM CD Switch to the desired function for the alarm or reduce the Volume Dial to Buzz to wake to the unit s buzzer Listening to the Radio 1 2 Adjust the AM FM CD Button to AM or FM ST 3 4 Adjust the Auto Off On Button to the on position Turn the Tuning Dial to adjust the AM or FM radio station Turn the Volume Dial to adjust the volume of the radio Listening to a CD 1 Pull open the CD door load a CD into the unit with the label facing up Close the CD door Adjust the Auto Off On Button to the on position Adjust the AM FM CD Button to the CD position Press the Play Pause Button to begin playing a loaded CD Location of Controls REPEAT RANDOM CLK SET ALM SET de
6. e extensive work by a qualified technician to restore the product to its normal operation e If the product has been dropped or damaged in any way and f When the product exhibits a distinct change in performance this indicates a need for service Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards 23 Safety Check Upon completion of any 25 service or repairs to this product ask the service technician to perform safety checks to determine that the product is in proper operating condition Wall or Ceiling Mounting The product should be mounted to a wall or ceiling only as recommended by the manufacturer Heat The product should be situated away from heat sources such as radiators heat registers stoves or other products including amplifiers that produce heat Battery shall not be exposed to excessive heat such as sunshine fire or the like Main plug is used as disconnect device and it should remain readily operable during intended use In order to disconnect the apparatus from the mains completely the mains plug should be disconnected from the mains socket outlet completely Excessive sound pressure from earphones and headphones can cause hearing loss In
7. en the CD Player s lid is open and the system s interlock has failed or been defeated It is very important that you avoid direct exposure to the laser beam at all times Please do not attempt to defeat or bypass the safety switches CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT To reduce the risk of electric shock do not remove cover or back There are no user serviceable parts inside Please refer any servicing to qualified service personnel WARNING Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Do not mix old and new batteries Do not mix alkaline standard carbon zinc or dangerous voltage within the product s enclosure that rechargeable ni cad ni mh etc batteries NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipme
8. lt your product dealer or local power company For products intended to operate from battery power or other sources refer to the operating instruction Grounding or Polarization This product may be equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety 14 feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarizes plug Alternate Warnings This product is equipped with a three wire grounding type plug a plug having a third grounding pin This plug will only fit into a grounding type power outlet This is a safety feature If you are unable to insert the plug into the outlet contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the grounding type plug Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and point where they exit from the product Protective Attachment Plug The product is equipped with an attachment plug having overload protection This is a safety feature See Instruction Manual for replacement o
9. nt does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Important Safety Instructions L Read Instructions All the safety and operating instruction should be read before the product is operated Retain Instructions The safety and operating instruction should be retained for future reference Heed Warnings All warning on the product and in the operating instructions should be adhered to Follow instructions All operating and use instructions should be followed Cleaning Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Clean only with a dry cloth Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards Water and Moisture Do not use this product near water for example near a bath tub wash bowl kitchen sink or laundry tub in a wet basement or near a swimming pool and the like The apparatus shall not be exposed
10. other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal Overloading Do not overload wall outlets extension cords or integral convenience 21 receptacles as this can result in a risk of fire or electric shock Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the product Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel Damage Requiring Service Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the power supply cord or plug is damaged b If liquid has been spilled or objects have fallen into the product c If the product has been exposed to rain or water d If the product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often requir
11. r resetting of protective device If replacement of the plug is required be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug Outdoor Antenna Grounding If an outside antenna is connected to the receiver be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges Article 810 of the National Electrical Code ANSI NFPA 70 provides information with regard to proper grounding of the mast and supporting structure grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode See figure 16 Antenna Discharge Unit NEC Section 810 20 Grounding Conductors Z NEC Section 810 21 Ground Clamp Power Service Grounding Electrode System NEC Art 250 Part H Lightning For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the product due to lightning and power line surges Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or
12. to dripping or splashing and that no objects filled with liquids such as vases shall be placed on apparatus Accessories Do not place this product on an unstable cart stand tripod bracket or table The product may fall causing serious injury to a child or adult and serious damage to the product Use only with a cart stand tripod bracket or table recommended by the manufacturer or sold with the product Any mounting of the product should follow the manufacturer s instructions and should use a mounting accessory recommended by the manufacturer A product and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the appliance and cart combination to overturn See figure 10 1 12 a Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating and these openings must not be blocked or covered The openings should never be blocked by placing the product on a bed sofa rug or other similar surface This product should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instruction have been adhered to Power Sources This product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supply to your home consu
Download Pdf Manuals
Related Search