Home

Delphi NAV200 GPS Receiver User Manual

1. The current mode is indicated in the Current user mode field 4 Tap the Current user mode field to switch to the other user mode t Di 5 Top E soe o save the changes 24 Delphi NAV200 Note When you switch to Standard mode a dialog window will ask whether you want to keep the configuration changes made in extended mode This dialog window appears even if you have not made any configuration changes Tap Yes if you want to keep these changes The User mode screen will close and the Main Menu screen of the selected mode will appear Standard Mode The Standard mode Main Menu screen appears LELPHI i Navigation Favorites Recent destinations pr oC Settings The following functions are accessed from the Standard mode Main Menu screen and are explained fully in the pages that follow Tap the Navigation icon to enter a destination with no Navigation i stopover Tap the Home icon to navigate to your home address e L Ae Tap the Saved destinations icon to eE navigate to a favorite address Tap the Recent destinations icon to select Recent destinations G a destination entered previously L Tap the Map icon to show the current map WEJ Tap the Settings icon to modify the settings of Delphi Apa NAV200 a7 Tap the Exit icon to quit 25 Delphi NAV200 Extended Mode The Extended mode Main Menu screen appears LELPHI Navigation Route planning
2. The Info bar at the bottom of the map displays the altitude the compass and the current speed 3 Tap the command buttons to display On or not Off the respective information on the map The desired information on the entire route upper section and on the current stage lower section will be displayed at the right hand side of the map 4 Tap the respective command button to display On or not Off Points of Interest on the map 5 Tap the respective command button to display On or not Off Street names on the map 6 Via the arrow buttons select Route information STi Delphi NAV200 ETA at final dest ETA at Cancel 7 Tap the command buttons to display On or not Off the respective information on the map The desired information on the route upper section and on the current stage lower section will be displayed at the right hand side of the map 3 35 pm 00h50 35mi 3 00 pm oohis ilimi Route All information below refers to final destination aame oom ee All information below refers to the next route Estimated time of arrival ETA Estimated remaining time to arrival Estimated distance to destination Info Tap to repeat the last spoken instruction 58 Delphi NAV200 Configuring the Delphi NAV200 The Delphi NAV200 allows you to adjust what informational items are displayed on the screen These options are accessed through the Settings menu User mode M
3. 4 Tap Set as Route Point Next Destination Extended Mode Only Skip the next stopover The system recalculates your route to the next route point on the list Blocking a Route Section The Delphi NAV200 allows you to block out certain roads from being calculated into your routes if necessary to avoid known construction traffic backups etc Tap the iN option button Tap Block road The blocking screen appears Enter how far ahead you want to block the road CNT 4 Tap This forces a recalculation of the route A Roadblock ahead the route is being recalculated wena New The Embarcadero gt 771it _ Route The Embarcadero 26 E The blocked section of road will be highlighted in red on the map 61 Delphi NAV200 To unblock a blocked section of road briefly tap on the map and then tap Unblock Delphi NAV200 uses the route that had been originally calculated 62 Delphi NAV200 Section 9 Traffic Message Channel TMC Note This Function can only be activated after installation of external TMC antenna and software upgrade Traffic Message Channel TMC is a subscription service that provides navigation systems with traffic information broadcast by radio stations The Delphi NAV200 has an optional receiver that allows subscribers to receive up to the minute traffic information and allows you to adjust your route accordingly Check with www shopdelphi nav200 for additional informati
4. LELPHI City please select ae please select gt Intersection Tap the City entry field if you want to enter the destination city name or tap the ZIP entry field to enter a ZIP code 3 Tap the Street entry field and enter a street name 4 Tap the No field and enter the street address number if known Alternatively tap the Intersection entry field and enter a cross street You will be directed to this intersection Selecting a Point of Interest Points of Interest POI are stored in the Delphi NAV200 database and include ports airports restaurants hotels gas stations public buildings and more Note You can only select a POI nearby when the GPS receiver is turned on and a GPS signal is being received Point of Interest Nearby To select a POI nearby follow these steps F 1 Standard Mode In the Main Menu tap B Destination screen opens Navigation The LELPHI Region epee Address Point of interest i i oy nearby GPS position mala in a browsed cit ill Ind OFOWSeC CILY M neee Tap nearby GPS position 28 1 Extended Mode In the Main Menu tap The Destination screen opens LELPHI Region USA All states Tiy Address 4 Point of interest pza Ke Select on map Recent de z Favorites LELPHI Point of interest aN nearby GPS position nationwide Exi ii in a browsed city Tap nearby GPS position Delphi
5. NAV200 Navigation 29 Delphi NAV200 The POI Nearby screen appears LELPHI Radius imi Category oo ha ati ar ou AE Sr Naa i N iY er 2 Ap E gt Point of interest Tap the Radius entry field to select a radius around your current position where you want to search for points of interest 2 Tap the Category entry field optional to select a type of POI to search for Only POI within the indicated radius will be listed 3 Tap the Subcategory entry field optional to refine your search 4 Tap the Point of interest entry field to select a specific POI Point of Interest in a Certain City To select a POI nearby follow these steps Navigation 1 Standard Mode In the Main Menu tap i Destination screen opens The LELPHI Region iy Address Point of interest i ey _ nearby GPS position F ot in a browsed city Tap the State or Region or Province entry field and select the appropriate entry Then tap in a browsed city 30 Delphi NAV200 Navigation 1 Extended Mode In the Main Menu tap The Destination screen appears USA All states Diy Address i Point of interest Ta Select on map Recent de fF Favorites LELPHI Point of interest nearby GPS position nationwide in a browsed city Tap in a browsed city The POI in a city screen appears LELPHI City or ZIP please select Category pa j on T
6. be changed on the Route Options screen For detailed information on changing the standard settings refer also to Configuring The Delphi NAV200 51 Delphi NAV200 3 The system calculates the route and the map screen appears 1 7 Yan Ness Ave mi US 101S San Fran Your current position is indicated by a green arrow The calculated route is highlighted in orange Note When you start navigation after having planned or loaded an itinerary then your current position is the start point of the route The first indicated route point is then the first stopover on your route lf the Delphi NAV200 is not receiving a GPS signal the following message appears A GPS signal is not available now Navigation will start automatically when a GPS signal is available You have two options 1 Wait until a GPS signal is achieved 2 Tap to cancel and try again later 52 Delphi NAV200 Section 7 Working With the Map Selecting a Map The Delphi NAV200 allows you to insert SD cards containing additional maps If more than one map exists on the inserted card select which one you wish to use by following these steps ng 1 On the Main Screen tap the TE The Available Maps screen appears h 30_Alaska_MN5S_20060770_ Havaii_ DELPHI map PuertoRico_DELPHI map US4 CANADA Delphi map 2 Select the map you wish to use and tap loaded and the Main Screen appears The selected map is now O
7. be required to furnish a sales receipt proof of purchase indicating the date of purchase amount paid and place of purchase Customers who fail to provide such proof of purchase will be charged for the repair of any Product How state law relates to the warranty some states do not allow limitations on how long implied warranties last or the exclusion or the limitation of incidental or consequential damages 83 Delphi NAV200 So the above limitations or exclusions may not apply to you This warranty gives you specific legal rights You may also have other rights that may vary from state to state NO PERSON IS AUTHORIZED BY DELPHI TO MODIFY OR ADD TO THIS LIMITED WARRANTY 84 Delphi NAV200 DELPHI Product and Service Solutions Delphi Corporation 1441 West Long Lake Road Troy Michigan 48098 5090 U S A www delphi com 2006 Delphi Corporation All rights reserved 85
8. building or tunnel GPS may not be available Likewise signal reception can be affected by overhead cover such as trees Wireless devices may also interfere with signals causing variable reception e While the Delphi NAV200 can be operated by finger touch more precise control can be achieved by using the stylus Do not use other sharp objects which can damage the LCD screen e Never clean the Delphi NAV200 with the power on Use a soft lint free cloth moistened with water to wipe the screen and the exterior Do not use paper towels to clean the screen Do not place anything on top of the Delphi NAV200 Do not drop the Delphi NAV200 or subject it to severe shock Delphi NAV200 e Keep the Delphi NAV200 away from excessive moisture and extreme temperatures Do not subject the Delphi NAV200 to sudden and severe temperature changes that could cause condensation inside In the event of moisture condensation allow the Delphi NAV200 to dry out completely before use e Always disconnect the receiver from the power supply when leaving the car parked for a long period or when not using the system during travel Failure to do so could drain the vehicle s battery as the Delohi NAV200 continuously draws power even when the power is off A Warning Never attempt to disassemble repair or make any modification to the Delphi NAV200 Doing so could result in personal injury death and or damage to the Delphi NAV200 and or to your vehicle A Wa
9. drawing a rectangle on the map with the stylus beginning with the upper left corner Zoom out by beginning with the lower right corner Zoom bar Tap one of the bar sections to adjust the map scale Scroll Tap to enter scroll mode which enables you to scroll the map by tapping on the map and dragging it in any direction Tap again to disable scroll Entire Route Tap the Itinerary Icon to display the whole itinerary C L ow Might mode Interim destination Route options Next destination 3D Displays the map in 3D flight mode Tap return to 2D standard mode Delphi NAV200 North orientation Toggle this icon to switch between orienting the map north or in the driving direction Options Brings up the Additional Functions screen where a variety of adjustments can be made including Night mode Adjusts brightness of map screen Settings Displays the Settings screen Quit navigation Exit Navigation mode Block road Block or unblock a road Set interim destination Add a new route to your itinerary The route will be recalculated and the newly added route point will be the next destination Route options Modify route options Next destination Skip the next stopover The system recalculates your route to the next route point on the list 55 Delphi NAV200 Representation of the Map in Navigation Mode The following fields containing useful information are displayed in Navigation mod
10. ee 65 TUNING TMO eat deere tt erne ermal Rate bed eee 67 Section 10 Music Mode cccccceeeeeeeeneeeeeeeeeeneeeeneeeeneees 68 Playing an Audio File cccceeeeeeeeeeeeeeeeeeaeees 69 Section 11 Movie MOG orients oo iccecosssiidsetraeentmpessseacteeaswerees 72 PIAVING a Video FUG srania a a 73 SECHON 12 Pict r MOGG iiccacscerinacei asersietees estesteeitee etait 74 Viewing an Image File ccceeeceeeeeeeeeeseeeeees 19 Section 13 Game Mode wistccccscccicieesinctenscahasiaeieuseieetiessaneateusees 76 Section 14 Calculator Mode ccccsseeeeseeeeeeeeeeeeeeneeeeneees 77 Section 15 World Clock Mode cccccessceeeeceeeeeeeeneeeeneees 78 Section 16 Settings isiccisicndesicracsscucisecscsssecnicecsaderavaedsatsatiaeeiss 78 DOESN GOUINGS ar a a 78 Configure Settings cccccce cece eeeeeeeeeeeeeeeaeeees 79 Section 17 Troubleshooting cccccceeeeeeeeeeeeeneeeenneeeeneeeens 80 Contacting Technical Service Support 80 Technical Information gaheetadtevedmesceesceostsepetsdtoxena 81 POG SIgiCMenN EA es pecan 82 Section 19 Warlanily sissies stitches 83 Delphi NAV200 Section 1 About GPS NAV 200 Introduction The Global Positioning System GPS is a network of satellites launched by the U S military beginning in the1970s The satellites continuously transmit accurate time and position information which is freely used by commercial
11. i Point of interest a Tap the City or ZIP entry field to enter a location where you want to search 31 Delphi NAV200 2 Tap the Category entry field optional to select a type of POI to search for Only POI within the selected city will be listed 3 Tap the Subcategory entry field optional to refine your search 4 Tap the Point of interest entry field to select a specific POI Point of Interest Nationwide Extended Mode Only Navigation 1 In the Main Menu tap E The Destination screen appears DELPHI Region LISA All states Diy Address n Point of interest Faa Ks Select on map Recent de fF Favorites Tap Point of interest to view the Point of Interest screen LELPHI Point of interest o fle an a A nearby GPS position nationwide 4 rili in a browsed city Tap nationwide 32 Delphi NAV200 2 The POI Nationwide screen appears LELPHI Category o pa aM m YW Bor is Point of interest 3 Tap the Category entry field optional to select a type of POI to search for 4 Tap the Point of interest entry field to select a specific POI 33 Delphi NAV200 Selecting Destinations on the Map Extended Mode Only The Delphi NAV200 allows you to indicate a destination directly on the map In addition to selecting cities and streets you may also select points of interest quickly To select a destination on the map follow these steps Navigatio
12. CK SETTINGS NAVI Starts up navigation functions MUSIC Starts the music playback function that enables playing mp3 and wav files MOVIE Starts the movie Playback function that enables playing avi files PICTURE Starts the picture function that enables viewing jpg gif and png files SETTINGS Starts the screen environment setting function W CLOCK Starts the world time function that enables viewing the time in different cities CALC Starts the calculator function GAME Starts the game function At any time you can return to this menu by pushing the Main Menu button or by closing the current mode accomplished by tapping the x in the upper right corner of the screen 16 Delphi NAV200 Section6 Navigation Mode A Warning For your safety program the Delphi NAV200 and enter information about your destination BEFORE you start your journey Do not operate Delphi NAV200 while driving Park the vehicle first DELPHI DISCLAIMS ALL LIABILITY FOR ANY USE OF THIS PRODUCT IN A WAY THAT MAY CAUSE ACCIDENTS DAMAGE OR THAT MAY VIOLATE THE LAW Driver Protection The driver must not operate this unit while the vehicle is moving When the Delphi NAV200 is powered on a protection screen is displayed Delphi N amp V200 in a ole responsibility to install ice in amanner that persona injury or I dedine I accept I decline I accept Settings Quit Settings Quit I decline I accept I decline
13. Delphi NAV200 while driving Powering Up Power on Press the Power button located on the lower left side for at least one second Power off Press the Power button located on the lower left side for at least one second Note The Delphi NAV200 will continue to charge if connected to a 12V power jack even when powered down Enter screen saving mode Press Screen Saver Mode button The device continues to operate but the screen will appear blank Delphi NAV200 Inserting a SD Card Delphi NAV200 has a slot for Secure Digital SD cards located in the bottom Delphi NAV200 will accept SD cards containing digital maps or other data such as audio mp3 files movie avi files or image jpg files The Delphi NAV200 comes equipped with an SD card preloaded with USA and Canada maps The card will already be in position in the SD card slot and ready to use for navigation lf you choose to use a second SD card separate purchase required for music movie or picture viewing remove the navigation system SD card by slightly pushing the top of the card to release it then pull it out of the slot Make sure the card is not in use before removing it Power off the unit insert the new SD card with the label facing the front of the device and power the unit on 15 Delphi NAV200 Home Screen The main menu offers eight options each of which are detailed in the sections that follow Oo NAVI MUSIC O EE 6 6 W2GLO
14. GPS Antenna 2 Using the two tabs on the bottom of the cradle locate the Delphi NAV200 and rotate rearward While pushing in the two grey release buttons continue rotation until unit is firmly seated in the cradle 3 Release the two grey buttons Reverse operation for unit removal 4 Position suction cup firmly against windshield at desired location 5 Flip the lever towards suction cup Unit is now secure for operation To remove the suction cup pull the lever up Pull the release tab to release the suction 11 Delphi NAV200 lf the suction cup does not adhere clean the mounting area of the windshield with a cloth dampened with isopropyl alcohol Let the area dry then reapply the suction cup Delphi NAV200 Section 4 Features and Controls A Warning For your safety program the Delphi NAV200 and enter information about your destination BEFORE you start your journey Do not operate Delphi NAV200 while driving NAV200 Receiver Controls 1 Power ON OFF 5 Flip Up Antenna 9 TMC Input Jack 2 Main Menu Button 6 Screen Saver Mode 10 Touch Screen Stylus 3 Zoom in 7 SD Slot 11 Headphone Jack 4 Zoom out 8 DC IN Power Connection 12 Volume Control Delphi NAV200 Section 5 Getting Started A Warning For your safety program the Delphi NAV200 and enter information about your destination BEFORE you start your journey Do not operate
15. I accept Settings Quit Settings Quit accept must be selected to continue Selecting decline causes the program to terminate 17 Delphi NAV200 Using the Keyboard The Delphi NAV200 lets you enter addressee information with the character keyboard Character Keyboard LELPHI ABER ABERCROMBIE 58075 North Dakota ABERDEEN 98520 ABERDEEN 57401 OE SEEE K S J R Z I Q Y Use your finger or the stylus to enter letters by tapping the appropriate letter All letters are upper case in the Delphi NAV200 Tap the icon to enter a space Tap the icon to delete the previous character Tap the icon to enter numbers e g when entering a ZIP code Tap the oe icon to return to character entry mode Tap the Sym icon to enter a special character The special characters keyboard appears Delphi NAV200 LELPHI lt please enter City gt m Be As soon as you have entered a special character the standard letter keyboard reappears Note It is not necessary to enter special characters but it may be helpful in entering names for saved destinations and itineraries Note You can also move the cursor anywhere on the screen by simply tapping on the place where you want it Delphi NAV200 Command Buttons The following buttons appear at the bottom of every navigation screen not available on the Main Screen Main Screen Tap this icon to open the Main Screen In
16. IWCLrPrii 1300 ft PORTABLE GPS NAVIGATION Sleeper St Congress St DI ee oe DELPHI NAV200 PORTABLE GPS NAVIGATION OWNER S MANUAL directed by NAVIGON A IMPORTANT This manual and the Delphi NAV200 Portable GPS Navigation Quick Start Guide contain important safety and operating information Please read and follow the instructions in these manuals Failure to do so could result in personal injury death and or damage to your Delphi NAV200 and or to your vehicle Delphi NAV200 Welcome Thank you for purchasing the Delphi NAV200 Portable GPS Navigation System This system will direct you to virtually any destination without the need for map books or second hand instructions The Global Positioning System GPS Is available free of charge at any time and is accurate within 16 5 feet The maps in the Delphi NAV200 package provide street level detail allowing door to door navigation They even include points of interest such as hotels parks and airports In addition the Delphi NAV200 can play audio mp3 or wav files and video avi files as well as display pictures jpg gif png enhancing the entertainment options in your vehicle Delphi NAV200 features e 400 MHz CPU for fast navigation calculations and map rendering e Bright colorful non reflective touch screen LCD display XN I e Fast start high speed GPS with high gain antenna Easy to use Software base
17. VD Containing User manual in Adobe Acrobat PDF format Adobe Acrobat Reader software Copy of United States and Canada map files that can be preloaded to an SD card if original becomes lost or damaged e Customer Service Card Your Direct Line to Delphi for NAV200 Support NAV200 Delphi NAV200 Memory Cards The Delphi NAV200 has 32 megabytes of internal memory available for the operational system Microsoft Wince Net Core version 4 2 SD secure digital Memory cards are available for purchase and should be used to store other media files such as video avi images jpg gif png and or audio mp3 wav files An SD card can be plugged into the slot in the Delphi NAV200 and can be purchased with various memory capacities An SD card with 256 megabytes of memory or more can be used in the Delphi NAV200 Delphi recommends the use of following SD card brands Kingston Kingmax Transcend and SanDisk A Caution Do Not ADD or DELETE files from the SD card containing the map data Accessories and Replacement Parts You will be able to purchase the following items from the Delphi Website e External GPS antenna 15 foot cable with MMCX connector required if your vehicle is fitted with a heat reflective or heated windshield or for extra GPS performance in weak signal areas e External Traffic Message Channel adaptor not yet available e SD card reader an external device that connects to your computer so th
18. VIOLATE THE LAW The Delphi NAV200 can playback video files saved in avi format on an SD card Adding movies requires a higher capacity SD card not included and the ability to download avi files from a computer An SD card reader may be required if your computer is not equipped with an SD card slot When entering Movie mode the most recent file played is automatically and is listed in the control bar at the top of the screen along with playtime Successive files are played automatically in order Repeat Time Played Total Time Current Status File in Play Selecting a play interval If a file is damaged a popup message will appear stating Cannot play this file and play will stop 12 Delphi NAV200 Playing a Video File At any time tapping on the video portion of the screen will alternate between full screen mode and menu mode Menu options on the control bar include edian Review Tap to rewind file button turns red and file rewinds in 10 second increments Tap again to resume play at current location Note Tapping Review and Play Pause in rapid succession will begin play from the beginning of the file Play Pause Tap to begin play tap again to pause Tapping while in pause resumes play from current location Note Tapping anywhere on the video screen will also begin play Fast forward Tap to fast forward file button turns red and file advances in 10 second increments Tap play to resume play
19. addition you will see one of three GPS symbols in the upper right corner No GPS A GPS receiver is not connected or the power supply is A 4 Back Tap this icon to return to the previous screen This icon is interrupted T No Signal A GPS receiver is connected but no signal is being EA received GPS Ready Signal received 7 pae hy Tapping the icon displays the current GPS status screen al a 20 Delphi NAV200 GPS status GMT 00 00 00 00 01 30 Longitude 122 29 04 W Satellites 8 Latitude 37 50 08 N HDOP 1 1 Altitude 774 ft Speed 22 mph Current positon Sausalito Lateral Rd Sausalito United States T Save current position Close window GMT Greenwich Mean Time Longitude Latitude Current position Satellites Number of received satellites at least three satellites must be received for navigation HDOP Horizontal Dilution of Precision Indicates the quality of position determination Theoretically any value from 1 to 50 may occur The smaller the value the more accurate the position determination A 1 indicates no deviation from the real position Values up to 8 are acceptable for navigation Speed Your current speed Position Your current location Tap Save current position to add the current address to your Favorites Tap Close window to exit There are three types of command buttons in the Delphi NAV200 1 Command buttons with a defined functionality The
20. an SD card slot When entering Picture mode the last file viewed is highlighted in the control bar along with the number of files in the index File Name Picture Yiewer Current File Index T otal Number of Files Read SAMPLE BMP 74 Delphi NAV200 Viewing an Image File Menu options on the control bar include Previous Views the previous image Next Views the next image Note lf a file is damaged Delphi NAV200 automatically skips to the next available image Full size Expands the image to full screen Note Tapping on the image also alternates between full screen view and control bar view Picture Yiewer SAMPLE BMP Press an image gt gt Press the screen P 4 i wai T tH f igs i 4 q vr uu y List If multiple files are available they are displayed on the Picture list screen The file currently being shown is highlighted This screen allows you to scroll through your list of files Press View to view the highlighted file or tap Cancel to return to the previous screen Picture View List RESET_03 PNG SAMPLE BMP ScreenScroll PNG background PNG gt VIEW X CANCEL Enlarge reduce Pressing the buttons on Delphi NAV200 while in Full screen Picture mode will enlarge or reduce the image size two times or four times Use the stylus to tap on the red arrows to move the image across the screen 19 Delphi NAV200 Section 13 Game Mode A Warning For yo
21. and military applications worldwide GPS receivers such as Delphi NAV200 are designed to pick up the high frequency radio signals from these satellites and use the information to help determine your exact location Today there are many applications that use GPS from marine to automotive aviation and military There are 24 satellites in total orbiting approximately 12 000 miles above the Earth While a GPS receiver can detect signals from up to 12 satellites at any one time only three are needed to provide the two dimensional position latitude and longitude or fix that is required for vehicle and marine navigation systems Aviation applications also need altitude and therefore need information from at least four satellites The Delphi NAV200 is designed specifically to use the continuous stream of GPS information to help find your current position and to calculate the best route to your desired destination using the road maps stored in its memory With voice and visual commands the Delphi NAV200 helps guide you to your destination For best results when using Delphi NAV200 e When the Delphi NAV200 is connected to power for the first time leave it connected for about two hours to charge the battery e Plan your route before your journey If you need to set up a new itinerary en route safely park your vehicle before making changes e GPS signals cannot pass through solid materials other than glass So when you are inside a
22. anty period set forth above This warranty is not transferable and applies only to the original consumer purchaser of the Product Delphi will as its sole obligation under this warranty replace or repair at its option any Product that does not conform to this warranty Under no circumstances will Delphi be liable for any incidental or consequential damages under this warranty or any implied warranties Delphi will not be responsible for damage resulting from any i deviation from Delphi s operating instructions as printed in Delphi s catalog or on any packaging labels or other literature provided with a Product il installation of a Product in a manner which is inconsistent with Delphi s written instructions ili alteration or modification of a Product iv misuse v neglect vi abuse vil accident viil normal wear and tear ix commercial use x service by anyone other than a Delphi authorized repair facility or xi other improper application installation or operation of the Product How you the Customer can get service To obtain warranty service during the first thirty 80 days after the date of purchase you must return the defective Product with the original receipt to the original place of purchase To obtain warranty service during the remainder of the warranty period you must contact Delphi by phone at 1 877 667 8700 If warranty service is needed at any time during the warranty period the purchaser will
23. ap information Route information Sign information Speed lirit Whenever a change is made to any of these options tap to save the modifications Routing options Adjust preferred travel options LELPHI Speed profile Type of routing Interstates Ferries Tollways l a Start navigation Time zone Change current time zone Format Change time from 12 to 24 hour clock change distance from miles to kilometers Home address Enter or edit your home address User mode Standard or Extended Map Information Turn ON or OFF the info bar Points of Interest or street names Route Information Turn ON or OFF select features Representation Adjust brightness level 59 Delphi NAV200 Auto Mode Adjust view for 2D or 3D preferences Itinerary Turn ON or OFF proceeding automatically to next destination Hands free Options Turn ON or OFF connection to radio auto mute Product Information Display of product information only 60 Delphi NAV200 Section 8 Useful Functions for Navigation Adding a Route Point During Navigation Extended Mode Only The Delphi NAV200 allows you to add a new route point to your itinerary at any time Your route will be recalculated in order to make the new route point the next destination 1 In Navigation mode tap briefly anywhere on the map 2 Tap Set interim destination The Destination screen appears 3 Set the new route point as described in Selecting a Destination
24. at current location List If multiple files are available they are displayed on the Movie play list screen The file currently being played is highlighted This screen allows you to scroll through your list of audio files Press Play to play the highlighted file or tap Cancel to return to the previous screen Current Status File in Play Movie Play List 1 43 Focussed File Index Total number of files read PF GUNDAM SEED DVDrip 02 avi Page Up P GUNDAM SEED DVDrip 01 avi B Down Cancel Back to the previous Play Play in full screen as in the Pigure 3 Mute Mutes all volume Press again to turn sound on again Note Mute button is located in upper left corner of movie display screen 13 Delphi NAV200 Section 12 Picture Mode A Warning For your safety DO NOT operate the Delphi NAV200 entertainment features while driving Movie and music MP3 playing picture viewing world clock and calculator are intended for use while you are not driving your vehicle DELPHI DISCLAIMS ALL LIABILITY FOR ANY USE OF THIS PRODUCT IN A WAY THAT MAY CAUSE ACCIDENTS DAMAGE OR THAT MAY VIOLATE THE LAW The Delphi NAV200 allows you to view images saved in gif jog or png format on an SD card on the display screen Adding pictures requires a higher capacity SD card not included and the ability to download gif jog or png files from a computer An SD card reader may be required if your computer is not equipped with
25. at you can download maps audio files movie files and photos directly onto an SD memory card e Vehicle mount kit includes suction mount so you can transfer the Delphi NAV200 to another vehicle easily e Protective carrying case e 12 V vehicle power adapter ideal when using Delphi NAV200 in more than one vehicle e Updated maps e Motorcycle mount holder For further information on replacement parts and accessories visit www nav200 delphi com Delphi NAV200 Section 3 Installing Delphi NAV200 in Your Vehicle A Warning To avoid personal injury follow the safety guidelines and installation instructions provided so that the Delphi NAV200 does not obstruct the view of the driver interfere with the operation of any airbags and safety features in the vehicle or become airborne in the case of an accident Do not attempt to install Delphi NAV200 while driving Before installing the Delphi NAV200 check whether your vehicle is fitted with a heat reflecting or heated windshield If so you will need to purchase an external antenna from your retailer to allow your unit to pick up the GPS signals Note Alternative mounting options may be available for your vehicle make and model Contact your retailer or Delphi for more information Note In the state of California and Minnesota it is necessary to use the dashboard mount according to state law To mount the suction mount to the windshield follow these steps 1 Flip up the
26. d on Microsoft Windows CE e Navigation map files information pre installed on SD memory card included Use this manual to help install Delphi NAV200 in your vehicle learn how to operate it effectively and safely and find out about the different features Contacting Technical Service Support For additional information in solving problems with Delphi NAV200 contact Delphi at 1 877 667 8700 Monday Friday 8 00 am 8 00 pm Saturday 10 00 am 5 00 pm and Sundays 10 00 am 4 00pm Eastern Standard Time or visit www nav200 delphi com A This is the safety alert symbol It is used to alert you to potential injury hazards Obey all safety messages that follow this symbol to avoid possible injury or death Delphi NAV200 A Warning DANGER OF ACCIDENT When using your Delphi NAV200 in a vehicle it is your sole responsibility to install secure and use the device in a manner that will not cause accidents personal injury or property damage or in any manner obstruct your view or interfere with the operation of vehicle safety equipment The user of this product is solely responsible for observing safe driving practices Do not operate your Delphi NAV200 while driving Park the vehicle first Do not use the navigation system or entertainment features if it presents a risk to you or any other person or if it is a distraction OBEY ALL TRAFFIC LAWS The user is solely responsible for obeying the local traffic laws and obs
27. e l Deawarest MG Field 1 If there are two turns coming quickly after each other the small upper arrow field indicates the second upcoming turn Field 2 The green arrow indicates your current position on the map Since the displayed sector changes continually your position is centered Exception Frozen map mode Field 3 The larger arrow indicates the next turn Field 4 The distance field indicates the distance to the next turn As you approach the number changes to a distance bar As more yellow bars are displayed the closer you are to the turn Field 5 The upper bar indicates the next street where you should turn Field 6 The lower bar indicates the name of the current street where you are driving Other useful information can include A Warning Information contained in the cartographic material can be incorrect depending on current conditions roadwork etc Obey all current applicable traffic laws 56 Delphi NAV200 Displaying Additional Information on the Map The Delphi NAV200 allows you to determine which information is to be displayed on the map Modifying any configuration begins on the Settings screen 1 Open the Settings screen by tapping the Settings button on the Main screen or by tapping the Additional Functions bution or short into the map and selecting Settings 2 Select Map information using the arrow buttons Info bar Points of interest Street names 2D t aye
28. e Rd 3 SAN FERNANDO LA CASA DE G Total trip 79mi Time 01 h 21 min a a ai g u tH ze Zz Start navigation Displaying the Route on the Map On the Route Planning screen tap the on the map The Map screen opens Mo a nm Toy Lf fs H ee a US 101 Lombard St 22 mph The route is highlighted in orange The route points are marked by flags 49 Delphi NAV200 Simulating the Route The Delphi NAV200 allows you to execute a simulated navigation along the itinerary when the route has been calculated Ta 1 On the Route Planning screen tap the icon The Map screen opens i 771ft 22 mph options icon The Additional Functions screen appears Close window fi Night mode a P ve Settings BT Close map i Tap Simulation The route will be recalculated for simulation purposes 50 Delphi NAV200 Calculate route to 25472 Village Dana Point 92629 California To stop the simulation at any time tap the The Additional Functions screen opens Tap Wiii Starting Navigation in Extended Mode 1 Once a destination has been selected tap Mi ji The Route Options screen appears DELPHI Speed profile Type of routing Interstates Ferries Tollways a Start navigation 2 Set the route options For detailed information on setting route options see Configuring The Delphi NAV200 Note The standard settings for the route options may
29. e zone Settings e Screen Set Contig Set Popup Sound Doorbell Button Sound xylophone Auto Booting GPS Reset Tap Save to save your settings 19 Delphi NAV200 Section 17 Troubleshooting The Delphi NAV200 unit is designed and built to provide trouble free performance If it does not appear to be functioning properly please follow these troubleshooting guidelines No GPS fix 1 Check the satellite icon in the upper right corner of the map view screen 2 Make sure the antenna on the unit is pointed outward and upward providing a clear view of the sky 3 Ensure that the vehicle does not have a heat reflecting or heated windshield These cut out GPS signals An external antenna can be purchased from your retailer to help ensure adequate GPS signal reception 4 The first time you use Delphi NAV200 it may take several minutes to get the first GPS fix The unit self calibrates and locates the satellites The information it discovers this time is stored in memory so from that point on it should take less than 40 minutes to get a fix If you travel overseas the unit can take up to 20 minutes to acquire a first fix GPS randomly loses its fix Many factors can affect GPS reception It is best to be outdoors with a clear view of the sky The GPS receiver continues to search for a signal and automatically recalculates the route once the reception is restored No audible destination in
30. en E ES rapid 16 Section 6 Navigati n eic di 17 DrIVErPTOLGCION sisari asrori noo EAr 17 Using the Keyboard ccccceeceeeeceeeeseeeneeeeaes 18 Character Keyboard senmisin n 18 Command BUNGNS sirinmessomisarsr daaraan e NR 20 ING TS EPE E ARE E A E A pate E 22 Adjusting the Volume cece cece cece eeaeeeeaeeeees 22 Initializing Delphi NAV200 cece ecee eee ence eee 23 Selecting User Mode cccccceseeeeeeeeeeeeaeeees 23 Standar MOJE sccctotdredeaveemecdtinnaeneneneatieaetetbe ied 25 Extended MOOG se 0 cnsuse erataniddaraceaueiald ee meatene 26 Selecting a Destination c cece ese a 27 Entering an Address sevess etonternneeatents anacesadensieie 27 Selecting a Point of Interest cccce cece e eee 28 Point of Interest Nearby ccee cece ee eee 28 Point of Interest in a Certain City 30 Point of Interest Nationwide _ 600 32 selecting Destinations on the Map _ 605 34 FAVOS ceina NNE E 36 Recent Destinations sicicisesvncdierdiendiacituseeiedvadins 38 Using Your Home Address eeceeeeeeeeene ees 39 Destination Management cccceeceeeeeeeeeeeees 40 Saving a DeStiNAatiON c ccc cece eee eeeee cease eaeees 40 Renaming a Destination cccccceeeeeeeeeeeeeeees 40 Deleting a Destination cc cece ee eceeeeeeeee ees 41 Route Planning It
31. erence to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an output on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced electronics technician for help e A shielded cable must be used when connecting a peripheral to the serial ports e Modifications not expressly approved by the manufacturer could void the user s authority to operate the equipment under FCC rules 82 Delphi NAV200 Section 18 Warranty Delphi Product amp Service Solutions Delphi warrants all Delphi NAV200 systems sold by Delphi Products to be free of defects in material and workmanship subject to the following conditions The duration of Delphi s warranty with respect to the Delphi NAV200 is limited to one 1 year from the date of sale to the original consumer purchaser No other express warranties are made with respect to any Product All implied warranties including warranties of merchantability and fitness for a particular purpose are limited to the warr
32. erving all road signs Local traffic laws and actual traffic signs always have priority over the information and directions received from the navigation system The navigation instructions might be inaccurate or incorrect due to detours and construction DELPHI DISCLAIMS ALL LIABILITY FOR ANY USE OF THIS PRODUCT IN A WAY THAT MAY CAUSE ACCIDENTS DAMAGE OR THAT MAY VIOLATE THE LAW Caution To avoid overheating of the unit do not leave Delphi NAV200 on the dash or windshield while your vehicle is unattended especially in strong sunlight Do not use or handle Delphi NAV200 while it is hot Let it cool away from heat sources before handling it Microsoft and Windows are trademarks of Microsoft Corporation Delphi NAV200 Table of Contents Section 1 About GPS Introduction ccccceeceeeeeeeeeeeneeenes 6 Section 2 Unpacking Delphi NAV200 ccceesseeeeeeeneeeeees 8 Memory Cards cstetcaesaugatestouiecusssbiadeeonasdadess wan 10 Accessories and Replacement Parts 005 10 Section 3 Installing NAV200 in Your Vehicle 00 0008 11 Section 4 Features and Controls ccccseeeseeeneeeeeeeneeeneeens 13 Delphi NAV200 Receiver Controls 005 13 Section 5 GOING Stalte ca stir sieeies a erecee es 14 POWEnnNO WUD eriten Sst racecar ashe eneeta E enw arate dnbos 14 Inserting a SD Card 2 0 ccc cece cece ence eeeaeeeaeees 15 PIO MO SCC CN autores tuted
33. ged Delphi NAV200 automatically skips to the next available file List Displays the play list screen The file currently being played is highlighted This screen allows you to scroll through your list of audio files or arrange them randomly or alphabetically Press Play to play the highlighted file or tap Cancel to return to the previous screen File index where the focus is located Total number of files read ABCD MP3 T ABCDE MPS Music Play List 1 13 Press this button for a while to move the focus slowly ABCDEF MP3 line by line Press and hold this button to move the focus quickly line by line ABCDEFG MP3 gt PLAY A CANCEL The index of a file where the focus The index of a file where the focus is located in random order is located in alphabetical order Music Play List 1 13 Music Play List 12 7 13 ABCD MP3 PhoneBell WAY T The Random tT ABCDE MP3 button is pressed SAMPLE MP3 et ABCDEF MP3 xulophone WAY ABCDEFG MP3 4 Arrows WD WAY 4 gt PLAY x CANCEL gt PLAY A CANCEL Random Alphabetical Order 71 Delphi NAV200 Section 11 Movie Mode A Warning For your safety DO NOT operate the Delphi NAV200 entertainment features while driving Movie and music MP3 playing picture viewing world clock and calculator are intended for use while you are not driving your vehicle DELPHI DISCLAIMS ALL LIABILITY FOR ANY USE OF THIS PRODUCT IN A WAY THAT MAY CAUSE ACCIDENTS DAMAGE OR THAT MAY
34. gnal is being received so you can get an impression of the route Note When you start navigation the system identifies your current location and makes it the start point The first indicated route point becomes your first stopover 1 On the Route Planning screen tap the icon to calculate the distance and the estimated duration of the route The Route Options screen opens DELPHI Speed profile Type of routing Interstates Ferries Tollways a Calculate route 2 Set the route options For detailed information on setting route options see Configuring The Delphi NAV200 Note The standard settings for the route options may be changed on the Route Options screen For detailed information on changing the standard settings refer also to Configuring The Delphi NAV200 3 Tap Calculate route The route is being calculated A message window informs you of the progress of the calculation Calculate route from 4300 Dana Dana Point 927629 to 25472 Village Dana Point 97629 Section 1 of itinerary Tatal 48 Delphi NAV200 When the route is calculated the total distance and the estimated time from the first to the last route point are displayed below the route points list of the Route Planning screen The distance and estimated time of each stage will also be indicated with the selected route point entry LELPHI 24300 Dana 1 Dana Point 92629 California 2 DANA POINT 25472 villag
35. ie lf you have opened the Recent Destinations list tap the icon to edit 2 The Name of Destination screen appears Enter a name for the destination 3 Tap The destination has now been added to Favorites Renaming a Destination iz Favorites 1 On the Destination screen tap The Favorites screen appears 40 Delphi NAV200 PAUL HUAHTERSVILLE 28078 194 Gibson Park Dr ROBERTA TOM 2 Select the destination you want to rename 3 Tap the icon to edit The Name of Destination screen appears 4 Enter the new name 5 Tap The destination has now been renamed Deleting a Destination The Delphi NAV200 allows you to delete a destination from either the Favorites or Recent Destinations list by following these steps 1 Select the entry to be deleted 2 Tap the icon to delete The confirm screen appears 41 Delphi NAV200 PAUL HUNT 194 G sre you sure that you want to delete ROBER PAWL TOM A I O R 5S T U V W X k E 123 Sym Tap v The destination has now been deleted Route Planning Itineraries with Stopovers Extended Mode Only The Delphi NAV200 allows you to plan itineraries even when not receiving a GPS signal These itineraries can then be stored for later use 42 Indicating Route Points Route planning 1 On the Main Menu tap screen appears The Route Planning Total trip Unknown 2 Tap the ME icon to enter the first r
36. inerarieS cccee eee e cece eee 42 Indicating Route Points ccccceeeeeeeeeaeeeeees 42 Editing Saving and Managing Itineraries 44 Calculating the Route cc cece cece a 48 Displaying the Route on the Map _ 6 00 49 Delphi NAV200 Simulating the Route cece ccc e cece eee e eee e eas 50 Starting Navigation in Extended Mode 51 Section 7 Working With the Map ccccceeseeeeseeeeeeeneeeneees 53 Selecing AWAD e cerausstesic cesar euteaee 53 Operating the Map cccceee cece eeeeeeeeeeeeaaes 53 Representation of the Map in Navigation Mode 56 Displaying Additional Information on the Map _ 57 Configuring Delphi NAV200 ou eee eee cece cence ence ees 59 Section 8 Useful Functions for Navigation c0csseeesseee 61 Adding a Route Point During Navigation 61 NEQATDESTINAUON ssri eor AA 61 Blocking a Route Section c ccc cece cence nena eee 61 Section 9 Traffic Message Channel TMC ceeeeeeeees 63 Must have external TMC antenna optional accessory and software upgrade For further information please contact Delphi Customer Service Initializing the TMC Receiver and TMC Status _ 63 SIO ENG states bce seein oat tegen O 64 TMC Traffic Information Symbols _ 08 65 Factoring TMC Into Navigation _ eeee
37. inerary Your route will be recalculated immediately Interim destination Favorites x All destinations you have saved by tapping the icon are listed on the Favorites screen On this screen you can select destinations for navigation rename destinations and delete destinations To use Favorites follow these steps 1 Standard Mode In the Main Menu tap Saved destinations Navigation 1 Extended Mode In the Main Menu tap B The Destination screen appears DELPHI Region USA All states iy Address ve Point of interest pza ge Select on map ral Recent de fF Favorites 36 Delphi NAV200 2 The Favorites screen appears PAUL HUNTERSVILLE 28078 194 Gibson Park Dr ROBERTA TOM A I Q Y Tap on your choice to highlight it then tap 3 The Address screen appears Select from the following options Start navigation to your selected destination Start navigation Caution Using this function while you are already navigating deletes all current destinations including stopovers View the selection on the map Save the destination in Saved Destinations 37 Delphi NAV200 Recent Destinations The Delphi NAV200 remembers recently selected destinations On this screen you can select destinations for navigation add destinations to Favorites and delete destinations To use Recent Destinations follow these steps fe Recent destinations 1 S
38. ing to a destination messages that affect your current route will be listed first i 3 Tap the Micka icon to show current traffic data on the map Note Icon is not shown if there are no traffic messages US 101 5 San Francisco 64 Delphi NAV200 i 4 Tap the icon to update and display new traffic information 5 Tap to close the TMC screen TMC Traffic Information Symbols Traffic information on the map is represented by the following symbols D Traffic jam Accident Narrowed road Roadwork amp S ai Road closure Blocked exit General warning about traffic obstructions Storms strong winds Snowy or icy conditions Flooding Additional information sports events parking etc Factoring TMC Into Navigation You can configure the Delphi NAV200 to take TMC information into account when calculating a route by using the Settings feature lf you have configured automatic modification the following message appears while the system recalculates your route 65 Delphi NAV200 The route is being recalculated due to traffic information update lt gt SOUTHBOUND lf you have configured TMC with confirmation the following screen will inform you of a reported obstacle on your route Traffic message affects itinerary California I 5 SOUTHBOUND I 210 Slow traffic Ignore Recommendation Ignore Tap the Evade icon to recalculate your r
39. intended for use while you are not driving your vehicle DELPHI DISCLAIMS ALL LIABILITY FOR ANY USE OF THIS PRODUCT IN A WAY THAT MAY CAUSE ACCIDENTS DAMAGE OR THAT MAY VIOLATE THE LAW The Delphi NAV200 can playback audio files saved in mp3 and wav format on an SD card Adding music movies or pictures requires a higher capacity SD card not included and the ability to download MP3 files from a computer An SD card reader may be required if your computer is not equipped with an SD card slot When entering Music mode the last file played is highlighted as current If the last music file does not exist on the SD card currently installed the first file available on the current card is listed Current Status Time Played Total Time Repeat 1 13 vylophone ee Previous Music Current Music If the name of the music file does not ABCDE MP3 appear completely in one line the file name flows from right to left Next Music 68 Delphi NAV200 Playing an Audio File Audio functions are controlled by tapping on the various buttons located on the control bar in the lower half of the screen Play Pressing the Play button plays the file listed at Current Music The screen will display current playback time and playback status If a file is damaged the next file will be played without opening a popup screen xylophone WAY ABCDE MPS lf all files are damaged a popup screen opens and all audio playback sto
40. irst power on the unit and program a route it may take several minutes for the unit to get its first GPS fix You can minimize this time by remaining stationary until the GPS signal is received The initialization process of the Delphi NAV200 starts automatically when entering Navigation mode Within 15 seconds the GPS icon should switch from to Then as soon as the signals of at least three satellites are being received the icon will switch to This procedure may take up to 20 minutes on the first initialization Note This initialization process must be carried out only once After that the receiver will be ready in about a minute A new initialization may be necessary if the device is not used for a long time In this case it should take only about 10 minutes Selecting User Mode The Delphi NAV200 can be operated in two different user modes for navigation 1 Standard Standard mode is recommended for most users 2 Extended Extended mode offers additional features that enhance the functionality of Delphi NAV200 23 Delphi NAV200 To change the mode follow these steps 1 Inthe Main Menu tap Settings The Settings screen appears User mode Map information Route information Sign information Speed lirit ath 2 The User mode entry should be at the top of the list If not tap the a icon until it is selected 3 Tap The User mode screen appears Factory settings i f Save Cancel
41. ka Show map PT Settings The following functions are accessed from the Extended mode Main Menu screen and are explained fully in the pages that follow Tap the Navigation icon to enter a destination with no stopover Navigation Tap the Home icon to navigate to your home address Tap the Route planning icon to plan a Route planning route Tap the Show map icon to display the map currently in use ng Tap the Change Map icon to select another map from the SD Map card Tap the Settings icon to modify the settings of Delphi NAV200 Tap the Exit icon to quit Quit Ta Show map 26 Delphi NAV200 Selecting a Destination Entering an Address To enter an address follow these steps Navigation 1 Standard Mode In the Main Menu tap The Destination screen appears LELPHI Region iiy Address Point of interest A ey nearby GPS position IT in a browsed city Whee i Tap the State or Region or Province entry field and select the appropriate entry 1 Extended Mode In the Main Menu tap E Destination screen appears Navigation The US4 All states iy Address sn Point of interest pa ee Select on map Recent de fF Favorites Tap the State or Region or Province entry field and select the appropriate entry 2 On the Destination screen tap Enter Address The Address screen appears 2 Delphi NAV200
42. n 1 In the Main Menu tap opens The Destination screen LELPHI Region LISA All states Sel Address 4 Point of interest E Ks Select on map Recent de z Favorites Tap the State or Region or Province entry field and select the appropriate entry 2 Tap Select on map The Map screen appears 3 Tap on the desired destination location and hold An orange circle appears around your selection 34 Delphi NAV200 22 mph The Delphi NAV200 then displays information about your selection along with several options Close window SAUSALITO CHAMBER OF COMMERCE Sausalito 94965 California J a Start navigation Save EA Search nearby i Add to route Select from the following options Za Start navigation to your selected destination Start navigation Caution Using this function while you are already navigating deletes all current destinations including stopovers Save the destination in Saved Destinations Ty search for a nearby POI Search nearby 35 Delphi NAV200 F Add the selection to your itinerary The selected point will be marked by a small flag It will also be added to the list of Aad route points on the Route Planning screen where it will be labeled as your destination point Note Using this function while you are already navigating causes an immediate recalculation of your route Make the selection your next stopover on your it
43. nerary screen appears LELPHI Name of the itinerary Enter a name and tap Note Only the route points will be saved If you load an itinerary you will have to recalculate it 44 Delphi NAV200 Load itinerary Load a saved itinerary The Select Itinerary screen appears AUTUMN SPRING SUMMER A B Q R h oer Select the desired itinerary and tap WA Rename itinerary Rename a saved itinerary The Select Itinerary screen appears AUTUMN SPRIME SUMMER A es Q R Y Z Select the desired itinerary and tap The Name of the Itinerary screen appears 45 46 Delphi NAV200 LELPHI Name of the itinerary W 123 Sym Enter the new name of the itinerary and tap Ka The Select Itinerary screen reappears The itinerary has been renamed AUTUMN TOUR SPRING SUMMER B A Q R Y Z Tap WA to load the renamed itinerary or N to open the Route Planning screen without loading an itinerary Delete itinerary Delete an itinerary The Select Itinerary screen i appears AUTUMN TOUR SPRING SUMMER A ee QO R Y Z Delphi NAV200 Tap l to delete the selected itinerary The confirm screen appears AUTU Are you sure that you want to delete SUMME A I Q Y SPRING SUMMER WINTER A H G oO P W X 123 Sym I Q Y 47 Delphi NAV200 Calculating the Route An itinerary may be calculated even if no GPS si
44. on on adapter kits that can be plugged into Delphi NAV200 and subscriber services Once you have activated TMC per the adapter kit s instructions use the information in this section to take advantage of the features of TMC on the Delphi NAV200 Initializing the TMC Receiver and TMC Status Initialization of TMC begins as soon as GPS signals are received The current status of TMC service is indicated by an icon on the right side of the screen TMC off TMC is not activated TMC traffic messages cannot be evaluated by Delphi NAV200 No TMC No GPS signal therefore TMC service is not possible Searching for broadcast station The TMC receiver is ready but cannot receive TMC signals TMC ready TMC signals are being received 63 Delphi NAV200 Using TMC TMC provides the Delphi NAV200 with the latest traffic information to allow routes to be recalculated around traffic jams and other obstructions If TMC is activated you may display the traffic information on screen Note The number of current messages is indicated by the number beneath the 1 Tap the icon The TMC screen appears 4 95 7 MHz iilii Message 1 111 California I 5 NORTHBOUND ALTON PKY Slow traffic at 2 Use the Note Each message contains the state name or highway number of the affected street the applicable section or area and the kind of obstruction icons to scroll through the messages Note f you are currently navigat
45. oute around the obstacle Tap the Ignore icon to continue on the current route 66 Delphi NAV200 You can also adjust your obstacle avoidance status at any time by following these steps 1 Tap the icon The TMC screen appears Message 1 94 on the route 4 67 3 MHz California 1 5 SOUTHBOUND 210 Slow traffic is being avoided ah F 2 Use the a icons to search for the obstacle 3 Tap the Status button and select whether the selected obstacle is to be Avoided or Ignored 4 Tap Ml io update the route which is recalculated if necessary Tuning TMC Tap the Tuning button to toggle between Automatic tuning Hold station and Frequency input modes In Auto tuning mode the TMC receiver searches continually for the station that offers the best reception The name and frequency of the station are displayed Use the arrow keys to select a different station As soon as another station has been found its name and frequency are displayed In Hold station mode the current station is maintained In Frequency input mode you can directly enter a station s frequency Use the arrow keys to modify the frequency in steps of 0 1 MHz Tap WA to save your setting and close the TMC screen 67 Delphi NAV200 Section 10 Music Mode A Warning For your safety DO NOT operate the Delphi NAV200 entertainment features while driving Movie and music MP3 playing picture viewing world clock and calculator are
46. oute point The Destination screen appears Enter a destination as described in Selecting a Destination Delphi NAV200 re Street ee h 75 EH i ea 3 Tap Add to route The Route Planning screen appears The destination is added as route point 1 LELPHI 24300 Dana 1 Dana Point 92629 California Total trip Unknown Mi p Start navigation LELPHI 24300 Dana 1 Dana Point 92629 California 2 DANA POINT 25472 village Rd 3 5AN FERNANDO LA CASA DEG Total trip Unknown th S H Bs az Start navigation 43 Delphi NAV200 Editing Saving and Managing Itineraries The Delphi NAV200 allows you to save multiple itineraries for later use At any time you can add route points modify the order of route points or display the itinerary on the map The following options are available on the Route Planning screen Note Icons are deactivated if the list does not contain a route point Up Scroll up through list Down Scroll down through list Route point up Move the selected route point up the list e g route point 3 becomes route point 2 Route point down Move the selected route point down the list e g route point 2 become route point 3 Delete Delete the selected route point Add route point Add a new route point ahead of the currently selected route point Save itinerary Only itineraries that contain at least one route point can be saved When tapped the Name of the Iti
47. perating the Map To access the map in Standard mode 1 Tap Show on map on the Address screen after entering an address To access the map in Extended mode 1 Tap on Show map on the Main Menu 2 Tap on Select on map on the Destination screen 3 Tap on Show on map on the Address screen after entering an address The Map screen appears 53 Delphi NAV200 ad b i a i at ial Sk oo On the Map screen you have several control options Tap on map A quick tap accesses the Additional Functions screen where you can make adjustments Tapping and holding on the map brings up information about the selected point 54 Hide show icons Hide all icons so you can see more of the map Tap again to restore icons Note Also tap this icon to restore the standard view of the map if you have modified it as described below Frozen position default Makes the map scroll continually Your current position green arrow is always centered in the bottom third of the map Frozen map Freezes the map in its current location Your current position green arrow moves over the map and may even leave it Note This mode applies automatically when you scroll the map in Navigation mode Select this mode when you want to select a destination from the map while navigation is in progress Zoom Use these icons or the buttons to scale the map up or down You can also select a portion of the map to zoom in on by
48. ps Pause Playback stops temporarily Current status is displayed as Pause The Play button is deactivated and the Pause button activated The playback indicator on the playback bar stops moving Music Player 00 00 00 00 00 24 Music Plat er fale 00 00 00 00 03 24 sylophone WAY ABCDE MP3 SD0 Memory Inserted Notice Pop Up 69 Delphi NAV200 Stop Playback stops Current status is displayed as Stop Current playing time is displayed as 00 00 00 If Previous or Next is selected during stop only the file name moves playback remains stopped Music Player O0 00 0 0 000z zd ylophone Way A B F D E r i F 3 Repeat Default is All Repeat mode Tapping this option cycles through All Repeat gt All Play gt 1 Track Repeat gt All Play The repeat setting remains when Music mode is exited and is saved for the next session All Repeat All Play 1 Track Repeat Music Player Music Player Music Player Fak iA i a 1 13 xylophone WAV xylophone WAV xylophone WAY ABCDE MP3 ABCDE MP3 ABCDE MP3 Mute Mutes all volume Press again to turn sound on again Mute is released Mute Music Player Music Player Fao DANREM UIHIRELA 4 fae OO 002 7 00 03 ylophone WAY xylophone WAY ABCDE MPS ABCDE MP3 70 Delphi NAV200 Previous Next Tap the arrows or press the buttons to select the next or previous audio file in the list If the file is dama
49. rning This device contains a non replaceable lithium ion internal battery that can burst or explode releasing hazardous chemicals To avoid risk of fire or explosion do not attempt to replace the Delphi NAV200 battery The Delphi NAV200 battery is not user replaceable To reduce risk of fire or injury never disassemble crush puncture or dispose of the Delphi NAV200 in fire or water A Warning Never use the power adapter in a high moisture environment or touch it when your hands or feet are wet Make sure there is adequate ventilation around the adapter when in use and do not cover it with paper vinyl cloth including the carrying case or any other material The adapter must be connected to the correct power source Do not attempt to service the unit if its power lead or body becomes damaged or exposed to excess moisture A Caution Keep SD cards in a well protected case to avoid dust and humidity Make sure no foreign objects can enter the SD slot Delphi NAV200 Section 2 Unpacking The Delphi NAV200 Here s what you should find in the Delphi NAV200 package 1 The Delphi NAV200 unit with integrated GPS receiver OOJO NAVI MUSIC MOVIE PICTURE GAME CALC W GLOCK SETTINGS DELPHI 2 United States and Canada maps on SD card 3 Windshield mount with suction cup and dashboard mount 4 n vehicle charging cable Delphi NAV200 5 Stylus Pen 6 NAV200 Owners Kit e Quick Reference Guide e D
50. se buttons are designed to execute a function e g Save OK Cancel Show Map Navigation etc 2 Buttons to select one of two possibilities These buttons are designed to select one of two possibilities e g User mode Yes No On Off When you tap one of these buttons the display key switches to the other possibility Often this change must be confirmed by tapping another button normally OK or Save before the current screen closes 21 Delphi NAV200 3 Buttons to enter data These are actually entry fields like City or Zip Street Category etc When you tap an entry field another screen with a keyboard list or both will appear The entry must be confirmed by tapping another button normally OK or Save before the current screen closes Lists Often you will be asked to select an item from a list One entry is always tlh F highlighted Scroll through list with the Bl buttons and select your desired entry with the icon Adjusting the Volume Volume cannot be adjusted via the touch screen To adjust the volume turn the dial located on the right side of the device 22 Delphi NAV200 Initializing the Delphi NAV200 The Delphi NAV200 receives GPS signals continuously via the antenna In order for your antenna to receive signals ensure that 1 The unit is outside or in a vehicle parked outside 2 The antenna is pointing horizontally out through your windshield and has a clear view of the sky When you f
51. structions Check the volume Adjust volume with dial on right side of unit Unit does not start Check that you have followed the instructions If the unit still does not work call Delphi Customer Service 1 877 667 8700 or check the Delphi website www nav200 delphi com Contacting Technical Service Support For additional information in solving problems with Delphi NAV200 contact Delphi at 1 877 667 8700 Monday Friday 8 00 am 8 00 pm Saturday 10 00 am 5 00 pm and Sunday 10 00 am 4 00 pm Eastern Standard Time or visit www nav200 delphi com 80 Delphi NAV200 Technical Information Dimensions 134 mm x 80 mm x 29 mm Weight 190g Specifications screen size 3 5 diagonal 89 mm Screen resolution 320 x 240 pixels Number of colors 16 7M Microprocessor Samsung S3C2440 400 MHz Onboard storage memory for OS 32 MB GPS accuracy 16 5 5 m 95 Time to GPS fix cold start 2 min Time to GPS fix hot start 15 sec Map data NAVTEQ 81 Delphi NAV200 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a normal installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interf
52. tandard Mode In the Main Menu tap 1 Extended Mode In the Main Menu tap E The Destination screen appears Havigation LELPHI Region USA All states By Address sn Point ot interest Ta Select on map fe Recent de fF Favorites fe Recent destinations Tap 2 The Recent Destinations screen appears 194 Gibson Park Dr CHARLOTTE 6301 Baberton Ct MATTHEWS 366 E Charles St A I Q Y Tap on your choice to highlight it then tap 3 The Address screen appears 38 Delphi NAV200 LE amp ELPHI iina HUNTERSVILLE street Gibson Park Dr Intersection SSS OO Select from the following options Caution Using this function while you are already navigating deletes all current destinations including stopovers View the selection on the map Save the destination in Saved Destinations Using Your Home Address To store your home address select Settings on the Main Menu and then select home address to enter If you have stored your home address you may quickly begin navigation home from any location by tapping the icon on the Main Menu The route is calculated based on your settings in Routing Options 39 Delphi NAV200 Destination Management The Delphi NAV200 stores destinations in two locations Favorites and Recent Destinations Saving a Destination 1 After you have entered or selected a destination you can save it to ur Favorites by tapping n
53. ur safety DO NOT operate the Delphi NAV200 entertainment features while driving Movie and music MP3 playing picture viewing world clock and calculator are intended for use while you are not driving your vehicle DELPHI DISCLAIMS ALL LIABILITY FOR ANY USE OF THIS PRODUCT IN A WAY THAT MAY CAUSE ACCIDENTS DAMAGE OR THAT MAY VIOLATE THE LAW P 4 i 4 I iis XF a f f The Delphi NAV200 offers the classic game of Othello NAV200 is the black player the user is white To play tap twice on the square where you wish to place your disc The object of the game is to have the majority of your color discs on the board at the end of the game A move consists of outflanking your opponent s disc s then NAV200 s discs will be flipped to white To outflank means to place a disc on the board so that your opponent s row or rows of disc s is bordered at each end by a white disc A row may be made up of one or more discs When it is no longer possible for either player to move the game is over The player with the majority discs on the board is the winner Note It is possible for a game to end before all 64 squares are filled 76 Delphi NAV200 Section 14 Calculator Mode A Warning For your safety DO NOT operate the Delphi NAV200 entertainment features while driving Movie and music MP3 playing picture viewing world clock and calculator are intended for use while you are not dri
54. ving your vehicle DELPHI DISCLAIMS ALL LIABILITY FOR ANY USE OF THIS PRODUCT IN A WAY THAT MAY CAUSE ACCIDENTS DAMAGE OR THAT MAY VIOLATE THE LAW Delphi NAV200 features a standard calculator offering add subtract multiply and divide functions When Calculator mode is entered the Delphi NAV200 will display CALCULATOR Fa C Deletes the last input CE Deletes the last formula AC Clears all End Stops Calculator Ends without a pop up screen FFF Tap on the various numbers and function keys as a standard calculator 11 Delphi NAV200 Section 15 World Clock Mode Delphi NAV200 allows you to check the current time of any city in the world When the World Clock mode is entered the screen displays the time in the city where you currently are located Note World clock will work properly only when it has signed on from GPS satellites World Clock DST OFF Tap the arrow buttons to cycle through different time zones Section 16 Settings Delphi NAV200 allows you to adjust the screen settings and configurations to personal preferences Screen Settings Tap the screen to calibrate the device adjust LCD brightness select an opening screen to be displayed at startup and to select a preferred language Opening Screen Main Menu Language i Tap Save to save your settings 78 Delphi NAV200 Configure Settings Tap the screen to select a popup sound a button sound and tim

Delphi NAV200 GPS Receiver User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents