DeLonghi PAC60 Air Conditioner User Manual
Contents
1. IT a AT LA Pdo P LA close doorsand windows e Do not rest objects on the air conditioning unit Do not obstruct the airintake 6 oroutlet Lc e Make sure there are no heat sourcesin the room Do not use outdoors do not cover lower the blinds or draw the curtains Make sure the unit is located on a level floor If necessary place the two blocking devices 26 under the front wheels Maintenance Before cleaning or maintaining the unit always tum the unit off by releasing the bution D 10 and unplug from the mains CLEANING THE APPLIANCE We recommend cleaning the appliance with a slightly damp cloth then drying with a dry cloth For safety reasons do not wash the air conditioner with water Precautions Never clean with petrol alcohol or solvents Never spray liquid insecticide or similar CLEANING THE FILTERS Dust filter All of the models are equipped with a dust fil terable to capture the dust particles suspen ded in the air In orderto maintain the effectiveness of your air conditioner unaltered over time remem ber to clean the dust filter every two weeks 1 Remove the aspiration grill 6 see fig P 2 Remove the filter holder housing by deta ching it from the extemal grill To detach it press on the two wings found on the side of the filter holder see fig2. D r Customer Thank you for having purchased an appliance made by De Longhi the intemational leader in portable air conditioning units Thanks to our years of experience all around the world we are constantly improving the quality and performance of Pinguino We are confident that you will be satisfied with your purchase and enjoy the cool comfort created by the Pinguino for many years to come You should spend some time reading this instruction manual and keep it handy to refer to in orderto use your Pinguino efficiently Important safeguards Use this appliance only as described in this instruction manual Aswith any electrical appliance whilst the instructions aim to coveras many eventualities as possible caution and common sense should be applied when operating and installing this air conditioner This appliance has been manufactured to cool and de humidify domestic environments and should not be used forother purposes It is dangerous to alter or modify the unit s characteristics in any way The appliance must be installed in line with the relevant national legi slation Should repairs be necessary contact Parex Industries Ltd for your nea rest authorised De Longhi Service Agent Unauthorised servicing can be dangerous This appliance is to be used by adults o
3. Selecting functions AIR CONDITIONING FUNCTIONS To tum the unit on in air conditioning mode proceed as follows 1 Pressthe O button 10 the signal light I 9 will come on 2 Rotate the function selector 18 dial anti clockwise e Place the large star symbol Xin line with the reference mark to operate the unit in air conditioning mode at maximum fan speed the signal light 21 will come on and then after 3 minutes the signal light 14 will come on e Place the small star symbol in line with the reference mark to operate the unit in air conditioning mode at minimum fan speed the signal light 21 will come on and then after 3 minutes the signal light 15 will come on 3 Now set the required temperature by rota ting the room thermostat dial 19 Note The temperature is not expressed in degrees We recommend that you tum the thermostat dial to the maximum position When the desi red room temperature has been reached slowly tum the thermostat in a clockwise direction until it arrives at the position where a click can be heard The signal lights 21 and 14 or 15 will tum off The temperature selected in this way will automatically be regulated and maintained and save energy When regulating the ther mostat the air conditioning function is tem porarily interrupted and the unit continues to operate i
4. The manufactures cannot be held responsi ble for any damages due to failure in fol lowing normal safety procedures Replacement of the power cable must be camed out by qualified personnel SETTING THE TIMER The programmer timer 12 like all clocks must be set to the exact time If for example it is 4 00 pm 16 00 tum the dial in a clockwi se direction following the direction of the amow until the number 16 is lined up with the triangular pointer the amows indicates 4 00 P M approximately e u 1 ey ENY E pointer N B Never tum the dial in an anti c loc kwise direction 7 n L es NT The timer is in effect an electric clock and works only if the plug is connected to the power supply Whenever the plug is disconnected or there is a power failure the programmer stops the clock is then slow and must be re set u PROG RAMMED MODE 1 Set the operating times by pushing out the notches on the dial corresponding to the period required each notch represents 15 mins 2 Press the TIMER key 11 the signal light 13 will come ON Make sure that the timerindic atesthe cor rect time see instructions on setting operating time 4 Select the desired function asshown in the chart overleaf N B To override the programmed operating times simply press the ON OFF key 11 the timer signal lamp ON will go out
5. G Use a vacuum cleaner to remove the dust deposits on the filter If the filter is very dirty Pimmerse it in warm water rinsing it thorou ghly The temperature ofthe watershould be kept under 40 C After washing it let the filter dry before re inserting it into the holder AN fig G Purification filter if included with the appliance Clean the extemal side of the purfication fil teronce a week Use a vacuum cleaner at an intermediate power level Never clean the inside of the filter Replace the purification filter at the end of each season or in any case when it isno longereffective The puri fication filtercan be purchased in the store as an accessory or at an Authorised Service Centre asa replacement part Altematively the dust filter included with the appliance may be used in place of the purification filter CLEANING THE RESERVOIR 4 It is recommended that you clean thisat least once a month using the following method e tum off the appliance and remove the plug from the electrical outlet openthe front panel 3 and remove the tank 5 e remove the bung from the drainage hose 8 which can be found at the back the air conditioner and empty out the water to a container after draining off the water replace the drainage hos plug e remove the dirt by scrubbing gently with a cloth where the tank is positioned START OF SEASON CHE
6. height 785 mm e depth 435 mm Room temperature 21 32 C This appliance contains substances which if released into the atmosphere would damage the ozone layer Care should therefore be taken not to perforate the refrigerant circuit At the end of its working life delivery the air conditioning unit to a special collection cente De Longhi S p A Via L Seitz 47 31100 Treviso Italia tel 39 04224131 fax 39 0422413647 www delonghi com 5751008600 06 02
7. CKS Check that the power cable and socket are undamaged and that the earth installation is efficient Carefully observe the installation instruc tions REC OMMENDED OPERATIONS TO PERFORM ATTHE END OF THE SEASON 1 Proceed with scaling procedures see page 13 Remove the water from the collection reservoir 4 Operate the appliance in the ventilation only mode for about half an hour in order to thoroughly dry the inside of the air con ditioner Tum off the appliance and remove the plug from the outlet Remove the drainage hose 33 Clean the filterand dry itthoroughly befo re replacing it in the appliance Cover the appliance so that dust does not build up 2 3 gt DU 3 Descaling When the scale deposits become excessive on average after about 400 hours of opera tion or in any case at least once each sea son it is very important to proceed with the decalcification of the appliance as described below To remove the scale from the appliance you need e 250 ml of descaling liquid 27 L 77 O OU e 750 ml of clean water comesponding to a diluted solution of 75 fig H Proceed as follows 1 Remove the tank 5 from the appliance and drain the water remaining in the col lection reservoir 4 by using the draina ge hose 8 fig H N _ Close the drainage hose 8 Pour 250 ml
8. casement window use the suckers 25 provided to hold the two hal ves of the window together fig C For optimum results If you have a sash window place the bracket 28 on the window sil extend the bracket fully within the window frame fix the bracket by tuming the wing nut and lower the window onto the bracket Insert the win dow _attachment 24 of the exhaust hose 23 into the dot then connectthe hose to the airconditioner fig C1 Thanksto the wing nut it s possible to use the window bracket also for siding windows Position the hole of the bracket so to allow a correct installation of the exhaust hose see the following instructions AIRCONDMONING WITH INSTALLATION For more efficient use Pinguino can also be semi permanently installed FT To install proceed asfollows e Make a hole in a outside wall or through the glass of a window Check the height and dimensions given in figure D 8 106 mm ina window pane in the wood sill of a window in the wall for optimum results insulate the sec tion of the wall with suita ble insulating mate rial e Fit the flange e Fix the hose 22 supplied to the hole 23 to the coupling on the back of the unit figure A e Attach the end ofthe hose 23 to the flan ge 22 asshown in the fig
9. ed in there is no electricity plug in wait the air conditioner is on signal light 9 but the appliance doesn t start The notches of the timer are in the rest mode proceed with a new setting of the timer The unit works but does not cool the room three minutes have not passed since it was tumed on windows open a heatsource isoperating in the room bumer light etc orthere are a lot of people the air outlet hose has come detached from the coupling thermostat adjusted too high air filters clogged the output of the unit is insufficient for the con ditions or size of the room wait three minutes safety devi ce before the appliance start cooling close the windows eliminate heat sources fit the hose in the coupling lower the thermostat clean replace filters The unit works for only a short time there isa kink in the exhaust hose the exsaust hose is blocked there are too many curves in the outlet tube the fan is blocked postion the exhaust hose correctly check there are no blockages preventing the discharge of air to the outside rearrange the hose conectly contact the Service Centre Technical specification TECHNICAL SPECIACATION Power supply see rating plate Max absorbed power in air conditioning Refrigerating capacity Refrigerant i Numberof fan speeds 2 Max airflow 370 m h Dimensions e width 580 mm RECOMMENDED OPERATING CONDMONS
10. l light 16 will come on PURIFICATION FILTER Only for some models In addition to dust this purification filteris able to capture even the smallest sized particles and impurities up to 0 003 millimetres such ascigarette smoke The purfication filter should never be used with the dust filter which is also included with the appliance Therefore A If you wish to use the purfication filter Remove the purification filter from the filter housing Remove the aspiration grill 6 fig G on page 24 and the dust filter which is attached to this Remove the purfication filter from its packa ging Recommendations Anchor the filter to the appliance by atta ching the two plastic pieces on the filter to the special supports on the air conditioner see the illustration below Set the dust filter aside B If the dust filter is suffic ient Remove the purification filter from the filter housing and set it aside RECOMMENDATIONS Follow these recommendations to achieve maximum efficiency from your air conditio ning unit e Close the doors and windows in the room where the unit is functioning The only exception isin the case of installation throu gh a hole in the wall orwindow In thiscase you are recommended to allow a small amount of airto enterthrough a dooror
11. n fan only mode In this way the appliance keeps the air temperature within the room even Delay on Start Up 1 A special safety device will delay the start of airconditionig by approximately 3 to 5 minutes when switching between func tions or on initial start up 2 You may also experience a slight dela y between changing from one function to another TURBO POWER The Turbo Power mode was designed to pro vide the appliance with a greater cooling potential This is particularly useful when you want to bring the temperature of a very warm room quickly down to a more comfor table level In this case Make sure that the tank is full of water see page 22 Make sure that the function selector switch 18 is in the large crystal position Press the Turbo Power button 20 After reaching the desired temperature you can release the Turbo Power button and reposition the selector switch to the small cry stal Doing so will make the operation quiter VENTILATION ALTRATION Rotate the function selector 18 clockwise Pressthe Q button 10 the signal light I 9 will come on e Place the large symbol orthe symbol Je inline with the reference markto ope rate the unit at maximum fan speed the signal light 17 will come on Place the small symbol orthe symbol in line with the reference mark to operate the unit at minimum fan speed the signa
12. nly keep away from children In the case that the powercable becomes damaged this must be sub stituted only by specialised personnel authorised by the manufacturer Always ensure the appliance is earthed If you have any doubtscheck with a qualified electrician Avoid using extension leads with the unit Before cleaning or maintenance operations always unplug the unit from the socket Do not pull on or place strain on the power cable when moving the appliance The appliance should not be installed where the atmosphere may contain combustible gases oil or sulphur or near heat sources Do not rest hot or heavy objects onto the appliance Remember to perform the descaling procedure at the end of each season see page 13 In areas where the water is particularly hard rich in minerals the use of a commercial anti lime product added to the water is recommended Thiscan be requested from Parex Indu stries Ltd Clean the filters at least once a week Avoid using heaters near the unit The unit should be transported in a vertical position If this is not possible secure the unit at an angle do not lie horizontally Before transporting the unit drain the condensation collecting tray and tank After transportation wait at least 1 hour before switching on the unit The packaging materials can be recycled You are therefore recom mended to place them in the special containers for differentiated waste collection How does your Pinguino
13. of decalcifying liquid and 1 litre of clean water into the collec tion reservoir 4 which isfound under the tank fig I on the bottom of the applian ce Operate the airconditionerforabout half an hour After this drain out all of the liquid remai ning in the collection reservoir and rinse thoroughly During the rinsing process the drainage hose must be open and the appliance functioning Unplug the appliance from the mainsand clean the collection reservoir thoroughly with a clean cloth After cleaning the collection reservoir the airconditionercan be used normally fig I w gt SI 2 IF TRACES OF SUDS CAN BE SEEN IN THE WATER WHEN THE MACHINE IS USED AGAIN AFTER IT HAS BEEN CLEANED AS DESCRIBED ABOVE THIS IS NORMAL HOWEVER IF THERE ARE A LOT OF SUDS RINSE THE APPLIANCE AGAIN THO ROUGHLY TO REMOVE ALL TRACES OF CLEANING PRODUCT REQUEST ADDITIONAL QUANTITIES OF DECALCIFYING LIQUID FROM PAREX INDUSTRIES LTD ATTENTION The use of products otherthan De Longhi could cause damage to the intemal components of the appliance and invalidate the terms of the wananty Troubleshooting If the unit is not working properly this ma y be due to small problemsthat you can easly resolve yourself Follow these instructions carefully before contacting your local Authorised Technical Service Centre PROBLEM CAUSE REMEDY The air conditioner is completely tumed off it is not plugg
14. ont panel B Tum the tankupside down 3 grip either side of the and remove the plug panel and gentiy pull the remove the extendible the panel towards you and upwards Remove the tank tube and fill the tank lea ving iton the ground replace the cap and screw it in tightly Retum the tank to its place with the writing FRONT clearly visible Carefully hold the panel in the centre and lower to its closed posi tion 5 Lifting it forward During the water functioning operation and in particularly silent locations eg the bedroom a slight gurgling sound may be heard This is completely normal IN HIGH HUMIDITY CONDITIONS Water is extracted from the air in the room this water is also used to cool the condenser When the humidity is particulary high an excess of water may build up in the intemal tank This can be drained by removing the bung from the drain hose 11 and draining into a suitable receptacle IMPORTANT if the room temperature is 32 C orover the airc onditioner must be operated with with water in the tank Turning on and setting the timer ELECTRICAL CONNECTION Before plugging in check that e the mains supply coresponds to the power supply shown on the rating plate e the socketand the mainslead correspond to the power requirements of the applian ce e the socket is suited to the plug otherwise have the socket replaced e the socket is properly grounded
15. ure E A MAX 120 cm MIN 30 cm LV_ When the hose 23 isnot attached close the hole with the bung on the flange 22 NOTE When the unit is installed semi permanently we recommend leaving a door slightly open 1 cm is enough to ensure an adequate exchange of air Preparation for use HOW TO USE THE AIR CONDITIONER WITH WATER These air conditioners can use both airand water to cool the condenser the hot part of the air conditioner To utilise the full potential of yourairconditioner the tank 5 needsto be filled with water The water is used to increase the cooling powerand reduce the noise level and energy consumption of the air conditioner The water that is used in then expelled from the machine as water vapour through the exhaust hose 23 it doesnot go into room Always use clean top water which doesn t contain salts Asa rule the water will usually lat about 8 hours however this depends on the conditions within the room such as temperature humidity insula tion and aspect and number of people In turbo mode the water will also be used more quickly You may also use the airconditioneron air cooling only without filling the watertank if you only requi re the lower cooling power C After completing the fil ling procedure replace extendible hose A To open the fr
16. work Dino the summer optimum comfort isachieved with a temperature of around 24 C and 50 relative humidity An air conditioner removes moisture and heat from the room where it islocated One advantage of portable air conditioning units over fitted models is that they can be moved from one room to another in the home oreven transfered between different buildings The hot airin yourroom is passed through a coil cooled by refrigerant gas removing excess heat and moistu re before being discharged again into the room In single unit models a small amount of this air is used to cool the refrigerant gas then the hot and moist airis discharged outside For more details contact or visit our Intemet site www delonghi com The following instructions will help you set up your air conditioning unit as efficiently as possible AIR CONDITIO NING WITHOUTINSTALLATION FOR INSANT TEMPORARY USAGE With just a few simple operations Pinguino will restore comfortable conditions in your room Fix the exhaust hose 23 to the coupling 7 on the back of the unit as shown in figu re A A Fix the window attachment 24 to the end of the hose 23 Place the unit neara window French win dow or door Open the window French window ordoor slightly and place the window attachment 24 as shown in figure B With a double
Download Pdf Manuals
Related Search