Datalogic Scanning GM4100 Barcode Reader User Manual
Contents
1. PASE a NA TATO Power Connection Plug the AC Adapter in to an approved AC wall socket with the cable facing downwards as shown in Figure 1 to prevent undue strain on the socket Gryphon Mobile can also be Powered by the Terminal The external power supply is recommended but not necessary When powered by the Terminal the battery charger is auto matically set as Slow charge NOTE Disconnecting the Cable To detach the cable insert a paper clip or similar object into the hole on the base as shown in Figure 5 Figure 5 Disconnecting the Cable Insert Paper Clip 16 Gryphon GM4100 Linking the Reader to a Base Station Linking the Reader to a Base Station RF Devices For RF devices before configuring the interface it is necessary to link the handheld with the base To link the handheld and the base press the trigger to wake it and place it on the base If the reader was previously linked to another base you must first scan the Unlink action command before re linking to the new base Unlink System and Network Layouts Stand Alone Layouts Figure 6 Single Reader Layout Quick Reference Guide 17 System and Network Layouts e GRYPHON Figure 7 Multiple Reader Layout In stand alone systems each cradle is connected to a single Host Figure 8 Multiple Stand Alone Layouts ee GRYPHON GRYPHONT af da Py HOST pi Pa 2er Py HOST i OT C2. I Display STAR FIELD COVERAGE BATTERY CHARGE STATUS Programming The reader is factory configured with a set of standard default fea tures After scanning the interface barcode from the Interfaces sec tion you can select other options and customize your reader through use of the instructions and programming barcodes avail able in the Gryphon I GD4100 GM4100 Product Reference Guide PRG Check the corresponding features section for your interface and also the Data Editing and Symbologies chapters of the PRG Using the Programming Barcodes This manual contains barcodes which allow you to reconfigure your reader Some programming barcode labels like the Standard Product Default Settings on page 21 require only the scan of that single label to enact the change Other barcodes require the reader to be placed in Programming Mode prior to scanning them Scan an ENTER EXIT barcode once to enter Programming Mode scan the desired parameter set tings then scan the ENTER EXIT barcode a second time to ac cept your changes exit Programming Mode and return the reader to normal operation 20 Gryphon GM4100 Programming Select the Interface Type Upon completing the physical connection between the reader and its host proceed directly to Interface Selection on page 22 for in formation and programming for the interface type the reader is connected to for example RS 232 Keyboard Wedge USB etc and scan t
3. 10 2 Upon termination of this Agreement End User immediately shall cease using any nonembedded software and shall return to Datalogic or destroy all non embedded software covered by this Agreement and shall furnish Datalogic with a certificate of compliance with this provision signed by an officer or authorized representative of End User For embedded software End User agrees to sign a waiver prepared by Datalogic concerning further use of the embedded Software End User s resumed or continued use of the embedded Software after termination shall constitute End User s agreement to be bound by the terms and conditions of this Agreement for such use 11 General Provisions 11 1 Entire Agreement Amendment This document contains the entire agreement between the parties relating to the licensing of the Software and supersedes all prior or contemporaneous agreements written or oral between the parties concerning the licensing of the Software This Agreement may not be changed amended or modified except by written document signed by Data logic 11 2 Notice All notices required or authorized under this Agreement shall be given in Quick Reference Guide 5 Software Product Policy writing and shall be effective when received with evidence of receipt Notices to Datalogic shall be sent to the attention of Contract Administration Data logic Scanning Inc 959 Terry Street Eugene OR 97402 or such other address as may be specifie
4. EMI RFI es RG Mexico NOM Cofetel Singapore IDA Pending Brasile Anatel LED class safety IEC Class 1 Radio Features 433MHz model 910MHz model Working Center Freguency 433 920 MHz 910 000 MHz Range in open air 30m 15m System Configuration 433MHz model 910MHz model Max Number of devices per 16 16 base station 36 Gryphon GM4100 LED and Beeper Indications LED and Beeper Indications The reader s beeper sounds and its LED illuminates to indicate various functions or errors on the reader An optional Green Spot also performs useful functions The following tables list these indications One exception to the behaviors listed in the ta bles is that the reader s functions are programmable and may or may not be turned on For example certain indications such as the power up beep can be disabled using programming barcode labels INDICATION DESCRIPTION LED BEEPER Reader beeps The reader is in aur a highest fre Power up Beep the process of minsay quency and vol P ume upon power up pag baban The reader will for this indica tion is configu repone aule A label has been rent frequency successfully rable via the volume mono Good Read Beep feature Good f scanned by the Rendi Wikan ta bi tonal setting reader Indicate and duration see the PRG for brad ful label scan information ee tom ROM Failure satiate Flashe
5. GM4100 Warranty NOTES Quick Reference Guide 45 Warranty NOTES 46 Gryphon GM4100 DATALOGIC DECLARATION OF CONFORMITY EC 056 C 09 Rev 0 Pag 1 di 1 Datalogic Scanning Group Srl Via S Vitalino 13 Lippo di Calderara di Reno BO 40012 Italy dichiara che declares that the d clare que le bescheinigt daB das Ger t declare que el Gryphon GM 41xx Cordless Barcode Reader Gryphon BC 40xx Cordless Base Station Charger Gryphon CHR GM40 Charger Only Base e tutti i suoi modelli and all its models et tous ses modeles und seine Modelle y todos sus modelos sono conformi alle Direttive del Consiglio Europeo sottoelencate are in conformity with the requirements of the European Council Directives listed below sont conformes aux sp cifications des Directives de l Union Europ enne ci dessous den nachstehenden angef hrten Direktiven des Europ ischen Rats cumple con los requisitos de las Directivas del Consejo Europeo seg n la lista siguiente Questa dichiarazione basata sulla conformit dei prodotti alle norme seguenti This declaration is based upon compliance of the products to the following standards Cette d claration repose sur la conformit des produits aux normes suivantes Diese Erkl rung basiert darauf da das Produkt den folgenden Normen entspricht Esta declaraci n se basa en el cumplimiento de los productos con las siguientes normas ETSI EN 301 489 3
6. amp 95 w Std Key Encoding Keyboard Wedge for IBM AT PS2 with standard key encoding but without external keyboard e AT PS 2 25 286 30 286 50 50Z 60 70 80 90 amp 95 without Alternate Key e Keyboard Wedge for IBM AT PS2 without alternate key encoding but without external keyboard All other interfaces support ONLY the following Country Modes U S Belgium Britain France Germany Italy Spain Sweden Quick Reference Guide 27 Country Mode ENTER EXIT PROGRAMMING MODE Country Mode Country Mode Belgium Count ryM ode Britain Country Mode Croatia Supports only the interfaces listed in the Country Mode feature description 28 Gryphon GM4100 Country Mode Country Mode Czechoslovakia Country M ode Denmark Country Mode France Count Ty Mode Germany Country Mode Hungary Country Mode It Supports only the interfaces listed in the mum Mode description feature Quick Reference Guide 29 Country Mode Country Mode Japanese 106 key Country Mode Norway Country Mode Poland Country Mode Portugal Country Mode Romania Count ryM ode Slovaki Supports only the interfaces listed in the Country Mode feature description 30 Gryphon GM4100 Country Mode Country M ode Spain Country Mode Sweden Country Mo
7. to the buyer Customers Under Software Support Customers that elect to subscribe to Datalogic Software Mainte nance and Support Agreement will receive 30 days advance noti fication of 1 the release of a new software version and or 2 discontinuation of any prior software version that will no longer be supported Datalogic will provide maintenance for a fee that will assist customers in transitioning to the next software version If a customer is currently using the software version being discon tinued the customer may elect to transition to any one of the newer versions depending on the hardware in use To arrange for a Software Maintenance and Support Agreement please contact your Datalogic sales person 6 Gryphon GM4100 Setting Up the Reader Setting Up the Reader Follow the steps below to connect and get your reader up and communicating with its host 1 Install the Batteries 2 Connecting the Base Station 3 Select the Interface Type 4 Configure Other Settings if not using factory settings for that interface Battery Safety To install charge and or do any other action on the battery fol low the instructions in this manual Before installing the Battery read Battery Safety on the following pages Datalogic recommends annual replacement of rechargeable battery packs to ensure NOTE maximum performance Quick Reference Guide 7 Setting Up the Reader Do not discharge the batte
8. Datalogic a return authorization number for return of the product to designated Datalogic service center If Datalogic determines Customer s claim is valid Datalogic will repair or replace product without additional charge for parts and labor Customer shall be responsible for packaging and shipping the product to the designated Data logic service center with shipping charges prepaid Datalogic shall pay for the return of the product to Customer if the shipment is to a location within the country in which the Datalogic service center is located Customer shall be responsible for paying all shipping charges duties taxes and any other charges for products returned to any other locations Warranty is subject to the limitations and exclusions set forth in the paragraphs that follow WARRANTY SET FORTH ABOVE IS IN LIEU OF ANY OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING MERCHANTABILITY AND FITNESS Exclusions Warranty coverage shall not apply to any claimed defect failure or damage which Datalogic determines was caused by improper use of product failure to provide product maintenance including but not limited to cleaning of the upper window in accordance with product manual installation or service of product by other than Dat alogic representatives use of product with any other instrument equipment or appa ratus modification or alteration of product External cables and replacement of upper window cartridge due to scratching stains o
9. acknowl Kane andien Partial Label edges each qeu m rent volume portion as it is successfully scanned 38 Gryphon GM4100 Error Codes INDICATION DESCRIPTION LED BEEPER Configuration option s have Reader sounds Label Program been successfully one high fre ming Mode programmed via N A quency beep and Acceptance of labels and the 4 low frequency Programming reader has exited beeps followed Programming by reset beeps Mode Reader sounds Label Program Cancel label has two times at low ming Mode Can N A been scanned frequency and cel Item Entry current volume a Exceptwhen in sleep mode or when a Good Read LED Duration other than 00 is selected Error Codes Upon startup if the reader sounds a long tone this means the reader has not passed its automatic Selftest and has entered FRU Field Replaceable Unit isolation mode If the reader is reset the sequence will be repeated The following table describes the LED flashes beep codes associated with an error found NUMBER OF LEO ERROR CORRECTIVE ACTION FLASHES BEEPS 1 Configuration 2 Interface PCB 4 Reader Module Contact Helpdesk for 5 Laser Pointer if so assistance equipped 6 Digital PCB 14 CPLD Code Mismatch Quick Reference Guide 39 Base Station Indications Base Station Indications INDICATION LEDS Power up Complete Yellow LED on Reader Disabled by
10. manual that is complete and accurate however Dat alogic reserves the right to change any specification at any time without prior notice Datalogic and the Datalogic logo are registered trademarks of Datalogic S p A in many countries including the U S A and the E U All other brand and product names may be trademarks of their respective owners Patents Design Pat EP 870 787 US Pat 5 144 118 5 311 000 5 481 098 5 493 108 5 929 421 5 992 740 6 098 883 6 260 764 6 443 360 B1 6 517 003 B2 6 631 846 B2 6 808 114 B1 6 817 525 B2 6 997 385 B2 7 075 663 B2 7 387 246 B2 European Pat 789 315 B1 926 620 B1 962 880 B1 997 760 B1 1 128 314 B1 1 128 315 B1 1 164 536 B1 1 396 811 B1 Additional patents pending Table of Contents Statement of Agency Compliance oooo ooooooo ocoooooo oooooo oooo o mo 1 FCC Class B Compliance Statement FCC RF Radiation Exposure Statement Canadian Notice Software Product Policy Customers Under Software Support Setting Up the Reader Battery Safety Install the Batteries Configuring the Base Station Changing the Base Station Position Connecting the Base Station Securing the DC Power Cord Optional Linking the Reader to a Base Station RF Devices System and Network Layouts Stand Alone Layouts Using the BC40xx Radio Base Base LEDs Display Programming Using the Programming Barcodes Select the Interface Type Configure Other Settings Resetting Stand
11. the finite life of a LI battery but cell manufacturers rate them at 500 charge cycles In other words the batteries should be expected to take 500 full dis charge charge cycles before needing replacement This number is higher if partial discharging recharging is adhered to rather than full deep dis charging The typical manufacturer advertised useful life of LI batteries is one to three years depending on usage and number of charges etc after which they should be removed from service especially in mission critical applications Do not continue to use a battery that is showing excessive loss of capacity it should be properly recycled disposed of and replaced For most applications batteries should be replaced after one year of service to maintain customer satisfaction and minimize safety concerns Collect and recycle waste batteries separately from the device in comply with European Directive 2006 66 EC 2002 95 EC 2002 96 EC and subsequent modifications US and China regulatory and others laws and regulations about the environment Quick Reference Guide 9 Setting Up the Reader Install the Batteries Before installing the Battery read Battery Safety on the preceding pages Datalogic recommends annual replacement of rechargeable battery packs to ensure NOTE maximum performance To install or change the battery of your reader you must 1 With a screwdriver unscrew the battery cover screw 2 Un
12. v1 4 1 August 2002 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS ERM ELECTROMAGNETIC COMPATIBILITY EMC STANDARD FOR RADIO EQUIPMENT AND SERVICES PART 3 SPECIFIC CONDITIONS FOR SHORT RANGE Devices SRD OPERATING ON FREQUENCIES BETWEEN 9KHZ AND 40GHZ ETSI EN 300 220 3 v1 1 1 September 2000 ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS ERM SHORT RANGE Devices SRD RADIO EQUIPMENT TO BE USED IN THE 25MHz TO 1000MHz FREQUENCY RANGE WITH POWER LEVELS RANGING UP TO 500MW PART 3 HARMONIZED EN COVERING ESSENTIAL REQUIREMENTS UNDER ARTICLE 3 2 OF THE R amp TTE DIRECTIVE EN 60950 1 December 2001 INFORMATION TECHNOLOGY EQUIPMENT SAFETY PART 1 GENERAL REQUIREMENTS Lippo di Calderara February 24th 2009 Ruggero Cacioppo Quality Assurance Manager Ro IH Qey Uo Australia Datalogic Scanning Pty Ltd Telephone 61 2 9870 3200 australia scanning datalogic com France and Benelux Datalogic Scanning SAS Telephone 33 01 64 86 71 00 france scanning datalogic com Germany Datalogic Scanning GmbH Telephone 49 0 61 51 93 58 0 germany scanning datalogic com India Datalogic Scanning India Telephone 91 22 64504739 india scanning datalogic com Italy Datalogic Scanning SpA Telephone 39 0 39 62903 1 italy scanning datalogic com Japan Datalogic Scanning KK Telephone 81 0 3 3491 6761 japan scanning datalogic com Latin America Datalogic Scanning Inc Telephone 305 5
13. 91 3222 latinamerica scanning datalogic com Singapore Datalogic Scanning Singapore PTE LTD Telephone 65 6435 1311 singapore scanning datalogic com Iberia Datalogic Scanning SAS Sucursal en Espana Telephone 34 91 746 28 60 spain scanning datalogic com United Kingdom Datalogic Scanning LTD Telephone 44 0 1582 464900 uk scanning datalogic com v DATALOGIC www scanning datalogic com Datalogic Scanning Inc 959 Terry Street Eugene OR 97402 USA Telephone 541 683 5700 Fax 541 345 7140 2009 Datalogic Scanning Inc 820002384 Rev D 9 09
14. Any changes or modifications to equipment not expressly ap proved by Datalogic could void the user s authority to operate the equipment Power Supply This device is intended to be connected to a UL Listed CSA Cer tified computer which supplies power directly to the reader or else be supplied by UL Listed CSA Certified Power Unit marked Class 2 or LPS power source rated 5 14V minimum 900mA which supplies power directly to the Base Charger via the power connector of the Base itself Quick Reference Guide 41 Regulatory Information Imager Labeling Labels are shown here to illustrate their location only Please view the labels on your product for actual details Scanner Regulatory Label Datalogic Scanring Inc Eugene Oregon USA Model GRYPHON ype 8C4030 BK 433MHz Li E NN S N Vott 4 7 14 VOC imax 0 54 C MFG DATE February 2000 unam N263 PATENTS PENDING 239045 Base Station Label 42 Gryphon GM4100 Regulatory Information WEEE Statement Waste Electrical and Electronic Eguipment WEEE Statement English Forinformation about the disposal of Waste Electrical and Electronic Eguipment WEEE please refer to the website at www scanning datalogic com Italian Per informazioni sullo smaltimento delle apparecchiature elettriche ed elettroniche consultare il sito Web www scanning datalogic com French Pour toute information relativ
15. DATALOGIC Gryphon GM4100 General Purpose Handheld Linear Imager Barcode Reader Quick Reference Guide Datalogic Scanning Inc 959 Terry Street Eugene Oregon 97402 Telephone 541 683 5700 Fax 541 345 7140 An Unpublished Work All rights reserved No part of the con tents of this documentation or the procedures described therein may be reproduced or transmitted in any form or by any means without prior written permission of Datalogic Scanning Inc or its subsidiaries or affiliates Datalogic or Datalogic Scanning Owners of Datalogic products are hereby granted a non exclu sive revocable license to reproduce and transmit this documen tation for the purchaser s own internal business purposes Purchaser shall not remove or alter any proprietary notices including copyright notices contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation Should future revisions of this manual be published you can acquire printed versions by contacting your Datalogic represen tative Electronic versions may either be downloadable from the Datalogic website www scanning datalogic com or provided on appropriate media If you visit our website and would like to make comments or suggestions about this or other Datalogic publications please let us know via the Contact Datalogic page Disclaimer Datalogic has taken reasonable measures to provide informa tion in this
16. Data logic or Datalogic s third party licensors and that the Software is protected by intellec tual property laws and treaties The license set forth in this Agreement does not transfer to End User any ownership of Datalogic s or its third party licensors copyrights patents trademarks service marks trade secrets or other intellectual property rights and End User shall have no right to commence any legal actions to obtain such rights End User shall not remove modify or take any other action that would obscure any copyright trademark patent marking or other intellectual property notices contained in or on the Datalogic Product 5 Proprietary Information 5 1 End User acknowledges that Proprietary Information is the confidential pro prietary and trade secret property of Datalogic and Datalogic s third party licensors and End User acquires no right or interest in any Proprietary Informa tion 5 2 End User shall not disclose provide or otherwise make available the Proprie tary Information of Datalogic or its third party licensors to any person other than End User s authorized employees or agents who are under confidentiality agreement and End User shall not use the Proprietary Information other than in conjunction with use of the Datalogic Product exclusively for End User s internal business purposes End User shall take steps to protect the Proprietary Information no less securely than if it were End User s own intellectual prop
17. Li lon battery pack 4 hours with external power supply adapter Charge time for full charge from full discharge max 22h hours with Host power in this case no supply adapter is needed Operating autonomy 50 000 reads continuous reading typical Cradle consumption Volt 4 75 14 VDC Power 8WP and DC input supply range Imax 500mA when in host bus powered mode Performance Characteristics Light Source LEDs Roll Tilt Tolerance 35 from normal Pitch Tolerance 65 Skew Yaw Tolerance 65 Field of View 10 25 4cm wide at 12 5 31 8cm from the reader 3 mil 2 9 to 4 7 7 5cm to 12cm Depth of Field Typical 13 mil 1 2 to 23 6 3cm to 60cm 20 mil 1 2 to 31 5 3cm to 80cm Minimum Element Width 3 mil 34 Gryphon GM4100 Technical Specifications Item Description Print Contrast Minimum 1596 minimum reflectance Decode Capability UPC EAN JAN P2 P5 add ons Code 39 Italian Pharmacode 39 Code 128 C128 ISBT Code 128 add ons 2 of 5 Standard 2 of 5 Code 11 Codabar EAN 128 Code 93 MSI GS1 DataBar Omnidirectional GS1 DataBar Limited GS1 DataBar Expanded Code4 Code5 RS 232 Std RS 232 Wincor Nixdorf RS 232 OPOS IBM 46xx ports5B and 9B USB Com Std USB Key board USB Alternate Keyboard USB OEM Keyboard Wedge AT with or w o Alternate Key IBM AT PS2 Interfac
18. NK 24 Gryphon GM4100 Interface Selection PC XT w Standard Key Encoding Select Keyboard Wedge for IBM Terminal 3153 Select KBD IBM 3153 Keyboard Wedge for IBM Terminals 31xx 32xx 34xx 37xx make only keyboard Select KBD IBM M Keyboard Wedge for IBM Terminals 31xx 32xx 34xx 37xx make break keyboard Select KBD IBM MB Quick Reference Guide 25 nterface Selection Keyboard Wedge for DIGITAL Terminals VT2xx VT3xx VT4xx Select KBD DIG VT USB Keyboard with standard key encoding Select USB Keyboard USB Keyboard with alternate key encoding Select USB Alternate Keyboard USB Keyboard for Apple computers Select USB KBD APPLE Select W 26 Gryphon GM4100 Keyboard Interface Keyboard Interface Use the programming barcodes to select options for USB Key board and Wedge Interfaces Standard Factory Settings Reference the Gryphon I GD4100 GM4100 Product Refer ence Guide PRG for a listing of standard factory settings Scancode Tables Reference the Gryphon I GD4100 GM4100 PRG for infor mation about control character emulation which applies to key board interfaces Country Mode This feature specifies the country language supported by the key board Only the following interfaces support ALL Country Modes e USB Keyboard without alternate key encoding AT PS 2 25 286 30 286 50 50Z 60 70 80 90
19. RADLE y a E hb NYA GRYPHON HOST We CRADLE Ke a mid Many stand alone connections can operate in the same physical area without interference provided all readers and cradles in the system have different addresses 18 Gryphon GM4100 Using the BC40xx Radio Base Using the BC40xx Radio Base Base LEDs LEDs on the Gryphon I Base provide information about the Base s status as shown in Figure 9 Figure 9 Gryphon I Base LEDs ELT TE YELLOW LED BUTTON RED LED GREEN LED The following table describes the significance of each LED Yellow On Base is powered 5 Poweron Data Yellow Blinking Base receives data and commands from the Host or the Reader EE Charging Red On the Battery is in progress BER Charge completed Green On the Battery is completely charged Charging Red and Green Blinking together the Reader E Charge completed is not correctly placed onto the Base A button is available to force device connection via the Datalogic Aladdin Software tool and for paging the scanner when bidirec tional connection is activated Refer to the Gryphon I Product Reference Guide PRG for a more detailed explanation Quick Reference Guide 19 Programming Display The Gryphon I is also available with an optional Display The FSTN Display with white LED backlight provides additional in formation Figure 10 Gryphon
20. STRICT LIABILITY WARRANTY OR ANY OTHER BASIS EXCEED THE PRICE OR FEE PAID BY END USER FOR THE DATALOGIC PRODUCT UNDER NO CIRCUMSTANCES SHALL DATALOGIC BE LIABLE TO END USER OR ANY THIRD PARTY FOR LOST PROFITS LOST DATA INTERRUPTION OF BUSINESS OR SERVICE OR FOR ANY OTHER SPECIAL CONSEQUENTIAL CONTINGENT INDIRECT INCIDENTAL PUNITIVE EXEMPLARY OR OTHER SIMILAR DAMAGES EVEN IF DATALOGIC HAS BEEN ADVISED OF THE POSSIBIL ITY OF SUCH DAMAGES 9 Government Restricted Rights International Use 9 1 Use duplication or disclosure of the Software by the U S Government is sub ject to the restrictions for computer software developed at private expense as set forth in the U S Federal Acquisition Regulations at FAR 52 227 14 g or 52 227 19 or in the Rights in Technical Data and Computer Software clause at DFARS 252 227 7013 c 1 ii whichever is applicable 92 If End User is using the Datalogic Product outside of the United States End User must comply with the applicable local laws of the country in which the Datalogic Product is used with U S export control laws and with the English language version of this Agreement The provisions of the United Nations Convention on International Sale of Goods shall not apply to this Agreement 10 Termination 10 1 Either party may terminate this Agreement or any license granted under this Agreement at any time upon written notice if the other party breaches any provision of this Agreement
21. ans le Reglement sur le brouillage radio electrique edicte par le ministere des Communications du Cana da Do not attempt to open or otherwise service any compo nents in the optics cavity Opening or servicing any part of the optics cavity by unauthorized personnel may vio CAUTION late laser safety regulations 2 Gryphon GM4100 Statement of Agency Compliance Datalogic Scanning Inc GRYPHON PRODUCT SERIES END USER LICENSE AGREEMENT Notice to End User The Datalogic Product you have acquired contains embed ded Software which is integral to the product s operation This Software is being provided to you under license subject to the terms and conditions of this Agreement If you use the Datalogic Product you will be deemed to have accepted the terms and conditions of this Agreement If you do not intend to be bound to the terms of this Agreement Datalogic is not willing to license the Software to you you may not use the Datalogic Product or the Software and you must contact the party from whom you acquired the Datalogic Product for instructions This End User Software License Agreement Agreement is a legally binding agree ment governing the licensing of the Software and Documentation by Datalogic Scan ning Inc and its Affiliates Datalogic to the entity or person who has purchased or otherwise acquired a Datalogic Product End User For purposes of this Agreement any software that is associated with a
22. ard Product Defaults Interface Selection Configuring the Interface Keyboard Interface Standard Factory Settings Scancode Tables Country Mode Caps Lock State Numlock Technical Specifications LED and Beeper Indications Error Codes Base Station Indications Ergonomic Recommendations Regulatory Information Power Supply Imager Labeling WEEE Statement Warranty NOTES Gryphon GM4100 Quick Reference Guide E Statement of Agency Compliance This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any in terference received including interference that may cause unde sired operation FCC Class B Compliance Statement The user is cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user s authority to operate the equipment This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful int
23. d by Datalogic in writing 11 3 Waiver A party s failure to enforce any of the terms and conditions of this Agree ment shall not prevent the party s later enforcement of such terms and condi tions 11 4 Governing Law Venue This Agreement and the rights of the parties hereunder shall be governed by and construed in accordance with the laws of the State of Oregon U S A without regard to the rules governing conflicts of law The state or federal courts of the State of Oregon located in either Multnomah or Lane counties shall have exclusive jurisdiction over all matters regarding this Agree ment except that Datalogic shall have the right at its absolute discretion to initiate proceedings in the courts of any other state country or territory in which End User resides or in which any of End User s assets are located 11 5 Attorneys Fees In the event an action is brought to enforce the terms and condi tions of this Agreement the prevailing party shall be entitled to reasonable attorneys fees both at trial and on appeal END Software Product Policy Datalogic reserves the right to ship its products with the latest version of software firmware available This provides our custom ers with the very latest in Datalogic software technology The only exception to this policy is when the buyer has a signed contract with Datalogic that clearly defines the terms and condi tions for making software firmware changes in products shipped
24. de Switzerland Supports only the interfaces listed in the Country Mode feature description Quick Reference Guide 31 Caps Lock State Caps Lock State This option specifies the format in which the reader sends charac ter data This applies to keyboard wedge interfaces This does not apply when an alternate key encoding keyboard is selected ENTER EXIT PROGRAMMING MODE Caps Lock State Caps Lock OFF Caps Lock State Caps Lock ON Caps Lock State AUTO Caps Lock Enable 32 Gryphon GM4100 Numlock Numlock This option specifies the setting of the Numbers Lock Numlock key while in keyboard wedge interface This only applies to alter nate key encoding interfaces It does not apply to USB keyboard ENTER EXIT PROGRAMMING MODE Numlock Numlock key unchanged Numlock Numlock key toggled Quick Reference Guide 33 Technical Specifications Technical Specifications The following table contains Physical and Performance Charac teristics User Environment and Regulatory information Item Description Physical Characteristics White Gray Black Gray Height 7 17 181 mm Dimensions Length 3 9 100 mm Width 2 87 71 mm Approximately Weight without cable 8 7 ounces 246 g reader with display 8 7 ounces 246 g base charger Color Electrical Characteristics Battery Type
25. e l limination des d chets lectroniques WEEE veuillez consulter le site internet www scanning datalogic com German Informationen zur Entsorgung von Elektro und Elektronik Altger ten WEEE erhalten Sie auf der Webseite www scanning datalogic com Spanish Si desea informaci n acerca de los procedimientos para el desecho de los residuos del equipo el ctrico y electr nico WEEE visite la p gina Web www scanning datalogic com Portuguese Para informa es sobre a disposi o de Sucatagem de Equipamentos El tricos e Eletronicos WEEE Waste Electrical and Electronic Equipment consultar o site web www scanning datalogic com Chinese HAAERBeJERRA ROI EAR WEEE NS 125 Datalogic nahi http www scanning datalogic com Japanese PESE UE TAS WE E E OMLBEIZOWN TO BE SER UE Datalogic D4 k www scanning datalogic com 4 CB FS UN har o Quick Reference Guide 43 Warranty Warranty Datalogic warrants to Customer that Datalogic s products will be free from defects in materials and workmanship for a period of 3 years from product shipment This war ranty does not extend to batteries and cables As consumable items batteries and cables carry a 90 day warranty from time of purchase for DOA dead on arrival defects In order to obtain service under this Warranty Customer must notify Data logic of the claimed defect before the expiration of the Warranty period and obtain from
26. er mounts only for horizontal mounting with lower retention of the scanner The different parts may be interchanged to customize retention preferences to change the mounts Do not allow it to touch the con OTE A tool such as a rigid pen or a flat screwdriver can be used tacts l Insert the appropriate parts for the desired base station position as shown below Horizontal Only Standing Horizontal or Vertical 12 Gryphon GM4100 Configuring the Base Station 2 3 Using your thumbs push open the plastic tabs on the bottom of the base to free the wing holders Tab i The stand can now be repositioned in either horizontal or standing position Ah Standing Horizontal Quick Reference Guide 13 Configuring the Base Station Connecting the Base Station Figure 1 shows how to connect the Base Station to a terminal PC or other host device Turn off the host before connection and con sult the manual for that eguipment if necessary before proceed ing Connect the interface cable before applying power to the Base Station Gryphon Mobile can also be Powered by the Terminal The external power supply is recommended but not necessary When powered by the Terminal the battery charger is automatically set as Slow charge Base Station Connection and Routing Fully insert the Power Ca ble and Interface I F Cable connectors into their respective ports in the underside of
27. erference to radio communications How ever there is no guarantee that interference will not occur in a par ticular installation If this equipment does cause harmful interference to radio or television reception which can be deter mined by turning the equipment off and on the user is encour aged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit differ ent from that to which the receiver is connected e Consult the dealer or an experienced radio or television technician for help FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits un der Specific Absorption Rate SAR tests for portable devices op erating closer than 20 cm to nearby persons set forth in an uncontrolled environment The Gryphon M4100 cordless imag ing reader has been demonstrated to meet these RF emissions safety limits Quick Reference Guide il Statement of Agency Compliance Canadian Notice This eguipment does not exceed the Class B limits for radio noise emissions as described in the Radio Interference Regulations of the Canadian Department of Communications Le present appareil numerique n emet pas de bruits radioelec triques depassant les limites applicables aux appareils numeriques de la classe B prescrites d
28. erty 5 3 The provisions of this Proprietary Information Section shall survive and con tinue for five 5 years after the termination of this Agreement 6 Limited Warranty 6 1 Datalogic warrants that under normal use and operation the Datalogic Prod uct will conform substantially to the applicable Documentation for the period specified in the Documentation During this period for all reproducible non conformities for which Datalogic has been given written notice Datalogic will use commercially reasonable efforts to remedy nonconformities verified by Datalogic End User agrees to supply Datalogic with all reasonably requested information and assistance necessary to help Datalogic in remedying such nonconformities For all defects reported to Datalogic within the warranty period Datalogic s liability is limited to providing End User with one copy of Corrections or responding to End User s problem reports according to Data logic s standard assistance practices Datalogic does not warrant that the prod uct will meet End User s requirements or that use of the product will be uninterrupted or error free or that Datalogic s remedial efforts will correct any nonconformance This limited warranty does not cover any product that have been subjected to damage or abuse whether intentionally accidentally or by neglect or to unauthorized repair or unauthorized installation and shall be void if End User modifies the product uses the product in an
29. es Supported Mea BRE with or w o Alternate Key PC XT IBM 3153 IBM Ter minals 31xx 32xx 34xx 37xx make only and make break keyboard Digital Terminals VT2x VT3xx VT4xx and Apple and Wand Emulation User Environment Operating Temperature 32 to 122 F 0 to 50 C Charging Temperature 32 to 104 F 0 to 40 C Storage Temperature 4 to 158 F 20 to 70 C EN a 2n Humidity Operating SUED 9096 relative humidity non condensing PIA Scanner withstands 18 drops from 1 8 meters Drop Specifications 5 9 feet to concrete Ambient Light Immunity Up to 100 000 Lux Contaminants Spray rain Dust particulates IEC 529 IP52 scanner only ESD Level 16 KV ing condition Charge Times are much lower when battery is within daily typical operat b Typical input current measured under factory default configuration c 13 mils DOF based on EAN All others are Code 39 All labels grade A typi cal environmental light 20 C label inclination 10 d Seelnterface Selection on page 22 for a listing of available interface sets by model type Quick Reference Guide Technical Specifications Item Description Regulatory Electrical Safety UL 60950 CSA C22 2 o 60950 IEC 60950 433 MHz model Europe CE Russia Gost Australia Ctick 910 MHz model USA Canada FCC IC China SRRG Pending
30. he appropriate barcode to select your system s correct interface type Configure Other Settings Additional programming barcodes are available in the Gryphon M I GD4100 GM4100 PRG to allow for customizing programming features If your installation requires different pro gramming than the standard factory default settings refer to the PRG Resetting Standard Product Defaults If you aren t sure what programming options are in your reader or you ve changed some options and want the factory settings re stored scan the Standard Product Default Settings barcode below to copy the factory configuration for the currently active interface to the current configuration Factory defaults are based on the interface type Con figure the reader for the correct interface before scan ning this label NOTE Standard Product Default Settings Quick Reference Guide 21 Interface Selection Interface Selection Each reader model will support one of the following sets of host interfaces General Purpose Models RS 232 RS 232 OPOS USB Key board Wedge Retail Point of Sale Models RS 232 RS 232 OPOS USB IBM 46XX Configuring the Interface Scan the programming barcode which selects the appropriate in terface type matching the system the reader will be connected to Next proceed to the corresponding chapter in the Gryphon T GD4100 GM4100 PRG to customize any settings and features associated with that interface Unli
31. ke some other programming features and options interface selections require that you scan only one programming barcode label DO NOT scan an ENTER EXIT barcode prior to scanning an interface selection barcode Some interfaces require the scanner to start in the dis NOTE abled state when powered up If additional scanner configuration is desired while in this state pull the trigger and hold for 5 seconds The scanner will change to a state that allows programming with barcodes RS 232 standard interface Select RS232 STD RS 232 Wincor Nixdorf Select RS232 WN 22 Gryphon GM4100 Interface Selection RS 232 for use with OPOS UPOS JavaPOS Select RS 232 OPOS USB Com to simulate RS 232 standard interface Select USB COM STD IBM 46xx Port 5B reader interface Select IBM P5B IBM 46xx Port 9B reader interface Select IBM P9B USB 0EM can be used for OPOS UPOS JavaPOS a Download the correct USB Com driver from www datalogic com Quick Reference Guide 23 Interface Selection AT PS 2 25 286 30 286 50 507 60 70 80 90 amp 95 w Standard Key Encoding Select KBD AT Keyboard Wedge for IBM AT PS2 e iie b encoding but without external Select KBD AT NK AT PS 2 25 286 30 286 50 507 60 70 80 90 amp 95 w Alternate K Select KBD AT ALT Keyboard Wedge for IBM AT PS2 with alternate key encoding but without exter nal keyboard Select KBD AT ALT
32. nging 3 replace the Datalogic Product with an equivalent product not subject to such claim or 4 provide End User an opportunity to return the Datalogic Product and receive a refund of the purchase price paid less a reasonable allowance for use 73 Datalogic shall have no liability to End User for claims of infringement based upon 1 the use of any Datalogic Product in combination with any product which Datalogic has not either furnished or authorized for use with such Data logic Product 2 the use of any Datalogic Product designed manufactured or modified to the specifications of End User or 3 End User s modification of the Datalogic Product without written authorization from Datalogic 74 THE FOREGOING STATES DATALOGIC S COMPLETE AND ENTIRE OBLIGATION CONCERNING CLAIMS OF PATENT COPYRIGHT OR OTHER INTELLECTUAL PROPERTY INFRINGEMENT CANCELS AND SUPERCEDES ANY PRIOR AGREE MENTS WHETHER ORAL OR WRITTEN BETWEEN THE PARTIES CONCERNING SUCH CLAIMS AND WILL NOT BE MODIFIED OR AMENDED BY ANY PAST CON TEMPORANEOUS OR FUTURE AGREEMENTS OR DEALINGS BETWEEN THE PAR TIES WHETHER ORAL OR WRITTEN EXCEPT AS SET FORTH IN A FUTURE WRITING SIGNED BY BOTH PARTIES 8 Limitation Of Liability EXCEPT AS PROVIDED IN SECTION 7 DATALOGIC SHALL NOT BE LIABLE FOR ANY CLAIMS AGAINST END USER BY ANY OTHER PARTY IN NO EVENT SHALL DATALOGIC S LIABILITY FOR DAMAGES IF ANY WHETHER BASED UPON CONTRACT TORT INCLUDING NEGLI GENCE PRODUCT LIABILITY
33. on series scanner product including all embedded Software in and all Documentation related to such product which has been purchased or otherwise acquired by End User whether obtained directly or indirectly from Datalogic 1 5 Software means any software or computer programs of Datalogic or its third party licensors in machine readable form which is embedded in the Datalogic Product whether obtained directly or indirectly from Datalogic including any replacement update upgrade enhancement or modification 2 Scope Of License Granted 2 1 Datalogic grants to End User a non exclusive non transferable perpetual license to use the Software solely on the Datalogic Product in which it is embedded designated Datalogic Product in machine readable form only solely for End User s internal business purposes This Agreement does not convey own ership of the Software to End User Title to the Software shall be and remain with Datalogic or the third party from whom Datalogic has obtained a licensed right As used in this Agreement the term purchase or its equivalents when applied to the Software shall mean acquire under license End User is not entitled to receipt or use of the source code to any Software 22 End User shall not copy modify decompile disassemble reverse engineer or otherwise reproduce or remanufacture the Software whether modified or unmodified nor sell assign sublicense distribute lend rent give or other
34. pack chargers and docks supplied by your Datalogic reseller CAUTION The use of any other power supplies can damage the device and void your warranty Do not disassemble or modify the battery The battery contains safety and protection devices which if dam aged may cause the battery to generate heat explode or ignite Do not place the battery in or near fire on stoves or other high temperature locations Do not place the battery in direct sunlight or use or store the battery inside cars in hot weather Doing so may cause the battery to generate heat explode or ignite Using the battery in this manner may also result in a loss of performance and a shortened life expec tancy Do not place the battery in microwave ovens high pres sure containers or on induction cookware Immediately discontinue use of the battery if while using charging or storing the battery the battery emits an unusual smell feels hot changes color or shape or appears abnormal in any other way Do not replace the battery pack when the device is turned on Do not remove or damage the battery pack label Do not use the battery pack if it is damaged in any part Battery pack usage by children should be supervised As with other types of batteries Lithium lon LI batteries will lose capacity over time Capacity deterioration is noticeable after one year of service whether the battery is in use or not It is difficult to precisely predict
35. plug the three screws securing the battery holder and unplug the white connector Connector Screw 10 Gryphon GM4100 Setting Up the Reader 3 Carefully lift out the gold contacts circuit and remove the battery holder while letting the white connector pass through the hole in the battery holder as shown in the picture below Pass through hole 4 Remove the old battery from its place if present and insert the new battery in the same position 5 Replace the battery holder plug in the connector and return the contacts circuit to its previous location When inserting the new battery into the handle take care to position the battery and the connector as shown NOTE 6 Insert the cover in the handle and screw it back into place Quick Reference Guide 11 Configuring the Base Station Configuring the Base Station The base charger station may be configured in desk application to hold the reader in two different positions either a horizontal or standing position in order to provide the most comfortable use depending on needs Standing Horizontal Changing the Base Station Position The base station is configured by installing one of two sets of me chanical parts that come with the cordless kit The default mounts shown below provide three options vertical wall mounting standing 45 or horizontal mounting with a higher mechanical retention ofthe scanner Use the oth
36. r other degradation will not be covered under the Warranty External power supplies returned for service must be accompa nied by the original product for performance of service Limitation of Liability Datalogic s REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCT AS SET FORTH ABOVE IS THE CUSTOMER S SOLE AND EXCLUSIVE REMEDY ON ACCOUNT OF CLAIMS OF BREACH OF WARRANTY OR PRODUCT DEFECT UNDER NO CIRCUMSTANCES WILL Dat alogic BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY LOST PROFITS OR ANY INCIDENTAL CONSEQUENTIAL IN DIRECT SPECIAL OR CONTINGENT DAMAGES REGARDLESS OF WHETHER Datalogic HAD ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES Assignment Customer may not assign or otherwise transfer its rights or obligations under War ranty except to a purchaser or transferee of product No attempted assignment or transfer in violation of this provision shall be valid or binding upon Datalogic Risk of Loss Customer shall bear risk of loss or damage for product in transit to Datalogic Data logic shall assume risk of loss or damage for product in Datalogic s possession or product being returned to Customer by Datalogic except such loss or damage as may be caused by the negligence of Customer its agents or employees In the absence of specific written instructions for the return of product to Customer Datalogic will select the carrier but Datalogic shall not thereby assume any liability in connection with the return shipment 44 Gryphon
37. ry using any device except for the scanner When the battery is used in devices other than the designated product it may damage the battery or reduce its life expectancy If the device WARNING causes an abnormal current to flow it may cause the battery to become hot explode or ignite and cause serious injury Lithium ion battery packs may get hot explode or ignite and cause serious injury if exposed to abusive conditions Be sure to follow the safety warnings listed below Do not place the battery pack in fire or heat Do not connect the positive terminal and nega tive terminal of the battery pack to each other with any metal object such as wire Do not carry or store the battery pack together with metal objects Do not pierce the battery pack with nails strike it with a hammer step on it or otherwise sub ject it to strong impacts or shocks Do not solder directly onto the battery pack Do not expose the battery pack to liquids or allow the battery to get wet Do not apply voltages to the battery pack con tacts In the event the battery pack leaks and the fluid gets into your eye do not rub the eye Rinse well with water and immediately seek medical care If left untreated the battery fluid could cause damage to the eye 8 Gryphon GM4100 Setting Up the Reader Always charge the battery at 32 104 F 0 40 C tem perature range Use only the authorized power supplies battery
38. s one error beep at Ended highest volume Indicates that a Gt host connection pena Limited Scan is not established N A hidhestire ning Label Read when the IBM or ka ana USB interface is APANG anabled rent volume Reader Active m si The LED is lit active and ready N A Mode steadily to scan Quick Reference Guide 37 LED and Beeper Indications INDICATION DESCRIPTION LED BEEPER Reader Disabled The reader has been disabled by the host The LED blinks continuously N A Green Spot is on continuously While in Stand Mode or Trigger Stand Mode the green spot shall be on while in stand watch state N A N A Green Spot flashes momen tarily Upon successful read of a label thesoftware shall turn the green spot on for the time specified by the configured value N A N A Programming Mode The following indications ONLY occu in Programming Mode r when the reader is Label Program A valid program LED blinks con Reader sounds ming Mode ming label has four low fre tinuously Entry been scanned quency beeps Label Program Leases ming Mode A label has been Due a N A lowest fre Rejection of rejected KARA Label kali rent volume In cases where multiple labels must be scanned Reader sounds Label Program to program one ue one short beep at ming Mode feature this indi N A highest fre Acceptance of cation
39. separate end user license agreement is licensed to you under the terms of that license agreement Datalogic and End User hereby agree as follows 1 Definitions 1 1 Affiliate means a business entity currently existing or later acquired that controls is controlled by or is under common control with Datalogic S p A 1 2 Documentation means materials such as user s guides program reference guides quick reference guides manuals or similar materials associated with or related to the Datalogic Product whether in printed online or other form 1 3 Proprietary Information means a source code object code software docu mentation and any related internal design system design data base design algorithms technology technical data or information implementation tech niques and trade secrets related to the Software b any other trade secrets marked appropriately or identified as proprietary or confidential and c any information that End User under the circumstances should recognize as confi dential Proprietary Information does not include any information that the receiving party can establish was 1 in the public domain 2 already in the receiving party s possession or rightfully known prior to receipt 3 rightfully learned from a third party not in violation of any other s proprietary rights or 4 independently developed without access to Proprietary Information 1 4 Datalogic Product means the Datalogic Gryph
40. the Base Station see Figure 1 Then connect to an AC Adapter and plug the AC power cord into the wall outlet Figure 1 Connecting the Base Station Wall plug Connector Noe Power Cord Base Station Securing the DC Power Cord Optional The DC power cord for the adapter can be secured to the bottom of the base in order to maximize the mechanical retention of the cable itself The routing of the power cord can be changed to ac commodate the base station positioning horizontal stand or wall mounting The cables can be looped around to the front of the Base Station or fed directly out the back of the Base Station as shown in Figure 2 on page 15 14 Gryphon GM4100 Configuring the Base Station Figure 2 Options for routing the DC cord Please refer to the arrows depicted on the bottom of the base when placing the cables detailed in Figure 3 Figure 3 Arrows showing routing Host Connection Verify before connection that the reader s cable type is compatible with your host eguipment Most connections plug directly into the host device as shown in Figure 4 on page 16 Keyboard Wedge interface cables have a Y connection where its female end mates with the male end of the cable from the key board and the remaining end at the keyboard port on the termi nal PC Quick Reference Guide 15 Configuring the Base Station Figure 4 Connecting to the Host
41. the HOST or the com munication with HOST is not established Yellow LED blinking 1Hz Data labels are transmitted to the HOST Yellow LEDs turned off for 100mSec Programming Mode Yellow LED blinks quickly Configuration alignment with the HH is in Red LED blinks quickly progress Battery charger in progress Red LED on Battery charger complete Green LED on Battery charger error Green LED and Red LEDs blink alternatively 1Hz No HH is placed on the cradle Red and Green LEDs off 40 Gryphon GM4100 Ergonomic Recommendations Ergonomic Recommendations In order to avoid or minimize the potential risk of ergo nomic injury follow the recommendations below Consult with your local Health amp Safety Manager to ensure that CAUTION A you are adhering to your company safety programs to prevent employee injury Reduce or eliminate repetitive motion Maintain a natural position Reduce or eliminate excessive force Keep objects that are used frequently within easy reach Perform tasks at correct heights Reduce or eliminate vibration e Reduce or eliminate direct pressure Provide adjustable workstations Provide adequate clearance Provide a suitable working environment Improve work procedures Regulatory Information All models are designed to be compliant with rules and regula tions in locations they are sold and will be labeled as required
42. wise transfer the Software to any other person or organization for purposes other than as expressly provided in this Agreement without Datalogic s prior written consent 3 Transfers Support 3 1 Any copying installing reproduction remanufacture reverse engineering electronic transfer or other use of the Software on other than the designated Datalogic Product will be a material breach of this Agreement However Data Quick Reference Guide 3 Statement of Agency Compliance logic may elect not to terminate this Agreement or the granted licenses but instead may elect to notify End User that End User is deemed to have ordered and accepted a license for each breaching use End User shall pay Datalogic the applicable list price for such licenses as of the date of such breach 3 2 End User shall not sell assign sublicense distribute lend rent give or other wise transfer the Datalogic Product to any third party unless such third party agrees with Datalogic in writing to be bound by the terms and conditions of this Agreement Any such transfer of the Datalogic Product absent such agree ment shall be null and void 33 End User may obtain support for Software from Datalogic at Datalogic s stan dard support fees and under Datalogic s standard support terms and condi tions in effect at the time the support is requested 4 Intellectual Property End User acknowledges that the Software constitutes valuable trade secrets of
43. y manner other than as established in the Documentation or if End User breaches any of the provisions of this Agreement 62 EXCEPT AS PROVIDED IN THIS AGREEMENT THE DATALOGIC PRODUCT IS PRO VIDED AS IS AND DATALOGIC MAKES NO WARRANTIES OF ANY KIND EXPRESS OR IMPLIED WRITTEN OR ORAL WITH RESPECT TO THE PRODUCT AND SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABIL ITY AND FITNESS FOR A PARTICULAR PURPOSE 7 Infringement 24 Datalogic will defend End User against any claim in a lawsuit that the Datalogic Product furnished hereunder infringe a United States patent or copyright of a third party and Datalogic will pay any damages finally awarded against End User by a court of competent jurisdiction that are attributable to such claim or will pay End User s part of any settlement that is attributable to such claim 4 Gryphon GM4100 Statement of Agency Compliance provided that 1 End User notifies Datalogic promptly in writing of the claim 2 Datalogic controls the defense or settlement of the claim and 3 End User cooperates fully with Datalogic in such defense or settlement All notices of a claim should be sent to Datalogic Scanning Inc Legal Department 959 Terry Street Eugene OR 97402 7 2 In the defense or settlement of any such claim Datalogic may at its option 1 procure for End User the right to continue using the Datalogic Product 2 modify the Datalogic Product so that it becomes non infri
Download Pdf Manuals
Related Search