Curtis KCR2614A Camcorder User Manual
Contents
1. C SE TIP OPERATION INSTRUCTIONS MODEL NO KCR2614A UNDER COUNTER CLOCK RADIO WITH 7INCHES ROTATING LCD TV IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions All the safety and operating instructions should be read before this product is operated 2 Keep these instructions The safety and operating instructions should be retained for future reference 3 Heed all warnings All warnings on the appliance and in the operating instructions should be adhered to 4 Follow all instructions All operating and use instructions should be followed 5 Do not use this apparatus near water The appliance should not be used near water or moisture for example in a wet basement or near a swimming pool and the like 6 Clean only with dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacture s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding plug A polarized plug has two blades with one wider than the other A grounding plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched parti2. if the menu is grey 5 1 TV AV Image Quality Adjustment Picture Mode Personal gt Contrast mem 50 Brightness mmm 50 Color mem 50 Sharpness mmm 50 Tint 4mm 0 aVUP DOWN hADJUST MENU EXIT Press MENU key to enter the menu list and then press left or right key to enter the above list Press up and down key to choose to enter the sub list press left and right key to adjust the numerical value or setup the contents then press Menu to confirm and return to previous list Press Menu again or press EXIT key on the remote controller to quit the sub menu list directly after the adjustment of image quality N Precautions There are four options of picture mode which are Personal Standard Dynamic and Soft Contrast adjust the black and white contrast of the image Brightness adjust the brightness of the image Sharpness adjust the sharpness of the image Tint adjust the red and green balance of the image Color adjust the color of the image 5 2 Sound Adjustment Sound Mode Bass Treble Balance Audio Language 4 UP DOWN ADJUST MENU EXIT Press MENU key to enter the menu list and then press left or right key to enter the above list Press up and down key to choose to enter the sub list press left and right key to adjust the numerical value or setup the contents then press Menu to confirm and return to previous list Press Menu again or press EXIT key on the remote controller t
3. 5V AAA type batteries for Clock Back Up 2 X 1 5V AAAtype batteries for remote control Jl C Ir INSTALLATION DIAGRAM Installation manual 2 Appearance 357 10 1 2468911 1213 1 Power key Standby On press to choose Standby or Turn on the machine 2 SKIP TUNE Radio tune downward adjust time 3 SKIP TUNE Radio tune upward adjust time 4 SNOOZE Has a rest 5 SOURCE Function mode choose Radio TV 6 TV AUX Shift between TV AUX on TV mode 7 CLOCK ALARM Display clock alarm setting time 8 BAND Shift between FM AM WB on radio mode 9 MEMORY ALERT Program memory Alarm Store station on FM AM mode 10 SLEEP Time setup of sleep off Press to set the off time then turn off the system automalically 11 MENU MONO Enter menu under TV AV mode and choose stereo mono under radio mode 12 IR position Remote receiving window 9 Lm 13 CH key Radio memory station increases TV channel increases direction choose alarm mode on the standby CH key Radio memory station decreases TV channel decreases direction choose alarm mode on the standby VOL key Volume decreases direction VOL key Volume increases direction 14 TIMER Calculagraph time setting 15 Loudspeaker 16 TFT LCD screen 18 19 23 20 21 22 17 clock back up house 18 External Right sound track 19 External Video 20 External Left sound track 21 External DC power inp
4. ON Audio language switch under ATSC mode press to switch current display program audio language only available when program supports multi languages 16 MUTE BUTTON Press to switch between mute and cancel mute from speaker 17 TV AUX Shift between TV and AUX on TV mode 18 SLEEP BUTTON Press to set up auto off anytime 19 SNOOZE BUTTON When alarm clock is operating press SNOOZE the alarm will operate again After 8 minutes 1 1 20 MEMORY ALERT BUTTON MEMORY ALERT under FM AM mode press to storage favour channels under STANDBY mode press to turn ON OFF WB weather band ALERT function 21 SKIP TUNE BUTTON Search key for radio under radio mode press to up search channels keep pressing to auto up search channels adjust time on clock mode 22 CLOCK BUTTON LCD time display press to display current time time for alarm clock 1 and alarm clock 2 keep pressing to adjust time alarm clock 1 alarm clock 2 use skip tune skip tune button to adjust time 23 VOL AND RIGHT BUTTON Volume and right under RADIO TV AV mode press to increase volume Adjust item when enter menu 24 CH AND DOWN BUTTON CHANNEL and down under RADIO TV mode press to channels Adjust item when enter menu 25 AUDIO MONO BUTTON Sound mode under TV mode press to set sound mode STANDARD MOVIE MUSIC AND PERSONAL under FM mode press to set audio out stereo or MONO 26 INFO BUTTON Under TV mode press to
5. ZER2 Radio2 TV2 on the standby mode 4 2 3 While setup timer Alarm 1 Alarm 2 at the same time turn on the gradation timer Alarm1 Alarm2 4 3 Snooze Close alarm 4 3 1 While the alarm ring press SNOOZE to pause it will ring after 8 minutes 4 3 2 While the alarm ring press POWER to stop it will ring at this time nest day 4 4 Sleep time setting Press SLEEP key to choose sleep time to be 90 80 10 minutes 4 5 Calculagraph Press TIMER key then press SKIP to adjust time of calculargraph Then press TIMER key to confirm 4 6 Radio operation 4 6 1 Press SOURCE key selected Radio press BAND to select FM AM WB 4 6 2 Press and hold SKIP to search station 4 6 3 Press SKIP TUNE to select stored station Press MEMORY ALERT MEMORY on remote Press CH to choose memory position Then press MEMORY ALERT MEMORY on remote to confirm 4 6 4 Press CH can choose the stored station 4 7 NOAA Standby or TV mode operation Press the MEMORY ALERT button ON OFF NOAA on the standby mode When NOAA mode setting ON status on the standby or TV mode once received the alert signal from National Oceanic and Atmospheric the alert alarm will be Automatically turned ON of this set press POWER button once to turn OFF the alert alarm and receive local weather broadcast channels Automatically 5 TV Menu Operation on the TV and AUX mode N Precautions It s unavailable
6. cularly at the plugs convenience receptacles and at the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Unplug the apparatus during lightning storms or when unused for long periods of time 13 Refer all servicing to qualified personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 14 Please keep the unit in a good ventilation environment 15 WARNING Do not install this equipment in a confined space such as a book case or similar unit The ventilation should not be impeded by covering the ventilation openings with items such as newspaper table cloths curtains etc 16 WARNING Please check the electrical and safety information on exterior bottom enclosure before operating the apparatus 17 WARNING To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall not be placed on apparatus 18 WARNING To prevent injury this apparatus must be securely attached to the floor wall in accordance with the installation instruction 19 WARNING The battery battery or batteries or battery pack shall not be exposed to e
7. display current program info 27 PRLIST BUTTON Press to display channels list under TV mode 28 FORMAT BUTTON Picture display format mode switch press to switch between AUTO 4 3 and WIDE 29 PICTURE BUTTON Picture mode press to select SOFT PERSONAL STANDARD DYNAMIC 30 amp JUMP BUTTON Press to switch from the current display program and the previous program under TV mode 31 EPG BUTTON Under ATSC mode press to display EPG info only available with the program support of EPG 4 Function Operation 4 1 Time setting b CLOCK 11 III u C CLOCK on remote LI LI SKIP TUNE SK P TUNE Press and hold Hour setting c d CO iom ALARM CLOCK on remote SKIP TUNE SKIP TUNE Press one time Minute setting CLOCK ALARM CLOCK on remote Press one time O SKIP TUNE SKIP TUNE Alarm 1 hour setting g h CLOCK RT A CLOCK on remote T m SKIP TUNE SKIP TUNE Press one time AL1 Alarm 1 minute setting i CLOCK OR ALARM CLOCK on remote SKIP TUNE SKIP TUNE Press one time CLOCK ALARM CLOCK on remote Press one time Alarm 2 hour setting SKIP TUNE SKIP TUNE Alarm 2 minute setting 4 2 Alarm setting 4 2 1 CH AL1 SET key on remote press to choose BUZZER1 Radio1 TV1 on the standby mode 4 2 2 CH AL2 SET key on remote press to choose BUZ
8. her the FM ANTENNA CABLE has Radio FM WB noise been adjusted properly and maybe the or no sound Radio FM WB signal weak Radio AM noise or Maybe the Radio AM signal weak no sound Whether the FM ANTENNA CABLE has NOAA no function been adjusted properly and maybe the WB signal weak 7 Technical Parameter Radio technical parameters Receiving frequence rang AM 520KHz 1710KHz FM 87 5MHz 108MHz WB 162 400MHz 162 425MHz 162 450MHz 162 4 5MHz 162 500MHz 162 525MHz 162 550MHz Step AM 10KHz FM 100KHz Sensitivity AMzx65dB FMzx23dB WB lt 2 H V Signal noise ratio AM 30dB FM240dB WB230dB TV technical parameters ATSC frequency 54MHz 803MHz NTSC receiving frequency 55 25MHz 801 25MHz TFT LCD screen technical parameters Screen picture mode 16 9 7 Resolution 1440 H X 234 V Technical parameters Power supply AC INPUT 120V 60Hz DC INPUT 12V 2A Audio output 1 5W lt 10 distortion Power Consumption lt 18W Outer Dimension 371mm 350mm 80mm Weight about 2800g NOTE Battery is for time backup only The clock and alarm memory will be retained during a power interruption During battery backup operation the display will not light up but the correct time will be maintained internally N Warning This manual is for reference only No further notice is made if there is any change of the information The authority of interpretation belongs to manufactory if there is any informati
9. le VUP DOWN ADJUST MENU EXIT 5 5 4 Channel Skip Settings Choose Channel Skip and press VOL to enter Skip item as following ENTER SELECT MENU EXIT Press VOL or VOL to close or open the current channel skip settings 5 5 5 Change Channel Number Choose Channel No as in the following picture Auto Scan Auto Scan Add CH Channel Skip Channel No 4 4 1 Channel Lable FD 3803 4vUP DOWN ADJUST MENU EXIT Press VOL or VOL to change current channel number 5 5 6 Change or Edit Program Name Choose Channel Label and press VOL to enter the following picture Alter the characters and numbers in the box to change the program name according to your preference as in the following picture 4vEDIT gt SELECT MENU EXIT 6 Before Repair The following phenomenons do not mean that the TV set has fault Please check it according to the following methods before repair Phenomenon Reason No image and sound The power switch is on the state of off Whether chosen the right channel auto No signal setup receiving channel again Whether the volume has been turned No sound down at the bottom signals too weak the mute function is working Whether the antenna has been adjusted Mosaic in the image properly and maybe the signals are too weak Whether the Antenna connect well Whether the brightness and contrast are OAR proper and please adjust again Whet
10. o quit the sub menu list directly after the adjustment of sound effect N Precautions There are four options of sound mode which are Personal Standard Movie and Music Bass adjust bourdon Treble adjust alt Balance adjust the balance between left and right sound track Audio Language can be setup as English French and Spanish only for ATSC Mode 5 3 Time Adjustment OSD Duration 15 Sec Time Zone Eastern Day Saving Time Off Clock 2006 05 02 14 40 avUP DOWN ADJUST MENU EXIT 9 Press MENU key to enter the menu list and then press left or right key to enter the above list Press up and down key to choose to enter the sub list press left and right key to adjust the numerical value or setup the contents then press Menu to confirm and return to previous list Press Menu again or press EXIT key on the remote controller to quit the sub menu list directly after the adjustment of time N Precautions 1 OSD Duration can be setup as 15Sec 30Sec 45Sec and 60Sec 2 Time Zone has seven areas to be chosen 3 Day Saving Time can be setup as Off or On Summer time off or on Clock 2006 05 02 14 00 shows the current program time 5 4 Settings Language English Transparency Off Color Mode Normal Closed Caption Restore Setting 4 UP DOWN ADJUST MENU EXIT Press MENU key to enter the menu list and then press left or right key to enter the above list Press up and down key to choose to enter
11. on is missing or not detailed Warning There is no component that can be repaired in the TV set Do not try to disassemble and improve the TV set There is high voltage inside and it is very dangerous The maintenance and adjustment work should be carried through by professional people 17
12. re Settings Press VOL Key the hint of Are you sure will show As in the following picture press YES or NO to choose whether restore or not and press or CH to confirm Are you sure 4 gt SELECT av CONFIRM 5 5 Program Searching Press MENU Key to enter the menu list press Left and Right Key to enter the following list press Up and Down Key to enter the sub list and then press Left and Right Key to setup the contents N Precautions There is no search menu under the AUX mode 5 5 1 1 Antenna can be setup as CATV and Air a0 3 8 4 CATV Auto Scan Auto Scan Add CH Channel Skip Channel No 4 Channel Lable av UP DOWN w w v w w MENU EXIT 49 ADJUST Antenna Auto Scan Auto Scan Add CH Channel Skip Channel No 4 4 1 Channel Lable FD 3803 4vUP DOWN ADJUST MENU EXIT 12 5 5 1 2 In the CATV state choose Auto scan and press OK to enter Cable system settings Four options AUTO STD IRC HRC can be chosen Cable System 4 AUTO Start to Scan gt avUP DOWN ADJUST MENU EXIT 5 5 2 In the Start to scan item press VOL to start searching Auto searching will clear the primary program Cable System Start to Scan avUP DOWN ADJUST MENU EXIT 5 5 3 Press Auto Scan Add Ch will start auto search based on primary program Antenna Auto Scan Auto Scan Add CH Channel Skip Channel No Channel Lab
13. the sub list press left and right key to setup the contents 5 4 1 OSD Language Settings Press Up and Down Key to choose Language and press Left and Right Key to choose among English French and Spanish 5 4 2 Menu State Settings Press UP and Down Key to choose Transparency and press Left and Right Key to choose Off menu transparency off or On menu transparency on 10 5 4 3 Color Auto adjustment Press Up and Down Key to choose Color Mode Press Left and Right Key to choose among Normal Warm and Cool 5 4 4 Closed Caption Settings Many TV programs contain closed caption information and the audience can see the caption in words on the screen Not all the channels at any time have closed caption code information Press Up and Down Key to choose Closed Caption and press Left and Right Key or ENTER Key to enter the following picture Off P CC Mode 4 Basic Selection 4 1 4 Advance Selection 4 Service1 4 4 UP DOWN 4 MENU EXIT There are three CC Modes which are Off closed caption off On closed caption always on when information is available and CC on Mute closed caption on when TV is in mute and closed caption off when TV is not in mute Basic Selection can choose among CC1 CC2 CC3 CCA Text1 Text2 Text3 and Text4 Advance Selection can choose among Service1 Service2 Service3 Service4 Serviced and Service6 Advance selection can be available only for ATSC mode 5 4 5 Resto
14. ut jack 22 External TV antenna input jack 23 FM ANTENNA CABLE 3 Remote Control Operation 1 POWER BUTTON Standby off press to switch between ON and STANDBY 2 SOURCE BUTTON System working mode press to switch RADIO ITV gt A 3 BAND BUTTON 6 m A Band switch under radio mode press to switch FM AM WB 4 TIMER BUTTON Press to enter timer setting mode use SKIP to adjust time then press TIMER to confirm time 11 setting 5 AL1 SET BUTTON Alarm clock 1 setting press to setup alarm mode BUZZER1 RADIO1 TV1 6 AL2 SET BUTTON Alarm clock 2 setting press to setup alarm mode BUZZER2 RADIO2 TV2 7 SKIP TUNE BUTTON Search key for radio under radio mode press to down search channels keep pressing to auto down search channels adjust time on clock mode 8 CH AND UP BUTTON CHANNEL and UP under RADIO TV mode press to channels Adjust item when enter menu 9 VOL AND LEFT BUTTON Volume and left under RADIO TV AV mode press to reduce volume Adjust item when enter menu 10 MENU BUTTON Press to enter exit menu 11 EXIT BUTTON Press to exit menu 12 Number 0 9 BUTTON Under TV mode press to select channels 13 BUTTON Press digit keys to select main channel number then press and insert second digit number key to select program directly 14 CC BUTTON CLOSED CAPTION ON OFF KEY under TV ATSC amp NTSC mode press to set CC mode ON OFF or CC ON MUTE CC ON for mute 15 MTS BUTT
15. xcessive heat such as sunshine fire or the like 20 WARNING The mains plug is used as disconnect device the disconnect device shall remain readily operable CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN 21 this lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non insulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock Warning To reduce the risk of electric shock do not remove cover or back as there are no user serviceable parts inside Refer servicing to qualified personnel The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance Double Insulation This is CLASS Il apparatus Table of Contents 1 Accessories ZADDECALANCE 2 3 Remote Control Application 4 Function Operation 000000 5 TV Menu Operation 6 Before Repair 7 Technical Parameter 1 Accessories Knighthead oooo Screws Remote control Operation Instructions 2 X 1
Download Pdf Manuals
Related Search