Clifford 520.4X Automobile Alarm User Manual
Contents
1. It should be borne in mind that when the oven door is opened the heating elements and the fan are automatically switched off This means that if the food being cooked needs to be checked it is best to leave the door open for as short a time as possible in order to avoid the temperature inside the oven from dropping too much and thus compromising cooking results 4 2 Oven lights The lights inside the oven come on automatically upon turning the thermostat knob 20 e Instructions for the user 4 3 Defrosting TIMER KNOB tl SET TO MANUAL kJ FUNCTION SWITCH THERMOSTAT SWITCH Q Moving air at ambient temperature causes frozen food to quickly thaw This type of thawing is ideal as the taste and appearance of the de frozen food whether previously deep frozen or frozen in the domestic freezer remain unaltered 4 4 Pre heating Before cooking it is advisable to pre heat the oven to the desired temperature for at least 15 minutes 4 5 Manual cooking TIMER KNOB ill SET TO MANUAL U THERMOSTAT KNOB Es 200 SET TO BETWEEN 50 AND 250 C The oven heats up as signalled by the orange light going on Upon the set temperature being reached the light goes off The orange light comes on and goes off various times during the cooking cycle indicating that the temperature in the oven is being kept constant 4 6 Timed cooking TIMER KNOB 30 SET TO BETWEEN 5 AND 60 Esi THERMOSTAT KNOB Es 200 SET TO BETWEEN 52. EQUIPMENT WEEE THIS GUIDELINE IS THE FRAME OF A EUROPEAN WIDE VALIDITY OF RETURN AND RECYCLING ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT BEFORE THE APPLIANCE IS PUT INTO OPERATION ALL THE LABELS AND PROTECTIVE FILMS APPLIED INSIDE OR OUTSIDE MUST BE REMOVED The manufacturer declines all responsibility for damage to persons or things caused by non observance of the above prescriptions or by interference with any part of the appliance or by the use of non original spares Instructions for the installer GBIE 2 INSTALLATION OF THE OVEN O The oven must be set up on a perfectly flat surface and left standing nen free Make sure to allow enough room at the back for easy access to the 4 terminal strip for connection of the power cable to mains Installation must be carried out by a qualified technician in compliance with applicable regulations in force AN Keep the appliance at least 5 cm from any walls at the sides and back 2 1 Electrical connection Make sure that the power line voltage matches the specifications ICE indicated on the rating plate located to the rear of the oven This rating OD plate must never be removed y SE IE TST The oven is supplied complete CONNECTION DIAGRAM with a HO7RN F _ three core DIAGRAMA DE LIGACODES supply cable for operation from a D PEREN 7 220 240V power supply aa cepa For operation from a 380 COMEETONDONE NTE TCTONY 415V2N or 380 415V3N power See supply the origin
3. GB IE Contents aa KR Oo DN gt 14 INSTRUCTIONS FOR SAFE AND PROPER USE INSTALLATION OF THE OVEN DESCRIPTION OF CONTROLS USE OF THE OVEN CLEANING AND MAINTENANCE EXTRAORDINARY MAINTENANCE and carry out an inspection test and maintenance of the appliance 15 17 19 20 22 24 INSTRUCTIONS FOR THE INSTALLER these are intended for the qualified technician who must install the appliance set it functioning INSTRUCTIONS FOR THE USER these contain user advice description of the commands and the correct procedures for cleaning Introduction GB IE 1 INSTRUCTIONS FOR SAFE AND PROPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE OVEN WE ADVISE READING THIS MANUAL AND ALL THE INSTRUCTIONS THEREIN BEFORE USING THE OVEN INSTALLATION MUST BE CARRIED OUT BY QUALIFIED ENGINEERS IN ACCORDANCE WITH THE REGULATIONS IN FORCE THIS OVEN IS INTENDED FOR COMMERCIAL USES AND CONFORMS TO CURRENT REGULATIONS IN FORCE THE APPLIANCE HAS BEEN BUILT TO CARRY OUT THE FOLLOWING FUNCTIONS COOKING AND HEATING UP OF FOOD ALL OTHER USES ARE CONSIDERED IMPROPER THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USE DO NOT LEAVE THE PACKING IN THE HOME ENVIRONMENT SEPARATE THE VARIOUS WASTE MATERIALS AND TAKE THEM TO THE NEAREST SPECIAL GARBAGE COLLECTION CENTRE IT IS OBLIGATORY FOR T
4. and insert the pins supplied into the holes from the inside Close the door to an angle of about 45 and lift it off To SS reassemble fit the hinges into their grooves then lower the door into place and extract the pins 6 3 Oven door seal To permit thorough cleaning of the oven the seal may be removed Before removing the seal take off the door as described above Once the door has been taken off lift the tabs at the corners as shown in the figure 24
5. in perfect condition clean it regularly at the end of R the work day Allow to cool first Take off all removable parts LEA Remove the side guides by lifting them up from the front slide them out of the rear hole and take off EN e Clean oven grill and side guides with warm water and non abrasive detergents Rinse and dry e Clean the inside walls of the oven with a soft cloth soaked in an ammonia solution rinse and dry In case of persistent spots or drip offs place an ammonia imbibed cloth on the bottom of the oven close the door and after a few hours wash the oven with warm water and a liquid detergent Rinse and dry 5 3 Door glass The door glass should always be kept clean Use absorbent kitchen paper to clean In case of tough spots clean with a damp sponge using regular detergent 23 PN GB E Instructions for the user 6 EXTRAORDINARY MAINTENANCE The oven may require extraordinary maintenance or replacement of parts subject to wear such as seals bulbs and so on The following instructions describe how to carry out these minor maintenance operations Before any intervention disconnect the power supply of the oven Q 6 1 Replacing the light bulb Remove protection cover A using a screwdriver to pry open Replace bulb B with a similar one Remount protection cover A A Use only oven light bulbs suitable for a temperature of up to S 300 C U ww 6 2 Removing the door Open the door completely
6. 0 AND 250 C The oven heats up as signalled by the orange light going on Upon the set temperature being reached the light goes off The orange light comes on and goes off various times during the cooking cycle indicating that the temperature in the oven is being kept constant Upon completion of the cooking cycle the oven automatically turns off the green light comes on and the buzzer sounds for a few seconds To completely turn off set the thermostat knob to 0 21 GB IE Instructions for the user ome 5 CLEANING AND MAINTENANCE Important never spray water directly on to the oven Never use pressure nozzles Before any intervention disconnect the power supply of the oven 5 1 Cleaning stainless steel parts amp 3 To maintain stainless steel parts in perfect condition clean regularly at K ee the end of the work day Allow to cool first A To clean and preserve the stainless steel surfaces always use only specific products that do not contain abrasives or chlorine based acids How to use pour the product on a damp cloth and wipe the surface rinse thoroughly and dry with a soft cloth or deerskin Do not use metallic sponges or sharp scrapers they will damage the surface Use normal non abrasive products for steel and a wooden or plastic tool if necessary Rinse thoroughly and dry with a soft cloth or deerskin 22 Instructions for the user GBHE 5 2 Cleaning the inside of the oven R To maintain the oven
7. HE ELECTRICAL SYSTEM TO BE GROUNDED ACCORDING TO THE METHODS REQUIRED BY SAFETY RULES WHEN LINKING UP TO MAINS BY PLUG AND SOCKET MAKE SURE THAT BOTH ARE COMPATIBLE AND CONNECT BY MEANS OF A POWER CABLE COMPLYING WITH APPLICABLE REGULATIONS THE SOCKET MUST BE ACCESSIBLE AFTER THE APPLIANCE HAS BEEN BUILT IN NEVER UNPLUG BY PULLING ON THE CABLE DO NOT OBSTRUCT VENTILATION OPENINGS AND HEAT DISPERSAL SLITS IMMEDIATELY AFTER INSTALLATION CARRY OUT A BRIEF INSPECTION TEST OF THE OVEN FOLLOWING THE INSTRUCTIONS BELOW SHOULD THE APPLIANCE NOT FUNCTION DISCONNECT IT FROM THE SUPPLY AND CALL THE NEAREST TECHNICAL ASSISTANCE CENTRE NEVER ATTEMPT TO REPAIR THE APPLIANCE ALWAYS CHECK THAT THE CONTROL KNOBS ARE IN THE 0 OFF POSITION WHEN YOU FINISH USING THE OVEN 15 16 Introduction NEVER PUT INFLAMMABLE OBJECTS IN THE OVEN THEY COULD BE ACCIDENTALLY LIGHTED AND CAUSE FIRES THE I D PLATE WITH TECHNICAL DATA REGISTRATION NUMBER AND BRAND NAME IS LOCATED IN AN EXPOSED POSITION AT THE REAR OF THE OVEN THE PLATE MUST NOT BE REMOVED THE APPLIANCE IS INTENDED FOR COMMERCIAL USE BY APPROPRIATELY TRAINED PERSONNEL CHILDREN SHOULD ALWAYS BE KEPT OUT OF ITS REACH AND NEVER BE ALLOWED TO PLAY WITH IT BEFORE USE THE OVEN DISHES MUST BE WASHED WITH A SUITABLE DISHWASHING DETERGENT DO NOT USE ABRASIVE PRODUCTS THIS APPLIANCE IS MARKED ACCORDING TO THE EUROPEAN DIRECTIVE 2002 96 EC ON WASTE ELECTRICAL AND ELECTRONIC
8. al cable must be replaced and the terminal ee board connections modified E accordingly For access to the terminal board remove the door located at the back of the oven 400 415V 2N 1234s The standard cable is of the three core 3x 220 240V 4mm 4 mm HO7RN F type _ For operation from a 380 415V2N o 380 415V3N power supply replace the standard pomm cable with one of the HO7RN F type The cross section of the leads of the latter cable 380 415V2N mm must not be less than 2 5 1 5 mn 4 x 2 5 mn 5 x 1 5 mn the ground yellow green q of the termination to be linked up to the oven must be at least 20 mm longer 20mm 380 415V3N 5 mr E 20 mm 17 GB IE Co 18 Instructions for the installer If connecting by plug and socket make sure to use a 25 Amp three core plug or a 16 Amp five core plug in case of operation at 380 415V2N or 380 415V3N Make sure that plug and wall socket are of the same type and are in conformity with regulations in force Also check that the power supply line is provided with adequate earthing Avoid using adapters or shunters In case of permanent connection ensure that power cable is equipped with an easily accessible omnipolar switch fitted in proximity to the apparatus and with a gap between contacts equal to or greater than 3 mm 2 1 1 Safety thermostat The oven is fitted with a safety device which trips in case of serious
9. malfunction To reset contact the nearest servicing centre The manufacturer declines all responsibility for damage to persons or things caused by non observance of the above prescriptions or by interference with any part of the oven 2 2 Levelling Adjust the four feet so as to set the oven on a perfectly level plane For this purpose loosen the lock nut and unscrew the foot The range of adjustment of the screw is 10 mm 2 3 Steam exhaust pipe An exhaust pipe is fitted on the back of the oven to allow the discharge of steam during cooking Make sure that it s no way obstructed and take care do not crush it Instructions for the user GB E 3 DESCRIPTION OF CONTROLS qTTTTrTiTiiiiitiiiiti es ao L All oven knobs and controls are located on the side panels 4 j 2 1 TIMER KNOB This permits to select manual or timer controlled cooking with automatic turning off of the oven at end of the cooking cycle To set to manual turn the knob anticlockwise to To set cooking time turn the knob clockwise Time is expressed in minutes 5 to 60 Adjustment is progressive so that time can also be set to any intermediate value Upon completion of the cooking cycle the knob automatically returns to 0 the oven turns off and a buzzer signal is set off which switches off automatically after 20 seconds 2 GREEN LIGHT This light is off when the oven is in standby condition all oO knobs on 0 It illuminates when the
10. selector knob is turned to any function E FUNCTION SWITCH KNOB Rotate the knob in either direction to select desired function from the following O NO FUNCTION SET OVEN LIGHT GRILL ELEMENT VENTILATION UPPER AND LOWER LOWER HEATING ELEMENT i 11 3 I 3 HEATING ELEMENT VENTILATION GRILL ELEMENT VENTILATED HEATING ELEMENT 4 ORANGE LIGHT When on indicates that oven is heating up When the set D temperature is reached the light goes off During the cooking 19 GB E Instructions for the user cycle the light comes on and goes off various times signalling that the temperature in the oven is being kept constant as per the set value B THERMOSTAT KNOB This permits selection of the ideal cooking temperature Rotate clockwise to the desired temperature 50 to 250 C Adjustment is progressive so that the oven also operates at any intermediate value 4 USE OF THE OVEN During cooking do not cover the bottom of the oven with aluminium or tin foil and do not place pans or oven trays on it as this may damage the enamel coating If you wish to use greaseproof paper place it so that it will not interfere with the hot air circulation inside the oven Keep the oven door closed during cooking gt gt 4 1 Warnings and general advice When using for the first time it is advisable to heat up the oven to its maximum temperature 250 C for enough time to burn off any possible oily manufacturing residues
Download Pdf Manuals
Related Search