Home

Casio DT-X5 Computer Hardware User Manual

1. Preface A new industrial handheld terminal has been developed CASIO introduces the DT X5 series of handheld terminal with built in SH 3 32 bit RISC type Processor high speed laser scanner and diverse wireless LAN communications via Bluetooth as standard and IEEE802 11b WLAN model dependent Running under Microsoft Windows CE NET4 1 operating system the rugged DT X5 is designed specifically for industrial applications This reference manual will explain about the hardware specifications and the details for the Laser integrated models DT X5M10E DT X5M IOR and the C MOS imager integrated models DT X5M30E DT X5M30R DT X5M30U and the dedicated options only For software and library related references refer to the respective reference manuals released on the CASIO WEB site at http www casio co jp English system 1 1 Overview Features Incorporates NET technology Uses WindowsCE NET 4 1 operating system Makes effective use of NET resources developed by other parties Employment of Embedded OS makes it possible to build a flexible WindowsCE system Enhanced communicating functions Built in Bluetooth Ver 1 1 module The transfer rate of the Wireless LAN model dependent is 5 Mbps which is the maximum rate of communication for peer to peer connection with PC over IEEE802 11b The following protocol stacks are available for Bluetooth interface GAP Generic Acc
2. Fig 14 Refer to Table 1 4 Names of parts in the following page for each part and its description Table 1 4 Names of parts No Name Description 1 Indicator 1 This indicator is green when charging is completed and red during charging 2 Indicator 2 This indicator is green when the bar code has been read successfully and red when a reading error has occurred 3 LCD panel Displays text operating instructions and so forth 4 Power key Switches the power on and off press for about one second 5 Lkey This is pressed to move the cursor to the left 6 R key This is pressed to move the cursor to the right 7 Cursor key This functions in mainly the same manner as the cursor keys on a PC It is used when selecting items or scrolling the screen up and down and so on 8 Multi key This can be set to perform arbitrary functions 9 Numeric keys These are pressed to input numbers and letters 10 ENT key This is pressed after entering a value or when advancing to the next step 11 Function keys These keys can be assigned functions other than the functions for reading bar codes They are initially assigned the following default settings Fl _ Deletes one characters to the left F2 _ Inputs a hyphen F3 Inputs a period gt F4 _ Toggles to switch between numbers and alphabets uppercase F5 Inputs a space F6 _
3. Table 4 2 Ttem Specification Condition Temperature Operation 0 C to 40 C Storage 10 C to 50 C Humidity Operation 30 to 80 RH No condensation Storage 30 to 90 RH No condensation Storage in carton box Temperature 10 C to 50 C Humidity 30 to 90 RH Dust and water splash proof Not applicable 37 4 1 3 HA A34AT Table 4 3 Item Specification Condition Temperature Operation 0 C to 40 C Storage 40 C to 85 C Humidity Operation 30 to 80 RH No condensation Storage 30 to 95 RH No condensation Storage in carton box Temperature 10 C to 50 C Humidity 30 to 90 RH 4 1 4 DT 5022CHG Table 4 4 Ttem Specification Condition Operation Oto 40 C Non operation 10 to 50 C When battery is not charged Storage 10 to 55 C With carton box Operation 20 to 90 RH no condensation Storage 20 to 90 RH no condensation With carton box 4 1 5 HA A20BAT DT 5025LBAT Table 4 5 Item Specification Condition Operation 0 to 40 C Non operation 5 to 50 C When battery is not charged Storage 10 to 55 C With carton box Operation 20 to 90 RH no condensation Storage 20 to 90 RH no condensation With carton box 38 4 2 Electrical Performances 4 2 1 DT X5 Table 4 6 Ttem Specification Remark DC1 1A 3 0V to 5V F
4. Table 2 15 Item Specification Input terminals for joint block 1 VIN2 Rated DC16V Input voltage 8 to 20V 2 VIN3 Rated DC16V Input voltage 8 to 20V 3 NC NC 4 GND GND ut terminals for joint block 1 VOUTI DC16V Output terminal from 1 unit when AC adaptor is used 2 VOUT2 DC16V Output terminal from 2 unit 3 NC NC 4 GND GND No of joint able units 3 units x DT 5022CHG Power Supply Block Table 2 16 Item Specification Input Rated voltage DC 16V Input voltage DC 8 0 to 20V Rated output Rated output voltage DC 4 22V Rated output current DC 1 600 mA Input consumption current Input consumption current 0 65A When input voltage is at 16V Charge output terminal CH1 PIN1 4 22V4 PIN2 GND Charge output terminal CH2 PIN1 4 22V4 PIN2 GND Input terminal DC jack Rated DC16V input voltage DC 8 0 to 20 0V 32 Battery Charge Block Table 2 17 Specification Charge control Output voltage DC4 22V 30mV Charge current standard mode DC1 600mA 10 Charge current standby mode DC160 40mA Full charge detection current DC120 30mA Voltage control Full charge detection voltage 4 1V Re charge detection voltage 4 0V Re charge detection voltage DC4 0 0 1V Input voltage DC8 0 to 20V Timer Charge timer standby mode 90 minutes Charge timer sta
5. Model Product HA A61IO Bridge Satellite Cradle HA A601IO Bridge Basic Cradle HA A34AT Battery Charger Car Mount Unit HA A30CHG Cradle type Battery Charger DT 5022CHG Dual Battery Charger HA A20BAT Battery Pack 1 700 mAH 3 7V DT 5025LBAT Large capacity Battery Pack 3 400 mAH 3 7V AD S42120AE AC Adaptor Input range 100 to 240 VAC AD S45150AU AC Adaptor Input range 100 to 230VAC With US power cord For DT 5022CHG AD S45150AE AC Adaptor Input range 100 to 230VAC With European and US power cords For DT 5022CHG MPC 577ADPE AC Adaptor See note MPC 577ADPG DT 827CAC Car Power Cable DT 891WH Wall Mount Unit DT 887AXA RS 232C cross cable Cable length 1 5 m 9 pin male DT 882RSC RS 232C cross cable 25 pin male DT 883RSC RS 232C cross cable 25 pin female DT 888RSC RS 422 modular cable Cable length 1 0 m DT 380USB USB cable Cable length 2 0 m Note MPC 577 ADPE and MPC 577ADPG are phased out as of August 2006 The successor models are AD S45150AE and AD S45150AG The accessories in the table below are accompanied as accessory in each individual carton box of DT XS Table 1 3 Accessory Product Remark AA size Alkaline battery For DT XSM10E M30E and M30U only Alkaline battery holder For DT XSM10E M30E and M30U only Wrist strap Large capacity battery pack cover For DT 5025LBAT Battery pack cover For DT X5M10E M30E and M30U only User s guide in English and Chinese 1 2
6. White Readable 7 times or more per 10 scanning Readable range Fig 2 2 25 2 2 HA A60I0 HA A61I0 Table 2 7 Specification Standard IrDA Ver 1 1 compatible Comm method Half duplex Synchronization Start stop method Comm speed 4 Mbps maximum Standard USB Ver 1 1 compatible Comm speed 12 Mbps maximum Connector 4 3 USB connector type B Comm method Full duplex Synchronization Start stop method Comm speed 115 2 Kbps SG_ER SD RD CD O O O O O O O O CS RS B D Sub 9 pin Male Applicable to HA 61IO only Comm method Full duplex Synchronization Start stop method Comm speed 115 2 Kbps Applicable to HA A61IO only Connector OUT BERR 6 TEE RJ 45 compatible 6 pins No of LEDs 3 HA A6110 2 HA A60IO Status LED No of display colors 2 red green Display content System operation status LINE Comm status DATA Power status POWER Refer to Chapter 2 6 Status Indication With LEDs DIP switch HA A61IO only 8 switches See page 30 Detection switch for DT X5 Push switch Continue Input voltage DC 12V 5 Input from AC adaptor Consumption current DC12V Approx 3 5A While supplying power or transmitting data Plug EIAJ RC 5320
7. 2D PDF417 6 mil 0 168 mm Stacked 8 mil 0 20 mm Liner Code39 10 mil 0 25 mm tacked PDF417 10 mil 0 25 mm d t 110 mm from the LED emission port iner Code39 10 mil 0 25mm t 110 mm from the LED emission port Stacked PDF417 10 mil 0 25 mm At 110 mm from the LED emission port Pitch Skew d i At 110 mm from the LED emission port Liner Code39 10 mil 0 25 mm l Atl0mm from the LED emission port Stacked PDF417 10 mil 0 25 mm t 110 mm from the LED emission port Liner Code39 10 mil 0 25 mm 0 45 or greater Stacked PDF417 10 mil 0 25 mm 0 45 or greater Surrounding illumination 100 to 100 000 Lux Visible angle V_Angle 26 H Angle 35 Operating temperature Image sensor High temperature 50 C Low temperature 10 C 24 Basic scanning conditions Test chart Resolution PCS Read judgment Depth Pitch angle Skew angle Tilt angle Surrounding temperature Surrounding humidity Surrounding illumination Background of the symbol Conditional Judgment C Max readable digits B Recommended readable digits A Max readable digits in close Dedicated test pattem 1D 2D Stacked 1D 0 25 mm 2D 0 5 mm 0 9 or greater 7 times per 10 scans First Decode 110 mm from the LED emission port a 0 degree B 10 degree y 0 degree 25 C 30 to 50 450 to 550 Lux
8. 26 mm 35 degree Curb JAN 8 digits 0 26 mm R215 mm JAN 13 digits 0 26 mm R gt 20 mm PCS 0 45 or more Ambient light immunity Sunlight 80 000 Lux or less Laser beam swing angle Code39 0 25 mm 44 degree Scanning width 60 mm At contact 355 mm At 400 mm depth Basic scanning conditions Test chart Dedicated test pattem PCS 0 9 or greater Depth 80 mm from the laser emission port Pitch angle 0 degree Skew angle 15 degree Tilt angle 0 degree Surrounding temperature 25 C Surrounding illumination 500 to 900 Lux Background of the bar code Black 22 Oto 400 Fig 2 1 0 to 200 1 0 0 25 0 33 0 5 Resolution 23 2 1 2 Reference for C MOS Imager Performance Reference of the C MOS imager performances below for the DT X5M30E DT X5M30R and DT X5M30U is provided as a guide to be utilized by the user The user can refer to these reference values in the table for his or her specific business application All the reference values have been came out from the assessment tests carried out under the basic performance conditions below However it does not necessarily imply that the values are guaranteed and optimum to any kind of business applications They are intended for use by the user as a reference only Table 2 6 No of read digits Symbology Resolution Range mm i B Recommended 6 mil 0 15 mm 70 to 195 8 mil 0 20 mm 13 mil 0 33 mm 40 mil 1 0 mm UPC 3 mil 0 33 mm
9. Functions similar to the Tab key on a PC Used to move items for input or selection F7 _ Functions similar to the Tab key on a PC Used to move items for input or selection but moves the opposite to F6 F8 __ Notset 12 IR port This port is used for IR communication with another terminal or the Bridge Satellite Cradle 13 Power contacts Contact points for supplying power from the Bridge Satellite Cradle and Cradle type Battery Charger 14 CLR key This is pressed to clear the contents of all key inputs 15 Fnkey This is used to make various settings or start up preliminary registered applications by pressing in combination with a function key or numeric key Fn and keys Switches the backlight on and off Fn and 2 keys Darkens the contrast Fn and 3 keys Lightens the contrast 16 Battery pack cover Slide these switches when opening and closing the battery cover lock switches 17 R Trigger key This key is used to read bar codes It is also pressed when performing a full reset 18 LTngger key This key is used to read bar codes It is also pressed when canceling a full reset 19 Wrist strap hook This is used when attaching the wrist strap 20 Reset switch This is pressed to reset the terminal 21 Battery pack cover Covers the compartment that holds the battery pack or AA size alkaline batteries 22 Barcodereaderport Laser light is emitted from this port to read bar codes Laser scanner integrated models only LED lig
10. for transfer of system data and file data Use of the USB port requires installation of a special driver on the PC 14 1 3 3 DT 5022CHG Dual Battery Charger Views Charge status indicators Battery pack compartments Dual charger connection terminals Connection attachments Fig 1 7 1 3 4 HA A20BAT and DT 5025LBAT Battery Packs Views HA A20BAT DT 5025LBAT Charge Power Charge Power supply supply terminals terminals weak Fig 1 8 2 Hardware Specifications 2 1 DT X5 Table 2 1 Item Specification Remark CPU Memory CPU SH3 32 bit RISC type Operating system Microsoft Windows CE NET Ver 4 1 RAM 16 MB user area approx 7 5 MB FROM OS 32 MB FROM Storage 32 MB user area approx 30 MB Laser scanner Method Semi conductor laser Laser emitting window Redirected downward at 60 degrees Wave length 650 10 nm Output power Less than 1 mW Scanning speed 10020 scans per second Resolution 0 127 mm PCS 0 45 or more Depth 0 contact to 400 mm Readable width 355 mm at 400 mm See Chapter 2 1 1 on page 22 Readable symbologies See Table 2 3 on page 20 Ambient light immunity Indoor 3 000 fluorescent Lux or less Outdoor 80 000 Lux or less C MOS imager Method 300 000 pixels monochrome
11. will be subjected to oily smoke or vapor Otherwise a fire or electric shock may occur 3 Donot place the DT X5 in an unstable situation such as on a wobbling platform or shelf It may fall and cause personal injury 4 Donot throw the DT XS into a fire This may cause a fire or personal injury due to explosion of the terminal 50
12. with multiple Access Points Bluetooth Standard Bluetooth Version 1 1 Comm range Approx 5 m Output power Maximum 3 dBm PowerClass 2 Wake up function Available Buzzer Sound pressure 75 dB or more Vibrator Available Power Operating battery Lithium ion battery pack x 1 pc or AA size alkaline battery x 2 pes See Table 2 2 Memory backup battery Lithium battery rechargeable on board Battery life See Table 2 2 Battery capacity HA A20BAT 1 700 mAH DT 5025LBAT 3 400 mAH Backup period Operating battery and memory backup battery Continue Power with AA size Alkaline battery RAM Approx 120 days RTC Approx 145 days Power with HA A20BAT RAM Approx 100 days RTC Approx 125 days Power with DT 5025LBAT RAM Approx 175 days RTC Approx 200 days 18 Conditions Lithium ion battery pack HA A20BAT or DT 5025LBAT is fully charged AA sized alkaline batteries are brand new The memory backup battery is fully charged The surrounding temperature is room temperature Note 2 Lithium ion battery HA A20BAT Approx 5 hours Conditions pack charge time DT 5025LBAT Approx 10 hours The power switch is tumed off The lithium ion battery pack is a brand new The surrounding temperature is at room temperature Memory backup battery Approx 4 days Condit
13. 022CHG Table 4 9 Item Specification Remark Anti static strength ESD method 250 pF 100 ohm Malfunction Probe Finger type Destruction Polarity 4 2 5 HA A20BAT DT 5025LBAT Table 4 10 Item Specification Remark Anti static strength ESD method 250 pF 100 ohm Malfunction Probe Finger type Destruction Polarity 40 4 3 Mechanical Performances 4 3 1 DT X5 Table 4 11 Ttem Specification Condition Resistance to drop impact height Tn bare condition 180 cm Onto concrete one time on each of the 6 sides and 4 comers In individual carton box 70 cm or less Onto concrete one time on each of the 6 sides 1 Tn master carton box 70 cm or less corner 3 edges Resistance to vibration 1 5 Gor less 10 to 55 Hz In X Y and Z directions Reciprocally for 30 minutes 4 3 2 HA A60IO HA A6110 HA A30CHG Table 4 12 Item Specification Condition Resistance to vibration 1 5 Gor less 10 to 55 Hz In X Y and Z directions Reciprocally for 30 minutes Resistance to vibration 1 5 Gor less 10 to 55 Hz in package In X Y and Z directions Reciprocally for 30 minutes Resistance to impact Tn bare condition 70 cm One time for 6 faces onto concrete surface In individual carton box 70 em or less One time for 6 faces 1 corner and 3 edges In master carton box 50 cm or less 4 3 3 DT 5022CHG Table 4 13 Item Specification Condition
14. 1 35 4 Quality References This chapter describes about references of the DT X5 and its dedicated options concerned with environmental performance compliance mechanical and electric durability etc 4 1 Environmental Performances 4 1 1 DT X5 Table 4 1 Ttem Specification Condition Temperature Operation 20 C to 50 C 0 to 40 C while mounting on Cradle Non operation 20 C to 70 C Humidity Operation 10 to 80 RH No condensation Non operation 5 to 90 RH No condensation Storage in carton box Temperature 20 C to 60 C Humidity 90 RH or less Dust and water splash proof IP54 level compliant with IEC60529 All covers on the terminal See IP Industrial Protection code are closed while testing IP Industrial Protection code A cording system to indicate the degrees of protection provided by an enclosure against access to hazardous parts ingress of solid foreign objects ingress of water and to give additional protection in connection with such protection Elements of the IP54 level and their meanings are as follows IP5x Represents dust proof to level 5 This level of IP code means that the terminal is protected against solid foreign objects including dust to penetrate the enclosure IPx4 Represents water splash proof to level 4 No detrimental effect is observed even with exposure to water splashed from any direction 36 4 1 2 HA A60IO HA A6110 HA A30CHG
15. 1 Options And Interfaces A DT X5 IrDA Printer Recommended Option Yon USB i IrDA Ver 1 1 Bridge Basic Cradle HA A60IO AC Adaptor AD S42120AE USB Bridge Satellite RS 232C Cradle RS 422 RS 422 HA A6110 AC Adaptor Bridge Satellite AD S42120AE Cradle Power Supply made a Cradle type Battery Terminals Built in Battery Betas Charge Circuit AC Adaptor AC Adaptor AD S42120AE AD S42120AE Battery Charger Car Mount Unit HA A34AT Car Power Cable DT 827CAC Access Point WLAN Z Recommended IEEE802 11b Option Bluetooth Module Bluetooth Equipment Ver 1 1Class2 Z Recommended oe Option Battery Pack Battery Pack HA A20BAT HA A20BAT Large capacity Large capacity Battery Pack Battery Pack DT 5025LBAT DT 5025LBAT Dual Battery Dual Battery Charger Charger DT 5022CHG DT 5022CHG AC Adaptor AD S45150AU AD S45150AE Fig 1 2 1 3 General Guide Views for DT X5M10E DT X5M10R T2 Fig 1 3 Note The front view in Fig 1 3 is for all the models of DT X5 series Views for side and back of DT X5M30E DT X5M30U and DT X5M30R
16. 42120AE Weight Dimensions Table 2 12 Configuration Output voltage DC5V 10 Output current 1 500 mA maximum Charge method Constant voltage With current curb function Charge time Approx 4 hours For HA A20BAT Approx 8 hours For DT 5025LBAT Power contact 8 8 Power contact GND Specification The illustration of the power contact on the left is viewed at the front of the charger In desktop configuration Approx 510 g configuration In wall mount Approx 600 g Note The dimensions include the DT 891 WH Wall Mount Unit attached to HA A30CHG In desktop configuration Approx 110 W x 125 D x 128 H mm configuration In wall mount 29 Approx 110 W x 148 D x 153 H mm See note 2 5 DIP Switch Setting for HA A6110 The DIP switch is located on the rear side of the Bridge Satellite Cradle Change the ON OFF settings according to your required system configuration The new settings do not go into effect until the power switch is turned off and then back on again ON Upper side OFF Lower side Not used Always set to OFF Not used Always set to OFF Host computer interface Interface 6 RS 232C Termination setting for daisy chain connection At middle No chain Termination Connection mode With Host PC Communicati
17. A Class 4 Center pin plus AC adaptor AD S42120AE Output voltage DC 5V 10 Output current 1 500 mA maximum Charge method Charge supply power Constant voltage With curb function on current Charge time Approx 4 0 hours For HA A20BAT Approx 8 0 hours For DT 5025LBAT The illustration of the power contact on the left is viewed GND at the front of the cradle Power contact Power contact Weight Dimensions Table 2 8 Model no Configuration Specification Weight In desktop state Approx 530 g In wall mount state Approx 620 g Dimensions In desktop state Approx 110 W x 125 D x 128 H mm In wall mount state Approx 110 W x 148 D x 153 H mm Weight In desktop state Approx 520 g In wall mount state Approx 610 g Dimensions In desktop state Approx 110 W x 125 D x 128 H mm In wall mount state Approx 110 W x 148 D x 153 H mm HA A61IO HA A60IO 27 2 3 HA A34AT Table 2 9 Specification Remark Status LED No of LEDs 1 No of display colors 2 In red and green Display content Power status POWER Indicates the status of terminal being mounted on the charger OFF Flashing in green Flashing in red Power is off Power is on and the terminal is mounted on the charger Power is on but the terminal is not mounted
18. DT X5 Series Hardware Manual Version 1 04 CASIO Computer Co Ltd Copyright 2006 All rights reserved September 2006 Chapter Chapter Chapter Chapter 1 1 1 1 2 1 2 1 1 3 1 3 1 1 3 2 1 3 3 1 3 4 2 1 Table of Contents Editorial Record Preface Overview Features Available Models and Options Options and Interfaces General Guide HA A34AT Car Mounted Battery Charger HA A61I0 HA 60I0 Cradles DT 5022CHG Dual Battery Charger HA A20BAT DT 5025LBAT Battery Packs Hardware Specifications DT X5 Reference for Laser Scanner Performance Reference for C MOS Imager Performance HA A61I0 HA A61I0 HA A34AT HA A30CHG DIP Switch Setting for HA A61IO Status Indication with LEDs DT 5022CHG HA A20BAT DT 5025LBAT Product Identification and Reference Numbers Quality References Environment Performances DT X5 HA A6110 HA A30CHG HA A34AT DT 5022CHG HA A20BAT DT 5025LBAT Electric Performances DT X5 HA A6110 HA A30CHG HA A34AT DT 5022CHG HA A20BAT DT 5025LBAT Mechanical Performances DT X5 HA A6110 HA A30CHG DT 5022CHG HA A20BAT DT 5025LBAT Reliability DT X5 HA A6110 HA A30CHG DT 5022CHG Compliance DT X5 HA A6110 HA A30CHG AD S42120AE Chapter 5 Cable Specifications 45 5 1 For Chain Connection and Short Length 45 5 2 For Chain Connection and Long Length 46 Chapter 6 Precautions 47 6 1 Handling Precautions 47 6 2 Safety 48 6 2 1 Battery Pack 48 6 2 2 Gene
19. Emitting window Redirected downward at 20 degree Resolution 1D 0 15 mm Stacked 0 169 mm PCS 1D 0 45 or greater Stacked 2D 0 45 or greater Depth 1D 40 to 410 mm Stacked 2D 50 to 250 mm Readable width 240 mm at 410 mm See Chapter 2 1 2 on page 24 Readable symbology Stacked code symbologies See Table 2 4 on page 21 Display Display device Monochrome FSTN LCD No of dots 128 w x 160 h Dot pitch 0 3 w x 0 3 h mm Scale 4 grades Display fonts Tahoma Courier New CA gothic Winding MS gothic Backlight LED Indicator Confirmation Status 2 pes x LED in red and green Continue 17 Input Keyboard Cursor up and down key L and R keys Ten keys 0 to 9 Fn key Multi key Function keys F1 to F8 Control keys Power key Reset switch Trigger keys 2 pcs on the left and right sides IrDA Standard IrDA Version 1 1 Method Half duplex Synchronization Start stop frame synchronization Baud rate 9600 115200 4 Mbps Comm range 0 contact to 0 3 m WLAN Standard TEEE802 11b Modulation Direct sequence spread spectrum DSSS Frequency range 2 400 to 2 483 5 MHz For DT X5M10R DT X5M30R Baud rate 11 Mbps maximum Comm range 150 m outdoor 50 m indoor Note 1 No of channels 11 for FCC 13 for ETSI Output power Minimum 12 5 dBm Maximum 16 0 dBm Other feature Roaming
20. Resistance to vibration 1 Gor less 10 to 55 Hz In X Y and Z directions Reciprocally for 30 minutes Resistance to vibration 2 Gor less 10 to 55 Hz in package In X Y and Z directions Reciprocally for 15 minutes Resistance to impact In bare condition 75cm 6 faces 1 corner and 3 edges In individual carton box 75 cm or less 6 faces 1 comer and 3 edges 41 4 3 4 HA A20BAT DT 5025LBAT Table 4 14 Ttem Specification Condition Resistance to vibration 1 5 Gor less 10 to 55 Hz In X Y and Z directions Reciprocally for 30 minutes Resistance to impact In bare condition 100 cm 6 faces 4 edges onto P tile Tn individual carton box 70 cm or less 6 faces 3 edges 1 corner onto P tile 42 4 4 Reliability 4 4 1 DT X5 Table 4 15 Specification Remark Condition Service life Backlight 10 000 hours At half life period Laser scanner 10 000 hours C MOS imager 70 000 hours Trigger keys 1 000 000 times For each trigger key Other keys 500 000 times Mounting removing of the 10 000 times terminal to from the Cradle MTBF 62 413 hours Electronic parts only MTBF WLAN module 27 000 hours Charging and discharging cycle of 300 times or more Applicable to HA A20BAT and battery pack DT 5025LBAT see notes Note The number of the cycles is assumed with the conditions below e The remained capacity of battery pack at the 300 cycles i
21. ate Note that the capacity after the battery if it is not used for 10 days at 60 C will be 65 and that after 20 days at 60 C will be 55 47 6 2 Safety 6 2 1 Battery Pack Never disassemble or retrofit the battery pack The battery pack has safety mechanism and protection means incorporated to avoid hazards Should they be damaged the battery pack could become hot generate smoke explode or ignite Never contact the and terminals with metal objects such as a wire Also do not carry or store the battery with a metal necklace or hair pin Otherwise the battery pack may be short circuited resulting in an excessive current and causing the battery to become hot smoke explode or catch fire Neither dispose of the battery pack into a fire nor heat it The insulation may be burnt the gas exhaust valve or safety mechanism may be damaged or the internal electrolyte may ignite causing the battery pack to become hot smoke explode or ignite Neither leave nor use the battery pack in a place with a high temperature over 80 C or close to a fire or hot stove Should the resin separator be damaged due to excessive heat the battery pack may be short circuited causing it to become heated smoke explode or ignite Do not soak the battery pack in fresh water or sea water If the protection means incorporated in the battery pack is damaged the battery pack may become hot smoke explode or ignite Do not attempt to charg
22. battery pack use only dedicated cradles or dedicated battery charger and its AC adaptor available from CASIO at a temperature between 0 C and 40 C If the battery pack is charged with battery chargers other than those specified by CASIO it may be over charged or charged with an excessive current or have abnormal chemical reactions induced causing it to become hot smoke explode or ignite The battery pack has a specific polarity Do not force it into the DT X5 Check the polarity Ifthe battery pack is connected backwards it can be incorrectly charged and have an abnormal chemical reaction induced causing it to become hot smoke explode or ignite If the internal electrolyte of the battery pack leaks and enters the eye do not rub the eye Rinse the eye with a sufficient amount of clean water such as tap water then immediately consult with a doctor The electrolyte can cause eye damage 48 6 2 2 General Be aware of abnormal conditions If the DT X5 is continuously used in an abnormal condition a fire or electric shock may occur If there is an abnormality immediately tum off the Power switch and be sure to remove the batteries and then contact a CASIO distributor for repair Supply Current Voltage Do not use the AC adaptor with an AC voltage not rated on the AC adaptor Also avoid drawing power from an outlet used for multiple devices This may cause fire or an electric shock Handling the power cable Do not damage br
23. ble compatible with SK UTP 100M3P by Sanyo Industrial Co Fig 5 3 Pin layout diagram of cable for chain connection and long distance pin to pin straight twist pair connection Wiring Cradle at lower Cradle at higher position under the position under the chain connection chain connection 46 6 Precautions 6 1 Handling Precautions Precautions for short term storage 1 to 2 days Ifthe DT X5 is to be stored over holidays including Saturday and Sunday replace the battery pack or AA size alkaline batteries with brand new one before starting the holiday This will conserve the built in memory backup battery and ensure retention of data on the terminal If there is a possibility of the above or operator error e g a fully charged battery has not been inserted practice system operation that maintains a backup to avoid loss of data due to consumption of the batteries Precautions for long term storage over one week Prior to long term storage over one week always back up data in the terminal to other memory storage device In addition remove the lithium ion battery pack or AA size alkaline batteries before storage This can minimize overly discharging the installed battery and minimize consumption of the memory backup battery Do not store the removed battery pack or AA size alkaline batteries at high temperature Otherwise it will discharge at an accelerated r
24. discharge Discharge end voltage 2 75V 2 75V Standard charge current LOCAEL55A 0to40 C 1 6A 0 to 50 C Charge voltage 4 2 0 05V 4 2 0 05V Charge hour standard mode 2 5 hours 5 0 hours Charge on DT 5022CHG Weight Approx 45 g Approx 87g Dimensions 57 L x 37 W x 13 H mm 34 57 L x 37 W x 24 H mm Product Identification and Reference Numbers On the back of the terminal and its options major options only there is a bar code and numbers printed on label as shown in Fig 3 1 below This bar code is represented by 15 digits of Code128 and by alphanumeric characters beneath the bar code The numbers from 1 to 9 in the figure represent identification and references of the terminal The numbers from 10 to 14 represent a manufacturing reference which is reserved by the manufacturer See the figure below for each meaning 1 23 45 6 7 8 9 10 11 12 13 14 15 Serial number of the Manufacturing references terminal in 5 digits reserved by the manufacturer Production month of the year 1 to 9 A B C Production year last digit only Ex 1 represents the year 2001 Model number two digits in alphanumeric 81 82 83 84 86 87 88 72 73 DT X5 Domestic version DT X5 Domestic version DT XS5M10E DT XSMIOR DT X5M30E DT X5M30U DT X5M30R HA A61IO HA A601IO Fig 3
25. e the battery close to a fire in direct sunlight or in a car parked in the sun A heated battery pack will trigger the internal hazard protection means to stop the charging function Or the protection means may be damaged and the battery may be charged with an excessive current or voltage or have abnormal chemical reactions induced to cause it to become hot smoke explode or ignite Do not stick a pin or nail in the battery pack Neither hit it with a hammer nor stamp it If this is done the battery pack may be broken or deformed resulting in a short circuit and causing it to become hot smoke explode or ignite Do not hit or throw the battery pack If the protection means incorporated in the battery pack is damaged the battery pack may be charged with an excessive current or voltage or have abnormal chemical reactions induced to cause it to become hot smoke explode or ignite Never use a battery pack that is significantly damaged or deformed It may become hot smoke explosion or ignite Do not attempt to solder anything directly on the battery pack surface The insulation may be damaged or the gas exhaust valve or safety mechanism may be damaged causing the battery pack to become hot smoke explode or ignite Do not use the battery pack in other device than the DT X5 The performance or service life of the battery pack may be reduced or abnormal current may flow to cause it to become hot smoke explode or ignite When charging the
26. eak retrofit bend twist or stretch the power cable Also do not place a heavy object on it or heat it If this is done the power cable may be broken and cause a fire or electric shock AC adaptor Always use the dedicated AC adaptor Ifan AC adaptor that is not specified is used the battery pack may explode causing a fire or personal injury Do not touch the AC adaptor with wet hands This may result in an electric shock Also place the AC adaptor in a place where it is not subject to dust and water Dust and dirt may cause fire and smoke and water may cause an electric shock About the electrolyte If the intemal electrolyte of the battery leaks and enters the eye rinse it with a sufficient amount of water then consult with a doctor About the battery pack 1 Do not place the battery pack in a microwave oven or high pressure container If this is done the battery pack will be quickly heated or the contact seal may be broken causing it to become hot smoke explode or ignite 2 Ifyou are aware of an abnormal condition such as a smell excessive heat discoloration deformation etc during use charging and storage of the battery pack immediately remove it from the DT X5 and do not use it anymore If it continuously used without proper treatment the battery pack may become hot smoke explode or ignite 3 If charging cannot be completed even after the specified charging period stop the charging operation Otherwise the batt
27. ery pack may become hot smoke explode or ignite 4 Ifthe battery pack leaks or generates an abnormal smell immediately remove it away from the fire Otherwise the electrolyte that has leaked may ignite causing smoke an explosion or fire 5 Do not disassemble the battery pack Neither disassemble nor retrofit this terminal Personal burns or injury may occur About the power cable and AC adaptor 1 Donotbring the power cable close to heating equipment such as stove The cable coating may burn or melt resulting in fire or electric shock 2 Do not bring the power cable close to a container filled with liquid If the cable becomes wet or should the container be tipped over a fire or electric shock may result 3 Do not unplug the AC adaptor by pulling the power cable by hand The cable may be damaged causing a fire or electric shock Always hold the plug of the cable 4 When cradle or battery charger is not used for an extended period of time e g during absences unplug the AC adaptor from the wall outlet 49 About the battery l Do not attempt to disassemble or solder the battery Also do not heat or throw the battery into a fire 2 When the button type battery memory backup battery used in this terminal is removed exercise care so as not to accidentally swallow it Remain aware of the danger to infants Store the button type battery in an infant safe location Should the battery be swallowed immediately consult a doc
28. ess Profile SDP Service Discovery Profile SPS Serial Port Dialup Network File Transfer Security function WEP 128 bits Superb reading capability With the installed high speed laser scanner DT X5M10E DT X5M10R it is possible to read any industrial 1D bar code symbologies Multi step read function With the installed C MOS imager DT X5M30E DT X5M30R DT X5M30U it is possible to read the most widely used 2D symbologies as well as the industrial standard D symbologies Support of outstanding development environment Ample Microsoft development tools provided for easy application development and an advanced debug environment 1 2 Available Models and Options Table 1 1 Models of DT X5 series Wireless LAN ting batt Model IEEE802 11b Bluetooth OE De DT X5M10E No Yes Lithium ion Alkaline DTXSMIOR ETSI Yes Lithium ion DT X5M30E No Yes Lithium ion Alkaline DT X5M30R ETSI Yes Lithium ion DT XSM30U No Yes Lithium ion Alkaline TEEE802 11b WLAN module compliant with IEEE802 11b is integrated as standard Bluetooth Bluetooth Version 1 1 module is integrated as standard C MOS Capable to scan 1D 2D symbologies and to capture images Laser Capable to scan 1D symbologies Lithium ion Lithium ion battery pack HA A20BAT or DT 5025LBAT only Alkaline AA size alkaline battery x 2 pcs Table 1 2 Options
29. hts are emitted from this port to read bar codes and stacked 2D codes C MOS integrated models only 23 Buzzer Produces a buzzer tone 24 Maintenance This is used when performing maintenance and repairs This cover should connector cover normally not be opened 11 1 3 1 HA A34AT Battery Charger Car Mount Unit View POWER i Power Indicator Lamp Power Contacts Power Switch Car power code jack Remove button Fig 1 5 Note The view in Fig 1 5 shows HA A34AT Battery Charger Car Mount Unit with HA A30CHG Cradle type Battery Charger integrated to it 1 3 2 HA A6110 and HA A60I0 Cradles Back 12 13 1415 Refer to Table 1 5 Names of parts in the following page for each part name and its description Table 1 5 Names of parts Part Name Description IR port This port transfers data with the terminal IR port non contact communication Terminal detect switch This switch detects when the terminal is not seated correctly on the Cradle Power contacts Power is supplied to the terminal via these contacts Fall protector This is a removal attachment that prevents the terminal from tipping over and falling Power indicator lamp This lamp indicates the mounting status of the terminal Off Power off Green _ Power on the terminal mounted correctly Red Power on the terminal not mounted Communication indicator lamp This lamp shows when the termi
30. ions charge time Lithium ion battery pack is installed The surrounding temperature is at aroom temperature Dimensions Approx 54 W x 179 D x 21 4 H mm Note 4 Weight DT XSMIOE M30E Approx 245 g Note 5 M30U DT X5M10R M30R Approx 250 g Notes 1 Concurrent use of WLAN communication and Bluetooth communication is not recommended 2 Each memory backup period will depend on the characteristic of the terminal itself the surroundings including temperature humidity Thus the periods described in Table 2 1 are recommended for use for reference only They are not guaranteed figures 3 Backup for both data in RAM and the RTC built in clock will commence when the battery pack either HA A20BAT or DT 5025LBAT runs down 4 Any protruding part on the terminal is not measured 5 _ Each weight includes the lithium ion battery pack HA A20BAT installed The strap is excluded 19 Table 2 2 Operating hours by model WLAN Scan Operating Model TEERSOZ D engine Patery hour OPDE moods Alkaline batteries Approx 200 Scanning 2 times per 10 DT X5M10E No Laser HA A20BAT Approx 90 seconds DT 5025LBAT Approx 180 HA A20BAT Approx 90 Scanning 2 times per 10 DT 5025LBAT Approx 180 seconds HA A20BAT Approx 15 Wait RF scan 6 5 2 1 5 poe us Laser DT 5025LBAT Approx 30 HA A20BAT Approx 20 Wait RF scan calculation DT 5025LBAT A
31. liance Standard Europe USA EN55022 1998 A 1 2000 Class B FCC Part 15B Class B EN55024 1998 A 1 2001 Class B EN60950 UL60950 3 Edition 2000 4 5 3 AD S42120AE AD S45150AU AD S45150AE Table 4 21 Compliance Standard Europe USA EN60950 1991 2 edition UL1950 3 Edition 44 5 Cable Specifications 5 1 For Chain Connection and Short Length Length 1 meter or less View from side View from top Maxmimum 123456 com ppatible with 6 6 6FR SYK Sabyo 123456 Cable see Table 5 1 Table 5 1 Specifications of the cable Fig 5 1 Core wire Conductor 20 0 1A Insulator Semi hard material PV C Finish of external shape 20 0 1A Sheath Insulator PVC Finish of external shape 04 3 0 lmm Characteristics Conductance resistance 0 120hm m or less Insulation resistance 50Mohm or more Pin layout diagram of cable for chain connection and short distance pin to pin straight connection Wiring Cradle at lower position under the chain connection Cradle at higher position under the chain connection 5 2 For Chain Connection and Long Length Length 1 meter or longer View from side 1 Max 1 000m View from top 123456 1234S Modular plug compatible with 6 6 6 FR SYK50 by Sanyo Industrial Co Ca
32. nal is performing communication Off No communication being performed Green flashing Communication in progress Red Problem with a connection between two Bridge Satellite Cradles System status indicator lamp This lamp indicates whether the system is operating normally Regardless of whether or not the terminal is mounted this lamp indicates the system status and whether or not a communication operation with the system can be performed Off System is not operating Green System is operating Desktop unit This is the base when using the Cradle in a desktop configuration Remove the desktop unit in the case of a wall mount configuration DIP switches HA A6IIO only Use these switches to configure the Bridge Satellite Cradle as required Power switch Turns the power on and off Wall mount unit fastening plate The holes in this plate accept screws that secure the wall mount unit in place AC adaptor jack Connect the AC adaptor here sold separately to supply power RS 422 port HA A61IO only This port is used when connecting to another Bridge Satellite Cradle RS 232C port HA A61IO only This port accepts connection of an RS 232C cable for connection to a computer for transfer of system data and file data Use of the RS 232C port requires installation of a special driver on the PC USB port This port accepts connection of a USB cable for connection to a computer
33. ndard mode 720 minutes Trickle charge timer 120 minutes e hour HA A20BAT Approx 2 5 hours for 1 pack Approx 5 0 hours for 2 packs at same time At 0 to 40 C DT 5025LBAT Approx 5 0 hours for 1 pack Approx 10 0 hours for 2 packs at same time At 0 to 40 C Temperature control Not available No of charge outputs 1 Operation mode Battery pack mount detection Battery pack not mounted LED OFF charge output OFF Battery pack mounted LED ON in red charge output OFF Check on battery pack LED ON in red charge output OFF Battery charge standby mode LED ON in red charge output ON Battery charge standard mode LED ON in red charge output ON Wait mode in trickle charge LED ON in green charge output OFF Charge in trickle mode LED ON in green charge output ON Charge completed LED ON in green charge output OFF Charge abnormal end LED flash in red charge output OFF Priority order of battery charging Weight Dimensions Table 2 18 Order in mounted order Specification Weight Approx 154 g Dimensions 100 L x 110 W x 49 H mm 33 2 8 HA A20BAT DT 5025LBAT Table 2 19 Item Specification HA A20BAT DT 5025LBAT Remark Rated capacity 1 700 mAH 3 400 mAH 0 2C discharge Rated voltage 3 7V 3 7V 0 2C
34. on speed between Cradles 115 200bps Default setting Fig 2 3 Note Other DIP switch settings are used for testing and inspection purposes Because of this you should never use any DIP settings other than those described above 30 2 6 Status Indications with LEDs Various operational statuses on the HA A611IO can be displayed using the LEDs The following table describes LED modes and their meanings Table 2 13 Ttem Specification Remark LED Power status indicator POWER Power off Off Power is on and the terminal is mounted correctly Green Power is on but the terminal is not mounted correctly Red 2 color LED Comm status indicator DATA HA A61LIO only No communication being performed Off Communication is in progress Problem with a connection between two Bridge Satellite Cradles 2 color LED Line status indicator LINE System is not operating System is operating 31 2 color LED 2 7 DT 5022CHG Basic Block Table 2 14 Item Specification Remark Basic function Rechargeable battery pack HA A20BAT Battery pack 1 700 mAH Dedicated batteries only DT 5025LBAT Large capacity size battery pack 3 400 mAH AC adaptor AD S45150AU Input 100 to 230VAC With US power cord AD S45150AE Input 100 to 230VAC With European power cord Interface Block
35. on the charger Detection switch for the terminal Push switch Input from AC adaptor Input voltage DC 12V 24V 5 Consumption current DC 12V Approx 1 400 mA While supplying DC 24V Approx 700 mA power Plug EIAJ RC 5320A Class 4 Center plus Power cord DT 827CAC Charge supply power Weight Dimensions Table 2 10 Output voltage DC 5V 10 Output current 2 500 mA maximum Charge method Constant voltage With curb function on current Charge time Approx 4 0 hours For HA A20BAT Approx 8 0 hours For DT 5025LBAT Power supply terminals Specification 88 8 Power supply GND terminals The illustration of the power supply terminals on the left is viewed at the front of the charger Remark Approx 840 g When configured with HA A30CHG Approx 111 W x 243 D x 104 H mm 28 When configured with HA A30CHG 2 4 HA A30CHG Table 2 11 Ttem Specification Remark Status LED No of LEDs 1 No of display colors 2 In red and green Display content Power status POWER Detection switch for DT X5 Push switch Input from AC adaptor Input voltage DC 12V 5 Consumption current Approx 3 5A While supplying power or transmitting data Plug EIAJ RC 5320A Class 4 Center plus AC adaptor AD S
36. or DT X5M10E Powered DC1 3A 3 0V to 5V For DT X5M30E DT X5M30U DC1 4A 3 7V to 5V For DT X5M10R DC1 6A 3 7V to 5V For DT X5M30R Anti static strength Malfunction 4 KV contact 8 KV in air Compliant with EN6100 4 2 Destruction 12 KV 4 2 2 HA A60IO HA A6110 HA A30CHG Table 4 7 Item Specification Remark Approx 0 02 A DC12V HA A60IO Approx 0 15 A DC12V HA A611O0 When the terminal is not mounted on Current Approx 0 02 A DC12V HA A30CHG consumption Approx 0 9 A DC12V HA A60IO Approx 1 0 A DC12V HA A61IO While supplying power or transmitting data Approx 0 9 A DC12V HA A30CHG DC12V 5 HA A60IO bbl DC12V 5 HA A611O DC12 or 24V 5 HA A30CHG DC24V for HA A30CHG is only when HA A34AT Battery Charger Car Mount Unit is attached to it Anti static strength Malfunction 6 KV 150 pF 330 ohm Destruction 12 KV Line noise strength 1 000 V Pulse width 5 KHz Malfunction Burst cycle 300 milliseconds No of pulses 75 pcs Burst period 15 milliseconds Power interruption 10 milliseconds or less 4 2 3 HA A34AT Table 4 8 Ttem Specification Remark Consumption current DC 12V Approx 1 400 mA DC 24V Approx 700 mA While supplying power Voltage DC 12V 24V 5 Anti static strength Malfunction t6 KV Destruction t12 KV 150 pF 330 ohm 39 4 2 4 DT 5
37. pprox 40 20 1 1 1 Alkaline batteries Approx 42 Scanning 2 times per 10 en a No C MOS HA A20BAT Approx 40 seconds DT 5025LBAT Approx 80 HA A20BAT Approx 40 Scanning 2 times per 10 DT 5025LBAT Approx 80 seconds HA A20BAT Approx 15 Wait RF scan 6 5 2 1 5 ee bce CMOS DE5025LBAT Approx 30 HA A20BAT Approx 20 Wait RF scan calculation DT 5025LBAT Approx 40 20 1 1 1 Notes e The durations of time in Operating hour for DT X5M10R have been measured in the WLAN configuration with Cisco Aironet 1100 Access Point These time durations may become different if other Access Point is employed e The durations of time in Operating hour are measured under the conditions that new battery pack or new alkaline batteries is used the surrounding temperature is at 25 C and the dedicated test program is used e Inthe low temperature the operating hour powered by battery tends to be shorter Table 2 3 Readable 1D bar code symbologies Symbology Output format Append function EAN8 JAN8 2 digit 5 digit addon EAN13 JAN13 2 digit 5 digit addon UPCA NS output 2 digit 5 digit addon UPCE NS output UPCA conversion 2 digit 5 digit addon Code39 Start stop output ASCII conversion Codabar NW7 Start stop bit output Interleaved 2of5 ITF Code93 Code128 Code sets A B Code set C MSI Plessey IATA Codel 1 RSS 14 Standa
38. ral 49 CASIO is a registered trademark of CASIO Computer Co Ltd in Japan Other product names or company names in this reference manual are either trademarks or registered trademarks of their respective owners No part of this document may be produced or transmitted in any form or by any means electronic or mechanical for any purpose without the express written permission of CASIO Computer Co Ltd in Tokyo Japan Information in this document is subject to change without advance notice CASIO Computer Co Ltd makes no representations or warranties with respect to the contents or use of this manual and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose 2006 CASIO Computer Co Ltd All rights reserved Editorial Record Version Date edited Page Content no 0 90 March 2004 Tentative version 1 00 August 2004 Original version 1 01 September 2004 36 The content in Table 4 11 of Chapter 4 has been updated 1 02 February 2005 all The description about C MOS imager has been added 1 03 August 2006 7 The content in Table 1 2 of Chapter 1 2 is updated 9 The content in Fig 1 2 of Chapter 1 2 1 is corrected 32 The content in Table 2 14 of Chapter 2 7 is updated 1 04 September 2006 7 The description about the phased out AC adaptors MPC 577ADPE and MPC 577ADPG are added in Table 1 2 of Chapter 1 2
39. rd Truncated RSS Limited RSS Expanded Standard ISBT Industrial2of5 IDF 20 Table 2 4 Readable 2D stacked code symbologies Symbology Output format Append function Code49 PDF417 MicroPDF Codablock F EAN8 13 Composite RSS Composite UCC EAN128 Composite TLC39 RSS 14 Stacked type Stacked Stacked Omnidirectional RSS Expanded Stacked type Stacked 21 2 1 1 Reference for Laser Scanner Performance Reference of the laser scanner performances below for the DI X5M10E DT X5M10R is provided as a guide to be utilized by the user The user can refer to these reference values in the table for his or her specific business application All the reference values have been came out from the assessment tests carried out under the basic performance conditions below However it does not necessarily imply that the values are guaranteed and optimum to any kind of business applications They are intended for use by the user as a reference only Table 2 5 Symbology Specification Remark Depth Code39 0 127 mm 0 to 50 mm 0 15 mm 0 to 60 mm 0 25 mm Oto 150 mm 0 33 mm 0 to 200 mm 0 5 mm 0 to 300 mm 1 0mm 0 to 400 mm Read angles Pitch Code39 0 25 mm 40 degree Skew Code39 0 25 mm 60 degree Dead zone Code39 0 25 mm 8 degree Skew and pitch direction Tilt Jan 13 digits 0
40. s approximately 58 of the full capacity e The surrounding temperature is 20 C e The discharge current is 1 6A constant current 4 4 2 HA A60IO HA A6110 HA A30CHG Table 4 16 Item Specification Remark Condition MTBF for electronics parts 50 000 hours Mounting removing the terminal to from Cradle 20 000 times Power switch 5 000 times DIP switch 10 times For HA A611IO only USB 500 times RS 232C 500 times For HA A61IO only RS 422 100 times For HA A611O only No of ON OFF times of the power jack 1 500 times Switch No of ON OFF times of the connector 44 3 DT 5022CHG Table 4 17 Ttem Specification Remark MTBF 210 000 hours or more MIL HDBK217F Protection from short Internal circuit is protected from a short between the charge terminals 43 4 5 Compliance 4 5 1 DT X5 EMC EMI Safety WLAN Bluetooth type approvals Table 4 18 Compliance Standard Europe EN301 489 17 EN60950 EN60825 EN300 328 2 EN50371 EMLEMS Safety Laser Bluetooth EN50361 WLAN EN50360 SAR DT X5M10E Yes Yes Yes Yes Yes DT X5M10R Yes Yes Yes Yes Yes DT X5M30E Yes Yes Yes Yes Yes DT X5M30R Yes Yes Yes Yes Yes Columns in gray color not applicable Table 4 19 Compliance Standard USA Model FCC UL60950 1 FCC Part 15 Part 15B Class sub part C B SAR DT X5M30U Yes Yes Yes 4 5 2 HA A60I0 HA A6110 HA A30CHG Table 4 20 Comp
41. tor 3 Ifthe battery is improperly used the electrolyte may leak and soil other objects resulting in fire and personal injury Be sure to observe the following precautions 4 Make sure of the polarity or of the battery when installing it 5 Do not leave this terminal unused for an extended period of time with the battery installed About the battery pack Do not use the battery pack in a place where it will be exposed to static electricity The battery pack may become hot explode or ignite Avoid exposing it to water and foreign matter Should foreign matter metal chips water liquid chemicals enter inside the product immediately turn off the DT XS remove the battery pack and then contact a CASIO distributor Memory protection l Contents of the DT X5 should always be backed up in personal computer to make a separate record from that on the terminal The contents of the memory may accidentally be lost due to battery power consumption etc This also occurs when this terminal malfunctions or is repaired 2 When replacing the battery pack or AA alkaline batteries always refer to the user s guide Improper battery replacement may lead to unexpected loss or alteration of data Place of installation 1 Do not place the DT X5 in an environment with a significant amount of moisture or dust Otherwise a fire or electric shock may occur 2 Donotuse the DT X5 in the vicinity of a cooking table humidifier etc where it

Casio DT-X5 Computer Hardware User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents