Casio 5085 Watch User Manual
Contents
1. stopwatch operation 60 min day Operating Precautions Water Resistance The following applies to watches with WATER RESIST or WATER RESISTANT marked on the back cover Water Enhanced Water Resistance Under Daily Use Resistance Under Daily U 5 10 20 naer Dally Vse Atmospheres Atmospheres Atmospheres Marking Q7 watch front or on No BAR mark 5BAR 10BAR 20BAR Hand washing rain Yes Yes Yes Yes oa Water related work swimming No Yes Yes Yes Use Windsurfing No No Yes Yes Skin diving No No Yes Yes e Do not use this watch for scuba diving or other types of diving that requires air tanks e Watches that do not have WATER RESIST or WATER RESISTANT marked on the back cover are not protected against the effects of sweat Avoid using such a watch under conditions where it will be exposed to large amounts of sweat or moisture or to direct splashing with water e Even if a watch is water resistant do not operate its buttons or crown while it is submersed in water or wet e Even if a watch is water resistant avoid wearing it in the bath or in areas where detergents soap shampoo etc are being used Such conditions can reduce water resistance e After submersion in seawater use plain water to rinse all salt and dirt from the watch e In order to maintain water resistance have the gaskets of your watch replace periodically about once every two or three years e A trained technician will kn2. CASIO Service Center to have it checked repaired or replaced Note that you will be charged for any repair or replacement of the band Temperature e Never leave the watch on the dashboard of a car near a heater or in any other location that is subject to very high temperatures Do not leave the watch where it will be exposed to very low temperatures either Temperature extremes can cause the watch to lose or gain time to stop or otherwise malfunction Impact Your watch is designed to withstand impact incurred during normal daily use and light activity such as playing catch tennis etc Dropping the watch or otherwise subjecting it to strong impact however can lead to malfunction Note that watches with shock resistant designs G SHOCK Baby G G ms can be worn while operating a chain saw or engaging in other activities that generate strong vibration or while engage in strenuous sports activities motocross etc Magnetism e The hands of analog and combination analog digital watches are moved by a motor that uses magnetic force When such a watch is close to a device audio speakers magnetic necklace cell phone etc that emits strong magnetism the magnetism can cause timekeeping to slow down speed up or stop resulting in the incorrect time being displayed Electrostatic Charge e Exposure to very strong electrostatic charge can cause the watch to display the wrong time Very strong electrostatic charge even can damage el
3. MA0811 EA CASIO Module No 5085 Be sure to keep all user documentation handy for future reference e Your watch may differ somewhat from the one shown in the illustration e Some water resistant models are equipped with a screw lock crown e With such models you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out Do not pull too forcibly on such crowns e Also note that such watches are not water resistant while their crowns are loosened Be sure to screw the crowns back in as far as they will go after making any setting Hour hand Minute hand To set the time 1 Pull the crown out to the second click when the second hand is at 12 o clock position and the second hand stops 2 Set the hands by rotating the crown Rotate the crown to move the hands clockwise Move the minute hand four or five minutes past the time you want to set and then back it up to the proper setting e Carefully set the time making sure to distinguish between AM and PM Push the crown back in to the normal position to restart timekeeping First click Setting day and day of the week Second click Setting time Crown Normal position Second hand Day of the week To set the day 1 Pull the crown out to the first click 2 Set the day by rotating the crown away from you in the direction indicated by the arrow in the illustration 3 Pus
4. come discolored due to sweat and dirt and if exposed to high temperatures for long periods e Contact an authorized CASIO Service Center to have resin components replaced Note that you will be charged for replacement costs Natural Leather and Imitation Leather Bands e Allowing the watch to remain in contact with other items or storing it together with other items while it is wet for long periods can cause the color of the other items to transfer to the natural leather or imitation leather band of the watch Be sure to dry off the watch thoroughly before storing it and make sure it is not in contact with other items e Leaving a leather band where it is exposed to direct sunlight ultraviolet rays for long periods or failure to clean dirt from a leather band for long periods can cause it to become discolored Important e Subjecting a natural leather or imitation leather band to rubbing or dirt can cause color transfer and discoloration Metal Components e Failure to clean dirt from a metal band can lead to formation of rust even if the band is stainless steel or plated If the watch is exposed to sweat or water wipe it thoroughly with a soft absorbent cloth and then store it in a well ventilated location to dry To clean the band use a soft toothbrush or similar tool to scrub it with a weak solution of water and a mild neutral detergent Take care to avoid getting solution on the watch case Bacteria and Odor Resistant Band e The ba
5. cteria and odor resistant band protects against odor generated by the formation of bacteria from sweat which ensures good comfort and hygiene In order to ensure maximum bacteria and odor resistance keep the band clean Use an absorbent soft cloth to wipe the band clean of dirt sweat and moisture The bacteria and odor resistant band suppresses the formation of organisms and bacteria It does not protect against rash due to allergic reaction etc Note that CASIO COMPUTER CO LTD assumes no responsibility for any damage or loss suffered by you or any third party arising through the use of this product or its malfunction User Maintenance Caring for Your Watch e A dirty or rusty case or band can soil the sleeve of your clothing cause skin irritation and even interfere with watch performance Be sure to keep the case and band clean at all times Rust tends to form easily after the watch is exposed to seawater and then left without cleaning e Sometimes a smudge like pattern may appear on the surface of a resin band This will not have any affect on your skin or clothing Wipe the band with a cloth to clean it e Keep a leather band clean by wiping it with a dry cloth Both resin bands and leather band can become worn and cracked over time when subjected to normal daily use e Should your band become badly cracked or worn be sure to have it replaced with a new one Request band replacement from your original retailer or an autho
6. ectronic components Chemicals e Do not allow the watch to come into contact with thinner gasoline solvents oils or fats or with any cleaners adhesives paints medicines or cosmetics that contain such ingredients Doing so can cause discoloration of or damage to the case resin band leather band and other parts Storage e If you do not plan to use the watch for a long time wipe it thoroughly free of all dirt sweat and moisture and store it in a cool dry place Resin Components e Allowing the watch to remain in contact with other items or storing it together with other items for long periods while it is wet can cause the color of the other items to transfer to the resin components of the watch Be sure to dry off the watch thoroughly before storing it and make sure it is not in contact with other items e Leaving the watch where it is exposed to direct sunlight ultraviolet rays for long periods or failure to clean dirt from the watch for long periods can cause it to become discolored e Friction caused by certain conditions frequent external force sustained rubbing impact etc can cause discoloration of painted components e If there are printed figures on the band strong rubbing of the printed area can cause discoloration e Failure to clean dirt from the watch for long periods can cause fluorescent color to fade Wash dirt off with water as soon as possible and then dry the watch e Semi transparent resin parts can be
7. g procedures to adjust the positions of the hands so they point to 12 o clock when the stopwatch is reset To adjust the positions of the stopwatch hands 1 Press to reset the stopwatch and check the alignment of the stopwatch minute hand and second hand 2 Pull out the crown to the second click 3 Press to move the stopwatch minute hand and second hand 4 If the stopwatch minute hand is aligned correctly proceed to step 5 To return the minute hand to the 12 o clock position press 6 5 After making the adjustments you want push the crown back in to its normal position e Note that pulling the crown out also stops the timekeeping second hand After performing the above procedure you should also adjust the timekeeping setting E For a watch with an elapsed time bezel Rotate the elapsed time bezel to align the 7 mark with the minute hand After certain amount of time elapsed read the graduation on the elapsed time bezel which the minute hand points to The elapsed time is indicated Elapsed time bezel Specifications Accuracy at normal temperature 20 seconds a month Display 3 analog hands timekeeping hour and minutes stopwatch seconds 3 dials timekeeping seconds day of the week stopwatch minutes day Stopwatch function Measuring capacity 59 59 Measuring unit 1 second Measuring modes Elapsed time Battery One silver oxide battery Type SR626SW Approximately 2 years on type SR626SW assuming one
8. h the crown back in to the normal position Avoid changing the date setting while the current time is between 9 00 p m and 1 00 a m To set the day of the week 1 Pull the crown out to the first click 2 Set the day of the week by rotating the crown towards you in the direction indicated by the arrow in the illustration 3 Push the crown back in to the normal position Avoid changing the day of the week setting while the current time is between 11 00 p m and 2 00 a m Using the Stopwatch Stopwatch minute hand Stopwatch second hand The stopwatch lets you measure elapsed time up to 59 minutes 59 seconds To measure elapsed time 1 Press to start the stopwatch 2 Press A to stop the stopwatch e You can resume the measurement operation by pressing again 3 Check the elapsed time e The example below shows an elapsed time of two minutes 44 seconds K Ans Stopwatch minute hand NA 2 minutes GNX Z Stopwatch second hand ete 44 seconds NY e Press to reset the stopwatch This will enter the Timekeeping Mode Notes e Do not try to perform stopwatch operations while the crown is pulled out either to the first or second click If you try to press a button you might accidentally cause the crown to rotate and change the current time or day setting e If the starting positions of the stopwatch minute hand and second hand become misaligned use the followin
9. ow how to check your watch for proper water resistance whenever you have its battery replaced Battery replacement requires the use of special tools Always request battery replacement from your original retailer or from an authorized CASIO Service Center e Some water resistant watches come with fashionable leather bands Avoid swimming washing or any other activity that causes direct exposure of a leather band to water e The inside surface of the watch glass may fog when the watch is exposed to a sudden drop in temperature No problem is indicated if the fogging clears up relatively quickly If the fogging does not clear or if water has gotten into the watch take the watch in for repair immediately e Continued use of the watch with water inside can result in damage to electronic and mechanical components the face of the watch etc Band e Tightening the band too tightly can cause you to sweat and make it hard for air to pass under the band which can lead to skin irritation Do not fasten the band too tightly There should be enough room between the band and your wrist so you can insert your finger e Deterioration rust or corrosion of the band can cause it to break which may result in the watch falling off your wrist and becoming lost Be sure to take good care of the band and keep it clean Should you notice any breakage discoloration looseness or other problem with the band immediately contact your original retailer or an authorized
10. rized CASIO Service Center Note that you will be charged for band replacement costs even if your watch is still covered by its warranty e Remember that you wear your watch next to your skin just like a piece of clothing Because of this you should always keep your watch clean Use a soft absorbent cloth to wipe off any dirt sweat water or other foreign matter from the case and band Dangers of Poor Watch Care Rust e Though the stainless steel used for the watch is highly rust resistant rust can form if the watch is not cleaned after it becomes dirty Failure of oxygen to come into contact with the metal because it is dirty causes breakdown of the oxidization layer on the metal surface which leads to the formation of rust Even if the surface of the metal appears clean sweat and rust in crevasses can soil the sleeves of clothing cause skin irritation and even interfere with watch performance Premature Wear e Leaving sweat or water on a resin band or storing it an area subject to high moisture can lead to premature wear cuts and breaks Skin Irritation e Individuals with sensitive skin or in poor physical condition may experience skin irritation when wearing a watch Such individuals should keep their leather band or resin band particularly clean or switch to a metal band Should you ever experience a rash or other skin irritation immediately remove the watch and contact a skin care professional Battery Replacement e Lea
11. ve battery replacement up to your original retailer or authorized CASIO Service Center Have the battery replaced only with the type specified by in this manual Use of another type of battery can cause malfunction e When replacing the battery also request a check for proper water resistance Note that you will be charged separately for water resistance inspection Initial Battery e The battery that comes loaded in your watch when you purchase it is used for function and performance testing at the factory e This type of test battery may go dead quicker than the normally rated battery life as noted in the User s Guide Note that you will be charged for replacement of this battery even if replacement is required within the watch s warranty period Low Battery Power Low battery power is indicated by large timekeeping error when display contents are dim or when the display does blank e Operation while battery power is low can result in malfunction Replace the battery as soon as possible
Download Pdf Manuals
Related Search