Home

Cadillac 2007 DTS Automobile User Manual

Contents

1. HDMI Audio In DVI VGA VGA EN 49 English Use Philips EasyLink Enable or disable EasyLink Philips EasyLink provides several features that enable you to control devices that are connected via HDMI Connected devices must support the HDMI CEC standard and must be properly configured for EasyLink to work Note HDMI CEC functionality is known by other names on other brands Some examples are Anynet Samsung Aquos Link Sharp or BRAVIA Sync Sony Not all brands are fully compatible with Philips EasyLink To enable or disable EasyLink Note Do not enable Philips EasyLink if you do not intend to use it 1 Press ft 2 Select Setup gt TV settings gt EasyLink gt On or Off then press OK EasyLink features With Philips EasyLink enabled the following features are available One touch play When you play content from a HDMI CEC compliant device the TV switches on from standby and switches to the correct source One touch standby When you connect your TV to a HDMI CEC compliant device pressing amp on the TV remote control switches the TV and all connected HDMI devices to standby mode System audio control When you connect your TV to for example a HDMI CEC compliant Home Theatre System HTS your TV speakers automatically mute and audio from the TV plays through the HTS For more information about system audio control and other types of TV speaker confi
2. Repeat steps 5 and 6 to unhide other channels Install channels Automatic install When the TV was switched on for the first time a full installation of channels was performed You can redo this full installation again to set your language country and install all available TV channels 1 Press ft 2 Select Setup gt Search for channels then press OK 3 Follow the on screen instructions to complete the channel installation 4 Once complete select Finish then press OK Tip Press WA to see the channel list Notes e _ During installation leave Settings unchanged unless your digital provider provides you with the specific values to enter e When digital TV channels are found the ist of installed channels may display empty channel numbers You can rename reorder or uninstall these channels Setup network Benefits PC network If the TV is connected to your PC network you can play photos music and movies from a computer or storage device in that network Once the network is installed select Browse PC in the home menu to view PC content Net TV If the TV is connected to the PC network which is connected to the internet you can link up your TV to Net TV The Net TV start page offers you movies pictures music infotainment games and many more all fit for your TV screen Once the network is installed select Browse Net TV in the home menu to open the Ne
3. E 10 Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed with normal household waste Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health Use a Kensington lock Your TV is equipped with a Kensington security slot located under the TV or at the back of the TV Purchase a Kensington anti theft lock not supplied to secure the TV Position the TV To mount the TV purchase a Philips TV mount or a compatible TV mount Check your TV screen size and match it against the list for the type of wall mount to purchase 32 inches 81cm 200mm x 200mm M6 40 inches 102cm 200mm x 200mm M6 46 inches 117cm 300mm x 300mm M8 52 inches 132cm 400mm x 400mm M8 Warning Follow all instructions provided with the TV mount Koninklijke Philips Electronics N V bears no responsibility for improper TV mounting that results in accident injury or damage To prevent damage to cables and connectors be sure to leave a clearance of at least 5 5cm 2 2 from the back of the TV For 32 inch to 42 inch TVs Before you wall mount the TV determine the correct length of the screw You can determine the length of the screw by adding the thickness of your wall mount to the screw length shown in the graphic min 11 mm max 13 mm For 46 inch
4. gt HDMI Game console EN 46 console are at the side of the TV However more connectors are available at the back of Enable game mode To prevent picture delay set the TV to Game mode 1 Press ON 2 Select Smart picture gt Game then press OK 3 Press D to exit The most practical connections for a game console are at the side of the TV Otherwise connect the game console to the HDMI or the EXT2 YPbPr and Audio L R cables connectors on the bottom of the TV On certain models EXT 2 is labelled EXT 3 YPbPr Audio L R Dig camera To view pictures on your digital camera connect it to the USB connector at the side of the TV Switch on the digital camera If he content of your camera does not appear automatically you may need to enable Picture Transfer Protocol PTP on the camera Refer to the camera s user manual for instructions EN 47 English Dig camcorder The most practical connection for a camcorder is at the side of the TV Otherwise use an HDMI or the component video and audio cable YPbPr and Audio L R to connect the camcorder to the back of the TV Qe HDMI SP YPbPr g Audio L R AC PC Connect a computer using one of the following cables HDMI cable EN 48 DVI HDMI cable AUDIO IN DVI VGA HDMI l HDMI cable and HDMI DVI adaptor VGA cable D IW VGA HDMI DVI Audio In DVI VGA
5. e _ Stop Stops playback e Repeat Repeats a video e Shuffle on Shuffle off Enables or disables random play of videos Browse PC View photos play music and watch videos on TV from a PC or another storage device in your home network To browse your PC network first set up the network connection see Setup the TV gt Set up network Page 31 If the network is not installed the first time you access Browse PC the network installation starts Follow the on screen instructions To access the PC network In the home menu select Browse PC then press OK EN 26 With the PC and router switched on the TV displays the multimedia server content from your PC With the PC content list open on screen select the file you want to play and press OK A song a slideshow of photos or a video starts playing View slideshow Press the Navigation buttons to select a picture then press OK e To pause or stop playback press OK again e To jump to the previous or next file press m or Pa e Press D to exit content browser Press B to access or exit the following settings e Show info Displays the file information e Stop Stops slideshow e Rotate Rotates the file e Repeat Repeats the slideshow e Play once Plays the file once e Shuffle off Shuffle on Enables or disables random display of pictures in the slideshow e Slideshow speed Sets the display time for ea
6. Audio and Video synchronisation sync EN 42 Do not connect the audio signal from a home theatre Always lead the sound DVD player or other device directly to the through the TV first Dig receiver satellite First use two antenna cables to connect the antenna to the receiver and the TV e Antenna Digital receiver Satelite receiver Digital receiver Satelite receiver Dig receiver and DVD R First use three antenna cables to connect the digital receiver and the DVD Recorder to the TV EN 43 English Finally use a YPbPr cable to connect the receiver to the TV YPbPr Audio L R i Ne En Digital receiver Satelite receiver Dig receiver DVD R and HTS First use three antenna cables to connect the two devices and the TV EN 44 Then use two YPbPr cables to connect the digital receiver to the DVD Recorder and the DVD Recorder to the TV Se ges YPbPr Audio L R LES Digital TV receiver HDMI DVD Home Theatre System Finally use a digital audio cinch cable to connect the Home Theatre System to the TV gt Digital Audio en xs DVD Home Theatre System i R Digital Audio A Out Digital Audio i In EN 45 English Dig HD receiver First use two antenna cables to connect the Digital HD receiver to the TV lt lt Antenna HDMI Digital HD receiver Connect more devices Game console The most practical connections for a game the TV if needed
7. A message will display the update status Follow the on screen instructions to complete the update and restart your TV Reinstall the TV Reinstalling your TV resets all picture and sound settings and reinstalls all TV channels 1 Press ft 2 Select Setup gt TV settings gt Reinstall TV then press OK 3 Follow the on screen instructions EN 37 English 5 Connect the TV Antenna Locate the antenna connector at the back of the TV Insert the antenna cable securely into the antenna connector First connections Power Be sure that the power plug in the wall socket is accessible at all times When disconnecting the power cable always pull the plug never the cable Although this TV has a very low standby power consumption switch off the TV using the power switch on the bottom of the TV if you do not use the TV for a long time ar 5 TVANTENNA L_a About cables Overview Before you connect devices to the TV verify which connectors are available on the device Connect the device to the TV with the highest quality connection available Good quality cables ensure a good transfer of picture and sound The connections shown in this user manual are recommendations only Other solutions are possible HDMI An HDMI connection has the best picture and sound quality e One HDMI cable combines video and audio signals Use HDMI for High Definition HD TV signals and to enable EasyL
8. H 264 L4 HD audio AAC LC HE AAC V mkv video H 264 audio HE ACC AC3 Connectivity Rear e _ AV IN VIDEO and Audio L R e _CVI2 Component Video Y Pb Pr Audio L R e Headphones Stereo 3 5mm mini jack e _SERVU Service port e Network Ethernet Bottom e CVI 1 Component video YPbPr Audio L R DMI 1 ARC HDMI Audio Return Channel DMI 2 and HDMI 3 HDMI Available in selected models only DIGITAL AUDIO OUT Coaxial e AUDIO IN DVI VGA stereo 3 5mm mini jack e _ Antenna 75 ohm coaxial e VGA PC input Side e HDMI e USB Dimensions Note Dimensions and weights are approximate values only Design and specifications are subject to change without notice The legends used to indicate the TV dimensions are as follows 32 inch 81 cm TV 40 inch 102 cm TV For PFL56x5D PFL66x5D 46 inch 117 cm TV 9 40 inch 102 cm TV For PFL86x5D 52 inch 132 cm TV ake a note of the legend that corresponds o your TV Then navigate to the next page o view the dimensions EN 57 English Use your TV legend to note the dimensions of your TV with and without the stand 790 977 1122 966 1243 mm 501 3 605 685 G93 748 KCT NACO LELEL 6p9 THS Use your TV legend to note the thickness of your TV with and without the stand O2
9. differentiate them with unique names 1 Press ff then select Setup gt Network settings gt TV network name 2 Press OK to open the on screen keyboard 3 Enter the TV name with the on screen keyboard then press OK Project your PC Help To read the Wi Fi MediaConnect Help right click the program icon in the notification tray of the PC and select Help Specifics e _ You can project high definition HD or standard definition SD video depending on the processing power of your PC e Certain commercial DVD Blu ray discs may not be projected to the TV due to output content protection e The TV shows PC media files with a small delay e Wi Fi MediaConnect is only available for PC Project your PC PC requirements Minimum specifications e Windows XP Vista Windows 7 PC only e Intel Pentium Core 2 Duo 1 8GHz e 512MB RAM e 200MB free hard disk space e Wi Fi 802 11g e Internet connection Project your PC PC requirements Recommended specifications e Windows XP Vista Windows 7 PC only e Intel Pentium Core 2 Duo 2 1GHz e 1GB RAM e 200MB free hard disk space e Wi Fi 802 11n e Internet connection Network settings The TV s network settings that are used to connect to your router are standard and set to automatic This ensures easy connection with any available network If you have problems with the network connection you might want to adjust the settings so that
10. until the TV temperature matches room temperature before connecting the TV to the power outlet Screen care e Risk of damage to the TV screen Never touch push rub or strike the screen ith any object nplug the TV before cleaning e Clean the TV and frame with a soft damp cloth Never use substances such as alcohol chemicals or household cleaners on the TV e To avoid deformations and colour fading wipe off water drops as soon as possible e C 2 e _ Avoid stationary images as much as possible Stationary images are images hat remain on screen for extended periods of time Stationary images include on screen menus black bars ime displays etc If you must use stationary images reduce screen contrast and brightness to avoid screen damage EN 9 English End of use Your product is designed and manufactured with high quality materials and components which can be recycled and reused a ae When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products ease act according to your local rules and o not dispose of your old products with our normal household waste Correct isposal of your old product helps to revent potential negative consequences for he environment and human health P d y d P
11. EasyLink autostart are selected access the experience menu to switch the TV audio 1 While watching TV press INL 2 Select Speakers then press OK 3 Select one of the following then press OK EN 51 English e _ TV On by default Streams TV audio e Amplifier Streams audio through the through TV speakers until the connected HDMI CEC device If system connected HDMI CEC audio device audio mode is not enabled on the switches to system audio control device audio will continue to stream Thereafter TV audio is streamed from TV speakers if EasyLink was through the connected device selected If EasyLink autostart was enabled the TV prompts the connected device to switch to system audio mode Use HDMI ARC The HDMI 1 connector is HDMI Audio Return Channel ARC compliant Use it to output digital audio to a HDMI Home Theatre System Re HDMI TV Home Theatre System T RA HDMI ARC a t aip HDMI ARC allows you to use Philips EasyLink to output TV audio directly to a connected audio device without the need for an additional digital audio cable Be sure that the device is HDMI CEC and ARC compliant and that the TV is connected to the device using a HDMI cable attached to HDMI ARC connectors Enable or disable HDMI ARC Note Enabling HDMI ARC automatically adds the device to the home menu 1 Press 2 Select Setup gt TV settings gt EasyLink gt HDMI 1 ARC gt On or Of
12. _ Scheduled reminders Lists programs reminders Update Programme guide Updates the latest program information Display Closed caption text Display closed caption text The caption service displays transmitted CC text The text can be displayed at all times or only when the TV is muted e If you activate DTVi the CC text is hidden Note Not all TV programs and commercials include closed caption information Refer to the TV program listings in your area for information on TV channels and closed caption text The captioned programs are usually noted in the TV listings with service marks such as CC 1 When watching TV press B 2 Press ar to select Closed captions 3 Press awa to select an option and then press OK 4 Press B 5 Press ar to select Caption service 6 Press ar to select the correct type of closed caption and then press OK Use timers locks and subtitles Sleeptimer Sleeptimer switches the TV to standby after a pre defined period of time You can always switch off your TV earlier or reset the sleeptimer during the countdown 1 Press ft 2 Select Setup gt TV settings gt Preferences gt Sleeptimer 3 Press the Navigation buttons to set the sleeptimer The sleeptimer can be set up to 180 minutes in steps of five minutes The sleeptimer is switched off if it is set to zero minutes 4 Press OK to activate the sleeptimer The TV switches to standby
13. indicator does not turn on when the TV is switched on e The TV requires some time to start up During this time the TV will not respond to the remote control or side controls This is normal behavior To switch to standby Press on the remote control The front LED indicator switches to red To switch off Press the power switch on the bottom of the TV to the o position The TV switches off Though your TV consumes very little power when in standby energy continues to be consumed When not in use for an extended period of time switch off the TV using the power switch on the bottom of the set Tip If you cannot locate your remote control and want to switch on the TV from standby press P CH on the side of the TV Switch channels e Press mr on the remote control or P CH on the side of the TV e _ Press then select Channel list to use the channel list e Press D to retum to the previously viewed channel e Enter a channel number using the Numeric buttons To view analog or digital channels only Filter the channel list to access analog or digital channels only 1 In the channel list press B 2 Select Select list gt Analogue or Digital then press OK Depending on your selection only digital or analog channels become available Adjust volume To increase or decrease volume e Press on the remote control EN 17 English e Press wa on
14. players EN 40 4 HDMI ARC In addition to regular HDMI functionality outputs TV audio to HDMI ARC compliant device such as a home theatre system 5 AUDIO IN Audio input from devices that require a separate audio connection such as a computer 6 ANTENNA Signal input from an antenna cable or satellite 7 VGA Video input from a computer Side connectors 1 HDMI Digital audio and video input from high definition digital devices such as Blu ray players 2 USB Data input from USB storage devices Connect devices Blu ray disc player Use an HDMI cable to connect the Blu ray disc player to an HDMI connector on the bottom of the TV Qe HDMI DVD player Use an HDMI cable to connect the DVD player to an HDMI connector on the bottom of the TV DVD Recorder First use two antenna cables to connect the antenna to the DVD recorder and the TV EN 41 English Finally use YPbPr cable to connect the DVD Recorder to a YPbPr connector on the bottom of the TV ma YPbPr Audio L R ae Ca DVD recorder Home Theatre System First use an HDMI cable to connect the device to the TV Digital Audio Digital Audio Qut In Audio Out L R If the sound does not match with the video on screen you can set a delay on most home theatres to match the sound and video If there is no digital audio output on the home theatre you can use the TV s analogue Audio Out L R connection
15. the content provided by the content service providers Internet websites With Net TV you can link up to the Internet You can view any website you like but remember that most Internet websites are not meant to be viewed on a TV screen and certain plug ins e g to view pages or videos are not available on your TV Open an Internet site To go to an Internet page select Internet and press OK Use the on screen keyboard to enter the web address you need Select a character and press OK to enter it in the address line at the top of the page Once you have entered the address select Go and press OK to load the Internet website Use the Navigation buttons to navigate to the available links on an open Internet page press OK to go to the link Internet history Net TV will automatically add every site you visit to the history list Later you can select a site icon in the list and press OK to open it To scroll through the history list use the Navigation buttons Clear Net TV history With a site icon selected in the history list you can clear the whole list Press EF Options and select Clear history EN 23 English 3 Use more of your TV Favorite channels Add or remove channels 1 Press W 2 Select Channel list then press OK 3 Press B 4 Select Mark as favourite or Unmark as favourite then press OK A star appears in the channel grid indicating that the channel is added to the
16. they are appropriate for your home network If you are unsure ask someone with knowledge of network settings to help you To set specific network settings press ff gt Setup gt Network settings and press OK For more information on Page 33 access the PDF version of this user manual on the internet at www philips com support PC media server settings Enable media sharing In Microsoft Windows start TVersity Click the Settings tab and click the Start Sharing button pen A pop up window tells you that the media server service is started Click OK Set folders for media sharing In TVersity click the Sharing tab Click the green plus icon and select Add folder In the Add media pop up window click Browse button n the Browse for Folder window select a folder with music photos or videos which you you want to share and click OK Enable media sharing n Mac OS X start Twonky Media T wonky edia appears n the Basic Setup box click Clients Security Clients Security settings appear Click Enable sharing for new clients automatically then click Save Changes Media sharing is enabled Add folders for media sharing In the Basic Setup box click Sharing Sharing settings appear EN 33 English Click Browse to add a folder location Click Add new content directory to add more folders When all folders are added click Save changes then click Rescan conten
17. 30Hz 50Hz 60Hz Multimedia Supported multimedia connections e USB FAT or DOS formatted Mass Storage Class compliant only e _ Ethernet UTP5 Supported image files e JPEG jpg Supported audio video files AVI avi video MPEG 4 SP MPEG 4 ASP audio MPEG Layer 2 3 AC3 MPEG mpg mpeg vob video MPEG 1 MPEG 2 MPEG mp2 mp3 mpg mpeg vob audio MPEG 1 Layer 2 MPEG 1 Layer 3 LPCM AC3 MPEG 4 mp4 video MPEG 4 AVC H 264 L2 CIF L4 HD audio AAC LC HE AAC Multimedia file names must not exceed 128 characters Supported audio video files WMV wmv video WMV9 VC1 WMA wma audio WMA v2 to v9 2 MKV mkv video H 264 audio HE AAC AC3 Multimedia file names must not exceed 128 characters Supported DLNA compliant media server software e Windows Media Player for Microsoft Windows e Twonky Media for Microsoft Windows and Mac OS X e _ Sony Vaio Media Server for Microsoft Windows e _TVersity for Microsoft Windows e Nero MediaHome e DIXiM for Microsoft Windows XP e Macrovision Network Media Server for Microsoft Windows e Fuppes for Linux e uShare for Linux Supported DLNA audio video files WMV wmv video WMV9 VC1 PEG mp2 mp3 mpg mpeg vob audio MPEG 1 Layer 2 MPEG 1 Layer 3 PEG 4 mp4 video MPEG 4 AVC H 264 L2 CIF PEG 4 AVC
18. 86 87 GED 42 43 gt imm e mm 221 4 1 236 268 242 295 Use your TV legend to note the weight of the TV with stand 11 5 kg 16 1 kg 21 3 kg 16 24 5 EN 58 Use your TV legend to note the weight of the TV without the stand UMv 3139 137 04054 20100823 EN 59 English 8 Index A Age rating Ambilight Ambilight settings Ambilight response speed Ambilight switch on audio lip sync C care channel list channels favorites channels hide or unhide channels rename clock closed caption text connect PC network connect power connect USB connectors bottom connectors rear connectors side controls side D default settings demo devices add devices watch dimensions display resolution DTVi 24 12 19 20 19 33 10 16 23 28 28 33 23 29 37 24 39 38 39 14 28 28 19 19 53 52 26 E EasyLink buttons EasyLink enable EasyLink features EasyLink RC key forward EasyLink TV speakers end of use EPG enable EPG menu EPG overview F factory settings favorites list add favorites list select H hearing impaired home menu home mode information on Internet information on screen L ocation home or shop ocation stand or wall mount Lounge light M menu add device menu channel list menu home menu options menu setup multimedia overvie
19. EN 7 English Contact your dealer for more information Go to www philips com support to find FAQs that list the HD channels or providers in your country Network and Net TV Internet A Router Network When you connect your TV to your home network you can play music photo and video from a computer or other media server on the same network Read more in Help gt Setup the TV gt Setup Network Page 31 Available on certain models only Net TV When the connected PC network is connected to the Internet you can connect your TV to Net TV Net TV offers movies pictures music and much more Read more in Help gt Use your TV gt Enjoy Net TV Page 20 Available on certain models only Important Congratulations Congratulations on your purchase and welcome to Philips To fully benefit from the support that Philips offers register your TV at www philips com welcome Safety Read and understand all instructions before you use your TV If damage is caused by failure to follow instructions the warranty does not apply EN 8 Risk of electric shock or fire Never expose the TV to rain or water Never place liquid containers such as vases near the TV If liquids are spilt on or into the TV disconnect the TV from the power outlet immediately Contact Philips Consumer Care to have the TV checked before use e Never insert objects into the ventilation slots or other op
20. HDMI CEC compliant An On Screen Remote Control OSRC gives you easy access to commonly used functions The on screen buttons available differ depending on your TV setup and features of the connected HDMI CEC device To access the OSRC 1 While watching TV or a connected device press B 2 Select Show device keys then press OK 3 Use the Navigation buttons and OK to select and use an on screen button Basic TV menus Home The home menu gives you easy access to connected devices picture and sound settings and other useful features 1 Press ft 2 Select an item in the home menu then press OK to access the menu 3 To exit the home menu press foD A N To start an activity highlight the desired item with the Navigation buttons and press OK e _ Help Accesses the electronic user manual e Watch TV Switches back to the antenna source if another source is selected e Browse USB If a USB storage device is connected accesses the content browser e Browse PC Accesses the content browser of the connected PC network e Browse Net TV Accesses Net TV e _ Scenea Switches to the Scenea wallpaper e Add your devices Adds new devices to the home menu e _ Setup Accesses menus that allow you to change picture sound and TV settings Browse The browse menu gives you easy access to e TV channel list e _ Electronic Program Guide To access the browse menu while watc
21. Options Displays the menu of the connected device When ft is pressed the TV menu is displayed e Standby Press to enable one touch standby This switches the TV and the connected device to standby Other EasyLink buttons are available via On Screen Remote Control OSRC To access the OSRC 1 While watching a connected device press B 2 Select Show remote control then press OK 3 Use the Navigation buttons and OK to select and use an on screen button 4 Press D to exit Configure TV speakers You usually connect the TV to a HDMI CEC compliant device such as a HTS using both a HDMI cable for video and a digital audio cable for audio You can output TV audio through the HDMI cable solely provided both the TV and device are HDMI ARC compliant see Connect the TV gt Use Philips EasyLink gt Use HDMI ARC Page 52 Configure TV speakers 1 Press ft 2 Select Setup gt TV settings gt EasyLink gt TV speakers 3 Select one of the following options then press OK e Off Tum off TV speakers e On Tum on TV speakers e EasyLink TV audio continues to be streamed through the TV speakers Switch the TV audio to the connected HDMI CEC audio device through the experience menu e EasyLink autostart Turn off TV speakers automatically and streams TV audio to the connected HDMI CEC audio device Switch TV audio in experience menu lf EasyLink or
22. Press the Navigation buttons to select a picture then press OK e To pause or stop playback press OK again e To jump to the previous or next file press m or s e _ Press D to exit content browser Press B to access or exit the following settings e Show info Displays the file information e _ Stop Stops slideshow e Rotate Rotates the file e Repeat Repeats the slideshow e Play once Plays the file once e _ Shuffle off Shuffle on Enables or disables random display of pictures in the slideshow e _ Slideshow speed Sets the display time for each picture in the slideshow EN 25 English e Slideshow transition Sets the transition from one picture to the next e Set as Scenea Sets the selected picture as wallpaper on TV Listen to music Press the Navigation buttons to select a music track then press OK e Press a p to fast rewind or fast forward a track e Press D to exit content browser Press B to access or exit the following settings e _ Stop Stops audio playback e Repeat Repeats a song or an album e Play once Plays the file once e Shuffle on Shuffle off Enables or disables random play of songs Watch video Press the Navigation buttons to select a video file then press OK e Press s or r to rewind or fast forward a file e Press D to exit the content browser During video playback press B to access the following settings
23. Register your product and get support at www philips com welcome 32PFL5615D 32PFL6615D 40PFL5615D 40PFL6615D 40PFL8605D 46PFL5615D 46PFL6615D 52PFL8605D EN User Manual PHILIPS Contents EN 1 Get started 3 TV Tour 3 Important 8 Position the TV 10 Product highlights 12 Access more information 12 2 Use your TV 13 Overview 13 TV controls and indicators 13 Remote control 13 Basic TV menus 15 Watch TV 16 Watch a connected device 19 Use Ambilight 19 Enjoy Net TV 20 3 Use more of your TV 24 Favorite channels 24 Use EPG 24 Display Closed caption text 24 Use timers locks and subtitles 25 Access multimedia 25 Use Scenea 27 Universal access 27 Access DTVi applications 28 4 Setup the TV 29 Change picture and sound settings 29 Change channel settings 30 nstall channels 31 Setup network 31 Change other settings 35 Update software 36 Reinstall the TV 37 5 Connect the TV 38 First connections 38 About cables 38 TV connectors overview 39 Connect devices 41 Connect more devices 46 Use Philips EasyLink 50 Troubleshooting 53 Contact us 53 General TV issues 53 TV channel issues 53 Picture issues 53 Sound issues 54 HDMI connection issues 54 USB connection issues 55 etwork connection issues 55 Technical data 56 Overview 56 Power and reception 56 Display and sound 56 Display resolutions 56 ultimedia 56 Connectivity 57 Dimensions 57 Index 61 1 Get started TV Tou
24. TV gt Setup network Page 31 Once connected press select Browse Net TV to start the Net TV on screen setup Read more at Use your TV gt Enjoy Net TV gt First Use Page 21 Internet a Router First use Registration benefits By registering with Philips you can enjoy exclusive benefits and receive updates on product information Parental control benefits With Parental control switched on you can lock and unlock services and or categories of services You can also unlock some services that are not suitable for children These services are locked from the start Parental control specifics e Only services on the Net TV pages can be locked Advertisements and Internet websites cannot be locked e _ Services are locked per country Categories are locked for all countries Initial setup 1 Agree to the Terms of Use 2 Register for Net TV 3 Switch on parental control How to register To register you need an email address and a PC connected to the Internet If you skip the registration during the initial setup you can register from the Net TV Start page later To start the Net TV registration enter your email address on screen To open the on screen keyboard highlight the text field then press OK Enter the characters one by one Select Register and press OK A message will appear if a registration email has been sent to your email address Open the email on your PC and cl
25. after the set period of time Child lock To prevent children from watching TV you can lock the TV or block age rated programmes Set or change the child lock code 1 Press ft 2 Select Setup gt Channel settings gt Child lock 3 Select Set code or Change code 4 Enter the code with the Numeric buttons Tip If you forget your code enter 8888 to override any existing codes Age rating Some digital broadcasters rate their programs according to age You can set your TV to display only programs with age ratings higher than your child s age 1 Press ft 2 Select Setup gt Channel settings gt Child lock gt Age ratings lock 3 Enter the child lock code with the Numeric buttons 4 Select an age rating then press OK All programs beyond the selected age rating are blocked For information on child lock codes see Use more of your TV gt Use timers and locks gt Child lock Page 25 Access multimedia Browse USB You can view photos or play music and videos on TV from a USB storage device Caution Philips is not responsible if the USB storage device is not supported nor is it responsible for damage or loss of data from the device You can access the USB content browser using one of the following methods e When watching TV connect the USB device to the USB port on the side of your TV e _ Press ff Select Browse USB then press OK View slideshow
26. al This manual contains all of the information you need to install and use this TV Access the user manual by selecting Help in the home menu Before carrying out instructions temporarily close the user manual by pressing on the remote control Open to the same page in the user manual by selecting Help in the home menu On the Internet A printable PDF version of this user manual is available on the Internet It contains the latest information and detailed feature explanations not covered by this on screen user manual Access the PDF as well as other product information including FAQs and firmware upgrades at www philips com support 2 Use your TV Overview This section gives you an overview of commonly used TV controls and functions TV controls and indicators 1 wa Increases or decreases volume ln home menu these buttons allow you to move horizontally 2 ft Accesses the home menu Press again o launch an activity in home menu 3 P CH Switches to the next or previous channel In home menu these buttons allow you to move vertically 4 Ambilight Available in selected models only Switches Ambilight on or off During TV standby switches Loungelight on or off 1 Ambient sensor remote control sensor Remote control Overview 1 1 Standby Switches the TV to standby if it is on Switches on the TV if it is in standby 2 ft Home Accesses the h
27. ch picture in the slideshow e Slideshow transition Sets the transition from one picture to the next e Setas Scenea Sets the selected picture as wallpaper on TV Listen to music Press the Navigation buttons to select a music track then press OK e Press a P to fast rewind or fast forward a track e _ Press D to exit content browser Press B to access or exit the following settings e _ Stop Stops audio playback e Repeat Repeats a song or an album e Play once Plays the file once e _ Shuffle on Shuffle off Enables or disables random play of songs Watch video Press the Navigation buttons to select a video file then press OK e Press sor p to rewind or fast forward a file e Press D to exit the content browser During video playback press B to access the following settings e _ Stop Stops playback e Repeat Repeats a video e Shuffle on Shuffle off Enables or disables random play of videos Use Scenea Activate Scenea You can use Scenea to display a picture as wallpaper on your TV Make sure that the location of your TV is set to Home mode 1 Press ft 2 Select Scenea then press OK The default or pre loaded picture is displayed Note If the sleeptimer is off the wallpaper is displayed for 240 minutes Otherwise it is displayed for the duration of the sleeptimer For more information on the sleeptimer see Use more of your TV gt Use timers and l
28. disable Parental control Show remote control eys like Play Rewind 4 and Fast Forward Pe can be called up with Show remote control Press B Options and select Show remote control With these keys on screen you can operate the connected audio or video player Select a key and press OK to carry out its function Press D Back to hide these on screen keys Reload page If something went wrong during the loading of a page you can try and reload it Press EF Options and select Reload page EN 22 Zoom page To zoom in and out on an Internet page press B Options and select Zoom page Use the slider bar to set the enlargement To scroll through an Internet page use the Navigation buttons to jump from highlight to highlight Security info To view a page s security information press B Options and select Security info Clear Net TV memory Warning this option resets Net TV completely To clear the Net TV memory completely including your favorites the parental control code passwords cookies and history press Et Options and select Clear Net TV memory Net TV services for another country Services may differ for each country To switch to the services of another country select Country at the bottom right of the page and press OK Select a country and press OK Koninklijke Philips Electronics N V bears no responsibility regarding the content and the quality of
29. e green button to turn on audio feedback or press the red button to tum it off 3 Press D to exit Access DTVi applications Use DTVi Available on certain models only Digital TV broadcasters provide DTVi an interactive TV service With DTVi you can e View TV program information e _ Play games If your TV is connected to a home network with Internet connection you can experience true interactivity and respond directly to DTVi See Help gt Setup the TV gt Setup network Page 31 For the availability of interactive services contact your broadcasters EN 28 With this interactivity you can respond to DTVi applications for example e Vote e Request customized information e _ Answer a quiz contest or game 1 Switch to a channel with DTVi As the DTVi application begins to load a blinking symbol is displayed When the load is complete a DTVi icon is displayed 2 Press the button according to the symbol for example the red button or OK The DTVi application launches 3 To use the application follow the on screen instructions 4 To exit press D or EXIT For more information about the application contact the broadcaster 4 Setup the TV Change picture and sound settings Settings assistant Use the settings assistant to guide you through the picture and sound settings 1 While watching TV press 2 Select Setup gt Quick picture and sound sett
30. ecial audio adapted for people who are visually impaired The normal audio is mixed with extra commentary To switch on visually impaired audio if available 1 While watching TV press 2 Press the green button to select Visually impaired 3 Use the following buttons to select e Red Off Tum off visually impaired audio e Yellow Headphones Hear visually impaired audio from headphones only e Green Speakers Hear visually impaired audio from speakers only EN 27 English e Blue Speakers headphones Hear visually impaired audio from speakers and headphones only 4 Press D to exit Note The green and yellow buttons are not applicable if EasyLink Remote Control is enabled For more information see Connect the TV gt Use Philips EasyLink gt EasyLink features Page 50 Tip To verify whether visually impaired audio is available press B and select Audio language Languages with an eye icon indicate visually impaired support Adjust volume for the visually impaired 1 In the Universal access menu press the yellow button to select Mixed volume 2 Press the Navigation buttons to move the slider up or down then press OK 3 Press D to exit Audio feedback for the visually impaired This feature enables audio feedback when buttons are pressed on the remote control or TV 1 In the Universal access menu press the blue button to select Key beep 2 Press th
31. ect in your room During TV standby press on the side of the TV Note It may take more than 5 seconds for the lounge light to switch on To select another lounge light colour see Use your TV gt Use Ambilight gt Setup Ambilight Page 19 Enjoy Net TV What is Net TV Koninklijke Philips Electronics N V bears no responsibility for content provided by Net TV service providers EN 20 Net TV offers Internet services and websites tailored for your TV You can visit popular sites for music videos and infotainment directly on your TV New services New services are added regularly Access the Net TV pages regularly to discover new services Notes et TV services vary in each country e With Net TV you can link up to the nternet or view any website However some websites are not tailored to be viewed on a TV screen and certain plug ins for example to view pages or videos are not available on your TV e The number of services available on et TV can change The functionality of services can change as well These changes are updated automatically You can view the latest services added or changed in the New category e Net TV displays one page at a time and in full screen e _ You cannot download and save files or install plug ins on this TV What you need To enjoy Net TV connect the TV to a router with a high speed connection to the Internet Read more at Setup the
32. ectly from the Internet You need a high speed Internet connection 1 Press ff gt Setup gt Update now and press OK 2 Select Internet and press OK Follow the instructions on screen When the update is done the TV switches off and back on again automatically Wait for the TV to switch back on do not use the Power switch on the TV If the TV is connected to the Internet the TV displays a message about the availability of new software at start up On screen Help Before updating the on screen Help ensure you have the following e An empty USB flash drive The USB flash drive must be FAT or DOS formatted e Do not use a USB hard drive e A PC with Internet access e An archive utility that supports the ZIP file format for example WinZip for icrosoft Windows or Stufflt for acintosh Before updating Help check the current version installed on your TV If the version of Help on your TV is lower than the version available at www philips com support download and install the latest Help file 1 Press ft 2 Select Help then press OK On screen Help is displayed 3 Select Technical data gt Dimensions Navigate to the last page of this section and note the version number Note The version number is a 12 digit number where the last digit indicates the version of Help installed in your TV For example if the version in the TV is 3139 137 03583 3 represents the vers
33. edented improvement in viewing experience The light also reduces eyestrain thus providing a more relaxing viewing experience See Use your TV gt Use Ambilight Page 19 Digital TV n addition to normal analog TV broadcasts your TV can receive SATVD T or SBTVD 1 broadcasts Programme guide EPG Electronic Program Guide EPG is an on screen guide available for digital channels EPG allows you to e View a list of digital programs being broadcast e _ View upcoming programs e Group programs by genre e _ Set reminders when programs start e Setup preferred EPG channels Notes e EPG is not available in all countries e For more information on EPG see Use more of your TV gt Use EPG Page 24 EN 12 Net TV Net TV allows you to enjoy movies music and other infotainment from the Internet directly on your TV screen See Use your TV gt Enjoy Net TV To enjoy Net TV you must connect the TV to a network See Setup the TV gt Set up network Page 31 DTVi Use DTVi applications to view TV program information play games and respond interactively to TV programs See Use more of your TV gt Access DTVi applications Page 28 Multimedia View or play your own multimedia files such as photos music and videos from the USB connection on the side of the TV See Use more of your TV gt Access multimedia Page 25 Access more information On screen You are reading the on screen user manu
34. enings on the TV e When the TV is swivelled ensure that no strain is exerted on the power cord Strain on the power cord can loosen connections and cause arcing e Never place the TV remote control or batteries near naked flames or other heat sources including direct sunlight To prevent the spread of fire keep candles or other flames away from the TV remote control and batteries at all times Risk of short circuit or fire e Never expose the remote control or batteries to rain water or excessive heat e _ Avoid force coming onto power plugs Loose power plugs can cause arcing or fire Risk of injury or damage to the TV e Two people are required to lift and carry a TV that weighs more than 25kg 55lbs e When stand mounting the TV use only the supplied stand Secure the stand to the TV tightly Place the TV on a flat level surface that can support the combined weight of the TV and the stand e When wall mounting the TV use only a wall mount that can support the weight of the TV Secure the wall mount to a wall that can support the combined weight of the TV and wall mount Koninklijke Philips Electronics N V bears no responsibility for improper wall mounting that results in accident injury or damage e Before you connect the TV to the power outlet ensure that the power voltage matches the value printed on the back of the TV Never connect the TV to the power outlet if the voltage is differe
35. erred language For more information see Set up the TV gt Change language settings gt Menu language When turning the TV on off to standby you hear a creaking sound from the TV chassis No action is required The creaking sound is normal expansion and contraction of the TV as it cools and warms up This does not impact performance When the TV is in standby mode a startup splash screen is displayed then returns to standby mode This is normal behavior The startup screen is displayed when the TV is disconnected from the mains and reconnected To switch on the TV from standby press on the remote control or press any key on the side of the TV TV channel issues Previously installed channels do not appear in the channel list Check that the correct channel list is selected No digital channels were found during the installation Check that the TV supports SBTVD T or SATVD T in your country See the listed countries on the back of the TV Picture issues The TV is on but there is no picture or the picture is distorted e Check that the antenna is properly connected to the TV e Check that the correct device is selected as the TV source e Check that the external device or source is properly connected EN 53 English There is sound but no picture Check that the picture settings are correctly set There is poor TV reception from an antenna connection e Check that the antenna is prope
36. es for a network connection f asked for agree to the End User License Agreement Find the latest End User License Agreement at www philips com Wi Fi Ready Project your PC Introduction This TV is Wi Fi Ready With the Wireless USB adapter PTAO1 accessory sold separately you can connect the TV to your network wirelessly With the free Wi Fi MediaConnect software you can project your PC screen on the TV Video music or presentations that you play on your PC can be projected Available on certain models only What you need To use Wi Fi MediaConnect you need to connect the TV to your home network You need a wireless router EN 32 Read more about connecting to a network in Help gt Setup the TV gt Setup network Page 31 Project your PC Install Wi Fi MediaConnect 1 Find the Wi Fi MediaConnect CD ROM that comes bundled with the PTAO1 adapter 2 Insert the CD ROM in your PC 3 Your PC starts your Internet browser and opens the Wi Fi MediaConnect download page www wifimediaconnect philips com On the website you can check the necessary PC system requirements 4 Enter the code printed on the CD ROM envelope 5 Click the Download now button to download the free Wi Fi MediaConnect software 6 Once downloaded start the file Wi Fi MediaConnect setup exe 7 Follow the on screen instructions Project your PC Name your TV If you have two or more TVs in your home network
37. esolution and refresh rate e Set the TV picture format to unscaled Sound issues There is picture but no sound from the TV If no audio signal is detected the TV automatically switches the audio output off this does not indicate malfunction e Check that all cables are properly connected e Check that the volume is not set to 0 e Check that the sound is not muted e Check that the TV speakers setting is on in the sound menu e Check that the TV audio output is connected to the audio input on the DMI CEC enabled EasyLink compliant TS device Sound should be heard from the HTS speaker a There is picture but sound quality is poor Check that the sound settings are correctly set There is picture but sound comes from one speaker only Verify that sound balance is set to the center HDMI connection issues There are problems with HDMI devices e _ Note that HDCP High bandwidth Digital Content Protection support can delay the time taken for a TV to display content from a HDMI device e If the TV does not recognize the HDMI device and no picture is displayed try switching the source from one device to another and back again e If there are intermittent sound disruptions check that output settings from the HDMI device are correct e If you use an HDMI to DVI adapter or HDMI to DVI cable check that an additional audio cable is connected to AUDIO L R or AUDIO IN mi
38. ess ll to receive audio from the connected Philips EasyLink device If available audio only mode is enabled Accept the prompt on the TV to enable audio only mode e _ Control the audio playback with the TV remote control Enable or disable EasyLink Remote Control Caution This is an advanced setting Verify that all connected HDMI CEC compliant devices support this setting Devices that do not support this setting will not respond to commands from the TV remote control 1 Press ft 2 Select Setup gt TV settings gt EasyLink gt EasyLink Remote Control gt On or Off 3 Press OK to activate Notes e _ If you cannot exit from the connected device s menu press gt e To switch back to TV control press f and select Watch TV e To control another device press f and select the device from the home menu e A summary of EasyLink buttons you can use with the TV remote control is available at Connect the TV gt Use Philips EasyLink gt EasyLink buttons Page 51 EasyLink buttons Control HDMI CEC compliant devices with the following buttons on the TV remote control e OK Starts pauses or resumes playback on the connected device Also activates a selection or accesses the menu of the device i Previous Next Searches backwards and forwards on the connected device e Numeric buttons When EasyLink is enabled selects a title chapter or track e E
39. ews Applies sound settings ideally suited for spoken audio such as the news 3 rol e Movie Applies sound settings ideally suited for movies e Game Ideal settings for gaming e Drama Applies sound settings ideally suited for drama e Sports Applies sound settings ideally suited for sports De 3 Press OK to confirm your choice 4 Press D to exit More sound settings 1 Press ft 2 Select Setup gt TV settings gt Sound then press OK 3 Select a setting to adjust e Smart sound Accesses pre defined smart sound settings e Reset Resets to factory default settings e _ Bass Adjusts the bass level e Treble Adjusts the treble level e _ Surround Enables spatial sound e Headphones volume Adjusts headphone volume e Auto volume leveling Automatically reduces sudden volume changes for example when switching channels e Balance Adjusts the balance of the left and right speakers to best suit your listening position EN 30 Reset to factory settings Resetting your TV to factory settings restores default picture and sound settings Channel installation settings remain the same 1 While watching TV press ft 2 Select Setup gt TV settings gt Factory settings then press OK TV settings are reset back to the factory default Start a TV demo Start a demo to find out more about your TV s features Note De
40. f 3 Press OK to activate EN 52 6 Troubleshooting Contact us f you cannot resolve your problem refer to he FAQs for this TV at www philips com support f the problem remains unresolved contact Philips Consumer Care in your country as isted in the leaflet accompanying your product ake a note of your TV model and serial number before you contact Philips These numbers are printed on the back of the TV and on the packaging Warning Do not attempt to repair the TV yourself This may cause severe injury irreparable damage to your TV or void your warranty General TV issues The TV does not switch on e Disconnect the power cable from the power outlet Wait for one minute then reconnect it e Check that the power cable is securely connected e Check that the power switch at the bottom back of the TV is switched on The TV does not respond to remote control or side controls when switched on The TV requires some time to start up During this time the TV will not respond to he remote control or side controls This is normal behavior The standby light on the TV blinks red Disconnect the power cable from the power outlet Wait until the TV cools down before reconnecting the power cable If the blinking reoccurs contact Philips Consumer Care You forgot the code to unlock the child lock feature Enter 8888 The TV menu is in the wrong language Change the TV menu to your pref
41. favorite list The star disappears if you remove the channel from the favorite list Select a favorite list View only channels in a favorite list or view all channels if a favorite list is currently selected 1 In the channel list press B 2 Select Select list gt Favourites to display channels in a favorite list or All to display all channels 3 Press OK to confirm your choice Use EPG Overview The Electronic Program Guide EPG is an on screen guide available for digital channels EPG allows you to e View a list of digital programs being broadcast e _ View upcoming programs e Group programs by genre e _ Set reminders when programs start e Setup preferred EPG channels Note EPG is not available in all countries Switch on EPG 1 Press W 2 Select Programme guide then press OK EN 24 EPG options Use the EPG options menu to set or clear reminders change day and access other useful EPG options Depending on the broadcast service these options are available only for seven or eight days 1 When in EPG press B 2 Press the Navigation buttons and OK to select and adjust one of the following settings e Set reminder Sets program reminders e Clear reminder Clears program reminders Change day Sets the EPG day Select Today Next day or Previous day e More info Views program information e _ Search by genre Searches TV programs by genre e
42. for your country select Services and press OK On this page you can view all services or view them by category e g News or Entertainment To view the services by category select a category in the column on the left and press OK Options Press B Options to select the following e _ Lock service e _ Mark favorite e Disable parental control e Show remote control e Reload page e Zoom page e _ Security info e Clear Net TV memory EN 21 English Lock service To lock a Net TV service select its icon and press B Options Select Lock service and press OK The service icon is marked with a lock icon To open a locked service you must enter your 4 digit code Once you have opened a locked service you can delete the lock Mark favourites To mark a service as a favourite select the service icon and press B Options Select Mark favourite and press OK You can mark up to 12 services as favourites All your favourite services are shown in the Net TV Start page In Services favourite services are marked with a star Only Net TV services can be marked as favorites Advertisements and Internet websites cannot be marked Unmark favourites To Unmark a favourite select the icon of a favourite service and press E Options and select Unmark favourite Disable parental control To switch off Parental control press B Options and select Disable parental control Enter the 4 digit code to
43. frequently used menus e the Home menu ft e the Browse menu WH e the Options menu EN 5 English e the Experience menu ON PHILIPS In the Home menu ft you can select the source to watch such as a TV channel or movies from a connected DVD player or USB flash drive You can also add a new device or access the Setup menu for more settings PHILIPS In the Browse Menu E you can access Teletext the channel list or the electronic Program Guide EPG EPG is not available in all countries EN 6 PHILIPS In the Options menu B you can select settings related to what is shown on screen For example while you watch a channel you can mark it as a favorite PHILIPS In the Experience menu OM you can quickly adjust Ambilight picture and sound settings You can select the ideal picture setting for movies games or music Or you can change the picture format of the on screen image You can even change the surround settings for the TV speakers Available on certain models only You can also find the answer in Search for Press a to select the next TV tour Connect devices The HDMI connection offers the best picture and sound quality If you connect a device to this TV access the Home menu to add it Press ff gt Add your devices then follow the on screen instructions Ensure that you select the correct TV connector which the device is connected to Read more in Help
44. gt Use your TV gt Basic TV Menus gt Add your devices Page 16 If you connect an EasyLink HDMI CEC compliant device to the TV it is automatically added to the Home menu Access the Home menu and select the newly added device icon Read more in Help gt Connect the TV gt Use Philips EasyLink Connect DVD players Blu ray Disc players Page 49 or game consoles through HDMI In Help gt Connect the TV Page 38 you can learn to connect the most common devices through illustrations for example High Definition TV e a digital HD receiver connected with an HDMI cable playing HD content from a cable or satellite operator e a HD channel on your DVB C network You can watch High Definition HD programs in HD picture quality If you watch non HD programs the picture e aHD game console for example quality will be similar to non HD TVs X Box 360 or PlayStation 3 connected Your TV can display HD video content from with an HDMI cable playing a HD game e a Blu ray disc player connected with a HDMI cable playing a Blu ray disc HD video clip E To experience the stunning sharpness and e an upscaling DVD player connected picture quality of HD TV you can watch the DE ge playing a DVD disc High Definition video clip from the Home e an over the air HD broadcaster DVB T menu Press ff gt Setup gt Watch MPEG4 demos on the second page of the setup menu
45. gurations see Connect the TV gt Use Philips EasyLink gt TV speakers Page 51 EN 50 EasyLink Remote Control EasyLink Remote Control allows you to control HDMI CEC compliant devices using your TV remote control To enable EasyLink Remote Control see Connect the TV gt Use Philips EasyLink gt Enable or disable EasyLink Remote Control Page 51 Pixel Plus Link Connected Philips EasyLink devices may apply their own picture quality processing to a video before streaming it to the TV This may interfere with the image processing of the TV Enable Pixel Plus Link to discard picture quality processing from connected Philips EasyLink devices To enable Pixel Plus Link 1 Press ft 2 Select Setup gt TV settings gt EasyLink gt Pixel Plus link gt On 3 Press OK to activate Auto subtitle shift Auto subtitle shift displays subtitles from Philips EasyLink compliant Home Theatre Systems over the video image on your TV The video image is thus stretched across the whole of your TV display without the need to create a separate subtitle bar at the bottom of the screen To enable auto subtitle shift 1 Press ft 2 Select Setup gt TV settings gt EasyLink gt Auto subtitle shift 3 Select On then press OK to activate Audio only mode Audio only mode enables you to play audio from a connected Philips EasyLink device through the TV speakers while the TV is in standby Pr
46. hing TV press 1 Press the Navigation buttons to select an item e Channel list Accesses the TV channel list e Programme guide Accesses the Electronic Program Guide 2 Press OK to confirm your choice Experience Press ON to access the experience menu which provides a range of frequently used settings The experience menu gives you easy access to e _ Ambilight Turns Ambilight on or off e Ambilight dynamic Adjusts the speed of Ambilight response e Picture format Changes the picture format EN 15 English e Smart picture Frequently used picture settings e _ Smart sound Frequently used sound settings e Speakers Configure TV speakers for Philips EasyLink e Picture shift Adjusts the position of the picture Channel list The channel list displays the TV channels and possible radio stations installed on your TV 1 While watching TV press W 2 Select Channel list then press OK 3 Select a channel then press OK to access the channel 4 Press D to exit the channel list without changing the channel Add your devices After you connect a device to the TV add this device in the home menu for easy access In the home menu select Add your devices then press OK Follow the instructions on screen to add the device to the home menu To remove a device from the home menu select the item press EF and select Remove this device Press OK Se
47. ick the link to the registration form Complete the form and click the button to submit On the TV select OK and press OK to open the Net TV Start page Switch on Parental control The first time you open the Net TV Start page you can switch on parental control If you switch on parental control you need to enter a personal lock unlock code Enter a 4 digit code as your Net TV lock unlock code Use the Numeric buttons on the remote control Enter the same code again to confirm Net TV is ready for use Browse Net TV Access the Net TV home page 1 Press ft 2 Select Browse Net TV then press OK The TV links up to Net TV and opens the start page To exit Net TV press ft and select another activity The Start page The Start page shows your favorite services and some recommended services You can browse Net TV from this page To retum to the Start page press WJ Browse Open a Net TV service Select a Net TV service with the Navigation buttons To open a selected service press OK A closing lock animation means that the page you have opened is a secure page Navigate a Net TV service avigating within a Net TV service can differ from one service to another You can use he Navigation buttons and the OK button o browse the service Some services indicate how to browse their services To go back to the previous page press D Back All services To view the available services
48. ings then press OK 3 Select Start then press OK Follow the on screen instructions to choose your preferred settings Smart picture settings Use the Smart picture experience menu o access frequently used picture settings 1 While watching TV press INL 2 Select Smart picture then select one of he following settings e Personal Sets the TV to your personal preferences set in the Picture menus in Setup e Vivid Rich and dynamic settings ideal for daylight use e Natural A natural picture setting e Cinema Ideal settings for watching movies e Game Ideal settings for gaming e Energy saving The most energy conscious settings Standard Adjusts picture settings to suit most environments and types of video Factory default settings e Photo Ideal settings for viewing photos e _ Custom Allows you to customize and store personal picture settings 3 Press OK to confirm your choice 4 Press D to exit More picture settings 1 Press ft 2 Select Setup gt TV settings gt Picture then press OK 3 Select a setting to adjust e Smart picture Accesses pre defined smart picture settings e Reset Resets to factory default settings e _ Contrast Adjusts the intensity of bright areas keeping dark areas unchanged e Brightness Adjusts the intensity and details of dark areas e Colour Adjusts color saturation e _ Hue Compensa
49. ink e The HDMI ARC connector on the TV features HDMI ARC functionality This allows output of TV audio to a HDMI ARC compliant device EN 38 e Do not use an HDMI cable longer than 5 meters 16 4 feet kkrk 0O oooooo ooo HDMI Y Pb Pr Use the Component Video Y Pb Pr connection together with an Audio Left and Right connection for sound Match the Y Pb Pr connector colours with the cable plugs when you connect Y Pb Pr can handle High Definition HD TV signals 000e YPbPr 00000 YPbPr S000 Audio L R TV connectors overview Rear connectors 1 CVI 2 Analog audio and video input from analog or digital devices such as DVD players or game consoles 2 NETWORK Data input from a network 3 SERV U For use by service personnel only 4 AV IN Analog audio and video input from analog or digital devices such as DVD players satellite receivers and VCRs 5 Available in selected models only Stereo audio output to headphones or earphones EN 39 English Bottom connectors 1 CVI 1 Audio L R and YPbPr Video input from analog devices such as DVD receiver game console etc This connector is used with audio input 2 DIGITAL AUDIO OUT Digital audio output to home theaters and other digital audio systems 3 HDMI Your TV may have one or two HDMI connectors depending on your model Digital audio and video input from high definition digital devices such as Blu ray
50. ion of Help currently installed 1 Insert the empty USB flash drive into a USB connector on your PC 2 On your PC create a folder named upgrades in the root directory of the USB flash drive 3 In your web browser navigate to www philips com support 4 At the Philips Support site find your product and locate the Help file for your TV The Help file a upg file is compressed into a zip archive 5 If the Help file at the Philips Support site is a later version than the file in your TV click it to save the file to the USB flash drive 6 Using the archive utility extract the zip file to the upgrades folder in the USB flash drive 7 The upg Help file is extracted 8 Disconnect the USB flash drive from the PC e Do not switch off the TV or remove he USB flash drive during the update e Ifa power failure occurs during the update do not remove the USB flash drive from the TV The TV will continue he update as soon as power is restored e Ifan error occurs during the update retry the procedure If the error reoccurs contact Philips Consumer Care 1 Switch on the TV 2 Connect the USB flash drive containing the upg Help file to the USB connector on the TV Disconnect all other USB devices from the TV 3 Press ft 4 Select Setup gt Software settings gt Local updates The updates screen appears 5 Select the upg Help file and press OK
51. it the mounting location of the TV 1 In the Preferences menu select TV placement gt On a TV stand or Wall mounted then press OK Update software TV software 1 Press ft 2 Select Setup gt Software settings gt Current software info then press OK The version of the current software is displayed To update the software use one of these options a update from digital broadcast b update with USB c update from the Internet For mo pages f available your TV can receive software updates via digital broadcasts fan update is available a message appears prompting you to update the software We strongly recommend that you update the software when prompted re information see the following Before performing this procedure be sure to e _ Set aside some time to complete the entire update ave available a USB flash drive with at east 256MB of storage space ave access to a computer with a USB port and intemet access EN 36 1 Press ft 2 Select Setup gt Update software then press OK The update assistant starts Follow the on screen instructions to complete the update Note If you already have the upgrade file downloaded onto a USB flash drive connect it to the TV Then select Setup gt Software settings gt Local updates If the TV is connected to a router which is connected to the Internet you can update the TV software dir
52. mos are not supported on MHEG channels 1 While watching TV press ft 2 Select Setup gt Watch demos then press OK 3 Select a demo then press OK 4 Press D to exit the demo Change channel settings Rename channels After installation you may want to rename channels to suit your preference 1 While watching TV press W 2 Select Channel list then press OK 3 In the channel list press B 4 Select Rename then press OK 5 In the entry screen that appears press the Navigation buttons or Numeric buttons to edit the name then press OK 6 Once complete press the Navigation buttons to select Done e To clear the entry select Clear e To cancel select Cancel 7 Press OK to confirm your choice 8 Press D to exit Hide or unhide channels Hide channels Hide channels from the channel list to prevent unauthorized access 1 While watching TV press W 2 Select Channel list then press OK 3 In the channel list select the channel to hide then press B 4 Select Hide channel then press OK The channel is hidden Unhide channels While watching TV press W 2 Select Channel list then press OK 3 In the channel list press EF 4 Select Show hidden channels then press OK Hidden channels appear in the channel list but without channel information displayed 5 Select the channel to unhide then press B 6 Select Unhide channel then press OK
53. ni jack only You cannot use EasyLink features Check that your HDMI devices are HDMI CEC compatible EasyLink features only work with devices that are HDMI CEC compatible If a HDMI CEC compliant audio device is connected to the TV and the TV does not display any mute or volume icon when the volume is muted increased or decreased This behavior is normal when a HDMI CEC audio device is connected USB connection issues USB device content is not displayed e Check that the USB storage device is set to Mass Storage Class compliant as described in the storage device s documentation e Check that the USB storage device is compatible with the TV e Check that the audio and picture file formats are supported by the TV Audio and picture files do not play or display smoothly The transfer performance of the USB storage device may limit the data transfer rate to the TV causing poor playback Network connection issues Applicable to certain models only Net TV does not work If the connection to the router is properly set up check the router connection to the Internet Browse PC or Net TV access is slow Refer to your router s user manual for information on transfer rate and other factors of signal quality You need a high speed Internet connection for your router EN 55 English 7 Technical data Overview Product information is subject to change without notice For detailed product informati
54. nt Risk of injury to children Follow these precautions to prevent the TV from toppling over and causing injury to children ever place the TV on a surface covered by a cloth or other material hat can be pulled away e Ensure that no part of the TV hangs over the edge of the mounting surface e ever place the TV on tall furniture such as a bookcase without anchoring both the furniture and TV to the wall or a suitable support e Educate children about the dangers of climbing on furniture to reach the TV Risk of overheating ever install the TV in a confined space Always leave a space of at least 4 inches around the TV for ventilation Ensure curtains or other objects never cover he ventilation slots on the TV Risk of injury fire or power cord damage ever place the TV or any objects on he power cord e To easily disconnect the TV power cord from the power outlet ensure that you have full access to the power cord at all imes e When you disconnect the power cord always pull the plug never the cable e Disconnect the TV from the power outlet and aerial before lightning storms During lightning storms never touch any part of the TV power cord or aerial cable Risk of hearing damage Avoid using earphones or headphones at high volumes or for prolonged periods of time Low temperatures If the TV is transported in temperatures below 5 C 41 F unpack the TV and wait
55. ocks gt Sleeptimer Page 25 Set a picture as Scenea Note The file size of the picture must not be more than 1MB 1 Connect the USB storage device to the TV 2 Press ft 3 Select Browse USB then press OK 4 Select a picture then press E 5 Select Set as Scenea then press OK 6 Select Yes then press OK 7 Press any key to exit Scenea Universal access Enable universal access Where supported by your digital TV broadcaster this TV allows special audio and subtitles for the hearing impaired as well as special audio for the visually impaired To enable these features you must tum on universal access in the Preferences menu 1 Press ft 2 Select Setup gt TV settings gt Preferences gt Universal access gt On then press OK Hearing impaired Some digital TV channels broadcast special audio and subtitles adapted for people who are hearing impaired To switch on hearing impaired audio and subtitles if available 1 While watching TV press B 2 Press the red button to select Hearing impaired 3 Press the green button to switch on hearing impaired audio and subtitles press the red button to switch it off 4 Press D to exit Tip To verify whether a hearing impaired audio language is available press and select Audio language Languages with an ear icon indicate hearing impaired support Visually impaired Some digital TV channels broadcast sp
56. ome menu 3 B Browse Accesses the browse menu to select TV channel list and the Electronic Program Guide 4 arar Navigation buttons Navigates menus and selects items 5 mra Previous Next Selects the previous or next channel Skips to the previous or next page of the menu Also skips to the previous or next track album or folder 6 OK Confirms an entry or selection EN 13 English Batteries Open the battery cover on the back of the remote control to insert the batteries Type AAA LRO3 1 5V Make sure the and ends of the batteries line up correctly and are marked inside 7 W Experience Accesses the experience Remove the batteries if you are not using men the remote control for a long time Dispose 8 B Options Accesses options for the of batteries according to the end of use current activity or selection directives Read Get started gt Important gt 9 Volume and amp Mute Increases or End of use Page 10 decreases volume mutes or restores audio 11 0 9 Numeric buttons Selects a channel or setting 12 a Dot Press the dot for digital channels Note The location of the battery compartment on some remote controls may be as follows 13 EXIT Exits a menu 14 D Back Returns to a previous menu screen Press and hold to return to watching TV EN 14 On screen remote control Note Available if the connected device is
57. on go to www philips com support Power and reception Power e Mains power AC 110 240V 50 60Hz e _ Standby power lt 0 15W e Ambient temperature 5 to 40 degree Celsius e For power consumption see the product specifications at Reception e _ Antenna input 5ohm coaxial F type e TV system PALM PAL N NTSC M SATVD T SBTVD T e _ Video playback NTSC PAL Display and sound Picture Display e Display type LCD Full HD W UXGA e Diagonal size 32 inch 81 cm 40 inch 102 cm 46 inch 117 cm 52 inch 132 cm e Aspect ratio Widescreen 16 9 e _ Panel resolution 1920x1080p 100Hz e 1080p 24 25 30 50 60Hz processing e 120 Hz LCD Sound e Output power RMS 20W e Incredible Surround e _ Clear Sound e _ Dynamic Bass Enhancement e Mono Stereo EN 56 Display resolutions Computer formats HDMI Resolution refresh rate 640 x 480 60Hz 800 x 600 60Hz 1024 x 768 60Hz 1360 x 768 60Hz 1280 x 1024 60Hz 1600 x 1200 60Hz 1920 x 1080 60Hz Computer formats VGA Resolution refresh rate 640 x 480 60Hz 800 x 600 60Hz 1024 x 768 60Hz 1360 x 768 60Hz 1280 x 1024 60Hz 1600 x 1200 60Hz 1920 x 1080 60Hz Video formats Resolution refresh rate 480i 60Hz 480p 60Hz 576i 50Hz 576p 50Hz 720p 50Hz 60Hz 1080i 50Hz 60Hz 1080p 24Hz 25Hz
58. ordinated Universal Time UTC If your TV cannot receive UTC transmissions set the clock mode to Manual Country dependent applies UTC and gives you the option of setting Daylight saving 1 While watching TV press ft 2 Select Setup gt TV settings gt Preferences gt Clock gt Auto clock mode 3 Select Automatic Manual or Country dependent then press OK Enable or disable daylight saving If clock mode is set to Country dependent enable or disable daylight saving if required for your time zone 1 In the Clock menu select Daylight saving gt Daylight saving time or Standard time then press OK Daylight saving is enabled or disabled for your time zone Set the clock manually If clock mode is set to Manual set the date and time manually 1 In the Clock menu select Date or Time then press OK 2 Use the Navigation buttons to make your selection then select Done TV location A range of TV settings are applied to suit the location of the TV Shop or home mode The flexibility to change settings is limited if the TV location is set to Shop mode Set the TV location to Home mode to access all TV settings EN 35 English 1 While watching TV press ft 2 Select Setup gt TV settings gt Preferences gt Location gt Home or Shop then press OK 3 Restart the TV Stand mount or wall mount Specific TV settings are applied to su
59. r The remote control PHILIPS To switch TV channels PHILIPS To open or close the Home menu ff In the Home menu you can access connected devices picture and sound settings and other useful features PHILIPS To open or close the Browse menu In the Browse menu you can access Teletext the channel list or the electronic Program Guide EPG EPG is not available in all countries EN English PHILIPS PHILIPS To open or close the Experience menu ON Back D In the Experience menu you can access a To return to the previous TV channel or range of frequently used settings menu Press and hold to return to watching TV PHILIPS To open or close the Options menu E Red Options menus offer convenient settings E related to what is on screen To select the red option access digital Interactive TV services or watch TV demonstration clips Available on certain models only EN 4 PHILIPS Green To select the green option or the energy efficient settings PHILIPS Yellow To select the yellow option PHILIPS Blue To select the blue option or to open the Widgets Available on certain models only Read more about the remote control in Help gt Use your TV gt Remote control gt Overview Page 13 Alternatively find the answer in Search for Press a to select the next TV tour The TV menus PHILIPS Let s learn more about these
60. re with other devices and click OK In the Add To Library window the newly added folder is shown You can add more folders to share Click the OK button to add the files to the library You can now enjoy music photos and videos on your TV Change other settings Energy efficient settings 1 While watching TV press the green button 2 Select one of the following settings then press OK e Energy saving Applies a combination of picture settings to reduce energy consumption e Mute screen Turns off the TV display Muting the screen saves energy if you just want to listen to audio from the TV e Light sensor To save energy the built in ambient light sensor lowers the brightness of the TV screen when the surrounding light darkens Audio lipsync Turn on digital audio lipsync to automatically sync the image on your TV to audio from a connected Home Theatre System 1 While watching TV press ft 2 Select Setup gt TV settings gt Preferences gt Audio Out delay gt On then press OK TV clock You can display a clock on the TV screen The clock displays the current time using time data received from your TV service operator Display the TV clock 1 When watching TV press B 2 Select Status then press OK The clock displays on the lower right hand comer of the TV screen Change the clock mode By default the clock mode is set to Automatic syncing the TV clock to Co
61. rly connected to the TV e _ Loud speakers unearthed audio devices neon lights high buildings and other arge objects can influence reception quality If possible try to improve the reception quality by changing the antenna direction or moving devices away from the TV e f reception on only one channel is poor fine tune this channel There is poor picture quality from connected devices e Check that the devices are connected properly e Check that the picture settings are correctly set The TV did not save your picture settings Check that the TV location is set to the home setting This mode offers you the flexibility to change and save settings The picture does not fit the screen it is too big or too small Try using a different picture format The picture position is incorrect Picture signals from some devices may not fit the screen correctly Check the signal output of the device he picture from broadcasts is scrambled ou may need to use a Conditional Access odule to access content Check with your operator T Y An e sticker banner displaying information appears on the TV display The TV is in Shop mode Remove the e sticker by setting the TV to Home mode then restarting the TV See Setup the TV gt Change other settings gt TV location Page 35 for more information The computer display on the TV is not stable EN 54 e Check that your PC uses the supported r
62. s enabled in the Picture menu 16 9 stretch Stretches to 16 9 format and removes the logos Notes e Depending on the picture source some picture formats are not available and will not be seen on screen Watch a connected device Add new device Notes e _ Before watching a connected device you must add it to the home menu e HDMIARC compliant devices connected to the HDMI ARC connector on the TV are automatically added to the home menu 1 Connect and switch on the device 2 Press ft 3 Select Add your devices then press OK Follow the on screen instructions Watch connected device 1 Press ft 2 Select the device from the home menu 3 Press OK to confirm your choice Use Ambilight Switch on Ambilight Enjoy a more relaxed viewing experience and improved perceived picture quality Dim the lighting conditions in the room for the best Ambilight effect Caution To avoid bad infrared remote control reception place your devices out of sight of Ambilight 1 Press Ml Experience 2 Select Ambilight then press OK 3 To switch on or off Ambilight select On or Off You can also press on the TV to switch Ambilight on or off Setup Ambilight In the Ambilight menu you can access more Ambilight settings While watching TV press ff gt Setup gt TV settings gt Ambilight Select a setting to adjust e Dynamic Adjusts Ambilight between relaxed and d
63. s in Setup e _ Standard Adjusts sound settings to suit most environments and types of audio e _ News Applies sound settings ideally suited for spoken audio such as the news e Movie Applies sound settings ideally suited for movies e Game Ideal settings for gaming e Drama Applies sound settings ideally suited for drama e Sports Applies sound settings ideally suited for sports 3 Press OK to confirm your choice 4 Press D to exit Change picture format Change the picture format to suit your viewing experience 1 Press I0 2 Press ar to select Picture format and press OK 3 Press ar to select a picture format then press OK to confirm your choice Note Picture formats are also accessible via the Setup menu The following picture formats can be selected e Auto fill Adjusts the picture to fill the screen subtitles remain visible Recommended for minimal screen distortion but not for HD or PC e Auto zoom Enlarges the picture to fill the screen Recommended for minimal screen distortion but not for HD or PC e Super zoom Removes the black bars on the sides of 4 3 broadcasts Not recommended for HD or PC e Movie expand 16 9 Scales the classic 4 3 format to 16 9 Not recommended for HD or PC e Wide screen Stretches the classic 4 3 format to 16 9 e Unscaled Provides maximum detail for PC Only available when PC mode i
64. t directories Media files are ready to be accessed from the TV Note The instructions are applicable to both Microsoft Windows XP and Vista Enable media sharing In Microsoft Windows start Windows Media Player 11 Windows Media Player appears In the Media Sharing window check the Share my Media and click OK If no network connection is found and you are unable to check this box click the Networking button to show the Network and Sharing Center window Set Network discovery to On Set File sharing to On Go back to the Media Sharing window in Windows Media Player and check the Share My Media box Click OK EN 34 When the TV is connected by the router to the PC and everything is switch on the Media Sharing window will detect the TV as an Unknown Device Select the device and click Allow To change particular settings on media sharing open the Settings window When the device icon the TV is checked with a green tick click OK Set folders for sharing In Windows Media Player select Library from the menu and select Add to Library pens Gr In the Add to Library window select My folders and those of others that can access and click the Advanced Options button With Advanced Options open you can add specific folders to the list to share and click Add In the Add Folder window select a folder with music photos or videos which you want to sha
65. t TV start page What you need To connect the TV to a PC network and internet you need a router in your PC network Set the router to DHCP On Connect the router to the TV with a network Ethernet cable To enjoy Net TV connect the TV to a router with a high speed connection to the intemet You can also connect this TV to a PC network wirelessly via an optional wireless USB adaptor Check with your local retailer for purchase details Internet j 22 Router The PC network feature is DLNA 1 5 certified You can use Microsoft Windows XP or Vista Intel Mac OSX or Linux on your computer EN Bil English To share PC content on your TV you need recent media server software on your computer Windows Media Player 11 or similar The media server software needs to be set to share files with your TV For the list of supported media server software read Technical data gt Multimedia Page 57 Note In case the apparatus does not recover in DLNA mode due to external electrical disturbances e g electrostatic discharge user intervention is required Wired installation Connect the router to the TV using a network cable and switch on the router before you start the network installation To start the wired network installation close he user manual press gt Setup gt Connect to network and press OK Follow the instructions on screen to install he wired network The TV constantly search
66. tes color variations in NTSC encoded transmissions e Sharpness Adjusts sharpness in the image e Noise reduction Filters and reduces noise in an image e Colour Temperature Adjusts the color balance in an image e Colour Temperature Customizes tint setting e Pixel Plus HD Pixel Precise HD Accesses advanced settings including HD Natural Motion 120 Hz Clear LCD Advanced sharpness Dynamic contrast Dynamic backlight MPEG artefact reduction Colour enhancement Gamma e PC mode Enables picture settings adjustment when a PC is connected to the TV via HDMI If enabled you can select Picture format gt Unscaled which provides maximum detail for display of PC content e Light sensor Adjusts settings dynamically to match lighting conditions e Picture format Changes the picture format e _ Screen edges Changes the picture size e Picture shift Adjusts the position of the picture Not applicable if selected picture format is Auto zoom or Wide screen EN 29 English Smart sound settings Use the Smart sound experience menu to access frequently used sound settings 1 While watching TV press IED 2 Select Smart sound then select one of the following settings e Personal Sets the TV to you personal preferences set in the Sound menus in Setup e _ Standard Adjusts sound settings to suit most environments and types of audio e N
67. the side of the TV To mute or unmute sound e Press amp to mute the sound e Press amp again to restore the sound Use the Sound menu to adjust headphone volume For more information see Setup the TV gt Change picture and sound settings gt More sound settings Page 30 Use Smart picture settings Use the Smart picture experience menu to access frequently used picture settings 1 While watching TV press INL 2 Select Smart picture then select one of the following settings e Personal Sets the TV to your personal preferences set in the Picture menus in Setup e Vivid Rich and dynamic settings ideal for daylight use e Natural A natural picture setting e Cinema Ideal settings for watching movies e Game Ideal settings for gaming e Energy saving The most energy conscious settings e _ Standard Adjusts picture settings to suit most environments and types of video Factory default settings e Photo Ideal settings for viewing photos EN 18 e _ Custom Allows you to customize and store personal picture settings 3 Press OK to confirm your choice 4 Press D to exit Use Smart sound settings Use the Smart sound experience menu to access frequently used sound settings 1 While watching TV press INL 2 Select Smart sound then select one of the following settings e Personal Sets the TV to your personal preferences set in the Sound menu
68. to 52 inch TVs Before you wall mount the TV determine the correct length of the screw You can determine the length of the screw by adding the thickness of your wall mount to the screw length shown in the graphic min 15 mm max 18 mm Placement Before positioning the TV read all safety precautions See Get Started gt Important gt Safety Page 8 Position the TV where light does not shine directly on the screen The ideal distance to watch TV from is hree times its diagonal screen size For example if the diagonal screen size of he TV is 116cm 46 the ideal viewing distance is 3 5m 138 from the front of the screen While seated your eyes should be level with the center of the screen For best Ambilight effect position the TV 25 cm away from the wall EN 11 English Product highlights Full HD LCD display This TV is equipped with a full High Definition HD LCD display supporting the maximum HD resolution of 1920x1080p This display offers a brilliant flicker free progressive scan picture with optimum brightness and superb colours The LED backlight of the display offers exceptional picture contrast with exceptional energy saving Ambilight Ambilight is the lighting technology that emanates from the back of the television onto the wall This innovative technology automatically adjusts the colour and brightness of the light to match the TV picture This creates an unprec
69. tup Setup in the home menu allows you to change most of the TV settings including e Picture or sound settings e Installation or update of TV channels e Update of TV software e Other special features 1 In the home menu select Setup then press OK 2 Select an item with the Navigation buttons then press OK e _ Quick picture and sound settings Guides you through picture and sound settings e TV settings Advanced picture and sound settings EN 16 e Search for channels Guides you through channel installation e Channel settings Advanced channel settings e Connect to network Guides you through the connection to your PC network e Network settings Advanced network settings e Update software Guides you through an update of the TV software e Software settings Advanced TV update settings e Watch demos Demos of special features available with the TV Options Option menus offer convenient settings related to what is on screen 1 Press B to see what options are available 2 To exit press B again Watch TV Switch on off or to standby To switch on e If the front LED indicator is off press the power switch 1 on the bottom of the TV to the position e If the front LED indicator is red press amp on the remote control 2 Alternatively switch on the TV from standby by pressing any key on the side of the TV Notes e The front LED
70. w EN o NN amp 23 23 23 28 23 23 26 16 33 13 13 33 33 20 16 16 16 17 16 52 61 English multimedia play files mute TV speakers N Net TV browse Net TV clear history O options menu P pc network settings pc network media server pc network wired picture format picture settings position TV power R recycle register product remote control batteries remote control on screen remote control overview rename channels S safety Scenea enable Scenea lounge light Scenea upload picture screen care settings assistant settings picture settings sound shop mode EN 62 24 18 21 22 17 31 31 29 18 27 12 52 10 15 15 14 28 25 20 25 10 27 27 28 33 sleeptimer smart picture smart sound software digital update software Internet update software version sound settings specifications standby T technical specifications U universal access enable V visually impaired volume adjust volume mute W websites 24 18 18 35 35 35 28 52 17 52 25 26 18 18 21 2009 Koninklijke Philips Electronics NV All rights reserved Document order number 313913704054
71. ynamic levels Available only if Ambilight Colour is set to Dynamic e Brightness Adjusts the brightness of Ambilight e _ Colour Selects a predefined color e Custom colour Set your own Ambilight colour To access this option set Ambilight gt Colour gt Custom e Separation Adjusts the difference in color levels between each side of the TV Turn off this feature for a dynamic and uniform Ambilight color EN 19 English e TV switch off Selects how Ambilight switches off when the TV is switched off e Lounge light mood Selects a lounge light mode This setting is applied when lounge light is enabled in standby mode e _ Scenea lounge light Switch on or off Scenea lounge light when Scenea is enabled e Wall colour Selects a color to match the wall color Ambilight will correct its colours to mix best with the colour of the wall behind the TV Set Ambilight response Before you can adjust the speed of Ambilight response press ff gt Setup gt TV settings gt Ambilight gt Colour gt Dynamic Set the speed which Ambilight responds to on screen images 1 Press Il Experience 2 Select Ambilight dynamic then press OK 3 Move the slider to set Ambilight responsiveness 4 Press D to exit the slider 5 Press OK to confirm your choice Use lounge light When the TV is on standby you can switch on Ambilight and create a lounge light eff

Download Pdf Manuals

Related Search

Related Contents

Dataflex 32.745 air filter  4 - Moteurs Perkins  ステンレスミニボトル MMQ-A型  hl-2-1300p_2007-12(7) [igg ief].qxp  Bedienungsanleitung    descargar ficha técnica  Wiley SOA Modeling Patterns for Service Oriented Discovery and Analysis  Operator`s Manual  VFD User Manual - The Echelmeier Company  

Copyright © All rights reserved. Failed to retrieve file