Avanti WID260P Water Dispenser User Manual
Contents
1. INSTRUCTION MANUAL Model Number WID260P Water Dispenser with Ice Maker BEFORE USE PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS Avanti has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice Avanti Products P O Box 520604 Miami Florida 33152 www avantiproducts com Table of Contents Help Us Help You 4 Parts and Features Control and Display Panel 5 Important Safety Instructions 6 Installation Instructions 6 Electrical Connection 6 Initial Product Set Up 7 Before using your Water Dispenser 7 Water Bottle Placement Replacement 8 Operating Your Water Dispenser 8 Control and Display Panel 8 Hot Water Operation 9 Child Safety Guard on the Hot Water Faucet 9 Cold Water Operation 10 Ice Maker Operation 11 Care and Maintenance 12 Taking the Dispenser Out of Service 12 Troubleshooting Guide 12 Service for Your Water Dispenser 13 Wiring Diagram 13 Your Avanti Products Warranty 14 Registration Information and Registration Card 15 HELP US HELP YOU Read this guide carefully It is intended to help you operate and maintain your new water dispenser properly Keep it handy to answer your questions If you don t understand something or you need more assistance please call Avanti Customer Service 800 220 5570 Keep proof of origin2. product that is either new or factory refurbished In rental or commercial use the warranty period is 90 days LIMITED SECOND THROUGH FIFTH YEAR WARRANTY For the second through the fifth year from date of original purchase Avanti Products will provide a replacement compressor free of charge due to a failure You are responsible for the service labor and freight charges In rental or commercial use the limited compressor warranty is one year and nine months Cost to move the appliance to the servicers shop and back to the users home as may be required are the users responsibility WHAT IS NOT COVERED e Incidental or consequential damages e Parts and labor costs for the following will not be considered as warranty e Light bulbs and or plastic housing e Plastic cabinet liners e Punctured evaporator that voids the warranty on the complete sealed system e Replacement of house fuses or resetting circuit breakers e Shipping and handling costs associated with the replacement of the unit 14 e Repairs performed by unauthorized servicers e Surcharges including but not limited to any after hour weekend or holiday service calls tolls ferry trip charges or mileage expense for service calls to remote areas including the State of Alaska e Service calls that do not involve defects in material or workmanship such as customer education or improper installation e Service calls that are related to exter
3. Maker Compartment Door 6 Ice Maker Compartment 14 Ice Maker Mechanism 7 Water Inlet 15 Ice Water Separator 8 Top 16 Ice Bin Control and Display Panel 3 8 7 6 Power Indicator Light Green Alert Indicator Light Red Hot Water Indicator Light Red Ice Maker ON OFF Button Cold Water Indicator Light Blue Cold Water ON OFF Button BJO P Ice Maker Indicator Light Blue oNN Hot Water ON OFF Button Important Safety Instructions To reduce the risk of fire electrical shock MN WARNING Y or injury when using your appliance follow these basic precautions Read all instructions before using the water dispenser Never clean parts with flammable fluids The fumes can create a fire hazard or explosion Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other water dispenser The fumes can create a fire hazard or explosion Save these instructions INSTALLATION GUIDELINES e Remove the exterior and interior packing e Place your appliance on a floor that is strong enough to support the dispenser when it is fully loaded The unit is provided with four plastic feet if it does not sit level on the floor adjust the front feet to level the unit well to the floor e Locate the appliance away from direct sunlight and sources of heat stove heater radiator etc Direct sunlight may affect the acrylic coat
4. first cycle In order to do that wait for the hot water to reach temperature in approximately 10 minutes and then wait for the cold to reach temperature another 40 minutes approximately e Unplug the dispenser from the electrical outlet Proceed to drain the water from the faucets one at a time until no more water remains Note To facilitate this operation use a large container e Then drain any water left in the tanks by opening the drain plug located on the back until it drains completely e Proceed to close the drain cap e Remove the cap from the 3 or 5 gallon bottle and use a clean cloth to wipe off the neck of the bottle e Place the 3 or 5 gallon bottle of water on the water intake allow water to stand for approximately one minute e Push water faucet buttons to insure water flows from each of the faucets e Plug dispenser back into the electrical outlet e Now you are ready to use your water dispenser NOTE Your water dispenser has been cleaned and sanitized before leaving the factory but in case a taste problem develops place two tablespoons of baking soda and add tap water Fill water tank again and repeat basic operations previously outlined except turn hot water function OFF to avoid leaving residues in hot water tank ATTENTION If you do not plan to use the water heating function for more than three days we recommend that you turn off the hot water function WATER BOTTLE PLACEMENT REPLACEMENT Wh
5. Is This Product Used In The Price Home Business Product Features How Did You Learn About This Product LlAvanti Reputation Advertising Product Quality In Store Demo Personal Demo Salesperson Recommendation Other LFriend Relative Recommendation Comments Warranty Other 15 16 PRINTED IN CHINA
6. able Part Orders You may order parts and accessories that will be 800 220 5570 delivered directly to your home by personal check money order Master Card or Visa In Home Repair Service An Avanti Products authorized service center will 800 220 5570 provide expert repair service scheduled at a time that is convenient for you Our trained servicers know your appliance inside and out WIRING DIAGRAM AUTO SNAP THERMOSTAT r r FAN MOTOR COMPRESSOR N Pe AN FOR CONDENSER HAND RESET THERMOSTAT STEPPING MOTOR FOR ICE SHOVEL MICROSWITCH FOR DETECTING THE POSITION OF THE ICE MAKING BOX ICE MAKING T1 Hot water temperature sensor T2 Condensor sensor for controlling fan motor T3 Cold water temperature sensor 13 YOUR Avanti Products WARRANTY Staple your sales receipt here Proof of original purchase date is needed to obtain service under warranty WHAT IS COVERED LIMITED ONE YEAR WARRANTY For one year from the date of purchase by the original owner Avanti Products will at its option repair or replace any part of the appliance which proves to be defective in material or workmanship under normal use During this period Avanti Products will provide all parts and labor necessary to correct such defects free of charge so long as the appliance has been installed and operated in accordance with the written instructions in this manual Avanti Products will provide you with a reasonably similar replacement
7. al purchase date such as your sales slip with this guide to establish the warranty period Write down the model and serial numbers You ll find them on a label located on the back side of the unit Please write these numbers here Date of Purchase Model Number Serial Number Use these numbers in any correspondence or service calls concerning your water dispenser If you received a damaged water dispenser immediately contact the dealer or builder that sold you the water dispenser Save time and money Before you call for service check the Trouble Shooting Guide It lists causes of minor operating problems that you can correct yourself IF YOU NEED SERVICE We re proud of our service and want you to be pleased If for some reason you are not happy with the service you receive here are some steps to follow for further assistance FIRST contact the people who serviced your appliance Explain why you are not pleased In most cases this will solve the problem NEXT if you are still not pleased write all the details including your telephone number and send it to Customer Service Avanti Products 10880 NW 30 Sireet Miami FL 33172 PARTS AND FEATURES 1 Control Panel 9 Handle 2 Hot Water Faucet with 10 Power Cord Child Safety Lock 3 Room Temperature Faucet 11 Hot Water Drain with Cap 4 Cold Water Faucet 12 Ice Maker Drain with Cap 5 Water Drip Tray 13 Ice
8. as desired gt Hot Water Operation dica Hot Water Indicator Alart indicator Hot Water Button e Press the hot water button see figure above e The RED hot water indicator above the button will start blinking this means the heating element has started to work e When the RED indicator light reached a solid glow it means the hot water has reached the desired temperature CAUTION If there is no hot water left the first time around or if you have drained all of the water out etc the ALERT beep will sound 10 times and the RED ALERT indicator will be lit Replace the water bottle and proceed with the hot water function operation If you do not want hot water press the hot water button see figure above one more The RED hot water indicator will be off NOTE THE HOT WATER FAUCET HAS A CHILD SAFETY GUARD ATTACHMENT To get hot water Rotate the Child Safety Lock counter clockwise then push the Hot water faucet inward to dispense Safety button will return to its original position when faucet is released gt Cold Water Operation Cold Water Indicator Power Indicator Alert Indicator Cold Water Button e Press the cold water button see figure above to turn ON the cooling cycle e When the cooling system is ON the BLUE cold water indicator light above the button see figure above will start blinking which indicates the cooling cycle is operating e When this indicator reaches a solid glow i
9. en a new bottle is installed you must open the hot water faucet and remove no less than 4 full cups of water to insure the water flows properly and the water reservoir is at the proper level Steps To Replace Water Bottles e Remove cap e Use a clean cloth to wipe off neck of bottle e Carefully lift bottle approx 40 Ibs using your legs and not your back Do not place hands on opening of bottle while placing in reservoir e Insert the water bottle on the water intake over reservoir opening so it settles properly on it e Wipe off any water which may have splashed on dispenser top e When a new bottle is installed you must open the hot water faucet and remove no less than 4 full cups of water to insure the water flows properly and the water reservoir is at the proper level OPERATING YOUR WATER DISPENSER Control and Display Panel 2 3 4 7 6 1 Power Indicator Light Green 5 Alert Indicator Light Red 2 Hot Water Indicator Light Red 6_ Ice Maker ON OFF Button 3 Cold Water Indicator Light Blue 7 Cold Water ON OFF Button 4 Ice Maker Indicator Light Blue 8 Hot Water ON OFF Button After plugging the unit into the main power outlet the POWER indicator light Green on the control panel will light up Prior to operation of the unit please be sure to fill with water and make sure the water settles inside the water tank and then press the Hot Cold and or Ice ON OFF buttons
10. he set temperature first then the unit will switch to ice making operation automatically If the cold water temperature goes up again or you drink the cold water from the cold water faucet the unit will switch to cold water operation again after the present ice making cycle has finished 11 CARE AND MAINTENANCE e Wash the inside of the reservoir with a warm water and baking soda solution The solution should be about 2 tablespoons of baking soda to a quart of water Turn off the hot water function e The drip tray and water faucets should be cleaned with mild detergent and warm water e At regular intervals or once a month inspect the coils located across the back of the dispenser Vacuum accumulation of dust or clean it with a hard brush TAKING DISPENSER OUT OF SERVICE e Ifthe water dispenser will not be used for a long period of time unplug the power cord from the wall outlet e Turn off the hot water e Drain the water through the faucets e Drain the water from the tanks by removing the plug from the back of the dispenser WARNING THE WATER COMING OUT OF THE BACK MAY BE SCOLDING HOT e Unit should NOT be transported on its side Place it upright if possible and cover it with a blanket PROBLEMS WITH YOUR WATER DISPENSER You can solve many common water dispenser problems easily saving you the cost of a possible service call Try the suggestions outlined below to see if you can solve the problem before calling the service
11. ing and heat sources may increase electrical consumption Extreme cold ambient temperatures may also cause the appliance not to perform properly e Allow 2 inches of space between the water dispenser and the wall which allows for proper air circulation to cool the compressor e Plug the appliance into an exclusive properly installed grounded wall outlet Do not cut or remove the third ground prong from the power cord under any circumstances Any questions concerning power and or grounding should be directed toward a certified electrician or an authorized Avanti Products service center e This water dispenser is not recommended for outdoor use e Do not locate the dispenser in area where the temperature may fall below freezing 32 F e Keep area around dispenser free of dust and dirt e Keep the reserve supply of water bottles away from excessive heat and light e Never unplug the water cooler except for maintenance Electrical Connection This appliance should be properly grounded for your safety The power cord of this appliance is equipped with a three prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock Plug the appliance into an exclusive properly installed grounded wall outlet Do not under any circumstances cut or remove the third ground prong from the power cord Any questions concerning power and or grounding should be directed toward a certified electrician or an author
12. ized Avanti Products service center This appliance requires a standard 115 120 volt 60Hz electrical outlet with three prong ground The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental injury Do not use an adapter plug with this appliance Do not use an extension cord with this appliance If the power cord is too short have a qualified electrician or service technician install an outlet near the appliance MN WARNING NW IMPROPER USE OF THE GROUNDED PLUG CAN RESULT IN THE RISK OF ELECTRICAL SHOCK IF THE POWER CORD IS DAMAGED HAVE IT REPLACED BY AN AUTHORIZED AVANTI PRODUCTS SERVICE CENTER INITIAL PRODUCT SET UP Before Using Your Water Dispenser e Check to be sure the following parts are included Instruction manual Plastic Ice Scoop e Before connecting the appliance to the power source let it stand upright for approximately 2 hours This will reduce the possibility of a malfunction in the cooling system from handling during transportation e The water dispenser is pre cleaned at the factory but the reservoir and water lines must be flushed with fresh water before use as follows e Keep the unit unplugged e Fill water tank with tap water full to capacity Wait for 5 minutes until water settles e Turn the child safety button then push the hot water faucet until water comes out then stop e Plug the dispenser into the electrical outlet We are ready to complete the
13. nal problems such as abuse misuse inadequate electrical power accidents fire floods or acts of God e Failure of the product if it is used for other than its intended purpose e This warranty does not apply outside the continental U S A Registration Information Thank you for purchasing this fine Avanti product Please fill out this card and return it within 100 days of purchase and receive these important benefits gt Protect your product We will keep the model number and date of purchase of your new Avanti product on file to help you refer to this information in the event of an insurance claim such as fire or theft gt Promote better products We value your input Your responses will help us develop products designed to best meet your future needs Avanti Registration Card Name Model Serial Address Date Purchased Store Dealer Name City State Zip Occupation As Your Primary Residence Do You Area Code Phone Number Own Rent Did You Purchase An Additional Warranty Your Age Extended None under 18 118 25 126 30 Reason For Choosing This Avanti Product 131 35 36 50 Lover 50 Please indicate the most important factors Marital Status that influenced your decision to purchase Married OSingle this product
14. r TROUBLESHOOTING GUIDE The circuit breaker tripped or a blown fuse Check to be sure the cold switch on the back is ON The water dispenser does not have the correct clearances Compressor turns on and off frequently The room temperature is hotter than normal The temperature control is not set correctly The water dispenser does not have the correct clearances Vibrations The water dispenser seems to make too much The rattling noise may come from the flow of the noise refrigerant which is normal As each cycle ends you may hear gurgling sounds caused by the flow of refrigerant in your water dispenser Contraction and expansion of the inside walls may cause popping and crackling noises The water dispenser is not level air is released into the bottle Water is boiling in the hot tank and bubbling up into the bottle Press the hot dispenser button until water flows to remove air from the hot tank 12 SERVICE FOR YOUR WATER DISPENSER We are proud of our customer service organization and the network of professional service technicians that provide service on your Avanti appliances With the purchase of your Avanti appliance you can be confident that if you ever need additional information or assistance the Avanti Products Customer Service Team will be here for you Just call us toll free AVANTI PRODUCTS CUSTOMER SERVICES Product Information Whatever your questions are about our products 800 323 5029 help is avail
15. t means the cold water has reached the desired temperature e The cooling system will continue cycling ON and OFF to maintain the water in the tank at the appropriate temperature 10 gt Ice Maker Operation Ice maker Indicator Power Indicator Alert Indicator Ice maker Button e Press the ice maker button see figure above to begin the ice making cycle e When the cooling system is on the BLUE ice indicator light above the button see figure above will start blinking which indicated the ice making cycle is operating e The ice maker will produce ice every 7 to 15 minutes depending on the ambient temperature of the room e While the ice making process is ON the unit will periodically verify the water level e If there is not enough water to make ice the ice maker will stop automatically and the RED ALERT indicator see figure above will glow e Once the ice maker detects the ice compartment is full the ice indicator light see figure above will automatically change from blinking to constantly lit e To remove the ice open the ice maker door and using the ice scoop included remove the amount of ice as desired e For the most efficient operation of the ice making process turn the hot water button see figure above temporarily OFF until needed NOTE When you turn on the cold water and ice making operations at the same time you should wait several minutes to let the water temperature in the cold tank go down to t
Download Pdf Manuals
Related Search