AOC A20S431 Flat Panel Television User Manual
Contents
1. Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with a dry cloth Do not block any of the ventilation openings Install in accordance with the manufacturers instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and third grounding prong The wide blade or third prong is provided for your safety When the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over eae ee 13 The TV should be operated only from the type of power source indicated on the label If you are not sure of the type of power supplied to your home consult your dealer or local power company 14 U2. S Video x 1 20 Speaker built in Two 2 watt speakers Headphone Mini jack for stereo 3 5 ana English French Spanish Portuguese anguage ensi able Stand Included Wall Mount VESA 100 x 100 mm Power Supply AC100V 240V 50 60Hz Power paar fopa Banaras PEE Environment sorge 25 C 60 C pimenson x H x D with stand 498 x 489 x 256 mm Weight net Kg w o Accessories Aeeeccoics Remote Controller Batteries AAAx2 AC Power Cord aaa User s Manual Audio Cable 21 Before Calling Service Please make these simple checks before calling service These tips may save you time and money since charges for receiver installation and adjustments of customer controls are not covered under your warranty Symptoms Items to Check and Actions to follow Ghost or double This may be caused by obstruction to the image antenna due to high rise buildings or hills Using a highly directional antenna may inprove the picture No power Check that the TV s AC power cord is plugged into the mains socket Unplug the TV wait for 60 seconds Then re insert plug into the mains socket and turn on the TV again No picture Check antenna connections at the rear of the TV to see if it is properly connected to the TV possible broadcast station trouble Try another channel Adjust the contrast and brightness settings Check the V Chip control Some V Chip modes could block the screen
3. Mute is ON there are no sound output OSD Setup Set OSD language Adjust the horizontal position of the OSD Adjust the vertical position of the OSD Adjust the OSD time out OSD Background Adjustment PEART 10 TV Setup Air Cable CATV Auto Scan Add Erase Add Current Program 2 Sleep Timer Disabled Closed Caption OFF V CHIP R eset To Default AIR CATV for different TV input solution RF and cable Auto searching is used for searching all TV program channels After finishing search and exiting the machine will save the program automatically you can also press menu to break the searching but only the searched programs are saved when the machine exits searching 3 Add Erase is for add or delete the current channel for memorizes Current Program is display the current channel number 5 Sleep Timer lt is for set a time period after which the TV should switch itself to standby The counter runs from Disabled 30 gt 60 gt 90 gt 120 minutes The setting will be removed when using reset 6 CLOSED CAPTION It s allows you to read the dialogue of television programs on the TV screen Designed to help the hearing impaired this feature uses on screen text boxes to show dialogue and conversations wile the TV program is in progress Captions will appear on the screen only during captioned broadcasts Remark the captions do not always use correct spelling and grammar
4. Good picture but no Increase the VOLUME sound Check that the TV is not muted press the button on the remote control Good sound but poor Adjust the contrast color and brightness color settings Adjust TV Mode AlIR or CATV HRC IRC check that is ok or not Poor picture Sometimes poor picture quality occurs when having activated an S VHS camera or camcorder connected and having connected another peripheral at the same time In this case switch off one of the other peripherals Snowy picture and noise Check the antenna connection Horizontal dotted line This may be caused by electrical interference e g hairdryer nearby neon lights etc Turn off the equipment Television not Check whether the batteries are working responding to remote Replace if necessary control Clean the remote control sensor lens on the TV You can still use the buttons at the front of your TV Select the TV mode to be sure your remote control is in the TV mode 22 GLOSSARY Audio Video Inputs Located on the rear and the front of the receiver these connectors RCA phono type plug are used for the input of audio and video signals Designed for use with VCRs or other accessories in order to receive higher picture resolution and offer sound connection options S Video Input Allows direct connection of high resolution video sources such as a Super VHS videocassette recorder Laser Disc player etc Provi
5. Moc EYE GG VALUE User s Manual LEDTE A205431 USER S MANUAL TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCT IONS messas 3 PREPARATION decteqressepceueseeterts asesuetssaceantessetsetessatacreaneeceteaauee 4 OPERATING INSTRUCTIONS 20 nn 2 nn nn nnn nnnnnnee 6 SOU TG remoie Ol tO eae arse ec cee 6 TOUSE ihe MENUS e926 sees seste ter ase case eee reset aesateerenteceseee 7 Maini MENU ni neta Senseo eee nea soe aeaatenacsedeseneee 7 CONNECT PERIPHERAL EQUIPMENT 14 Front Panel Control Knobs 7 sr rmzmis anunii innne 14 PROD al alll Of S2sessasetsecec esses a esses eeoeetesee seen seeaseeseane essere sees 15 WIGEO TECORGGE sates scene Seas re seen ee eect 16 DVD DIAGF measer eia scene eee eee Seen ie 17 Camera camcorder Video Game Set 17 PIC AG PNONG ssirenei e 17 TIPS 18 PRODUCT SPECIFICATION 19 BEFORE CALLING SERVICE 21 GOSSA se iE 22 Thank you very much for choosing the LCD TV We recommend that you take a few minutes to read carefully through this manual before installing and switching on the TV Please keep this manual in a safe place for your future reference IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment
6. N iN Not all TV programs and product commercials are made for broadcast with Closed Caption information included Refer to your area s TV program listings for the TV channels and times of closed Caption shows The captioned programs are usually noted in the TV listings with service Marks such as CC Caption Mode CC1 CC4 Dialogue and descriptions for the action on the captioned TV program shows on screen 11 Text Mode TT1 TT4 Often used for channel guide schedules bulletin board information for Closed Caption programs news weather information or stock marker reports Not all Closed Caption modes are necessarily being use by a TV channel during the transmission of a Closed Caption program V CHIP Setup Select V Chip on OSD then enter 4 digits of pin number Initial pin number is 0000 If you enter an incorrect pin number Error message will be displayed Enter PIN It is the parental control function V chip It is used to block program viewing based on the ratings by the broadcaster The default setting is to allow all programs to be viewed Viewing can be blocked by the type of program and by the categories chosen be blocked It is also possible to block all program viewing for a time period A There are two item could be defined One is TV Guidelines another one is Movie Guidelines B Setting up TV Guidelines Use Up Down arrow buttons to move around the matrix and press Right arrow bu
7. ction select AV If you use connection Select s video Insert videotape in the VCR and press the PLAY button oe 17 DVD PLAYER Connect the video output port of DVD player to the video input port of TV Connect the left and right audio of DVD to the left and right channels of audio input of TV If your DVD player is equipped with S VHS video port For better quality picture please connect the S video cable to the S video input port of TV Connecting the audio output ports through audio cable is a must since S video input port is not attached with audio How to play If you use connection please select video AV input If you use connection please select S VIDEO input CAMERA CAMCORDER VIDEO GAME SET DIGITAL CAMERA How to connect 1 Connect your digital camera camcorder videogame set to VIDEO port AUDIO R AUDIO L for mono equipment 3 S VHS quality with an S VHS camcorder is obtained by connecting the S VHS cable with the S VIDEO input and AUDIO input How to use 1 Select AV or S VIDEO 2 Turn on the external AV equipment HEADPHONE 1 Insert the plug into the headphone port 42 when insert headphone will block speaker audio output 2 Press the i key on the remote control to switch off the sound from the headphone and the internal loudspeakers of the TV 3 Press the cursor lift right to adjust the volume 18 Care of the screen Do not rub or strike the sc
8. d channel Key Press to confirm your function selection and adjustment Source Key Press to select your input source There is a wide range of video and audio equipment that can be connected to your TV The following connection diagrams show you how to connect them 15 PREPARATION Remove the back plate at the back of the TV as shown on the illustration opposite Lay the LCD TV with the screen down on a table as it will be easier to connect your peripheral equipment Please take precaution not to damage the screen 1 RF TV port 2 2 Earphone output port 3 3 Right audio input port 4 4 Left audio input port 6 5 AV video port 6 S VIDEO video port 7 7 power input port 16 VIDEO RECORDER How to connect 1 Connect the supplied antenna cable to the RF IN port of your VCR 2 Connect another RF cable from the output RF of your VCR to the Antenna input of your TV Better quality when playing from your VCR can be obtained if you also connect the Video Audio LEFT AND right only for stereo equipment cables to the VIDEO AUDIO L and R inputs AV If your VCR has an S VHS video jack For improved picture quality connect a S Video cable with the S VIDEO input on the TV instead of connecting the VCR to the VIDEO port S Video does not provide audio audio cables must still be connected to provide sound Watching VCR If you use connection select the TV channel search If you use conne
9. des improved picture resolution sharpness and clarity Audio output Provide sound output it can be connected external speaker and enhance the sound quality Menu An on screen listing of feature controls shown on the TV screen that are made available for user adjustments Multichannel Television sound MTS The broadcasting standard that allows for stereo sound to be transmitted with the TV picture RF Radio Frequency or modulated signal design used as the carrier for television broadcasts Second Audio Program SAP Another or additional audio channel provided for in the Multichannel Television Sound MTS broadcast standard A monaural soundtrack included within the recorded or video signal usually containing a second language translation for the displayed program Sleep Timer Function with which you can set a time period after which the TV should turn itself off 23
10. lashing 2 Insert the aerial plug firmly into the aerial socket at the back of the TV 3 Remote control Remove the cover of the battery compartment Insert the 2 batteries supplied Type AAA 1 5V 4 Power Insert the power cord in the wall socket having an AC power supply 5 Turn the TV on Turn the main power switch on the right side of TV to ON Press the secondary power button in front of the TV to turn it on If the main power switch is OFF the front LED light will also be OFF If the main power is ON the LED will be blue if the power is ON amp orange if the power is in standby mode OPERATING INSTRUCTIONS USE OF THE REMOTE CONTROL POWER Press to turn on off the TV The TV is never completely powered off unless it is physically unplugged 0 9 100 Digit buttons To select a TV channel CH Press or v or Y to browse through the TV channels which are not erased To view a blocked channel use the digital buttons to access the channel and enter your access code VOL Press or to adjust the volume PC No Supported SLEEP With this key you can set a time period after which the TV should switch itself to standby Press the key repeatedly to select the number of minutes The counter runs from 30 60 90 120 minutes PIP Not Supported POP Not Supported MENU Press repeatedly to display OSD menu V CHIP Press this button to setup parental control SWAP Not Supp
11. nplug this apparatus during lightning storms or when unused for long periods of time 15 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 16 17 18 19 20 21 This product may contain lead or mercury Disposal of these materials may be regulated due to environmental considerations For disposal or recycling information please contact your local authorities or the Electronic Industries Alliance www eiae org Damage Requiring Service The appliance should be serviced by qualified service personnel when A The power supply cord or the plug has been damaged or B Objects have fallen or liquid has been spilled into the appliance or C The appliance has been exposed to rain or D The appliance does not appear to operate normally or exhibits a marked change in performance or E The appliance has been dropped or the enclosure damaged Tilt Stability All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinets design Do not compromise these design standards by applying excessive pull force to the front or top of the cabinet which could ultimately overturn
12. orted SIZE Not Supported MUTE Temporarily interrupt the sound or restore it DISPLAY Press this button to Display Channel number on the right top corner MTS SAP Press this key to activate Multichannel Television Sound Stereo or Mono sound PRE CH To display the previously selected TV channel TV VIDEO Select your input source press repeatedly to select TV AV S VIDEO CAPTION Press this button to turn Closed Caption on Be sure you have selected Caption On in the Setup menu TO USE THE MENUS 1 Press the MENU button to display each menu 2 Use the cursor up down to select a menu item 3 Use the cursor left right to enter a submenu or enable disable the function 4 Press the MENU button to exit the menu Press the MENU buiton into the main OSD On Screen Display Adjust item include SOUND SETUP gt OSD SETUP gt TV SETUP and PICTURE SETUP SOUND Setup sound Setup Volume Bass LOO Treble Balance j amp 7 7 7 amp 3z 7 Mute OFF Reset To Default l Volume is adjusted from 0 to 100 2 Bass and Treble are adjusted from 0 to 100 You can adjust picture Volume Bass and Treble to the levels you prefer 3 The adjustment range of balance is from O to 100 O to 50 is used to adjust the volume of right speaker from low to loud 50 to 100 is used to adjust the volume of left soeaker from loud to low 4 The Mute is ON or OFF and if the
13. reen with anything hard as this may scratch mar or damage the screen permanently Unplug the screen before cleaning the screen Dust the TV by wiping the screen and the cabinet with a soft clean cloth If the screen requires additional cleaning use a clean damp cloth Do not use liquid cleaners or aerosol cleaners Mobile telephone warning To avoid disturbances in picture and sound malfunctioning of your TV or even damage to the TV keep away your mobile telephone from the TV End of life directives We are paying a lot of attention to produce environmentally friendly in green focal areas Your new receiver contains materials which can be recycled and reused At the end of its life specialized companies can dismantle the discarded receiver to concentrate the reusable materials and to minimize the amount of materials to be disposed of Please ensure you dispose of your old receiver according to local regulations 19 Product Specification Feature 20 screen Specification Aspect Ratio Display Area opening 40 LCD Panel Hx V 8mmx306mm Pixel Pitch 0 2125mm x 0 6375mm Display colors 16 7 million Lamp Type Life 60000 hr Color Temperature Cool Warm V Standard NTSC M TV Function T Sound systems MTS SAP Colour systems NTSC DPF function Supported by memory Optional card Nobsupponed MKEIeS FM transmission earphone Not supported Optional MEQUENGY RCA x 1 Video Inputs AV S VIDEO Audio L R x 1 Share
14. the power plug to the wall outlet socket after connecting the TV to the adapter 22 Objects and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings i DANGEROUS VOLTAGE The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the produc s enclosure that may be of SA 1965 sufficient magnitude to constitute a risk of electrical shock to persons INSTRUCTIONS The exclamation point within an equilateral triangle is to alert the User to the presence of important operating and maintenance servicing instruction in SA 1966 the literature accompanying the appliance Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids Such as vases Shall be placed on the apparatus Caution Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type PREPARATION 1 Place the TV on a solid surface Sh 302 SS i NS Ensure that the TV is placed in a position to allow free flow of air Do not cover the ventilation openings on the back cover To prevent any unsafe situations no naked flame sources such as lighted candles should be placed on or in the vicinity Avoid heat direct sunlight and exposure to rain or water The equipment shall not be exposed to dripping or sp
15. the product Also do not endanger yourself or children by placing electronic equipment toys on the top of the cabinet Such items could unsuspectingly fall from the top of the set and cause product damage and or personal injury Wall or Ceiling Mounting The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer Power Lines An outdoor antenna should be located away from power lines Outdoor Antenna Grounding If an outside antenna is connected to the receiver be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges Section 810 of the National Electric Cord ANSI NFPA No 70 1984 provides information with respect to proper grounding of the mats and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding connectors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode See Figure below EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE Note to the CATV system installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical Please make sure to connect
16. tton to change the value form U to B or B to U U Unblock B Block 12 TV Guidelines ALL FV V S L D TV_Y TV_Y7 U U TV_G U TV_PG U U UU U TV_14 U U UU U TV_MA U UUU C Setting up Movie Guidelines Use Up Down arrow buttons to move around the matrix and press Right arrow button to change the value from U to B or B to U Movie m T TE G PG PG 13 R NC_17 X NR 13 D CHANGE PIN Personal Identification Number is for change password to control the V chip setup it s included three steps ENTER PIN to enable this function then ENTER NEW PIN to change a new one After that COMFIRM NEW PIN Picture Setup Picture Setup Brightness SC Contrast Co o Hue CO E Saturation Sharpness Color Tone Black Level MMMMEEE Reset To Default ook 4 Contrast Brightness and Saturation are adjusted from 0 to 100 2 gt Hue is adjusted from 0 to 100 3 Sharpness is adjusted from 0 to100 Hue is only adjusted in NTSC telecast system You can adjust contrast brightness saturation hue black level and sharpness to the levels you prefer 4 Color Tone is for AV S VIDEO and TV color you can select warm or cool 14 CONNECT PERIPHERAL EQUIPMENT FRONT PANEL CONTROL KNOBS Power Key Press to turn on or off the TV MENU Key Press to show the OSD menu and exit OSD menu at the TV Down Up Key Press to perform select function an
Download Pdf Manuals
Related Search