Uniden BC-RH96 Specifications
Contents
1. 24 Serial Operation Precautions The BCT15 and the BCD996T have a 9 pin serial connection in the back designed for use with serial operations in addition to the special serial jack on the front Other than connecting a GPS the front and the back cannot be used or connected at the same time when the BC RH96 is in use For example if you connect a 9 pin serial cable to your PC to use the UASD programming software disconnect the BC RH96 front cable first Initialize Memory Reset To reset the BC RH96 to factory default settings follow the sequence below Note that once done there is no undo and all programmed keys are reset With the unit off press and hold the following keys and turn on power at the same time 2 9 and HOLD You see the reset screen below If you turn off power during reset the process starts again when you next turn on the unit Rll Memora Clear Please Wait 25 Using the Cable Clamp A self adhesive clamp guide is provided to assist you to safely route the Remote Cable to your target scanner Clean the planned location peel the base covering and firmly press it on the scanner Then route the Remote Cable through the guide This helps assure that the remote Cable will not come out of the special connector on either a Mobile of Handy scanner Specification Size inches Weight Remote Head only Input Voltage Current Drain nominal Operating Temperature S2. 72Wx19Dx2 2H without knobs 0 7 pounds 13 8 Vdc 11 0 16 6 Vdc In standby 2 mA In use 106 mA backlight high 20 to 60 C 4 to 140 F 26 One Year Limited Warranty Important Evidence of original purchase is required for warranty service WARRANTOR UNIDEN AMERICA CORPORATION Uniden ELEMENTS OF WARRANTY Uniden warrants for one year to the original retail owner this Uniden Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below WARRANTY DURATION This warranty to the original user shall terminate and be of no further effect 12 months after the date of original retail sale The warranty is invalid if the Product is A damaged or not maintained as reasonable or necessary B modified altered or used as part of any conversion kits subassemblies or any configurations not sold by Uniden improperly installed D serviced or repaired by someone other than an authorized Uniden service center for a defect or malfunction covered by this warranty E used in any conjunction with equipment or parts or as part of any system not manufactured by Uniden or F installed or programmed by anyone other than as detailed by the owner s manual for this product STATEMENT OF REMEDY In the event that the product does not conform to this warranty at any time while this warranty is in effect warrantor will either at its option repair or re
3. 3 When you reach the desired level press the knob or e To step back to a previous menu press MENU E Yes again to make your selection 18 Setting Mobile Options The Default selection associates the F Keys on the 1 The screen shows Set Kes Assign Press Scroll to the desired Remote Head exactly the same as the corresponding F Scroll to highlight Mobile OFt ior then press Key on the target mobile scanner the rotary knob Mobile Default Key Assigment ORIGINAL Key Operation Y BCD996T POL DOT the rotary knob again Select Action key F1 Key F Default Kew Key or F3 Key and FtMenu Key press the rotary knob F L O Kew to select it F2 WX HP BT For each F Key you can select a function from the F3 GPS GPS Select Action menu screen 19 The Default Option table only applies to the BCT15 and BCD996T The following list applies to all four scanners mobile and handy type for F1 F2 or F3 F1 F2 F3 Key Function F Menu Key 0 0 eeeseeeeeeeeeeeeee FUNC MENU FFO Rey ra nae i A eR FUNC L O SCAN CY ac a sucen de cos csvescontedeudeesecedtoctpecsebsentersy Scan Hold Rey niite R Hold Service Menu Service Search Range Menu WX Scan Menu eee WX Operation Menu Goto Custom eee serere Custom Search Mode Goto CC Only seese Close Call Only Mode Goto Tone Out eee Tone Out Standby Mode 20 CC Band Menu Settings Menu 0 ee eee eeteeee
4. of your vehicle s body or other possible hazards Be sure the cable does not interfere with controls operation of the vehicle or passenger safety Insert the cable s special connector in the front port of the BCT15 BCD996T mobile scanner or the side port of the BR330T BCD396T handy scanner Data Port Cable Firmware Updates The Remote Head has a data port see BC RH96 Connections so you can update the firmware using the data transfer cable provided with your scanner Con 12 nect the data transfer cable to this port on the bottom of the Remote Head Connect the other end to the DB9 serial port on your PC This is the only purpose of this connection Important For best operation be sure your scanner always has the latest firmware Visit www uniden com to verify that your scanner has the most up to date firmware Control Configuration Guides The BC RH96 lets you remotely operate the following scanners e BCT15 Mobile Scanner e BCD996T Mobile Scanner e BR330T Handy Scanner e BCD396T Handy Scanner Even though the scanners have different controls and functions when you connect the BC RH96 to the scanner the Remote Head automatically changes the functionality of its controls to match the operation of the target scanner 13 Important If you have more than one scanner be sure to turn off power to the BC RH96 before switching target scanners To assist you to better understand each of these changes a set of
5. pocket sized Quick Reference Cards are provided The diagrams on the next pages replicate the card diagrams FUNC I BR330T ay ALERT VOL on LIGHT Fi F2 F3 The BR330T Key Configuration I BCD396T Oro O20 orr LIGHT Fl __sC amp F2Q __C amp FE The BCD396T Key Configuration F2 ___ ss F The BCT15 Key Configuration BCT15 15 BCD996T SRCH1 SRCH2 SRCH3 OROROORO SRCH4 SRCH5 SRCH6 ATT REV F1 F2 F3 The BCD996T Key Configuration Operation If you have not connected a target scanner you see the screen below If the BC RH96 remains on while you turn on the scanner this display is automatically replaced with the scanner s initial display Apply power to your target scanner and set its Baud Rate to the highest setting Make sure that the Remote Control cable is properly connected and rotate the VOL control clockwise past OFF until it clicks BC RH96 The LCD displays the following screens your version number may be different than the screen shown here Scanner Unconnected BC RH96 Uniden Bearcat BC RH96 Press MENU Key for Confid Version 1 66 08 16 When you turn the Remote Head off you see the screen to the right which reminds the remote head you that power is still does not turn applied to the target scanner off the Scanner Powering down Setting the BC RH96 Backlight To adjust the backlight brightness level on the Re
6. Adhesive Cable Clamp If any of the above items are missing or damaged immediately contact your place of purchase or Uniden Customer Service at 800 297 1023 Mounting the BC RH96 The following two mounting methods are suggestions used by most Depending upon your individual situation you may decide on a different approach Using the Mounting Bracket For most vehicles the supplied bracket will be the easiest method of mounting With the bracket removed from the Remote Head use the holes in the bracket as a template to initially mark the location you plan to use in your vehicle Be abso lutely certain of what might be behind the mounting surface before making any holes be it above or below or in front of your dash armrest console or other location If you drill carelessly expensive damage can result If in doubt consult your vehicle dealer s service department or a qualified professional installer Important AVOID AIRBAG DEPLOYMENT ZONES Ignoring this installation concern may result in bodily harm and the inability of the airbag to per form properly Be sure to select a mounting location so that when you route power and remote cables they do not interfere with any existing cables or other controls Check local laws to determine if using a scanner is legal in your area Bracke Knobs Using the supplied screws or other suitable hardware secure the bracket Insert the BC RH96 and insert the bracket k
7. Product Include evidence of original purchase and a note describing the defect that has caused you to return it The Product should be shipped freight prepaid by traceable means to warrantor at Uniden America Service 4700 Amon Carter Blvd Fort Worth TX 76155 Visit www uniden com to register your product 2007 Uniden America Corporation Fort Worth Texas Contains additional foreign articles Printed in China
8. Uniden wora Without UNIDEN ACCESSORIES t NE 10 30A 02 35 165M HOME 868 9375 MHz OWNER S MANUAL Table of Contents Introduction FCC Statement IC Statement Mounting the BC RH96 Using the Mounting Bracket Using Hook and Loop Material 9 BC RH96 Connections Connecting Cables Remote Head and Scanner Power Control Cable Data Port Cable Firmware Update 12 Control Configuration Guides 13 The BR330T Key Configuration 14 The BCD396T Key Configuration 14 The BCT15 Key Configuration 15 The BCD996T Key Configuration weld Operation Setting the BC RH96 Backlight Configuration Menu Mode Setting the BC RH96 LCD Contrast Setting Mobile Options Mobile Default Key Assigment Setting Handy Options Default Handy Option Key Assigment Setting the Function Mode Setting Hold Timer Setting Auto Release Miscellaneous Volume Settings For Handy Scanner Control Limitations Serial Operation Precautions Initialize Memory Reset Using the Cable Clamp Specifications ccccsseees One Year Limited Warranty 2007 Uniden America Corporation Fort Worth TX 76155 All Rights Reserved Introduction Your Bearcat BC RH96 Remote Head helps you get more out of your Uniden BCD396T BR330T BCT15 or BCD996T scanner The BC RH96 provides the following features e It controls all the functions of your Uniden mobile or ha
9. eorient or relocate the receiving antenna e Increase the separation between the equipment and the receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and this device must accept any interference received including interference that may cause undesired operation IC Statement This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme la norme NMB 003 du Canada Included with your BC RH96 Your Bearcat Remote Head is supplied with essential components and accessories to get you operational Supplied are e The BC RH96 Remote Head unit e A steel mounting bracket with attachment washers factory installed e Mounting hardware screws and washers to attach the bracket e Threaded knobs to allow mounting the Remote Head quickly to the bracket e Remote connection cable 10 feet in length e Acorrectly polarized vehicle DC adapter to let you connect the Remote Head to a convenience outlet in your vehicle that provides 12 13 8 VDC This Owner s Manual e A set of pocket sized Quick Reference Configuration cards for convenient setup and usage e A Self
10. eteees Brdcst Scrn Menu Search L O Menu aan Close Call Band Setting Menu Settings Menu Broadcast Screen Band Menu A EE E NEE Review L O List Details about each of the operations of the F keys listed above can be found in the respective Owner s Manual for the mobile or handy scanners Setting Handy Options The Default selection associates the F Keys on the 1 Scroll to the desired key F1 Key F2 Key or F3 Remote Head exactly the same as the corresponding Scroll to highlight Haridas OFt ion then press F Key on a Mobile scanner or a function on a Handy the rotary knob scanner The screen shows Seat Key Oss i OK Press Default Handy Option Key Assigment the rotary knob again ORIGINAL Key Operation BR330T_ BCD396T Key and press the rotary knob to select it F1 For each F Key select a function from the Select F2 CC Only Action menu screen E3 F Key column applies to the BC RH96 F keys 21 Setting the Function Mode If you scroll to the Handy Option menu you can highlight Set Func Mode Select this to choose between St Hold Timer and Set Auto Release Setting Hold Timer When you select this option you can scroll through and select from five settings The setting determines how long the knob acting as the FUNC control is enabled each time you press it if you do nothing else 22 The five settings are Off 3 sec 5 sec 10 sec Infinite Function mode is continu
11. he DC Power Cable and route it through the channel through the channel To Remote Cable Mini Plug Cable Routing Guides Data Port for firm ware updates 10 Connecting Cables There are three cables that you can connect to the BC RH96 e The DC power cable e The Remote Control cable e The Data Port cable not supplied with BC RH96 Remote Head and Scanner Power To provide power to the Remote Head insert the barrel of the cigarette lighter adapter into the jack in the back of the unit marked DC IN 13 8V Insert the other end in a convenient socket on the dash of your vehicle To connect a power lead permanently obtain a barrel connector 5 5 mm diameter with a center pin 2 mm diameter and wire it with the center positive using at least 18 gauge wire to an extra fuse block terminal of your vehicle The Remote Head cannot turn power to the scanner off or on Therefore consider connecting the power lead of the scanner to a terminal on your vehicle that is turned off when you turn off the ignition key Control Cable The ten foot supplied Control Cable has a stereo mini plug on one end and a scanner serial connector on the other Insert the mini plug into the REMOTE jack on the rear of the Remote Head Route the cable through the guides to keep the cable correctly positioned Then route the remainder of the cable toward the location of your target scanner When doing so be sure to avoid sharp metal edges
12. mote Head repeatedly press the VOL control The display cycles through available backlight brightness levels including off Stop when you reach the desired level 17 Brightness Auto Adjust mobile scanners only When you connect a mobile scanner the Remote Head automatically adjusts its backlight brightness level to match the brightness level of the target mobile scanner If you change the brightness level on either the Remote Head or the target scanner the level changes on both devices at the same time This function is not available on Handy Scanners Note If the Remote Head is connected to a BCT 15 scanner press F VOL control to change the backlight brightness level Configuration Menu Mode e To exit from the Menu Mode press SCAN Once you have the units on press MENU to enter HOLD or L O the Configuration Settings Options You can skip the e To re enter the Menu Mode turn the Remote head opening screens by holding MENU while turning on off then on while holding in MENU Ye the R ti Dea ee D enu Setting the BC RH96 LCD Contrast fe 3 Contr ras t 1 Rotate the rotary control to Set LOD e To select tees ae Mobi le Ortion Contrast then press the knob or E Yes screen rotate the knob to ser ll to theitemi Handy Ortion 2 Rotate the knob from Contrast 1 through Contrast 15 The LCD contrast changes with e To make a choice press E Yes or the rotary FUNC each level The default is level 8 knob
13. ndy scanner with the exception of the scanner s power control e It gives you three shortcut keys that you can assign to your scanner s most often used operations o It serves as a large LCD with your handy scanner e It recognizes the scanner baud rate for reliable communications between units e Its Volume and Squelch controls emulate those on the scanner e It provides a large easy to read LCD display with adjustable backligh and contrast levels e It emulates your mobile scanner s Close Call and Alert LED signals Please read the entire manual to familiarize yourself with installation and operation for maximum enjoyment FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e R
14. nobs to lock the Remote Head in position Attach the provided Cigarette Lighter Power Cord to the rear power jack marked DC IN 13 8V Then plug the adapter end into a dash mounted 12V DC socket Insert the 3 Conductor Mini Plug of the supplied ten foot cable in the REMOTE jack on the back of the scanner 5 Route the Remote Cable through the Slotted Guide 3 so it lies flat Route the Power Cord so it does not interfere with any other wires Using Hook and Loop Material The rear of the unit when all connectors and cables are properly routed is flat This permits using hook and loop material not supplied that has a heavy duty peel and stick adhesive on one side This material is generally available from electronic supply stores and hardware stores Do not apply the tape to the rear until all cables are installed and routed correctly Do not cover the slotted guide with the tape Follow the directions supplied with the hook and loop material Locate a suitable spot on the dash console or other area If you use the Remote Head in another place such as a radio room using tape lets you quickly mount or remove the Head as desired Note The two slots on the front of the Remote Head cannot be used for mounting These slots are cosmetic features only BC RH96 Connections Note Connect the Remote Cable and route it through the cable channel as i Always route both cables 1 DC Power Input Jack shown Then connect t
15. ously enabled only while pressing the Control or SQ knob Function mode is enabled for 3 seconds after releasing the Control or SQ knob Function mode is enabled for 5 seconds after releasing the Control or SQ knob Function mode is enabled for 10 seconds after releasing the Control or SQ knob Function mode is enabled until the Control or SQ knob is pressed again default Setting Auto Release Choose this option to set the Function Auto Release to n or OFF Turning the Auto Release on lets you press any key to exit the Function mode Turning the Auto Release off the default setting means you can only press the Function key to exit Function mode No other key has any effect 23 Miscellaneous Volume Settings For Handy Scanner While it is possible to configure the BC RH96 rotary FUNC control as your VOL control we suggest not doing so The VOL control still functions as a volume control If the FUNC control is configured as volume it is possible to have a situation that a very slight movement of the VOL control results in a sudden and loud increase in your audio It is best to configure the VOL control as volume in all cases Control Limitations There are some operations that cannot be performed using the BC RH96 Operation Scanner Type Power control All Wired and On Air Clone All Upside Down Display Mobile Backlight Scanner Control Handy Key Lock Operation Handy No Close Call amp Alert LED Handy
16. place the defective unit and return it to you without charge for parts service or any other cost except shipping an d handling incurred by warrantor or its representatives in connection with the performance of this warranty Warrantor at its opti on may replace the unit with a new or refurbished unit THE LIMITED WARRANTY SET FORTH ABOVE IS TH TO THE PRO OTHER WAR E SOLE AND E DUCT AND IS RANTIES OFA WHETHER EXPRESS IMPL OF LAW INC LUDING BUT WARRANTIES OF MERCHA PARTICULAR PURPOSE THIS WARRANTY DOES NOT COVER NTIRE WARRANTY PERTAINING LIEU OF AND EXCLUDES ALL Y NATURE WHATSOEVER ED OR ARISING BY OPERATION OT LIMITED TO ANY IMPLIED TABILITY OR FITNESS FORA 27 OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you LEGAL REMEDIES This warranty gives you specific legal rights and you may also have other rights which vary from state to state This warranty is void outside the United States of America and Canada PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY If after following the instructions in the owner s manual you are certain that the Product is defective pack the Product carefully preferably in its original packaging The Product should include all parts and accessories originally packaged with the
Download Pdf Manuals
Related Search