Home

Chariot Carriers Merci Installation manual

Contents

1.
2.
3.
4. 54 RU 8 24 13 9 40 AM He
5. ee
6. M10 M10
7. no
8. 1 1
9. OFF no
10. K INATIOTIKOU OFF
11. va TO rou
12. OFF c 1
13. rou va 1 1
14. 50 cm 1 1 Na TO va TO
15. o 1 HFC R410A TOU R410A
16. pe TO ISO 14122 va
17. Toshiba Carrier Corporation TIG O Toshiba Carrier Corporation
18. OFF R410A
19. B
20. Av o va
21. Toshiba Carrier Corporation Toshiba Carrier Corporation
22. 50 8 24 13 9 40 AM 46 GR 47 GR ELECTRICAL SHOCK HAZARD Disconnect all remote electric power supplies before servicing Moving parts Do not operate unit with grille removed Stop the unit before the servicing
23. Toshiba Carrier Corporation O TO
24. Toshiba Carrier Corporation Toshiba Carrier Corporation Toshiba Carrier Corporation
25. OFF ETTIOKEUWV 1 1 1
26. rou 500 V Megger 1 49 GR 1115150101_EN indd 25
27. 55 RU 1115150101_EN indd 28 28 500 B 1
28. Toshiba Carrier Corporation Toshiba Carrier Corporation
29. 1 1 T A M AS 3 Q a 1
30. R410A R410A 3
31. Toshiba Carrier Corporation KAIHATIOTIKWV Toshiba Carrier Corporation EV O
32. Toshiba Carrier Corporation O Toshiba Carrier Corporation TIG
33. 45 GR 1115150101 EN indd 23
34. CAUTION High temperature parts You might get burned when removing this panel ykaupa CAUTION Do not touch the aluminum fins of the unit Doing so may result in injury CAUTION BURST HAZARD Open the service valves before the operation otherwise there might be the burst 1115150101_EN indd 24 24 1 HE TIG
35. Toshiba Carrier Corporation O TOU
36. 1 1 50 ISO 14122
37. PEMOHTHUK Toshiba Carrier Corporation ero
38. 1 1 2
39. no R410A R410A R410A 1 6 R22 R410A
40. R410A 1 6 TOU R22 KAIMATIOTIKO R410A R410A
41. 2 OFF OFF TOU 1 1 OFF
42. va TOO TO ro R410A
43. 56 RU 8 24 13 9 40 AM 2 Accessory parts Part name Q ty Shape Usage Hand this directly to the customer Installation Manual 1 This manual For other languages that do not appear in this Installation Manual please refer to the enclosed CD R CD ROM 1 Installation Manual Drain nipple 1 EQ M Waterproof rubber cap 2 C 57 EN 1115150101_EN indd 29 3 Installation of new refrigerant air conditioner N CAUTION New refrigerant air conditioner installation This air conditioner adopts the new HFC refrigerant R410A which does not destroy ozone layer R410A refrigerant is apt to be affected by impurities such as water oxidizing membrane and oils because the working pressure of R410A refrigerant is approx 1 6 times as that of refrigerant R22 Accompanied with the adoption of the new refrigerant the refrigerant oil has also been changed Therefore during installation work be sure that water dust former refrigerant or refrigerant oil does not enter the new type refrigerant R410A air conditioner circuit To prevent mixing of refrigerant or refrigerant oil the sizes of connecting sections of charging port on main unit and installation tools are different from those of the conventional refrigerant units Accordingly special tools are required for the new refrigerant R410A units For connecting pipes use new an
44. O TO Toshiba Carrier Corporation Toshiba Carrier Corporation O
45. Toshiba Carrier Corporation ero Toshiba Carrier Corporation
46. CAUTION Do not touch the aluminum fins of the unit Doing so may result in injury CAUTION BURST HAZARD Open the service valves before the operation otherwise there might be the burst 1115150101_EN indd 27 27 1
47. 25 Mera o va
48. 48 GR 8 24 13 9 40 AM rou M10 M10
49. A nPOEIAONOIHEH rou TOU TOU K INATIOTIKOU 1 TOU
50. OFF OFF 1 1 OFF
51. O ON OFF Rapid flashing O ON OFF lt gt Slow flashing 7 After operating the system for at least 3 minutes close the valve on the liquid side 8 After the refrigerant has been recovered close the valve on the gas side 9 Hold down SWO1 and SWO2 simultaneously for at least 5 seconds The LED displays are returned to the initial status and the cooling operation and indoor fan operation stop 10 Turn off the power If there is any reason to doubt whether the recovery was successful in the course of this operation hold down SW01 and SWO2 simultaneously for at least 5 seconds to return to the initial status and then repeat the steps for recovering the refrigerant 1 EN indd 38 38 B Existing piping The following settings are required when using a pipe 019 1 mm as the existing piping at the gas pipe side Steps taken to support existing piping 1 Set the circuit breaker to the ON position to turn on the power 2 Check that the LED displays are placed in their initial status If not place them in the initial status 3 Hold down SWO1 for at least 5 seconds and check that D804 flashes slowly Fig 5 4 Press SWO1 four times to set the LED displays 0800 to D805 to the LED displays for existing piping settings shown below Fig 6 Fig 5 Fig 6 LED displays indicated when step 3 is taken LED displays for existing piping settings D800 D801 D802 D803 D804 D805 D800 D801
52. 50 n 51 RU 52 RU 26 1115150101_EN indd 26 8 24 13 9 40 AM 53 RU a ELECTRICAL SHOCK HAZARD Disconnect all remote electric power supplies before servicing Moving parts Do not operate unit with grille removed Stop the unit before the servicing CAUTION High temperature parts You might get burned when removing this panel
53. TWV
54. B Tightening of connecting part 1 Align the centers of the connecting pipes and fully tighten the flare nut with your fingers Then fix the nut with a wrench as shown in the figure and tighten it with a torque wrench Half union or packed valve Flare nut Co CC Externally N Internally threaded side threaded side Fix with wrench Tighten with torque wrench 2 As shown in the figure be sure to use two wrenches to loosen or tighten the flare nut of the valve on the gas side If you use a single crescent the flare nut cannot be tightened to the required tightening torque On the other hand use a single crescent to loosen or tighten the flare nut of the valve on the liquid side Unit Nem Outer dia of copper pipe Tightening torque 6 4 mm dia 14 to 18 1 4 to 1 8 kgfem 9 5 mm dia 34 to 42 3 4 to 4 2 kgfem 12 7 mm dia 49 to 61 4 9 to 6 1 kgfem 15 9 mm dia 63 to 77 6 3 to 7 7 kgfem VACUUM PUMP Outerdistor R410A tool used 4 Check for gas leaks at connection points copper pipe R410A R410A 6 4 Piping connection 9 5 Unit mm 127 0 to 0 5 1 0to 1 5 Liquid side Gas side 15 9 RAV Outer Outer diameter Thickness diameter Thickness SM56 06 4 0 8 012 7 0 8 Flaring dia size A Unit mm SM80 09 5 0 8 015 9 1 0 Outer dia of copper pipe A 4 6 4 9 9 9 5 13 2 12 7 16 6 15 9 19 7
55. Indicazione di avvertimento Descrizione ELECTRICAL SHOCK HAZARD Disconnect all remote electric power supplies before servicing AVVERTIMENTO PERICOLO DI SCOSSA ELETTRICA Scollegare tutte le fonti di alimentazione elettrica remote prima di Sottoporre a interventi di assistenza Moving parts Do not operate unit with grille removed Stop the unit before the servicing AVVERTIMENTO Parti mobili Non far funzionare l unit con la griglia rimossa Arrestare l unit prima di sottoporla ad assistenza CAUTION High temperature parts You might get burned when removing this panel ATTENZIONE Parti ad alta temperatura Quando si rimuove questo pannello sussiste il pericolo di ustione CAUTION Do not touch the aluminum fins of the unit Doing so may result in injury ATTENZIONE Non toccare le alette in alluminio dell unit In caso contrario si potrebbero provocare lesioni personali CAUTION BURST HAZARD Open the service valves before the operation otherwise there might be the burst ATTENZIONE PERICOLO DI SCOPPIO Aprire le valvole di servizio prima dell operazione in caso contrario si potrebbe verificare uno scoppio 1115150101 EN indd 12 12 1 Precauzioni per la sicurezza Il produttore non si assume alcuna responsabilit per eventuali danni causati dalla mancata osservanza delle istruzioni contenute in questo manuale NAVVERTIMENTO Gene
56. Remove the existing air conditioner from the piping and carry out flushing nitrogen pressure 0 5 MPa to remove any remains inside of the pipe Note In case of twin also be sure to flush the branching pipe Was largely discolored oil or a large quantity of remains discharged When the oil deteriorates the color of the oil changes to a muddy or black color NO Connect the indoor outdoor units to the existing pipe Use a flare nut attached to the main unit for the indoor outdoor units Do not use the flare nut of the existing pipe Re machine the flare machining size to size for R410A Y In case that a gas pipe 019 mm or bigger is used for the outdoor unit of SM80 3 HP Our RA10A model 3 to 6 HP gas pipe size is 015 9 mm See page 14 Existing piping Y Airtight test Vacuum dry Refrigerant charge Gas leak check Test run Nitrogen gas pressure 0 5 MPa If there is discharge of remains it is judged that a large quantity of remains are present YES gt Clean the pipes or use new pipes Piping necessary to change the flare nut machining size due to pipe compression 1 Flare nut width H mm Copper pipe outer 06 4 09 5 012 7 015 9 019 0 diameter O R410A 17 22 26 29 36 Same ror R22 Sa
57. Check for gas leaks using a leak tester for the HFC refrigerant 4 After the airtight test is completed evacuate the nitrogen gas Air purge To purge air use a vacuum pump Do not use refrigerant charged in the outdoor unit to purge air The air purge refrigerant is not contained in the outdoor unit Electrical wiring Be sure to fix the power wires and system interconnection wires with clamps so that they do not come into contact with the cabinet etc Earthing A WARNING Make sure that proper earthing is provided Improper earthing may cause an electric shock For details on how to check earthing contact the dealer who installed the air conditioner or a professional installation company Proper earthing can prevent charging of electricity on the outdoor unit surface due to the presence of a high frequency in the frequency converter inverter of the outdoor unit as well as prevent electric shock If the outdoor unit is not properly earthed you may be exposed to an electric shock Be sure to connect the earth wire grounding work Incomplete grounding can cause an electric shock Do not connect ground wires to gas pipes water pipes lightning rods or ground wires for telephone wires Test run Turn on the leakage breaker at least 12 hours before Starting a test run to protect the compressor during startup A CAUTION Incorrect installation work may result in a malfunction or complain
58. R22 8 24 13 9 40 AM 58 EN E Refrigerant piping New refrigerant R410A When using the conventional piping When using the conventional piping with no indication of applicable refrigerant types be sure to use it with a wall thickness of 0 8 mm for 26 4 mm 29 5 mm and 012 7 mm and with a wall thickness of 1 0 mm for 215 9 mm Do not use the conventional piping kit with a wall thickness less than these thicknesses due to insufficient pressure capacity When using general copper pipes Use general copper pipes with a wall thickness of 0 8 mm for 06 4 mm 09 5 mm and 012 7 mm and with a wall thickness of 1 0 mm for 015 9 mm Do not use any copper pipes with a wall thickness less than these thicknesses Flare nuts and flare machining The flare nuts and flare machining are different from those for the conventional refrigerant Use the flare nuts supplied with the air conditioner or those for R4 10A Before performing flare machining carefully read Refrigerant piping 59 EN 1115150101 EN indd 30 4 Installation conditions B Before installation Be sure to prepare to the following items before installation Length of refrigerant pipe lt SM56 gt Length of refrigerant pipe connected to indoor Item outdoor unit Addition of refrigerant is 5 to 20 m unnecessary at the local site lt Addition of refrigerant gt 24 to 30 m Add 20 g of refrigerant for every 1 m of piping that ex
59. R410A AUTI 3 mm va 8 24 13 9 40 AM 50 GR Bac To Toshiba 2006 42 EC
60. Prueba de funcionamiento Antes de utilizar el aparato de aire acondicionado despu s de completar el trabajo de instalaci n verifique que la cubierta de la caja de control el ctrico de la unidad interior y la cubierta de v lvula de la unidad exterior est n cerradas y coloque el disyuntor en la posici n ON Si conecta la alimentaci n sin realizar primero estas verificaciones puede recibir una descarga el ctrica o producirse otras lesiones Cuando note alg n problema en el aparato de aire acondicionado por ejemplo cuando aparece una visualizaci n de error hay olor a quemado se oyen ruidos anormales el aparato de aire acondicionado no refrigera ni calienta o hay fugas de agua no lo toque ponga antes el disyuntor en la posici n OFF y p ngase en contacto con una persona de mantenimiento cualificada Tome medidas colocando un aviso de Fuera de servicio cerca del disyuntor por ejemplo para asegurar que la alimentaci n no se conecte antes de que llegue la persona de mantenimiento cualificada Continuar usando el aparato de aire acondicionado teniendo este fallos puede causar un empeoramiento de los problemas mec nicos o causar descargas el ctricas etc Una vez realizados los trabajos previos utilice un medidor de aislamiento Megger de 500 V para comprobar que la resistencia entre la secci n con carga y la secci n met lica sin carga secci n de tierra es de 1 MO o superior Si el valor de la resistencia es bajo est
61. Charge port Valve core Setting pin Vacuum pump As shown in the figure connect the charge hose after the manifold valve is closed completely Attach the connecting port of the charge hose with a projection to push the valve core setting pin to the charge port of the set Open Handle Low fully Turn ON the vacuum pump 1 Loosen the flare nut of the packed valve Gas side a little to check that the air passes through 2 Retighten the flare nut Execute vacuuming until the compound pressure gauge indicates 101 kPa 76 cmHg 1 Close Handle Low completely Turn OFF the vacuum pump Leave the vacuum pump as it is for 1 or 2 minutes and check that the indicator of the compound pressure gauge does not return Open the valve stem or valve handle fully First at liquid side then gas side Disconnect the charge hose from the charge port Tighten the valve and caps of the charge port securely 4 Use the vacuum pump vacuum pump adapter and gauge manifold correctly referring to the manuals supplied with each tool before using them Check that the vacuum pump oil is filled up to the specified line of the oil gauge 2 When air is not charged check again whether the connecting port of the discharge hose which has a projection to push the valve
62. Installeer de buiteneenheid zorgvuldig op een plaats die stevig genoeg is om het gewicht van de buiteneenheid te dragen De buitenunit kan omvallen en letsel veroorzaken indien deze op de verkeerde plaats wordt gemonteerd Ventileer de ruimte direct indien er tijdens het installeren koelmiddel lekt Wanneer gasvormig koelmiddel uit het toestel lekt en in contact komt met open vuur kunnen er giftige gassen ontstaan Koelmiddelleiding Monteer tijdens de installatiewerkzaamheden de koelmiddelleiding nauwkeurig voordat de airconditioner wordt bediend Als de compressor in werking wordt gesteld met de klep open en zonder koelmiddelbuis zuigt de compressor lucht aan en ontstaat er overdruk in het koelsysteem wat kan leiden tot verwondingen Draai de flensmoer met een momentsleutel aan op de voorgeschreven manier Als de flensmoer al te krachtig wordt aangedraaid kan de moer een tijd later barsten waardoor koelmiddel kan gaan lekken Na het installeren of verplaatsen van de airconditioner volgt u de aanwijzingen in de installatiehandleiding voor het volledig ontluchten van de leidingen zodat er in het koelsysteem geen ander gas overblijft dan alleen het koelmiddel Bij onvolledig ontluchten kan de airconditioner niet goed functioneren Gebruik stikstofgas voor de test op luchtdichtheid De oplaadslang moet zo worden aangesloten dat deze niet slap hangt Elektrische bedrading Alleen een bevoegd installateur 1 of een bevoegd onderhouds
63. When installing the foundation for an outdoor unit with downward piping consider the piping work Correct Absorb vibration with vibration proof rubber Fixing leg pads Foundation A 2 Correct Bottom plate of outdoor unit Foundation Support the bottom surface of the fixing leg that is in contact with and underneath the bottom plate of the outdoor unit In correct Do not support the outdoor unit only with the fixing leg If only the end of the fixing leg is supported itmay deform Ng Foundation Set the out margin of the anchor bolt to 15 mm or less 15 or less When water is to be drained through the drain hose attach the following drain nipple and waterproof rubber cap and use the drain hose Inner dia 16 mm sold on the market Also seal the screws securely with silicone material etc to prevent water from leaking Some conditions may cause dewing or dripping of water When collectively draining discharged water completely use a drain pan E zi CG Waterproof rubber cap 2 pcs Drain nipple Waterproof rubber cap Drain nipple E Base plate B For reference If a heating operation is to be continuously performed for a long time under the condition that the outdoor temperature is O C or lower draining defrosted water may be difficult due to the bottom plate freezing resulting in trouble
64. bis ein qualifizierter Servicetechniker eintrifft Die weitere Verwendung der Klimaanlage in diesem fehlerhaften Zustand kann zur Verschlimmerung der mechanischen Probleme oder zu elektrischen Schl gen usw f hren Stellen Sie nach den Arbeiten mit einem Isolationspr fger t 500 Volt Megaohmmeter sicher dass der Widerstand zwischen spannungsf hrendem Abschnitt und nicht spannungsf hrendem Abschnitt Erdabschnitt 1 MO oder h her ist Falls der Widerstandswert zu niedrig ist k nnen an der Benutzerseite Kriechstr me oder Stromschl ge verursacht werden 19 DE 1115150101_EN indd 10 Stellen Sie nach Abschluss der Installationsarbeiten sicher dass kein K ltemittel ausl uft und pr fen Sie Isolierwiderstand sowie Wasserableitung F hren Sie danach einen Testlauf durch um sicherzustellen dass die Klimaanlage ordnungsgem funktioniert Vergewissern Sie sich daher nach der Installation noch einmal dass kein K ltemittel austreten kann Wenn K ltemittelgase austreten und in einen Raum mit einem Herd oder Ofen gelangen kann es bei einer offenen Flamme zur Bildung von gesundheitssch dlichen Gasen kommen Dem Benutzer mitzuteilende Informationen Teilen Sie dem Benutzer nach Abschluss der Installationsarbeiten mit wo sich der Schutzschalter befindet Sollte der Benutzer nicht wissen wo sich der Schutzschalter befindet kann er diesen nicht ausschalten falls Probleme mit der Klimaanlage auftreten Wenn der L fterschut
65. 13 FR 1115150101 EN indd 7 Apr s l installation assurez vous que le gaz r frig rant ne fuit pas Si le gaz r frig rant fuit dans la pi ce et s coule proximit d une source inflammable telle qu une cuisini re un gaz nocif peut se d gager Explications donn es l utilisateur Al issue de l installation indiquez l utilisateur l emplacement du disjoncteur Si l utilisateur ne sait pas ou se trouve le coupe circuit il ou elle ne sera pas capable de le d sactiver au cas o un probl me surviendrait au niveau du climatiseur Si vous avez d couvert que la protection du ventilateur est endommag e n approchez pas de l unit ext rieure et r glez le coupe circuit en position OFF ensuite contactez une personne d entretien qualifi e 1 afin d effectuer les r parations Ne r glez pas le disjoncteur en position ON avant que les r parations soient termin es Apr s l installation reportez vous au Mode d emploi pour expliquer au client comment utiliser l unit et effectuer son entretien R installation Seuls un installateur qualifi 1 ou une personne d entretien qualifi e 1 sont autoris s d placer le climatiseur D placer le climatiseur par une personne non qualifi e repr sente un danger tant donn qu un incendie une lectrocution des blessures des fuites d eau des parasites et ou des vibrations peuvent en r sulter Lors de la r alisation du travail de pompage coupez le compresseur a
66. Il tubo flessibile di carico deve essere collegato in modo tale da non essere lasco Cavi elettrici Soloun installatore qualificato 1 o un tecnico dell assistenza qualificato 1 sono autorizzati a eseguire i lavori sull impianto elettrico per il condizionatore d aria In nessuna circostanza tali lavori devono essere effettuati da una persona non qualificata poich un esecuzione non appropriata dei lavori potrebbe provocare scosse elettriche e o dispersioni di corrente Eseguire il collegamento delle varie unit in accordo alle norme locali in atto Riduzioni di capacit del circuito di alimentazione o un installazione incompleta possono causare scosse elettriche o incendi Utilizzare cablaggi che soddisfino le specifiche nel Manuale di installazione e le direttive delle norme e nelle leggi locali L uso di cablaggi che non soddisfino le specifiche potrebbe provocare scosse elettriche dispersioni di corrente fumo e o un incendio necessario collegare i cavi di messa a terra Cablaggio di messa a terra Una messa a terra incompleta pu provocare una scossa elettrica Non collegare i fili elettrici di messa a terra a tubi del gas tubi dell acqua e parafulmini o fili elettrici di messa terra per cavi telefonici Dopo aver completato i lavori di riparazione o di trasferimento verificare che i fili elettrici di messa a terra siano collegati correttamente Installare un interruttore automatico che soddisfi le specifiche nel
67. Or r 49 O ut emote sako e controller e Outdoor unit Indoor unit Earth Circuit breaker Connect the system interconnection wires to the identical terminal numbers on the terminal block of each unit Incorrect connection may cause a failure For the air conditioner connect a power wire with the following specifications Model RAV SM56 SM80 Power suppl 220 240 V 50 Hz 220 V 60 Hz Maximum running current 15 5 A Installation fuse rating 20 A all types can be used Power supply wire H07 RN F or 60245 IEC 66 2 5 mm or more System interconnection wires H07 RN F or 60245 IEC 66 1 5 mm or more 70 EN 8 24 13 9 40 AM How to wire 1 Remove the terminal cover by taking off the mounting screw 1 piece 2 Connect the power supply wires and system interconnection wires to the terminal block of the electrical control box to the connecting section of the terminal block Attach the terminal cover gt the outdoor unit touch any electrical or metal parts Use wires long enough to cover the entire length Terminal cover For system interconnection wires do not use a wire joined to another on the way Tighten the screws of the terminal block connect the wires matching the terminal numbers Do not apply tension When connecting the system interconnection wire to the outdoor unit terminal prevent water from co
68. cifications peut donner lieu des d charges lectriques une dispersion lectrique de la fum e et ou un incendie Veillez raccorder les fils de terre Mise la terre Une mise la terre incompl te entraine une d charge lectrique Neraccordez pas le fil de terre au tuyau de gaz aux canalisations d eau et au paratonnerre ou au fil de terre d un t l phone Apr s avoir termin le travail de r paration ou de d placement assurez vous que le fil de terre est correctement raccord Installez un disjoncteur respectant les specifications du manuel d installation et les dispositions des r glementations et de la l gislation locales Installez le disjoncteur un endroit facilement accessible par l agent Lors de l installation du disjoncteur l ext rieur installez en un qui soit concu pour l ext rieur Le c ble d alimentation ne doit en aucun cas pr sent de rallonge Des probl mes de raccordement dans des endroits ou le cable pr sente une rallonge peuvent entrainer de la fum e et ou un incendie Essai de fonctionnement Avant de faire fonctionner le climatiseur apr s avoir termin le travail assurez vous que le couvercle du boitier de commande lectrique de l unit int rieure et du cache de vanne de l unit ext rieure sont ferm s ensuite r glez le disjoncteur sur la position ON Vous pouvez recevoir un choc lectrique etc si l alimentation est activ e sans avoir d abord effectuer ces v
69. new pipes for the refrigerant piping works 3 When the outdoor unit was left with the pipes disconnected or the gas leaked from the pipes and the pipes were not repaired and refilled There is the possibility of rain water or air including moisture entering the pipe 4 When refrigerant cannot be recovered using a refrigerant recovery unit 79 EN 1115150101 EN indd 40 There is the possibility that a large quantity of dirty oil or moisture remains inside the pipes 5 When a commercially available dryer is attached to the existing pipes There is the possibility that copper green rust has been generated 6 When the existing air conditioner is removed after refrigerant has been recovered Check if the oil is judged to be clearly different from normal oil The refrigerator oil is copper rust green in color There is the possibility that moisture has mixed with the oil and rust has been generated inside the pipe There is discolored oil a large quantity of residue or a bad smell A large quantity of shiny metal dust or other wear residue can be seen in the refrigerant oil When the air conditioner has a history of the compressor failing and being replaced When discolored oil a large quantity of residue shiny metal dust or other wear residue or mixture of foreign matter is observed trouble will occur 8 When temporary installation and removal of the air conditioner are repeated such as when leased etc 9 If
70. rifications Si vous avez remarqu qu un quelconque probl me comme lorsque l affichage d une erreur est apparu une odeur de br l survient des sons anormaux sont entendus le climatiseur ne parvient pas refroidir ou r chauffer ou une fuite d eau est pr sente est survenu au niveau du climatiseur ne touchez pas le climatiseur vous m me et r glez le disjoncteur sur la position OFF ensuite contactez une personne d entretien qualifi e Prenez des mesures pour garantir que l alimentation ne sera pas branch e en indiquant hors service pr s du disjoncteur par exemple jusqu ce que le technicien d entretien qualifi arrive Continuer utiliser le climatiseur alors qu il pr sente un probl me peut entrainer des probl mes m caniques ou donner lieu des chocs lectriques etc Une fois le travail termin veillez utiliser un contr leur d isolement m gohmme tre de 500 V afin de v rifier que la r sistance est de 1 MO minimum entre la section de charge et la section m tallique sans charge section terre Si la valeur de r sistance est faible une catastrophe telle qu une fuite ou une lectrocution se produit sur le c t utilisateur Al issue du travail d installation v rifiez qu il n y a pas de fuites de fluide frigorig ne et v rifiez la r sistance d isolation ainsi que l vacuation d eau Ensuite effectuez un essai de fonctionnement afin de vous assurer que le climatiseur fonctionne correctement
71. 29 ES 1115150101_EN indd 15 15 7 Precauciones de seguridad El fabricante no asumira ninguna responsabilidad por los da os causados por no seguir las descripciones de este manual NADVERTENCIA Generalidades Antes de empezar a instalar el aparato de aire acondicionado lea atenta y completamente el manual de instalaci n y siga sus instrucciones para el instalar aparato de aire acondicionado Solo un instalador cualificado 1 o una persona de mantenimiento cualificada 1 est n autorizados a instalar el aparato de aire acondicionado Si una persona no cualificada instala el aparato de aire acondicionado puede que se produzca un incendio descargas el ctricas lesiones fugas de agua ruido y o vibraci n Ala hora de rellenar o cambiar el refrigerante no utilice un refrigerante distinto del especificado De lo contrario podr a generarse una presi n excesivamente alta en el ciclo de refrigeraci n pudiendo ocasionar un fallo o explosi n del producto o lesiones corporales Al transportar la unidad de aire acondicionado utilice una carretilla elevadora y al mover el aire acondicionado con la mano solicite la ayuda de otra persona Antes de abrir la rejilla de admisi n de la unidad interior o la cubierta de la v lvula de la unidad exterior coloque el disyuntor en la posici n OFF Si no se coloca el disyuntor en la posici n OFF se puede producir una descarga el ctrica por contacto con las piezas interiores So
72. 73 EN 1115150101 EN indd 37 B Refrigerant recovery When recovering the refrigerant in situations such as when relocating an indoor unit or outdoor unit the recovery operation can be performed by operating the SW01 and 5 02 switches on the P C board of the outdoor unit A cover for the electric parts has been installed in order to provide protection from electric shocks while work is being performed Operate the service switches and check the LED displays with this electric parts cover in place Do not remove this cover while the power is still on NDANGER The entire P C board of this air conditioner system is a high voltage area When operating the service switches with the power of the system left on wear electrically insulated gloves Service switches LED displays SWO01 SW02 O O O O O O D800 D801 D802 D803 D804 D805 Yellow Yellow Yellow Yellow Yellow Green There are four LEDs display patterns O ON OFF Rapid flashing 5 times sec Slow flashing 1 time sec In the initial LED display status D805 is lighted as shown on the right If the initial status is not established if D805 is flashing hold down the SWO1 and SWO2 service switches simultaneously for at least 5 seconds to return the LED displays to the initial status LED display initial status D800 D801 D802 D803 D804 D805 Yellow Yellow Yel
73. Cascos de seguridad de uso industrial Transporte de objetos pesados Calzado con protecci n adicional en las punteras Reparaci n de la unidad exterior Guantes para protegerse de las descargas el ctricas 8 24 13 9 40 AM 28 ES indicaciones de advertencia en la unidad de aire acondicionado Indicaci n de advertencia Descripci n ELECTRICAL SHOCK HAZARD Disconnect all remote electric power supplies before servicing ADVERTENCIA PELIGRO DE DESCARGA EL CTRICA Desconecte todas las fuentes de alimentaci n remotas antes de efectuar reparaciones Moving parts Do not operate unit with grille removed Stop the unit before the servicing ADVERTENCIA Piezas m viles No utilice la unidad con la rejilla retirada Pare la unidad antes de hacer reparaciones CAUTION High temperature parts You might get burned when removing this panel PRECAUCI N Piezas a alta temperatura Al retirar este panel podr a quemarse CAUTION Do not touch the aluminum fins of the unit Doing so may result in injury PRECAUCI N No toque las aletas de aluminio de la unidad De hacerlo podr a sufrir lesiones personales CAUTION BURST HAZARD Open the service valves before the operation otherwise there might be the burst PRECAUCI N PELIGRO DE ROTURA Abra las v lvulas de servicio antes de la operaci n de lo contrario podr an producirse roturas
74. D802 D803 D804 D805 O e e e o e e e O e 8 O ON OFF lt gt Slow flashing O ON OFF Rapid flashing 5 Press SWO2 to set D805 to rapid flashing Each time SWO2 is pressed D805 is switched between rapid flashing and OFF Fig 7 6 Hold down SWO2 for at least 5 seconds and check that D804 flashes slowly and that D805 lights Fig 8 Fig 7 Fig 8 LED displays indicated when step 5 is taken LED displays indicated when step 6 is taken D800 D801 D802 D803 D804 D805 D800 D801 D802 D803 D804 D805 e e O e e 9 O e o O O ON OFF Rapid flashing O ON OFF lt gt Slow flashing 7 Hold down SWO1 SWO2 simultaneously for at least 5 seconds to return the LED displays to the initial status The existing piping is now supported by taking the above steps In this status the heating capacity may decrease during heating depending on the outside air temperature and indoor temperature If there is any reason to doubt whether establishing support was successful in the course of this operation hold down SW01 SW02 simultaneously for at least 5 seconds to return to the initial status and then repeat the setting steps 8 24 13 9 40 AM 76 EN 77 EN 111515010 39 How to check the existing piping settings You can check whether the existing piping settings are enabled 1 Check that th
75. agente con las cualificaciones y conocimientos descritos en la tabla que aparece a continuaci n Agente Cualificaciones y conocimientos que debe tener el agente Elinstalador cualificado es una persona que instala mantiene recoloca y se deshace de los aparatos de aire acondicionado fabricados por Toshiba Carrier Corporation El o ella han sido formados para instalar mantener recolocar y deshacerse de los aparatos de aire acondicionado fabricados por Toshiba Carrier Corporation o en otro caso han recibido instrucciones para realizar tales operaciones de un individuo o individuos ya formados y que por lo tanto tienen un conocimiento extenso relacionado con estas operaciones El instalador cualificado con permiso para realizar el trabajo el ctrico de la instalaci n recolocaci n y desecho tiene las cualificaciones correspondientes a este trabajo el ctrico seg n lo estipulan las leyes y las normas locales y l o ella es una persona que ha sido formada en temas relacionados con el trabajo el ctrico de los aparatos de aire acondicionado fabricados por Toshiba Carrier Corporation o en otro caso l o ella han recibido instrucciones para realizar tales trabajos de un individuo o individuos ya formados y que por lo tanto tienen un conocimiento extenso relacionado con este trabajo El instalador cualificado con permiso para realizar el trabajo de manejo del refrigerante y de los tubos durante la instalaci n recolocaci n y desecho t
76. aluminum fins of the unit Doing so may result in injury ATEN O N o toque nas palhetas de alum nio da unidade Caso contr rio poder ferir se CAUTION BURST HAZARD Open the service valves before the operation otherwise there might be the burst ATEN O PERIGO DE EXPLOS O Abra as v lvulas de servi o antes de utilizar o equipamento caso contr rio pode ocorrer uma explos o 1 Precau es de seguran a O fabricante n o assume qualquer responsabilidade pelos danos provocados por n o respeitar as descri es apresentadas no manual Aviso Geral Antes de instalar o aparelho de ar condicionado leia cuidadosamente o Manual de Instala o e siga as instru es fornecidas para instalar o aparelho de ar condicionado Apenas um instalador qualificado 1 ou um t cnico de assist ncia qualificado 1 pode instalar o aparelho de ar condicionado Se o aparelho de ar condicionado for instalado por uma pessoa n o qualificada pode ocorrer um inc ndio choques el ctricos les es fugas de agua ru dos e ou vibrag es N o utilize qualquer refrigerante diferente do especificado para complemento ou substitui o Caso contr rio pode ocorrer press o anormalmente elevada no ciclo de refrigerac o que pode resultar em falha ou explos o do produto ou uma les o em seu corpo Quando transportar o aparelho de ar condicionado utilize um empilhador e quando mover o aparelho de ar c
77. anterior o aceite refrigerante en el ciclo del nuevo tipo de aparato de aire acondicionado con refrigerante R410A Para evitar la mezcla de l quido refrigerante o aceite refrigerante incorrectos los tama os de las secciones de conexi n del orificio de carga de la unidad principal y de las herramientas de instalaci n son diferentes de los de las unidades refrigerantes convencionales Por lo tanto se requieren herramientas especiales para las unidades con el nuevo refrigerante R410A Para conectar los tubos utilice materiales de tubo nuevos y limpios fabricados exclusivamente para R410A de manera que no penetre agua ni polvo en su interior Para desconectar el dispositivo de la fuente de alimentaci n Este aparato se debe conectar a la fuente de alimentaci n principal mediante un interruptor con una separaci n de contactos de 3 mm como m nimo Debe utilizarse un fusible de instalaci n se pueden utilizar fusibles de todos los tipos para la l nea de suministro de energ a el ctrica de este acondicionador de aire No lave los aparatos de aire acondicionado con dispositivos de lavado a presi n Las fugas el ctricas pueden causar descargas el ctricas o incendios 8 24 13 9 40 AM 32 ES 17 Obrigado por ter adquirido este aparelho de ar condicionado da Toshiba Definig o do Equipamento de Protec o Leia cuidadosamente estas instrug es que cont m informac es importantes em conformidade com a Directiva da Qu
78. bestens vertraut Der qualifizierte Servicetechniker der ber eine Erlaubnis f r H henarbeiten verf gt wurde speziell geschult Arbeiten an den von der Toshiba Carrier Corporation hergestellten Klimaanlagen an hochgelegenen Arbeitspl tzen auszuf hren Alternativ kann diese Person bez glich dieser Arbeiten von einem oder mehreren auf diesem Gebiet geschulten Mitarbeitern instruiert worden sein und ist somit mit dem f r diese Arbeiten erforderlichen Wissen bestens vertraut 15 DE 16 DE 1115150101_EN indd 8 8 24 13 9 40 AM 17 DE Warnhinweise am Klimager t Warnanzeige Beschreibung ELECTRICAL SHOCK HAZARD Disconnect all remote electric power supplies before servicing WARNUNG GEFAHR EINES STROMSCHLAGS Trennen Sie alle fernen Stromversorgungsquellen vom Netz bevor Sie Wartungsarbeiten ausf hren Moving parts Do not operate unit with grille removed Stop the unit before the servicing WARNUNG Bewegliche Teile Bedienen Sie nicht das Ger t wenn das Gitter entfernt wurde Stoppen Sie das Ger t bevor Sie es warten CAUTION High temperature parts You might get burned when removing this panel VORSICHT Teile mit hohen Temperaturen Es besteht die Gefahr dass Sie sich verbrennen wenn Sie diese Abdeckung entfernen CAUTION Do not touch the aluminum fins of the unit Doing so may result in injury VORSICHT Ber hren Sie nicht die Aluminiumlamellen
79. cnico de assist ncia qualificado 1 pode efectuar o trabalho el ctrico do aparelho de ar condicionado Este trabalho n o deve ser efectuado por uma pessoa n o qualificada em nenhuma circunst ncia porque um trabalho executado incorrectamente pode resultar em choques el ctricos e ou fugas el ctricas O aparelho deve ser instalado em conformidade com os regulamentos nacionais relativos a instala es el ctricas Se o circuito de alimenta o n o tiver capacidade suficiente ou a instala o ficar incompleta podem ocorrer choques el ctricos ou inc ndios Utilize cablagens que cumpram as especifica es fornecidas no manual de instala o e as condi es nas leis e regulamentos locais A utiliza o de cablagens que n o cumpram as especifica es pode originar choques el ctricos fugas el ctricas fumo e ou um inc ndio Certifique se de conectar o fio de terra Trabalho de conex o terra A liga o massa incompleta provoca um choque el ctrico N o ligue os fios de liga o massa a tubos de g s tubos de gua p ra raios ou fios de liga o massa de fios telef nicos Depois de concluir o trabalho de repara o ou mudan a verifique se os fios de liga o massa est o ligados correctamente Instale um disjuntor que cumpra as especifica es fornecidas no manual de instala o e as condi es nas leis e regulamentos locais Instale o disjuntor num local de f cil acesso ao agente Qua
80. contiennent des informations importantes concernant la conformite a la Directive Materiel Directive 2006 42 CE et assurez vous de les comprendre Apr s avoir lu ces instructions veillez les conserver en lieu s r avec le Manuel du propri taire et le Manuel d installation fournis avec votre produit Denomination generique Climatiseur Definition d un installateur qualifie ou technicien d entretien qualifie Le climatiseur doit tre install entretenu r par et enlev par un installateur qualifi ou une personne d entretien qualifi e Lorsqu une de ces op rations doit tre effectu e demandez un installateur qualifi ou un technicien d entretien qualifi de les ex cuter pour vous Un installateur qualifi ou technicien d entretien qualifi est un agent qui a les qualifications et connaissances d crites dans le tableau ci dessous Agent Qualifications et connaissances que cet agent doit poss der L installateur qualifi est une personne qui installe entretient d place et enl ve les climatiseurs fabriqu s par Toshiba Carrier Corporation Il ou elle a t form pour installer entretenir d placer et enlever les climatiseurs fabriqu s par Toshiba Carrier Corporation ou alternativement il ou elle a recu des consignes concernant de telles op rations par une ou des personnes qui ont t form es et a par cons quent acquis toutes les connaissances associ es ces op rations L install
81. core is firmly connected to the charge port 8 24 13 9 40 AM 68 EN 69 EN 111515010 B How to open the valve Open or close the valve Liquid side gas side Open the valve with hexagon wrench Hexagonal wrench is required Hexagonal wrench size Liquid side Gas side SM56 4mm 4mm SM80 4mm 5 mm Valve handling precautions Open the valve stem until it strikes the stopper It is unnecessary to apply further force Securely tighten the cap with a torque wrench Cap tightening torque 35 B Replenishing refrigerant This model is a 20 m chargeless type that does not need to have its refrigerant replenished for refrigerant pipes up to 20 m When a refrigerant pipe longer than 20 m is used add the specified amount of refrigerant Refrigerant replenishing procedure 1 After vacuuming the refrigerant pipe close the valves and then charge the refrigerant while the air conditioner is not working 2 When the refrigerant cannot be charged to the specified amount charge the required amount of refrigerant from the charge port of the valve on the gas side during cooling Requirement for replenishing refrigerant Replenish liquid refrigerant When gaseous refrigerant is replenished the refrigerant composition varies which disables normal operation Adding additional refrigerant 21 30 L SM56 20 9 x L 20 SM80 40 g x L 20 14 to 18 Nem gem 1 4 to
82. de concentratielimiet in de kamer niet wordt overschreden Raadpleeg de dealer van wie u de airconditioner hebt gekocht voor nader advies over de maatregelen Als er zich sterk geconcentreerd koelmiddel ophoopt kan dat ongelukken door zuurstofgebrek veroorzaken Installeer de airconditioner niet op een plaats waar brandbare gassen vrijkomen i v m ontploffingsgevaar Als er brandbaar gas lekt en zich ophoopt rondom de unit kan er brand ontstaan Bij het vervoeren van de airconditioner dient u schoeisel met verstevigde neuzen te dragen Bij het vervoeren van de airconditioner mag u die niet optillen aan de banden rond de verpakkingsdoos Mochten de banden breken dan loopt u kans op verwondingen Zet geen verbrandingsapparaat op een plaats waar het in de directe luchtstroom van de airconditioner staat anders kan er onvolledige verbranding plaatsvinden 42 NL 8 24 13 9 40 AM Installeren Installeer de airconditioner op een plaats die stevig genoeg is om het gewicht van het apparaat te dragen Als de plek niet stevig genoeg is kan het apparaat vallen wat letsel kan veroorzaken Bij het installeren van de airconditioner volgt u de aanwijzingen in de installatiehandleiding Als u die aanwijzingen niet opvolgt kan het product vallen of kantelen of kunnen er bijgeluiden trillingen waterlekkage e d optreden Gebruik bij het installeren de bouten M10 en moeren M10 die bestemd zijn voor het vastzetten van de buiteneenheid
83. frig rant R410A Pour les conduites de liaison vous devez utiliser de la tuyauterie neuve et propre con ue pour le R410A et vous devez veiller ce que de l eau ou des poussi res ne p n trent pas dans le circuit Pour d connecter l appareil du secteur Cet appareil doit tre connect au secteur via un interrupteur ayant une s paration de contact d au moins 3 mm Vous devez utiliser un fusible d installation tous les types de fusible peuvent tre utilis s pour la ligne d alimentation de ce climatiseur Ne lavez pas le climatiseur avec de l eau sous pression Les fuites lectriques peuvent vous lectrocuter ou provoquer un incendie 8 24 13 9 40 AM 14 FR Vielen Dank dass Sie diese Klimaanlage von Toshiba erworben haben Definitionen zur Schutzkleidung Lesen Sie diese Anweisungen sorgf ltig durch Sie enthalten wichtige Informationen im Einklang mit der Wenn die Klimaanlage transportiert installiert gewartet repariert oder entsorgt werden soll tragen Sie Maschinenrichtlinie Richtlinie 2006 42 EG Stellen Sie sicher dass Sie diese Anweisungen verstanden haben Schutzhandschuhe und Arbeitsschutzbekleidung Nachdem Sie diese Anweisungen gelesen haben bewahren Sie sie unbedingt an einem sicheren Ort zusammen Tragen Sie zus tzlich zu dieser normalen Schutzkleidung die unten aufgef hrte Schutzkleidung wenn Sie die in mit dem Benutzerhandbuch und dem Ihrem Produkt beiliegenden Installationshandbuch auf der unteren Tab
84. impianti elettrici definite dalle leggi e dalle normative locali e tale persona stata addestrata relativamente agli argomenti pertinenti ai lavori sugli impianti elettrici per i condizionatori d aria prodotti da Toshiba Carrier Corporation o in alternativa ha ricevuto istruzioni relative a tali argomenti da parte di uno o pi individui che sono stati addestrati e pertanto ha piena dimestichezza con le nozioni relative a tali lavori qualificato Il tecnico dell assistenza qualificato che autorizzato a occuparsi della gestione del refrigerante e dei lavori sulle tubature implicati nell installazione riparazione trasferimento e rimozione dispone delle qualifiche relative a tale gestione del refrigerante e a tali lavori sulle tubature definite dalle leggi e dalle normative locali e tale persona stata addestrata relativamente agli argomenti pertinenti alla gestione del refrigerante e ai lavori sulle tubature per i condizionatori d aria prodotti da Toshiba Carrier Corporation o in alternativa ha ricevuto istruzioni relative a tali argomenti da parte di uno o piu individui che sono stati addestrati e pertanto ha piena dimestichezza con le nozioni relative a tali lavori ll tecnico dell assistenza qualificato che amp autorizzato a lavorare in altezza stato addestrato relativamente agli argomenti pertinenti al lavoro in altezza con i condizionatori d aria prodotti da Toshiba Carrier Corporation o in alternativa
85. indd 32 Obstacles in both front and rear of unit Open above and to the right and left of the unit The height of an obstacle in both the front and rear of the unit should be lower than the height of the outdoor unit Standard installation 1 Single unit installation so oo WE PAS LES LS AP 47 y Y m 5 So s 2 Serial installation of two or more units 5g oo o m 300 or 3000 5 9 more o nr Seg Serial installation in front and rear Open above and to the right and left of the unit The height of an obstacle in both the front and rear of the unit should be lower than the height of the outdoor unit Standard installation of e e kh kl 1 000or 300 or 1 500 or 2 000 or 200 or more more more more more 32 H Installation of outdoor unit Before installation check the strength and horizontalness of the base so that abnormal sounds do not emanate According to the following base diagram fix the base firmly with the anchor bolts Anchor bolt nut M10 x 4 pairs 90 600 90 108 4 Lah j str j 225 Drain hole eo eo ES As shown in the figure below install the foundation and vibration proof rubber pads to directly support the bottom surface of the fixing leg that is in contact with and underneath the bottom plate of the outdoor unit
86. installation relocation and removal has the qualifications pertaining to this refrigerant handling and piping work as stipulated by the local laws and regulations and he or she is a person who has been trained in matters relating to refrigerant handling and piping work on the air conditioners made by Toshiba Carrier Corporation or alternatively he or she has been instructed in such matters by an individual or individuals who have been trained and is thus thoroughly acquainted with the knowledge related to this work The qualified installer who is allowed to work at heights has been trained in matters relating to working at heights with the air conditioners made by Toshiba Carrier Corporation or alternatively he or she has been instructed in such matters by an individual or individuals who have been trained and is thus thoroughly acquainted with the knowledge related to this work Qualified service person The qualified service person is a person who installs repairs maintains relocates and removes the air conditioners made by Toshiba Carrier Corporation He or she has been trained to install repair maintain relocate and remove the air conditioners made by Toshiba Carrier Corporation or alternatively he or she has been instructed in such operations by an individual or individuals who have been trained and is thus thoroughly acquainted with the knowledge related to these operations The qualified service person who is allowed to do
87. koelmiddelwerk zoals vastgelegd in de plaatselijke wetten en voorschriften en hij of zij is opgeleid voor buizenaanleg en koelmiddelwerk aan de airconditioners vervaardigd door de Toshiba Carrier Corporation of anders is hij of zij ge nstrueerd in dergelijke ingrepen door een persoon of personen die daarvoor zijn opgeleid en beschikt als zodanig over alle vereiste kennis voor deze ingrepen De bevoegd onderhoudsmonteur die kan worden toegestaan op hoge installatieplaatsen te werken is opgeleid inzake het werken op hoge installatieplaatsen aan de airconditioners vervaardigd door de Toshiba Carrier Corporation of anders is hij of zij ge nstrueerd in dergelijke ingrepen door een persoon of personen die daarvoor zijn opgeleid en beschikt als zodanig over alle vereiste kennis voor deze ingrepen Bevoegd onderhouds monteur 1115150101 EN indd 20 20 Definitie van beschermende kleding Wanneer de airconditioner wordt vervoerd ge nstalleerd onderhouden gerepareerd of verwijderd moet u beschermende werkhandschoenen en veiligheidskleding dragen Naast dergelijke normale veiligheidswerkkleding dient u de hieronder beschreven speciale beschermende kleding te dragen voor de werkzaamheden vermeld in de onderstaande tabel Werken aan de apparatuur zonder beschermende kleding te dragen is gevaarlijk omdat u kwetsbaarder bent voor verwondingen elektrische schokken brandwonden en ander letsel Te verrichten werkzaamheden B
88. located If the user does not know where the circuit breaker is he or she will not be able to turn it off in the event that trouble has occurred in the air conditioner If you have discovered that the fan guard is damaged do not approach the outdoor unit but set the circuit breaker to the OFF position and contact a qualified service person 1 to have the repairs done Do not set the circuit breaker to the ON position until the repairs are completed After the installation work follow the Owner s Manual to explain to the customer how to use and maintain the unit 1115150101 EN indd 4 Relocation Only a qualified installer 1 or qualified service person 1 is allowed to relocate the air conditioner It is dangerous for the air conditioner to be relocated by an unqualified individual since a fire electric shocks injury water leakage noise and or vibration may result When carrying out the pump down work shut down the compressor before disconnecting the refrigerant pipe Disconnecting the refrigerant pipe with the service valve left open and the compressor still operating will cause air etc to be sucked in raising the pressure inside the refrigeration cycle to an abnormally high level and possibly resulting in reputing injury etc 1 Refer to the Definition of Qualified Installer or Qualified Service Person NCAUTION New refrigerant air conditioner installation This air conditioner adopts the new HFC refrigerant R
89. por lo tanto tienen un conocimiento extenso relacionado con este trabajo La persona de mantenimiento cualificada con permiso para trabajar en lugares altos ha sido formada en temas relacionados con el trabajo en lugares altos con aparatos de aire acondicionado fabricados por Toshiba Carrier Corporation o en otro caso el o ella han recibido instrucciones para realizar tales trabajos de un individuo o individuos ya formados y que por lo tanto tienen un conocimiento extenso relacionado con este trabajo 1115150101_EN indd 14 14 Definici n del equipo de protecci n Cuando el aparato de aire acondicionado vaya a ser transportado instalado mantenido reparado o desechado p ngase guantes de protecci n y ropas de trabajo seguras Adem s de tal equipo de protecci n normal p ngase el equipo de protecci n descrito a continuaci n cuando realice trabajos especiales como los descritos en la tabla que aparece a continuaci n No ponerse el equipo de protecci n adecuado puede resultar peligroso ya que quedar m s expuesto a sufrir esiones quemaduras descargas el ctricas y otros da os Trabajo realizado Equipo de protecci n usado Guantes de protecci n Todo tipo de trabajos Ropa de trabajo segura Guantes para protegerse de las descargas el ctricas Zapatos aislantes Ropa de protecci n contra descargas el ctricas Trabajo relacionado con equipos el ctricos Trabajos en altura 50 cm o m s
90. sur ON par erreur Seulun installateur qualifi 1 ou une personne d entretien qualifi e 1 est autoris entreprendre un travail en hauteur l aide d un pied de 50 cm minimum Portez des gants de protection ainsi que des v tements de travail de s curit pendant l installation l entretien et la d pose Ne touchez pas l ailette en aluminium de l unit ext rieure Vous risquez de vous blesser dans le cas contraire Si vous devez toucher l ailette pour une raison quelconque mettez d abord des gants de protection et des v tements de travail de s curit ensuite proc dez l op ration Ne grimpez pas ou ne placez pas d objets sur le dessus de l unit ext rieure Vous ou les objets pourraient tomber de l unit ext rieure et ainsi vous blesser Lors de la r alisation d un travail en hauteur utilisez une chelle conforme la norme ISO 14122 ensuite suivez la proc dure concernant les instructions de l chelle Portez galement un casque de protection pour une utilisation dans l industrie comme tenue de protection pour entreprendre le travail Lors du nettoyage du filtre ou d autres pi ces de l unit ext rieure r glez le disjoncteur sur OFF sans faute et placez un panneau indicateur Travail en cours proximit du disjoncteur avant de commencer le travail Lors d un travail en hauteur placez un panneau indicateur afin que personne ne s approche du lieu de travail avant de commencer le travail D
91. ts m ssen beim Installieren des Ger ts verwendet werden Installieren Sie das Au enger t ordnungsgem an einem Ort der stark genug ist das Gewicht des Au enger ts zu tragen Ist der Ort nicht tragf hig kann das Au enger t herunterfallen und Verletzungen verursachen Wenn w hrend der Installation K ltemittel ausgetreten ist l ften Sie den Raum umgehend Beim Kontakt des K ltemittelgases mit einer offenen Flamme k nnen giftige Gase gebildet werden K ltemittelleitungen berpr fen Sie die sichere Installation der K ltemittelleitung bevor Sie das Klimager t in Betrieb nehmen Falls der Kompressor bei ge ffnetem Ventil und ohne K ltemittelrohr betrieben wird zieht der Kompressor Luft und der K ltemittelkreislauf ger t unter berdruck was zu Verletzungen f hren kann Ziehen Sie die B rdelmutter mit einem Drehmomentschl ssel wie angegeben fest berm iges Festziehen der B rdelmutter kann nach l ngerer Zeit zu Rissen in der B rdelmutter f hren wodurch K ltemittel auslaufen kann Wenn die Klimaanlage installiert oder umgesetzt wurde f hren Sie gem den Anweisungen im Installationshandbuch eine vollst ndige Luftsp lung aus so dass lediglich das K ltemittel im K hlkreislauf gemischt wird Wird keine vollst ndige Luftsp lung ausgef hrt k nnen Fehlfunktionen der Klimaanlage auftreten F r die Luftdichtepr fung muss Stickstoff verwendet werden Der Zuleitungsschlauch muss so angeschlosse
92. 04 D805 O e e e o e e e e e e O ON OFF Slow flashing O ON OFF Rapid flashing 4 Hold down SWO02 for at least 5 seconds and check that D804 flashes slowly Fig 13 5 Hold down SWO1 and SWO2 simultaneously for at least 5 seconds to return the LED displays to the initial status Fig 13 LED displays indicated when step 4 is taken D800 D801 D802 D803 D804 D805 e e e e o e O ON O OFF lt gt Slow flashing 1_EN indd 39 14 Troubleshooting You can perform fault diagnosis of the outdoor unit with the LEDs on the P C board of the outdoor unit in addition to using the check codes displayed on the wired remote controller of the indoor unit Use the LEDs and check codes for various checks Details of the check codes displayed on the wired remote controller of the indoor unit are described in the Installation Manual of the indoor unit ELED displays and check codes Display No Error D800 D801 D802 D803 D804 D805 1 Normal e e e e e O 2 Discharge temperature sensor TD error 9 9 9 O 3 Heat exchanger temperature sensor TE error 9 9 e O 4 Heat exchanger temperature sensor TL error O O e O 5 Outside air temperature sensor TO error e 9 8 9 6 Suction temperature sensor TS error e e O 7 Heat sink temperature se
93. 1 8 kgfem 14 to 18 Nem 295mm 1 4 to 1 8 kgfm Valve size 33 to 42 Nem 3 3 to 4 2 kgf m 33 to 42 Nem gm 3 3 to 4 2 kgfem 14 to 18 Nem 1 4 to 1 8 kgfem Charge port 1 EN indd 35 L Pipe length The refrigerant need not be reduced for a 20 meter or less refrigerant pipe TA Electrical work N CAUTION An installation fuse must be used for the power supply line of this air conditioner Incorrect incomplete wiring may lead to an electrical fire or smoke Prepare an exclusive power supply for the air conditioner This product can be connected to the mains power Fixed wire connections A switch that disconnects all poles and has a contact separation of at least 3 mm must be incorporated in the fixed wiring Be sure to use the cord clamps attached to the product Do not damage or scratch the conductive core or inner insulator of the power and system interconnection wires when peeling them Use the power and system interconnection wires with specified thicknesses specified types and protective devices required Remove valve cover screw Pull the valve cover downward to remove it Valve cover System interconnection wires B Wiring between indoor unit and outdoor u nit The dashed lines show on site wiring System Main circuit interconnection wires Input power
94. 410A which does not destroy ozone layer R410A refrigerant is apt to be affected by impurities such as water oxidizing membrane and oils because the working pressure of R410A refrigerant is approx 1 6 times as that of refrigerant R22 Accompanied with the adoption of the new refrigerant the refrigeration machine oil has also been changed Therefore during installation work be sure that water dust former refrigerant or refrigeration machine oil does not enter the new type refrigerant R410A air conditioner circuit To prevent mixing of refrigerant or refrigerating machine oil the sizes of connecting sections of charging port on main unit and installation tools are different from those of the conventional refrigerant units Accordingly special tools are required for the new refrigerant R410A units For connecting pipes use new and clean piping materials with high pressure fittings made for R410A only so that water and or dust does not enter To disconnect the appliance from main power supply This appliance must be connected to the main power supply by means of a switch with a contact separation of at least 3 mm The installation fuse all fuse types can be used must be used for the power supply line of this conditioner Do not wash air conditioners with pressure washers Electric leaks may cause electric shocks or fires 8 EN 8 24 13 9 40 AM Merci d avoir achete ce climatiseur Toshiba Lisez attentivement ces instructions qui
95. 8 manutenzione trasferire e rimuovere i condizionatori d aria prodotti da Toshiba Carrier Corporation o in alternativa ha ricevuto istruzioni relative a tali operazioni da parte di uno o pi individui che sono stati addestrati e pertanto ha piena dimestichezza con le nozioni relative a tali operazioni L installatore qualificato che autorizzato a svolgere i lavori sull impianto elettrico implicati nell installazione nel trasferimento e nella rimozione dispone delle qualifiche relative a tali lavori sull impianto elettrico definite dalle leggi e dalle normative locali e tale persona stata addestrata relativamente agli argomenti pertinenti ai lavori sugli impianti elettrici per i condizionatori d aria prodotti da Toshiba Carrier Corporation o in alternativa ha ricevuto istruzioni relative a tali argomenti da parte di uno o pi individui che sono stati addestrati e pertanto ha piena dimestichezza con le nozioni relative a tali lavori L installatore qualificato che autorizzato a occuparsi della gestione del refrigerante e dei lavori sulle tubature implicati nell installazione nel trasferimento e nella rimozione dispone delle qualifiche relative a tale gestione del refrigerante e a tali lavori sulle tubature definite dalle leggi e dalle normative locali e tale persona stata addestrata relativamente agli argomenti pertinenti alla gestione del refrigerante e ai lavori sulle tubature per i condizionatori d aria prodotti da Toshiba Car
96. G Warnings on refrigerant leakage Check of concentration limit The room in which the air conditioner is to be installed requires a design that in the event of refrigerant gas leaking out its concentration will not exceed a set limit The refrigerant R4 10A which is used in the air conditioner is safe without the toxicity or combustibility of ammonia and is not restricted by laws to be imposed which protect the ozone layer However since it contains more than air it poses the risk of suffocation if its concentration should rise excessively Suffocation from leakage of R410A is almost non existent If a conditioner system is to be installed in a small room select a suitable model and installation procedure so that if the refrigerant accidentally leaks out its concentration does not reach the limit and in the event of an emergency measures can be made before injury can occur In a room where the concentration may exceed the limit create an opening with adjacent rooms or install mechanical ventilation combined with a gas leak detection device The concentration is as given below Total amount of refrigerant kg lt Concentration limit kg m Min volume of the indoor unit installed room m3 The concentration limit of R4 10A which is used in air conditioners is 0 3 kg m V NOTE The minimum indoor floor area compared with the amount of refrigerant is roughly as follows When the ceiling is 2 7 m high tot Range belo
97. In case of flaring for R410A with the conventional flare tool pull the tool out approx 0 5 mm more than that for R22 to adjust it to the specified flare size The copper pipe gauge is useful for adjusting the projection margin size N CAUTION Do not put the crescent wrench on the cap The valve may break If applying excessive torque the nut may break according to some installation conditions After the installation work be sure to check for gas leaks of the pipe connections with nitrogen Pressure of R410A is higher than that of R22 Approx 1 6 times Therefore using a torque wrench tighten the flare pipe connecting sections that connect the indoor outdoor units at the specified tightening torque Incomplete connections may cause not only a gas leak but also trouble with the refrigeration cycle Wrench for fixing Valve at gas side Do not apply refrigerant oil to the flared surface 65 EN 66 EN 1115150101_EN indd 33 8 24 13 9 40 AM E Refrigerant pipe length Single odel Allowable pipe length m Height difference Indoor outdoor H m ode Total length L Indoor unit Upper Outdoor unit Lower SM56 30 30 30 SM80 30 30 30 Pipe diameter mm Model EM Number of bent portions Liquid side Gas side SM56 06 4 012 7 10 or less SM80 09 5 015 9 10 or less Figure of Single Indoor unit Outdoor unit 67 EN 1115150101_EN ind
98. Manuale di installazione e le direttive delle norme e delle leggi locali Installare l interruttore automatico in una sede che sia facilmente accessibile dall agente Quando si installa l interruttore automatico all aperto installarne uno progettato per l uso per esterno Non utilizzare in alcuna circostanza prolunghe del cavo elettrico di alimentazione Problemi di collegamento nelle sedi in cui si trovino prolunghe del cavo elettrico possono provocare fumo e o un incendio Prova di funzionamento Prima di far funzionare il condizionatore d aria dopo aver completato il lavoro verificare che il coperchio della centralina elettrica dell unit interna e il coprivalvole dell unit esterna siano chiusi e che l interruttore automatico sia impostato sulla posizione ON acceso Qualora si accenda l unit senza aver prima eseguito questi controlli si potrebbe subire una scossa elettrica o altre lesioni Quando si notato il verificarsi di un problema di qualche tipo con il condizionatore d aria ad esempio quando stata visualizzata un indicazione di errore si sente odore di bruciato si sentono suoni anomali il condizionatore non raffredda o non riscalda o presente una perdita d acqua non toccare da soli il condizionatore d aria ma impostare l interruttore automatico sulla posizione OFF spento e contattare un tecnico dell assistenza qualificato Adottare delle misure per assicurare che l unit non venga accesa ad esempio scrive
99. Sapatos isoladores Vestu ri tecg o contra ch l ctri conhecimentos descritos na tabela abaixo Trabalhos em altura Agente Qualificag es e conhecimentos necess rios do agente 50 cm ou mais Transporte de objectos pesados Capacetes industriais O instalador qualificado uma pessoa que instala mant m muda e elimina os aparelhos de ar condicionado fabricados pela Toshiba Carrier Corporation O instalador qualificado teve forma o Sapatos com protec o adicional para os dedos dos p s para instalar manter mudar e eliminar os aparelhos de ar condicionado fabricados pela Toshiba Repara o da Lupas para prolenercledidisias Carrier Corporation ou alternativamente recebeu instru es relacionadas com estas operag es de unidade exterior para proteg pessoas que tiveram forma o e por conseguinte tem conhecimentos relacionados com estas opera es O instalador qualificado e autorizado para efectuar o trabalho el ctrico envolvido na instala o mudan a e elimina o tem as qualifica es adequadas para este trabalho el ctrico conforme estipulado pelos regulamentos e as leis locais e uma pessoa que teve forma o relacionada com o trabalho el ctrico dos aparelhos de ar condicionado fabricados pela Toshiba Carrier Corporation ou alternativamente recebeu instru es relacionadas com estas opera es de pessoas que tiveram forma o e por conseguinte tem conhecime
100. TOSHIBA Leading Innovation gt gt AIR CONDITIONER SPLIT TYPE HFC Installation Manual Outdoor Unit Model name RAV SM564ATP E RAV SM564ATJP E RAV SM804ATP E RAV SM804ATJP E 1115150101 Original instruction Contents Please read this Installation Manual carefully before installing the Air Conditioner This Manual describes the installation method of th outdoor unit 1 Precautions for safety nnn 3 ms 1 Pr cautions relatives la s curit 6 1 Sicherheitshinweise 9 This Air Conditioner is a new type that has adopted a new refrigerant HFC R410A instead of the conventional 1 Precauzioni per la sicurezza 12 refrigerant R22 in order to prevent destruction of the ozone layer 1 Precauciones de seguridad 15 Equipment complying with IEC 61000 3 12 1 Precau es de seguran a 18 1 Veiligheidsvoorzorgen 21 1 24 1 27 2 Accessory parts ui AA 29 3 Installation of new refrigerant air c
101. When any ofthese jobs is to be done ask a qualified installer or qualified service person to do them for you A qualified installer or qualified service person is an agent who has the qualifications and knowledge described in the table below Agent Qualifications and knowledge which the agent must have Qualified installer The qualified installer is a person who installs maintains relocates and removes the air conditioners made by Toshiba Carrier Corporation He or she has been trained to install maintain relocate and remove the air conditioners made by Toshiba Carrier Corporation or alternatively he or she has been instructed in such operations by an individual or individuals who have been trained and is thus thoroughly acquainted with the knowledge related to these operations The qualified installer who is allowed to do the electrical work involved in installation relocation and removal has the qualifications pertaining to this electrical work as stipulated by the local laws and regulations and he or she is a person who has been trained in matters relating to electrical work on the air conditioners made by Toshiba Carrier Corporation or alternatively he or she has been instructed in such matters by an individual or individuals who have been trained and is thus thoroughly acquainted with the knowledge related to this work The qualified installer who is allowed to do the refrigerant handling and piping work involved in
102. a t form aux domaines relatifs au travail en hauteur avec les climatiseurs fabriqu s par Toshiba Carrier Corporation ou alternativement il ou elle a recu des consignes dans de tels domaines par une ou des personnes qui ont t form es et poss dent par cons quent toutes les connaissances requises pour ce travail Installateur qualifi La personne d entretien qualifi e est une personne qui installe r pare entretient d place et enl ve les climatiseurs fabriqu s par Toshiba Carrier Corporation Il ou elle a t form pour installer r parer entretenir d placer et enlever les climatiseurs fabriqu s par Toshiba Carrier Corporation ou alternativement il ou elle a re u des consignes pour de telles op rations par une ou des personnes qui ont t form es et a par cons quent acquis toutes les connaissances associ es ces op rations La personne d entretien qualifi e qui est autoris e effectuer un travail lectrique compris dans l installation la r paration le d placement et l enl vement poss de les qualifications n cessaires ce travail lectrique conform ment aux r glementations et la l gislation locales et il ou elle est une personne qui a t form e pour les probl mes relatifs au travail lectrique sur les climatiseurs fabriqu s par Toshiba Carrier Corporation ou alternativement il ou elle a re u des consignes dans de tels domaines par une ou des personnes qui ont t for
103. a test run to protect the compressor during To protect the compressor power is supplied from the 220 240 VAC input to the unit to preheat the compressor Check the following before starting a test run That all pipes are connected securely without leaks That the valve is open If the compressor is operated with the valve closed the outdoor unit will become overpressurized which may damage the compressor or other components If there is a leak at a connection air can be sucked in and the internal pressure further increases which may cause a burst or injury 1 7 Annual maintenance Operate the air conditioner in the correct procedure as specified in the Owner s Manual For an air conditioning system that is operated on a regular basis cleaning and maintenance of the indoor outdoor units are strongly recommended As a general rule if an indoor unit is operated for about 8 hours daily the indoor outdoor units will need to be cleaned at least once every 3 months This cleaning and maintenance should be carried out by a qualified service person Failure to clean the indoor outdoor units regularly will result in poor performance icing water leaking and even compressor failure 72 EN 8 24 13 9 40 AM 97 12Air conditioner operating conditions For proper performance operate the air conditioner under the following temperature conditions 15 C to 46 C 15 C to 15 C Cooling operation D
104. ando transportar instalar manter reparar ou eliminar o aparelho de ar condicionado utilize luvas de protec o Maquinaria Directiva 2006 42 CE e certifique se de que as compreende e vestu rio de trabalho de seguranga Depois de ler estas instru es certifique se de que as guarda juntamente com o Manual do Propriet rio e o Alem deste equipamento de protecg o normal utilize equipamento de protec o descrito abaixo quando Manual de Instalag o fornecidos com o produto efectuar o trabalho especial descrito detalhadamente na tabela abaixo A nao utilizac o do equipamento de protec o adequado perigoso porque fica mais susceptivel a les es Denominag o generica Aparelho de Ar Condicionado queimaduras choques electricos e outras les es Trabalho r Definig o de Instalador Qualificado ou de T cnico de Assist ncia Qualificado efectuado Equipamento de protecg o usado O aparelho de ar condicionado deve ser instalado mantido reparado e eliminado por um instalador qualificado ou Todos os tipos de Luvas de protecg o um t cnico de assist ncia qualificado Quando for necess rio efectuar qualquer um destes trabalhos peca a um trabalhos Vestu rio de trabalho de seguranga instalador qualificado ou a um t cnico de assist ncia qualificado para efectuar estes trabalhos Luvas para proteger electricistas Um instalador qualificado ou um t cnico de assist ncia qualificado um agente com as qualificag es e os Trabalho el ctrico
105. ateur qualifi qui est autoris effectuer un travail lectrique compris dans l installation le d placement et l enl vement poss de les qualifications n cessaires ce travail lectrique conform ment aux r glementations et la l gislation locales et il ou elle est une personne qui a t form e pour les probl mes relatifs au travail lectrique sur les climatiseurs fabriqu s par Toshiba Carrier Corporation ou alternativement il ou elle a re u des consignes dans de tels domaines par une ou des personnes qui ont t form es et poss dent par cons quent les connaissances relatives ce travail installateur qualifi qui est autoris manipuler du fluide frigorig ne et r aliser un travail de raccordement compris dans l installation le d placement et l enl vement poss de les qualifications n cessaires cette manipulation de fluide frigorig ne et de ce travail de raccordement conform ment aux r glementations et la l gislation locales et il ou elle est une personne qui a t form e pour les probl mes relatifs la manipulation de fluide frigorig ne et de travail de raccordement sur les climatiseurs fabriqu s par Toshiba Carrier Corporation ou alternativement il ou elle a recu des consignes dans de tels domaines par une ou des personnes qui ont t form es et poss dent par cons quent les connaissances relatives ce travail L installateur qualifi qui est autoris travailler en hauteur
106. ceeds 20 m Caution during addition of refrigerant When the total length of refrigerant piping exceeds 20 m add 20 g m of refrigerant up to a maximum total length of piping at 30 m Max amount of additional refrigerant is 200 g Charge the refrigerant accurately Overcharging may cause serious trouble with the compressor Do not connect a refrigerant pipe that is shorter than 5m This may cause a malfunction of the compressor or other devices lt SM80 gt Length of refrigerant pipe connected to indoor Item outdoor unit Addition of refrigerant is 5 to 20 m unnecessary at the local site lt Addition of refrigerant gt 121 to 30m Add 40 g of refrigerant for every 1 m of piping that exceeds 20 m Caution during addition of refrigerant When the total length of refrigerant piping exceeds 20 m add 40 g m of refrigerant up to a maximum total length of piping at 30 m Max amount of additional refrigerant is 400 g Charge the refrigerant accurately Overcharging may cause serious trouble with the compressor Do not connect a refrigerant pipe that is shorter than 5m This may cause a malfunction of the compressor or other devices Airtight test 1 Before starting an airtight test further tighten the spindle valves on the gas and liquid sides 2 Pressurize the pipe with nitrogen gas charged from the service port to the design pressure 4 15 Mpa to conduct an airtight test
107. claration becomes invalid iftechnical or operational modifications are introduced without the manufacturer s consent 82 EN 8 24 13 9 40 AM This product contains fluorinated greenhouse gases covered by the Kyoto Protocol R410A 1 975 Chemical Name of Gas Global Warming Potential GWP of Gas N CAUTION 1 Paste the enclosed refrigerant label adjacent to the charging and or recovering location Clearly write the charged refrigerant quantity on the refrigerant label using indelible ink Then place the included transparent protective sheet over the label to prevent the writing from rubbing off Prevent emission of the contained fluorinated greenhouse gas Ensure that the fluorinated greenhouse gas is never vented to the atmosphere during installation service or disposal When any leakage of the contained fluorinated greenhouse gas is detected the leak shall be stopped and repaired as soon as possible 4 Only qualified service personnel are allowed to access and service this product Any handling of the fluorinated greenhouse gas in this product such as when moving the product or recharging the gas shall comply under EC Regulation No 842 2006 on certain fluorinated greenhouse gases and any relevant local legislation Periodical inspections for refrigerant leaks may be required depending on European or local legislation Contact dealers installers etc for any questions N
108. confirming the reliability of the pipe strength are conventionally referred to the local site If the specified conditions can be cleared it is possible to update existing R22 and R407C pipes to those for R410A models Basic conditions needed to reuse existing pipes Check and observe the presence of three conditions in the refrigerant piping works 1 Dry There is no moisture inside of the pipes 2 Clean There is no dust inside of the pipes 3 Tight There are no refrigerant leaks Restrictions for use of existing pipes In the following cases the existing pipes should not be reused as they are Clean the existing pipes or exchange them with new pipes 1 When a scratch or dent is heavy be sure to use new pipes for the refrigerant piping works 2 When the existing pipe thickness is thinner than the specified Pipe diameter and thickness be sure to use new pipes for the refrigerant piping works The operating pressure of R410A is high 1 6 times that of R22 and R407C If there is a scratch or dent on the pipe or a thinner pipe is used the pressure strength may be inadequate which may cause the pipe to break in the worst case Pipe diameter and thickness mm Pipe outer diameter 06 4 09 5 012 7 015 9 019 0 R410A Thickness R22 0 8 0 8 0 8 1 0 1 0 R407C In case the pipe diameter is 912 7 mm or less and the thickness is less than 0 7 mm be sure to use
109. d 34 34 6 Air purging B Airtight test Before starting an airtight test further tighten the spindle valves on the gas side and liquid side Pressurize the pipe with nitrogen gas charged from the service port to the design pressure 4 15 Mpa to conduct the airtight test Perform gas leak checks using a leak tester for the HFC refrigerant After the airtight test is completed evacuate the nitrogen gas B Air purge With respect to the preservation of the terrestrial environment adopt Vacuum pump to purge air Evacuate air in the connecting pipes when installing the unit Do not discharge the refrigerant gas to the atmosphere to preserve the terrestrial environment Use a vacuum pump to discharge the air nitrogen etc that remains in the set If air remains the capacity may decrease For the vacuum pump be sure to use one with a backflow preventer so that the oil in the pump does not backflow into the pipe of the air conditioner when the pump stops If oil in the vacuum pump is put in an air conditioner including R410A it may cause trouble with the refrigeration cycle Compound pressure gauge 101 kPa Ng Pressure gauge Gauge manifold valve Handle High Keep fully closed Charge hose II For R410A only Charge hose ley For R410A only Vacuum pump adapter for counterflow prevention For R410A only 07 Vacuum pump Packed valve at gas side
110. d clean piping materials with high pressure fittings made for R410A only so that water and or dust does not enter B Required tools equipment and precautions for use Prepare the tools and equipment listed in the following table before starting the installation work Newly prepared tools and equipment must be used exclusively Legend A Prepared newly Use for R410A only Do not use for refrigerant R22 or R407C etc Conventional tools equipment are available Tools equipment Use How to use tools equipment Gauge manifold Charging hose Vacuuming charging refrigerant and operation check Prepared newly for R410A only N Prepared newly for R410A only Charging cylinder Can not be used Unusable Use the refrigerant charging measure instead Gas leak detector Gas leak check N Prepared newly Vacuum pump Vacuum drying Unusable Vacuum pump with backflow prevention function Vacuum drying R22 Flare tool Flare machining of pipes O Usable if dimensions are adjusted Bender Bending pipes R22 Refrigerant recovery equipment Refrigerant recovery A For R410A only Torque wrench Tightening flare nuts Z Exclusive for 012 7 mm and 015 9 mm Pipe cutter Cutting pipes R22 Welding machine and nitrogen cylinder Welding pipes R22 Refrigerant charging measure Charging refrigerant
111. d of trouble such as when an error display has appeared there is a smell of burning abnormal sounds are heard the air conditioner fails to cool or heat or water is leaking has occurred in the air conditioner do not touch the air conditioner yourself but set the circuit breaker to the OFF position and contact a qualified service person Take steps to ensure that the power will not be turned on by marking out of service near the circuit breaker for instance until qualified service person arrives Continuing to use the air conditioner in the trouble status may cause mechanical problems to escalate or result in electric shocks etc After the work has finished be sure to use an insulation tester set 500 V Megger to check the resistance is 1 MQ or more between the charge section and the non charge metal section Earth section If the resistance value is low a disaster such as a leak or electric shock is caused at user s side Upon completion of the installation work check for refrigerant leaks and check the insulation resistance and water drainage Then conduct a test run to check that the air conditioner is operating properly After the installation work confirm that refrigerant gas does not leak If refrigerant gas leaks into the room and flows near a fire source such as a cooking range noxious gas may be generated Explanations given to user Upon completion of the installation work tell the user where the circuit breaker is
112. des Ger ts Dies kann zu Verletzungen f hren CAUTION BURST HAZARD Open the service valves before the operation otherwise there might be the burst VORSICHT EXPLOSIONSGEFAHR ffnen Sie vor dem Arbeitsgang die Versorgungsventile da es anderenfalls zu einer Explosion kommen kann 1115150101_EN indd 9 1 Sicherheitshinweise Der Hersteller haftet nicht f r Sch den die durch ein Missachten der in diesem Handbuch enthaltenen Hinweise verursacht werden ZN WARNUNG Allgemeines Bevor Sie mit der Installation der Klimaanlage beginnen lesen Sie das Installationshandbuch sorgf ltig durch und befolgen Sie dessen Anweisungen zum Installieren der Klimaanlage Nur ein qualifizierter Installateur 1 oder ein qualifizierter Servicetechniker 1 darf die Klimaanlage installieren Bei Installation der Klimaanlage durch einen nicht daf r qualifizierten Benutzer kann es zu Br nden elektrischen Schl gen Verletzungen Wasseraustritten Ger uschen und oder Vibrationen kommen Verwenden Sie ausschlie lich ein K ltemittel dass f r die Verwendung zum Nachf llen oder Austausch angegeben ist Anderenfalls kann ein berm iger Druck im K ltemittelkreislauf entstehen was zu einem Ger teausfall oder einer Explosion oder zu Verletzungen f hren kann Verwenden Sie f r den Transport des Klimager ts einen Gabelstapler und bewegen Sie das Klimager t beim Umstellen mit mindestens 2 Personen Bevor Sie das Ein
113. des fuites d eau des parasites et ou des vibrations peuvent en r sulter N utilisez pas un fluide frigorigene diff rent de celui sp cifi pour le compl ment ou le remplacement Faute de quoi une pression anormalement lev e risque d tre g n r e dans le circuit de r frig ration ce qui peut entrainer une panne ou une explosion du produit ou vous pouvez vous blesser Pour transporter les climatiseur utilisez un chariot l vateur et pour le d placer la main faites le avec au moins 2 personnes Avant d ouvrir la grille d entr e d air de l unit int rieure ou le cache de vanne l unit ext rieure r glez le coupe circuit sur la position OFF Ne pas r gler le disjoncteur sur la position OFF peut entra ner une lectrocution par le biais d un contact avec les pi ces int rieures Seul un installateur qualifi 1 ou une personne d entretien qualifi e 1 est autoris enlever la grille d entr e d air de l unit int rieure ou la cache de vanne de l unit ext rieure et effectuer le travail requis Avant de proc der l installation l entretien la r paration ou la d pose veuillez r gler le coupe circuit en position OFF Dans le cas contraire cela peut entrainer une lectrocution Placez un panneau indicateur Travail en cours proximit du disjoncteur pendant l installation l entretien la r paration ou la d pose Un danger d lectrocution est possible si le disjoncteur est r gl
114. e LED displays are placed in their initial status If not place them in the initial status 2 Hold down SWO1 for at least 5 seconds and check that D804 flashes slowly Fig 9 3 Press SW01 four times to set the LED displays D800 to D805 to the LED displays for existing piping settings shown below If the setting is enabled D802 lights and D804 and D805 flash rapidly Fig 10 4 Hold down SW01 SWO2 simultaneously for at least 5 seconds to return the LED displays to the initial status Fig 9 Fig 10 LED displays indicated when step 3 is taken LED displays for existing piping settings D800 D801 D802 D803 D804 D805 D800 D801 D802 D803 D804 D805 O e e e o e e e O e O ON OFF Slow flashing O ON OFF Rapid flashing When restoring the factory defaults To restore the factory defaults in situations such as when relocating the units follow the steps below 1 Check that the LED displays are placed in their initial status If not place them in the initial status 2 Hold down SWO1 for at least 5 seconds and check that D804 flashes slowly Fig 11 3 Press SWO1 14 times to set the LED displays D800 to D805 to the LED displays restored to factory defaults shown below Fig 12 Fig 11 Fig 12 LED displays indicated when step 2 is taken LED displays restored to factory defaults D800 D801 D802 D803 D804 D805 D800 D801 D802 D803 D8
115. elhos de ar condicionado fabricados pela Toshiba Carrier Corporation ou alternativamente recebeu instru es relacionadas com estas operag es de pessoas que tiveram formag o e por conseguinte tem conhecimentos relacionados com estas opera es O tecnico de assist ncia qualificado e autorizado para efectuar o trabalho electrico envolvido na instala o repara o mudanga e eliminagao tem as qualificac es adequadas para este trabalho el ctrico conforme estipulado pelos regulamentos e as leis locais e uma pessoa que teve formag o relacionada com o trabalho el ctrico dos aparelhos de ar condicionado fabricados pela Toshiba Carrier Corporation ou alternativamente recebeu instru es relacionadas com estas opera es de M pessoas que tiveram formag o e por conseguinte tem conhecimentos relacionados com estas T cnico de opera es assist ncia e qualificado O t cnico de assist ncia qualificado e autorizado para efectuar os trabalhos de instalag o de tubagens e manuseamento do refrigerante envolvidos na instalagao reparac o mudanga e eliminag o tem as qualificag es adequadas para o trabalho de instalag o das tubagens e o manuseamento do refrigerante conforme estipulado pelos regulamentos e as leis locais e uma pessoa que teve a formag o relacionada com o trabalho de instalac o de tubagens e manuseamento do refrigerante dos aparelhos de ar condicionado fabricados pela Toshiba Carrier Corporation ou al
116. elle genannten Spezialarbeiten ausf hren Wenn Sie nicht die geeignete Schutzkleidung tragen setzen Sie sich erh hten Gefahren aus da Sie sich eher Allgemeine Bezeichnung Klimaanlage Verletzungen Verbrennungen Stromschl ge u a zuziehen Arbeitsaufgabe Zu tragende Schutzkleidung Definition der Bezeichnungen Qualifizierter Installateur oder Qualifizierter Servicetechniker 2 x E Alle Arten von Schutzhandschuhe Die Klimaanlage muss von einem qualifizierten Installateur oder einem qualifizierten Servicetechniker installiert Arbeiten Arbeitsschutzbekleidung gewartet repariert und entsorgt werden Wenn eine dieser Aufgaben erledigt werden muss bitten Sie einen S E E E pi Schutzhandschuhe f r Elektriker qualifizierten Installateur oder einen qualifizierten Servicetechniker diese f r Sie auszuf hren Elektroarbeiten Isolierendes Schuhwerk Ein qualifizierter Installateur oder ein qualifizierter Servicetechniker ist ein Auftragnehmer der ber die Kleidung zum Schutz vor Stromschl gen Qualifikationen und das Fachwissen verf gt welche in der untenstehenden Tabelle genannt sind Arbeiter in aer Hang Industrie Schutzhelme Auftragnehmer Qualifikationen und Fachwissen ber welche der Auftragnehmer verf gen muss Transport schwerer Gegenst nde Schuhe mit Zehenschutzkappen Der qualifizierte Installateur ist ein Auftragnehmer der die von der Toshiba Carrie
117. emittelkonzentration auch bei K ltemittelaustritt den Sicherheitsgrenzwert nicht berschreitet Wenden Sie sich bei Fragen zur Umsetzung der Ma nahmen an den H ndler bei dem Sie die Klimaanlage gekauft haben Durch Ansammlung von hochkonzentriertem K ltemittel kann es zu einem Unfall durch Sauerstoffmangel kommen Installieren Sie die Klimaanlage nicht an Orten an denen die Gefahr besteht dass sie brennbaren Gasen ausgesetzt ist Wenn das brennbare Gas ausstr mt und sich im Bereich des Ger ts sammelt kann es sich entz nden Tragen Sie beim Transportieren der Klimaanlage Schuhe mit Zehenschutzkappen Halten Sie die Klimaanlage beim Tragen nicht an den B ndern des Verpackungskartons fest Anderenfalls k nnen Sie sich verletzen wenn die B nder rei en Stellen Sie keine Verbrennungsvorrichtung an Orten auf wo sie direkt dem Wind der Klimaanlage ausgesetzt ist da anderenfalls eine unvollst ndige Verbrennung die Folge ist 18 DE 8 24 13 9 40 AM Installation Montieren Sie die Klimaanlage an einem Ort an dem der Boden das Gewicht des Ger ts tragen kann Anderenfalls kann das Ger t herunterfallen und Verletzungen verursachen Installieren Sie die Klimaanlage entsprechend den Anweisungen im Installationshandbuch Bei Missachtung dieser Anweisungen kann das Ger t herunterfallen umkippen oder Ger usche Vibrationen Wasseraustritt usw verursachen Die angegebenen Schrauben M10 und Muttern M10 zum Befestigen des Au enger
118. en Moving parts Do not operate unit with grille removed Stop the unit before the servicing AVERTISSEMENT Pi ces mobiles Ne faites pas fonctionner l unit avec la grille d pos e Arr tez l unit avant l entretien CAUTION High temperature parts You might get burned when removing this panel ATTENTION Pi ces haute temp rature Vous pourriez vous br ler en d posant ce panneau CAUTION Do not touch the aluminum fins of the unit Doing so may result in injury ATTENTION Ne touchez pas les ailettes en aluminium de l unit Vous pourriez vous blesser CAUTION BURST HAZARD Open the service valves before the operation otherwise there might be the burst ATTENTION RISQUE D EXPLOSION Ouvrez les soupapes de service avant l op ration sinon un clatement pourrait se produire 1115150101 EN indd 6 7 Pr cautions relatives la s curit Le fabricant n assume aucune responsabilit quant aux dommages caus s par le non respect de la description de ce manuel NAVERTISSEMENT G n ralit s Avant d installer le climatiseur lisez attentivement le Manuel d installation et suivez les instructions pour installer le climatiseur Seul un installateur qualifi 1 ou une personne d entretien qualifi e 1 est autoris installer le climatiseur Si le climatiseur est install par une personne non qualifi e un incendie un choc lectrique des blessures
119. en elektrische Schl ge oder Br nde verursachen 10 8 24 13 9 40 AM Grazie per aver acquistato questo condizionatore d aria Toshiba Leggere attentamente queste istruzioni che contengono informazioni importanti di conformita con la Direttiva Macchine Direttiva 2006 42 CE ed assicurarsi di averle comprese termine della lettura delle presenti istruzioni assicurarsi di conservarle in un luogo sicuro insieme al Manuale del proprietario e al Manuale di installazione in dotazione con il prodotto Denominazione generica Condizionatore d aria Definizione di installatore qualificato o tecnico dell assistenza qualificato Il condizionatore d aria deve essere installato sottoposto a manutenzione riparato e rimosso da un installatore qualificato o da un tecnico dell assistenza qualificato Quando deve essere eseguito uno di questi lavori rivolgersi a un installatore qualificato o a un tecnico dell assistenza qualificato per svolgerli in propria vece Un installatore qualificato un tecnico dell assistenza qualificato un agente che dispone delle qualifiche e dell esperienza descritti nella tabella seguente Agente Qualifiche ed esperienza di cui deve disporre l agente L installatore qualificato una persona che installa sottopone a manutenzione trasferisce e rimuove i condizionatori d aria prodotti da Toshiba Carrier Corporation Questa persona amp stata addestrata a installare sottoporre
120. ereiste elektrische ingrepen te verrichten voor de installatie het verplaatsen en het wegdoen beschikt over de bevoegdheden voor dit elektrici nswerk zoals vastgelegd in de plaatselijke wetten en voorschriften en hij of zij is opgeleid voor elektrici nswerk aan de airconditioners vervaardigd door de Toshiba Carrier Corporation of anders is hij of zij ge nstrueerd in dergelijke ingrepen door een persoon of personen die daarvoor zijn opgeleid en beschikt als zodanig over alle vereiste kennis voor deze ingrepen De bevoegd installateur die kan worden toegestaan de vereiste koelmiddelwerkzaamheden en buizenaanleg te verrichten voor de installatie het verplaatsen en het wegdoen beschikt over de bevoegdheden voor buizenaanleg en koelmiddelwerk zoals vastgelegd in de plaatselijke wetten en voorschriften en hij of zij is opgeleid voor buizenaanleg en koelmiddelwerk aan de airconditioners vervaardigd door de Toshiba Carrier Corporation of anders is hij of zij ge nstrueerd in dergelijke ingrepen door een persoon of personen die daarvoor zijn opgeleid en beschikt als zodanig over alle vereiste kennis voor deze ingrepen De bevoegd installateur die kan worden toegestaan op hoge installatieplaatsen te werken is opgeleid inzake het werken op hoge installatieplaatsen aan de airconditioners vervaardigd door de Toshiba Carrier Corporation of anders is hij of zij ge nstrueerd in dergelijke ingrepen door een persoon of personen die daarvoor zijn opgeleid en be
121. erplaatst moet worden Voordat u het inlaatrooster van de binneneenheid of de klepafdekking van de buiteneenheid opent moet u eerst de stroomonderbreker in de OFF stand UIT zetten Als u verzuimt de stroomonderbreker in de OFF stand UIT te zetten loopt u gevaar van elektrische schokken bij het aanraken van de interne onderdelen Alleen een bevoegd installateur 1 of een bevoegd onderhoudsmonteur 1 mag het inlaatrooster van de binneneenheid of de klepafdekking van de buiteneenheid verwijderen en het vereiste werk verrichten Alvorens u begint met installeren onderhoud reparaties of werk voor afdanken van het apparaat zet u eerst de stroomonderbreker in de OFF stand Anders loopt u gevaar elektrische schokken te krijgen Plaats een bordje werk in uitvoering bij de stroomonderbreker tijdens het installeren het onderhoud het reparatiewerk of werk voor het verwijderen van het apparaat Als iemand per vergissing de stroomonderbreker in de positie AAN zet loopt u gevaar een elektrische schok te krijgen Alleen een bevoegd installateur 1 of een bevoegd onderhoudsmonteur 1 mag werkzaamheden op hoogte verrichten met een trapje van 50 cm of hoger Draag tijdens het installeren onderhouden en verwijderen van het apparaat altijd beschermende handschoenen en veiligheidskleding de aluminium koelvinnen van de buiteneenheid niet aan Anders zou u zich eraan kunnen bezeren Als het nodig is de koelvin aan te raken tre
122. es pi ces et d autres objets risquent de tomber pouvant blesser toute personne se trouvant en dessous Le fluide frigorigene utilis par ce climatiseur est le RA10A Nous garantirons que le climatiseur est transport dans de conditions stables Ne modifiez pas les pi ces De m me ne d montez pas ou ne modifiez pas les pi ces Cela pourrait provoquer un incendie un choc lectrique ou des blessures S lection du lieu d installation Si vous installez l unit dans une petite pi ce prenez les mesures n cessaires pour viter que le fluide frigorig ne ne d passe la concentration limite m me en cas de fuite Consultez le revendeur chez qui vous avez acquis le climatiseur au moment de mettre en pratique ces mesures Une accumulation de fluide frigorig ne haute concentration est susceptible de provoquer une insuffisance d oxyg ne N installez pas le climatiseur dans un endroit qui peut tre soumis un risque de gaz combustible En pr sence de fuites de gaz combustible ou d une accumulation de celui ci autour de l unit un incendie peut survenir Lors du transport du climatiseur portez des chaussures coquilles de protection suppl mentaires Lors du transport du climatiseur n agrippez pas les bandes du carton d emballage Vous risquez de vous blesser si les bandes se brisent Ne placez aucun appareil combustion dans un endroit expos directement au souffle du climatiseur faute de quoi sa combustion risque
123. eschermende kleding Werkhandschoenen Alle soorten werk Veiligheidswerkkleding Handschoenen die bescherming bieden tegen elektriciteit Isolerende schoenen Kleding die bescherming biedt tegen elektrische schokken Elektrische werkzaamheden Werk uitgevoerd op hoogte 50 cm of meer Veiligheidshelm voor industrieel gebruik Vervoer van zware voorwerpen Schoenen met stalen neuzen Reparatie van buiteneenheden Handschoenen die bescherming bieden tegen elektriciteit 8 24 13 9 40 AM 40 NL 41 NL Waarschuwingsaanduidingen op de airconditioner Waarschuwingsaanduiding Beschrijving ELECTRICAL SHOCK HAZARD Disconnect all remote electric power supplies before servicing WAARSCHUWING GEVAAR VOOR ELEKTRISCHE SCHOK Verbreek alle externe stroomvoorzieningsaansluitingen alvorens enig onderhoud te verrichten Moving parts Do not operate unit with grille removed Stop the unit before the servicing WAARSCHUWING Bewegende delen Schakel het apparaat niet in wanneer het voorrooster is verwijderd Stop de werking van de unit alvorens enig onderhoud te verrichten CAUTION High temperature parts You might get burned when removing this panel LET OP Hete onderdelen Bij het verwijderen van dit paneel is bestaan de kans dat u zich brandt CAUTION Do not touch the aluminum fins of the unit Doing so may result in injury LET OP De aluminium vinnen
124. fore the servicing WARNING Moving parts Do not operate unit with grille removed Stop the unit before the servicing CAUTION High temperature parts You might get burned when removing this panel CAUTION High temperature parts You might get burned when removing this panel CAUTION Do not touch the aluminum fins of the unit Doing so may result in injury CAUTION Do not touch the aluminium fins of the unit Doing so may result in injury CAUTION BURST HAZARD Open the service valves before the operation otherwise there might be the burst CAUTION BURST HAZARD Open the service valves before the operation otherwise there might be the burst 1115150101 EN indd 3 1 Precautions for safety The manufacturer shall not assume any liability for the damage caused by not observing the description of this manual N WARNING General Before starting to install the air conditioner read carefully through the Installation Manual and follow its instructions to install the air conditioner Only a qualified installer 1 or qualified service person 1 is allowed to install the air conditioner If the air conditioner is installed by an unqualified individual a fire electric shocks injury water leakage noise and or vibration may result Do not use any refrigerant different from the one specified for complement or replacement Otherwise abnormally high pressure may be generated i
125. ghly acquainted with the knowledge related to this work 1115150101_EN indd 2 Definition of Protective Gear When the air conditioner is to be transported installed maintained repaired or removed wear protective gloves and safety work clothing In addition to such normal protective gear wear the protective gear described below when undertaking the special work detailed in the table below Failure to wear the proper protective gear is dangerous because you will be more susceptible to injury burns electric shocks and other injuries Work undertaken Protective gear worn All types of work Protective gloves Safety working clothing Electrical related work Gloves to provide protection for electricians Insulating shoes Clothing to provide protection from electric shock Work done at heights 50 cm or more Helmets for use in industry Transportation of heavy objects Shoes with additional protective toe cap Repair of outdoor unit Gloves to provide protection for electricians 4 EN 8 24 13 9 40 AM 5 EN E Warning indications on the air conditioner unit Warning indication Description ELECTRICAL SHOCK HAZARD Disconnect all remote electric power supplies before servicing WARNING ELECTRICAL SHOCK HAZARD Disconnect all remote electric power supplies before servicing Moving parts Do not operate unit with grille removed Stop the unit be
126. gloves and safety work clothing and then proceed Do not climb onto or place objects on top of the outdoor unit You may fall or the objects may fall off of the outdoor unit and result in injury When working at heights use a ladder which complies with the ISO 14122 standard and follow the procedure in the ladder s instructions Also wear a helmet for use in industry as protective gear to undertake the work When cleaning the filter or other parts of the outdoor unit set the circuit breaker to OFF without fail and place a Work in progress sign near the circuit breaker before proceeding with the work When working at heights put a sign in place so that no one will approach the work location before proceeding with the work Parts and other objects may fall from above possibly injuring a person below The refrigerant used by this air conditioner is the R410A You shall ensure that the air conditioner is transported in stable condition Do not modify the products Do not also disassemble or modify the parts It may cause a fire electric shock or injury Selection of installation location If you install the unit in a small room take appropriate measures to prevent the refrigerant from exceeding the limit concentration even if it leaks Consult the dealer from whom you purchased the air conditioner when you implement the measures Accumulation of highly concentrated refrigerant may cause an oxygen deficiency accident Do n
127. ha ricevuto istruzioni relative a tali argomenti da parte di uno o pi individui che sono stati addestrati e pertanto ha piena dimestichezza con le nozioni relative a tale lavoro 1115150101 EN indd 11 11 Definizione di attrezzatura protettiva Quando necessario trasportare installare sottoporre a manutenzione riparare o rimuovere il condizionatore d aria indossare guanti di protezione e indumenti da lavoro di sicurezza Oltre alla normale attrezzatura protettiva indossare l attrezzatura protettiva descritta di seguito quando si intraprendono i lavori speciali descritti in dettaglio nella tabella seguente Qualora non si indossi l attrezzatura protettiva appropriata si corre un pericolo in quanto si sara pi suscettibili a lesioni personali ustioni scosse elettriche e altri infortuni Lavoro intrapreso Attrezzatura protettiva indossata Tutti i tipi di lavori Guanti protettivi Indumenti da lavoro di sicurezza Lavoro su impianti elettrici Guanti di protezione per elettricisti Calzature isolanti Indumenti per fornire protezione da scosse elettriche Lavori in altezza 50 cm o pi Elmetti per uso industriale Trasporto di oggetti pesanti Scarpe con calotte protettive aggiuntive per le dita Riparazione dell unit esterna Guanti di protezione per elettricisti 22 IT 8 24 13 9 40 AM 23 IT Indicazioni di avvertimento sul condizionatore d aria
128. houden Elders opstellen Alleen een bevoegd installateur 1 of een bevoegd onderhoudsmonteur 1 mag de airconditioner verplaatsen Het is gevaarlijk als een onbevoegde de airconditioner verplaatst aangezien dat kan leiden tot gevaar voor brand elektrische schokken verwondingen waterlekkage bijgeluiden en of trillingen Bij uitvoeren van werkzaamheden wanneer de pomp gestopt is schakelt u eerst de compressor uit voordat u de koelmiddelbuis losmaakt Bij losmaken van de koelmiddelbuis terwijl de onderhoudsklep open staat en de compressor nog werkt zuigt de compressor lucht aan en ontstaat er overdruk in het koelsysteem hetgeen eventueel kan leiden tot verwondingen enz 1 Zie Definitie van bevoegd installateur of bevoegd onderhoudsmonteur NLET OP Installatie van een airconditioner met nieuw type koelmiddel Deze airconditioner werkt met het nieuwe HFC koelmiddel R410A dat de ozonlaag niet aantast Het koelmiddel R410A is gevoeliger voor onzuiverheden zoals water een oxidelaag op het membraan en olie omdat de werkdruk van het koelmiddel R410A ongeveer 1 6 maal zo hoog is als voor koelmiddel R22 Samen met het nieuwe koelmiddel is ook de koelolie door een nieuw type vervangen Daarom is het bij het installatiewerk belangrijk dat er geen water stof oud koelmiddel of oude koelolie in het koelsysteem van de airconditioner met het nieuw koelmiddel R410A terecht kan komen Om vermenging met een verkeerd koelmiddel en verkeerde k
129. i e Si vous appliquez un couple excessif l crou risque apr s un certain temps de se casser et de provoquer une fuite de fluide frigorig ne Lorsque le climatiseur a t install ou d plac suivez les instructions du Manuel d installation et purgez la totalit de l air de sorte qu aucun gaz autre que le fluide frigorig ne ne soit m lang dans le circuit de r frig ration Ne pas purger compl tement l air peut entrainer un dysfonctionnement du climatiseur De l azote gazeux doit tre utilis pour le test d tanch it l air Letuyau de remplissage doit tre raccord de telle mani re qu il ne soit pas l che Raccordement lectrique Seul un installateur qualifi 1 ou une personne d entretien qualifi e 1 est autoris r aliser le travail lectrique sur le climatiseur En aucun cas ce travail doit tre effectu par une personne non qualifi e tant donn que si le travail n est pas correctement effectu des chocs lectriques et ou des fuites lectriques peuvent survenir L appareil doit tre install conform ment aux r glementations de c blage nationales Un manque de puissance du circuit d alimentation ou une installation incompl te peut provoquer une d charge lectrique ou un incendie Utilisez un c blage respectant les sp cifications du Manuel d installation et les dispositions des r glementations et de la l gislation locales L utilisation d un c blage n tant pas conforme aux sp
130. iene las cualificaciones correspondientes a este trabajo de manejo del refrigerante y de los tubos seg n lo estipulan las leyes y las normas locales y l o ella es una persona que ha sido formada en temas relacionados con el trabajo de manejo del refrigerante y de los tubos de los aparatos de aire acondicionado fabricados por Toshiba Carrier Corporation o en otro caso l o ella han recibido instrucciones para realizar tales trabajos de un individuo o individuos ya formados y que por lo tanto tienen un conocimiento extenso relacionado con este trabajo El instalador cualificado con permiso para trabajar en lugares altos ha sido formado en temas relacionados con el trabajo en lugares altos con aparatos de aire acondicionado fabricados por Toshiba Carrier Corporation o en otro caso l o ella han recibido instrucciones para realizar tales rabajos de un individuo o individuos ya formados y que por lo tanto tienen un conocimiento extenso relacionado con este trabajo Instalador cualificado La persona de mantenimiento cualificada es una persona que instala repara mantiene recoloca y se deshace de los aparatos de aire acondicionado fabricados por Toshiba Carrier Corporation El o ella han sido formados para instalar reparar mantener recolocar y deshacerse de los aparatos de aire acondicionado fabricados por Toshiba Carrier Corporation o en otro caso han recibido instrucciones para realizar tales operaciones de un individuo o individ
131. igualmente alterado Assim durante a instala o certifique se de que impede a entrada de gua p refrigerante ou leo de refrigera o antigo no ciclo do aparelho de ar condicionado R410A de novo refrigerante Para evitar a mistura de refrigerante ou leo de refrigera o os tamanhos das zonas de liga o da porta de coloca o da unidade principal e as ferramentas de instala o foram alterados em compara o aos aplic veis s unidades de refrigerante convencional Assim tem de utilizar as ferramentas especiais para as unidades de novo refrigerante R410A Para os tubos de liga o utilize tubagens novas e limpas com encaixes de alta press o exclusivos para o R410A para impedir a entrada de gua e ou p Para desligar o aparelho do fornecimento de energia principal Este aparelho deve ser conectado ao fornecimento de energia principal atrav s dum interruptor com uma separa o de contacto de pelo menos 3 mm Deve utilizar um fus vel de instala o qualquer tipo pode ser utilizado para a linha de fornecimento de energia deste aparelho de ar condicionado N o lave os aparelhos de ar condicionado com m quinas de lavar a press o Fugas el ctricas podem provocar choques el ctricos ou inc ndios 8 24 13 9 40 AM 38 PT 39 NL Hartelijk dank voor uw aankoop van deze Toshiba airconditioner Lees deze instructies aandachtig door want ze bevatten belangrijke informatie overeenkomstig de vereisten van de Mach
132. in una sede che possa essere soggetta al rischio di esposizione a gas combustibili Qualora si verifichi una perdita e la concentrazione di un gas combustibile in prossimit dell apparecchio sussiste il rischio di incendio Quando si trasporta il condizionatore d aria indossare scarpe con calotte protettive aggiuntive per le dita Quando si trasporta il condizionatore d aria non afferrare le fascette che circondano la scatola di imballaggio Qualora le fascette si rompano si potrebbero subire lesioni personali Non collocare apparecchi a combustione di alcun genere in luoghi che siano direttamente esposti al flusso d aria prodotto dal condizionatore d aria in caso contrario il condizionatore potrebbe provocare una combustione imperfetta 24 IT 8 24 13 9 40 AM Installazione Installare il condizionatore d aria in sedi che offrano una resistenza sufficiente a sostenere il peso dell unit Qualora la resistenza non sia sufficiente l unit potrebbe cadere e provocare lesioni personali Attenersi alle istruzioni nel Manuale di installazione per installare il condizionatore d aria La mancata osservanza di queste istruzioni potrebbe provocare la caduta o il rovesciamento del prodotto oppure produrre rumori vibrazioni perdite d acqua e cosi via necessario utilizzare i bulloni M10 e i dadi M10 specificati per fissare l unit esterna quando si installa quest ultima Installare l unit esterna correttamente in una
133. inerichtlijn Richtliin 2006 42 EG en zorg dat u alles volledig begrijpt Na het doorlezen van deze instructies dient u ze te bewaren op een veilige plaats samen met de eigenaarshandleiding en de installatiehandleiding die bij uw product zijn geleverd Algemene benaming Airconditioner Definitie van bevoegd installateur of bevoegd onderhoudsmonteur De airconditioner moet worden geinstalleerd onderhouden gerepareerd en uiteindelijk weggedaan door een bevoegd installateur of bevoegd onderhoudsmonteur Wanneer een van deze taken verricht moet worden verzoekt u dan een bevoegd installateur of bevoegd onderhoudsmonteur om dit voor u te doen Een bevoegd installateur of bevoegd onderhoudsmonteur is een persoon die beschikt over de kennis en bevoegdheden die staan vermeld in de onderstaande tabel Persoon Kennis en bevoegdheden waarover de persoon moet beschikken Een bevoegd installateur is een persoon die zorgt voor de installatie het onderhoud het verplaatsen en wegdoen van de airconditioners vervaardigd door de Toshiba Carrier Corporation Hij of zij is opgeleid voor de installatie het onderhoud het verplaatsen en wegdoen van de airconditioners vervaardigd door de Toshiba Carrier Corporation of anders is hij of zij ge nstrueerd in dergelijke ingrepen door een persoon of personen die daarvoor zijn opgeleid en beschikt als zodanig over alle vereiste kennis voor deze ingrepen De bevoegd installateur die kan worden toegestaan de v
134. inn Schutzhandschuhe und Arbeitsschutzbekleidung an Klettern Sie nicht auf das Au enger t und stellen Sie keine Gegenst nde darauf ab Anderenfalls k nnen Sie abst rzen oder Gegenst nde k nnen herunterfallen In beiden F llen besteht Verletzungsgefahr Wenn Sie Arbeiten in der H he ausf hren verwenden Sie eine Leiter gem ISO Norm 14122 und befolgen Sie das in der Anleitung der Leiter aufgef hrte Verfahren Tragen Sie als Schutzkleidung beim Ausf hren der Arbeiten au erdem einen Industrie Schutzhelm Bevor Sie den Filter oder andere Teile des Au enger ts reinigen stellen Sie unbedingt den Schutzschalter auf OFF aus und befestigen Sie ein Schild Arbeiten in Ausf hrung neben dem Schutzschalter bevor Sie die Arbeiten ausf hren Bevor Sie Arbeiten in der H he ausf hren stellen Sie ein Warnschild auf damit sich niemand dem Arbeitsbereich n hert Teile und andere Gegenst nde k nnen von oben herunterfallen und u U unten befindliche Personen verletzen Diese Klimaanlage verwendet das K ltemittel R410A Sie m ssen sicherstellen dass die Klimaanlage unter stabilen Bedingungen transportiert wird Nehmen Sie keine Ver nderungen an den Produkten vor Ver ndern oder bauen Sie keine Teile auseinander Dies kann zu Br nden Stromschl gen oder Verletzungen f hren Auswahl des Installationsortes Wenn Sie die Anlage in einem kleinen Raum installieren ergreifen Sie angemessene Vorsichtsma nahmen damit die K lt
135. ionador de ar quando implementar as medidas A acumulag o de refrigerante altamente concentrado pode provocar um acidente devido a falta de oxig nio N o instale o aparelho de ar condicionado num local sujeito a um risco de expira o de um g s combust vel Se ocorrer uma fuga de um g s combust vel que se concentre volta da unidade pode ocorrer um inc ndio Quando transportar o aparelho de ar condicionado utilize sapatos com protec es adicionais para os dedos dos p s Quando transportar o aparelho de ar condicionado n o segure nas faixas existentes volta da embalagem de cart o Pode ferir se se as faixas se partirem N o coloque nenhum aparelho de combust o num local exposto directamente ao vento do aparelho de ar condicionado caso contr rio pode provocar uma combust o imperfeita 35 PT 36 PT 18 1115150101 EN indd 18 8 24 13 9 40 AM Instalag o Instale o aparelho de ar condicionado em locais suficientemente fortes para suportar o peso da unidade Se a for a n o for suficiente a unidade pode cair e provocar les es Siga as instru es fornecidas no Manual de Instala o para instalar o aparelho de ar condicionado O incumprimento destas instru es pode provocar a queda do produto ou originar ru do vibra o fuga de gua etc Deve utilizar os parafusos M10 e as porcas M10 especificados para fixar a unidade exterior quando instalar a unidade Instale a unidade exterior num l
136. is tussen het stroomvoerende deel en het niet stroomvoerende metalen deel aardingsdeel Als de weerstandswaarde te klein is loopt de gebruiker gevaar van kortsluiting lekstromen en elektrische schokken Na voltooiing van het installatiewerk controleert u of er geen koelmiddel lekt of de waterafvoer in orde is en controleert u de weerstand van de isolatie Vervolgens laat u de airconditioner proefdraaien om te zien of het apparaat goed werkt 43 NL 1115150101 EN indd 22 22 Controleer na het installeren dat er geen koelmiddel lekt Wanneer ontsnapt gasvormig koelmiddel in de buurt of in contact komt met open vuur zoals bij een gasfornuis kunnen giftige gassen worden gevormd Uitleg aan de gebruiker Na voltooiing van het installatiewerk vertelt u de gebruiker waar de stroomonderbreker zich bevindt Als de gebruiker niet weet waar de stroomonderbreker zit kan hij of zij de airconditioner niet uitschakelen wanneer er zich een storing voordoet in de werking Als u bemerkt dat het ventilatierooster is beschadigd moet u uit de buurt blijven van de buitenunit de stroomonderbreker op de OFF stand UIT zetten en moet u contact opnemen met bevoegd onderhoudspersoneel 1 om de reparatie uit te voeren Zet de stroomonderbreker niet terug in de ON stand AAN totdat alle vereiste reparaties zijn voltooid Na voltooiing van het installatiewerk vertelt u aan de hand van de handleiding de gebruiker hoe het apparaat te bedienen en te onder
137. kt u eerst werkhandschoenen en beschermende kleding aan en begint u dan pas met het werk Plaats nooit voorwerpen op de buiteneenheid en klim er niet bovenop U zou er af kunnen vallen of een voorwerp kan van de buiteneenheid af vallen en letsel veroorzaken Gebruik voor het werken op hoogte een ladder die voldoet aan norm ISO 14122 en volg de aanwijzingen in de handleiding van de ladder Draag tevens een helm voor industrieel gebruik ter bescherming voordat u aan het werk gaat Voor u het filter of andere onderdelen van de buitenunit gaat schoonmaken moet u altijd eerst de stroomonderbreker in de OFF stand UIT zetten en moet u een bordje Werk in uitvoering bij de stroomonderbreker plaatsen voordat u aan het werk gaat Bij het werken op hoogte dient u voordt u aan het werk gaat een waarschuwingsbord te plaatsen opdat niemand uw werkplek te dicht nadert Anders zouden voorbijgangers gewond kunnen raken door vallende onderdelen en andere voorwerpen Het koelmiddel dat is toegepast in deze airconditioner is RA10A U dient te zorgen dat de warmtewisselingsventilator wordt vervoerd in een stabiele toestand Wijzig niets aan de producten De onderdelen niet uiteen nemen of wijzigen Dat zou namelijk brand elektrische schokken of verwondingen kunnen veroorzaken Keuze van de installatieplaats Als u het apparaat installeert in een kleine kamer dient u maatregelen te treffen om bij lekkage van koelmiddel in elk geval te zorgen dat
138. lassgitter des Innenger tes oder die Ventilabdeckung des Au enger ts ffnen stellen Sie den Schutzschalter auf die Position OFF aus Sollten Sie diesen Hinweis nicht beachten kann es durch Kontakt mit den Innenteilen zu einem Stromschlag kommen Nur ein qualifizierter Installateur 1 oder ein qualifizierter Servicetechniker 1 darf das Einlassgitter des Innenger ts oder die Ventilabdeckung des Au enger ts entfernen und die erforderlichen Arbeiten ausf hren Bevor Installations Wartungs Reparatur oder Entsorgungsarbeiten ausgef hrt werden stellen Sie unbedingt den Schutzschalter auf die Position OFF aus Anderenfalls kann es zu Stromschl gen kommen Bringen Sie einen Hinweis Arbeiten am System nicht einschalten neben dem Schutzschalter an w hrend die Installations Wartungs Reparatur oder Ausbauarbeiten ausgef hrt werden Es besteht die Gefahr von Stromschl gen wenn der Schutzschalter f lschlicherweise auf ON ein gestellt wird Nur ein qualifizierter Installateur 1 oder ein qualifizierter Servicetechniker 1 darf Arbeiten in der H he unter Verwendung von Trittstufen Leitern usw mit einer H he von 50 cm oder mehr ausf hren Tragen Sie bei der Installation Wartung und Entsorgung Schutzhandschuhe und Arbeitsschutzbekleidung Ber hren Sie nicht die Aluminiumrippen des Au enger ts Anderenfalls k nnen Sie sich verletzen Wenn Sie die Lamellen aus irgendeinem Grund ber hren m ssen ziehen Sie vor Arbeitsbeg
139. lative to the wind direction Strong wind Strong wind When using an air conditioner under low outside temperature conditions Outside temp 5 C or lower in COOL mode prepare a duct or wind shield so that it is not affected by the wind 91 lt Example gt Suction hood Side Discharge hood Discharge Fin 8 Suction Necessary space for installation Unit mm Obstacle at rear side Upper side is free 1 Single unit installation Y gt D 2 Obstacles on both right and left sides Le 150 or more 1 The height of the 2 5 i obstacle should be RE lower than the height of gt the outdoor unit 150 or V 300 or more more 3 Serial installation of two or more units 4 y y Y 9 9 o I D 5 5 o HH gt gt S 50 or 300 or 300 or 300 or more more more more The height of the obstacle should be lower than the height of the outdoor unit Obstacle also above unit 150 gs more V 8 24 13 9 40 AM Obstacle in front Above unit is free 1 Single unit installation U SEI u 500 or more 2 Serial installation of two or more units D Y D Y Y Y 1 000 or more Obstacle also at the above unit WKLLLLLLL un 1 000 or se more 8 2 63 EN 1115150101_EN
140. ll entretenu r par ou mis au rebut portez des gants de protection et des v tements de s curit En plus de cet quipement de protection normal portez les protections d crites ci dessous lorsque vous entreprenez les travaux sp ciaux indiqu s dans le tableau suivant Ne pas porter la tenue de protection ad quate est dangereux car vous serez plus susceptible d tre bless br l de subir une d charge lectrique ou d autres blessures Travaux entrepris quipement de protection port Tous types de travaux Gants de protection V tements de s curit Travaux li s l lectricit Gants pour fournir une protection contre les d charges lectriques Chaussures isolantes V tements pour fournir une protection contre les d charges lectriques Travail effectu en hauteur 50 cm minimum Casques utilis s dans l industrie Transport d objets lourds Chaussures avec des bouts renforc s de protection R paration de l unit ext rieure Gants pour fournir une protection contre les d charges lectriques 10 FR 8 24 13 9 40 AM 11 FR Indications d avertissement relatives au climatiseur Indication d avertissement Description ELECTRICAL SHOCK HAZARD Disconnect all remote electric power supplies before servicing AVERTISSEMENT RISQUE DE DECHARGE ELECTRIQUE D branchez toutes les alimentations lectriques distantes avant l entreti
141. lo un instalador cualificado 1 o una persona de mantenimiento cualificada 1 est n autorizados a retirar la rejilla de admisi n de la unidad interior o el panel de servicio de la unidad exterior y hacer el trabajo necesario Antes de realizar la instalaci n el trabajo de mantenimiento reparaci n o desecho aseg rese de poner el disyuntor en la posici n OFF De lo contrario se pueden producir descargas el ctricas Coloque un aviso que diga Trabajo en curso cerca del disyuntor mientras se realiza el trabajo de instalaci n mantenimiento reparaci n o retirada Si el disyuntor se activa por error existe el peligro de que se produzcan descargas el ctricas Solo un instalador cualificado 1 o una persona de mantenimiento cualificada 1 est n autorizados a realizar trabajos en alturas utilizando un soporte de 50 cm o m s Utilice guantes de protecci n y ropa de trabajo segura durante la instalaci n reparaci n y retirada No toque la aleta de aluminio de la unidad exterior Si lo hace podr a lesionarse Si por alg n motivo tuviera que tocar la aleta p ngase primero guantes de protecci n y ropa de trabajo segura y luego empiece a trabajar No se suba encima de la unidad exterior ni coloque objetos sobre ella Usted o los objetos pueden caerse de la unidad exterior y provocar lesiones Cuando realice trabajos en altura utilice una escalera que cumpla con la norma ISO 14122 y siga las instrucciones de la e
142. low Yellow Yellow Green e O e v O e v O e v O e v O O Rapid Rapid Rapid Rapid Rapid OFF or flashing OFF or flashing OFF or flashing OFF jor flashing OFF or flashing ON 74 EN 8 24 13 9 40 AM 75 EN 111515010 Steps taken to recover the refrigerant 1 Operate the indoor unit in the fan mode 2 Check that the LED displays are placed in their initial status If not place them in the initial status 3 Hold down SW01 for at least 5 seconds and check that D804 flashes slowly Fig 1 4 Press SW01 once to set the LED displays D800 to D805 to the refrigerant recovery LED display shown below Fig 2 Fig 1 Fig 2 LED displays indicated when step 3 is taken Refrigerant recovery LED display D800 D801 D802 D803 D804 D805 D800 D801 D802 D803 D804 D805 O e e e o e O e e e e O ON OFF Slow flashing O ON OFF Rapid flashing 5 Press SWO2 to set D805 to rapid flashing Each time SWO2 is pressed D805 is switched between rapid flashing and OFF Fig 3 6 Hold down SWO2 for at least 5 seconds and when D804 flashes slowly and D805 lights the forced cooling operation is started Max 10 minutes Fig 4 Fig 3 Fig 4 LED displays indicated when step 5 is taken LED displays indicated when step 6 is taken D800 D801 D802 D803 D804 D805 D800 D801 D802 D803 D804 D805 O e e 9 O 9 9 9 o O
143. m es et poss dent par cons quent les connaissances relatives ce travail La personne d entretien qualifi e qui est autoris e manipuler du fluide frigorigene et r aliser un travail de raccordement compris dans installation la r paration le d placement et l enl vement poss de les qualifications n cessaires cette manipulation de fluide frigorig ne et de ce travail de raccordement conform ment aux r glementations et la l gislation locales et il ou elle est une personne qui a t form e pour les probl mes relatifs la manipulation de fluide frigorig ne et de travail de raccordement sur les climatiseurs fabriqu s par Toshiba Carrier Corporation ou alternativement il ou elle a re u des consignes dans de tels domaines par une ou des personnes qui ont t form es et poss dent par cons quent les connaissances relatives ce travail La personne d entretien qualifi e qui est autoris e travailler en hauteur a t form e aux domaines relatifs au travail en hauteur avec les climatiseurs fabriqu s par Toshiba Carrier Corporation ou alternativement il ou elle a re u des consignes dans de tels domaines par un ou des personnes qui ont t form es et poss dent par cons quent toutes les connaissances requises pour ce travail Technicien d entretien qualifi 9 FR 1115150101 EN indd 5 Definition de l quipement de protection Lorsque le climatiseur doit tre transport insta
144. mantenimiento cualificada 1 est n autorizados a recolocar el aparato de aire acondicionado Es peligroso para el aparato de aire acondicionado que sea recolocado por un individuo no cualificado porque se puede producir un incendio descargas el ctricas lesiones fugas de agua ruido y o vibraci n Cuando realice trabajos de bombeo de vac o cierre el compresor antes de desconectar el tubo del refrigerante Si se desconecta el tubo del refrigerante con la v lvula de servicio abierta y con el compresor todav a en funcionamiento se provocar la succi n de aire etc elevando la presi n dentro del ciclo de refrigeraci n hasta un nivel anormalmente alto lo que podr a provocar roturas lesiones etc 1 Consulte la Definici n de instalador cualificado o persona de mantenimiento cualificada N PRECAUCI N Instalaci n del aparato de aire acondicionado con nuevo refrigerante Este aparato de aire acondicionado incorpora el nuevo refrigerante HFC R410A respetuoso con la capa de ozono El refrigerante R410A es apto para ser afectado por impurezas tales como el agua la membrana oxidante y los aceites porque la presi n de trabajo del refrigerante R410A es aproximadamente 1 6 veces mayor que la del refrigerante R22 Adem s de utilizar el nuevo refrigerante tambi n se ha sustituido el aceite refrigerante Por lo tanto durante los trabajos de instalaci n aseg rese de que no entre agua polvo liquido refrigerante del tipo
145. may be generated 6 EN 8 24 13 9 40 AM 7 EN Refrigerant piping Install the refrigerant pipe securely during the installation work before operating the air conditioner If the compressor is operated with the valve open and without refrigerant pipe the compressor sucks air and the refrigeration cycles is over pressurized which may cause a injury Tighten the flare nut with a torque wrench in the specified manner Excessive tighten of the flare nut may cause a crack in the flare nut after a long period which may result in refrigerant leakage When the air conditioner has been installed or relocated follow the instructions in the Installation Manual and purge the air completely so that no gases other than the refrigerant will be mixed in the refrigerating cycle Failure to purge the air completely may cause the air conditioner to malfunction Nitrogen gas must be used for the airtight test The charge hose must be connected in such a way that it is not slack Electrical wiring Only a qualified installer 1 or qualified service person 1 is allowed to carry out the electrical work of the air conditioner Under no circumstances must this work be done by an unqualified individual since failure to carry out the work properly may result in electric shocks and or electrical leaks The appliance shall be installed in accordance with national wiring regulations Capacity shortages of the power circuit or an incomplete installa
146. me as 24 27 as ove above 2 Flare machining size A mm Copper pipe outer 06 4 09 5 012 7 015 9 019 0 A diameter For R410A 9 1 13 2 16 6 19 7 24 0 For R22 9 0 13 0 16 2 19 4 23 3 Becomes a little larger for R410A Do not apply refrigerator oil to the flare surface 8 24 13 9 40 AM 80 EN 16 specifications Sound power level dB Madel Cooling Heating Weight kal RAV SM564ATP E yj id 40 RAV SM564ATJP E i E 40 RAV SM804ATP E 1 id 44 RAV SM804ATJP E h E 44 Under 70 dBA 81 EN 1115150101 EN indd 41 Declaration of conformity Manufacturer TOSHIBA CARRIER THAILAND CO LTD 144 9 Moo 5 Bangkadi Industrial Park Tivanon Road Amphur Muang Pathumthani 12000 Thailand Authorized Nick Ball Representative Toshiba EMEA Engineering Director TCF holder Toshiba Carrier UK Ltd Porsham Close Belliver Industrial Estate PLYMOUTH Devon PL6 7DB United Kingdom Hereby declares that the machinery described below Generic Denomination Air Conditioner Model type RAV SM564ATP E RAV SM564ATJP E RAV SM804ATP E RAV SM804ATJP E Commercial name Digital Inverter Series Air Conditioner Complies with the provisions of the Machinery Directive Directive 2006 42 EC and the regulations transposing into national law Complies with the provisions of the following harmonized standard EN 378 2 2008 A2 2012 NOTE This de
147. ming into Insulate the unsheathed cords conductors with electrical insulation tape Process them so that they do not Earth screw O O System interconnection wire Stripping length power cord and connecting wire Earth wire System interconnection wire 71 EN 1115150101 EN indd 36 Earth wire Power supply wire Power supply wire 36 8 Earthing N WARNING Be sure to connect the earth wire grounding work Incomplete grounding may cause an electric shock Connect the earth wire properly following applicable technical standards Connecting the earth wire is essential to preventing electric shock and to reducing noise and electrical charges on the outdoor unit surface due to the high frequency wave generated by the frequency converter inverter in the outdoor unit If you touch the charged outdoor unit without an earth wire you may experience an electric shock 9 Finishing After the refrigerant pipe inter unit wires and drain pipe have been connected cover them with finishing tape and clamp them to the wall with off the shelf support brackets or their equivalent Keep the power wires and system interconnection wires off the valve on the gas side or pipes that have no heat insulator 10 Test run startup Turn on the leakage breaker at least 12 hours before starting
148. monteur 1 mag elektrische werkzaamheden aan de airconditioner verrichten Onder geen voorwaarde mag dit werk worden verricht door een onbevoegde aangezien fouten of vergissingen kunnen leiden tot elektrische schokken en of kortsluiting of lekstromen Het apparaat moet worden ge nstalleerd overeenkomstig de landelijke regelgeving voor elektra en bedrading Onvoldoende capaciteit van het voedingscircuit of een niet volledige installatie kan een elektrische schok of brand veroorzaken Gebruik bedrading die voldoet aan de specificaties in de installatiehandleiding en de ter plaatse geldende voorschriften en wetten Het gebruik van bedrading die niet voldoet aan de specificaties kan resulteren in elektrische schokken kortsluiting en lekstroom rookontwikkeling en of brandgevaar U moet de aarddraad aansluiten Aarden Onvoldoende aarding kan leiden tot een elektrische schok Sluit de aardleidingen niet aan op gasbuizen waterleidingsbuizen of bliksemafleiders of aardleidingen voor telefoondraden het voltooien van de verplaatsing of het reparatiewerk dient u te controleren of de aardleidingen naar behoren zijn aangesloten Installeer een stroomonderbreker die voldoet aan de specificaties in de installatiehandleiding en de ter plaatse geldende voorschriften en wetten Installeer de stroomonderbreker op een plaats waar die goed toegankelijk is voor de gebruiker Als u de stroomonderbreker buitenshuis aanbrengt gebruik dan een t
149. n elmetto per uso industriale come attrezzatura di protezione per intraprendere il lavoro Quando si intende pulire il filtro o altre parti dell unit esterna accertarsi di aver impostato l interruttore automatico sulla posizione OFF spento e sistemare un cartello con l indicazione Lavori in corso in prossimit dell interruttore automatico prima di iniziare il lavoro Quando si lavora in altezza sistemare un cartello in modo che nessuno si avvicini alla sede dei lavori prima di procedere con i lavori Parti e altri oggetti potrebbero cadere dall alto con la possibilit di provocare lesioni personali a chi si trovi sotto Il refrigerante utilizzato da questo condizionatore d aria l RA10A Accertarsi che il condizionatore d aria venga trasportato in condizioni stabili Non modificare i prodotti Non disassemblare o modificare i componenti Ci potrebbe infatti divenire causa d incendio scosse elettriche o lesioni personali Selezione della sede di installazione Sesiinstalla l unit in una stanza piccola adottare le misure appropriate affinch in caso di perdita di refrigerante la concentrazione di quest ultimo nella stanza non superi il limite consentito Quando si implementano tali misure consultare il rivenditore da cui si acquistato il condizionatore d aria L accumulo di elevate concentrazioni di refrigerante potrebbe provocare un incidente dovuto a carenza di ossigeno Non installare il condizionatore d aria
150. n the refrigeration cycle which may result in a failure or explosion of the product or an injury to your body When transporting the air conditioner use a forklift and when moving the air conditioner by hand move the unit with 2 people Before opening the intake grille of the indoor unit or valve cover of the outdoor unit set the circuit breaker to the OFF position Failure to set the circuit breaker to the OFF position may result in electric shocks through contact with the interior parts Only a qualified installer 1 or qualified service person 1 is allowed to remove the intake grille of the indoor unit or valve cover of the outdoor unit and do the work required Before carrying out the installation maintenance repair or removal work be sure to set the circuit breaker to the OFF position Otherwise electric shocks may result Place a Work in progress sign near the circuit breaker while the installation maintenance repair or removal work is being carried out There is a danger of electric shocks if the circuit breaker is set to ON by mistake Only a qualified installer 1 or qualified service person 1 is allowed to undertake work at heights using a stand of 50 cm or more Wear protective gloves and safety work clothing during installation servicing and removal Do not touch the aluminum fin of the outdoor unit You may injure yourself if you do so If the fin must be touched for some reason first put on protective
151. n werden dass er nicht durchh ngt Elektrische Verdrahtung Nur ein qualifizierter Installateur 1 oder ein qualifizierter Servicetechniker 1 darf Elektroarbeiten an der Klimaanlage ausf hren Unter keinen Umst nden d rfen diese Arbeiten von unqualifizierten Mitarbeitern ausgef hrt werden da eine nicht sachgem e Ausf hrung der Arbeit zu Stromschl gen und oder Kriechstr men f hren kann Bei der Installation des Ger ts m ssen die nationalen Verdrahtungsvorschriften eingehalten werden Leistungseinschr nkungen im Stromkreis oder eine fehlerhafte Installation k nnen elektrische Schl ge oder Br nde verursachen Beachten Sie beim Legen von elektrischen Leitungen die Spezifikationen im Installationshandbuch sowie die Bestimmungen der rtlich g ltigen Bestimmungen und Gesetze Bei Verwendung von Kabeln die die Spezifikationen nicht erf llen kann es zu Stromschl gen Kriechstr men Rauchentwicklung und oder Br nden kommen Stellen Sie sicher dass das Erdungskabel angeschlossen ist Erdungsarbeiten Durch unzureichende Erdung k nnen Sie einen elektrischen Schlag erleiden Schlie en Sie die Erdungsleiter nicht an Gasrohre Wasserleitungsrohre Blitzableiter oder den Massedraht von Telefonen an Pr fen Sie nach Abschluss der Reparatur oder Umsetzungsarbeiten ob die Erdungsleiter korrekt angeschlossen sind Installieren Sie einen Schutzschalter der die Spezifikationen im Installationshandbuch sowie die Bestimmu
152. nd Rechtsvorschriften Erwurde speziell geschult K ltemittelhandhabungs und Rohrleitungsarbeiten an den von der Toshiba Carrier Corporation hergestellten Klimaanlagen auszuf hren Alternativ kann diese Person bez glich dieser Arbeiten von einem oder mehreren Mitarbeitern instruiert worden sein welche eine derartige Schulung absolviert haben und ist somit mit dem f r diese Aufgaben erforderlichen Wissen bestens vertraut Der qualifizierte Installateur der ber eine Erlaubnis f r H henarbeiten verf gt wurde speziell geschult Arbeiten an von der Toshiba Carrier Corporation hergestellten Klimaanlagen an hochgelegenen Arbeitspl tzen auszuf hren Alternativ kann diese Person bez glich dieser Arbeiten von einem oder mehreren auf diesem Gebiet geschulten Mitarbeitern instruiert worden sein und ist somit mit dem f r diese Arbeiten erforderlichen Wissen bestens vertraut Schutzhandschuhe f r Elektriker Der qualifizierte Servicetechniker ist ein Auftragnehmer der die von der Toshiba Carrier Corporation hergestellten Klimaanlagen installiert repariert wartet umsetzt und entsorgt Dieser Auftragnehmer wurde speziell geschult die von der Toshiba Carrier Corporation hergestellten Klimaanlagen zu installieren reparieren warten umzusetzen und zu entsorgen Alternativ kann diese Person bez glich dieser Aufgaben von einem oder mehreren Mitarbeitern instruiert worden sein welche eine spezifische Schulung absolvier
153. ndo fuori servizio in prossimit dell interruttore automatico fino all arrivo di un tecnico dell assistenza qualificato Qualora si continui a utilizzare il condizionatore d aria in presenza di un problema si potrebbe provocare il peggioramento dei problemi meccanici o produrre scosse elettriche e cosi via 25 IT 1115150101 EN indd 13 Al termine del lavoro di riparazione utilizzare un tester di isolamento megaohmmetro tipo Megger da 500 V per verificare che la resistenza tra la sezione di carica e la sezione metallica di non carica sezione di terra sia pari o superiore a 1 MQ Qualora il valore di resistenza sia basso potrebbe verificarsi un grave problema quale una dispersione o una scossa elettrica dal lato dell utente Al completamento del lavoro di installazione controllare eventuali perdite di refrigerante e controllare la resistenza di isolamento e lo scarico dell acqua Quindi eseguire un funzionamento di prova per controllare che il condizionatore d aria funzioni correttamente Una volta completata l installazione quindi di estrema importanza verificare che non vi siano perdite Qualora si verifichi una perdita di gas refrigerante in una stanza e il gas entri in contatto con delle fiamme ad esempio in una cucina si potrebbero generare gas tossici Spiegazioni fornite all utente Al completamento del lavoro di installazione comunicare all utente dove sia situato l interruttore automatico Qualora l utente non sap
154. ndo instalar um disjuntor no exterior instale um disjuntor concebido para utilizar ao ar livre N o deve ampliar o cabo de alimenta o em nenhuma circunst ncia O problema da liga o em locais em que o cabo ampliado pode originar fumo e ou um inc ndio Teste de funcionamento Antes de utilizar o aparelho de ar condicionado ap s a conclus o do trabalho verifique se a tampa da caixa do controlo el ctrico da unidade interior e a tampa da v lvula da unidade exterior est o fechadas e coloque o disjuntor el ctrico na posi o ON Pode sofrer um choque el ctrico etc se ligar a corrente el ctrica sem efectuar primeiro estas verifica es Quando detectar algum tipo de problema como por exemplo quando aparecer uma indica o de erro existir um cheiro a queimado ouvir sons anormais o aparelho de ar condicionado n o arrefecer ou aquecer ou existir uma fuga de gua no aparelho de ar condicionado n o toque no aparelho de ar condicionado coloque o disjuntor el ctrico na posi o OFF e contacte um t cnico de assist ncia qualificado Tome as medidas necess rias para garantir que a corrente el ctrica n o ser ligada atrav s da coloca o do aviso fora de servi o junto ao disjuntor de servi o por exemplo at chegar o t cnico de assist ncia qualificado Se continuar a utilizar o aparelho de ar condicionado com problemas pode provocar o aumento dos problemas mec nicos ou choques el ctricos etc Depois de
155. ngen der lokalen Gesetze und die Rechtsvorschriften erf llt Bringen Sie den Schutzschalter an einem Ort an wo er f r den Bediener problemlos erreichbar ist Wenn der Schutzschalter im Freien installiert werden soll verwenden Sie einen daf r geeigneten Schutzschalter Das Stromkabel darf unter keinen Umst nden durch ein Verl ngerungskabel erweitert werden Bei Anschlussproblemen des Kabels an den Verl ngerungsstellen kann es zu Rauchentwicklungen und oder Br nden kommen Testlauf Stellen Sie nach Abschluss der Arbeiten vor der Inbetriebnahme der Klimaanlage sicher dass die Abdeckung des Stromkastens am Innenger t und die Ventilabdeckung des Au enger ts geschlossen sind und der Schutzschalter auf die Position ON ein eingestellt ist Sie k nnen einen Stromschlag oder andere Verletzung erleiden wenn das Ger t eingeschaltet wird ohne dass Sie dies vorher sichergestellt haben Wenn Sie festgestellt haben dass Probleme mit der Klimaanlage aufgetreten sind z B ein Fehler wird angezeigt es riecht verbrannt ungew hnliche Ger usche sind zu h ren die Klimaanlage k hlt bzw heizt nicht oder Wasser l uft aus dann manipulieren Sie nicht selbst an der Klimaanlage sondern stellen Sie den Schutzschalter auf die Position OFF aus und wenden Sie sich an einen Servicetechniker Stellen Sie sicher dass der Strom nicht wieder eingeschaltet wird indem Sie beispielsweise den Schutzschalter durch au er Betrieb kennzeichnen
156. nsor TH error e e e O 8 Heat exchanger sensor TE TS connection error O e e O 9 EEPROM error e e e O 10 Compressor breakdown 9 9 O 11 Compressor lock e e e O 12 Current detection circuit error e e 13 Case thermostat operation 9 e O 14 Model data not set e e 9 9 O 15 Discharge temperature error e e e O 16 Power supply error e 9 e O 17 High pressure SW error O e e O 18 Heat sink overheating error e e O 19 Gas leak detected e Q 20 4 way valve reverse error e e 9 O 21 High pressure release operation O e e O 22 Fan system error e 9 e O 23 Drive device short circuiting O e O 24 Position detection circuit error e e O 25 Compressor IPDU or other not specifically identified 9 O ON OFF Rapid flashing 5 times sec The LEDs and switches are located at the top right of the P C board of the outdoor unit as shown in the figure on the right LED displays O O O O O O D800 D801 D802 D803 D804 D805 Yellow Yellow Yellow Yellow Yellow Green 78 EN 8 24 13 9 40 AM 15 Appendix Work instructions The existing R22 and R407C piping can be reused for our digital inverter R410A product installations N WARNING Confirming the existence of scratches or dents on the existing pipes and
157. nt including inverter equipment private power generator medical equipment and communication equipment is used Installation in such a location may cause malfunction of the air conditioner abnormal control or problems due to noise from such equipment A location in which the discharged air of the outdoor unit blows against the window of a neighboring house A location where the operating noise of the outdoor unit is transmitted When the outdoor unit is installed in an elevated position be sure to secure its feet 61 EN 1115150101 EN indd 31 Alocation in which drain water poses any problems NCAUTION 1 2 Install the outdoor unit in a location where the discharge air is not blocked When an outdoor unit is installed in a location that is always exposed to strong winds like a coast or on the high stories of a building secure normal fan operation by using a duct or wind shield When installing the outdoor unit in a location that is constantly exposed to strong winds such as on the upper stairs or rooftop of a building apply the windproofing measures referred to in the following examples 1 Install the unit so that its discharge port faces the wall of the building Keep a distance 500 mm or more between the unit and wall surface 500 mm baa 2 Consider the wind direction during the operational season of the air conditioner and install the unit so that the discharge port is set at a right angle re
158. ntos relacionados com estas opera es Instalador qualificado O instalador qualificado e autorizado para efectuar os trabalhos de instala o de tubagens e manuseamento do refrigerante envolvidos na instala o mudan a e elimina o tem as qualifica es adequadas para o trabalho de instala o das tubagens e o manuseamento do refrigerante conforme estipulado pelos regulamentos e as leis locais e uma pessoa que teve forma o relacionada com o trabalho de instala o de tubagens e manuseamento do refrigerante dos aparelhos de ar condicionado fabricados pela Toshiba Carrier Corporation ou alternativamente recebeu instru es relacionadas com estas opera es de pessoas que tiveram forma o e por conseguinte tem conhecimentos relacionados com este trabalho O instalador qualificado e autorizado para trabalhar em altura teve forma o em mat rias relacionadas com o trabalho em altura com os aparelhos de ar condicionado fabricados pela Toshiba Carrier Corporation ou alternativamente recebeu instru es relacionadas com estas opera es de pessoas que tiveram forma o e por conseguinte tem conhecimentos relacionados com este trabalho O tecnico de assist ncia qualificado amp uma pessoa que instala repara mant m muda e elimina os aparelhos de ar condicionado fabricados pela Toshiba Carrier Corporation O t cnico de assist ncia qualificado teve formagao para instalar reparar manter mudar e eliminar os apar
159. o na posi o ON at ao fim das repara es Depois de concluir o trabalho de instala o utilize o Manual do Propriet rio para explicar ao cliente como utilizar e manter a unidade Mudan a Apenas um instalador qualificado 1 ou um t cnico de assist ncia qualificado 1 pode mudar o aparelho de ar condicionado perigoso o aparelho de ar condicionado ser mudado por uma pessoa n o qualificada porque pode ocorrer um inc ndio choques el ctricos les es fugas de gua ru dos e ou vibra es Quando efectuar o trabalho de bombagem encerre o compressor antes de desligar o tubo de refrigerante Se desligar o tubo de refrigerante com a v lvula de servi o aberta e o compressor em funcionamento provocar a suc o do ar etc o aumento da press o no ciclo de refrigera o para um n vel elevado anormal e resultando possivelmente em les es recoloca o etc 1 Consulte a Defini o de Instalador Qualificado ou T cnico de Assist ncia Qualificado NATEN O Instala o do aparelho de ar condicionado com novo refrigerante Este aparelho de ar condicionado adopta o novo refrigerante HFC R410A que n o destr i a camada de ozono O refrigerante R410A mais suscept vel a impurezas como por exemplo gua membranas oxidadas e leos porque a press o de funcionamento do refrigerante R410A cerca de 1 6 vezes a do refrigerante R22 Com a adop o do novo refrigerante o leo de refrigera o foi
160. o se debe a un fallo como por ejemplo una fuga o una descarga el ctrica en el lado del usuario Al completar el trabajo de instalaci n verifique que no haya fugas de refrigerante y tambi n la resistencia del aislamiento y el drenaje de agua A continuaci n efect e una prueba de funcionamiento para verificar si el aparato de aire acondicionado funciona correctamente Tras la instalaci n aseg rese de que no existen fugas de gas refrigerante Si se produce una fuga de gas refrigerante en la habitaci n y hay una fuente de fuego pr xima como una cocina podr a generarse gas nocivo 31 ES 1115150101_EN indd 16 16 Explicaciones para dar al usuario finalizar el trabajo de instalaci n indique al usuario d nde se encuentra el disyuntor Si el usuario no sabe d nde est el disyuntor l o ella no podr n desconectar la alimentaci n en el caso de que se produzca un fallo en el aparato de aire acondicionado Si detecta que la rejilla del ventilador est da ada no se dirija a la unidad exterior sino desconecte el disyuntor y p ngase en contacto con una persona de mantenimiento cualificada 1 para que la repare No ponga el disyuntor en la posici n ON hasta despu s de terminar las reparaciones Despu s de hacer el trabajo de instalaci n siga las indicaciones del manual del propietario para explicar al cliente c mo usar y mantener la unidad Traslado Solo un instalador cualificado 1 o una persona de
161. o vestu rio de trabalho de seguranca e em seguida prossiga N o suba para nem coloque objectos sobre a unidade exterior Pode cair ou os objectos podem cair da unidade exterior e provocar ferimentos Quando trabalhar em altura utilize uma escada em conformidade com a norma ISO 14122 e efectue o procedimento descrito nas instru es da escada Utilize tamb m um capacete industrial como equipamento de protec o para efectuar o trabalho Quando limpar o filtro ou outras pegas da unidade exterior n o se esquega de colocar o disjuntor el ctrico na posic o OFF e um sinal Trabalho em progresso junto ao disjuntor el ctrico antes de continuar o trabalho Quando trabalhar em altura coloque um sinal no local para que ningu m se aproxime do local de trabalho antes de continuar com o trabalho As pe as e outros objectos podem cair da parte superior ferindo possivelmente uma pessoa que esteja por baixo O refrigerante utilizado por este aparelho de ar condicionado o R410A Certifique se de que o aparelho de ar condicionado transportado de uma forma est vel N o modifique os produtos Nao desmonte nem modifique as pecas Isso pode resultar num inc ndio choque el ctrico ou les o f sica Selecc o do local de instalac o Seinstalar a unidade numa sala pequena tome as medidas adequadas para evitar que o refrigerante exceda o limite de concentrac o mesmo em caso de derrame Consulte o revendedor a quem adquiriu o condic
162. ocal suficientemente forte para suportar o peso da unidade exterior Uma resist ncia insuficiente pode causar a queda da unidade exterior o que poderia provocar ferimentos Seogas refrigerante vazar durante o trabalho de instala o ventile o ambiente imediatamente Se o g s refrigerante que escapou entrar em contacto com fogo poder dar origem a g s t xico Tubagem do refrigerante Instale correctamente o tubo de refrigerante durante a instala o antes de colocar o aparelho de ar condicionado em funcionamento Se operar o compressor com a v lvula aberta e sem o tubo de refrigerante o compressor suga o ar e os ciclos de refrigera o ficam sobrepressurizados o que pode provocar uma les o Aperte a porca c nica com uma chave dinamom trica e da forma especificada O aperto excessivo da porca c nica pode provocar uma racha na porca c nica ap s um longo per odo que pode resultar na fuga de refrigerante Quando instalar ou mudar o aparelho de ar condicionado siga as instru es fornecidas no Manual de Instala o e elimine o ar completamente para que nenhum g s para al m do refrigerante seja misturado no ciclo de refrigera o A n o elimina o completa do ar pode provocar uma avaria no aparelho de ar condicionado Tem de utilizar g s de nitrog nio para o teste de impermeabilidade Tem de ligar o tubo de carga para que n o exista nenhuma folga Cablagem el ctrica Apenas um instalador qualificado 1 ou um t
163. oelolie te voorkomen hebben de aansluitstukken van de vulopening van de hoofdeenheid en de installatiegereedschappen een andere maat dan die voor het conventionele koelmiddel Voor het nieuwe koelmiddel R410A zijn andere speciale gereedschappen nodig Gebruik voor de aansluitleidingen nieuwe en schone leidingen met hogedrukpakkingen die ontworpen zijn voor R410A en voorkom dat er water en of stof in het systeem terechtkomt Loskoppelen van de hoofdstroomvoorziening Dit systeem moet met de hoofdstroomtoevoer worden verbonden met gebruik van een circuitonderbreker of schakelaar met contactscheiding van ten minste 3 mm De stroomtoevoer van de airconditioner moet voorzien zijn van een installatiezekering alle types zekeringen kunnen gebruikt worden Was airconditioners niet met hogedrukreinigers Lekkage van elektrische onderdelen kan leiden tot elektrische schokken of brand 8 24 13 9 40 AM 44 NL x29 rou Toshiba 2006 42 EK
164. ondicionado manualmente mova o com duas pessoas Antes de abrir a grelha de admiss o de ar da unidade interior ou a tampa da v lvula da unidade exterior coloque o disjuntor el ctrico na posic o OFF A n o colocac o do disjuntor na posic o OFF pode provocar choques el ctricos devido ao contacto com as pecas internas Apenas um instalador qualificado 1 ou um t cnico de assist ncia qualificado 1 pode retirar a grelha de admiss o de ar da unidade interior ou a tampa da v lvula da unidade exterior e efectuar os trabalhos necess rios Antes de efectuar o trabalho de instalac o manutenc o reparac o ou de eliminac o certifique se de que coloca o disjuntor el ctrico na posigao OFF Caso contr rio podem ocorrer choques el ctricos Coloque um sinal Trabalho em progresso junto ao disjuntor durante a realizac o de trabalhos de instalac o manuteng o repara o ou eliminac o Existe um perigo de choques el ctricos se colocar o disjuntor na posi o ON por engano Apenas um instalador qualificado 1 ou um t cnico de assist ncia qualificado 1 pode efectuar o trabalho em altura utilizando um suporte de 50 cm ou mais Utilize luvas de protec o e vestu rio de trabalho de seguranca durante a instalac o a assist ncia e a eliminac o N o toque na palheta de alum nio da unidade exterior Pode ferir se se o fizer Se for necess rio tocar na palheta por algum motivo coloque primeiro as luvas de protec o e
165. onditioner 29 4 Installation conditions 30 5 Refrigerant piping 33 6 Air Purging 22 34 if Electrical WOM zz A DAD Ee lem 35 8 Earthing si La ee 36 9 Finishing cuina 36 10 TESE as cio 36 11 Annual maintenance eten ended ede eR ERRARE 36 12 Air conditioner operating conditions 37 13 Functions to be implemented locally 37 14 Troubleshooting i oeren Harst a 39 15 Appendix zier id 40 16 Specifications 22 2 HR ini 41 1 EN 2 EN 1115150101_EN indd 1 8 24 13 10 08 AM 3 EN Thank you for purchasing this Toshiba air conditioner Please read carefully through these instructions that contain important information which complies with the Machinery Directive Directive 2006 42 EC and ensure that you understand them After reading these instructions be sure to keep them in a safe place together with the Owner s Manual and Installation Manual supplied with your product Generic Denomination Air Conditioner Definition of Qualified Installer or Qualified Service Person The air conditioner must be installed maintained repaired and removed by a qualified installer or qualified service person
166. oppi lesioni personali e cosi via 1 Consultare la Definizione di installatore qualificato o tecnico dell assistenza qualificato NATTENZIONE Installazione del condizionatore d aria con il nuovo refrigerante Questo condizionatore d aria adotta il nuovo refrigerante HFC R410A che non danneggia lo strato di ozono Il refrigerante R410A soggetto a subire l effetto negativo di impurit quali acqua membrana di ossidazione e oli poich la pressione di esercizio del refrigerante R410A pari a circa 1 6 volte quella del refrigerante R22 Insieme all adozione del nuovo refrigerante anche l olio di refrigerazione stato cambiato Pertanto durante l installazione assicurarsi che acqua polvere refrigerante precedente o olio di refrigerazione non penetrino nel circuito di refrigerazione del condizionatore che utilizza il nuovo tipo di refrigerante RA10A Per evitare di mescolare refrigerante o olio di refrigerazione le dimensioni delle sezioni di collegamento dell attacco di carico dell unit principale e gli attrezzi di installazione sono diversi da quelli utilizzati per le unit a refrigerante tradizionale Di conseguenza per le unit che utilizzano il nuovo refrigerante R410A sono necessari attrezzi speciali Per i tubi di collegamento utilizzare tubazioni nuove e pulite con raccordi ad alta pressione progettati solo per R410A affinch acqua e o polvere non penetrino Per scollegare l apparecchio dalla fonte di alimentazione p
167. ot install the air conditioner in a location that may be subject to a risk of expire to a combustible gas If a combustible gas leaks and becomes concentrated around the unit a fire may occur When transporting the air conditioner wear shoes with additional protective toe caps When transporting the air conditioner do not take hold of the bands around the packing carton You may injure yourself if the bands should break Do not place any combustion appliance in a place where it is directly exposed to the wind of air conditioner otherwise it may cause imperfect combustion Installation Install the air conditioner at enough strong places to withstand the weight of the unit If the strength is not enough the unit may fall down resulting in injury Follow the instructions in the Installation Manual to install the air conditioner Failure to follow these instructions may cause the product to fall down or topple over or give rise to noise vibration water leakage etc The designated bolts M10 and nuts M10 for securing the outdoor unit must be used when installing the unit Install the outdoor unit property in a location that is durable enough to support the weight of the outdoor unit Insufficient durability may cause the outdoor unit to fall which may result in injury If refrigerant gas has leaked during the installation work ventilate the room immediately If the leaked refrigerant gas comes in contact with fire noxious gas
168. pia dove si trovi l interruttore automatico non sar in grado di disattivarlo nell eventualit che si verifichi un problema con il condizionatore d aria Selo schermo della ventola danneggiato non avvicinarsi all unit esterna ma portare l interruttore in posizione OFF e rivolgersi al personale di assistenza qualificato 1 perch provveda a effettuare le necessarie riparazioni Non impostare l interruttore automatico sulla posizione ON acceso finch non siano state completate le riparazioni AI termine del lavoro di installazione seguire il Manuale del proprietario per spiegare al cliente come utilizzare e sottoporre a manutenzione l unit Trasferimento Soloun installatore qualificato 1 o un tecnico dell assistenza qualificato 1 sono autorizzati a trasferire il condizionatore d aria pericoloso far trasferire il condizionatore d aria da una persona non qualificata in quanto si potrebbero provocare incendi scosse elettriche lesioni personali perdite d acqua rumori e o vibrazioni Quando si eseguono lavori di svuotamento del refrigerante Pump down spegnere il compressore prima di scollegare il tubo del refrigerante Qualora si scolleghi il tubo del refrigerante con la valvola di servizio aperta e il compressore ancora in funzione si provocherebbe il risucchio d aria e cosi via il che farebbe innalzare a un livello anormale la pressione all interno del circuito di refrigerazione con la possibilit di provocare sc
169. pueden generarse gases t xicos Tubos de refrigerante Instale firmemente el tubo del refrigerante durante los trabajos de instalaci n antes de poner en funcionamiento el aparato de aire acondicionado Si el compresor funciona con su v lvula abierta y sin tubo de refrigerante el compresor succionar aire y los ciclos de refrigeraci n tendr n una presi n excesiva lo que puede causar lesiones Apriete la tuerca abocinada con una llave de ajuste dinamom trica como se indica Un apriete excesivo de la tuerca abocinada puede causar grietas en la misma con el paso del tiempo lo que podr a causar fugas de refrigerante Cuando el aparato de aire acondicionado haya sido instalado o recolocado siga las instrucciones del manual de instalaci n y purgue completamente el aire para que no se mezclen otros gases que no sean el refrigerante en el ciclo de refrigeraci n Si el aire no se purga completamente puede que el aparato de aire acondicionado funcione de forma incorrecta Para la prueba de hermeticidad al aire deber usarse gas nitr geno La manguera de carga deber conectarse de forma que no est floja Cableado el ctrico Solo un instalador cualificado 1 o una persona de mantenimiento cualificada 1 tiene permitido realizar el trabajo el ctrico del aparato de aire acondicionado Este trabajo no deber hacerlo bajo ninguna circunstancia una persona que no est cualificada ya que si el trabajo se efect a de forma inco
170. r Corporation hergestellten Klimaanlagen installiert wartet umsetzt und entsorgt Dieser Auftragnehmer wurde Reparatur des speziell geschult die von der Toshiba Carrier Corporation hergestellten Klimaanlagen zu installieren Au enger ts zu warten umzusetzen und zu entsorgen Alternativ kann diese Person bez glich dieser Aufgaben von einem oder mehreren Mitarbeitern instruiert worden sein welche eine spezifische Schulung absolviert haben Somit ist der Auftragnehmer mit dem f r diese Aufgaben erforderlichen Wissen bestens vertraut Der qualifizierte Installateur der die f r Installation Umsetzung und Entsorgung erforderlichen Elektroarbeiten ausf hren darf verf gt ber die f r diese Elektroarbeiten erforderlichen Qualifikationen im Einklang mit den lokalen Gesetzen und Rechtsvorschriften Er wurde speziell geschult Elektroarbeiten an den von der Toshiba Carrier Corporation hergestellten Klimaanlagen auszuf hren Alternativ kann diese Person bez glich dieser Arbeiten von einem oder mehreren naia Mitarbeitern instruiert worden sein welche eine derartige Schulung absolviert haben und ist somit mit dem f r diese Aufgaben erforderlichen Wissen bestens vertraut Der qualifizierte Installateur der die f r Installation Umsetzung und Entsorgung erforderlichen K ltemittelhandhabungs und Rohrleitungsarbeiten ausf hren darf verf gt ber die f r diese Arbeiten erforderlichen Qualifikationen im Einklang mit den lokalen Gesetzen u
171. r de la unidad podr a producirse un incendio Cuando transporte el aparato de aire acondicionado p ngase zapatos con protecci n adicional en las punteras Cuando transporte el aparato de aire acondicionado no lo agarre por las bandas de alrededor del cart n de embalaje Podr a lesionarse en caso de rotura de las bandas No coloque ning n aparato de combusti n en un lugar expuesto directamente al aire procedente del aparato de aire acondicionado de lo contrario la combusti n no ser a perfecta 30 ES 8 24 13 9 40 AM Instalaci n Instale el aparato de aire acondicionado en lugares suficientemente fuertes que puedan aguantar el peso de la unidad Si la resistencia no es suficiente la unidad puede caerse y causar lesiones Siga las instrucciones del manual de instalaci n para instalar el aparato de aire acondicionado Si no se cumplen estas instrucciones el producto podr a caer o volcar o producir ruido vibraci n fugas de agua etc Cuando se instale la unidad exterior deber n usarse los pernos M10 y las tuercas M10 designados para fijarla Instale correctamente la unidad exterior en un lugar que sea lo suficientemente resistente como para aguantar su peso De lo contrario la unidad exterior podr a caer y provocar lesiones Si se producen fugas de gas refrigerante durante la instalaci n ventile inmediatamente la habitaci n Si el gas refrigerante liberado durante la fuga entra en contacto con fuego
172. rait d tre d fectueuse 12 FR 8 24 13 9 40 AM Installation Installez le climatiseur dans un endroit suffisamment resistant pour supporter son poids Si l endroit n est pas assez r sistant l unit peut tomber et provoquer des blessures Suivez les instructions du Manuel d installation pour installer le climatiseur Ne pas suivre ces instructions peut entrainer la chute ou le basculement du produit ou engendrer du bruit des vibrations une fuite d eau etc Les boulons M10 et les crous M10 d sign s pour fixer l unit ext rieure doivent tre utilis s lors de l installation de l unit Installez l unit ext rieure dans un lieu assez r sistant pour supporter le poids de l unit ext rieure Si la durabilit est insuffisante l unit peut tomber et blesser quelqu un Sile gaz frigorig ne a fui durant l installation a rez imm diatement la pi ce Si le gaz frigorig ne qui a fui entre en contact avec une flamme nue un gaz nocif peut se d gager Tuyaux de fluide frigorigene Fixez solidement le tuyau de r frig rant pendant l installation avant de faire fonctionner le climatiseur Si le compresseur est utilis avec la vanne ouverte et sans que le tuyau de fluide frigorig ne soit branch le compresseur aspire l air et le circuit de r frig ration est alors en surpression Dans ce cas les tuyaux risquent de blesser quelqu un Serrez l crou vas avec une cl dynamom trique de la mani re sp cif
173. rali Prima di iniziare a installare il condizionatore d aria leggere attentamente il Manuale di installazione e seguire le relative istruzioni per installare il condizionatore d aria Soloun installatore qualificato 1 o un tecnico dell assistenza qualificato 1 sono autorizzati a installare il condizionatore d aria L eventuale installazione del condizionatore d aria da parte di una persona non qualificata potrebbe causare incendi scosse elettriche lesioni personali perdite d acqua rumori e o vibrazioni Peril rabbocco o la sostituzione non utilizzare liquido refrigerante diverso da quello specificato Altrimenti nel ciclo di raffreddamento potrebbe generarsi una situazione anomala di alta pressione che potrebbe provocare dei guasti l esplosione del prodotto o ferimenti Pertrasportare il condizionatore d aria utilizzare un elevatore a forca e quando si intende spostare il condizionatore d aria a mano spostare l unit insieme a 2 persone Prima di aprire la griglia della presa d aria dell unit interna o il coprivalvole dell unit esterna impostare l interruttore automatico sulla posizione OFF spento La mancata impostazione dell interruttore automatico sulla posizione OFF spento potrebbe provocare scosse elettriche attraverso il contatto con le parti interne Solo un installatore qualificato 1 o un tecnico dell assistenza qualificato 1 sono autorizzati a rimuovere la griglia della presa d aria o il coprivalvole dell uni
174. reift Das K ltemittel R410A ist anf lliger f r Verunreinigungen durch Wasser Membranoxidation und Ole da der Druck des K ltemittels R410A etwa das 1 6 Fache des K ltemittels R22 betr gt Gleichzeitig mit dem Einsatz des neuen K ltemittels wurde auch das bisher verwendete K ltemaschinen l gewechselt Achten Sie daher bei der Installation darauf dass kein Wasser Staub altes K ltemittel oder altes K ltemaschinen l in den K hlkreislauf des Klimager ts mit dem neuen K ltemittel R410A ger t Um zu verhindern dass falsches K ltemittel und K ltemaschinen l eingef llt wird wurde gegen ber Systemen mit konventionellen K ltemitteln die Gr e der Anschl sse zur Bef llung der Haupteinheit ge ndert Au erdem werden andere Installationswerkzeuge verwendet Aus diesem Grund sind f r Ger te mit neuem K ltemittel R410A Spezialwerkzeuge erforderlich Verwenden Sie f r die Rohrleitungen neues sauberes Rohrmaterial mit Hochdruckverschraubung speziell f r R410A so dass kein Wasser und oder Staub eindringen kann Trennen des Ger tes von der Hauptstromversorgung Das Ger t muss ber einen Schalter dessen Kontakte einen Mindestabstand von 3 mm haben an die Hauptstromversorgung angeschlossen werden Die Installationssicherung muss f r die Stromversorgungsleitung dieses Klimagerats verwendet werden hierf r k nnen alle Sicherungstypen verwendet werden Waschen Sie Klimager te nicht Hochdruckreinigern Kriechstr me k nn
175. rier Corporation o in alternativa ha ricevuto istruzioni relative a tali argomenti da parte di uno o pi individui che sono stati addestrati e pertanto ha piena dimestichezza con le nozioni relative a tali lavori L installatore qualificato che autorizzato a lavorare in altezza stato addestrato relativamente agli argomenti pertinenti al lavoro in altezza con i condizionatori d aria prodotti da Toshiba Carrier Corporation o in alternativa ha ricevuto istruzioni relative a tali argomenti da parte di uno o pi individui che sono stati addestrati e pertanto ha piena dimestichezza con le nozioni relative a tali lavori Installatore qualificato Il tecnico dell assistenza qualificato una persona che installa ripara sottopone a manutenzione trasferisce e rimuove i condizionatori d aria prodotti da Toshiba Carrier Corporation Tale persona stata addestrata a installare riparare sottoporre a manutenzione trasferire e rimuovere i condizionatori d aria prodotti da Toshiba Carrier Corporation o in alternativa ha ricevuto istruzioni relative a tali operazioni da parte di uno o pi individui che sono stati addestrati e pertanto ha piena dimestichezza con le nozioni relative a tali operazioni Il tecnico dell assistenza qualificato che autorizzato a svolgere lavori sugli impianti elettrici durante l installazione la riparazione il trasferimento e la rimozione dispone delle qualifiche relative a tali lavori sugli
176. rincipale L unit deve essere collegata alla linea elettrica principale interponendo un interruttore di sicurezza automatico o un normale interruttore con almeno 3 mm di separazione fra i contatti Lalinea di alimentazione elettrica dell unit esterna deve essere protetta con un fusibile di qualsiasi tipo Non lavare i condizionatori macchine per il lavaggio ad alta pressione Le dispersioni di elettricit possono causare incendi e scariche elettriche 26 IT 8 24 13 9 40 AM 27 ES Le agradecemos la compra de este aparato de aire acondicionado de Toshiba Lea atenta y completamente estas instrucciones que contienen informaci n importante conforme a la Directiva de Maquinaria Directiva 2006 42 EC y aseg rese de entenderlas bien Despues de leer estas instrucciones aseg rese de guardarlas en un lugar seguro junto con el manual del propietario y el manual de instalaci n incluido con el producto Denominacion generica Aire acondicionado Definici n de instalador cualificado o persona de mantenimiento cualificada aparato de aire acondicionado debera ser instalado mantenido reparado y desechado por un instalador cualificado o por una persona de mantenimiento cualificada Cuando se tengan que efectuar cualquiera de estos trabajos acuda a un instalador cualificado o a una persona de mantenimiento cualificada para que los haga por usted Un instalador cualificado o una persona de mantenimiento cualificada es un
177. rrecta existe el peligro de que se produzcan descargas el ctricas y o fugas el ctricas La instalaci n del aparato debe realizarse en conformidad con las normas nacionales de cableado La falta de capacidad de un circuito el ctrico o una instalaci n incorrecta pueden provocar una descarga el ctrica o un incendio Use cables que cumplan con las especificaciones del Manual de instalaci n y las estipulaciones de las normas y leyes locales El uso de cables que no cumplen con las especificaciones puede dar origen a descargas el ctricas fugas el ctricas humo y o incendios Aseg rese de conectar el cable de tierra Puesta a tierra La conexi n a tierra incompleta puede causar descargas el ctricas No conecte los cables de toma a tierra a tubos de gas tubos de agua pararrayos o cables de toma a tierra de tel fonos Despu s de completar el trabajo de reparaci n y recolocaci n verifique que los cables de toma a tierra est n bien conectados Instale un disyuntor que cumpla con las especificaciones del manual de instalaci n y con las disposiciones de la normativa y legislaci n locales vigentes Instale el disyuntor donde el agente pueda tener acceso a l f cilmente Cuando instale el disyuntor en el exterior instale uno dise ado para uso en exteriores El cable no deber alargarse bajo ninguna circunstancia Los problemas de conexi n en lugares donde el cable se extiende pueden producir humo y o un incendio
178. ry bulb temp Wet bulb temp Heating operation If air conditioner is used outside of the above conditions safety protection may work 13Functions to be implemented locally B Handling existing pipe When using the existing pipe carefully check for the following Wall thickness within the specified range Scratches and dents Water oil dirt or dust in the pipe Flare looseness and leakage from welds Deterioration of copper pipe and heat insulator Cautions for using existing pipe Do not reuse a flare nut to prevent gas leaks Replace it with the supplied flare nut and then process it to a flare Blow nitrogen gas or use an appropriate means to keep the inside of the pipe clean If discolored oil or much residue is discharged wash the pipe Check welds if any on the pipe for gas leaks When the pipe corresponds to any of the following do not use it Install a new pipe instead The pipe has been opened disconnected from indoor unit or outdoor unit for a long period The pipe has been connected to an outdoor unit that does not use refrigerant R22 R410A or R407C The existing pipe must have a wall thickness equal to or larger than the following thicknesses kabang ang Wall thickness mm 06 4 0 8 29 5 0 8 012 7 0 8 015 9 1 0 019 0 1 0 Do not use any pipe with a wall thickness less than these thicknesses due to insufficient pressure capacity
179. scalera P ngase tambi n un casco de uso industrial como equipo de protecci n antes de empezar a trabajar Cuando limpie el filtro u otras partes de la unidad exterior coloque sin falta el disyuntor en la posici n OFF y coloque un aviso que diga trabajo en curso cerca del disyuntor mientras se realiza el trabajo Cuando trabaje en un lugar alto antes de empezar a trabajar coloque un aviso para que nadie se acerque al lugar de trabajo Desde la parte superior podr an caer piezas y otros objetos que causar an lesiones a las personas situadas debajo El refrigerante usado por este aparato de aire acondicionado es el R410A Deber asegurar que el aparato de aire acondicionado se transporta de forma estable No modifique los productos No desmonte ni modifique las piezas Podr a provocar incendios descargas el ctricas O lesiones Selecci n del lugar de instalaci n Si instala la unidad en una habitaci n peque a tome las medidas necesarias para impedir que el refrigerante sobrepase la concentraci n l mite aunque se produzcan fugas Consulte al distribuidor donde adquiri el aparato de aire acondicionado cuando ponga en pr ctica las medidas La acumulaci n de refrigerante altamente concentrado puede provocar un accidente por falta de ox geno No instale el aparato de aire acondicionado en un lugar donde pueda estar expuesto a un gas combustible Si se produce una fuga de gas combustible e ste se concentra alrededo
180. schikt als zodanig over alle vereiste kennis voor deze ingrepen Bevoegd installateur Een bevoegd onderhoudsmonteur is een persoon die zorgt voor het installeren repareren onderhouden verplaatsen en wegdoen van de airconditioners vervaardigd door de Toshiba Carrier Corporation Hij of zij is opgeleid voor het installeren repareren onderhouden verplaatsen en wegdoen van de airconditioners vervaardigd door de Toshiba Carrier Corporation of anders is hij of zij geinstrueerd in dergelijke ingrepen door een persoon of personen die daarvoor zijn opgeleid en beschikt als zodanig over alle vereiste kennis voor deze ingrepen De bevoegd onderhoudsmonteur die kan worden toegestaan de vereiste elektrische ingrepen te verrichten voor de installatie reparatie het verplaatsen en het wegdoen beschikt over de bevoegdheden voor dit elektricienswerk zoals vastgelegd in de plaatselijke wetten en voorschriften en hij of zij is opgeleid voor elektrici nswerk aan de airconditioners vervaardigd door de Toshiba Carrier Corporation of anders is hij of zij ge nstrueerd in dergelijke ingrepen door een persoon of personen die daarvoor zijn opgeleid en beschikt als zodanig over alle vereiste kennis voor deze ingrepen De bevoegd onderhoudsmonteur die kan worden toegestaan de nodige koelmiddelwerkzaamheden en buizenaanleg te verrichten voor de installatie reparatie het verplaatsen en het wegdoen beschikt over de bevoegdheden voor buizenaanleg en
181. sede che sia sufficientemente robusta da sostenere il peso dell unit esterna In caso contrario potrebbe ribaltarsi con conseguente pericolo di lesione per le persone Se durante l installazione si verifica una fuga del gas refrigerante occorre ventilare subito l ambiente Se il gas refrigerante fuoriuscito entra in contatto con le fiamme possibile che vengano generati gas tossici Tubi del liquido refrigerante Installare il tubo del refrigerante stabilmente durante i lavori di installazione prima di mettere in funzione il condizionatore d aria Se il compressore venisse messo in funzione con la valvola aperta e senza il tubo del refrigerante il compressore aspirerebbe aria e il circuito di refrigerazione raggiungerebbe una pressione eccessiva con la possibilit di causare lesioni personali Serrare il dado svasato con una chiave torsiometrica come illustrato Un serraggio eccessivo del dado svasato potrebbe causare delle spaccature nel lungo periodo il che potrebbe provocare perdite di refrigerante Quando il condizionatore d aria stato installato o trasferito attenersi alle istruzioni nel Manuale di installazione e spurgare completamente l aria in modo che nessun altro gas si mescoli al refrigerante nel circuito di refrigerazione Qualora non si effettui lo spurgo completo dell aria si potrebbe provocare un malfunzionamento del condizionatore d aria Perla prova di tenuta dell aria amp necessario utilizzare gas di azoto
182. t esterna e a svolgere il lavoro richiesto Prima di eseguire lavori di installazione manutenzione riparazione o rimozione assicurarsi di impostare l interruttore automatico sulla posizione OFF spento In caso contrario si potrebbero causare scosse elettriche Sistemare un cartello con l indicazione Lavori in corso in prossimit dell interruttore automatico durante l esecuzione di lavori di installazione manutenzione riparazione o rimozione Qualora l interruttore automatico sia impostato su ON acceso per errore sussiste il pericolo di scosse elettriche Soloun installatore qualificato 1 o un tecnico dell assistenza qualificato 1 sono autorizzati a eseguire lavori in altezza utilizzando un supporto di 50 cm o pi Durante l installazione la manutenzione e la rimozione indossare guanti di protezione e indumenti da lavoro di sicurezza Non toccare l aletta di alluminio dell unit esterna In caso contrario si potrebbero provocare lesioni personali Qualora sia necessario toccare l aletta per qualche motivo indossare prima guanti di protezione e indumenti da lavoro di sicurezza quindi procedere Non salire n collocare oggetti sull unit esterna Si potrebbe cadere o gli oggetti potrebbero cadere dall unit esterna e provocare lesioni personali Quando si lavora in altezza utilizzare una scala conforme allo standard ISO 14122 e attenersi alla procedura indicata nelle istruzioni della scala Inoltre indossare u
183. t haben Somit ist der Auftragnehmer mit dem f r diese Aufgaben erforderlichen Wissen bestens vertraut Der qualifizierte Servicetechniker der die f r Installation Reparatur Umsetzung und Entsorgung erforderlichen Elektroarbeiten ausf hren darf verf gt ber die f r diese Elektroarbeiten erforderlichen Qualifikationen im Einklang mit den lokalen Gesetzen und Rechtsvorschriften Er wurde speziell geschult Elektroarbeiten an den von der Toshiba Carrier Corporation hergestellten Klimaanlagen auszuf hren Alternativ kann diese Person bez glich dieser Arbeiten von einem oder mehreren Mitarbeitern instruiert worden sein welche eine derartige Schulung absolviert haben und ist somit mit EN na dem f r diese Aufgaben erforderlichen Wissen bestens vertraut Der qualifizierte Servicetechniker der die f r Installation Reparatur Umsetzung und Entsorgung erforderlichen K ltemittelhandhabungs und Rohrleitungsarbeiten ausf hren darf verf gt ber die f r diese Arbeiten erforderlichen Qualifikationen im Einklang mit den lokalen Gesetzen und Rechtsvorschriften Er wurde speziell geschult K ltemittelhandhabungs und Rohrleitungsarbeiten an den von der Toshiba Carrier Corporation hergestellten Klimaanlagen auszuf hren Alternativ kann diese Person bez glich dieser Arbeiten von einem oder mehreren Mitarbeitern instruiert worden sein welche eine derartige Schulung absolviert haben und ist somit mit dem f r diese Aufgaben erforderlichen Wissen
184. terminar o trabalho certifique se de que utiliza um aparelho de verifica o do isolamento megaohmimetro de 500 V para verificar se a resist ncia 1 MQ ou mais entre a sec o de carga e a sec o met lica sem carga Sec o de liga o terra Se o valor da resist ncia for baixo ocorre uma fuga ou um choque el ctrico no lado do utilizador 37 PT 1115150101 EN indd 19 19 Depois de concluir o trabalho de instala o verifique se existem fugas de refrigerante a resist ncia do isolamento e a drenagem de gua Realize um teste para verificar se o aparelho de ar condicionado est a funcionar correctamente Ap s o trabalho de instala o confirme que n o haja nenhuma fuga do g s refrigerante Se houver uma fuga de gas refrigerante para o compartimento que entre em contacto com uma chama por exemplo no caso de um fog o poder gerar g s t xico Explica es fornecidas ao utilizador Depois de concluir o trabalho de instala o indique o local de instala o do disjuntor ao utilizador Se o utilizador n o souber a localiza o do disjuntor el ctrico n o ser capaz de o desligar no caso de ocorrer um problema no aparelho de ar condicionado Se descobrir que o protector da ventoinha est danificado n o se aproxime da unidade exterior mas coloque o disjuntor na posi o desligada e contacte um t cnico de assist ncia qualificado 1 para proceder repara o N o coloque o disjuntor el ctric
185. ternativamente recebeu instru es relacionadas com estas operag es de pessoas que tiveram formag o e por conseguinte tem conhecimentos relacionados com este trabalho O t cnico de assist ncia qualificado e autorizado para trabalhar em altura teve forma o em mat rias relacionadas com o trabalho em altura com os aparelhos de ar condicionado fabricados pela Toshiba Carrier Corporation ou alternativamente o t cnico de assist ncia qualificado recebeu instrug es relacionadas com estas opera es de pessoas que tiveram formagao e por conseguinte tem conhecimentos relacionados com este trabalho 33 PT 34 PT 1115150101_EN indd 17 8 24 13 9 40 AM Indica es de aviso na unidade de ar condicionado Indica o de aviso Descri o ELECTRICAL SHOCK HAZARD Disconnect all remote electric power supplies before servicing AVISO PERIGO DE CHOQUE EL CTRICO Desligue todas as fontes de alimenta o el ctrica remotas antes de uma opera o de assist ncia Moving parts Do not operate unit with grille removed Stop the unit before the servicing AVISO Pe as rotativas N o utilize a unidade com a grelha retirada Pare a unidade antes de uma opera o de assist ncia CAUTION High temperature parts You might get burned when removing this panel ATEN O Pe as com elevadas temperaturas Pode queimar se quando retirar este painel CAUTION Do not touch the
186. the electrical work involved in installation repair relocation and removal has the qualifications pertaining to this electrical work as stipulated by the local laws and regulations and he or she is a person who has been trained in matters relating to electrical work on the air conditioners made by Toshiba Carrier Corporation or alternatively he or she has been instructed in such matters by an individual or individuals who have been trained and is thus thoroughly acquainted with the knowledge related to this work The qualified service person who is allowed to do the refrigerant handling and piping work involved in installation repair relocation and removal has the qualifications pertaining to this refrigerant handling and piping work as stipulated by the local laws and regulations and he or she is a person who has been trained in matters relating to refrigerant handling and piping work on the air conditioners made by Toshiba Carrier Corporation or alternatively he or she has been instructed in such matters by an individual or individuals who have been trained and is thus thoroughly acquainted with the knowledge related to this work The qualified service person who is allowed to work at heights has been trained in matters relating to working at heights with the air conditioners made by Toshiba Carrier Corporation or alternatively he or she has been instructed in such matters by an individual or individuals who have been trained and is thus thorou
187. the type of refrigerator oil of the existing air conditioner is other than the following oil Mineral oil Suniso Freol S MS Synthetic oil alkyl benzene HAB Barrel freeze ester series PVE only of ether series The winding insulation of the compressor may deteriorate NOTE The above descriptions are results have been confirmed by our company and represent our views on our air conditioners but do not guarantee the use of the existing pipes of air conditioners that have adopted R410A in other companies q Curing of pipes When removing and opening the indoor or outdoor unit for a long time cure the pipes as follows Otherwise rust may be generated when moisture or foreign matter due to condensation enters the pipes The rust cannot be removed by cleaning and new pipes are necessary Placement i location Term Curing manner 1 month or more Pinching Outdoors Less than 1 Pinching or taping Indoors Every time 40 Are there scratches or dents on the existing pipes PE NO Existing pipes Cannot be used Use new pipes NO Is it possible to operate the existing air conditioner Y YES After the existing air conditioner is operated in cooling mode for approx 30 minutes or longer recover the refrigerant For cleaning the pipes and recovering oil Refrigerant recovery Pump down method Y
188. tion may cause an electric shock or fire Use wiring that meets the specifications in the Installation Manual and the stipulations in the local regulations and laws Use of wiring which does not meet the specifications may give rise to electric shocks electrical leakage smoking and or a fire Be sure to connect earth wire Grounding work Incomplete grounding causes an electric shock Do not connect ground wires to gas pipes water pipes and lightning rods or ground wires for telephone wires After completing the repair or relocation work check that the ground wires are connected properly Install a circuit breaker that meets the specifications in the installation manual and the stipulations in the local regulations and laws Install the circuit breaker where it can be easily accessed by the agent When installing the circuit breaker outdoors install one which is designed to be used outdoors Under no circumstances must the power cable be extended Connection trouble in the places where the cable is extended may give rise to smoking and or a fire Test run Before operating the air conditioner after having completed the work check that the electrical control box cover of the indoor unit and valve cover of the outdoor unit are closed and set the circuit breaker to the ON position You may receive an electric shock etc if the power is turned on without first conducting these checks When you have noticed that some kin
189. ts from customers 60 EN 8 24 13 9 40 AM Installation location A WARNING Install the outdoor unit properly in a location that is durable enough to support the weight of the outdoor unit Insufficient durability may cause the outdoor unit to fall which may result in injury NCAUTION Do not install the outdoor unit in a location that is subject to combustible gas leaks Accumulation of combustible gas around the outdoor unit may cause a fire Install the outdoor unit in a location that meets the following conditions after the customer s consent is obtained A well ventilated location free from obstacles near the air intakes and air discharge Alocation that is not exposed to rain or direct sunlight Alocation that does not increase the operating noise or vibration of the outdoor unit Alocation that does not produce any drainage problems from discharged water Do not install the outdoor unit in the following locations Alocation with a saline atmosphere coastal area or one that is full of sulfide gas hot spring area Special maintenance is required A location subject to oil vapor oily smoke or corrosive gases A location in which organic solvent is used Places where iron or other metal dust is present If iron or other metal dust adheres to or collects on the interior of the air conditioner it may spontaneously combust and start a fire A location where high frequency equipme
190. uos ya formados y que por lo anto tienen un conocimiento extenso relacionado con estas operaciones La persona de mantenimiento cualificada con permiso para realizar el trabajo el ctrico de la instalaci n reparaci n recolocaci n y desecho tiene las cualificaciones correspondientes a este trabajo el ctrico seg n lo estipulan las leyes y las normas locales y l o ella es una persona que ha sido formada en temas relacionados con el trabajo el ctrico de los aparatos de aire acondicionado abricados por Toshiba Carrier Corporation o en otro caso l o ella han recibido instrucciones para realizar tales trabajos de un individuo o individuos ya formados y que por lo tanto tienen un Persona de conocimiento extenso relacionado con este trabajo mantenimiento E s A cualificada La persona de mantenimiento cualificada con permiso para realizar el trabajo de manejo del refrigerante y de los tubos durante la instalaci n reparaci n recolocaci n y desecho tiene las cualificaciones correspondientes a este trabajo de manejo del refrigerante y de los tubos seg n lo estipulan las leyes y las normas locales y l o ella es una persona que ha sido formada en temas relacionados con el trabajo de manejo del refrigerante y de los tubos de los aparatos de aire acondicionado fabricados por Toshiba Carrier Corporation o en otro caso l o ella han recibido instrucciones para realizar tales trabajos de un individuo o individuos ya formados y que
191. va TO O
192. van de unit niet aanraken Dat zou tot ernstige verwondingen kunnen leiden CAUTION BURST HAZARD Open the service valves before the operation otherwise there might be the burst LET OP GEVAAR VOOR UITBARSTING Open voor enige ingreep eerst de veiligheidskleppen anders kan er een uitbarsting volgen 1115150101 EN indd 21 21 1 Veiligheidsvoorzorgen De fabrikant aanvaardt geen enkele aansprakelijkheid voor schade die veroorzaakt wordt door het niet opvolgen van de aanwijzingen in deze handleiding AN WAARSCHUWING Algemeen Alvorens u begint met installeren van de airconditioner leest u de installatiehandleiding aandachtig door en volgt u alle aanwijzingen daarin voor de installatie van de airconditioner Alleen een bevoegd installateur 1 of bevoegd onderhoudsmonteur 1 mag de airconditioner installeren Als het installeren van de airconditioner wordt verricht door een onbevoegde kan dat leiden tot gevaar voor brand elektrische schokken verwondingen waterlekkage bijgeluiden en of trillingen Gebruik voor het bijvullen of vervangen geen ander koelmiddel dan het daarvoor gespecificeerde koelmiddel Er wordt anders namelijk mogelijk abnormale hoge druk in de koelcyclus opgebouwd met een onjuiste werking ontploffing of lichamelijk letsel als gevolg Gebruik een vorkheftruck om de airconditioner te verplaatsen of verplaats de airconditioner met minstens 2 personen wanneer deze met de hand v
193. vant de d brancher le tuyau de r frig rant La d connexion du tuyau de r frig rant alors que la soupape de service est rest e ouverte et que le compresseur fonctionne encore provoquera une aspiration d air etc ce qui augmente la pression dans le cycle de r frig ration un niveau anormalement lev d o la possibilit d une rupture d une blessure etc 1 Reportez vous D finition d installateur qualifi ou technicien d entretien qualifi NATTENTION Installation du climatiseur nouveau fluide frigorig ne Ce climatiseur utilise le nouveau r frig rant HFC R410A qui ne d truit pas la couche d ozone Le r frig rant R410A est sensible aux impuret s l oxydation des membranes et aux huiles du fait que la pression du R410A est environ 1 6 fois celle du R22 Avec l adoption du nouveau r frig rant l huile r frig rante a aussi t chang e Pendant les travaux d installation il faut donc vous assurer que de l eau de la poussi re de l ancien r frig rant ou de l huile r frig rante ne p n tre pas dans le cycle du climatiseur nouveau type de refrigerant R410A Afin d viter le m lange de r frig rant ou d huile r frig rante les tailles des sections de connexion de l orifice de charge sur l unit principale et les outils d installation sont diff rents de ceux des unit s r frig rant traditionnel En cons quence un outillage sp cifique est n cessaire pour s accommoder du r
194. w the 2 35 9 m 35 density limit of 0 3 kg m countermeasures not needed o N N o Range above the density limit of 0 3 kg m countermeasures needed a o a Min indoor floor area 10 20 30 Total amount of refrigerant kg 83 EN 84 EN 42 1115150101_EN indd 42 8 24 13 9 40 AM TOSHIBA CARRIER THAILAND CO LT D 144 9 Moo 5 Bangkadi Industrial Park Tivanon Road Amphur Muang Pathumthani 12000 Thailand 1115150101 1115150101_cover indd C2 8 24 13 9 39 AM
195. with the cabinet or fan It is recommended to procure an anti freeze heater locally in order to safely install the air conditioner For details contact the dealer 64 EN 8 24 13 9 40 AM 5 Refrigerant piping B Optional installation parts Locally procured Parts name Q ty Refrigerant piping A Liquid side 06 4 9 5 mm Gas side 012 7 15 9 mm Pipe insulating material 1 polyethylene foam 6 mm thick C Putty PVC tape One each One each E Refrigerant piping connection N CAUTION Take note of these 4 important points below for piping work 1 Keep dust and moisture away from inside the connecting pipes 2 Tightly connect the connection between pipes and the unit Evacuate the air in the connecting pipes using a e Flaring 1 Cut the pipe with a pipe cutter Be sure to remove burrs that may cause a gas leak 2 Insert a flare nut into the pipe and then flare the pipe Use the flare nuts supplied with the air conditioner or those for R410A Insert a flare nut into the pipe and flare the pipe As the flaring sizes of R410A differ from those of refrigerant R22 the flare tools newly manufactured for R410A are recommended However the conventional tools can be used by adjusting the projection margin of the copper pipe Projection margin in flaring B Unit mm B Y ale Rigid Clutch type
196. ype dat geschikt is voor buitengebruik Onder geen voorwaarde mag het netsnoer worden verlengd Aansluitproblemen op een plaats waar het netsnoer is verlengd kunnen leiden tot rookontwikkeling en of brandgevaar Proefdraaien Nadat u de werkzaamheden hebt voltooid dient u voor het inschakelen van de airconditioner eerst te controleren of het deksel van de elektrische controlekast van de binnenunit en de klepafdekking van de buitenunit zijn gesloten om vervolgens de stroomonderbreker in de ON stand AAN te zetten Als u de stroom inschakelt zonder eerst deze punten te controleren kunt u een elektrische schok krijgen Als u merkt dat er iets mis is met de airconditioner wanneer u een foutmelding ziet of een schroeilucht ruikt vreemde geluiden hoort of wanneer de airconditioner niet koelt of verwarmt of wanneer er water uit lekt raakt u dan zelf de airconditioner niet aan maar zet u de stroomonderbreker in de OFF stand en neemt u contact op met een bevoegd onderhoudsmonteur Neem de nodige maatregelen om te voorkomen dat het apparaat wordt ingeschakeld schrijf bijvoorbeeld buiten gebruik dicht bij de stroomonderbreker tot de bevoegde onderhoudsmonteur arriveert Als de airconditioner in gebruik blijft terwijl er iets mis mee is kan dat leiden tot ernstige mechanische problemen en gevaar voor een elektrische schok e d Gebruik na be indiging van het werk een isolatietester 500 V Megger om te controleren of de weerstand 1 MQ of meer
197. z besch digt ist das Au enger t selbst nicht anr hren sondern den Schutzschalter ausschalten und einen Kundendienstfachmann 1 rufen Stellen Sie den Schutzschalter erst wieder auf die Position ON ein nachdem die Reparaturen abgeschlossen wurden Nach Abschluss der Installationsarbeiten erl utern Sie dem Kunden die Verwendung und Wartung des Ger ts entsprechend dem Benutzerhandbuch Umsetzung Nur ein qualifizierter Installateur 1 oder ein qualifizierter Servicetechniker 1 darf die Klimaanlage umsetzen Es ist gef hrlich wenn die Klimaanlage durch einen nicht qualifizierten Benutzer umgesetzt wird da es zu Br nden elektrischen Schl gen Verletzungen Wasseraustritten Ger uschen und oder Vibrationen kommen kann Schlie en Sie beim Durchf hren der Abpumparbeiten zuerst den Kompressor bevor Sie das K ltemittelrohr trennen Sollte das K ltemittelrohr getrennt werden obwohl das Serviceventil ge ffnet ist und der Kompressor noch l uft kommt es zum Einsaugen von Luft oder anderen Stoffen wodurch der Druck im Inneren des K hlkreislaufs auf einen anormal hohen Pegel steigt und es in der Folge zu Verletzungen und Besch digungen kommen kann 1 Siehe Definition der Bezeichnung Qualifizierter Installateur oder Qualifizierter Servicetechniker N VORSICHT Installation eines Klimager ts mit neuartigem K ltemittel Dieses Klimager t arbeitet mit dem neuen HFC K ltemittel R410A welches die Ozonschicht nicht ang

Download Pdf Manuals

Related Search

Related Contents

TKG DG 1000  History Module Service - Honeywell Process Solutions  Bedienungsanleitung  Remote Printer Management Utility  取扱説明書 拡散反射型 光電センサー 背景抑制機能付 O6H3xx  Módulo de expansión Mitel M680i  Accu-Chek Tender Link  Home Theater 5.1 com DVD / FM / USB      

Copyright © All rights reserved. Failed to retrieve file