Code Alarm F60 Specifications
Contents
1. auas 9 OVIA aNnOHD g foau iatie agava v UHWxOVIS NALNO LHO AMOO tamatanainouoronsoot z GUHA andino HOF ONDYE b Car Start Hamess ey Bo PEP ET A e tx EXTENDEDRANGE IMPORTANT The module MUST be programmed before it will operate mi Wire End View Refer to the programming instructions on pages 13 16 mre oa 973014 12 14 PM 12 101101 4 F60 65 p65 Programming Selectable Options 13 Note Transmitters must be programmed prior to these steps Press to Press to reset turn feature ail options to on or off factory defaults DISARM TRYKK ARM fees DISARM H FIND PANIC Pressto P advance to next feature 1 Repeat steps 1 4 of Adding Remote Controls to your System page 9 2 Press and release the emergency override button The horn will sound four 4 times This indicates that the unit has entered the Keyless Options Programming mode 3 Press the Find Panic button to advance to the next feature The horn will sound a number of times to indicate the number of the option 4 Press the Arm bution to turn the option on or off The vehicle status indicator on the dashboard indicates whether an option is on or off If the selected option is ON the indicator will light if the selected option is OFF the indicator wili turn off The status indicator will turn on or off when an option is changed 5 When changes are2. How to file a request for payment If the above conditions are met make your request for payment by submitting the following to CODE The request for payment must be received by CODE no later than sixty 60 days after the vehicle is reported stolen Copy of the retail sales receipt for the purchase of the security system clearing showing the model of system purchased and the year make and model of the vehicle in which the system was installed 2 A copy of the police report for the stolen vehicle 3 A copy of the paid insurance claim and reimbursement check from the insurance company Send the above items to CODE by certified mail at the following address CODE ALARM INC Consumer Affairs Department 950 E Whitcomb Madison Heights MI 48071 1 800 421 3209 101101 4 F60 65 p65 17 9 13 01 12 14 PM
3. 65 p65 3 9 1301 12 14 PM 4 Using Your Remote Transmitter Press to DISARM S curity_ System and Unlock Doors Press to ARM the e a Pross TWICE for Two Slage Security System and BISARN Door Unlock TRUAK Lock the Doors Press and Hold to Open Trunk Press START to start Press for Car Finder the vehicle Press and Hold for Panic Alarm Arming the Security System To arm the system exit the vehicle close al doors then press the ARM button The horn will chirp twicet and the parking lights will flash twice indicating the system is armed The doors will also lock at this time if equipped and connected The status indicator red warning light on the dash will blink steadily once per second Pre arm Mode If the horn chirps and the parking lights flash only once this indicates that the vehicle courtesy light is on or that an entrance is not closed securely Check to see that doors hood and trunk are properly closed Once all entrances are secured and the courtesy light is off the system will chirp flash again The system is now fully armed If the entrance is not secured within 4 minutes the system will arm and ignore the unsecured entrance until it is closed Disarming the Security System To disarm the system press the DISARM button The horn will chirp and the parking lights will flash once and the doors will unlock The courtesy light will turn on for 1 minute or until the vehicle is st
4. Before exiting the vehicle set the temperature controls to the desired setting and operation After the F60 F6 starts the vehicle the heater or air conditioning will activate and heat or cool the interior to your setting Using the Quick stop Feature If you want to make a short stop and leave your vehicle running to keep the interior warm or cool for instance the quick stop feature allows you to do this while keeping your vehicle secure and your keys with you To engage quick stop 1 While vehicle is running place the transmission in PARK 2 With your foot off the brake pedal press and hold the START button on the remote control The parking lights will turn on indicating that the vehicle is now running via remote start 3 Remove the keys from the ignition and exit the vehicle Press ARM to arm the alarm system if desired Noie Do not leave children or animals unattended in the vehicle when using the quick stop feature The tach wire must be connected and the system must be in tach monitor mode 401101 4 F60 65 p65 T 9 43 01 12 14 PM eee 8 Automatic Convenience Options The F60 F65 performs a variety of automatic functions to enhance security and comfort Some of these features are programmable at the time of installation Please see your installer for further details illuminated Entry When the alarm system is disarmed the vehicle courtesy lights will turn on for 1 minute or until the vehicle is start
5. Emergency Disarm Button is located Installer Programmed Options Ignition On Door Lock ON OFF Ignition Off Door Unlock ON OFF liiuminated Entry Exit ON OFF Hom Chirps ON OFF Passive Arming ON OFF Passive Door Locks ON OFF Car Start Run Time 12 min 25 min FCC COMPLIANCE This device complies with Part 15 of the FCC rules and with RSS 210 of Industry Canada Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including any interference that may cause undesired operation Warning Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment e a 101101 4 F60 65 p65 u 9 43 01 12 14 PM System Layout 12 roviaanTa no aALLOY oF GunaOMHOW 6 AWONA Aaays WALIN umoualayvaa aasnNn o aasnnn s Gonvuo LOVAH Gunna NOUINOL oau uaiive z ENNA NAAHOINIA NDOTINN HOOD ON0938 VZ INFOM xora Loze inroma anuz anze oa bovanmoua vwoos EI NKYSIOAUOLOVA IE ener ITS USTOUNEaHO LAM YIDOML H000 oF AvWO LNdNi Nid COOH EL LONNONO NOLING SOHYYTAO MVS koma aNnoUo LneNINOLINa BOMIHIAO WUYSIO 1 GOW ariv LH ne aasi s NgauO LNALNO YOLONNIOTINN gt t NVLHLNALNO HOLONINNH OISANNEL GasnNN HL assonnor ansann 6 GoW uoLoW tans e DANIAE anaLNOZUNANT t NOLINOI foawasT0IW
6. ce Keyless Options Doorslockwhenaldoorsareciosedand ignition is turned on 2 Delayed Door Lock 3 sec delay locking for theater dimming ON OFF 3 Extended Locks Lock duration is 1 5 sec or 2 0 6 sec ot OFF 2 4 Unlock with Ignition Doors unlock when ignition is turned off ON OFF 5 Double Unlock Pulse Unit provides two pulses on each unlock ON OF 6 Confirmation Chimps 1 Yes 2 No confirmation chirps ON 1 OFF 27 7 Silent Choice 1 By Pressing LOCK o r UNLOCK twice manual ON 1 OFF 2 ON t OFA 1 ReaPeribem Output Randompised2 Seadypubectoupu BOE 2 PassiveStarterKill Engagesstarterkilafteroneminute N OFF 3 Passive Arming gt Agmautomatcally arms 60sec lt QW OFF 4 PassiveDoorLocks A OFF 5 NoseContol gt lt ON RA 1 TachMode 1 Use blind crank timing 2 Use tach input ON 1 OFF 2 2 Blind Crank Time 1 Avg of last 8 manual starts 2 1 5 sec ON 1 lt OFF 2 3 RunTime 1 25 minutes 2 12 minutes ON i OFF 2 iese Mode Start crank begins 1 15 sec oF i EAERI i UNER 2 2 sec after ignition turns on Feith E 5 Doors Lock After Start Relocks doors after start command N OF 6 Door Trigger Delay t4 Door trigger ignored 60sec after start ON 1 OFF 2 eee 2 Door trigger always active eye 1 Door Trigger Polarity 1 Positive 2 Negative s OFF 2 External Start Trig
7. complete press and release the emergency override button to continue to the next option bank Horn will sound five 5 times 6 To reset ail options back to factory defaults press the Unlock Disarm button Note Option Bank four 4 Installer Options will never reset 7 Turn ignition off to exit programming See Options Chart on page 15 101101 4 F60 65 p65 13 943 01 12 14 PM 14 Programming Selectable Options cont d Adjusting the Onboard IT s Interior Theft Sensor The IT s is factory pre set at a moderate sensitivity level and has two adjustment points Lite Touch and Full Shock gt Adjusting Lite Touch Sensitivity To program the sensitivity of the lite touch trigger simply enter into the installer options bank then advance to the Lite Touch Adjustment Once in the Lite Touch Adjustment option use the ARM button of the transmitter to increase and the DISARM button to decrease the sensitivity 2 To verify the sensitivity strike the vehicle while in programming with the amount of force you feel is acceptable for a lite touch trigger If the system chirps it will recognize that force otherwise increase or decrease to obtain proper sensitivity P gt Adjusting Full Shock Sensitivity To program the sensitivity of the full trigger simply enter into the installer options bank then advance to Ful Shock Adjustment Once in the Full Shock Adjustment option use the ARM button of the transmitter to inc
8. the ARM button The red dashboard warning light status indicator will turn on for one second then turn off This indicates that the system is in Valet mode Once the ignition is turned off the status indicator will emit a quick double flash pattern Note In Valet mode all keyless entry convenience and remote start features operate normally To exit Valet Mode With the vehicle ignition on press the DISARM button The red dashboard warning light status indicator will turn on for one second then turn off This indicates that the system has exited Valet mode Hint To prevent your security system from automatically arming while unloading or refueling your vehicle without placing the system in Valet mode simply press the disarm button on your remote control transmitter after turning the ignition key off Doing so places your system into a temporary or onetime Valet mode Next time you exit your vehicle the system will arm in the normal manner Using Your Remote Starter Starting Your Vehicle The remote start function is activated by pressing and holding the START button on the remote control The system will check the vehicle to ensure that it is safe to start and if all safety parameters are correct the engine will start within 5 seconds diesel engines will take longer Press and hold START again to turn the vehicle off If your vehicle stalls or does not start If the vehicle stalls or does not start the F60 F65 w
9. this feature is enabled on your system pressing DISARM one time will unlock only the drivers door Press DISARM again within 1 minute to unlock all doors Activating the Trunk Release Feature Press and hold TRUNK to open the vehicle trunk or hatch if equipped and connected If this button is used to operate another accessory the accessory will stay active for as long as the button is held Using the Car Finder Feature Press FIND on the remote control to locate your vehicle The horn will emit five short chirps Personal Protection Alarm Panic Press and hold the PANIC button to activate the vehicle horn and parking lights for 30 seconds If the vehicle horn is connected the hom will pulse for 30 seconds Press any remote contro button to turn off the Panic alarm Remote Start Stop Feature Press and hold the START button on the remote control if all safety parameters are correct the engine will start within 5 seconds diesel engines will take longer Press and hold the START button again to turn the vehicle off Turn to page 6 for more on remote start features 101101 4 F60 65 p65 5 IVN 12 14 PM 6 Using Your Remote Transmitter cont Using Valet Mode If the Passive Arming feature is enabled on your system Valet mode temporarily prevents the alarm system from arming automatically This is useful when fueling or servicing your vehicle To enter Valet Mode With the vehicle ignition on press
10. F60 F65 Remote Vehicle Control System Nad Car Start Security and Convenience System IMPORTANT NOTE The operation of the F60 F65 as described in this manual is applicable to most vehicles However due to the engine type and configuration of some vehicles i e diesel engines some functions AND OR SAFETY PRECAUTIONS may not apply Please see your 101101 4 installing dealer for more information 9 01 101301 4 F60 65 p65 1 SNYO1 12 14 PM i 2 Table of Contents Features and Benefits of the F60 F65 ssecssssssecnsereseneereees 4 Using Your Remote Transmitter cssscssesesssecsseesrenserscsnsneerseee 5 Arming the Security System Pre arm Mode Disarming the Security System Attempted Intrusion Identification Disabling the IT s Interior Theft Sensor EENIA i Two Stage Door Unlock Activating the Trunk Release Feature Turning on the Vehicle Headlights Using the Car Finder Feature Personal Protection Alarm Panic Remote Start Stop Feature Using Valet Mode Using Your Remote Starter scsssssscssssscsssseecsssssenesssssersnsseeee 7 Starting Your Vehicle if your vehicle stalls or does not start Remote Start Safety Features Entering the Vehicle While it is Running via Remote Start Pre Heating or Pre Cooling the Interior of the Vehicle Using the Quick stop Feature Automatic Convenience Options s s sssssserssssesseseseeerenes 7 When Your Security Syst
11. ansmitters exclusive of the transmitter case are warranted by CODE to the original retail consumer purchaser to be free from defects in workmanship and materials for the lifetime of the of the vehicle in which the security system was originally installed Switches indicator lights and transmitter cases are warranted to the original consumer purchaser for a period of one 1 year from the date of purchase when the system is installed by an authorized CODE dealer Switches indicator lights and transmitter cases are warranted to the original consumer purchaser for a period ot ninety 90 days from the date of purchase when the system is installed by a party other than an authorized CODE dealer Security system accessories are covered by the warranty supplied with the accessory Wiring harnesses altered by installation and transmitter batteries are not covered by this or any other warranty This warranty is non transferable non assignable and is completely voided when the security system is removed from the car in which it was originally installed If the vehicle in which the security system was originally instalied In Is transferred to another party this warranty no longer applies This warranty does not apply to any product damaged by accident physical or electrical abuse improper installation alteration any use contrary to its intended function unauthorized service i e service by anyone other than CODE or its authorized service perso
12. arted Attempted Intrusion Identification lf the hom chirps four times when disarming this indicates that the system was triggered in your absence The status indicator will also flash rapidly Perform the following operation to determine the protected zone that triggered the system After disarming press the emergency override button The horn will chirp to indicate 3 chirps Hood the cause of the alarm trigger 4 chirps Trunk Optional Sensors 5 chirps Ignition was turned on 1 chirp IT s interior Theft Sensor 2 chirps Door Throughout this manual press refers to pressing forless than 1 second press and hold refers to pressing for more than 1 second Ifyou have chosen the Silent Arming Option the horn will not sound when arming or disarming until the appropriate buttonis pressed a second time 401101 4 F60 65 p65 4 913 01 12 14 PM Using Your Remote Transmitter cont Disabling the IT s Interior Theft Sensor It may be necessary at times to disable the IT s Interior Theft Sensor especially when parking in areas like parking garages where extreme vibration may cause false alarms Press the ARM button and then press the FIND PANIC button within two seconds of pressing ARM to disable the interior theft sensor The horn will chirp three times to indicate that the sensor is disabled The sensor will become enabled again the next time the system is armed normally Two Stage Door Unlock If
13. at least 1 seconds in between each press Make sure that the horn chirps each time you press the ARM button 4 Turn the vehicle ignition off to exit the programming mode When you are finished the lost or stolen remote control will no longer operate your system Basic Troubleshooting This section outlines some of the basic issues you may experience while becoming used to the F60 F65 If you have a problem that is not covered by this section please consult your installer Symptom Problem Solution Weak or dead battery Change battery Remote control does not work Program remote control page 9 Remote control not programmed Door or other Close entrance entrance is open System will not arm Courtesy light is on Turn courtesy light off Turn off Valet mode page 6 Close hood System is in Valet mode Hood is open System will not start Release brake Brake is pressed 101101 4 F60 65 p65 10 9 13 01 12 14 PM Emergency Disarm Procedure 11 If your remote control is lost or fails to function use this procedure to disarm the F60 F65 and start your vehicle 1 Use the keys to enter the vehicle The alarm will sound once the door is opened 2 Insert the key into the ignition and turn to the ON position 3 Locate and press the emergency override button i The alarm will turn off and then you will be able to start your vehicle Your
14. e CODE has created this program as a way of showing appreciation to its customers CODE RESERVES THE RIGHT TO UNILATERALLY CHANGE ALTER MODIFY OR DISCONTINUE ALL OR PART OF THIS THEFT PROTECTION PROGRAM WITHOUT PRIOR NOTICE THIS THEFT PROTECTION PROGRAM IS NOT AN INSURANCE POLICY AND SHOULD NOT REPLACE AN AUTOMO BILE OR HOMEOWNERS INSURANCE POLICY THIS THEFT PRO TECTION PROGRAM DOES NOT COVER LOSSES ARISING FROM THE THEFT OF ITEMS WITHIN THE AUTOMOBILE OR ANY DAM AGES ARISING FROM RELEATED TO AND OR INCIDENTAL OR A CONSEQUENCE OF A VEHICLE THEFT EXCEPT AS SPECIFICALLY DELINEATED BELOW Plan duration 3 Years from the date of installation Plan amount F60 F65 enseres up to 2500 00 Conditions of the Theft Protection Program The Theft Protection Program is non transferable and non assignable k The system must be installed by an authorized CODE dealer 3 Vehicle must be less than three 3 model years old at the time of installation 4 The security system must have been fully armed at the time of the vehicle theft 5 The vehicle in which the system is installed must be insured for theft by a licensed insurance underwriter in the state in which the vehicle is registered Terms of payment 1 The vehicle must first be considered a total loss due to theft by your Insurance company 2 Your insurance company has settled all claims arising from this theft and there are no other pending legal actions as a result of this theft
15. ed or the system is re armed Automatic Arming The F60 F65 will arm automatically 1 minute after the ignition is turned off This feature can be temporarily disabled by placing the system into Valet mode Ignition Lock If all doors are closed and the vehicle is started with the key the doors will automatically lock Ignition Unlock The doors will automatically unlock after the ignition is tumed off When Your Security System is Triggered The F60 F65 will trigger if one of the following events occurs while the system is armed Any protected entrance is opened The vehicle ignition is turned on e The vehicle is jolted hard enough to signal the impact detector Once the alarm is triggered the horn or horn sounds and the vehicle parking lights flash for 30 seconds The system will then re arm awaiting the next intrusion attempt To stop the horn while keeping the alarm armed and doors locked press the ARM button while the system is triggered The Interior Status Indicator The Status Indicator is a high intensity red light mounted in a visible location on the vehicle dashboard This red light gives a visual indication of the alarm system s state of operation Note the chart below if the Status Indicatoris _ then the Security System Of i is disarmed Flashing Slowly is armed Flashing Very Quickly was triggered in your absence see Attempted Intrusion ID page 4 Flashing Intermittently is in Valet
16. em is Triggered ccsssssccesssssseseee 8 i The Interior Status indicator scccssceecssssecrnseccesersesserserttes 8 System MAMONA CE aisian aoaaa ia 9 Changing the Remote Control Battery Adding Remote Controls to Your System Deleting Lost or Stolen Remote Controls from Your System Basic Troubleshooting csccsssscesssessessssccsesssssesensesersesesetsenseses 10 Emergency Disarm Procedure Emergency Disarm Button Location System Layout ccccssessesssssssnscsersesssnseresseersssesssseeennersrenes 12 Programming Selectable Options ssccssssserssessssessseraranenes 13 Code Alarm Warranty Plan sesssssssssossssessnseosseonosseonossonnonasssssars 17 Code Alarm Theft Protection Plan ssssscsssssssenrerstseseseses 18 101401 4 F60 65 p65 2 91801 12 14 PM Features and Benefits of the F60 F65 Two Easy to Use Weather Resistant Remote Controls The remote controls included with the F60 F65 utilize durable moisture resistant cases and sealed rubber buttons for reliability and long life Rolling code technology prevents the transmitter signals from being duplicated The button functions are clearly labeled to make the F60 F65 simple to operate JI Entrances Protected Opening any door or entrance protected by the security system triggers the vehicle s horn and flashes the vehicle parking lights Starter Disable The F60 F65 protects your vehicle from theft by disabling the starter when t
17. ger 1 Positive 2 Negative ON 1 OFF 2 3 Neutral Safety Input 1 Positive 2 Negative ON 1 OFF 2 4 Light Touch adj ARM raises sensitivity DISARM lowers sensitivity ON OFF 5 Full Shock adj ARM raises sensitivity DISARM lowers sensitivity ON OFF 6 Tach Programming Hood open Start leam ON OFF 101101 4 F60 65 p65 15 9743 01 12 14 PM i i L l 16 CODE ALARM INC 3 YEAR WARRANTY ACODE ALARIM INC CODE vehicle security system sold to a retail consumer purchaser by an authorized dealer of CODE and installed by an authorized dealer of CODE is warranted by CODE to the original retail consumer purchaser to be free from defects in workmanship and materials for the lifetime of the vehicle in which the security system was originally installed A CODE vehicle security system sold to a retail consumer purchaser by an authorized dealer of CODE and installed by a party other than an authorized dealer of CODE is warranted by CODE to the original retail consumer purchaser to be free from defects in workmanship and materials for a period of ninety 90 days Defects caused by or related to the improper installation of the security system are not covered by this or any other warranty The duration of this warranty described above applies to all components of the security system except for switches indicator lights transmitter s and accessories purchased separately Tr
18. he system is armed IT s Interior Theft Sensor This patented sensor uses infra red technology to reliably detect vehicle impact associated with attempted intrusion The IT s sensor guards against vehicle body damage and theft of the vehicle s equipment such as airbags and persona belongings 2 Remote Keyless Entry The F60 F65 conveniently locks and unlocks vehicle doors and opens the trunk or hatch by remote control Personal Protection Features Remote Panic Alarm illuminated Entry and Car Finder are among an array of features that enhance personal safety 3i Interior Status Indicator The bright red warning fight is an effective visual deterrent to a would be thief Remote Start The F60 F65 allows you to warm up your vehicle and preheat or pre coo the interior with the press of a button on the remote control E E Ei PowerRange Antenna This long range antenna allows you to operate the F60 F65 from Ys distances of up to mile Remote start your vehicle from the safety of your home apartment or office building If vehicle is equipped with power door locks and they are connected to the alarm system by your installer May require additional connections components and or charges See your installer for details Range results may vary due to atmospheric conditions and or the presence of strong radio frequency signals Specifications may change without prior notice 101101 4 F60
19. ill pause 5 seconds then try 3 more times to start the vehicle a total of four attempts The system pauses 5 seconds between each start attempt If the vehicle does not start after the fourth attempt the F60 F65 will abort the start process Your vehicle can be started by remote control whether the alarm is armed or disarmed When the alarm is armed the impact sensor turns off when the vehicle is started to prevent the engine vibration from setting off the alarm 101101 4 F60 65 p65 6 971801 12 14 PM f Using Your Remote Starter cont d Remote Start Safety Features For safety and security reasons the F60 F65 will shut off the vehicle during remote start if any of the following occur e The vehicle hood is opened e The brake is pressed before the vehicle ignition is turned on with the key e The engine reaches 3 times its normal idle The alarm is triggered As a safety precaution the vehicle will shut off if left unattended for 12 or 25 minutes depending on the time preset by your installer Entering the Vehicle While It is Running via Remote Start 1 Press DISARM to unlock the door s and turn off the alarm system if it is not already off 2 Enter the vehicle Do not press the brake pedal 3 Insert the key into the ignition and turn to the ON position 4 Press the brake pedal The remote starter disengages and the vehicle will operate normally Pre Heating or Pre Cooling the Interior of the Vehicle
20. mode 2 flashes off 2 flashes i On not flashing is in Pre arm mode 101101 4 F60 65 p65 8 913 01 12 14 PM eter System Maintenance 9 Changing the Remote Control Battery The 12 volt alkaline battery supplied in your remote transmitter should last approximately one year depending on usage When the battery begins to weaken you will notice a decrease in range or the distance from your vehicle that your remote f transmitter will operate Follow the instructions below to change the remote transmitter battery Open Back of emote Transmitter i Re 1 Using a coin pry off the back of the transmitter the transmitter snaps together and expose the battery 2 Remove the old battery and replace with GP 23A or equivalent Be sure to observe the and signs in the battery compartment 3 Replace the case backing then test the remote transmitter It is not necessary to re program the remote transmitter after changing the battery Adding Remote Controls to Your System The F60 F65 has the ability to operate from up to eight 8 remote controls Follow these instructions to add a remote control to your system 1 2 Open the driver s door 3 4 Press and hold emergency override button Make sure the system is disarmed and the ignition is off Turn vehicle ignition on After 15 seconds the horn will sound three 3 times This indicates that the unit has entered the remote contro p
21. nnel fire flood Jightning or other acts of God Should a product be found to be defective during the warranty duration CODE will repair or replace the product or any part of the product that CODE agrees is defective without charge to the retail consumer purchaser of the product during the first year of the warranty period After the first year of the warranty period has expired CODE will repair or replace the product or any part of the product that CODE agrees is defective for a fee of 10 00 to cover shipping and handling charges In order for a product to be repaired or replaced under the terms of this warranty the defective product must be returned to an authorized CODE dealer and accompanied by a copy of the original retail sales receipt The date of purchase and year make and model of the vehicle in which the security system was originally installed in must be clearly indicated on the sales receipt CODE shall not be held responsible for any removal and or reinstallation charges of a defective product damage to or theft of the vehicle or its contents or any incidental or consequential damages caused by any failure of the product to function properly Under no circumstances should this warranty or product covered by it be construed as an insurance policy against loss CODE neither assumes nor authorizes any person or organization to make ANY WARRANTIES or assume any liability in connection with the sale installation or use of this prod
22. rease and the DISARM button to decrease sensitivity 2 To verify the sensitivity strike the vehicle while in programming with the amount of force you feel is acceptable for a full trigger If the system chirps it will recognize that force otherwise increase or decrease to obtain proper sensitivity Note There are 64 levels of adjustment in each option Once the highest lowest sensitivity is acheived the horn will sound an extended i pulse indicating that you are at the end of the scale Upon i decreasing sensitivity one more step from the lowest end of the scale the horn will chirp 3 times and the zone will shut off H Ti a Programming the Tach Signal Note Skip this step if the vehicle does not have a tach wire or if this unit will be programmed to operate without connection to the tach wire 1 Open the vehicle hood hood pin switch must be installed to program tach 2 Following the steps in Section C Programming Selectable Options access Option Bank 4 Feature 6 3 Start the vehicle with the key and allow the engine to come to a normal idle 5 10 seconds The unit will chirp the horn and flash the parking lights every three 3 seconds to indicate that it has learned the current idle speed seenen 101101 4 F60 65 p6S 14 9 13 01 12 14 PM Programming Selectable Options cont d 15 Programmable Options Chart Default settings in BOLD OPTION DESCRIPTION Option Bankd seh
23. rogramming mode Release the button Press the ARM button button 1 on the remote control to be programmed The horn will sound once indicating that the system has learned that remote control Repeat step 6 for any additional remote controls Turn the vehicle ignition off to exit the programming mode Test all remote controls to ensure that they work properly 101101 4 F60 65 p65 9 9 13 01 12 14 PM 10 System Maintenance cont Deleting Lost or Stolen Remote Controls from Your System If one of your remote controls is lost or stolen follow these instructions IMMEDIATELY to remove the control code from your system 1 Have all remaining remote controls available 2 Enter the control programming mode by following steps 1 5 of Adding Remote Controls to Your System page 8 3a If you have only one remaining remote control press the ARM button on that remote control eight 8 times pausing at least 1 second between each press Make sure that the horn chirps each time you press the ARM button 3b If you have two remaining remote controls press the ARM button on each remote control four 4 times pausing at least 1 second in between each press Make sure that the horn chirps each time you press the ARM button 3c If you have three remaining remote controls press the ARM button on the two remote controls three 3 times then press the ARM button on the remaining remote contro twice Pause
24. uct This is the complete CODE warranty and no other warranty exists The warranty identified in this form is exclusive and CODE makes no other warranties expressed or implied for any goods or services provided by CODE CODE specifically and expressly excludes any other warranties including the fitness for a particular purpose and all warranties of merchantability The customers sole and exclusive remedy for any and all claims against CODE arising out to the customers use of any CODE vehicle security system or component shail be as delineated in the warranty set forth above CODE shall not be liable to any customer or any other person or entity for any direct or indirect consequential special or exemplary damages arising out of or in connection with the customers use of or inability to use or misuse of any CODE provided product Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state 101101 4 F60 65 p65 16 1301 12 14 PM CODE ALAR M INC Theft Protection Plan The Theft Protection Program is designed to provide the retail pur chaser of a security system provided by CODE ALARM INC CODE an additional benefit at no additional cost to the purchaser should their vehicle be stolen while protected by a CODE ALARM security system Whil
Download Pdf Manuals
Related Search