manual - Omron Healthcare India
Contents
1. Automatic Blood Pressure Monitor Model HEM 8712 Instruction Manual 5342183 5A Introduction Thank you for purchasing the OMRON HEM 8712 Automatic Blood Pressure Monitor The OMRON HEM 8712 is a compact fully automatic blood pressure monitor operating on the oscillometric principle It measures your blood pressure and pulse rate simply and quickly For comfortable controlled inflation without the need of pressure pre setting or re inflation the device uses its advanced IntelliSense technology Intended Use This product is designed to measure the blood pressure and pulse rate of people within the range of the designated arm cuff following the instructions in this instruction manual It is mainly designed for general household use Please read the Important Safety Information in this instruction manual before using the unit i Please read this instruction manual thoroughly before using the unit Please keep for future reference For specific information about your own blood pressure CONSULT YOUR DOCTOR Important Safety Information Consult your doctor prior to using in pregnancy or if diagnosed with arrhythmia or arteriosclerosis Please read this section carefully before using the unit A Warning Indicates a potentially hazardous situation which if not avoided could result in death or serious injury General Usage Do not use the device on the injured arm or the arm under medical treatment Do not2. Cuff Tube Material Package Content Note Subject to technical modification without prior notice C 0197 e This device fulfils the provisions of EC directive 93 42 EEC Medical Device Directive e This blood pressure monitor is designed according to the European Standard EN1060 Non invasive sphygmomanometers Part 1 General Requirements and Part 3 Supplementary requirements for electromechanical blood pressure measuring systems e This OMRON product is produced under the strict quality system of OMRON HEALTHCARE Co Ltd Japan The core component for OMRON blood pressure monitors which is the Pressure Sensor is produced in Japan Important information regarding Electro Magnetic Compatibility EMC With the increased number of electronic devices such as PC s and mobile cellular telephones medical devices in use may be susceptible to electromagnetic interference from other devices Electromagnetic interference may result in incorrect operation of the medical device and create a potentially unsafe situation Medical devices should also not interfere with other devices In order to regulate the requirements for EMC Electro Magnetic Compatibility with the aim to prevent unsafe product situations the EN60601 1 2 2007 standard has been implemented This standard defines the levels of immunity to electromagnetic interferences as well as maximum levels of electromagnetic emissions for medical devices This medical device ma
3. Recent research suggests that the following values can be used as a guide to high blood pressure for measurements taken at home Above 135 mmHg Above 85 mmHg This criteria is for home blood pressure measurement Systolic Blood Pressure Diastolic Blood Pressure e Your blood pressure monitor includes an irregular heartbeat feature Irregular heartbeats can influence the results of the measurement The irregular heartbeat algorithm automatically determines if the measurement is usable or needs to be repeated If the measurement results are affected by irregular heartbeats but the result is valid the result is shown together with the irregular heartbeat symbol J If the irregular heartbeats cause the measurement to be invalid no result is shown If the irregular heartbeat symbol W is shown after you have taken a measurement repeat the measurement If the irregular heartbeat symbol is shown frequently please make your doctor aware of it If you move during measurement the movement error symbol ff will appear on the display Keep still and repeat the measurement 3 4 Using the Memory Function The monitor automatically stores the last measurement values blood pressure and pulse rate To View the Readings Stored in Memory 1 Press and hold the START STOP button for more than 5 seconds The last measurement value is displayed along with the memory symbol Notes e If your systolic or d
4. feet flat on the floor e Sit upright with your back straight The arm cuff should be at the same level as your heart 3 3 Taking a Reading Notes e To cancel a measurement press the START STOP button to release the air in the arm cuff e Remain still while taking a measurement 1 Press the START STOP button The arm cuff will start to inflate automatically WSTART WINFLATE WDEFLATE COMPLETE rm m A 5 g 1 A m 8 4 0 If your systolic pressure is more than 210 mmHg After the arm cuff starts to inflate press and hold the START STOP button until the monitor inflates 30 to 40 mmHg higher than your expected systolic pressure Notes The monitor will not inflate above 299 mmHg Do not apply more pressure than necessary Note Wait 2 3 minutes before taking another blood pressure measurement Waiting between readings allows the arteries to return to the condition prior to taking the blood pressure measurement A Always consult your doctor Self diagnosis of measurement results and self treatment are dangerous 2 Remove the arm cuff 3 Press the START STOP button to turn the monitor off The monitor automatically stores the measurement in its memory It will automatically turn off after 2 minutes Important e If your systolic or diastolic pressure is outside the standard range the heartbeat symbol will blink when the measurement result is displayed
5. press the buttons The arm cuff is loose The arm cuff has not been inflated sufficiently The batteries are empty Apply the cuff correctly so that it is firmly wrapped around the arm Refer to section 3 1 Inflate the cuff so that it is 30 to 40 mmHg above your previous measurement result Refer to section 3 3 Replace the batteries with new ones Refer to section 2 1 The batteries have been inserted incorrectly Insert the batteries with the correct polarity Refer to section 2 1 Other problems e Press the START STOP button and repeat measurement If the problem continues try replacing the batteries with new ones If this still does not solve the problem contact your local OMRON representative 4 3 Maintenance To protect your unit from damage please observe the following e Do not subject the main unit and the cuff to extreme temperatures humidity moisture or direct sunlight e Do not fold the cuff or tubing tightly e Do not inflate the arm cuff over 299 mmHg e Do not disassemble the unit e Do not subject the unit to strong shocks or vibrations for example dropping the unit on the floor e Do not use volatile liquids to clean the main unit e Do not wash the arm cuff or immerse it in water e Do not use petrol thinners or similar solvents to clean the arm cuff e Do not carry out repairs of any kind yourself If a defect occurs consult your local OMR
6. wrap the arm cuff on the arm while being on a intravenous drip or blood transfusion AC Adapter optional Usage Do not use the AC adapter if the unit or the power cord is damaged Turn off the power and unplug the power cord immediately e Plug the AC adapter into the appropriate voltage outlet Do not use a multiple tap e Never plug in or unplug the power cord from the electric outlet with wet hands A Caution Indicates a potentially hazardous situation which if not avoided may result in minor or moderate injury to the user or patient or damage to the equipment or other property General Usage e Always consult your doctor Self diagnosis of measurement results and self treatment are dangerous e People with severe blood flow problems or blood disorders should consult a doctor before using the unit as cuff inflation can cause internal bleeding e If there are any abnormalities during the measurement remove the arm cuff e Do not use this device on infants or persons who cannot express their intentions e Do not inflate the arm cuff more than necessary Do not use the unit for any purpose other than measuring blood pressure e Use only the approved arm cuff for this unit Use of other arm cuffs may result in incorrect measurement results Do not use a mobile phone or other devices that emit electromagnetic fields near the unit This may result in incorrect operation of the unit e Do not disassemble the unit or a
7. EMC in the Technical Data Section e Read and follow the Correct Disposal of This Product in the Technical Data Section when disposing of the device and any used accessories or optional parts 1 Overview Main unit 2 y A Display B START STOP button C Battery compartment D AC adapter jack for optional AC adapter E Air Jack Arm cuff F Arm Cuff Arm circumference 22 32 cm G Air plug H Air tube l Marker Display SaO pgi eer J Memory symbol O Irregular heartbeat symbol K Systolic blood pressure P Movement error symbol L Diastolic blood pressure Q Pulse display M Low battery symbol R Deflation symbol N Heartbeat symbol Note If your systolic or diastolic pressure is outside the standard range above 135 85 mmHg 1 Flashes during measurement 2 If flashing after measurement completed ar when viewing the Heartbeat symbol 4 will results stored in the memory blink Please refer to Section indicates blood pressure out of 33 recommended range 2 Preparation 2 1 Installing Replacing the Batteries 1 Remove the battery cover 2 Insert four AA batteries as indicated in the battery compartment and then replace the battery cover Notes If the low battery symbol 4 appears on the display turn the monitor off then replace all batteries at the same time The measurement values continue to be stored in memory eve
8. ON representative YS 22 0 amp 4 e The unit should be cleaned with a soft dry cloth e Use a soft moistened cloth and neutral soap to clean the arm cuff b Note Read and follow the Correct Disposal of This Product in the Technical Data Section when disposing of the device and any used accessories or optional parts Calibration and Service e The accuracy of this blood pressure monitor has been carefully tested and is designed for a long service life e It is generally recommended to have the unit inspected every two years to ensure correct functioning and accuracy Please consult your local OMRON representative 4 4 Storage 1 Unplug the air plug from the air jack 2 Gently fold the air tube into the arm cuff Notes e Do not bend the air tube excessively e Do not store the unit in the following situations If the unit is wet Locations exposed to extreme temperatures humidity direct sunlight dust or corrosive vapours Locations exposed to vibrations shocks or where it will be at an angle 5 Optional Parts Medium Arm Cuff Arm circumference 22 32cm Large Arm Cuff Arm circumference 32 42 cm AC Adapter S of Note Please check with your local OMRON representatives for the appropriate optional part models Using the Optional AC Adapter 1 Insert the AC adapter plug into the AC adapter jack on e D the rear side of the main 1 unit
9. g measurement Refer to section 3 3 If E2 appears repeatedly inflate the cuff manually until it is 30 to 40 mmHg above your previous measurement result Refer to section 3 3 The arm cuff was inflated above 299 mmHg when inflating the cuff manually Do not inflate the cuff above 299 mmHg Refer to section 3 3 Movement during measurement Clothing is interfering with the arm cuff Device error 4 2 Troubleshooting Problem The reading is extremely low or high Arm cuff not applied correctly Movement or talking during measurement Clothing is interfering with the arm cuff Repeat measurement Remain still and do not talk during measurement Refer to section 3 3 Remove any clothing interfering with the arm cuff Refer to section 3 1 Contact your local OMRON representative Apply the arm cuff correctly Refer to section 3 1 Remain still and do not talk during measurement Refer to section 3 3 Remove any clothing interfering with the arm cuff Refer to section 3 1 Arm cuff pressure does not rise The air tube is not securely connected into the main unit Air is leaking from the arm cuff Make sure that the air tube is connected securely Refer to section 3 1 Replace the arm cuff with a new one Refer to Chapter 5 Arm cuff deflates too soon Cannot measure or readings are too low or too high Nothing happens when you
10. iastolic pressure is outside the standard range the heartbeat symbol will blink when the measurement result is displayed m e If there are no measurements results stored in the memory the screen to the right is displayed 2 Press the START STOP button to turn the monitor off It will automatically turn off after 2 minutes To Delete the Values Stored in Memory Press and hold the START STOP button for more than 15 seconds 4 Troubleshooting and Maintenance 4 1 The Icons and Error Messages Error Display Irregular heartbeats are detected Movement during measurement Remove the arm cuff Wait 2 3 minutes and then take another measurement Repeat the steps in section 3 3 If this error continues to appear contact your doctor Carefully read and repeat the steps in section 3 3 The batteries are low You should replace them with new ones ahead of time Refer to section 2 1 The batteries are exhausted Air plug disconnected You should replace them with new ones at once Refer to section 2 1 Insert the plug securely Refer to section 3 1 Arm cuff not applied correctly Apply the arm cuff correctly Refer to section 3 1 cuff Air is leaking from the arm Replace the cuff with the new one Refer to Chapter 5 Movement during measurement and the arm cuff has not been inflated sufficiently Repeat measurement Remain still and do not talk durin
11. ir supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal Manufacturer OMRON HEALTHCARE Co Ltd 53 Kunotsubo Terado cho Muko Kyoto 617 0002 JAPAN OMRON HEALTHCARE EUROPE B V Scorpius 33 2132 LR Hoofddorp THE NETHERLANDS www omron healthcare com Asia Pacific HQ OMRON HEALTHCARE SINGAPORE PTE LTD 438A Alexandra Road 05 05 08 Alexandra Technopark Singapore 119967 www omron healthcare com sg Production facility OMRON HEALTHCARE MANUFACTURING VIETNAM CoO LTD Binh Duong Province VIETNAM Made in Vietnam
12. mH 2 Plug the AC adapter into an electrical outlet To disconnect the AC adapter unplug the AC adapter from the electrical outlet first and then remove the AC adapter plug from the main unit HEM 8712 IN_A_M03_130621 pdf 6 Technical Data Product Description Automatic Blood Pressure Monitor Model HEM 8712 Display LCD Digital Display Measurement Method Oscillometric method Measurement Range Pressure 0 to 299 mmHg Pulse 40 to 180 beats min Accuracy Pressure 3 mmHg Pulse 5 of display reading Inflation Fuzzy logic controlled by electric pump Deflation Automatic pressure release valve Memory Last Measurement Rating DC6V 4W Power Source 4 AA batteries 1 5V or AC adapter optional INPUT AC100 240V 50 60Hz 0 12A Battery Life Approx 1000 measurements using new alkaline batteries e Applied Part Type BF Protection Against Internally powered ME equipment When using only Electric Shock the batteries 0 Class I ME equipment Optional AC adapter Operating 10 to 40 C 30 to 85 RH temperature Humidity Storage temperature 20 to 60 C 10 to 95 RH 700 1060 hPa Humidity Air pressure Console Weight Approx 250g without batteries Cuff Weight Approx 130g Outer Dimensions Approx 103 w mm x 80 h mm x 129 1 mm Cuff Dimensions Approx 145 mm x 466 mm Cuff arm circumference 22 to 32 cm Nylon polyester polyvinyl chloride Main unit arm cuff instruction manual battery set
13. n after the batteries are replaced The supplied batteries may have a shorter life Disposal of used batteries should be carried out in accordance with the national regulations for the disposal of batteries 3 Using the Unit 3 1 Applying the Arm Cuff Remove tight fitting clothing or tight rolled up sleeve from your upper arm Do not place the arm cuff over thick clothes 1 Insert the air plug into the air jack securely 2 Put your arm through the cuff loop The bottom edge of the arm cuff should be 1 to 2 cm above the elbow Marker arrow under the air tube is centred on the middle of your inner arm 1 to 2 cm 3 Close the fabric fastener FIRMLY Notes e When you take a measurement on the right arm the air tube will be at the side of your elbow Be careful not to rest your arm on the air tube e The blood pressure can differ between the right arm and the left arm and therefore also the measured blood pressure values can be different OMRON recommends to always use the same arm for measurement If the values between both arms differ substantially please check with your doctor which arm to use for your measurement 3 2 How to Sit Correctly To take a measurement you need to be relaxed and comfortably seated under comfortable room temperature No bathing drinking alcohol or caffeine smoking exercising or eating 30 minutes before taking a measurement Sit on a chair with your
14. nufactured by OMRON HEALTHCARE conforms to this EN60601 1 2 2007 standard for both immunity and emissions Nevertheless special precautions need to be observed Do not use mobile cellular telephones and other devices which generate strong electrical or electromagnetic fields near the medical device This may result in incorrect operation of the unit and create a potentially unsafe situation Recommendation is to keep a minimum distance of 7 m Verify correct operation of the device in case the distance is shorter Further documentation in accordance with EN60601 1 2 2007 is available at OMRON HEALTHCARE EUROPE at the address mentioned in this instruction manual Documentation is also available at www omron healthcare com Correct Disposal of This Product Waste Electrical amp Electronic Equipment This marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this product from other types of wastes and recycle it responsibly to E promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can return this item for environmentally safe recycling Business users should contact the
15. rm cuff Battery Usage e Do not insert the batteries with their polarities incorrectly aligned e Use only four AA alkaline or manganese batteries with this unit Do not use other types of batteries Do not use new and used batteries together e Remove the batteries if the unit will not be used for 3 months or more AC Adapter optional Usage e Fully insert the power plug e When disconnecting the power plug do not pull the power cord Be sure to hold the power plug e When handling the power cord observe the following Do not damage Do not break it Do not tamper with it Do not forcibly bend or pull Do not twist Do not bundle during use Do not pinch Do not place under heavy objects e Wipe the dust of the power plug e Disconnect the power plug if the product will not be used for a long period of time e Disconnect the power plug before starting maintenance e Use only the original AC adapter designed for this unit Use of unsupported adapters may damage and or may be hazardous to the unit General Precautions e Do not forcibly bend the arm cuff or bend the air tube excessively e To unplug the air plug pull on the air plug at the connection with the main unit not the tube itself e Do not apply strong shocks and vibrations to or drop the unit and arm cuff e Do not inflate the arm cuff when it is not wrapped around your arm e Read and follow the Important information regarding Electro Magnetic Compatibility
Download Pdf Manuals
Related Search