Home

Nokia E75 User Guide

1. 2 Insert the memory card in the slot with the contact country enter the first letters of the country name area first Ensure the contact area is facing the Itis important to select the correct country because connectors on the device scheduled calendar entries may change if you change the country later and the new country is located in a different time zone The Phone setup application opens Select the appropriate option or select No to close the application To open the Phone setup application later select Menu gt Help gt Phone setup Oke To set up chat and internet calls use the wizard Important Do not remove the memory card available in the home screen during an operation when the card is being accessed Doing so may damage the memory card and the device TO configure the various settings in your device use and corrupt data stored on the card the wizards available in the home screen and the Settings wizard application When you switch the device on it may recognise the SIM card provider and 3 Push the card in until it locks into place 4 Close the cover of the memory card slot 4 Quick start guide Quick start guide 12 configure some settings automatically You can also contact your service provider for the correct settings You can switch the device on without inserting a SIM card The device starts up in the offline profile and you cannot use the network dependent phone functions To
2. Before you can use Instant messaging you must save the settings to access the service that you want to use The settings may be preconfigured in your device or you may receive the settings as a configuration message from the service provider that offers the IM service You can also enter the settings manually IM views In the application main view select e UserID to view your own IM status and identity e Conversations to view alist of IM conversations chat groups and received invitations and to open a chat group conversation or invitation To view your contacts select a contact list name The following options are available New conversation Start or continue a conversation with an IM user Messaging 55 Messaging 56 New IM contact Create edit or view the online Status of your IM contacts Saved conversations View a previous instant messaging session that you saved When you open a conversation the conversation view shows the messages that have been sent and received To send a new message type the message in the editing box at the bottom of the screen Connect to an IM server 1 To connect to the instant messaging IM server in use open IM and select Options gt Login 2 Enter your user ID and password and press the scroll key to log in You obtain the user ID and password for the IM server from your service provider 3 To log out select Options gt Log out S
3. Edit SIP profiles Select Menu gt Control panel gt Settings and Connection gt SIP settings Select Options gt Edit and from the following e Profile name Enter a name for the SIP profile e Service profile Select IETF or Nokia 3GPP e Default destination Select the destination to use for the internet connection e Default access point Select the access point to use for the internet connection e Public user name Enter your user name provided by your service provider e Use compression Select if compression is used e Registration Select the registration mode e Use security Select if security negotiation is used e Proxy server Enter the proxy server settings for this SIP profile e Registrar server Enter the registration server settings for this SIP profile Edit SIP proxy servers Select Options gt New SIP profile or Edit gt Proxy server Proxy servers are intermediate servers between a browsing service and its users used by some service providers These servers may provide additional security and speed up access to the service Select from the following e Proxy server address Enter the host name or IP address of the proxy server in use e Realm Enter the proxy server realm e User name and Password Enter your user name and password for the proxy server Allow loose routing Select if loose routing is allowed e Transport type Select
4. To search for new podcast episodes to subscribe to select Directories To search for podcasts using keywords and podcast show titles select Search To display the available episodes from the selected podcast open the Podcasts folder and select Open To download the selected episode select Download To play the downloaded episode select Play To update the selected podcast or marked podcasts for a new episode select Options gt Update To open the web site of the podcast network service select Options gt Open web page Some podcasts provide the opportunity to interact with the creators by commenting and voting To connect to the internet to do this select Options gt View comments Directories Select Directories Directories help you find new podcast episodes to which to subscribe Contents of the directories change Select the desired directory folder to update it network service The colour of the folder changes when the update is complete To subscribe to a podcast scroll to the podcast title and select Update After you have subscribed to episodes of a podcast you can download manage and play them in the podcasts menu To add a new directory or folder select Options gt New gt Web directory or Folder Select a title URL of the opml outline processor markup language file and Done To import an opml file stored on your device select Options gt Import OPML file To save a r
5. 112 Manual synchronisation With manual synchronisation you can select the songs and playlists that you want to move copy or remove 1 After your device is connected with Windows Media Player select your device in the navigation pane on the right if more than one device is connected 2 In the left navigation pane browse the music files on your PC which you want to synchronise 3 Drag and drop songs to the Sync List on the right You can see the amount of available memory in your device above the Sync List 4 Toremove songs or albums select an item in the Sync List right click and select Remove from list 5 To start the synchronisation click Start Sync Automatic synchronisation 1 To activate the automatic synchronisation function in Windows Media Player click the Sync tab select Nokia Handset gt Set Up Sync and check the Sync this device automatically check box 2 Select the playlists you want to synchronise automatically in the Available playlists pane and click Add The selected items are transferred to the Playlists to sync pane 3 Tofinalise the setup for automatic synchronisation click Finish When the Sync this device automatically check box is checked and you connect your device to the PC the music library in your device is automatically updated based on the playlists you select for synchronisation in Windows Media Player If no playlists have been selected the whole PC music li
6. Use the SIM access profile 1 Select Menu gt Control panel gt Connectivity gt Bluetooth and Remote SIM mode gt On 2 Activate Bluetooth connectivity in the car kit 3 Use your car kit to start a search for compatible devices For instructions see the user guide of your car kit 4 Select your device from the list of compatible devices 5 To pair the devices enter the Bluetooth passcode shown on the display of the car kit to your device Tip If you have already accessed the SIM card from the car kit with the active user profile the car kit searches automatically for a device with the SIM card If it finds your device and automatic authorisation is activated the car kit automatically connects to the GSM network when you switch on the car ignition When you activate the remote SIM access profile you can use applications on your device that do not need network or SIM services To make connections between your device and the car kit without separate acceptance or authorisation select Menu gt Control panel gt Connectivity gt Bluetooth and open the paired devices tab Select the car kit and Set as authorised and answer Yes to the confirmation query If the car kit is set as unauthorised connection requests from it must be accepted separately every time To end the remote SIM access connection from your device select Menu gt Control panel gt Connectivity gt Bluetooth and Remote SIM mode gt Of
7. N A aN fr WT a JOW Oat Du p W W by a a o_o Select Menu gt Download With Download network service you can browse download and install items such as latest applications and related documents to your device from the web The items are categorised under catalogues and folders provided by Nokia or independent service providers Some items may be chargeable but you can usually preview them free of charge Download uses available network connections to access the most up to date content For information on additional items available through Download contact your service provider or the supplier or manufacturer of the item Internet T1 Internet 18 Manage items Select Menu gt Download To open an item or view the content of a folder or catalogue select the item folder or catalogue To buy the selected item select Options gt Buy To download an item that is free of charge select Options gt Get To search for an item select Options gt Search To adjust the settings select Options gt Applications gt Settings To view a list of downloaded items select Options gt My items Subscriptions Select Menu gt Download and Options gt My items gt My subscriptions To view file details of the selected item select Options gt Open To renew or cancel a subscription select Options and the corresponding option Download search Select Menu gt Download a
8. Phone 64 To make or receive internet calls contact your service provider to receive the internet call connection settings To connect to an internet call service your device must be in a network service area To activate your internet call service select Options gt Activate service To search for available wireless LAN WLAN connections select Options gt Search for WLAN Make internet calls When you have activated the internet call feature you can make an internet call from all applications where you can make a regular voice call such as the contacts list or log For example in the contacts list scroll to the desired contact and select Options gt Call gt Internet call To make an internet call in the home screen enter the phone number or internet address and select Net call 1 To make an internet call to an internet address that does not start with a digit press any number key in the home screen then press for a few seconds to clear the display and to switch from number mode to letter mode 2 Enter the internet address and press the call key Internet call settings Select Menu gt Contacts Scroll left and select the internet calls service from the list To view or edit internet call settings select Options gt Settings and from the following e Service connectivity Select the destination settings for internet call connectivity and edit destination details To change a destin
9. The exposure guidelines for mobile devices employ a unit of measurement Known as the Specific Absorption Rate or SAR The SAR limit stated in the ICNIRP guidelines is 2 0 watts kilogram W kg averaged over 10 grams of tissue Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands The actual SAR level of an Operating device can be below the maximum value because the device is designed to use only the power required to reach the network That amount changes depending on a number of factors such as how close you are to a network base station The highest SAR value under the ICNIRP guidelines for use of the device at the ear is 1 20 W kg Use of device accessories may result in different SAR values SAR values may vary depending on national reporting and testing requirements and the network band Additional SAR information may be provided under product information at www nokia com Additional safety information 173 Index 174 3 Dringing tones 32 802 1x security settings 150 access points 146 groups 14 7 VPN 138 accessories settings 142 activation keys 136 active notes 91 Settings 91 alarm clock 96 alerttones 141 antennas 18 application manager 134 application settings 153 applications 134 common actions 28 updating 136 assisted GPS A GPS 80 attachments multimedia messages 51 audio files details 113
10. Menu Select Menu The menu is a starting point from which you can open all applications in the device or ona memory card The menu contains applications and folders which are groups of similar applications All applications you install in the device yourself are by default saved in the Applications folder To open an application select the application that is scroll to it and press the scroll key To switch between the open applications press and hold the home key and select an application Leaving applications running in the background increases the demand on battery power and reduces the battery life Select Options and from the following Change Menu view View applications in a list or a grid Memory details View the memory consumption of different applications and data stored on the device or memory card and to check the amount of free memory New folder Create a new folder Rename Rename a new folder Move Rearrange the folder Scroll to the application you want to move and select Move A check mark is placed beside the application Scroll to a new location and select OK Move to folder Move an application to a different folder Scroll to the application you want to move and select Move to folder the new folder and OK Download applications Download applications from the web 3G The device is being used in a UMTS network network service The battery charge
11. Not following them may be dangerous or illegal Read the complete user guide for further information Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger Obey all local laws Always keep your hands free to operate the vehicle while driving Your first consideration while driving should be road safety All wireless devices may be susceptible to interference which could affect performance Follow any restrictions Switch the device off in aircraft near medical equipment fuel chemicals or blasting areas Only qualified personnel may install or repair this product Use only approved accessories and batteries Do not connect incompatible products Your device is not water resistant Keep it dry The wireless device described in this guide is approved for use on the E GSM 850 900 1800 and 1900 networks and UMTS 900 1900 2100 HSDPA networks Contact your service provider for more information about networks Your device supports several connectivity methods and like computers may be exposed to viruses and other harmful content Exercise caution with messages connectivity requests browsing and downloads Only install and use services and software from trustworthy sources that offer adequate security and protection such as applications that are Symbian Signed or have passed the Java Verified testing Consider installing antivirus and other
12. View a list of all defined IM servers e Default server Change the IM server to which you want to connect IM login type To log in automatically when you start IM select On app start up To add a new server to your list of IM servers select Servers gt Options gt New server Enter the following server settings e Server name The name of the chat server e Access point in use The access point you want to use for the server Web address The URL address of the IM server User ID Your user ID e Password Your login password To make and receive calls the device must be switched on it must have a valid SIM card installed and you must be located in the service area of a cellular network To make or receive a net call your device must be connected to a net call service To connect to a net call service your device must be in the coverage of a connection network such as a wireless LAN WLAN access point Barrie The actual invoice for calls and services from your service provider may vary depending on network features rounding off for billing taxes and so forth To answer a Call press the call key To reject a call press the end key To mute the ringing tone instead of answering a call select Silence When you have an active call and the call waiting function network service is activated press the call key to answer a new incoming call The first call is put on hold To end
13. and define how often the device searches for networks e Video sharing Enable video sharing select the SIP profile for video sharing and define the video saving settings e SIP settings View or create session initiation protocol SIP profiles e XDM profile Create an XDM profile The XDM profile is required for many communications applications for example presence e Presence Edit the settings for presence network service To register for the service contact your service provider e Remote drives Connect the device to a remote drive e Configurations View and delete trusted servers from which your device may receive configuration settings e APN control Restrict packet data connections f Aaa E a sas WT af F o al a Py re o il l edale d ic is ea DIN Select Menu gt Control panel gt Settings and Connection gt Destinations You may receive access point settings in a message from a service provider Some or all access points may be preset for your device by your service provider and you may not be able to change create edit or remove them When you select one of the access point groups you can see the access point types indicates a protected access point lt indicates a packet data access point indicates a wireless LAN WLAN access point Tip You can create internet access points ina WLAN with the WLAN wizard To create a new access point se
14. change the font colour press and hold the Shift key and scroll to select the text Then select Options gt Text Select Options and from the following e Insertobject Insertimages sound or video clips business cards web bookmarks and files e Send Send the note Link note to call Select Add contacts to link a note to a contact The note is displayed when making a call to or receiving a call from the contact Settings for Active notes Select Menu gt Office gt Active notes and Options gt Settings To select where to save notes select Memory in use and the desired memory To change the layout of active notes or to view the notes as a list select Change view gt Grid or List To see a note in the background when making or receiving phone calls select Show note during call gt Yes Tip If you temporarily do not want to see notes during phone calls select Show note during call gt No This way you do not have to remove the links between notes and contact cards Calculator Select Menu gt Office gt Calculator This calculator has limited accuracy and is designed for simple calculations To make a calculation enter the first number of the calculation Select a function such as add or subtract Nokia Office Tools 91 Nokia Office Tools 92 from the function map Enter the second number of the calculation and select The calculator performs operations in the order they are ent
15. enter p To set the device to send the DTMF tones only after you select Send DTMF during a call enter w To enter p and w with the keypad press repeatedly 3 Select Done Talking theme Select Menu gt Control panel gt Themes and Home screen gt Talking theme When the talking theme is activated a list of functions supported by the talking theme is displayed in the home screen As you scroll through the functions the device reads the displayed functions aloud Select the desired function To listen to the entries in your contacts list select Call features gt Contacts To listen to information on your missed and received calls and dialled numbers select Call features gt Recent calls To make a call by entering the phone number select Call features gt Dialler and the desired numbers To enter a phone number scroll to the digits and select them one by one To call your voice mailbox select Call features gt Voice mailbox To use voice commands to make a call select Voice commands To have your received messages read aloud select Message reader To listen to the current time select Clock To listen to the current date scroll down If the calendar alarm expires when you are using voice aid the application reads the calendar alarm content aloud To listen to the available options select Options Fir Select Menu gt Control panel gt Phone gt Voice comm Use voice commands to m
16. for example when your device is outside network coverage On The message sent icon or text on your device screen does not indicate that the message is received at the intended destination To request the network to send you a delivery report of the text messages and multimedia messages you have sent network service select Options gt Settings gt Text message gt Receive report or Multimedia message gt Receive reports The reports are saved in the Reports folder 41 Messaging 42 Organise messages Select Menu gt Messaging and My folders To create a new folder to organise your messages select Options gt New folder To rename a folder select Options gt Rename folder You can only rename folders that you have created To move a message to another folder select the message Options gt Move to folder the folder and OK To sort messages in a specific order select Options gt Sort by To view the properties of a message select the message and Options gt Message details E mail You can access your e mail accounts in Menu gt E mail and Menu gt Messaging Set up your e mail With the E mail wizard you can set up your corporate e mail account such as Mail for Exchange and your internet e mail account When setting up your corporate e mail you may be prompted for the name of the server associated with your e mail address Contact your company IT department for details before you
17. gt Applications gt Media gt Radio gt FM radio To open the list of your saved stations select Options gt Stations To listen to a saved station select Options gt Station gt Listen To change station details select Options gt Station gt Edit FM radio settings Select Menu gt Applications gt Media gt Radio gt FM radio To automatically search for alternative frequencies if the reception is weak select Options gt Settings gt Alternative frequencies gt Auto scan on To set the default access point for the radio select Options gt Settings gt Access point To select the region where you currently are select Options gt Settings gt Current region This setting is displayed only if there is no network coverage when you Start the application Media Nokia Internet Radio Fed Select Menu gt Applications gt Media gt Radio gt Internet radio With the Nokia Internet Radio application network service you can listen to available radio stations on the internet To listen to radio stations you must have a wireless LAN WLAN or packet data access point defined in your device Listening to the stations may involve the transmission of large amounts of data through your service provider s network The recommended connection method is WLAN Check with your service provider for terms and data service fees before using other connections For example a flat rate data plan can allow larg
18. indicators 25 inserting battery 9 memory card 10 SIMcard 9 installing applications 134 instant messaging 55 changing your own status 56 connecting to anIM server 56 modifying your personal preferences 56 recording chats 57 retrieving IM contact lists 57 searching for groups and users 5 7 server settings 58 Starting a new conversation 56 using IM groups 58 viewing and starting conversations 56 views 55 internet calls 63 144 activating 63 making 64 settings 64 internet connection 73 See also browser internet radio favourites 116 listening 115 searching for stations 116 settings 117 Station directory 117 intranet browsing 77 Java applications 134 JME Java application support 134 key store 133 keyboard 26 keyguard 14 keypad lock settings 143 locking 14 tones 141 keys 12 13 WEP keys 150 landmarks 82 language settings 141 licenses 136 location information 80 lock code 130 143 locking device 130 device autolock 143 keypad 14 143 log 72 adding numbers to Contacts 72 deleting 72 making acall 72 sending messages 72 settings 72 logos welcome logo 140 memory Clearing 22 web cache 75 memory card N Gage 117 availability 119 Mail for Exchange 46 making acall 59 Index Maps 83 ie deleting games 120 driving 87 Eeng i downloading games 117 F it 86 inserting 10 friends 118 ndd a l ai locking 130 on i ans finding ocations passwords 130 ome ta indicators 84 menu 24 messaging 119 intern
19. select a location press the scroll key and select Add gt Add to collection To view the selected location on the map press the scroll key and select Show on map Routes To view the routes you have saved select Routes To open the selected route select Options gt Open mn j E A N 1 rms nNeaATrnNr FA FRA A PR gm i a e ES em Le Y a A D E ii a AE j l i A S al a i Lm N _ Y we L a i gt 7 al Select Menu gt Applications gt GPS gt Maps To navigate to your destination you must purchase a licence for the navigation service To purchase a licence for pedestrian and car navigation with voice guidance select Options gt Extras gt Drive amp Walk To purchase a licence for pedestrian navigation only select Walk The licence is region specific and can be used only in the selected area You can pay for the licence through a credit card or in your phone bill if supported by your service provider You can transfer the licence from your device to another compatible device but the licence can only be used in one device at a time When you use navigation for the first time you are asked to select the language of the voice guidance and download the related voice guidance files To change the language later in the main view select Options gt Tools gt Settings gt Navigation gt Voice guidance Voice guidance is not available for pedestrian navigation To start n
20. 3 o u sep W b E ma S TaifTet ae To purchase a licence for pedestrian and car navigation with voice guidance select Options gt Extras gt Drive amp Walk The licence is region specific and can be used only in the selected area Travelling 87 Travelling 88 To start navigating by car scroll to a location press the scroll key and select Drive to When you use car navigation for the first time you are asked to select the language of the voice guidance and download the related voice guidance files To switch between different views during the navigation press the scroll key and select Manoeuvre view Bird s eye view or Arrow view To find an alternative route select Options gt Diff route To repeat the voice guidance select Options gt Repeat To adjust the volume of the voice guidance select Options gt Volume To view information about traffic events that may affect your travel extra service select Options gt Traffic info To stop navigating select Stop navigation Traffic information Select Menu gt Applications gt GPS gt Maps The real time traffic information service provides information about traffic events that may affect your travel The traffic information service is an extra service that you can purchase and download into your device if available in your country or region To purchase a licence for the traffic information service select Options gt Extras gt Traff
21. DFOAGCAST onnan a Gesiavsieenpervedianasone 52 Messaging settini Saarai Ei 52 Instant messaging eesseeeseeeesssssseosecssssssessessssssssse 55 PHONG naaa T 59 VOICE COU S aean aa e EOE 59 VOICE MA siana a 60 VAE OCA S arsaa a EA 60 Vdeo SAN eriet N aa 61 Internet calls nera o ia 63 Speed CANO vissccpcesicetisrdeddsncevuciviosectsmnseticetiecdatioeics 64 Cal CW Cli ann a a ai 65 Cal bari Nasse ae A EEE 65 B r Met Call ii i 66 send DIMF TON Sen a a E 66 Talking themMe eoeeeeeneeeeesseeseesseesssssesessssseessssessssseeee 66 Voice command S sssrcisienisreseririesisaoseedonin ss isnir re ksa is 67 PUSH CO Gall ia T E A 68 oN AET EE A E E EE E E EE 71 I AE A RITER E E ESN 13 BROWS C0 E E E A N E E 13 Browse the intranet cc cesceccccssscsccsstecesssessessees T1 Download onnie aat i T1 Connect your computer tO Web ssseessssseesssseseess0 19 Positioning GPS ini 80 MaD S A e ea E a a e anet 83 Nokia Office TOOIS cccccccccscccccsccsccscees 91 ACTIVE NOTES n EEE A E 91 EETA Ea EE EA E A E EE 91 File MANAGEL ccccccssscccccssecscssssccscsssssscsstecssssesessssees 92 QUICK ORE CO assine a o A ERA 93 ENLA E S PEE E EE E EE E 93 Ap Minde oani 94 PDF read anaa a 94 PrN NO aa aa a E 94 COCO nen E AT 96 Barcode reddet vroeere aa 96 DICE ORI aeaii n a a N 97 NKO K eKA E EAA EE 97 Medida ose ceseeee 99 AIM Cs E EEE TE E T A E E 99 Gall OTN ana a A A EAA 102 SI aC OMG o a E TT a 103 N
22. E mail wizard 2 Enter your e mail address and password If the wizard is not able to configure your e mail settings automatically select your e mail account type and enter the related settings Tip If you have not configured your mailbox press the e mail key to start the E mail wizard If your device contains additional e mail clients those are offered to you when you start the E mail wizard Your device may have internal and external antennas Avoid touching the antenna area unnecessarily while the antenna is transmitting or receiving Contact with antennas affects the communication quality and may cause a higher power level during operation and may reduce the battery life Nokia PC Suite is a set of applications that you can install to a compatible PC Nokia PC Suite groups all available applications in a launcher window from which you can run the applications You can install Nokia PC Suite from the memory card in your device You can use Nokia PC Suite to synchronise contacts calendar and to do and other notes between your device and a compatible PC application such as Microsoft Outlook or Lotus Notes You can also use Nokia PC Suite to bookmark between your device and compatible browsers and transfer images and video clips between your device and compatible PCs O Pay attention to synchronisation settings Data deletion as part of normal synchronisation process is determined by the settings selected To use No
23. IP addresses Dual tone multifrequency tones The DTMF system is used by touch tone EGPRS telephones DTMF assigns a specific frequency or tone to each Key so that it can easily be identified by a microprocessor DTMF tones allow you to communicate with voice mailboxes computerised telephony systems and SO On Extensible authentication protocol EAP plug ins are used in wireless networks to authenticate wireless devices and authentication servers Enhanced GPRS EGPRS is similar to GPRS but it enables faster connection For availability and data transfer speed contact your service provider Glossary 157 Glossary 158 General packet radio service GPRS enables wireless access for mobile phones to data networks network service GPRS uses packet data technology where information is sent in short bursts of data over the mobile network The benefit of sending data in packets is that the network is occupied only when sending or receiving data As GPRS uses the network efficiently it allows for quick data connection setup and fast data transmission speeds You must subscribe to the GPRS service For availability and subscription to GPRS contact your service provider During a voice call you cannot establish a GPRS connection and any existing GPRS connection is put on hold unless the network supports dual transfer mode Global positioning system GPS is a worldwide radio navigation system H
24. Insert text from a template Add recipient Add recipients to the message from Contacts e Editing options Cut copy or paste the selected text e Input options Activate or deactivate predictive text input or select the writing language 6 Select Options gt Send Add attachments Select Menu gt Messaging To write an e mail message select your mailbox and Options gt Create email To add an attachment to the e mail message select Options gt Add attachment To remove the selected attachment select Options gt Remove attachment Read e mail Select Menu gt Messaging CP important Exercise caution when opening messages Messages may contain malicious software or otherwise be harmful to your device or PC To read a received e mail message select the mailbox and select the message from the list To reply to the message sender select Options gt Reply To reply to the sender and all other recipients select Options gt Reply to all To forward the message select Options gt Forward Download attachments Select Menu gt Messaging and a mailbox To view the attachments in a received e mail message scroll to the attachment field and select Options gt Actions If there is one attachment in the message select Open to open the attachment If there are several attachments select View list to see a list showing which attachments have been downloaded or not To download the select
25. Menu gt Applications gt GPS gt Maps and Options gt Tools gt Settings gt Internet To select whether to allow Maps to open an internet connection when you start the application select Go online at start up To select the access point to be used when connecting to the internet select Default access point To select whether to be notified when your device registers to a network other than your home network select Roaming warning Navigation settings Select Menu gt Applications gt GPS gt Maps and Options gt Tools gt Settings gt Navigation To select the language of the voice guidance select Voice guidance You may need to download the voice files before you can select the language To define the backlight setting select Backlight To select how often the information about traffic events is updated select Traffic info update To set the device to plan a new route to avoid traffic events select Reroute due to traffic Route settings Select Menu gt Applications gt GPS gt Maps and Options gt Tools gt Settings gt Route To select the mode of transportation select Transport mode gt Walk or Drive If you select Walk one way Streets are regarded as normal streets and walkways can be used To calculate the fastest route select Route selection gt Faster route This option is available only if you have selected Drive as the mode of transportation To calculate the shortest route
26. Switch application 16 switching device on off 11 Symbian applications 134 synchronisation of data 137 Index tabs 28 talking theme 66 text changing size 140 predictive input 27 textinput 26 text messages messages on SIM card 49 179 Index 180 sending 48 settings 52 themes 31 downloading 31 time settings 142 time and date 96 time zone settings 96 tones 141 personalising 31 settings 141 toolbar camera 99 troubleshooting 161 updates device software 21 UPIN code changing 143 uploading media files 103 USB datacable 122 vibrating alert 141 video playing 100 video calls making acall 60 switching to voice call 60 Video Centre 106 video centre downloading 106 my videos 107 transferring videos 108 video feeds 107 viewing 106 video clips details 113 playing 113 Shared 61 video sharing accepting invitation 63 Sharing live video 62 Sharing video clips 62 virtual private network use in applications 138 voice aid See talking theme voice commands changing profiles 67 launching an application settings 68 voice mail calling 60 changing number 60 volume 28 VPN access points 138 use in applications 138 wallpaper 102 warning tones 141 web connection 73 weblogs 74 welcome note 140 WEP keys 150 67 security settings 150 widgets 74 WLAN 802 1x security settings 150 access points 127 advanced settings 149 availability 127 MAC address 127 149 searching for networks 129 security sett
27. This feature may not be available in all languages To call the contact press the call key To disable the contact search select Options gt Contact search off To check your received messages select the message box in the notification area To read a message select the message To access other tasks scroll right To view your missed Calls select the calls box in the notification area To return a call select a call and press the call key To send a text message to a caller select a call scroll right and select Send text msg from the list of available actions To listen to your voice mail select the voice mail box in the notification area Select the desired voice mailbox and press the call key One touch keys With the One touch keys you can access applications and tasks quickly Each key has been assigned an application or a task To change these select Menu gt Control panel gt Settings and General gt Personalisation gt One touch keys Your service provider may have assigned applications to the keys in which case you cannot change them gt o W ao 2 3 1 Home key 2 Calendar key 3 E mail key To access the home screen press the home key briefly Press the home key briefly again to access the menu To view the list of active applications press the home key for a few seconds When the list is open press the home key briefly to scroll the list To open the selected app
28. To play a video clip select Video clips and a clip To list recently played files in the application main view select Recently played To stream content over the air network service select Streaming links and a link RealPlayer recognises two kinds of links an rtsp URL and an http URL that points to a RAM file Before the content begins streaming your device must connect to a website and buffer the content If a network connection problem causes a playback error RealPlayer attempts automatically to reconnect to the internet access point To download video clips from the web select Download videos To adjust the volume during playback use the volume keys To fast forward during playback scroll right and hold A To rewind during play scroll left and hold To stop the playback or streaming select Stop lt Buffering or the connection to the streaming site stops the playback of the clip stops and the clip rewinds to the beginning To view the video clip in normal screen mode select Options gt Continue in normal scr View information about a media clip To view the properties of a video or sound clip or web link select Options gt Clip details Information may include for example the bit rate or the internet link of a streaming file RealPlayer settings Select Menu gt Applications gt Media gt RealPlayer You may receive RealPlayer settings in a message from your service provider To
29. UB The battery can be charged and discharged hundreds of times but it will eventually wear out When the talk and standby times are noticeably shorter than normal replace the battery Use only Nokia approved batteries and recharge your battery only with Nokia approved chargers designated for this device If a battery is being used for the first time or if the battery has not been used for a prolonged period it may be necessary to connect the charger then disconnect and reconnect it to begin charging the battery If the battery is completely discharged it may take several minutes before the charging indicator appears on the display or before any calls can be made Safe removal Always switch the device off and 166 disconnect the charger before removing the battery Proper charging Unplug the charger from the electrical plug and the device when not in use Do not leave a fully charged battery connected to a charger since overcharging may shorten its lifetime If left unused a fully charged battery will lose its charge over time Avoid extreme temperatures Always try to keep the battery between 15 C and 25 C 59 F and 77 F Extreme temperatures reduce the capacity and lifetime of the battery A device with a hot or cold battery may not work temporarily Battery performance is particularly limited in temperatures well below freezing Do not short circuit Accidental short circuiting can occur when a metallic object such
30. UDP Automatic or TCP e Port Enter the port number of the proxy server Edit registration servers Select Options gt NewSIP profile or Edit gt Registrar server Select from the following e Registrar server address Enter the host name or IP address of the registrar server in use e Realm Enter the registrar server realm e User name and Password Enter your user name and password for the registrar server e Transport type Select UDP Automatic or TCP e Port Enter the port number of the registrar server Configuration settings Select Menu gt Control panel gt Settings and Connection gt Configurations You can receive messages from your service provider or company information management containing configuration settings for trusted servers These settings are automatically saved in Configurations You may receive configuration settings for access points multimedia or e mail services and instant messaging IM or synchronisation settings from trusted servers To delete configurations for a trusted server select Options gt Delete The configuration settings for other applications provided by this server are also deleted Restrict packet data Select Menu gt Control panel gt Settings and Connection gt APN control With the access point control service you can restrict packet data connections from your device to certain access points only Your SIM card may not support the
31. access point control service For more information contact your service provider To restrict packet data connections from your device select Options gt Activate restrictions You need your PIN2 code to activate and deactivate access point control or to edit the packet data access points on the control list To add access points that can be used for packet data connections to the control list select Options gt Add name manually To enable connections to an operator provided access point create an empty access point To remove access points from the list select Options gt Remove Application settings Select Menu gt Control panel gt Settings and Applications Select an application from the list to adjust its settings Settings 153 Shortcuts 154 Here are some of the available keyboard shortcuts in your device Shortcuts can make the use of the applications more efficient Power key Press and hold to switch your device on and off Press once to switch between profiles Press and hold to activate or deactivate Bluetooth connectivity Home screen Press and hold to activate or deactivate the Silent profile Ctrl C Ctrl V Left selection Lock and unlock the keypad and key keyboard Call key Open the call log Press and hold to open your homepage in the Web browser 1 Press and hold to call your voice mailbox Number key 2 Call a phone number using speed dialling
32. activities When you start the push to talk PTT service you are automatically logged in and connected to the channels that were active the last time you closed the application If the connection fails to attempt to log in again select Options gt Login to PTT To exit PTT select Options gt Exit To switch to another open application press and hold the menu key Make and receive a PTT call To make a PTT call press and hold the call key as long as you talk To listen to the response release the call key To check the login status of your contacts in PTT select Options gt PTT contacts gt Contacts and from the following e 4 person available 2 person unknown person does not want to be disturbed but can receive callback request e 4 person has PTT switched off This service depends on your network operator and is only available for subscribed contacts To subscribe a contact select Options gt Show login status Make a one to one Call Select Options gt PTT contacts gt Contacts Select the contact you want to talk to and Options gt Talk 1 to 1 Press and hold the PTT Key the entire time you are talking When you have finished release the Key To talk to a contact press and hold the PTT Key also in other views in the PTT application for example the Contacts view To make a new phone call first end the one to one call Select Disconnect Tip Hold the device in f
33. alarm clock e Alarm snooze time Define the snooze time for the alarm clock e Workdays Define the days of the week that are work days for you e Automatic time update Update the time date and time zone information automatically network service Common accessory settings Select Menu gt Control panel gt Settings and General gt Enhancement With most accessories you can do the following To define which profile is activated when you attach an accessory to your device select the accessory and Default profile To set the device to answer phone calls automatically after 5 seconds when an accessory is attached select Automatic answer gt On If the ringing type is set to Beep once or Silent in the selected profile automatic answering is disabled To illuminate the device while it is attached to an accessory select Lights gt On Sensor settings Select Menu gt Control panel gt Settings and General gt Sensors To set the display to rotate automatically according to the device s orientation select Display rotation Security settings About security settings Select Menu gt Control panel gt Settings and General gt Security Define the following security settings e Phone and SIM card Adjust the security settings for your device and SIM card e Certificate management Manage your security certificates e Protected content Adjust your settings for DRM protected con
34. and press the scroll key to select Yes or No You cannot change the trust settings of a personal certificate Depending on the certificate a list of applications that can use the certificate is displayed e Symbian installation New Symbian operating system application e Internet E mail and graphics e App installation New Java application e Online certif check Online certificate status protocol View and edit security modules Select Menu gt Control panel gt Settings and General gt Security gt Security module To view or edit a security module select the module from the list To view detailed information about a security module select Options gt Security details To edit the PIN codes for the security module open the module and select Module PIN to edit the PIN code for the security module or Signing PIN to edit the PIN code for digital signatures You may not be able to change these codes for all security modules The key store contains the contents of the security module To delete the key store select Options gt Delete You may not be able to delete the key store of all security modules Security and data management 133 Security and data management 134 ia With Application manager you can see the software packages installed in your device You can view details of installed applications remove applications and define installation settings You can install two types
35. another device Not allowed means that you cannot send the file to another device e Contentin phone Yes means that the file is in the device and the path of the file is displayed No means that the related file is not currently in the device To activate a key in the licenses main view select Invalid licences gt Options gt Get licence Establish a network connection at the prompt and you are directed to a website where you can purchase rights to the media To remove file rights open the valid keys tab or the keys not in use tab scroll to the desired file and select Options gt Delete If there are several rights related to the same media file all the rights are deleted The group key view displays all of the files related to a group right If you have downloaded multiple media files with the same rights they are all displayed in this view You can open the group view from either the valid keys or invalid keys tabs To access these files open the group rights folder Select Menu gt Control panel gt Sync Sync enables you to synchronise your notes calendar entries text and multimedia messages browser bookmarks or contacts with various compatible applications on a compatible computer or on the internet You may receive synchronisation settings in a special message from your service provider A synchronisation profile contains the necessary settings for synchronisation When you open the Sync applicatio
36. are prompted to create a player name A player name enables you to participate in the N Gage community connect with other players and share your gaming achievements recommendations and reviews To create a new player name do the following 1 Select Register New Account 2 Enter your date of birth and make up a player name and a password If the player name is already reserved N Gage suggests available similar names 3 Enter your details read and accept the terms and conditions and select Register You can also create a player name at www n gage com Without a player name you can still download purchase and play games rm w a i EF E TaY ann gt AA eA Au ww gea gm 8 eF Te ree BE a CE E Ld M LS Select Menu gt Applications gt Media gt N Gage To invite N Gage players to your friends list open the friends tab and enter the player names to the Add a Friend field Enter a message and select Send If the recipients accept the invitation their player names are added to your friends list To meet other players visit the chat rooms and forums at Www n gage com To view a friend s profile go to the friend in your friends list To see the online status of your friends you must be connected to the N Gage service To remove a friend from your friends list select Options gt Remove from Friends List To sort your friends by availability player name or total points select Options gt Sort
37. at the time you define To cancel scheduled downloads select Manual download as the download method Media za i x Ji om r a A _ 4 4 7a ay yates E Lo a a ye SS Ws iL TA aP Select Menu gt Applications gt Media gt Video centre The content of the installed video services is distributed using RSS feeds To view and manage your feeds select Video feeds Select Options and from the following e Feed subscriptions Check your current feed subscriptions e Feed details View information about a video e Add feed Subscribe to new feeds Select Via Video directory to select a feed from the services in the video directory e Refresh feeds Refresh the content of all feeds e Manage account Manage your account options for a particular feed if available e Move Move video clips to a desired location To view the videos available in a feed select a feed from the list 7 MU WIinanc Yow Waue E E W EAAS d My videos is a storage place for all video clips in the Video centre application You can list downloaded video clips and video clips recorded with the device camera in separate views 107 amp 1 To open a folder and view video clips use the scroll 3 Select the video clips you want to copy from your 5 key To control the video player when the video clip PC lt is playing use the scroll key and the selection keys 4 Transfer the video clips t
38. audio messages 48 audiothemes 31 auto update for time date 96 autolock period 143 background image 31 backing up device memory 92 barcodes 96 battery charge level 25 charging 10 inserting 9 blogs 74 Bluetooth authorising devices 124 pairing 124 passcode 124 receiving data 123 security 126 sending data 123 Bluetooth connectivity blocking devices 125 bookmarks 75 browser 73 bookmarks 75 browsing pages 73 74 cache memory 75 searching content 75 security 76 settings 76 toolbar 73 widgets 74 browsing intranet 77 cable 122 cache memory 75 calculator 91 calendar 35 creating entries 36 meeting requests 36 views 36 calendar key 35 call barring 65 net calls 66 call divert 65 caller ID 144 Calls answering 59 barring net calls 66 conference call 59 internet calls 64 making 59 making a call from log 72 muting the ringing tone 59 rejecting 59 restricting See fixed dialling settings 144 voice commands 67 voice dialling 67 voice mail 60 camera capturing images 99 image settings 101 playing videos 100 scenes 99 sequence mode 100 toolbar 99 video clips 100 video settings 101 viewing images 100 car kit remote SIM access 126 cellbroadcast 52 settings 55 certificates details 132 settings 133 chat 55 Clock settings 96 conference calls 59 configuration messages 153 connection methods Bluetooth 123 data cable 122 connections ending 128 PC connection 79 connectors 12 contact
39. can quickly access your most frequently used applications and view at a glance if you have missed calls or new messages Whenever you see the icon scroll right to access a list of available actions To close the list scroll left 15 Quick start guide 16 The home screen consists of the following 1 Application shortcuts To access an application select the shortcut of the application 2 Information area To check an item displayed in the information area select the item 3 Notification area To view the notifications scroll to a box A box is only visible if there are items in it You can define two separate home screens for different purposes for example one screen to show your business e mail and notifications and another to show your personal e mail This way you do not have to see business related messages outside office hours To switch between the home screens select A To define which items and shortcuts you want in the home screen and to set the appearance of the home screen select Menu gt Control panel and Modes Nokia Switch amp Transfer content You can use the Switch application to copy content such as phone numbers addresses calendar items and images from your previous Nokia device to your device The type of content that can be transferred depends on the model of the device from which you want to transfer content If that device supports synchronisation you can also s
40. chat e Not Available to Play You are logged in but currently not available e Logged Out You are not logged in to the network You can receive messages from your N Gage friends even if you are Unavailable or offline To set an availability message for when you are available or not available to play select the message area and enter your message Read and send messages Select Menu gt Applications gt Media gt N Gage To read the new messages from your N Gage friends open the home tab and select New Messages a message and Options gt View Message To send a message to an N Gage friend open the 119 friends tab and select Options gt Send Message The Media 120 maximum length of a message is 115 characters To send the message select Submit Home tab Select Menu gt Applications gt Media gt N Gage When you open the N Gage application the home tab is displayed To start playing the game you last played select Start Game To resume a paused game select Options gt Resume Game To view your current N Gage points total select Track My Progress To view your profile select Options gt View Profile To connect with N Gage players and to invite them to a game select Play With Friends N Gage suggests a friend to play with based on your gaming history and the availability of your N Gage friends To find a different friend to play with select Options gt View My Friends To
41. define the settings manually select Options gt Settings gt Video or Streaming Recorder amp Select Menu gt Applications gt Media gt Recorder 113 Media 114 With the Recorder application you can record voice memos and telephone conversations The recorder cannot be used when a data call or GPRS connection is active To record a sound clip select e To stop recording a sound clip select m To listen to the sound clip select gt To select the recording quality or where you want to Save your sound clips select Options gt Settings Recorded sound clips are saved in the Sound clips folder in Gallery To record a telephone conversation open recorder during a voice call and select e Both parties hear a tone at regular intervals during recording With Flash player you can view play and interact with flash files made for mobile devices To open Flash player and play a flash file select the file To send a flash file to compatible devices select Options gt Send Copyright protection may prevent the sending of some flash files To switch between flash files saved in the device memory or on the memory card scroll to the corresponding tabs To change the flash file quality select Options gt Quality when you are playing the flash file If you select High the playback of some flash files may appear uneven and slow due to their original settings Change the quality setting of such f
42. find out about new games select Get More Games To check for updates to the N Gage application select Options gt Check for updates Manage your profile Select Menu gt Applications gt Media gt N Gage To view your profile open the profile tab Your profile includes the following e Your N Gage point level This indicates your achievement level based on your total N Gage points N Gage points are earned by completing point pickups playing multiplayer matches and participating in community activities To view your N Gage points in detail at the top of the profile view select Options gt Profile details e Your Rep This indicates your gaming reputation as rated by other players e Your Gaming history This displays a list of games you have played To edit the profile details that can be viewed by everyone select Options gt Edit Profile open the public tab and select from the following e Icon Add a profile image to represent you e Motto Adda short personal message e Favorite Game s Enter the names of your favourite games e Device Model This setting is defined automatically and cannot be edited e Show Location Display your city and country in your public profile After you update your profile log in to the N Gage service with your player name to synchronise the profile with the N Gage server Delete games Select Menu gt Applications gt Media gt N Gage To remove a g
43. foot if you have purchased a licence for these extra services select Options gt Start driving or Start walking To save the route select Options gt Save route Save and send locations Select Menu gt Applications gt GPS gt Maps To save a location to your device press the scroll key and select Add gt Add to My places The location is saved in Favourites gt My places To send a location to a compatible device press the scroll key and select Send If you send the location in a text message the information is converted to plain text View your saved items To view the items you have saved to your device select Options gt Favourites Places To view the locations you have saved to your device select My places To organise the saved locations select Options gt Sort To view the selected location on the map press the scroll key and select Show on map To add the location to a route press the scroll key and select Add gt Add to route History To check which locations you have searched for on the map select History To view the selected location on the map press the scroll key and select Show on map To send the location to a compatible device press the scroll key and select Send Collections To create a collection of your favourite places such as restaurants or museums select Collections gt Options gt New collection To add locations to your collection open My places
44. for the selected certificate e Certificate not valid yet The period of validity has not yet begun for the selected certificate e Certificate corrupted The certificate cannot be used Contact the certificate issuer Certificate trust settings Select Menu gt Control panel gt Settings and General gt Security gt Certificate management Trusting a certificate means that you authorise it to verify web pages e mail servers software packages and other data Only trusted certificates can be used to verify services and software CP smportant Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller they must be used correctly in order to benefit from increased security The existence of a certificate does not offer any protection by itself the certificate manager must contain correct authentic or trusted certificates for increased security to be available Certificates have a restricted lifetime If Expired certificate or Certificate not valid yet is shown even if the certificate should be valid check that the current date and time in your device are correct Before changing any certificate settings you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner To change the trust settings select a certificate and Options gt Trust settings Scroll to an application field
45. from Nokia Eseries 34 Home screen In the home screen you can quickly access your most frequently used features and applications and view at a glance if you have missed calls or new messages Home screen In the home screen you can quickly access your most frequently used applications and view at a glance if you have missed calls or new messages Whenever you see the f icon scroll right to access a list of available actions To close the list scroll left The home screen sx consists of the following 1 Application shortcuts To access an application select the shortcut of the application 2 Information area To check an item displayed in the information area select the item 3 Notification area To view the notifications scroll to a box A box is only visible if there are items in it You can define two separate home screens for different purposes for example one screen to show your business e mail and notifications and another to show your personal e mail This way you do not have to see business related messages outside office hours To switch between the home screens select J To define which items and shortcuts you want in the home screen and to set the appearance of the home screen select Menu gt Control panel and Modes Work on the home screen To search for contacts in the home screen start entering the contact s name Select the desired contact from the list of proposed matches
46. if the information is available select On e Add to album Define to which album the captured images are saved e Show captured image To See the image after the capture select Yes To continue capturing images immediately select Off e Default image name Define the default name for the captured images Extended digital zoom The On continuous option allows the zoom increments to be smooth and continuous between the digital and extended digital zoom The Off option allows a limited amount of zoom while retaining the image resolution Capture tone Set the tone that sounds when you capture an image Memory in use Choose where to store your images Restore camera settings Restore the camera settings to the default values Media Video settings Select Menu gt Applications gt Media gt Camera To change the video mode settings select Options gt Settings and from the following Video quality Set the quality of the video clip Select Sharing if you want to send the video clip using a multimedia message The clip is recorded with OCIF resolution in the 3GPP file format and the size is limited to 300 kB approximately 20 seconds You may not be able to send video clips saved in the MPEG 4 file format in a multimedia message Show GPS info To add the location information to the recorded video clip if the information is available select On Audio recording Select Mute if you do
47. level The higher the bar the stronger the charge in the battery You have one or more unread messages in the Inbox folder in Messaging gt Ww You have received new e mail in the remote mailbox There are messages waiting to be sent in the Outbox folder in Messaging You have one or more missed phone calls The keys of the device are locked An alarm is active You have activated the Silent profile and the device does not ring for an incoming call or message Bluetooth connectivity is activated A Bluetooth connection is established When the indicator is blinking your device is trying to connect with another device A GPRS packet data connection is available network service If the icon is 4 the connection is active If the icon is the connection is on hold An EGPRS packet data connection is available network service If the icon is 5 the connection is active If the icon is the connection is on hold Nokia E75 The basics 25 Nokia E75 The basics N A UMTS packet data connection is available network service If the icon is 3 the connection is active If the icon is 3 the connection is on hold High speed downlink packet access HSDPA is supported and available network service The icon may vary between regions If the icon is the connection is active If the icon is 3 the connection is on hold You have set the device to scan for wireless LANs WL
48. model complies with FCC rules governing hearing aid compatibility These require a M3 microphone or higher value Your device M value is shown on the box A higher M value generally indicates that a device model has a lower RF emissions level which may improve the likelihood that the device will operate with certain hearing aids Some hearing aids are more immune than others to interference Please consult your hearing health professional to determine whether your hearing aid will work with this device More information on accessibility can be found at www nokiaaccessibility com RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection electronic antilock braking electronic speed control and air bag systems For more information check with the manufacturer of your vehicle or its equipment Only qualified personnel should service the device or install the device in a vehicle Faulty installation or service may be dangerous and may invalidate your warranty Check regularly that all wireless device equipment in your vehicle is mounted and operating properly Do not store or carry flammable liquids gases or explosive materials in the same compartment as the device its parts or accessories Remember that air bags inflate with great force Do not place your device or accessories in the air bag deployment area Switch off your device before boarding an aircra
49. not hold the device near your ear when the loudspeaker is in use Video sharing requires a UMTS connection For more information on the service UMTS network availability and fees associated with using this service contact your service provider To use video sharing you must do the following e Ensure that your device is set up for person to person connections Ensure you have an active UMTS connection and are within UMTS network coverage If you move outside the UMTS network during a video sharing session the sharing stops while your voice call continues e Ensure that both the sender and recipient are registered to the UMTS network If you invite someone to a Sharing session and the recipient s device is not within UMTS network coverage does not have video sharing installed or person to person connections set up the recipient does not receive invitations You receive an error message that indicates that the recipient cannot accept the invitation To adjust video sharing settings select Menu gt Control panel gt Settings and Connection gt Video sharing To set up video sharing you need person to person and UMTS connection settings Phone 61 Phone 62 Person to person connection settings A person to person connection is also known as a session initiation protocol SIP connection The SIP profile settings must be configured in your device before you can use video sharing Contact your service pr
50. not want to record sound Add to album Define to which album the recorded videos are saved 101 Media 102 e Show captured video View the first frame of the recorded video clip after the recording stops To view the entire video clip select Play from the toolbar e Default video name Define the default name for recorded video clips e Memoryinuse Choose where to store your video clips e Restore camera settings Restore the camera settings to the default values Gallery id Select Menu gt Gallery Use Gallery to access different types of media including images music and video and sound clips All viewed images and videos and received music and sound clips are automatically saved to Gallery Sound clips and music are played in the Music player and video clips and streaming links in the RealPlayer application Images are opened with the image viewer Work with media files and folders Select Menu gt Gallery To open a file or a folder select the item To create a new folder scroll to a file and select Options gt Organise gt New folder You cannot create folders within folders To copy or move files scroll to a file and selectOptions gt Organise and the desired option To download files into Gallery using the web browser select Downl graphics Downld videos Download songs or Downld sounds The web browser opens Select a bookmark or enter the web address of the downlo
51. of applications and software to your device e JME applications based on Java technology with the jad or jar file extensions e Other applications and software suitable for the Symbian operating system with the sis or sisx file extensions Only install software that is compatible with your device You can transfer installation files to your device from a compatible computer download them during browsing or receive them in a multimedia message as an e mail attachment or using other connectivity methods such as Bluetooth connectivity You can use Nokia Application Installer in Nokia PC Suite to install an application to your device Icons in Application manager indicate the following sis or sisx application amp Java application application not fully installed im application installed in the memory card C9 important Only install and use applications and other software from trusted sources such as applications that are Symbian Signed or have passed the Java Verified testing Before installation note the following e To view the application type version number and the supplier or manufacturer of the application select Options gt View details To display the security certificate details of the application select Details gt Certificates gt View details e Ifyou install a file that contains an update or repair to an existing application you can only restore the Original application if you
52. playlist To reorder songs in a playlist scroll to the song you want to move and select Options gt Reorder playlist Nokia Music Store Select Menu gt Applications gt Media gt Music store In the Nokia Music Store network service you can search browse and purchase music to download to your device To purchase music you first need to register for the service To access the Nokia Music Store you must have a valid internet access point defined in the device Nokia Music Store is not available for all countries or regions To find more music in the different categories select Options gt Find in Music store To select the access point to use with the Nokia Music Store select Default access point Transfer music from PC To transfer music from your PC connect your device to the PC using Bluetooth connectivity or a compatible USB data cable If you are using the USB cable select Mass storage as the connection mode Make sure that a compatible memory card is inserted in the device If you selectPC Suite as the connection mode you can use Nokia Music to synchronise music between your device and PC Transfer with Windows Media Player Music synchronisation functions may vary between different versions of the Windows Media Player application For more information see the corresponding Windows Media Player guides and help The following instructions are for Windows Media Player 11 Media 111 Media
53. points to an internet access point group and use the group for browsing the web If you give the WLAN access point the higher priority the device connects to the internet through a WLAN if available and through a packet data connection if not To create a new access point group select Options gt Manage gt New destination To add access points to an access point group select the group and Options gt New access point To copy an existing access point from another group select the group scroll to an existing access point and select Options gt Organise gt Copy to other dest To change the priority order of access points within a group scroll to an access point and select Options gt Organise gt Change priority Packet data access points Select Menu gt Control panel gt Settings and Connection gt Destinations gt Access point and follow the instructions on the display Or open one of the access point groups select an access point marked with lt and select Edit Use the instructions provided by your service provider to edit the following e Access point name The access point name is provided by your service provider e Username The user name may be needed to make a data connection and is usually provided by your service provider e Prompt password If you want to set the device to ask for a password every time you log in toa server or if you do not want to save your password in the devi
54. security software on your device and any connected computer Your device may have preinstalled bookmarks and links for third party internet sites and may allow you to access third party sites These are not affiliated with Nokia and Nokia does not endorse or assume liability for them If you access such sites take precautions for security or content Safety Safety Ed warina To use any features in this device other than the alarm clock the device must be switched on Do not switch the device on when wireless device use may cause interference or danger When using this device obey all laws and respect local customs privacy and legitimate rights of others including copyrights Copyright protection may prevent some images music and other content from being copied modified or transferred Make back up copies or keep a written record of all important information stored in your device When connecting to any other device read its user guide for detailed safety instructions Do not connect incompatible products The images in this guide may differ from your device display Refer to the user guide for other importantinformation about your device The office applications support common features of Microsoft Word PowerPoint and Excel Microsoft Office 2000 XP 2003 and 2007 Not all file formats are supported To use the device you must have service from a wireless service provider Some features are not available
55. select Route selection gt Shorter route To plan a route that combines the advantages of both the shortest and the fastest route select Route selection gt Optimised Map settings Select Menu gt Applications gt GPS gt Maps and Options gt Tools gt Settings gt Map To select the categories of points of interest you want to display on the map select Categories For example to display restaurants select Restaurants To optimise the colour scheme for day or night usage select Colours To select how much of the device memory or space available on the compatible memory card if inserted can be used to store map data select Maximum Travelling 89 Travelling 90 memory use When the memory limit is reached the oldest data is removed To select whether to use the metric or imperial system select System of measurement To update the maps on your device select Options gt Tools gt Settings gt Map gt Options gt Check for map updates or use Nokia Map Loader To update the Maps application visit www nokia com maps With the Nokia Map Loader application you can download maps and voice guidance files from the internet to the device memory or a compatible memory card You must use the Maps application and browse maps at least once before using Nokia Map Loader as Nokia Map Loader uses the Maps information to check which version of the maps to download To install Nokia Map Loader to a comp
56. services to find for example websites and images The content and availability of the services may vary Search settings Select Menu gt Applications gt Search To change the Search application settings select Options gt Settings and from the following e Country or region Select the country or region you want to search from e Connection Select the access point and allow or deny network connections e Search services Select whether service providers and search categories are shown e General Enable or disable tooltips and clear the search history Nokia E75 The basics 21 Nokia E75 The basics 28 Common actions in several applications You can find the following actions in several applications To change the profile or switch off or lock the device press the power Key briefly If an application consists of several tabs see figure open a tab by scrolling right or left To save the settings that you have configured in an application select Back To save a file select Options gt Save There are different saving options depending on the application you use To send a file select Options gt Send You can senda file in an e mail or multimedia message or using different connectivity methods To copy press and hold the shift key and select the text with the scroll key Press and hold the shift key and select Copy To paste scroll to where you want to paste th
57. the WLAN to which you connect WPA security settings Select WPA WPA2 as the WLAN security mode Select WLAN security settings and from the following e WPA WPA2 Select EAP Extensible Authentication Protocol or Pre shared key a secret key used for device identification EAP plug in settings If you select WPA WPA2 gt EAP select which EAP plug ins defined in your device to use with the access point e Pre shared key If you select WPA WPAZ2 gt Pre shared key enter the shared private key that identifies your device to the WLAN to which you connect e WPA2 only mode To allow both TKIP and AES Advanced Encryption Standard encryption select Off To allow AES only select On Wireless LAN plugins Select Menu gt Control panel gt Settings and Connection gt Destinations and an access point group The extensible authentication protocol EAP plug ins are used in wireless networks to authenticate wireless devices and authentication servers and the different EAP plug ins make possible the use of various EAP methods network service You can view the EAP plug ins currently installed in your device network service EAP plug ins 1 To define the EAP plug in settings select Options gt New access point and define an access point that uses WLAN as a data bearer 2 Select 802 1x or WPA WPA2 as the security mode 3 Select WLAN security settings gt WPA WPA2 gt EAP gt EAP plug in settin
58. the active call press the end key To make a call enter the phone number including the area code and press the call key Tip For international calls add the character that replaces the international access code and enter the country code area code omit the leading 0 if necessary and phone number To end the call or cancel the call attempt press the end key To make a call using the saved contacts open the contacts Enter the first letters of the name scroll to the name and press the call key To make a call using the log press the call key to view up to 20 numbers that you last called or attempted to call Scroll to the desired number or name and press the call key To adjust the volume of an active call use the volume keys To switch from a voice call to a video call select Options gt Switch to video call The device ends the voice call and makes a video call to the recipient 1 To make a conference call enter a participant s phone number and press the call key Phone 59 Phone 60 2 When the participant answers select Options gt New call 3 When you have made a phone call to all the participants select Options gt Conference to merge the calls into a conference call To mute the microphone during the call press the mute key To drop a participant from the conference call select Options gt Conference gt Drop participant and the participant To discuss privately with
59. the air but others must be first downloaded to your device To download a video clip select Options gt Download Downloads continue in the background if you exit the application The downloaded video clips are saved in My videos To stream a video clip or view a downloaded one select Options gt Play When the video clip is playing use the selection keys and the scroll key to control the player To adjust the volume use the volume key Ed warning Continuous exposure to high volume may damage your hearing Listen to music at a moderate level and do not hold the device near your ear when the loudspeaker is in use Select Options and from the following e Resume download Resume a paused or failed download e Cancel download Cancel a download e Preview Preview a video clip This option is available if supported by the service e Feed details View information about a video clip e Refresh list Refresh the list of video clips e Open link in browser Open a link in the web browser Schedule downloads Setting the application to download video clips automatically may involve the transmission of large amounts of data through your service provider s network For information about data transmission charges contact your service provider To schedule an automatic download for video clips in a service select Options gt Schedule downloads Video centre automatically downloads new video clips daily
60. to another device or computer High speed downlink packet access HSDPA also called 3 5G indicated by 3 56 is a network service in UMTS networks and provides high speed data downloads When HSDPA support in the device is activated and the device is connected to a UMTS network that supports HSDPA downloading data such as messages e mail and browser pages through the cellular network may be faster An active HSDPA connection is indicated by The icon may vary between regions To turn HSDPA on or off select Menu gt Control panel gt Settings and Connection gt Packet data gt High speed packet access Some cellular networks do not allow incoming voice calls when HSDPA is active in which case you need to deactivate HSDPA to receive calls For more information contact your service provider For availability and subscription to data connection services contact your service provider HSDPA only affects the download speed sending data to the network such as messages and e mail is not affected To avoid damaging the data do not remove the data cable in the middle of a data transfer Transfer data between your device and a PC 1 Insert a memory card to your device and connect the device to a compatible PC with the USB data cable 2 When the device asks which mode is used select Mass storage In this mode you can see your device as aremovable hard drive in your computer 3 End the connection from the computer
61. use a compatible connected accessory such as a Car kit to make or receive calls Your wireless device will not make any calls except to the emergency numbers programmed into your device while in this mode To make calls you must first leave the remote SIM mode If the device has been locked enter the lock code to unlock it first 1 Select Options gt New paired device The device Starts to search for Bluetooth devices within range If you have sent data using Bluetooth connectivity before a list of the previous search results is displayed To search for more Bluetooth devices select More devices 2 Select the device with which you want to pair and enter the passcode The same passcode must be entered to the other device as well 3 Select Yes to make the connection between your device and the other device automatic or No to confirm the connection manually every time a connection attempt is made After pairing the device is saved to the paired devices page To give a nickname to the paired device select Options gt Assign short name The nickname is displayed in your device To delete a pairing select the device whose pairing you want to delete and Options gt Delete To delete all pairings select Options gt Delete all If you are currently connected to a device and cancel the pairing with that device pairing is removed immediately and the connection is ended To allow a paired device to connect automatical
62. AN and a WLAN is available A WLAN connection is active in a network that does not have encryption A WLAN connection is active in a network that has encryption Your device is connected to a computer with a USB data cable The second phone line is being used network service A All calls are forwarded to another number If 26 4 you have two phone lines a number indicates the active line A headset is connected to the device A hands free car kit is connected to the device A loopset is connected to the device A text phone is connected to the device Your device is synchronising You have an ongoing push to talk connection Your push to talk connection is in the do not disturb mode because the ringing type of your device is set to Beep once or Silent or you have anincoming or ongoing phone call In this mode you cannot make PTT calls The input methods provided in the device may vary according to different sales markets Your device has a full keyboard To insert punctuation marks press the corresponding key or a combination of keys To switch between character cases press the shift key To insert characters printed at the top of keys press and hold the corresponding key or press and hold the function key and press the corresponding key To erase a Character press the backspace key To erase several characters press and hold the backspace Key To insert characters not shown on the keyboard
63. Control panel gt Settings and General gt Security gt Phone and SIM card gt Remote phone locking gt Enabled Enter the remote lock message and confirm the message The message must be at least 5 characters long Write down the text as you may need it later Memory card security Select Menu gt Office gt File mgr You can protect a memory card with a password to prevent unauthorised access To set a password select Options gt Memory card password gt Set The password can be up to 8 characters long and is case sensitive The password is stored in your device You do not need to enter it again while you use the memory card on the same device If you use the memory card on another device you are asked for the password Not all memory cards support password protection To remove the memory card password select Options gt Memory card password gt Remove When you remove the password the data on the memory card is not protected against unauthorised use To open a locked memory card select Options gt Unlock memory card Enter the password If you cannot recall the password to unlock a locked memory card you may reformat the card in which case the card is unlocked and password removed Formatting a memory card deletes all data stored on the card Encryption Select Menu gt Control panel gt Phone gt Encryption Encrypt your device or memory card to prevent outsiders from accessing your important i
64. Friends By To rate a player select Options gt Rate Player Play and manage games Select Menu gt Applications gt Media gt N Gage To play and manage your games open the games tab There are five types of games Full games that you have purchased with a full licence e Trial games that you can access only for a limited time or that have limited content e Demo games that are smaller sections of a game with only a very limited set of features and levels e Expired games that you have purchased witha limited licence which has now expired e Unavailable games that you have removed or installed incompletely To install a game select Options gt Install Game To play a game select Options gt Start Game To resume a paused game select Options gt Resume Game To rate and review a game select Options gt Rate Game You can rate the game on a scale of one to five stars and write a review The maximum length of the review is 60 characters To submit the review you must be logged in to the N Gage service with your player name To recommend a game to an N Gage friend select Options gt Send Recommendation Set availability Select Menu gt Applications gt Media gt N Gage To set your availability through the N Gage application open the profile tab select Options gt Set Online Status and from the following e Available to Play You are logged in to the network and available to play or
65. LAN Disconnect the active connection to the WLAN e Details View the details of the WLAN C9 important Always enable one of the available encryption methods to increase the security of your wireless LAN connection Using encryption reduces the risk of unauthorised access to your data Use the WLAN wizard in the home screen In the home screen the WLAN wizard shows the status of your WLAN connections and network searches If the WLAN wizard is not activated by default in the home screen you can activate it in the home screen settings To view the available options select the row showing the status Depending on the status you can start the web browser using a WLAN connection connect to your net call service disconnect from a WLAN search for WLANS or enable or disable network scanning If WLAN scanning is disabled and you are not connected to any WLAN WLAN scanning off is displayed in the home screen To enable WLAN scanning and to search for available WLANs select the row showing the status To Start a search for available WLANS select the row showing the status and Search for WLAN To disable WLAN scanning select the row showing the status and Switch WLAN scan off When Start web browsing or Use for is selected the WLAN wizard automatically creates an access point for the selected WLAN The access point can also be used with other applications requiring WLAN connection If you select a secured WLAN you a
66. Nokia E75 User Guide Issue 3 2009 Nokia All rights reserved DECLARATION OF CONFORMITY Hereby NOKIA CORPORATION declares that this RM 412 product is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC A copy of the Declaration of Conformity can be found at http www nokia com phones declaration_of_conformity Nokia Nokia Connecting People Eseries Nokia E75 and N Gage are trademarks or registered trademarks of Nokia Corporation Nokia tune is a sound mark of Nokia Corporation Other product and company names mentioned herein may be trademarks or tradenames of their respective owners Reproduction transfer distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited Nokia operates a policy of continuous development Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice US Patent No 5818437 and other pending patents T9 text input software Copyright 1997 2009 Tegic Communications Inc All rights reserved symbian This product includes software licensed from Symbian Software Ltd 1998 2009 Symbian and Symbian OS are trademarks of Symbian Ltd S lt Java POWERED Java and all Java based marks are trademarks or registered trademarks of Sun Microsystems Inc Portions of the Nokia Maps software are 1996 2009 The Free
67. Nokia battery purchase it from a Nokia authorised service centre or dealer and inspect the hologram label using the following steps 1 When you look at the hologram on the label you should see the Nokia connecting hands symbol from one angle and the Nokia Original Enhancements logo when looking from another angle 2 When you angle the hologram left right down and up you should see 1 2 3 and 4 dots on each side respectively Successful completion of the steps is not a total assurance of the authenticity of the battery If you cannot confirm authenticity or if you have any reason to believe that your Nokia battery with the hologram on the label is not an authentic Nokia battery you should refrain from using it and take it to the nearest Nokia authorised service centre or dealer for assistance To find out more about original Nokia batteries see www nokia com battery Battery 167 Taking care of your device 168 Your device is a product of superior design and craftsmanship and should be treated with care The following suggestions will help you protect your warranty coverage Keep the device dry Precipitation humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits If your device does get wet remove the battery and allow the device to dry completely before replacing it Do not use or store the device in dusty dirty areas Its moving parts and electr
68. Personalise gt Ringing volume Your new Nokia Eseries device contains new versions of the Calendar Contacts and E mail applications as well as anew home screen Your new Nokia E75 helps you manage your business and personal information Some of the key features are highlighted here Read and reply to your e mail while on the move Stay up to date and plan your meetings with the Calendar application Manage your business partners and free time friends with the Contacts application Make calls using voice over IP services with the Internet call application Connect to a wireless LAN WLAN with the WLAN wizard application E fe Work with documents spreadsheets and presentations with the Quickoffice application K 8 OVW CE TA Add new business applications to your Nokia E75 with the Download application Find points of interest with the Maps application Switch from business to personal mode Edit the appearance and setup of your home screen with the Modes application Browse your company intranet with the Intranet application Move your contact and calendar information from a previous device to your Nokia E75 with the Switch application Check the available updates for applications and download them to your device with the Application update application Encrypt your device or memory card to prevent outsiders from accessing your important information New from Nokia Eseries New
69. Share online service may vary Subscribe to services Select Menu gt Applications gt Media gt Share online To subscribe to an online sharing service go to the service provider s website and check that your Nokia device is compatible with the service Create an account as instructed on the website You receive a user name and password needed to set up your device with the account 1 To activate a service open the Share online application in your device select a service and Options gt Activate 2 Allow the device to create a network connection If you are prompted for an internet access point select one from the list 3 Signin to your account as instructed on the service provider s website For the availability and cost of the third party services and data transfer costs contact your service provider or the relevant third party Manage your accounts To view your accounts select Options gt Settings gt My accounts To create a new account select Options gt Add new account To change your user name or password for an account select the account and Options gt Open To set the account as the default when sending posts from your device select Options gt Set as default To remove an account select the account and Options gt Delete Media 103 Media 104 Create a post Select Menu gt Applications gt Media gt Share online To post media files to a service select a servi
70. Type Project All rights reserved This product is licensed under the MPEG 4 Visual Patent Portfolio License i for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG 4 Visual Standard by a consumer engaged in a personal and noncommercial activity and ii for use in connection with MPEG 4 video provided by a licensed video provider No license is granted or shall be implied for any other use Additional information including that related to promotional internal and commercial uses may be obtained from MPEG LA LLC See http www mpegla com TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL INCIDENTAL CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED THE CONTENTS OF THIS DOCUMENT ARE PROVIDED AS IS EXCEPT AS REQUIRED BY APPLICABLE LAW NO WARRANTIES OF ANY KIND EITHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE ARE MADEIN RELATION TO THE ACCURACY RELIABILITY OR CONTENTS OF THIS DOCUMENT NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE Reverse engineering of software in the device is prohibited to the extent permitted by applicable law Insofar as this user guide contains any limitations on Nokia s representations warranties da
71. You must first activate speed dialling in Menu gt Control panel gt Settings and Phone gt Call gt Speed dialling Web shortcuts for keypad oominthepaoe Zoom out the page Go to the homepage Open the bookmarks folder Open the search dialog Return to the previous page View the page overview Open the dialog for entering a new web address Web shortcuts for keyboard Zoom in the page foomautthepage In 6orotmenomepage p 0pente bookmaris tolder ff 0venthesearch diag Create a reply message to the sender of the e mail message Create a reply message to the sender and all other recipients Shortcuts Forward the e mail message pe Return to the previous page View the page overview Open the dialog for entering a new web address Change the follow up status of the Gallery message C feoomin fome a Serolet inthe zoomed image 6 crorightin the zoomed image 2 scroltupinthezoomedimage 8 scrot down in tne zoomed image 3 __ Rotatecokwise Open the list of e mail folders for E mail moving messages Create a new e mail message D Remove the selected e mail messages E Accept a meeting request lies Selatan se eect tase NM tes eaten ee oa ae ee 155 Open the next e mail message Open the previous e mail message Open the selected e mail message Move up one page in the e mail message Move down one page in the e mail message Move to the first e mail messa
72. a conference call participant select Options gt Conference gt Private and the participant Voice mail 5 Select Menu gt Control panel gt Phone gt Call mailbox When you open the Voice mail application network service for the first time you are asked to enter the number of your voice mailbox To call your voice mailbox scroll to Voice mailbox and select Options gt Call voice mailbox If you have configured net call settings to your device and have an internet call mailbox to call the mailbox scroll to the mailbox and select Options gt Call internet call mbx To call your mailbox in the home screen press and hold 1 or press 1 and then the call key Select the mailbox you want to call To change the mailbox number select the mailbox and Options gt Change number Video calls About video calls To be able to make a video call you need to be in the coverage of a UMTS network For availability and subscription to video call services contact your service provider While talking you can see a real time two way video between you and the recipient of the call if the recipient has a compatible device The video image recorded by the camera in your device is shown to the video call recipient A video call can only be made between two parties Make a video call To make a video call enter the phone number or select the recipient from the contacts list and Options gt Call gt Video call When the vid
73. act and the desired number The device creates voice tags for the applications listed in the Voice commands application To launch an application using a voice command press and hold the mute key and clearly say the name of the application If the recognised application was not correct select another application from the proposed matches or select Quit to cancel To change the voice command of an application select Options gt Change command and enter the new command Select Menu gt Control panel gt Phone gt Voice comm The device creates a voice tag for each profile To activate a profile using a voice command press and hold the mute key in the home screen and say the name of the profile Phone 67 Phone 68 To change the voice command select Profiles gt Options gt Change command ws LEL I eats he SCR rNnmRmMN an ahK fe a a Ae vA a LA a C T J o Feo a D wa a Ss Gs T Ow l ud es C amp Select Menu gt Control panel gt Phone gt Voice comm Select Options gt Settings and from the following e Synthesiser Activate the synthesiser that plays recognised voice commands e Playback volume Adjust the speech volume e Recognition sensitivity Adjust the voice command recognition sensitivity e Command verification Select whether the voice commands are accepted automatically manually or by voice verification e Remove voice adap
74. ad site To search for a file select Options gt Find Write the item you are searching for Matching files are displayed Shortcut To select files press View images Select Menu gt Gallery To open an image for viewing select Options gt Open To open the next or previous image for viewing scroll right or left To zoom the image in or out select Options gt Zoom in orZoom out To rotate the image clockwise or anticlockwise by 90 degrees select Options gt Rotate gt Right orLeft Manage image files To view detailed information about the image select Options gt View details To send the image select Options gt Send and the method for sending To rename the image select Options gt Rename To set the image as the display background select Options gt Use image gt Set as wallpaper To add the image to a contact select Options gt Use image gt Assign to contact The Contacts application opens and you can select the contact for the image Share online About Share online Select Menu gt Applications gt Media gt Share online With Share online network service you can post your images video clips and sound clips from your device to compatible online sharing services such as albums and blogs You can also view and send comments to the posts in these services and download content to your compatible Nokia device The supported content types and the availability of the
75. aired device or Hidden to receive data from a paired device only When you receive data through Bluetooth connectivity depending on the settings of an active profile a tone sounds and you are asked if you want to accept the message in which the data is included If you accept the message is placed in the Inbox folder in the Messaging application Tip You can access the files in the device or on the memory card using a compatible accessory that supports the File Transfer Profile Client service for example a laptop computer A Bluetooth connection is disconnected automatically after sending or receiving data Only Nokia PC Suite and some accessories such as headsets may maintain a connection even if not actively used Select Menu gt Control panel gt Connectivity gt Bluetooth Open the paired devices tab Before pairing decide on your own passcode 1 16 digits and agree with the user of the other device to use the same code Devices that do not have a user interface have a fixed passcode You need the passcode only when you connect the devices for the first time After pairing it is possible to authorise the connection Pairing and authorising the connection makes connecting quicker and easier as you do not have to accept the connection between paired devices every time you establish a connection The passcode for remote SIM access must have 16 digits When the wireless device is in the remote SIM mode you can only
76. ake phone calls and launch applications profiles or other functions on the device To start voice recognition press and hold the mute key The device creates a voice tag for the entries in Contacts and for the functions designated in the Voice commands application When a voice command is spoken the device compares the spoken words to the voice tag stored in the device Voice commands are not dependent on a speaker s voice however the voice recognition in the device adapts to the main user s voice to recognise voice commands better A voice tag for a contact is the name or nickname that is saved for the contact in the contacts list Oo Using voice tags may be difficult in a noisy environment or during an emergency so you should not rely solely upon voice dialling in all circumstances To listen to a voice tag select a contact and Options gt Voice tag details gt Play voice tag 1 To make a call using a voice command press and hold the mute key 2 When you hear the tone or see the visual display clearly say the name saved for the contact 3 The device plays a synthesised voice tag for the recognised contact in the selected device language and displays the name After a time out period of 1 5 seconds the device dials the number If the recognised contact was not correct select another contact from the proposed matches or select Quit to cancel dialling If several numbers are saved for the contact select the cont
77. al not a fault Q Why can t I find my friend s device while using Bluetooth connectivity A Check that both devices are compatible have activated Bluetooth connectivity and are not in the hidden mode Check also that the distance between the two devices is not over 10 metres 33 feet and that there are no walls or other obstructions between the devices Q Why can t I close a Bluetooth connection A If another device is connected to your device you can close the connection using the other device or by deactivating Bluetooth connectivity Select Menu gt Control panel gt Connectivity gt Bluetooth and Bluetooth gt Off Q Why can t I see a WLAN access point even though I know I m within its range A Check that the Offline profile is not in use in your device The wireless LAN WLAN access point may use a hidden service set identifier SSID You can only access networks that use a hidden SSID if you know the correct SSID and have created a WLAN access point for the network on your Nokia device Check that the WLAN access point is not on channels 12 13 as they cannot be associated with Q How do I turn WLAN off on my Nokia device A The WLAN on your Nokia device is deactivated when you are not connected or trying to connect to another access point or not scanning for available networks To further reduce battery consumption you can specify that your Nokia device does not scan or scans less Trou
78. alls after your device rings for a specified length of time Select the length of time for the device to ring before diverting the call e If out of reach Divert calls when the device is switched off or out of network coverage e Ifnotavailable Divert calls if you have an active call do not answer or the device is switched off or out of network coverage To divert calls to your voice mailbox select a call type a diverting option andOptions gt Activate gt To voice mailbox To divert calls to another phone number select a call type a diverting option and Options gt Activate gt To other number Enter the number or select Find to retrieve a number saved in Contacts To check the current diverting status scroll to the diverting option and select Options gt Check status To stop diverting calls scroll to the diverting option and select Options gt Deactivate Phone Call barring Select Menu gt Control panel gt Settings and Phone gt Call barring You can bar the calls that can be made or received with the device network service To change the settings you need the barring password from your service provider Call barring affects all call types Select from the following e Outgoing calls Prevent making voice calls with your device e International calls Prevent calling to foreign countries or regions e International calls except to home country Prevent calls to foreign coun
79. ame from your device open the games tab and select Options gt Remove Game When you remove a game the game saves and other associated game data remain in the device and the removed game is shown as Unavailable in the games list You can download and reinstall the game again if the licence is still valid To remove a game completely from your device select Options gt Delete Game All associated game data is removed from the device and N Gage service including your rankings N Gage points and point pickups Edit the N Select Menu gt Applications gt Media gt N Gage Open the profile tab select Options gt N Gage Settings and from the following e Player Name Edit your player name You can only edit your player name before you log in to the N Gage service for the first time e Personal Settings Define your personal details which are not shown in your public profile and subscribe to the N Gage newsletter You can also define whether you want to receive notifications from your N Gage friends while you are playing games e Connection Settings Allow N Gage to connect to the network automatically when needed and define your preferred access point and the data transfer limit that triggers an alert e Account Details Set your purchase preferences 5 e settin gs Media 121 ivity Connect 122 Your device offers several options to connect to the internet a corporate intranet or
80. as a coin clip or pen causes direct connection of the positive and negative terminals of the battery These look like metal strips on the battery This might happen for example when you carry a spare battery in your pocket or purse Short circuiting the terminals may damage the battery or the connecting object Disposal Do not dispose of batteries in a fire as they may explode Dispose of batteries according to local regulations Please recycle when possible Do not dispose as household waste Leak Do not dismantle cut open crush bend puncture or shred cells or batteries In the event of a battery leak prevent battery liquid contact with skin or eyes If this happens flush the affected areas immediately with water or seek medical help Damage Do not modify remanufacture attempt to insert foreign objects into the battery or immerse or expose it to water or other liquids Batteries may explode if damaged Correct use Use the battery only for its intended purpose Improper battery use may result in a fire explosion or other hazard If the device or battery is dropped especially on a hard surface and you believe the battery has been damaged take it to a service centre for inspection before continuing to use it Never use any charger or battery that is damaged Keep your battery out of the reach of small children Always use original Nokia batteries for your safety To check that you are getting an original
81. ase and lowercase alphabets are possible The device notifies you if the lock code is not properly formatted Settings Restore original settings To restore the original device settings select Menu gt Control panel gt Settings and General gt Factory settings To do this you need your device lock code After resetting the device may take a longer time to switch on Documents contact information calendar entries and files are unaffected Positioning settings Select Menu gt Control panel gt Settings and General gt Positioning To use a Specific positioning method to detect the location of your device select Positioning methods To select a positioning server select Positioning server To define the measurement system and coordinate format for location notations select Notation preferences Slide handling Select Menu gt Control panel gt Settings and General gt Slide handling 143 Settings 144 To select which application is opened when you open the slide select Opening the slide To set the device to keep the active application open when you close the slide select Closing the slide To set the device to activate the loudspeaker when you open the slide select Audio chng when opened To set the device to deactivate the loudspeaker when you close the slide select Audio chng when closed To set the device to lock the keypad when you close the Slide select Keyguard activation To se
82. ate than with GPS and you cannot use the location as a Starting point for navigation To use the mobile network for positioning select the network based positioning method from the device settings When you start the Maps application and your GPS connection is ready GPS replaces mobile network as the positioning method Select Menu gt Applications gt GPS gt Maps To zoom in to your GPS position or your last known location select Options gt My position When the GPS connection is active shows your current location on the map To move on the map scroll up down left or right with the scroll key The map is oriented towards north by default When you have an active connection and browse the map a new map is automatically downloaded if you scroll to an area which is not covered by maps already downloaded The maps are automatically saved in the device memory or on a compatible memory card if inserted To zoom in and out on the map with the keypad press and To zoom in and out on the map with the keyboard press the Shift and backspace keys The GPS indicator aii shows the availability of the satellite signals One bar is one satellite When the device tries to find satellite signals the bar is yellow When the device receives enough data from the satellites for GPS to calculate your location the bar turns green The more green bars the more reliable the location calculation Initially your device
83. ate or deactivate the warning tones This setting also affects the tones of some games and Java applications Alert for Set the device to ring only upon calls from phone numbers that belong to a selected contact group Phone calls coming from outside that group have a silent alert e PTT call alerttone Select a ringing tone for push to talk calls e Push to talk status Set the push to talk status to each profile e Opening sound Select a tone that sounds when you open the slide e Closing sound Select a tone that sounds when you close the slide Profile name Enter a name to a new profile or rename an existing profile The General and Offline profiles cannot be renamed Personalise the home screen Select Menu gt Control panel gt Modes To change the name of the current home screen select Options gt Rename mode To select which applications and notifications you want to see in the home screen select Home screen applications To change the theme of the home screen currently in use select General theme To change the background image of the home screen currently in use select Wallpaper To change from one home screen to another scroll to Current mode and select Options gt Change Change the display theme amp Select Menu gt Control panel gt Themes Select from the following e General Change the theme used in all applications e Menu view Change the the
84. atible computer go to www nokia com maps and follow the instructions on the display To change the map type press 1 To return to your current location press 0 To adjust the map for car navigation during daytime or night time press 3 To find a different route in car navigation press 5 To adjust the volume of voice guidance in car navigation press 6 To add a stopover to the route in car navigation press To view information about traffic incidents in car navigation press 8 To check the route information in car navigation press 9 To zoom in on the map press the left shift key To zoom out on the map press the right shift key To repeat the voice guidance in car navigation press 4 To save the current place in car navigation press 2 Nokia Office Tools Nokia Office Tools support mobile business and enable effective communication with work teams Active notes y Select Menu gt Office gt Active notes Active notes allows you to create edit and view different kinds of notes for example meeting memos hobby notes or shopping lists You can insert images videos and sound in the notes You can link notes to other applications such as Contacts and send notes to others Create and edit notes Select Menu gt Office gt Active notes To create a note start writing To edit a note select the note and Options gt Editing options To add boldface italics or underlining to your text or
85. ation scroll to the service and select Change e Availability requests Select whether to automatically accept all incoming presence requests without a confirmation query e Service information View technical information about the selected service Speed dialling 4 Speed dialling allows you to make a call by pressing and holding a number key in the home screen To activate speed dialling select Menu gt Control panel gt Settings and Phone gt Call gt Speed dialling To assign a phone number to a number key do the following 1 Select Menu gt Control panel gt Phone gt Speed dial 2 Scroll to a number key 2 9 on the display and select Options gt Assign 3 Select the desired number from the contacts list To remove or change the phone number assigned to a number key scroll to the speed dialling key and select Options gt Remove or Change Call divert Select Menu gt Control panel gt Settings and Phone gt Call divert Divert incoming calls to your voice mailbox or to another phone number For details contact your service provider Select the type of calls to divert and from the following All voice calls All data and video calls or All fax calls Divert all incoming voice data video or fax calls You cannot answer the calls only divert the calls to another number e Ifbusy Divert incoming calls if you have an active Call e Ifnotanswered Divert incoming c
86. ation files to a compatible computer Images and video clips in Gallery Back up the files to a compatible computer using Nokia PC Suite Find help 23 Nokia E75 The basics 24 Nokia E75 The basics Phone setup es When you switch on your device for the first time the Phone setup application opens To access the Phone setup application later select Menu gt Help gt Phone setup To set up the device connections select Settings wizard To transfer data to your device from a compatible Nokia device select Phone switch The available options may vary Settings wizard Select Menu gt Control panel gt Sett wizard Use Settings wizard to define e mail and connection settings The availability of the items in Settings wizard depends on the features of the device SIM card service provider and the data in the Settings wizard database To start Settings wizard select Start To get the best results when using the settings wizard keep your SIM card inserted in the device If the SIM card is not inserted follow the instructions on the display Select from the following e Operator Define the operator specific settings such as MMS internet WAP and streaming settings e E mail setup Configure a POP IMAP or Mail for Exchange account e Push to talk Configure push to talk settings e Video sharing Configure video sharing settings The settings available for editing may vary
87. avigating select a location and Drive to or Walk to To stop navigating select Options gt Stop navigation A amp j My 4 tab Y o f i wW W GA a CLU VUI UY Ww Iid LIWII The walking route ignores any possible limitations to car navigation such as one way streets and turn restrictions and includes areas such as pedestrian zones and parks It also prioritises walkways and smaller roads and omits highways and motorways The route is drawn to the map and the arrow indicates the direction The dots show in which direction you are walking The length of a walking route is limited to a maximum of 50 kilometres 31 miles and the travelling speed to a maximum of 30 km h 18 miles h If the speed limit is exceeded navigation stops and is resumed once the speed is back within limits There is no voice guidance available for pedestrian navigation To purchase a licence for pedestrian navigation select Options gt Extras gt Walk The licence is region specific and can be used only in the selected area You can pay for the licence through a credit card or in your phone bill if supported by your service provider To start navigating scroll to a location press the scroll key and select Walk to This service is available when you have purchased it To find an alternative route select Options gt Different route To stop navigating select Stop navigation fal j w A J Frey aA pi P gt gas ae
88. ble Depending on the type of the device that is used for charging it may take a while for charging to start 2 If the device is switched on select the desired USB mode Use amemory card to save the memory on your device You can also back up information from your device to the memory card Use only compatible microSD cards approved by Nokia for use with this device Nokia uses approved industry standards for memory cards but some brands may not be fully compatible with this device Incompatible cards may damage the card and the device and corrupt 1 Press the power key briefly and select Remove data stored on the card memory card Keep all memory cards out of the reach of micro 2 Open the cover of the memory card slot small children 3 Press the end of the memory card to release it from Check the compatibility of a memory card micro the memory card slot and remove the card with its manufacturer or provider S2 4 Close the cover of the memory card slot A compatible memory card may be included in the sales package The memory card may be already inserted in the device If not do the following 1 Open the cover ot the HEMON card slot 1 Press and hold the power key until you feel the device Ee vibrate 2 If prompted enter the PIN code or lock code and select OK 3 When prompted enter the country in which you are located and the current date and time To find your f m a a
89. bleshooting 161 Troubleshooting 162 often for available networks in the background The WLAN is deactivated in between background scans To stop the background scans select Menu gt Control panel gt Settings and Connection gt Wireless LAN gt Show WLAN availability gt Never You can still manually scan for available WLANs and connect to them as usual To increase the background scan interval select Show WLAN availability gt Yes and define the interval in Scan for networks Q Why can t I browse the web even though the WLAN connection is working and the IP settings are correct A Check that you have defined the HTTP HTTPS proxy settings correctly in the advanced settings of your WLAN access point Q How do I check the signal quality of my WLAN connection Select Menu gt Control panel gt Connectivity gt Conn mgr and Active data connections gt Options gt Details If the signal quality is weak or moderate you may encounter connection problems Try again closer to the access point Q Why do I have problems with the security mode A Check that you have configured the security mode correctly and that it is the same that the network uses To check the security mode the network uses select Menu gt Control panel gt Connectivity gt Conn mor and Active data connections gt Options gt Details Check also the following you have the correct WPA mode preshared key or EAP you have d
90. bout your visits to various web pages select Options gt Clear privacy data gt Cookies 15 Internet 16 Connection security If the security indicator f is displayed during a connection the data transmission between the device and the internet gateway or server is encrypted The security icon does not indicate that the data transmission between the gateway and the content server where the data is stored is secure The service provider secures the data transmission between the gateway and the content server Security certificates may be required for some services such as banking services You are notified if the identity of the server is not authentic or if you do not have the correct security certificate in your device For more information contact your service provider CP important Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller they must be used correctly in order to benefit from increased security The existence of a certificate does not offer any protection by itself the certificate manager must contain correct authentic or trusted certificates for increased security to be available Certificates have a restricted lifetime If Expired certificate or Certificate not valid yet is shown even if the certificate should be valid check that the current date and time in your device are correct Before changing any certificate settings
91. brary is selected for synchronisation If there is not enough free memory in your device Windows Media Player selects manual synchronisation automatically To stop automatic synchronisation click the Sync tab and select Stop Sync to Nokia Handset Select Menu gt Applications gt Media gt Music player and Options gt Go to Now playing gt Options gt Equaliser To use a preset frequency setting when playing music select the frequency setting you want to use and Options gt Activate To modify the frequency of a preset setting select Options gt Edit anda frequency band and scroll up or down to adjust its value You hear your frequency adjustment immediately in the playback To reset the frequency bands to their original values select Options gt Reset to defaults To create your own frequency setting select Options gt New preset Enter a name for the frequency setting Scroll up or down to move between the frequency bands and set the frequency for each band RealPlayer Select Menu gt Applications gt Media gt RealPlayer RealPlayer plays video and sound clips that are stored on your device transferred from an e mail message or a compatible computer or streamed to your device over the web Supported file formats include MPEG 4 MP4 not streaming 3GP RV RA AMR and Midi RealPlayer does not necessarily support all variations of a media file format Play video clips and stream links
92. ce select Yes e Password A password may be needed to make a data connection and is usually provided by your service provider e Authentication Select Secure to always send your password encrypted or Normal to send your password encrypted when possible e Homepage Depending on the access point type you are setting up enter the web address or the address of the multimedia message centre e Use access point Select After confirmation to set the device to ask for confirmation before the connection using this access point is created or Automatically to set the device to connect to the destination using this access point automatically Select Options gt Advanced settings and from the following e Network type Select the internet protocol type to transfer data to and from your device The other settings depend on the selected network type Settings 147 Settings 148 e Phone IP address for IPv4 only Enter the IP address of your device e DNS addresses Enter the IP addresses of the primary and secondary DNS servers if required by your service provider To obtain these addresses contact your internet service provider e Proxy server address Enter the address of the proxy server Proxy port number Enter the port number of the proxy server WLAN internet access points Select Menu gt Control panel gt Settings and Connection gt Destinations gt Access point and follow the in
93. ce and Options gt New upload If the online sharing service provides channels for posting files select the desired channel To add an image video clip or sound clip to the post select Options gt Insert Enter a title or description for the post if available To add tags to the post select Tags To enable the posting of location information contained in the file select Location To set the level of privacy for a file select Privacy To allow everyone to view your file select Public To restrict others from seeing your files select Private You can define the Default setting on the service provider s website To send the post to the service select Options gt Upload Post files from Gallery You can post your files from Gallery to an online sharing service 1 Select Menu gt Gallery and the files you want to post 2 Select Options gt Send gt Upload and the desired account 3 Edit your post as required 4 Select Options gt Upload One click upload One click upload lets you post images to an online Sharing service immediately after capturing them To use one click upload capture an image with your device camera and select the online sharing icon from the toolbar Tag list Select Menu gt Applications gt Media gt Share online Tags describe the content of the post and help viewers find content in the online sharing services To view the list of available tags when creating a p
94. clip or Play video clip To view the name and size of an attachment select the message and Options gt Objects To save a multimedia object select Options gt Objects the object and Options gt Save Special message types Select Menu gt Messaging You can receive special messages that contain data such as operator logos ringing tones bookmarks or internet access or e mail account settings To save the contents of these messages select Options gt Save Service messages Service messages are sent to your device by service providers Service messages may contain notifications such as news headlines services or links through which the message content can be downloaded To define the service message settings select Options gt Settings gt Service message To download the service or message content select Options gt Download message To view information about the sender web address expiration date and other details of the message before downloading it select Options gt Message details Send service commands You can send a service request message also Known as a USSD command to your service provider and request activation for certain network services Contact your service provider for the service request text To send a service request message select Options gt Service commands Enter the service request text and select Options gt Send Messaging 51 Messaging 52 Cell broa
95. contacts gt Netw grps channels To connect to a public pre configured network group or channel for the first time you must first create the group or channel Select Options gt Add existing and enter the required information After the link to the group has been created you can attempt to join the group WF Vise we as a i A E RUG As li ap S TA Network groups consist of pre configured lists of members that are stored on the server You can define participants by adding them to the member list When you want to talk to a network group you can select the group and make a call to it The server calls each participant in the group and the call is ready when the first participant answers To make a call select Options gt PTT contacts gt Netw grps channels open the PTT groups tab select a group and press the PTT key ate a Channel group To create a new configured network group or channel select Options gt Create new PTT network group or PTT channel You can create your own public channels choose your own channel name and invite members Those a 4 G wr LiIcalt a members can invite more members to the public channel You may also set up private channels Only users invited by the host are allowed to join and use private channels For each channel define Network group name Nickname and Thumbnail optional When you have successfully created a channel you are asked if you
96. dcast Select Menu gt Messaging and Options gt Cell broadcast With the cell broadcast network service you can receive messages on various topics from your service provider such as weather or traffic conditions in a particular region For available topics and relevant topic numbers contact your service provider Cell broadcast messages cannot be received when the device is in the remote SIM mode A packet data GPRS connection may prevent cell broadcast reception Cell broadcast messages cannot be received in UMTS 3G networks To receive cell broadcast messages you may need to turn cell broadcast reception on Select Options gt Settings gt Reception gt On To view messages related to a topic select the topic To receive messages related to a topic select Options gt Subscribe Tip You can set important topics as hot topics You are notified in the home screen when you receive a message related to a hot topic Select a topic and Options gt Hotmark To add edit or delete topics select Options gt Topic Messaging settings Select Menu gt Messaging and Options gt Settings Open the message type in question and define all fields marked with Must be defined or with a red asterisk Your device may recognise the SIM card provider and configure the correct text message multimedia message and GPRS settings automatically If not contact your service provider for the correct settings order the se
97. e To select whether to use predictive text input select Predictive text To define the settings for predictive text input select Input options Scroll key lights Select Menu gt Control panel gt Settings and General gt Personalisation gt Notification lights To set the scroll key to blink slowly when you do not use the device select Standby br light To set the scroll key to blink rapidly when you have missed calls or received messages select Notification light set the blinking time and select the events you want to be notified of Settings for One touch keys Select Menu gt Control panel gt Settings and General gt Personalisation gt One touch keys Settings 141 Settings 142 To select which application and task is opened when you press a One touch key select the key and Options gt Open To restore the preset applications and tasks select Restore defaults Date and time settings Select Menu gt Control panel gt Settings and General gt Date and time Select from the following e Date and Time Set the current date and time e Timezone Define your time zone e Date format and Date separator Define the date format and separator e Time format and Time separator Select whether to use the 12 hour or 24 hour clock system and with which symbol to separate hours and minutes e Clock type Define the clock type e Clock alarm tone Select the tone for the
98. e online To view the list of service providers select Options gt Settings gt Service providers To check the details of a service select the service from the list To delete the selected service select Options gt Delete Media Edit account settings Select Menu gt Applications gt Media gt Share online To edit your accounts select Options gt Settings gt My accounts and an account To change the user name for the account select User name To change the password for an account select Password To change the account name select Account name To determine the size for images that you post select Upload image size gt Original Medium 1024 x 768 pixels or Small 640 x 480 pixels Edit advanced settings Select Menu gt Applications gt Media gt Share online 105 Media 106 To edit the advanced settings select Options gt Settings gt Advanced To only use a wireless LAN WLAN connection for sharing select Use cellular gt Disabled To also allow a packet data connection select Enabled To allow sharing and downloading items while outside your home network select Allow roaming gt Enabled To download new items from the service automatically select Download interval and the interval for the downloads To download items manually select Manual Data counters Select Menu gt Applications gt Media gt Share online To check the amount of data you have up
99. e required WEP keys When the WEP security mode is in use and your device receives a data packet not encrypted with the WEP keys the data is discarded In an ad hoc network all devices must use the same WEP key Select WLAN security settings and from the following WEP key in use Select the desired WEP key e Authentication type Select Open or Shared WEP key settings Edit the settings for the WEP key WEP key settings In an ad hoc network all devices must use the same WEP key Select WLAN security settings gt WEP key settings and from the following e WEP encryption Select the desired WEP encryption key length WEP key format Select whether you want to enter the WEP key data in ASCII or Hexadecimal format e WEP key Enter the WEP key data 802 1x security settings Select 802 1x as the WLAN security mode 802 1x authenticates and authorises devices to access a Wireless network and prevents access if the authorisation process fails Select WLAN security settings and from the following e WPA WPA2 Select EAP Extensible Authentication Protocol or Pre shared key a secret key used for device identification EAP plug in settings If you selected WPA WPA2 gt EAP select which EAP plug ins defined in your device to use with the access point e Pre shared key If you selected WPA WPA2 gt Pre shared key enter the shared private key that identifies your device to
100. e are recyclable Check how to recycle your Nokia products at www nokia com werecycle or with a mobile device www nokia mobi werecycle Recycle packaging and user guides at your local recycling scheme This user guide helps you get started with your device For more detailed instructions open the in device help in most applications select Options gt Help For further support see www nokia com support For more information on the environmental attributes of your device see www nokia com ecodeclaration C3 warning Use only batteries chargers and accessories approved by Nokia for use with this particular model The use of any other types may invalidate any approval or warranty and may be dangerous In particular use of Unapproved chargers or batteries may present a risk of fire explosion leakage or other hazard For availability of approved accessories please check with your dealer When you disconnect the power cord of any accessory grasp and pull the plug not the cord Accessories 165 Battery Your device is powered by a rechargeable battery The battery intended for use with this device is BL 4U Nokia may make additional battery models available for this device This device is intended for use when supplied with power from the following chargers AC 8 The exact charger model number may vary depending on the type of plug The plug variant is identified by one of the following E EB X AR U A C K or
101. e data transfers for a set monthly fee Listen to internet radio stations Select Menu gt Applications gt Media gt Radio gt Internet radio 115 Media 116 To listen to a radio station on the internet do the following 1 Select a station from your favourites or the station directory or search for stations by name from the Nokia Internet Radio service To add a station manually select Options gt Add station manually You can also browse for station links with the Web browserapplication Compatible links are automatically opened in the Internet Radio application 2 Select Listen The Now playing view opens displaying information about the currently playing station and song To pause the playback press the scroll key to resume press the scroll key again To view station information select Options gt Station information not available if you have saved the station manually If you are listening to a station saved in your favourites scroll left or right to listen to the previous or next saved Station Favourite stations Select Menu gt Applications gt Media gt Radio gt Internet radio To view and listen to your favourite stations select Favourites To add a station manually to favourites select Options gt Add station manually Enter the web address of the station and a name that you want to appear in the favourites list To add the currently playing station to favourites se
102. e device to display a notification when an e mail attachment has been downloaded e Warn before delete Set the device to display a warning before you delete an e mail message e Load HTML images Automatically load HTML images in e mails e Home screen Define how many lines of e mail are displayed in the home screen information area Synchronisation settings Select Menu gt E mail and Settings and a mailbox To define the synchronisation settings for a POP IMAP e mail account select the e mail account What to sync and from the following e Retrieve Retrieve headers only or entire e mails e Emails to retrieve Define how many e mails are retrieved and from which folders e mails are retrieved e IMAP4 folder path Define the folder path for folders to be subscribed e Folder subscriptions Subscribe to other folders in the remote mailbox and retrieve content from those folders Select and e mail account When to sync and from the following e Connection days Define the synchronisation days e Connection hours Define the synchronisation hours e Update interval Define the synchronisation interval e Retrieve when abroad Define whether synchronisation takes place when you are outside of your home network Contact your service provider for information on data transfer costs when roaming To define the synchronisation settings for a Mail for Exchange e mail account select th
103. e e mail account What to sync and from the following e Sync e mail Define whether e mail is synchronised e Remove e m older than Define how long synchronised e mails are visible on your device If you want all your synchronised e mails to be always visible select None Select an e mail account When to sync and from the following e Peak sync days Define the synchronisation days e Peak start time Define the peak synchronisation start time 45 Messaging Messaging 46 e Peak end time Define the peak synchronisation end time e Peak sync schedule Define the peak synchronisation interval e Off peak sync schedule Define the off peak synchronisation interval e Sync while roaming Define whether synchronisation takes place when you are outside of your home network Contact your service provider for information on data transfer costs when roaming The options available for editing may vary The Nokia Messaging service automatically pushes e mail from your existing e mail address to your Nokia E75 You can read respond to and organise your e mails on the go The Nokia Messaging service works with a number of internet e mail providers that are often used for personal e mail such as Google e mail services The Nokia Messaging service may be chargeable For information on possible costs contact your service provider or the Nokia Messaging service The Nokia Messaging service must b
104. e supported by your network and may not be available in all regions Install the Nokia messaging application 1 Select Menu gt Email gt New 2 Read the information on the display and select Start 3 Select Connect to allow your device to access the network 4 Enter your e mail address and password The Nokia Messaging service can run on your device even if you have installed other e mail applications such as Mail for Exchange With Mail for Exchange you can receive your work e mail to your device You can read and reply to your e mails view and edit compatible attachments view calendar information receive and reply to meeting requests schedule meetings and view add and edit contact information ActiveSync Use of the Mail for Exchange is limited to over the air synchronisation of PIM information between the Nokia device and the authorised Microsoft Exchange server Mail for Exchange can be set up only if your company has Microsoft Exchange Server In addition your company s IT administrator must have activated Mail for Exchange for your account Before starting to set up Mail for Exchange ensure that you have the following e A corporate e mail ID e Your office network user name e Your office network password e Your network domain name contact your company s IT department e Your Mail for Exchange server name contact your company s IT department Depending on your company s Mail for Exchange
105. e text Write the standard text message that is sent when you reject a call Own video in recvd call Allow or deny video sending during a video call from your device Image in video call Display a still image if video is not sent during a video call e Automatic redial Set your device to make a maximum of 10 attempts to connect the call after an unsuccessful call attempt To stop automatic redialling press the end key e Show call duration Display the length of a call during the call e Summary after call Display the length of a call after the call e Speed dialling Activate speed dialling e Anykey answer Activate anykey answer e Contact search Activate contact search in the home screen e Line in use This setting network service is displayed only if the SIM card supports two subscriber numbers that is two phone lines Select which phone line you want to use for making calls and sending text messages Calls on both lines can be answered irrespective of the selected line If you select Line 2 and have not subscribed to this network service you are not able to make calls When line 2 is selected 2 is displayed in the home screen e Line change Prevent line selection network service if supported by your SIM card To change this setting you need the PIN2 code Network settings Select Menu gt Control panel gt Settings and Phone gt Network To select the network mode se
106. e text press and hold the shift key and select Paste This method may not work in applications that have their own copy and paste commands Current time Helsinki Wednesday 28 05 2008 no alarms set 4 To select different items such as messages files or contacts scroll to the item you want to select Select Options gt Mark Unmark gt Mark to select one item or Options gt Mark Unmark gt Mark all to select all items Tip To select almost all items first select Options gt Mark Unmark gt Mark all then select the items you do not want and Options gt Mark Unmark gt Unmark To select an object for example an attachment in a document scroll to the object so that square markers appear on each side of the object Volume control To adjust the earpiece volume during a phone call or the volume of the media applications use the volume keys You can personalise your device by for example adjusting the various tones background images and screen Savers i iy a A fa a oP r A s TA Select Menu gt Control panel gt Profiles You can adjust and customise the ringing tones alert tones and other device tones for different events environments or caller groups The active profile is shown at the top of the display in the home screen However if the active profile is General only today s date is shown To create a new profile select Options gt Create new and define the setting
107. e thatis used for web pages Privacy settings e Recently visited pages Enable or disable automatic bookmark collecting If you want to continue saving the addresses of the visited web pages in the Recently visited pages folder but hide the folder from the bookmarks view select Hide folder e Form data saving If you do not want the data you enter in forms on a web page to be saved and used the next time you open the page select Off e Cookies Enable or disable the receiving and sending of cookies Web feed settings e Automatic updates Define whether you want web feeds to be updated automatically and how often you want to update them Setting the application to retrieve web feeds automatically may involve the transmission of large amounts of data through your service provider s network Contact your service provider for information about data transmission charges Acc point for auto update Select the desired access point for updating This option is only available when Automatic updates is activated D ma g aJI E F aw Ek VS WW a Select Menu gt Office gt Intranet To connect to an intranet open the Intranet application and select Options gt Connect If you have several intranet destinations defined in Connection settings select Change destination to select which intranet to browse To define the settings for the intranet connection select Options gt Settings e a i Fr
108. e the name of the shortcut A transfer log is shown after every transfer To view the log of the last transfer select a shortcut in the main view and Options gt View log Handle transfer conflicts If an item to be transferred has been edited in both devices the device attempts to merge the changes automatically If this is not possible there is a transfer conflict Select Check one by one Priority to this phone or Priority to other phone to solve the conflict Your Nokia Eseries device works the same hours as you and at the same speed Keep your e mail contacts and calendar synchronised quickly and conveniently with high speed connections When setting up your e mail you may be prompted for the following information user name e mail type incoming mail server incoming mail server port Quick start guide 17 Quick start guide 18 outgoing mail server outgoing mail server port password or access point With the E mail wizard you can set up business e mail accounts such as Microsoft Exchange or internet e mail accounts such as Google s e mail services The wizard supports POP IMAP and ActiveSync protocols If you are setting up your business e mail contact your company IT department for details before you begin the setup If you are setting up your internet e mail see your e mail service provider s website for details To open the E mail wizard do the following 1 In the home screen select the
109. eceived opml file open the file to save the file into the Received folder in Directories Open the Media 109 Media 110 folder to subscribe to any of the links to add to your podcasts Search podcasts Search helps you find podcasts by keyword or title The search engine uses the podcast search service you set up in Podcasting gt Options gt Settings gt Connection gt Search service URL To search for podcasts select Search and enter the desired keywords Tip Search looks for podcast titles and keywords in descriptions not specific episodes General topics such as football or hip hop usually give better results than a specific team or artist To subscribe to selected channels and add them to your podcasts select Subscribe To start a new search select Options gt New search To see the details of a podcast select Options gt Description Podcasting settings To edit the connection settings select Options gt Settings gt Connection To edit the download settings select Options gt Settings gt Download To restore the default settings open the corresponding settings and select Options gt Restore default Music player 2 Select Menu gt Applications gt Media gt Music player Music player supports files formats such as AAC AAC eAAC MP3 and WMA Music player does not necessarily support all features of a file format or all the variations of file formats You can als
110. eceiving satellite signals select Menu gt Applications gt GPS gt GPS data and Options gt Satellite status If your device has found satellites a bar for each satellite is displayed in the satellite information view The longer the bar the stronger the satellite signal is When your device has received enough data from the satellite signal to calculate the coordinates of your location the bar colour changes Initially your device must receive signals from at least four satellites to be able to calculate the coordinates of your location When the initial calculation has been made it may be possible to continue calculating the coordinates of your location with three satellites However the accuracy is generally better when more satellites are found Signal strengths Chg view Travelling 81 Travelling 82 You may receive a request from a network service to receive your position information Service providers may offer information about local topics such as weather or traffic conditions based on the location of your device When you receive a position request the service that is making the request is displayed Select Accept to allow your position information to be sent or Reject to deny the request With Landmarks you can save the position information of specific locations in your device You can sort the saved locations into different categories such as business and add other information to the
111. ect Options gt Print Connect to printer Connect your device to a compatible printer with a compatible data cable and select Image transfer as the USB connection mode To set your device to ask the purpose of the connection each time the cable is connected select Menu gt Control panel and Connectivity gt USB gt Ask on connection gt Yes Print preview After you select the printer the selected images are displayed using predefined layouts If the images do not fit on a single page scroll up or down to display the additional pages Image print view After you select the images to print and the printer define the printer settings Select from the following e Layout Select the layout for the images e Paper size Select the paper size e Print quality Select the print quality Nokia Office Tools 95 Nokia Office Tools 96 Clock Select Menu gt Applications gt Clock In the Clock application you can view your local time and time zone information set and edit alarms or modify date and time settings Alarm clock Select Menu gt Applications gt Clock To view your active and inactive alarms open the alarms tab To set a new alarm select Options gt New alarm Define the repetition if needed When an alarm is active Z is displayed To turn off the sounding alarm select Stop To stop the alarm for a certain time period select Snooze If your device is switched off when a
112. ection is usually started by the server when the device settings need to be updated To create a new server profile select Options gt Server profiles gt Options gt New server profile You may receive these settings from your service provider in a configuration message If not define the following e Server name Enter a name for the configuration server e Server ID Enter the unique ID to identify the configuration server e Server password Enter a password to identify your device to the server e Access point Select the access point to use for the connection or create a new access point You can also choose to be asked for the access point every time you start a connection This setting is available only if you have selected Internet as the bearer type e Host address Enter the web address of the configuration server e Port Enter the port number of the server e Username and Password Enter your user ID and password for the configuration server Allow configuration Select Yes to allow the server to initiate a configuration session e Auto accept all requests Select Yes if you do not want the server to ask for your confirmation when it initiates a configuration session e Network authentication Select whether to use http authentication e Network user name and Network password Enter your user ID and password for the http authentication This setting is available only if
113. ed attachment or all the attachments from the list to your device select Options gt Download or Download all The attachments are not saved in your device and are deleted when you delete the message To save the selected attachment or all the downloaded attachments in your device select Options gt Save or Save all To open the selected downloaded attachment select Options gt Actions gt Open Messaging 43 Messaging 44 Reply to a meeting request Select Menu gt Messaging and a mailbox Select a received meeting request Options and from the following e Accept Accept the meeting request e Decline Decline the meeting request e Forward Forward the meeting request to another recipient e Remove from calendar Remove a cancelled meeting from your calendar Search for e mail messages Select Menu gt Messaging and a mailbox To search for items within the recipients subjects and body texts of the e mail messages in the mailbox select Options gt Search To stop the search select Options gt Stop search To start a new search select Options gt New search Delete e mails Select Menu gt Messaging and a mailbox To delete an e mail message select the message and Options gt Actions gt Delete The message is placed in the Deleted items folder if available If there is no Deleted items folder available the message is deleted permanently To empty the Deleted items fo
114. eessseessseessssseesssseesss 29 Customise PLOFIIES ccc ctcccestccccstecsesssesssseeeseees 30 Personalise the NOME SCrEEN cc cccccsstcssssseecseeees 30 Change the display theme ccc ssessteeceseeeeee 31 Download a NEMEC eee ceteccccstecsesssscscsssseseseeseeees 31 Change audio tNHEMES eect ccestccecssecesecssteeseees 31 3 D ringing TONES o oo cece eteeccccsseesseetecesscessssseceesees 32 New from Nokia ESCri s ccccccccccsscsccees 33 Key TOQLUN ES icascsaitods cocctsadesiieadiabescadtscunadteevadisSocnded coast 33 FOLGE Sree Masses err eo Stavaveestansseostavestecters 34 One touch KENS nseri TAA 34 calenda eneee teenserrerd startin cacti ieietcieennistees 35 COTTA CUS soe ccssiess ciao Seess destin S 37 MUIEILAS KIN eona EE escuscasistavenoutsasssasotatnst 39 OVI FIE S oot crascrat tas cecce E van ETATE 39 ADOUE OVI SLOE enrian aia 39 MSS ACTING ince cadiescke tee ssoccacsds be ceeeekesstecdceveuss 41 Messaging FOIDELS ccc cceeeeccescsssscssesssscssessssscssesssees 41 Organise MECSSAGES ccccccsssscccesccsssssscsccssessssssesseens 42 EMV el an TE EATA 42 Nokia M SSAGING ccccccsssccccsssssscsccssssscsscssssesesessees 46 Mail Tor EXCnanG ncsiincniciiecAouaiiindMouasne 46 MESSAGE POAC OM orreen EN AAEN 47 SPELEN AR Eee IE REI ean a ey eT RT 47 Text and multimedia MESSAGES ccesscssssseseseseees 48 Special MESSAGE LYPES ccceescccssstecscsseecssesseeessees 51 Cell
115. egrees format using the international WGS 84 coordinate system To use GPS data the GPS receiver of your device must initially receive position information from at least four Satellites to calculate the coordinates of your location When the initial calculation has been made it may be possible to continue calculating the coordinates of your location with three satellites However the accuracy is generally better when more satellites are found a n b a e iJ DVavWVan f gt PF fo im Wa Y af a noOuUTe GUIGANCEe wee JHUS iA Select Menu gt Applications gt GPS gt GPS data and Navigation Start the route guidance outdoors If started indoors the GPS receiver may not receive the necessary information from the satellites Route guidance uses a rotating compass on the device display A red ball shows the direction to the destination and the approximate distance to it is shown inside the compass ring Route guidance is designed to show the straightest route and the shortest distance to the destination measured in a Straight line Any obstacles on the route such as buildings and natural obstacles are ignored Differences in altitude are not taken into account when calculating the distance Route guidance is active only when you move To set your trip destination select Options gt Set destination and a landmark as the destination or enter the latitude and longitude coordinates To clear the destination set for
116. ences and from the following e Use screen name shown only if IM groups are supported by the server To enter a nickname select Yes e Show my availability To allow others to see if you are online select To everyone Allow messages from To allow messages from all select All Allow messages from To allow messages only from your contacts select IM contacts only IM invitations are sent by contacts who want you to join their groups e SortIM contacts Select how your contacts are sorted Alphabetically or By online status e Availability reloading To select how to update information about whether your contacts are online or offline select Automatic or Manual Offline contacts Select whether contacts with an offline status are shown in the contacts list e Own message colour Select the colour of the instant messages you send e Received message colour Select the colour of the instant messages you receive e Show date time info To view the date and time of the instant messages in conversations select Yes e IMalert tone Change the tone that sounds when you receive a new instant message Retrieve IM contact lists You can retrieve contact lists from the server or adda new contact to a contact list When you log in to the server the previously used contact lists are retrieved from the server automatically Record chats When viewing the content of a conversation to reco
117. eneral Select from the following e Personalisation Modify the display settings and personalise the device e Date and time Change the date and time e Enhancement Modify the settings for your accessories e Sensor settings Modify the sensor settings e Security Modify the security settings e Factory settings Restore the original settings of the device Positioning Define the positioning method and server for GPS based applications e Slide handling Modify the slide settings The available options may vary Personalisation settings Select Menu gt Control panel gt Settings and General gt Personalisation Display settings To define the level of light that the device needs before switching on the backlight select Display gt Light sensor To change the text size select Display gt Font size To adjust the length of time the display can be left idle before the screen saver is activated select Display gt Power saver time out To select a welcome note or logo for the display select Display gt Welcome note logo You can either choose the default welcome note enter your own text or select an image To set how quickly the display dims after the last keypress select Display gt Light time out Tone settings Select Menu gt Control panel gt Settings Select General gt Personalisation gt Tones and from the following e Ringing tone Selecta ringing to
118. enter a web address the field opens automatically and select Go to Some web pages may contain material such as graphics and sounds that requires a large amount of memory to view If your device runs out of memory while loading such a web page the graphics on the page are not shown To browse web pages with graphics disabled to save memory and increase the page loading speed select Options gt Settings gt Page gt Loadcontent gt Text only To enter a web address select Options gt Goto gt New web page To refresh the content of the web page select Options gt Web page options gt Reload To save the current web page as a bookmark select Options gt Web page options gt Save as bookmark To view snapshots of the web pages you have visited during the current browsing session select Back available if History list is activated in the browser settings and the current web page is not the first web page you Visit To prevent or allow the automatic opening of multiple windows select Options gt Web page options gt Block pop ups or Allow pop ups To view the shortcut key map select Options gt Keypad shortcuts To edit the shortcut keys select Edit Tip To minimise the browser without exiting the application or connection press the end key once Browser toolbar The browser toolbar helps you select frequently used functions of the browser To open the toolbar press and hold the scroll key
119. eo call starts the camera of the device is activated If the camera is already in use video sending is disabled If the recipient of the call does not want to send video back to you a still image is shown instead To define the still image sent from your device instead of video select Menu gt Control panel gt Settings and Phone gt Call gt Image in video call To disable the sending of audio video or video and audio select Options gt Disable gt Sending audio Sending video or Sending aud amp video To adjust the volume of an active video call use the volume keys To use the loudspeaker select Options gt Activate loudspeaker To mute the loudspeaker and use the earpiece select Options gt Activate handset To swap the places of images select Options gt Swap images To zoom the image on the display select Options gt Zoom and scroll up or down To end the video call and make a new voice call to the same recipient select Options gt Switch to voice call Use video sharing network service to send live video or a video clip from your mobile device to another compatible mobile device during a voice call The loudspeaker is active when you activate video sharing If you do not want to use the loudspeaker for the voice call while you share video you can also use a compatible headset Ed warning Continuous exposure to high volume may damage your hearing Listen to music at a moderate level and do
120. equired to change a blocked PIN code or PIN2 code respectively The length of the code is 8 digits SIP Session Initiation Protocol SIP is used for creating modifying and terminating certain types of communication sessions with one or more participants SSID Service set identifier SSID is the name that identifies the specific WLAN Streaming Streaming audio and video files means playing them directly from the web without downloading them first to your device Universal Mobile Telecommunications System UMTS is a 3G mobile communication system Besides voice and data UMTS enables audio and video delivery to wireless devices When you use your device in GSM and UMTS networks multiple data connections can be active at the same time and access points can share a data connection In the UMTS network data connections remain active during voice calls You can for example browse the web faster than previously possible while simultaneously speaking on the phone UPIN PIN code used in UMTS network UPUK UPIN Unblocking Key UPUK code is required to change a blocked UPIN code or PIN2 code The length of the code is 8 digits USIM SIM card used in UMTS network USSD A service request such as request to command activate an application or configure various settings remotely that you can send to your operator or service provider with your device VoIP Voice over IP technology VoIP is a set of protocols tha
121. ered The result of the calculation remains in the editor field and can be used as the first number of a new calculation The device saves the result of the last calculation in its memory Exiting the Calculator application or switching off the device does not clear the memory To recall the last saved result the next time you open the Calculator application select Options gt Last result To save the numbers or results of a calculation select Options gt Memory gt Save To retrieve the results of a calculation from the memory and use them in a calculation select Options gt Memory gt Recall File manager A Select Menu gt Office gt File mgr About File manager Select Menu gt Office gt File mgr With File manager you can browse manage and open files The available options may vary To map or delete drives or to define settings fora compatible remote drive connected to your device select Options gt Remote drives Find and organise files Select Menu gt Office gt File mgr To find a file select Options gt Find Enter a search term that matches the file name To move and copy files and folders or to create new folders select Options gt Organise i Shortcut To apply actions to multiple items at once mark the items To mark or unmark items press Manage a memory card Select Menu gt Office gt File mgr These options are available only if a compatible memory card is ins
122. erted in the device Select Options and from the following Memory card options Rename or format a memory card e Memory card password Password protect a memory card e Unlock memory card Unlock a memory card Back up files to a memory card Select Menu gt Office gt File mgr To back up files to a memory card select the file types you want to back up and Options gt Back up phone memory Ensure that your memory card has enough free memory for the files that you have chosen to back up Quickoffice lt About Quickoffice Select Menu gt Office gt Quickoffice Quickoffice consists of Quickword for viewing Microsoft Word documents Quicksheet for viewing Microsoft Excel worksheets Quickpoint for Microsoft PowerPoint presentations and Quickmanager for purchasing software You can view Microsoft Office 2000 XP 2003 and 2007 documents DOC XLS and PPT file formats with Quickoffice If you have the editor version of Quickoffice you can also edit files Not all file formats or features are supported Work with files Select Menu gt Office gt Quickoffice Open a file Open the files tab and select the file from the list Sort files Select Options gt Sort by Send files to a compatible device Select Options gt Send and the sending method Converter Select Menu gt Office gt Converter The converter has limited accuracy and rounding errors May Occur C
123. es 142 active notes 91 advanced WLAN 149 applications 153 browser 76 call 144 camera 101 cell broadcast 55 certificate 133 clock 96 contacts 38 date 142 display 140 Download application 78 e mail 54 e mail key 144 EAP plug ins 151 FMradio 115 GPRS 148 internet calls 64 internet radio 117 keypad lock 143 language 141 lights 141 log 72 messages 52 53 network 145 packet data 148 packet data access points 147 podcasting 110 positioning 143 printer 95 RealPlayer 113 restoring 143 sensor 142 service messages 54 SIP 152 Slide 143 synchronisation 45 text messages 52 time 142 tones 141 video centre 108 video sharing 61 voice commands 68 WEP security 150 WLAN 148 149 WLAN internet access points 148 WLAN security 150 settings wizard 24 Share online 103 account settings 105 accounts 103 activating services 103 advanced settings 105 creating posts 104 data counters 106 One click upload 104 Outbox 104 posting 104 service content 105 service provider settings 105 subscribing 103 tags 104 shared video 61 sharing media files online 103 Shortcuts 154 side keys 13 Signal strength 25 SIM access profile 126 SIM card inserting 9 text messages 49 SIP creating profiles 152 editing profiles 152 editing proxy servers 152 editing registration servers 152 settings 152 Slide device 143 SMS short message service 48 software applications 134 software updates 21 speech 47 speed dialling 64 support resources 20
124. es and service message content select Download messages gt Automatically or Manually If you select Automatically you may still need to confirm some downloads since not all services can be downloaded automatically Cell broadcast settings Select Menu gt Messaging and Options gt Settings gt Cell broadcast To receive cell broadcast messages select Reception gt On To select the languages in which you want to receive cell broadcast messages select Language To display new topics in the cell broadcast topics list select Topic detection gt On Other settings Select Menu gt Messaging and Options gt Settings gt Other Select from the following e Save sent messages Select whether to save sent messages in the Sent folder e Number of saved msgs Enter the number of sent messages to save When the limit is reached the oldest message is deleted e Memory in use Select where to save your messages You can save messages to the memory card only if a memory card is inserted Instant messaging Select Menu gt Applications gt IM About Instant messaging Instant messaging IM network service allows you to converse with other people using instant messages and join discussion forums IM groups with specific topics Various service providers maintain compatible IM servers that you can log in to after you register to an IM service Service providers may differ in their support of features
125. ess points that belong to the same network your device can stay connected to the network Tip To check the unique media access control MAC address that identifies your device for example to configure the MAC address of your device to a WLAN router enter 62209526 in the home screen The MAC address is displayed ivity Connect m mas e al C Aah Wi i N ig v 7 Tn p Bat Bal i vay A AI m a oa bl i i W A i 7 Vie i y Cc E FA O Ze GCARZJELGECWY To set your device to show wireless LAN WLAN availability select Menu gt Control panel gt Settings and Connection gt Wireless LAN gt Show WLAN availability If a WLAN is available 88 is displayed wi i mh ol wW ain WW Am CA E Ui Select Menu gt Control panel gt Connectivity gt WLAN wiz The WLAN wizard helps you find and connect to a wireless LAN WLAN When you open the application your device starts to scan for available WLANs and lists them 127 ivity Connect 128 Select Options and from the following e Refresh Update the list of available WLANs Filter WLAN networks Filter out WLANs in the list of found networks The selected networks are filtered out the next time the application searches for WLANs e Start web browsing Start browsing the web using the access point of the WLAN e Cont web browsing Continue web browsing using the currently active WLAN connection e Disconnect W
126. et settings 89 keypad shortcuts 90 map settings 89 navigating 87 navigation settings 89 network positioning 84 route settings 89 routes 85 Saved items 86 Saving locations 86 sending locations 86 settings 88 trafficinformation 88 travel guides 88 updating 90 walking 87 maps browsing 84 Nokia Map Loader 90 measurements converting 93 media radio 114 meeting requests receiving 44 message reader 47 selecting voice 47 messages 41 cell broadcast settings 55 configuration messages 153 other settings 55 service messages 51 text message settings 52 messaging folders 41 42 MiniMap 74 MMS multimedia message service 48 53 modem 79 multimedia messages 48 53 attachments 51 creating presentations 50 receiving 49 replying to 49 multitasking 39 music player playing 110 playlists 111 transferring music 111 playername 118 playing games 119 profile 120 purchasing 118 settings 121 navigation tools 80 net calls barring 66 network settings 145 newsfeeds 74 Nokia Map Loader 90 Nokia support information 20 notes 97 One touch keys 141 one touch keys 13 operator selecting 145 Original settings 143 out of office reply message 44 Ovi 39 Ovi Files 39 OviStore 39 177 Index 178 packet data restricting 153 settings 148 packet data connection access point settings 147 page overview 74 pairing devices 124 passcode 124 PDF reader 94 personalisation changing language 141 display 140
127. ettings for e mail you receive or send select Mailbox settings gt Advanced mailb settings gt Incoming email settings or Outgoing email settings The available options may vary Mailbox settings SelectMenu gt Messaging and Options gt Settings gt E mail To define the mailbox settings select the account Options gt Edit gt User settings and from the following e My name Enter a name that is displayed before your e mail address when you send e mail e Reply to Redirect replies to a different address Select On and enter the e mail address where to direct the replies You can only enter one address e Delete e mails from Delete e mail messages from the device only or from both the device and the server To delete e mails after confirmation select Always ask e Send message Send the e mail immediately or when a connection is available e Send copy to self Save a copy of the e mail to your remote mailbox and to the address defined in Outgoing e mail gt My e mail address e Include signature Attach a signature to your e mail messages e New e mail alerts Set the device to notify you of new received e mail messages with a tone and note Service message settings Select Menu gt Messaging and Options gt Settings gt Service message To allow your device to receive service messages from your service provider select Service messages gt On To select how to download servic
128. f Shera ad ee fa gm a VAY ir Da Yet asi mat ee Oo In France you are only allowed to use WLAN indoors Your device can detect and connect to a wireless local area network WLAN To use WLAN a network must be available in the location and your device must be connected to it wT MAE fa 4 m m ita be a SF F u gm viva AN E OT i ayy a g i BY E S i lal eS N W i LI w AF E EE EWT V Bw EE To use a WLAN you must create an internet access point in a WLAN Use the access point for applications that need to connect to the internet A WLAN connection is established when you create a data connection using a WLAN access point The active WLAN connection is ended when you end the data connection You can also end the connection manually You can use a WLAN during a voice call or when packet data connection is active You can only be connected to one WLAN access point device at a time but several applications can use the same internet access point When the device is in the Offline profile you can still use a WLAN if available Remember to comply with any applicable safety requirements when establishing and using a WLAN connection If you move the device to another location within the WLAN and out of range of a WLAN access point the roaming functionality can automatically connect your device to another access point that belongs to the same WLAN As long as you remain within range of acc
129. f your device the subnet IP address the default gateway and the IP addresses of the primary and secondary DNS servers Contact your internet service provider for these addresses e IPv6 settings Define the type of DNS address Ad hoc channel only for ad hoc networks To enter a channel number 1 11 manually select User defined e Proxy server address Enter the address for the proxy server e Proxy port number Enter the proxy port number Packet data GPRS settings Select Menu gt Control panel gt Settings and Connection gt Packet data Your device supports packet data connections such as GPRS in the GSM network When you are using your device in GSM and UMTS networks itis possible to have multiple data connections active at the same time access points can share a data connection and data connections remain active for example during voice Calls To define the packet data settings select Packet data connection and When available to register the device to the packet data network when you switch the device on in a supported network or When needed to register the device to a packet data network only when an application or action attempts to establish a packet data connection This setting affects all access points for packet data connections To use the device as a packet data modem for your computer select Access point and enter the access point name provided by your service provider To use a h
130. for example from an Unplug or Eject Hardware wizard in Windows to avoid damaging the memory card To use Nokia PC Suite with your device install Nokia PC Suite on your PC connect the data cable and select PC Suite To use your device to connect your PC to the web connect the data cable and select Connect PC to web To synchronise the music in your device with Nokia Music Player install the Nokia Music Player software on your PC connect the data cable and select PC Suite To print images on a compatible printer select Image transfer To change the USB mode you normally use with the data cable select Menu gt Control panel gt Connectivity gt USB and USB connection mode and the desired option To set the device to ask for the mode each time you connect the USB data cable to the device select Menu gt Control panel gt Connectivity gt USB and Ask on connection gt Yes sluetooth Select Menu gt Control panel gt Connectivity gt Bluetooth ra DAOL x VTOLeoLeu Rr YW Vi amp Bluetooth technology in your device enables wireless connections between electronic devices within a range of 10 metres 33 feet A Bluetooth connection can be used to send images videos text business cards calendar notes or to connect wirelessly to devices that use Bluetooth technology Since devices using Bluetooth technology communicate using radio waves your device and the other devices do not need to be in di
131. ft The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft and may be illegal Switch off your device in any area with a potentially explosive atmosphere Obey all posted instructions Sparks in such areas could cause an explosion or fire resulting in bodily injury or death Switch off the device at refuelling points such as near gas pumps at service Stations Observe restrictions in fuel depots storage and distribution areas chemical plants or where blasting operations are in progress Areas with a potentially explosive atmosphere are often but not always Clearly marked They include areas where you would be advised to turn off your vehicle engine below deck on boats chemical transfer or storage facilities and where the air contains chemicals or particles such as grain dust or metal powders You should check with Additional safety information 171 Additional safety information 172 the manufacturers of vehicles using liquefied petroleum gas such as propane or butane to determine if this device can be safely used in their vicinity C9 important This device operates using radio Signals wireless networks landline networks and user programmed functions If your device supports voice calls over the internet internet calls activate both the internet calls and the cellular phone The device may attempt to make emergency calls over both the cellular networks and through your inte
132. fy the origins of software but do not guarantee safety There are four different types of certificates authority certificates personal certificates trusted site certificates and device certificates During a secure connection a server may send a server certificate to your device Upon receipt it is checked through an authority certificate stored in your device You receive notification if the identity of the server is not authentic or if you do not have the correct certificate in your device You can download a certificate from a web site or receive a certificate as a message Certificates should be used when you connect to an online bank or a remote server to transfer confidential information They should also be used if you want to reduce the risk of viruses or other malicious software and to check the authenticity of software when you download and install software to your device Tip When you add a new certificate check its authenticity You can only be sure of the correct identity of a server when the signature and the validity period of a server certificate have been checked To view certificate details open a certificate folder and select a certificate and Options gt Certificate details One of the following notes may appear e Certificate not trusted You have not set any application to use the certificate You may want to change the trust settings e Expired certificate The period of validity has ended
133. ge in the mailbox or move to the beginning of an e mail message Move to the last e mail message in the mailbox or move to the end of an e mail message Change the read or unread status of an e mail message Tentatively accept a meeting request Decline a meeting request Sort e mail messages Shortcuts Expand and collapse the messages Start the synchronisation Start the search Open the agenda view Open the day view Open the week view Open the month view Open the to do view No Add a new meeting 156 Glossary Ad hoc operating mode DTMF tones 3rd generation mobile communications A digital system for mobile communications which aims at global use and provides increased bandwidth 3G lets a mobile device user access a wide variety of services such as multimedia A WLAN network mode where two or more devices connect to each other using WLAN directly without a WLAN access point Cookies are little pieces of information given by the server to you to store information about your visits to a web site When you accept cookies the server is able to evaluate your use of the web site what you are interested in what you want to read and so on Domain name service An internet service that translates domain names such as www nokia com into IP addresses such as 192 100 124 195 Domain names are easier to remember but this translation is needed because the internet is based on
134. gs Use EAP plug ins To use an EAP plug in when you connect to a WLAN using the access point select the desired plug in and Options gt Enable The EAP plug ins enabled for use with this access point have a check mark next to them To not use a plug in select Options gt Disable To edit the EAP plug in settings select Options gt Edit To change the priority of the EAP plug in settings select Options gt Raise priority to attempt to use the plug in before other plug ins when connecting to the network with the access point or Options gt Lower priority to use this plug in for network authentication after attempting to use other plug ins See the device help for more information on EAP plugins 151 Settings Session initiation protocol SIP settings Select Menu gt Control panel gt Settings and Connection gt SIP settings The session initiation protocol SIP is used for creating modifying and terminating certain types of communication sessions with one or more participants network service Typical communication sessions are video sharing and net calls SIP profiles include settings for these sessions The SIP profile used by default for a communication session is underlined To create a SIP profile select Options gt New SIP profile gt Use default profile or Use existing profile To select the SIP profile you want to use by default for communication sessions select Options gt Default profile
135. hange rates you can make currency conversions Zip manager G Select Menu gt Office gt Zip With Zip manager you can create new archive files to store compressed ZIP formatted files add single or multiple compressed files or directories to an archive set clear or change the archive password for protected archives and change settings such as compression level You can save the archive files in the device memory or ona memory card PDF reader amp Select Menu gt Office gt Adobe PDF With PDF reader you can read PDF documents on the display of your device search for text in the documents modify settings such as zoom level and page views and send PDF files using e mail Printing You can print documents such as files messages images or web pages from your device You may not be able to print all types of documents File printing Print files Select Menu gt Control panel gt Printers Before printing ensure that all the necessary configurations have been done to connect your device to the printer Select Options gt Printing options and from the following e Print Print a document To print to a file select Print to file and define the location for the file e Page setup You can change the paper size and orientation define the margins and insert a header or a footer The maximum length of the header and footer is 128 characters e Preview Preview the document before p
136. have the original installation file or a full backup copy of the removed software package To restore the original application remove the application and install the application again from the original installation file or the backup copy The jar file is required for installing Java applications If itis missing the device may ask you to download it If there is no access point defined for the application you are asked to select one When you are downloading the jar file you may need to enter a user name and password to access the server You obtain these from the supplier or manufacturer of the application To install an application or software do the following 1 To locate an installation file select gt Installations gt App mgr Alternatively search installation files using File manager or select Messaging gt Inbox and open a message that contains an installation file 2 In Application manager select Options gt Install In other applications select the installation file to Start the installation During installation the device shows information about the progress of the installation If you install an application without a digital signature or certification the device displays a warning Continue installation only if you are sure of the Origin and contents of the application To start an installed application select the application If the application does not have a default folder defined it is in
137. ic info To view information about traffic events select Options gt Traffic info The events are shown on the map as triangles and lines To view the details of an event including possible rerouting options select Options gt Open To update the traffic information select Update traffic info Travel guides Select Menu gt Applications gt GPS gt Maps Travel guides provide information about attractions restaurants hotels and other points of interest Some guides contain videos and audio clips The guides must be purchased and downloaded before use To purchase and download travel guides or to view downloaded ones select Options gt Extras gt Guides Select a category and a guide and select Yes You can pay for the guides through a credit card or in your phone bill if supported by your service provider Maps settings Select Menu gt Applications gt GPS gt Maps Select Options gt Tools gt Settings and from the following e Internet Define the internet settings such as the default access point to use and whether to be notified when roaming e Navigation Define the navigation settings such as voice guidance settings and traffic information updates e Route Define the routing settings such as the mode of transportation and the method for calculating the route e Map Define the map settings such as the map colours and the measurement system used Internet settings Select
138. ick start guide Insert the SIM card Ensure the contact area on the card is facing the connectors on the device and that the bevelled corner is facing the top of the device Align the contacts of the battery with the corresponding connectors on the battery compartment and insert the battery in the direction of the arrow Quick start guide 10 Your battery has been partially charged at the factory If the device indicates a low charge do the following 1 Connect the charger to a wall outlet 2 Connect the charger to the device 3 When the device indicates a full charge disconnect the charger from the device then from the wall outlet You do not need to charge the battery for a specific length of time and you can use the device while it is charging If the battery is completely discharged it may take several minutes before the charging indicator appears on the display or before any calls can be made Tip If you have old compatible Nokia chargers you can use them with the Nokia E75 by attaching the CA 44 charger adapter to the old charger The adapter is available as a separate enhancement USB charging You can use USB charging when a wall outlet is not available When charging your device with the USB cable the charging time is longer With USB charging you can also transfer data with USB cable while charging the device 1 Connect a compatible USB device to your device using a compatible USB ca
139. igh speed data connection select High speed packet access gt Enabled WLAN settings SelectMenu gt Control panel gt Settings and Connection gt Wireless LAN To have an indicator displayed when there is a wireless LAN WLAN available in your current location select Show WLAN availability gt Yes To select the interval for your device to scan for available WLANs and to update the indicator select Scan for networks This setting is not available unless you select Show WLAN availability gt Yes To set the device to test the internet capability of the selected WLAN automatically to ask for permission every time or to never perform the connectivity test select Internet connectivity test gt Run automatically Ask every time or Never run If you select Run automatically or allow the test to be performed when the device asks for it and the connectivity test is performed successfully the access point is saved to internet destinations To check the unique media access control MAC address that identifies your device enter 62209526 in the home screen The MAC address is displayed Advanced WLAN settings Select Options gt Advanced settings The advanced WLAN settings are normally defined automatically and changing them is not recommended To edit the settings manually select Automatic configuration gt Disabled and define the following e Long retry limit Enter the maximum number of transmission at
140. igh speed downlink packet access HSDPA brings high speed data delivery to 3G terminals ensuring that users requiring effective multimedia capabilities benefit from data rates previously unavailable because of limitations in the radio access network Hypertext transfer protocol A document transfer protocol used in the web HTTPS HTTP over a secure connection IMAP4 Internet mail access protocol version 4 A protocol used for accessing your remote mailbox An access point is where your device access point connects to a network To use e mail and multimedia services or to connect to the internet and browse web pages you must first define internet access points for these services Infrastructur A WLAN network mode where devices e operating are connected to WLAN using a WLAN mode access point Personal identity number The PIN code protects your device from unauthorised use The PIN code is supplied with the SIM card If the PIN code request is selected the code is required each time the device is switched on The PIN code must be 4 to 8 digits long PIN2 The PIN2 code is supplied with some SIM cards The PIN2 code is required to access certain functions supported by the SIM card The length of the PIN2 code is 4 to 8 digits POP3 Post office protocol version 3 A common mail protocol that can be used for accessing your remote mailbox PUK and Personal Unblocking Key PUK and PUK2 PUK2 codes are r
141. ilbox configured to your device e Memo entries are related to the whole day but not to a specific time of the day e Anniversary entries remind you of birthdays and special dates They refer to a certain day but nota specific time of the day Anniversary entries are repeated every year e To do entries remind you of a task that has a due date but not a specific time of the day To create a calendar entry select a date Options gt New entry and the entry type To set the priority for meeting entries select Options gt Priority To define how the entry is handled during synchronisation select Private to hide the entry from viewers if the calendar is available online Public to make the entry visible to viewers or None to not copy the entry to your computer To send the entry to a compatible device select Options gt Send To make a meeting request of a meeting entry select Options gt Add participants Create meeting requests Select Menu gt Calendar Before you can create meeting requests you must have a compatible mailbox configured for your device To create a meeting entry 1 To create a meeting entry select a day and Options gt Newentry gt Meeting request 2 Enter the names of the required participants To add names from your contacts list enter the first few characters and select from the proposed matches To add optional participants select Options gt Add participants 3 Enter the
142. iles to Normal or Low for improved playback To organise your flash files select Options gt Organise The FM radio depends on an antenna other than the wireless device antenna A compatible headset or accessory needs to be attached to the device for the FM radio to function properly Select Menu gt Applications gt Media gt Radio gt FM radio The quality of the radio broadcast depends on the coverage of the radio station in that particular area Select Menu gt Applications gt Media gt Radio gt FM radio The quality of the radio broadcast depends on the coverage of the radio station in that particular area You can make a call or answer an incoming call while listening to the radio The radio is muted when there is an active call To start a station search select or If you have saved radio stations in your device to go to the next or previous saved station select gt gt or Select Options and from the following Activate loudspeaker Listen to the radio using the loudspeaker e Manual tuning Change the frequency manually e Station directory View available stations based on location network service e Save station Save the station to which you are currently tuned to your station list e Stations Open the list of your saved stations e Playin background Return to the home screen while listening to the FM radio in the background Saved stations Select Menu
143. ing network service you can send and receive text messages multimedia messages audio messages and e mail messages You can also receive web service messages cell broadcast messages and special messages containing data and send service commands Before sending or receiving messages you may need to do the following e Insert a valid SIM card in the device and be located in the service area of a cellular network e Verify that the network supports the messaging features you want to use and that they are activated on your SIM card e Define the internet access point settings on the device Define the e mail account settings on the device e Define the text message settings on the device e Define the multimedia message settings on the device The device may recognise the SIM card provider and automatically configure some of the message settings If not you may need to define the settings manually or contact your service provider to configure the settings Messaging Select Menu gt Messaging Messages and data received using Bluetooth connectivity are stored in the Inbox folder E mail messages are stored in the Mailbox folder Messages that you have been writing can be stored in the Drafts folder Messages that are waiting to be sent are stored in the Outbox folder and messages that have been sent excluding Bluetooth messages are stored in the Sent folder Tip Messages are placed in the Outbox folder
144. ing tone for a selected contact group only select Options gt Personalise gt Alert for and select the desired group Phone calls coming from outside that group have a silent alert To change the message tone select Options gt Personalise gt Message alert tone Personalisation 29 Personalisation 30 Customise profiles Select Menu gt Control panel gt Profiles Scroll to a profile and select Options gt Personalise and from the following e Ringing tone Selecta ringing tone from the list or select Download sounds to open a bookmark folder containing a list of bookmarks for downloading tones using the browser If you have two alternate phone lines in use you can specify a ringing tone for each line e Video call tone Select a ringing tone for video Calls e Say caller s name When you select this option and someone from your contacts list calls you the device sounds a ringing tone that is a combination of the spoken name of the contact and the selected ringing tone e Ringing type Select how you want the ringing tone to alert you e Ringing volume Set the volume level of the ringing tone e Message alert tone Select a tone for received text messages e E mail alert tone Select a tone for received e mail messages e Vibrating alert Set the device to vibrate when you receive a Call e Keypad tones Set the volume level of the keypad tones e Warning tones Activ
145. ings 150 settings 149 WEP keys 150 WPA security settings 151 WLAN wizard 127 world clock 96 WPA security settings 151 Zip manager 94
146. ions gt Settings gt Multimedia message Select from the following Image size Scale images in multimedia messages MMS creation mode Select Restricted to set your device to prevent you from including content in multimedia messages that may not be supported by the network or the receiving device To receive warnings about including such content select Guided To create a multimedia message with no restrictions on attachment type select Free If you select Restricted creating multimedia presentations is not possible Access point in use Select the default access point to connect to the multimedia message centre You may not be able to change the default access point if it is preset in your device by your service provider e Multimedia retrieval Select how you want to receive messages if available Select Always automatic to receive multimedia messages always automatically Auto in home netw to receive notification of a new multimedia message that you can retrieve from the message centre for example when you are travelling abroad and are outside your home network Manual to retrieve multimedia messages from the message centre manually or Off to prevent receipt of any multimedia messages Automatic retrieval may not be supported in all regions Allow anonymous msgs Receive messages from unknown senders e Receive adverts Receive messages defined as advertisements e Receive reports Reques
147. ions you are not using Press and hold the home key Scroll to the application and press the backspace key to close the application Q I tried to create an e mail account with the E mail wizard but it failed What should I do A You may be able to create an e mail account manually Remove the incomplete e mail account Switch to the Offline profile Select Menu gt E mailand Settings the e mail account in question and Options gt Remove mailbox In the Offline profile select the E mail wizard Whenever Select connection is displayed select Cancel Enter your e mail address and password when prompted Select Menu gt E mail and Settings Select the new mailbox and Mailbox settings and enter the necessary settings manually To save your settings select Back Troubleshooting 163 Green tips 164 Here are tips on how you can contribute to protecting the environment e Er When you have fully charged the battery and disconnected the charger from the device unplug the charger from the wall outlet You do not need to charge your battery so often if you do the following e Close and disable applications services and connections when not in use e Decrease the brightness of the screen Set the device to enter the power saver mode after the minimum period of inactivity if available in your device e Disable unnecessary sounds such as keypad and ringing tones Most of the materials in a Nokia phon
148. isabled all EAP types that are not needed and all the EAP type settings are correct passwords user names certificates Q Why can t I select a contact for my message A The contact card does not have a phone number an address or an e mail address Select Menu gt Contacts and edit the contact card Q The note Retrieving message is shown briefly What is happening A The device is trying to retrieve a multimedia message from the multimedia messaging centre This note is shown if you have selected Menu gt Messaging and Options gt Settings gt Multimedia message gt Multimedia retrieval gt Always automatic Check that the settings for multimedia messaging are defined correctly and that there are no mistakes in phone numbers or addresses Q How can I end the data connection when the device starts a data connection again and again A The device may be trying to retrieve a multimedia message from the multimedia message centre To stop the device from making a data connection select Menu gt Messaging and Options gt Settings gt Multimedia message gt Multimedia retrieval gt Manual to have the multimedia messaging centre save messages to be retrieved later or Off to ignore all incoming multimedia messages If you select Manual you receive a notification when there is a new multimedia message that you can retrieve in the multimedia message centre If you select Off the device does not make any network co
149. it and continue later Content is transferred from the memory of the other device to the corresponding location in your device The transfer time depends on the amount of data to be transferred Select Menu gt Control panel gt Switch After the first transfer select from the following to start a new transfer depending on the model i to synchronise content between your device and the other device if the other device supports synchronisation The synchronisation is two way If an item is deleted in one device it is deleted in both You cannot restore deleted items with synchronisation J to retrieve content from the other device to your device With retrieval content is transferred from the other device to your device You may be asked to keep or delete the original content in the other device depending on the device model 4 to send content from your device to your other device If you cannot send an item depending on the type of the other device you can add the item to the Nokia folder to C Nokia or E Nokia in your device When you select the folder to transfer the items are synchronised in the corresponding folder in the other device and vice versa Use shortcuts to repeat a transfer After a data transfer you can save a shortcut with the transfer settings to the main view to repeat the same transfer later To edit the shortcut select Options gt Shortcut settings For example you can create or chang
150. k acicaveceuececccencnes 140 General setini Sse AA EAA 140 Telephone SETLINGS ec ccesteccccsstccescsssecssssseeeees 144 CONNECTION SETTINGS ccc cececccccssssstccesessssssseeeeens 145 Application SettiNGS ccc ccsseccccssscessstecssssseeees 153 Shortcuts oinei eenaa ansaan oaa 154 General sShOrtCUtS issih tealiateiccticssalicnalacstindevadertebeaces 154 GLOSS ANY naa eaa aa aee a 157 Troubleshooting sseoesssesosesossoss00 161 Green DS wicceccesvsascswsscnscaessecsdsossceescesteeebens 164 SIVE CNEL soc sscssvacesseseasboecsssdesasavesdssssvieastesseescassensesenss 164 PREG Cle ate cue narss ct seiantieis panes cere nase rhesdeaigoenatseus cise 164 Save Da DG a orses E REA ENEE 164 Ledin MO E rnenonnnana 164 ACCOSSOTIO S srscsrsessiredarisi r eeriri terai ais 165 Battel oiei oaa OEE 166 Battery and charger informatiOn ccccseseees 166 Nokia battery authentication guidelines 167 Taking Care Of your device 168 ROC ClO EREE EEE A E 168 Additional safety information 170 Smalkchildre neenon eana smdteesieadsats 170 Operating ENVIFONMENL ccc ccccecteccccsstteeeeeees 170 Medical devi CES naa a AA 170 Vences nana 171 Potentially explosive environments 0000000000000 171 Emergency calia an aa 172 Certification information SAR s00000000000000000000 172 NINO ED AE A A A E 174 Read these simple guidelines
151. kia PC Suite you need a PC that runs Microsoft Windows XP SP1 or SP2 or Windows Vista and is compatible with a USB data cable or with Bluetooth connectivity Nokia PC Suite does not work with Macintosh For further information on Nokia PC Suite see its help When browsing web pages with the Web browser function or the Nokia website application or maps in the Maps application press to To install Nokia PC Suite zoom in and to zoom out 1 Ensure the memory card is inserted in your Nokia E75 2 Connect the USB cable Your PC recognises the new device and installs the necessary drivers This can take several minutes to complete 3 Select Mass storage as the USB connection mode in your device Your device is displayed in Windows file browser as a Removable Disk 4 Open the root of the memory card drive with the Windows file browser and select the PC Suite installation 5 The installation is started Follow the displayed instructions s Tip To update your Nokia PC Suite or if you have problems when installing Nokia PC Suite from the memory card copy the installation file to your PC and start the installation from your PC To switch profiles press the power key briefly To switch to the Silent profile press and hold To search for items in your device or on the internet network service select Menu gt Applications gt Search Quick start guide Find help 20 When you want to learn more about ho
152. l gt App mgr Select Options gt Settings and from the following e Software installation Select whether Symbian software that has no verified digital signature can be installed e Online certificate check Check the online certificates before installing an application Security and data management 135 Security and data management 136 e Default web address Set the default address used when checking online certificates Some Java applications may require that a message be sent or a network connection be made to a specific access point to download extra data or components Select Menu gt Control panel gt Phone gt App update With Application Update you can check the available updates for applications and download them to your device After updating your device software using Application Update the functional instructions related to the updated applications in the user guide or the helps may not be up to date To download the available updates select Options gt Start update To unmark updates select the updates To view information on an update select Options gt View details To change the settings select Options gt Settings 4 D 4 PEL P wpa ga gt gn A E E 1A 1 i f ine J lal t t Select Menu gt Control panel gt Phone gt Licences Some media files such as images music or video clips are protected by digital usage rights The licenses for such fi
153. lder select the folder and Options gt Empty deleted items Switch between e mail folders Select Menu gt Messaging and a mailbox To open another e mail folder or mailbox select Inbox at the top of the display Select the e mail folder or mailbox from the list Disconnect from the mailbox Select Menu gt Messaging and a mailbox To cancel the synchronisation between the device and the e mail server and to work with e mail without a wireless connection select Options gt Disconnect If your mailbox does not have the Disconnect option select Options gt Exit to disconnect from the mailbox To start the synchronisation again select Options gt Connect Set an out of office reply Select Menu gt E mail To set an out of office reply if available select your mailbox andOptions gt Settings gt Mailbox gt Out of office gt On or Options gt Settings gt Mailbox settings gt Out of office gt On To enter the text for the reply select Out of office reply General e mail settings Select Menu gt E mail and Settings gt Global settings Select from the following e Message list layout Select whether the e mail messages in Inbox display one or two lines of text e Body text preview Preview messages when scrolling through the list of e mail messages in Inbox e Title dividers To be able to expand and collapse the list of e mail messages select On e Download notifications Set th
154. lect GAccess point The device asks to check for available connections After the search connections that are already available are displayed and can be shared by a new access point If you skip this step you are asked to select a connection method and to define the settings needed To edit the settings of an access point select one of the access point groups scroll to an access point and select Edit Use the instructions provided by your service provider to edit the following e Connection name Enter a name for the connection e Data bearer Select the data connection type Depending on the data connection you select only certain setting fields are available Fill in all fields marked with Must be defined or with a red Other fields can be left empty unless your service provider has instructed otherwise To use a data connection your service provider must support this feature and if necessary activate it for your SIM card Create access point groups Press F and select Tools gt Settings gt Connection gt Destinations Some applications allow you to use access point groups to connect to a network To avoid selecting which access point to use every time the device attempts to connect to a network you can create a group that contains various access points and define the order in which the access points are used to connect to a network For example you can add wireless LAN WLAN and packet data access
155. lect Network mode and Dual mode UMTS or GSM In dual mode the device switches automatically between networks Tip Selecting UMTS enables faster data transfer but may increase the demand on battery power and reduce the battery life In regions close to both GSM and UMTS networks selecting Dual mode may cause constant jumping between the two networks which also increases the demand on battery power To select the operator select Operator selection and Manual to select from available networks or Automatic to set the device to select the network automatically To set the device to indicate when it is used ina microcellular network MCN select Cell info display gt On Connection settings Select Menu gt Control panel gt Settings and Connection Select from the following e Bluetooth Edit the Bluetooth settings USB Edit the data cable settings e Destinations Set up new or edit existing access points Some or all access points may be preset for your device by your service provider and you may not be able to create edit or remove them e VPN Manage the settings for virtual private networking e Packet data Define when packet data network is attached and enter the default packet switched access point name if you use your device as a modem for a computer Settings 145 Settings 146 e Wireless LAN Set the device to display an indicator when a wireless LAN WLAN is available
156. lect Options gt Add to Favourites To view station information to move a station up or down in the list or to delete a station from favourites select Options gt Station and the desired option To view only stations beginning with particular letters or numbers start entering the characters Matching Stations are displayed Search for stations Select Menu gt Applications gt Media gt Radio gt Internet radio To search for radio stations in the Nokia Internet Radio service by name do the following 1 Select Search 2 Enter a station name or the first letters of the name in the search field and select Search Matching stations are displayed To listen to a station select the station and Listen To save a Station to your favourites select the station and Options gt Add to Favourites To make another search select Options gt Search again Station directory Select Menu gt Applications gt Media gt Radio gt Internet radio and Station directory The station directory is maintained by Nokia If you want to listen to internet radio stations outside the directory add station information manually or browse for station links on the internet with the Web browser application Select from the following e Browse by genre View the available radio Station genres e Browse by language View the languages in which there are stations broadcasting e Browse by country region View the count
157. lect a tone that sounds when you open or close the slide select Tones gt Opening sound or Closing sound E mail key settings Select Menu gt Control panel gt Settings and General To select which mailbox to open with the e mail key select E mail key settings gt E mail key and press the scroll key Telephone settings Select Menu gt Control panel gt Settings and Phone Select from the following e Call Define general call settings e Call divert Define your call divert settings See Call divert p 65 Call barring Define your call barring settings See Call barring p 65 Network Adjust the network settings Call settings Select Menu gt Control panel gt Settings and Phone gt Call Select from the following Send my caller ID Display your phone number to the person you are calling Send my internet call ID Display your internet call address to the person you are calling using an internet call Call waiting Set the device to notify you of incoming calls while you are in a call network service Internet call waiting Set the device to notify you of new incoming internet calls while you are in a Call Internet call alert To set the device to notify you of incoming internet calls select On If you select Off you receive only a notification if you missed a call Reject call with message Reject a call and send a text message to the caller Messag
158. les may allow or restrict their usage For example with some licenses you may listen to a song only a limited number of times During one playback session you may rewind fast forward or pause the song but once you stop it you have used one of the instances allowed Digital rights management DRM protected content comes with an associated activation key that defines your rights to use the content If your device has OMA DRM protected content to back up both the activation keys and the content use the backup feature of Nokia PC Suite If your device has WMDRM protected content both the activation keys and the content will be lost if the device memory is formatted You may also lose the activation keys and the content if the files on your device get corrupted Losing the activation keys or the content may limit your ability to use the same content on your device again For more information contact your service provider Some activation keys may be connected to a specific SIM card and the protected content can be accessed only if the SIM card is inserted in the device To view your licenses by type select Valid licences Invalid licences or Not in use To view the key details select Options gt Licence details The following details are displayed for each media file e Status The status is Licence is valid Licence expired or Licence not yet valid e Content sending Allowed means that you can send the file to
159. lication press the home key for a few seconds or press the scroll key To close the selected application press the backspace key Leaving applications running in the background increases the demand on battery power and reduces the battery life To open the Calendar application press the calendar key briefly To create a new meeting entry press the calendar key for a few seconds To open your default mailbox press the e mail key briefly To create a new e mail message press the e mail key for a few seconds Select Menu gt Calendar Select Menu gt Calendar With calendar you can create and view scheduled events and appointments and switch between different calendar views In the month view calendar entries are marked with a triangle Anniversary entries are also marked with an exclamation mark The entries of the selected day are displayed as a list To open calendar entries select a calendar view and an entry Whenever you see the icon scroll right to access a list of available actions To close the list scroll left New from Nokia Eseries 35 New from Nokia Eseries 36 Create calendar entries Select Menu gt Calendar You can create the following types of calendar entries e Meeting entries remind you of events that have a specific date and time e Meeting requests are invitations that you can send to the participants Before you can create meeting requests you must have a compatible ma
160. ll IeecuUdsSs d q DEG pal Select Menu gt Web Web feeds are XML files on web pages that are used to Share for example the latest news headlines or blogs It is common to find web feeds on web blog and wiki pages The browser application automatically detects if a web page contains web feeds If web feeds are available to subscribe to a web feed select Options gt Subscribe to web feeds To update a web feed in the Web feeds view select a feed and Options gt Web feed options gt Refresh To define whether the web feeds are updated automatically in the Web feeds view select Options gt Edit gt Edit This option is not available if one or more feeds are marked Your device supports widgets Widgets are small downloadable web applications that deliver multimedia news feeds and other information such as weather reports to your device Installed widgets appear as Separate applications in the Applications folder You can download widgets using the Download application or from the web You can also install widgets on a compatible memory card if available The default access point for widgets is the same as in the web browser When active in the background some widgets may update information automatically to your device Using widgets may involve the transmission of large amounts of data through your service provider s network For information about data transmission charges contact your service p
161. ll key and select Search gt Addresses gt Options gt Select from Contacts If you search for locations without an internet connection the search results are limited to a radius of 50 km 31 miles Search by categories The search results are grouped by categories To limit the search to one category select Options gt Search gt Places and the category pP Example To find restaurants close to your location select Options gt Search gt Places gt Eat amp Drink gt Restaurants Example To find a specific hotel select Options gt Search gt Places gt Accommodation Enter the name of the hotelin the search field and select Search all Select Menu gt Applications gt GPS gt Maps To plan a route select your start point on the map or search for a location press the scroll key and select Add gt Add to route To define the destination and add more locations for your route search for the location and select Options gt Add route point Travelling 85 Travelling 86 To change the order of the locations in the route select a location press the scroll key and select Move Scroll to the place where you want to move the location and select Select To edit the route press the scroll key and select Edit route To define the settings for the route select Options gt Settings To show the route on the map select Options gt Show route To navigate to the destination by car or on
162. load languages Tip When you download a new language you must download at least one voice for that language To set the speaking voice select Voice The voice depends on the selected language To set the speaking rate select Speed To set the speaking volume select Volume To view details of a voice open the voice tab and select the voice and Options gt Voice details To listen toa voice select the voice and Options gt Play voice To delete languages or voices select the item and Options gt Delete Message reader settings To change the message reader settings open the Settings tab and define the following e Language detection Activate automatic reading language detection Messaging 47 Messaging 48 e Continuous reading Activate continuous reading of all selected messages e Speech prompts Set the message reader to insert prompts in messages e Audio source Listen to messages through the earpiece or loudspeaker Select Menu gt Messaging Only devices that have compatible features can receive and display multimedia messages The appearance of amessage may vary depending on the receiving device A multimedia message MMS can contain text and objects such as images sound clips or video clips Before you can send or receive multimedia messages on your device you must define the multimedia message settings Your device may recognise the SIM card provider and configure the c
163. loaded and downloaded select Options gt Settings gt Data transferred To reset the counters select Options gt Clear sent Clear received or Clear all With Nokia Video Centre network service you can download and stream video clips over the air from compatible internet video services using a packet data or wireless LAN WLAN connection You can also transfer video clips from a compatible PC to your device and view them in Video centre Using packet data access points to download videos may involve the transmission of large amounts of data through your service provider s network Contact your service provider for information about data transmission charges Your device may have predefined services Service providers may provide free content or charge a fee Check the pricing in the service or from the service provider View and download video clips Connect to video services 1 Select Menu gt Applications gt Media gt Video centre 2 To connect to a Service to install video services select Add new services and the desired video service from the service catalogue View a video clip To browse the content of installed video services select Video feeds The content of some video services is divided into categories To browse video clips select a category To search for a video clip in the service select Video search Search may not be available in all services Some video clips can be streamed over
164. ly to your device select Set as authorised Connections between your device and the other device can be made without your knowledge No separate acceptance or authorisation is needed Use this status only for your own devices such as your compatible headset or computer or devices that belong to someone you trust If you want to accept connection requests from the other device separately every time select Set as unauthorised To use a Bluetooth audio accessory such as a Bluetooth handsfree or headset you need to pair your device with the accessory For the passcode and further instructions see the accessory user guide To connect to the audio accessory switch on the accessory Some audio accessories connect automatically to your device Otherwise open the paired devices tab select the accessory and Options gt Connect to audio device Select Menu gt Control panel gt Connectivity gt Bluetooth 1 To block a device from establishing a Bluetooth connection to your device open the paired devices tab 2 Select a device you want to block and Options gt Block To allow the pairing of a device again after it was blocked delete it from the blocked devices list Open the blocked devices tab and select Options gt Delete If you reject a pairing request from another device you are asked if you want to block all future connection requests from this device If you accept the query the remote device is added to the li
165. m such as addresses You can use your saved landmarks in compatible applications such as GPS data Select Menu gt Applications gt GPS gt Landmarks The coordinates in the GPS are expressed using the international WGS 84 coordinate system Select Options and from the following e New landmark Create a new landmark To make a positioning request for your current location select Current position To select the location from the map select Select from map To enter the position information manually select Enter manually e Edit Edit or add information to a saved landmark for example a street address e Add to category Adda landmark to a category in Landmarks Select each category to which you want to add the landmark e Send Send one or several landmarks to a compatible device Your received landmarks are placed in the Inbox folder in Messaging You can sort your landmarks into preset categories and create new categories To edit and create new landmark categories open the categories tab and select Options gt Edit categories Select Menu gt Applications gt GPS gt GPS data GPS data is designed to provide route guidance information to a selected destination position information about your current location and travelling information such as the approximate distance to the destination and the approximate duration of travel The coordinates in the GPS are expressed in degrees and decimal d
166. m the following e Listen Listen to the selected word e History Find previously translated words from the current session e Languages Change the source or target language download languages from the internet or remove a language from the dictionary You cannot remove the English language from the dictionary You can have two additional languages installed besides English e Speech Edit the voice feature settings You can adjust the speed and volume of the voice a Se a ae y gm d U Ct a Select Menu gt Applications gt Notes You can create and send notes to other compatible devices and save received plain text files TXT file format to Notes To write a note start entering the text The note editor opens automatically To open a note select Open To send a note to other compatible devices select Options gt Send To synchronise or to define synchronisation settings for a note select Options gt Synchronisation Select Nokia Office Tools 97 Nokia Office Tools 98 Start to initialise synchronisation or Settings to define the synchronisation settings for the note Your device contains a variety of media applications for both business and leisure time use Select Menu gt Applications gt Media gt Camera Capture an image Select Menu gt Applications gt Media gt Camera or press the capture key to activate the camera Your device supports an image capture resolution
167. mages and liabilities such limitations shall likewise limit any representations warranties damages and liabilities of Nokia s licensors The availability of particular products and applications and services for these products may vary by region Please check with your Nokia dealer for details and availability of language options This device may contain commodities technology or software subject to export laws and regulations from the US and other countries Diversion contrary to law is prohibited FCC INDUSTRY CANADA NOTICE Your device may cause TV or radio interference for example when using a telephone in close proximity to receiving equipment The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated If you require assistance contact your local service facility This device complies with part 15 of the FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Any changes or modifications not expressly approved by Nokia could void the user s authority to operate this equipment Issue 3 EN Contents SAI OEY AEI EAE EEE E E 7 ADOUE your devil soera a a eraann T Office applications 00000eeeeeeseeeseeessseessssessseessseeessseees 8 Network Servit S scccecssecasivaceeseunsaasceansenadenacensscentameren
168. mber or e mail address To add a semicolon that separates the recipients press You can also copy and paste the number or address from the clipboard 3 In the subject field enter the subject of the e mail To change the fields that are visible select Options gt Message header fields 4 Inthe message field write the message To insert a template or note select Options gt Insert content gt Insert text gt Template or Note 5 Toadda media file to a multimedia message select Options gt Insert content the file type or source and the desired file To insert a business card slide note or some other file to the message select Options gt Insert content gt Insert other 6 To capture an image or record a video or sound clip fora multimedia message select Options gt Insert content gt Insertimage gt New Insert video clip gt New or Insert sound clip gt New 7 To add an attachment to an e mail select Options and the attachment type E mail attachments are indicated by J 8 To send the message select Options gt Send or press the call key O The message sent icon or text on your device screen does not indicate that the message is received at the intended destination Your device supports text messages beyond the limit for a single message Longer messages are sent as two or more messages Your service provider may charge accordingly Characters with accents other marks or some language o
169. me or SIP address If your device is not set to silent it rings when you receive an invitation If someone sends you a Share invitation and you are not within UMTS network coverage you will not Know that you received an invitation When you receive an invitation select from the following e Yes Accept the invitation and activate the sharing session e No Reject the invitation The sender receives a message that you rejected the invitation You can also press the end key to reject the invitation and end the voice call To mute the video on your device select Options gt Mute To play the video at the original volume select Options gt Original volume This does not affect the audio playback of the other party of the phone call To end the sharing session select Stop To end the voice call press the end key When you end the call also video sharing ends With the internet call service network service you can make and receive calls over the internet Internet calls can be established between computers between mobile phones and between a VoIP device anda traditional telephone To be able to use the service you must subscribe to the service and have a user account To make or receive an internet call you must be in the service area of a wireless LAN and connected to an internet call service Select Menu gt Contacts Scroll left and select the internet calls service from the list Phone 63
170. me used in the main menu e Homes Change the theme used in the home screen e Wallpaper Change the background image of the home screen e Power saver Select an animation for the screen saver e Call image Change the image displayed during Calls To activate or deactivate the theme effects select General gt Options gt Theme effects Download a theme Select Menu gt Control panel gt Themes To download a theme select General gt Download themes gt Options gt Goto web address Enter the web address from which you want to download your theme Once the theme is downloaded you can preview or activate the theme To preview a theme select Options gt Preview To activate a theme select Options gt Set Change audio themes You can set sounds for various device events The sounds can be tones speech or a combination of both Select Menu gt Control panel gt Themes and Audio themes To change the current audio theme select Active audio theme To add 3 D effects to the audio theme select Options gt 3 D ringing tones To create a new audio theme select Options gt Save theme To set a sound for an event select an event group such as Messaging events Select the desired event and from the following e Silent Deactivate the sound of the device event e Tone Seta tone asthe sound for the device event e Speech Set a synthesised voice tag as the sound for the de
171. must receive signals from at least four satellites to calculate your location After the initial calculation signals from three satellites may be enough The data transfer indicator A RW TH shows the internet connection used and the amount of data transferred since the application started z n n ge 7 ie a L ra Ca Trihnrnnc rind l ocations Select Menu gt Applications gt GPS gt Maps To find a location in the city or area displayed on the map enter the full or partial address of the location in the search field and press the scroll key To find a location in another city enter the city and the full or partial address such as London Oxford Street and press the scroll key For the best results enter the name of the city in the local language Tip If unsure of the name of the location enter only the first characters of the search word For the best search results enter at least three characters To find a specific address or an address in another country press the scroll key and select Search gt Addresses Country Region and City Post code are mandatory Tip To search for locations in another country using the search field enter also the name of the country in the search field Rome Italy Enter the name of the country in English or use the three letter ISO code ITA for Italy GBR for Great Britain CHN for China To import a location address from the Contacts application press the scro
172. n the default or previously used sync profile is displayed To modify the profile scroll to a sync item and select Mark to include it in the profile or Unmark to leave it out To manage sync profiles select Options and the desired option To synchronise data select Options gt Synchronise To cancel synchronisation before it finishes select Cancel Select Menu gt Control panel gt Settings and Connection gt VPN The Nokia mobile virtual private network VPN client creates a secure connection to compatible corporate intranet and services such as e mail Your device connects from a mobile network through the internet to a corporate VPN gateway that acts as a front door to the compatible corporate network The VPN client uses IP Security IPSec technology IPSec is a framework of open standards for supporting the secure exchange of data over IP networks VPN policies define the method used by the VPN client and a VPN gateway to authenticate each other and the Security and data management 137 Security and data management 138 encryption algorithms that they use to help protect the confidentiality of data For a VPN policy contact your company s IT department To install and configure the VPN client certificates and policies contact your company s IT department After installing a policy a VPN connection method is automatically created into Intranet Network destination To view your VPN policy installa
173. n alarm is due your device switches itself on and starts sounding the alarm tone Tip To define the time period after which the alarm sounds again when you set it to snooze select Options gt Settings gt Alarm snooze time To cancel an alarm select Options gt Remove alarm To change the time date and clock type settings select Options gt Settings To automatically update the time date and time zone information to your device network service select Options gt Settings gt Automatic time update gt On World clock Select Menu gt Applications gt Clock To view the time in different locations open the world clock tab To add locations to the list select Options gt Add location You can add a maximum of 15 locations to the list To set your current location scroll to a location and select Options gt Set as current location The location is displayed in the clock main view and the time in your device is changed according to the selected location Ensure that the time is correct and matches your time zone Clock settings Select Options gt Settings To change the time or date select Time or Date To change the clock shown on the home screen select Clock type gt Analogue or Digital To allow the mobile phone network to update the time date and time zone information to your device network service select Automatic time update gt On To change the alarm tone select Clock alarm to
174. nagement 130 Security and data management Manage the data and software on your device and take care of the security of the device and its contents C9 important Your device can only support one antivirus application Having more than one application with antivirus functionality could affect performance and operation or cause the device to stop functioning Lock the device The lock code protects your device against unauthorised use The preset code is 12345 To lock the device in the home screen press the power key and select Lock phone To unlock your device select Unlock enter the lock code and select OK To change the lock code select Menu gt Control panel gt Settings and General gt Security gt Phone and SIM card Enter the old code and then the new code twice The new code can be 4 255 characters long Both alphabets and digits can be used and both uppercase and lowercase alphabets are possible Write down the new code and keep it secret and ina Safe place separate from your device If you forget the lock code and your device is locked you must take the device to a Nokia authorised service facility and additional charges may apply To unlock the device the software must be reloaded and the data you have saved in the device may be lost You can also lock the device remotely by sending a text message to the device To enable remote locking and to define the text for the message select Menu gt
175. nd Options gt Search Scroll to the catalogues from which you want to search for items select Mark and enter the search keywords To start the search select Options gt Search Purchase history Select Menu gt Download and My items gt My downloads To open the selected item with the corresponding application select Options gt Open To view file details of the selected item select Options gt View details To start pause resume or cancel the download of the selected item select Options and the corresponding option Download settings Select Menu gt Download To change the Download settings select Options gt Applications gt Settings and from the following e Network connection Select the network destination used for the network connection e Automatic open Select whether you want the downloaded item or application to open automatically after the download is completed e Preview confirmation Select whether you want a confirmation query to be shown before previewing an item e Buy confirmation Select whether you want a confirmation query to be shown before buying an item e Subscript confirmation Select whether you want a confirmation query to be shown before subscribing to an item Connect your computer to web You can use your device to connect your PC to the web 1 Connect the data cable to the USB connectors of your device and your PC 2 Select Connect PC t
176. ne Barcode reader About Barcode reader Select Menu gt Applications gt Barcode Use the Barcode reader application to decode different types of codes for example codes in magazines The codes may contain information such as web and e mail addresses phone numbers and business cards The Barcode reader application does not support 1D codes The Barcode reader application uses the camera in your device to scan codes Select Menu gt Applications gt Barcode 1 Toscana code select Scan code 2 Set the code to fit the display The application attempts to scan and decode the code and the decoded information is displayed 3 To save the scanned data select Options gt Save The data is saved in the BCR file format in the Saved data folder To select the memory where the information is saved select Options gt Settings gt Memory in use 4 To use the decoded information select Options and the desired action The device reverts to the standby mode to save battery power if the Barcode reader application cannot be activated or if no keys are pressed for 1 minute ees 5 eN p Ag E ia i _ ig Ca f 7 v Ly Select Menu gt Office gt Dictionary To translate words from one language to another enter text in the search field As you enter text suggestions of words to translate are displayed To translate a word select the word from the list All languages may not be supported Select Options and fro
177. ne from the list or select Download sounds to open a bookmark folder containing a list of bookmarks for downloading tones using the browser If you have two alternate phone lines in use you can specify a ringing tone for each line e Video call tone Select a ringing tone for video Calls e Say caller s name If you select this setting and someone from your contacts list calls you the device sounds a ringing tone that is a combination of the spoken name of the contact and the selected ringing tone e Ringing type Select how you want the ringing tone to alert you e Ringing volume Set the volume level of the ringing tone e Message alert tone Select a tone for received text messages e E mail alert tone Select a tone for received e mail messages e Calendar alarm tone Select a tone for calendar alerts e Clock alarm tone Select a tone for clock alarms e Vibrating alert Set the device to vibrate when you receive a Call or message e Keypadtones Set the volume level of the keypad tones e Warning tones Turn the warning tones on or off e Opening sound or Closing sound Select the tone that sounds when you open or close the slide Language settings Select Menu gt Control panel gt Settings and General gt Personalisation gt Language To set the device language select Phone language To select the language in which you write notes and messages select Writing languag
178. network service To use the image as the background image select Options gt Set as wallpaper To add the image to a contact select Options gt Assign to contact Record videos Select Menu gt Applications gt Media gt Camera 1 If the camera is in image mode select video mode from the toolbar 2 To Start recording press the capture key 3 To pause recording select Pause Select Continue to resume recording 4 Tostop recording select Stop The video clip is automatically saved in Gallery The maximum length of the video clip depends on the available memory Play a video clip Select Menu gt Applications gt Media gt Camera To play a recorded video clip select Play from the toolbar Select from the following toolbar items e Send Send the video clip to other compatible devices Send to caller Send the video clip to the caller during an active call e Post to Send the video clip to an online album network service e Delete Delete the video clip To enter a new name for the video clip select Options gt Rename video clip Image settings Select Menu gt Applications gt Media gt Camera To change the still image settings select Options gt Settings and from the following e Image quality Set the image quality The better the image quality the more memory the image consumes e Show GPS info To add the location information to the captured image
179. nformation Encrypt device memory or memory card To encrypt the device memory select Phone memory To encrypt the memory card select Memory card and from the following Encrypt without saving key Encrypt the memory card without saving the encryption Key If you select this option you cannot use the memory card in other devices and if you restore factory settings you cannot decrypt the memory card e Encrypt and save key Encrypt the memory card and save the key manually in the default folder For security store the key to a safe place outside the device For example you can send the key to your computer Enter a pass phrase for the key and a name for the Key file The pass phrase should be long and complex e Encrypt with restored key Encrypt the memory card with a key you have received Select the key file and enter the pass phrase Decrypt device memory or memory card Always remember to decrypt the device memory and or the memory card before updating the device software To decrypt the device memory select Phone memory To decrypt the memory card without destroying the encryption key select Memory card gt Decrypt To decrypt the memory card and destroy the encryption key select Memory card gt Decrypt and turn off encryption Fixed dialling Select Menu gt Contacts and Options gt SIM numbers gt Fixed dial contacts With the fixed dialling service you can restrict calls from
180. nnections related to multimedia messaging To set the device to use a packet data connection only if you start an application or action that needs it select Menu gt Control panel gt Settings and Connection gt Packet data gt Packet data connection gt When needed If this does not help restart the device Q How do I save battery power A Many features in your device increase the demand on battery power and reduce the battery life time To save battery power do the following e Deactivate Bluetooth connectivity when you do not need it Stop the background scans for WLAN Select Menu gt Control panel gt Settings and Connection gt Wireless LAN gt Show WLAN availability gt Never You can still manually scan for available WLANs and connect to them as usual e Set the device to use a packet data connection only if you start an application or action that needs it Select Menu gt Control panel gt Settings and Connection gt Packet data gt Packet data connection gt When needed e Prevent the device from automatically downloading new maps in the Maps application Select Menu gt Applications gt GPS gt Maps and Options gt Tools gt Settings gt Internet gt Go online at Start up gt No e Change the time out period after which the backlight is switched off Select Menu gt Control panel gt Settings and General gt Personalisation gt Display gt Light time out e Close the applicat
181. nnel invitation select Options gt Save channel The channel is added to your PTT contacts channels view After you save the channel invitation you are asked if you want to connect to the channel Select Yes to open the PTT sessions view Your device logs in to the service if you are not logged in already If you reject or clear the invitation the invitation is stored in your messaging inbox To join the channel later open the invitation message and save the invitation Select Yes from the dialog to connect to the channel View the PTT log Select Options gt PTT log and Missed PTT calls Received PTT calls orCreated PTT calls To make a one to one call from the PTT log select a contact and press the PTT key PTT settings To change your push to talk PTT user settings select Options gt Settings gt User settings and from the following e Incoming calls Allow or block PTT calls e Incoming callback reqs Receive or block incoming callback requests e Accepted list calls Set the device to notify you of incoming PTT calls or answer the calls automatically e Callback request tone Select a ringing tone for callback requests Application start up Select if you want to login to the PTT service when you switch on your device e Default nickname Enter your default nickname that is displayed to other users You may not be able to edit this setting e Show my PTT address Select when
182. notes for the latest software versions and to download the Nokia Software Updater application see www nokia com softwareupdate or your local Nokia website To update the device software do the following Find help 21 Find help 22 1 Download and install the Nokia Software Updater application to your PC 2 Connect your device to the PC using a USB data cable and open the Nokia Software Updater application The Nokia Software Updater application guides you to back up your files update the software and restore your files Your device contains instructions to help to use the applications in your device To open help texts from the main menu select Menu gt Help gt Help and the application for which you want to read instructions When an application is open to access the help text for the current view select Options gt Help When you are reading the instructions to change the size of the help text select Options gt Decrease font size or Increase font size You may find links to related topics at the end of the help text If you select an underlined word a short explanation is displayed Help texts use the following indicators gt Link to a related help topic A Link to the application being discussed When you are reading the instructions to switch between help texts and the application that is open in the background select Options gt Show open apps and the desired application There are
183. notes in your presentation scroll to the corresponding object area and select Options gt Insert 6 To add slides select Options gt Insert gt New Slide To select the background colour for the presentation and background images for different slides select Options gt Background settings To set effects between images or slides select Options gt Effect settings To preview the presentation select Options gt Preview Multimedia presentations may only be viewed in compatible devices that support presentations They may appear different in different devices View presentations To view a presentation open the multimedia message from the Inbox folder Scroll to the presentation and press the scroll key To pause the presentation press either selection key To resume playing the presentation select Options gt Continue If the text or images are too large to fit on the display select Options gt Activate scrolling and scroll to see the entire presentation To find phone numbers and e mail or web addresses in the presentation select Options gt Find You may use these numbers and addresses to make calls send messages or create bookmarks for example View and save multimedia attachments To view multimedia messages as complete presentations open the message and select Options gt Play presentation Tip To view or play a multimedia object ina multimedia message select View image Play sound
184. o E My Videos in the 2 TO adjust the volume press the volume key memory card Select Options and from the following The transferred video clips appear in the My videos lt Resume download Resume a paused or failed folder in Video centre Video files in other folders of download your device are not displayed e Cancel download Cancel a download e Video details View information about a video Video centre settinc clip wiv J CUI GU Eh P e Find Find a video clip Enter a search term that In the Video centre main view select Options gt matches the file name Settings and from the following e Memory status View the amount of free and Video service selection Select the video services used memory that you want to appear in Video centre You can e Sort by Sort video clips Select the desired y a also add remove edit and view the details of a category video service You cannot edit preinstalled video e Move and copy Move or copy video clips Select services Copy or Move and the desired location e Connection settings To define the network destination used for the network connection select sfer ED ee rom vour PC Network connection To select the connection ee a a manually each time Video centre opens a network Transfer your own video clips to Video centre from connection select Always ask compatible devices using a compatible USB data cable To set GPRS connection on or off select Allo
185. o use Music player to listen to podcast episodes Podcasting is a method for delivering audio or video content over the internet using either RSS or Atom technologies for playback on mobile devices and PCs You can transfer music from other compatible devices to your device See Transfer music from PC p 111 Play a song or a podcast episode To add all available songs and podcasts to the music library select Options gt Refresh library To play a song or a podcast episode select the desired category and the song or podcast episode To pause playback press the scroll key to resume press the scroll key again To stop playback scroll down To fast forward or rewind press and hold the scroll key to the right or left To skip to the next item scroll right To return to the beginning of the item scroll left To skip to the previous item scroll left again within 2 seconds after a song or podcast has started To modify the tone of the music playback select Options gt Equaliser To modify the balance and stereo image or to enhance the bass select Options gt Audio settings To return to the home screen and leave the player playing in the background press the end key Playlists To view and manage playlists select Music library gt Playlists To create a new playlist select Options gt New playlist To add songs to the playlist select the song and Options gt Add songs gt Saved playlist or New
186. o web The necessary software is automatically installed from your device to the PC 3 Accept the installation in your PC Accept also the connection if prompted When the connection to the web is established the web browser of your PC opens You must have administrator rights to your PC and the autorun option enabled in the PC If you use Mac OS select PC Suite as the connection method For more information see www nokia com support Internet 19 Travelling 80 Need directions Looking for a restaurant Your device has the tools to get you where you want to be You can use applications such as GPS data to determine your location or measure distances and coordinates These applications require a GPS connection The coordinates in the GPS are expressed using the international WGS 84 coordinate system The availability of the coordinates may vary by region The Global Positioning System GPS is operated by the government of the United States which is solely responsible for its accuracy and maintenance The accuracy of location data can be affected by adjustments to GPS satellites made by the United States government and is subject to change with the United States Department of Defense civil GPS policy and the Federal Radionavigation Plan Accuracy can also be affected by poor satellite geometry Availability and quality of GPS signals may be affected by your location buildings natural obstacles and weather condi
187. of up to 2048 x 1536 pixels The image resolution in this guide may appear different To capture an image use the display as a viewfinder and press the capture key The device saves the image in Gallery The toolbar provides you with shortcuts to different items and settings before and after capturing an image or recording a video Select to a toolbar item and press the scroll key ffs Switch to image mode Switch to video mode F Select the scene ES Switch the video light off video mode only Media Switch the video light on video mode only Select the flash mode images only Activate the self timer images only Activate sequence mode images only Select a colour tone Adjust the white balance Adjust the exposure compensation images only The available options vary depending on the capture mode and view you are in The settings return to the default values when you close the camera To customise the camera toolbar switch to image mode and select Options gt Customise toolbar To view the toolbar before and after capturing an image or recording a video select Options gt Show toolbar To view the toolbar only when you need it select Options gt Hide toolbar SBE amp V Scenes Select Menu gt Applications gt Media gt Camera A scene helps you to find the right colour and lighting settings for the current environment The settings of each scene have been set according to a cer
188. okia Video CONG cciiss ievcestscs ccicetscssasicasiecadisteiiiedes 106 Nokia POCCASTING cccsecccessscscssssscesssssecsssseseeees 109 MUSIC Player anoa O 110 RealPlavVE rannen T TEETE 113 RECO FOC A EAER 113 Rasm pla Ve a E Ss 114 FIM LC o PAA AENEA EAR A EAA 114 Nokia Internet RAGIO eee cccssteccesssssteesesseeeeees 115 Dr GAC sik E E A E S AAS EA EEE 117 CONMNECTIVITY ccccccccccccccccccccccscccccccecs 122 Fast downloading eeeesseeeessseesssseesssssessssssessssseees 122 Data CAG cee disancstciatebsrucatieccistchinstearieisesbctndteerierisatbnks 122 Contents Contents BUC EOOU Mansi E 123 SIM ACCESS PLOFilO cee cccssteccscssseccscsssecssesseeeseees 126 WIREIGSS AN E E E a ce ELE a 127 Connection MANAGES cceeeesssssscccssesssssseseseceseees 128 Security and data management 130 LOCK the COVICE cc cecesccssesccsssccsssesssssessssessscseseeees 130 Memory card SECULILY cccccccceccssssccsesssssseseeseeees 130 ER CEY DO Mar AOA 131 PIKE CCA aeu a ED 131 Certificate manade oneni eini 132 View and edit security MOCUIES ec eeeeeeeeeee 133 Application MANAGEN ccccccccccescsscccssssscssssseeeees 134 Application Update u ce ccccsssccccsssssecsssseseeees 136 LICENSES oa a ened anne aeieee 136 SAVAN EAEE EE EEEE A E E EEEE 137 MICE DIN ieri coesuasenvavausecon cates suuavsunecvooasssiocuse 137 SENOS socaceccccacoseshsoeseekicc
189. ollowing e Contacts to display Select the memories from where contacts are displayed e Default saving memory Select the default memory to save contacts e Name display Change the way the contacts names are displayed e Default contact list Select which contacts directory opens when you open the Contacts application e Remote search server Change the remote contacts database This option is available only if remote contacts database is supported by your service provider You can have several applications open at the same time To switch between active applications press and hold the home key scroll to an application and press the scroll key To close the selected application press the backspace key Example When you have an active phone call and want to check your calendar press the home key to access the menu and open the Calendar application The phone call remains active in the background Example When you are writing a message and want to check a web site press the home key to access the menu and open the Web application Select a bookmark or enter the web address manually and select Go to To return to your message press and hold the home key scroll to the message and press the scroll key JP With Ovi Files you can use your Nokia E75 to access content on your computer if it is switched on and connected to the internet You will need to install the Ovi Files application on every compu
190. on all networks other features may require that you make specificarrangements with your service provider to use them Network services involve transmission of data Check with your service provider for details about fees in your home network and when roaming on other networks Your service provider can explain what charges will apply Some networks may have limitations that affect how you can use some features of this device requiring network support such as support for specific technologies like WAP 2 0 protocols HTTP and SSL that run on TCP IP protocols and language dependent characters Your service provider may have requested that certain features be disabled or not activated in your device If so these features will not appear on your device menu Your device may also have customized items such as menu names menu order and icons Quick start guide Your Nokia E75 is a business device that adapts to your free time as well Read these first pages to get started then use the rest of the guide to explore what new features Nokia E75 brings to you SIM card battery charging memory card Put the pieces together and get started with your Nokia E75 Insert the SIM card and battery 1 To open the back cover of the device with the back facing you unlock the back cover release button and lift the back cover gt If the battery is inserted lift the battery in the direction of the arrow to remove it Qu
191. ona blank spot on a web page To move within the toolbar scroll left or right To select a feature press the scroll key Internet 13 Internet 14 From the toolbar select from the following e JdRecently visited pages View a list of the web addresses you visit frequently e Overview View an overview of the current web page e Q Search by keyword Search on the current web page Reload Refresh the web page Subscribe to web feeds if available View a list of available web feeds on the current web page and subscribe to a web feed Navidate par ges Mini Map and Page overview help you navigate web pages that contain a large amount of information To activate Mini Map select Options gt Settings gt General gt Mini map gt On When you scroll through a large web page Mini Map opens and shows an overview of the page To move in Mini Map scroll left right up or down When you find the desired location stop scrolling Mini Map disappears and leaves you at the selected location When you are browsing a web page that contains a large amount of information you can also use Page overview to view what kind of information the web page contains To see an overview of the current web page press 8 To find the desired spot on the web page scroll up down left or right Press 8 again to zoom in and view the desired section of the web page zj oa i i AFF n E ofl E ae o
192. onic components can be damaged Do not store the device in high or cold temperature High temperatures can shorten the life of electronic devices damage batteries and warp or melt certain plastics When the device warms to its normal temperature from a cold temperature moisture can form inside the device and damage electronic circuit boards Do not attempt to open the device other than as instructed in this guide Do not drop Knock or shake the device Rough handling can break internal circuit boards and fine mechanics Do not use harsh chemicals cleaning solvents or strong detergents to clean the device Only use a soft clean dry cloth to clean the surface of the device e Do not paint the device Paint can clog the moving parts and prevent proper operation e Use only the supplied or an approved replacement antenna Unauthorised antennas modifications or attachments could damage the device and may violate regulations governing radio devices e Use chargers indoors e Backup all data you want to keep such as contacts and calendar notes To reset the device from time to time for optimum performance power off the device and remove the battery These suggestions apply equally to your device battery charger or any accessory Always return your used electronic products batteries and packaging materials to dedicated collection points This way you help prevent uncontrolled waste disposal and promote the
193. ontact information such as phone numbers home addresses and e mail addresses of your contacts You can add a personal ringing tone or a thumbnail image to a contact You can also create contact groups which allow you to communicate with several contacts at the same time and send contact information to compatible devices Whenever you see the icon scroll right to access a list of available actions To close the list scroll left Work with contacts Select Menu gt Contacts To create a contact select Options gt New contact and enter the details of the contact To copy contacts from the memory card if available select Options gt Create backup gt Memory card to phone To search for contacts start entering the contact s name in the search field Create contact groups Select Menu gt Contacts 1 To create a contact group scroll to each contact you want to add to the group and select Options gt Mark Unmark gt Mark 2 Select Options gt Group gt Add to group gt Create new group and enter a name for the group New from Nokia Eseries 37 New from Nokia Eseries 38 If you want to make conference calls to the group using a conference service define the following e Conf service number Enter the conference call service number e Conf service ID Enter the conference call ID e Conf service PIN Enter the conference call PIN code To make a conference call to the group u
194. onvert measurements Select Menu gt Office gt Converter 1 Scroll to the type field and select Options gt Conversion type to open a list of measures Select the measurement type to use other than currency and OK 2 Scroll to the first unit field and select Options gt Select unit Select the unit from which to convert and OK Scroll to the next unit field and select the unit to which to convert 3 Scroll to the first amount field and enter the value to convert The other amount field changes automatically to show the converted value Set base currency and exchange rate Select Menu gt Office gt Converter When you change base currency you must enter new exchange rates because all previously set exchange rates are cleared Before you can make currency conversions you must choose a base currency and add exchange rates The rate of the base currency is always 1 The base currency determines the conversion rates of the other currencies Nokia Office Tools 93 Nokia Office Tools 94 1 To set the exchange rate for the unit of currency scroll to the type field and select Options gt Currency rates 2 Scroll to the currency type and enter the exchange rate you would like to set per single unit of currency 3 To change the base currency scroll to the currency and select Options gt Set as base currency 4 Select Done gt Yes to save the changes After you have set all the necessary exc
195. ooth 1 When you activate Bluetooth connectivity for the first time you are asked to name your device Give your device a unique name to make it easy to recognise if there are several Bluetooth devices nearby 2 Select Bluetooth gt On 3 Select My phone s visibility gt Shown to all or Define period If you select Define period you need to define the time during which your device ivity Connect 123 ivity Connect 124 is visible to others Your device and the name you entered can now be seen by other users with devices using Bluetooth technology 4 Open the application where the item you want to send is stored 5 Select the item and Options gt Send gt Via Bluetooth The device searches for other devices using Bluetooth technology within range and lists them Tip If you have sent data using Bluetooth connectivity before a list of the previous search results is displayed To search for more Bluetooth devices select More devices 6 Select the device with which you want to connect If the other device requires pairing before data can be transmitted you are asked to enter a passcode When the connection has been established Sending data is displayed The Sent folder in the Messaging application does not store messages sent using Bluetooth connectivity To receive data using Bluetooth connectivity select Bluetooth gt Onand My phone s visibility gt Shown to all to receive data from a non p
196. orrect multimedia message settings automatically If not contact your service provider for the correct settings order the settings from your service provider in a configuration message or use the Settings wizard application Select Menu gt Messaging CF important Exercise caution when opening messages Messages may contain malicious software or otherwise be harmful to your device or PC Before you can create a multimedia message or write an e mail you must have the correct connection settings in place The wireless network may limit the size of MMS messages If the inserted picture exceeds this limit the device may make it smaller so that it can be sent by MMS Check the size limit of e mail messages with your service provider If you attempt to send an e mail message that exceeds the size limit of the e mail server the message is left in the Outbox folder and the device attempts to resend it periodically Sending an e mail requires a data connection and continuous attempts to resend the e mail may increase your phone bill In the Outbox folder you can delete such a message or move it to the Drafts folder 1 Select New message gt Message to send a text or multimedia message MMS Audio message to send a multimedia message that includes one sound clip or E mail to send an e mail message 2 Inthe To field press the scroll key to select recipients or groups from the contacts list or enter the recipient s phone nu
197. ost select Tags To add tags to your post select a tag from the list and Done To add several tags to the post select each tag and Options gt Mark Unmark gt Mark To search for tags enter the search text in the search field To add a tag to the tag list select Options gt New tag Manage posts in Outbox Select Menu gt Applications gt Media gt Share online Outbox shows the posts you are currently uploading posts that have failed to upload and the posts you have sent To open Outbox select Outbox gt Options gt Open To start uploading a post select the post and Options gt Upload now To cancel uploading a post select the post and Options gt Cancel To delete a post select the post and Options gt Delete View service content Select Menu gt Applications gt Media gt Share online To view the content of a service select the service and Options gt Open To open a feed select the feed To open the feed in the browser select the service provider s website To view comments related to a file select the file and Options gt View comments To view a file in full screen mode select the file To update a feed select the feed and Options gt Update now If you see an interesting file and want to download the entire feed to your device select the file and Options gt Subscribe to contact Service provider settings Select Menu gt Applications gt Media gt Shar
198. other and save locations and send them to compatible devices You can also purchase licences for extra services such as travel guides traffic information and navigation Travelling 83 Travelling 84 service with voice guidance These services are not available for all countries or regions When you use Maps for the first time you may need to select an internet access point for downloading maps If you browse to an area which is not covered by maps already downloaded in your device a map for the area is automatically downloaded through the internet Some maps may be available in your device or memory card You can also use the Nokia Map Loader PC software to download maps To install Nokia Map Loader to a compatible PC see www nokia com maps Tip To avoid data transfer costs you can also use Maps without an internet connection and browse the maps that are saved in your device or ona memory card Almost all digital cartography is inaccurate and incomplete to some extent Never rely solely on the cartography that you download for use in this device Downloading maps and extra services may involve the transmission of large amounts of data through your service provider s network For more information on data transmission charges contact your service provider Select Menu gt Applications gt GPS gt Maps You can use the mobile network to find your current location even indoors This is faster but less accur
199. other magnetic storage media near the device because information stored on them may be erased Operation of radio transmitting equipment including wireless phones may interfere with the function of inadequately protected medical devices Consult a physician or the manufacturer of the medical device to determine whether they are adequately shielded from external RF energy Switch off your device when regulations posted instruct you to do so Hospitals or health care facilities may use equipment sensitive to external RF energy Manufacturers of medical devices recommend a minimum separation of 15 3 centimetres 6 inches between a wireless device and an implanted medical device such as a pacemaker or implanted cardioverter defibrillator to avoid potential interference with the medical device Persons who have such devices should Always keep the wireless device more than 15 3 centimetres 6 inches from the medical device e Not carry the wireless device in a breast pocket e Hold the wireless device to the ear opposite the medical device e Turn the wireless device off if there is any reason to suspect that interference is taking place e Follow the manufacturer directions for the implanted medical device If you have any questions about using your wireless device with an implanted medical device consult your health care provider Some digital wireless devices may interfere with some hearing aids Your mobile device
200. ovider for the SIP profile settings and save them to your device Your service provider may send you the settings or give you a list of the needed parameters To add a SIP address to a contact wm BW NY Select Menu gt Contacts Select the contact or create a new contact Select Options gt Edit Select Options gt Add detail gt Share video Enter the SIP address in the format username domainname you can use an IP address instead of a domain name If you do not know the SIP address for the contact you can use the phone number of the recipient including the country code to share video if supported by the network service provider UMTS connection settings To set up your UMTS connection Contact your service provider to establish an agreement for you to use the UMTS network Ensure that the UMTS access point connection settings for your device are configured properly For more information about the settings contact your service provider During an active voice call select Options gt Share video 1 To share live video during the call select Live video To share a video clip select Video clip and the clip you want to share You may need to convert the video clip into a suitable format to be able to share it If your device notifies you that the video clip must be converted select OK Your device must have a video editor for the conversion to work If the recipient has several SIP addresses or
201. phone numbers including the country code saved in the contacts list select the desired address or number If the SIP address or phone number of the recipient is not available enter the address or number of the recipient including the country code and select OK to send the invitation Your device sends the invitation to the SIP address Sharing begins automatically when the recipient accepts the invitation Options during video sharing Zoom the video available for sender only Adjust the brightness available for sender only Yor Mute or unmute the microphone sd or X gt Turn the loudspeaker on and off Q or O Pause and resume video sharing E7 Switch to full screen mode available for receiver only 3 To end the sharing session select Stop To end the voice call press the end key When you end the call video sharing also ends To save the live video you shared select Yes when prompted The device notifies you of the memory location of the saved video To define the preferred memory location select Menu gt Control panel gt Settings and Connection gt Video sharing gt Preferred saving memory If you access other applications while you are sharing a video clip the sharing is paused To return to the video sharing view and to continue sharing in the home screen select Options gt Continue When someone sends you a video sharing invitation the invitation message displays the sender s na
202. phone number to an existing contact To copy the number for example to paste it to a text message select Options gt Use number gt Copy To view a single type of communication event or communication events with one other party select Options gt Filter and the desired filter To erase the contents of the log recent calls register and messaging delivery reports permanently select Options gt Clear log Call and send messages from Log Select Menu gt Log To call back a caller select Recent calls gt Missed Calls Received calls or Dialled numbers Select the caller and Options gt Call To reply to a caller with a message select Recent calls gt Missed calls Received calls or Dialled numbers Select the caller and Options gt Create message and send a message Log settings Select Menu gt Log To set the time for keeping all communication events in the log select Options gt Settings gt Log duration and the time If you select No log all log contents are permanently deleted Internet With your Nokia E75 you can browse both the internet and your company s intranet and download and install new applications to your device You can also use your device as a modem and connect your PC to the internet Browser Browse the web Select Menu gt Web Shortcut To start the browser press and hold 0 in the home screen To browse the web in the bookmarks view select a bookmark or start to
203. press the chr key To copy text press and hold the shift key and scroll to highlight the word phrase or line of text you want to copy Press Ctrl C To insert the text into a document move to the correct place and press Ctrl V To change the writing language or to activate predictive text input select Options gt Input options and the appropriate option Predictive text input To activate predictive text input select Options gt Input options gt Activate prediction The indicator ANG is displayed When you start writing a word your device suggests possible words When the correct word is found scroll right to confirm it While writing you can also scroll down to access a list of suggested words Ifthe desired word is on the list select the word If the word you are writing is not in the dictionary of the device the device suggests a possible word while the word you were writing is shown above the suggested word Scroll up to select your word The word is added to the dictionary when you start writing the next word To deactivate predictive text input select Options gt Input options gt Deactivate prediction To define the settings for text input select Options gt Input options gt Settings To change the writing language select Options gt Input options gt Writing language Search About Search Select Menu gt Applications gt Search Search enables you to use various internet based search
204. ptions take more space and limit the number of characters that can be sent in a single message You may not be able to send video clips that are saved in the MP4 file format or that exceed the size limit of the wireless network in a multimedia message Text messages on the SIM card Select Menu gt Messaging and Options gt SIM messages Text messages may be stored on your SIM card Before you can view SIM messages you must copy the messages to a folder in the device After copying the messages to a folder you can view them in the folder or delete them from the SIM card 1 Select Options gt Mark Unmark gt Mark or Mark all to mark every message 2 Select Options gt Copy 3 Select a folder and OK to begin copying To view SIM card messages open the folder where you copied the messages and open a message Receive and reply to multimedia messages CP important Exercise caution when opening messages Messages may contain malicious software or otherwise be harmful to your device or PC Tip If you receive multimedia messages that contain objects unsupported by your device you cannot open them Try to send these objects to another device such as a computer and open them there Messaging 49 Messaging 50 1 To reply to a multimedia message open the message and select Options gt Reply 2 Select To sender to reply to the sender To all to reply to everyone included in the received message Via a
205. rd the messages that are exchanged during a conversation or while you are joined to an IM group select Options gt Save conversation To stop recording select Options gt Stop recording To view the recorded chats in the main view select Options gt Saved conversations Search for IM groups and users To search for IM groups and users in the IM community main view first scroll to an item such as one of your own status items or to an item within one of your IM contact lists To search for groups select Options gt New conversation gt Search for groups You may be able to search by group name topic and members user ID To search for users select Options gt New IM contact gt Search from server You may be able to search by user s name user ID phone number and e mail address When a search is complete select Options and from the following e More results To retrieve further search results e Previous results To retrieve previous search results if they are available e Add to IM contacts To add a contact to your IM contacts Messaging 57 Messaging 58 e Open conversation To open a conversation with a contact e Send invitation To invite a contact to chat e Blocking options To block messages from a contact add a contact to the blocked list or view the list of blocked contacts e Join To join the chat group e Save To save a retrieved chat group as a fa
206. re asked to enter the relevant passcodes To connect to a hidden network you must enter the correct service set identifier SSID To use the found WLAN for a net call connection select the row showing the status Use for the desired net call service and the WLAN to be used Ga r i gt in Za Be L A PN M a e gas a a ay a a g HARAT ep A AAWA P B Le E F i g SG st ts es EO CAN w Select Menu gt Control panel gt Connectivity gt Conn mgr end a 4 r y i A l a j To see the open data connections select Active data connections To view detailed information about network connections select a connection from the list and Options gt Details The type of information shown depends on the connection type To end the selected network connection select Options gt Disconnect To end all active network connections simultaneously select Options gt Disconnect all Search for WLAN To search for WLANS available within range select Available WLAN networks The available WLANs are listed with their network mode infrastructure or ad hoc signal strength and network encryption indicators and whether your device has an active connection with the network To view the details of a network scroll to it and press the scroll key To create an internet access point for a network select Options gt Define access point ivity Connect 129 Security and data ma
207. rect line of sight The two devices only need to be within a maximum of 10 metres of each other although the connection can be subject to interference from obstructions such as Walls or other electronic devices Several Bluetooth connections can be active at a time For example if your device is connected to a headset you can also transfer files to another compatible device at the same time This device is compliant with Bluetooth Specification 2 0 EDR supporting the following profiles Advanced Audio Distribution Audio Video Remote Control Basic Imaging Basic Printing Device ID Dial up Networking File Transfer Generic Audio Video Distribution Generic Access Generic Object Exchange Handsfree Human Interface Device Headset Object Push Phone Book Access Serial Port and SIM Access To ensure interoperability between other devices supporting Bluetooth technology use Nokia approved accessories for this model Check with the manufacturers of other devices to determine their compatibility with this device Features using Bluetooth technology increase the demand on battery power and reduce the battery life pen B s e e e g FY Arar fi rn AN lay a a wh Wa F LAJT a DEBE ou E gm g We Eiri ei We yeu i E a j a uU YVL UU LOI A A E y Se a OH el Wy L lt Ges Wh W Gs Vw Gi amp Wi wwe Tw m 5 La A a ATA sLIeGTOOTN SEV CY WY amp B Select Menu gt Control panel gt Connectivity gt Bluet
208. recycling of materials Check product environmental information and how to recycle your Nokia products at www nokia com werecycle or nokia mobi werecycle y The crossed out wheeled bin symbol on your product battery literature or packaging m reminds you that all electrical and electronic products batteries and accumulators must be taken to separate collection at the end of their working life This requirement applies in the European Union Do not dispose of these products as unsorted municipal waste For more environmental information see the product Eco Declarations at www nokia com environment Taking care of your device 169 Additional safety information 170 Your device and its accessories are not toys They may contain small parts Keep them out of the reach of small children This device meets RF exposure guidelines in the normal use position at the ear or at least 2 2 centimetres 7 8 inch away from the body Any carry case belt clip or holder for body worn operation should not contain metal and should position the device the above stated distance from your body To send data files or messages requires a quality connection to the network Data files or messages may be delayed until such a connection is available Follow the separation distance instructions until the transmission is completed Parts of the device are magnetic Metallic materials may be attracted to the device Do not place credit cards or
209. ries in which there are stations broadcasting e Top stations View the most popular stations in the directory Internet radio settings Select Menu gt Applications gt Media gt Radio gt Internet radio and Options gt Settings To select the default access point to connect to the network select Default access point and from the available options If you want the device to ask you to select the access point every time you open the application select Always ask To change the connection speeds for different connection types select from the following e GPRS connection bitrate GPRS packet data connections e 3G connection bitrate 3G packet data connections e Wi Fi connection bitrate WLAN connections The quality of the radio broadcast depends on the selected connection speed The higher the speed the better the quality To avoid buffering use the highest quality only with high speed connections Media N Gage About N Gage Select Menu gt Applications gt Media gt N Gage With N Gage you can download free game trials to try out new games and buy the ones you like You can play the games by yourself or with friends N Gage also provides a way to keep in touch with other players and to track and share your scores and other gaming achievements Download games Select Menu gt Applications gt Media gt N Gage To view a list of games available for download open the store tab and selec
210. rinting Printing options Open a document such as a file or message and select Options gt Printing options gt Print Define the following options e Printer Select an available printer from the list e Print Select All pages Even pages or Odd pages as the print range e Print range Select All pages in range Current page or Defined pages as the page range e Number of copies Select the number of copies to print e Printto file Select to print to a file and determine the location for the file The available options may vary Printer settings Select Menu gt Control panel gt Printers To add a new printer select Options gt Add Define the following Printer Enter a name for the printer Driver Select a driver for the printer Bearer Select a bearer for the printer Access point Select the access point Port Select the port Host Define the host User Enter the user Queue Enter the print queue Orientation Select the orientation Paper size Select the paper size Media type Select the media type Colour mode Select the colour mode Printer mode Select the printer model The available options may vary Image print You can print images from your device using a printer compatible with PictBridge You can only print images that are in the JPEG file format To print images in Gallery camera or image viewer mark the images and sel
211. rnet call provider if both are activated Connections in all conditions cannot be guaranteed You should never rely solely on any wireless device for essential communications like medical emergencies To make an emergency call 1 If the device is not on switch it on Check for adequate signal strength Depending on your device you may also need to complete the following e Insert a SIM card if your device uses one e Remove certain call restrictions you have activated in your device e Change your profile from Offline or Flight profile to an active profile 2 Press the end key as many times as needed to clear the display and ready the device for calls 3 Enter the official emergency number for your present location Emergency numbers vary by location 4 Press the call key When making an emergency Call give all the necessary information as accurately as possible Your wireless device may be the only means of communication at the scene of an accident Do not end the call until given permission to do so This mobile device meets guidelines for exposure to radio waves Your mobile device is a radio transmitter and receiver It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines These guidelines were developed by the independent scientific organisation ICNIRP and include Safety margins designed to assure the protection of all persons regardless of age and health
212. ront of you during a PTT call so you can see the display Speak towards the microphone and do not cover the loudspeaker with your hands Make a group call To call a group select Options gt PTT contacts gt Contacts mark the contacts you want to call and select Options gt Talk to many Answer a PTT call To answer a one to one call press the call key To dismiss the call press the end key Tip You can also make a one to one or group call from Contacts Select Options gt PTT gt Talk 1 to 1 or Talk to many Phone Callback requests To send a callback request In the contacts list scroll to the desired name and select Options gt Send callback request When someone sends you a Callback request 1 new callback request is displayed in the home screen To respond to a callback request Select Show a contact and Options gt Talk 1 to 1 to Start a one to one Call PTT groups Channels A PTT channel consists of a group of people for example friends or a work team who joined the channel after they were invited When you call a channel all members joined to the channel hear the 69 call simultaneously Phone 70 You can join pre configured channels Public channels are open to anyone who Knows the URL for the channel When you are connected to a channel and talk all members joined to the channel hear you talking Up to five channels can be active at the same time Select Options gt PTT
213. rovider Content search Select Menu gt Web To search for text phone numbers or e mail addresses within the current web page select Options gt Find keyword and the appropriate option To go to the next match scroll down To go to the previous match scroll up Tip To search for text within the current web page press 2 Bookmarks Select Menu gt Web Select Options gt Goto gt Bookmarks You can select web addresses from a list or from a collection of bookmarks in the Recently visited pages folder If you start to enter a web address the field opens automatically indicates the homepage defined for the default access point To go to a new web page select Options gt Goto gt New web page To send and add bookmarks or to set a bookmark as the homepage select Options gt Bookmark options To edit move or delete bookmarks select Options gt Bookmark manager Internet Empty the cache The information or services you have accessed are stored in the cache memory of the device A cache is a memory location that is used to store data temporarily If you have tried to access or have accessed confidential information requiring passwords empty the cache after each use To empty the cache select Options gt Clear privacy data gt Cache End the connection To end the connection and close the browser select Options gt Exit To delete the information the network server collects a
214. s To customise a profile select a profile and Options gt Personalise To change a profile select a profile and Options gt Activate The Offline profile prevents your device from accidentally switching on sending or receiving messages or using wireless LAN Bluetooth connectivity GPS or FM radio it also closes any internet connection that may be in operation when the profile is selected The Offline profile does not prevent you from establishing a wireless LAN or Bluetooth connection at a later time or from restarting the GPS or FM radio so comply with any applicable safety requirements when establishing and using these features To set the profile to be active until a certain time within the next 24 hours scroll to the profile select Options gt Timed and set the time When the time expires the profile changes back to the previously active non timed profile When the profile is timed is displayed in the home screen The Offline profile cannot be timed To delete a profile that you created select Options gt Delete profile You cannot delete the predefined profiles D Ss i Sete ad Eee To set a ringing tone for a profile select Options gt Personalise gt Ringing tone Select a ringing tone from the list or select Download sounds to opena bookmark folder containing a list of bookmarks for downloading tones using the browser Any downloaded tones are saved to Gallery To play the ring
215. s 37 adding ringing tones 38 contact groups 3 7 searching 38 settings 38 synchronising 137 content synchronising sending and retrieving 17 converting currencies 93 measurements 93 currency conversions 93 data connections synchronisation 137 date settings 142 date andtime 96 decrypting device memory and memory card 131 device manager 20 dictionary 97 display indicators 25 settings 140 Download managing items 78 purchase history 78 search settings 78 settings 78 subscriptions 78 DTMF tones 66 e mail 46 accounts 44 adding attachments 43 deleting 44 disconnecting 44 downloading attachments 43 folders 44 mailbox 54 out of office reply 44 reading 43 searching 44 sending 42 settings 45 54 setup 17 42 synchronisation 45 e mail accounts 54 e mail key 35 e mail key settings 144 EAP plug in settings 151 using an EAP plug in 151 encrypting device memory and memory card 131 ending network connections 128 enhancements remote SIM access 126 equaliser 112 Index feeds news 74 file manager 92 files downloading 102 flash files 114 175 fixed dialling 131 Index 176 FMradio 114 gallery 102 GPRS settings 148 GPS position requests 82 GPS global positioning system 80 headset connecting 15 help application 22 home key 35 home screen 34 settings 30 HSDPA 122 IM See instant messaging images adding to contacts 102 display background 102 rotating 102 sending 102 zooming 102
216. server configuration you may need to enter other information in addition to those listed If you do not know the correct information contact your company s IT department With Mail for Exchange the use of the lock code may be mandatory The default lock code of your device is 12345 but your company s IT administrator may have set a different one for you to use You can access and modify the Mail for Exchange profile and settings in the Messaging settings With Message reader you can listen to text multimedia and audio messages and e mail To listen to new messages or e mail in the home screen press and hold the left selection key until Message reader starts To listen to a message from your Inbox or e mail from your Mailbox scroll to the message and select Options gt Listen To stop the reading press the end key To pause and continue the reading press the scroll key To skip to the next message scroll right To replay the current message or e mail scroll left To skip to the previous message scroll left at the beginning of the message To view the current message or e mail in text format without the sound select Options gt View Select Menu gt Control panel gt Phone gt Speech With Speech you can set the language voice and voice properties for the message reader To set the language for the message reader select Language To download additional languages to your device select Options gt Down
217. signed applications to the keys in which case you cannot change them 1 R os J pa 2 3 1 Home key 2 Calendar key 3 E mail key Key Press quickly Press and hold Access the home View the list of active applications Home key 1 screen from an open application When you are in the home screen access the Menu Create a new meeting entry Calendar key 2 Open the Calendar application When you are in the Calendar application access the home screen Quick start guide 13 Quick start guide 14 E mail key 3 Open your Create a new e default mailbox mail message When you are in your default mailbox access the home screen open the keyboard slide the keyboard out In all applications the screen rotates automatically from portrait to landscape when you Slide the keyboard out 1 Function key To insert digits or characters printed at the top of keys press and hold the function key and press the corresponding key or press and hold the corresponding key only To enter only the characters printed at the top of keys press the function key twice quickly To return to normal mode press the function key again 2 Shift key To switch between character cases press the shift key To enter only uppercase or lowercase letters press the shift key twice quickly 3 Chr key When writing text pre
218. sing the conference service select the group scroll right and select Call conf service Search for contacts ina remote database To activate remote contact search select Options gt Settings gt Contacts gt Remote search server To search for contacts in a remote database select Contacts gt Options gt Search from remote Enter the name of the contact you want to search for and select Search The device establishes a data connection to the remote database To search for contacts in the home screen start entering characters in the home screen and select the database from the proposed matches To change the remote contacts database select Options gt Settings gt Contacts gt Remote search server This setting affects the database used in the Contacts and Calendar applications and the home screen but not the database that is used for e mail Add ringing tones for contacts Select Menu gt Contacts To add a ringing tone for a contact select the contact Options gt Ringing tone and a ringing tone The ringing tone sounds when the contact calls you To add a ringing tone for a contact group select the contact group Options gt Group gt Ringing tone and a ringing tone To remove the ringing tone select Default tone from the list of ringing tones Change Contacts settings Select Menu gt Contacts To change the settings of the Contacts application select Options gt Settings and from the f
219. ss the chr key to insert characters not shown on the keyboard 4 Space key 5 Ctrl key To access the shortcuts behind the ctrl key such as ctrl C 6 Backspace key To access Slide settings select Menu gt Control panel gt Settings and General gt Slide handling a A S i A m A GW sw SFE Gs BY When the device or keypad is locked calls may be possible to the official emergency number programmed into your device The keypad of your device locks automatically to prevent the keys from being accidentally pressed To change the period after which the keypad is locked select Menu gt Control panel gt Settings and General gt Security gt Phone and SIM card gt Keypad autolock period To lock the keys manually in the home screen press the left selection key and To unlock the keys press the left selection key and Accessories You can connect your device to a range of compatible accessories Check the availability of the approved accessories with your dealer Connect the headset Cd warning When you use the headset your ability to hear outside sounds may be affected Do not use the headset where it can endanger your Safety Connect the compatible headset to the headset connector of your device Quick start guide Attach a wrist strap Thread the wrist strap and tighten it Home screen In the home screen you
220. st of blocked devices ivity Connect 125 ivity IVI Connect Operating the device in hidden mode is a safer way to avoid malicious software Do not accept Bluetooth connectivity from sources you do not trust Alternatively switch off the Bluetooth function This does not affect other functions of the device Select Menu gt Control panel gt Connectivity gt Bluetooth When you are not using Bluetooth connectivity select Bluetooth gt Off or My phone s visibility gt Hidden Do not pair with an unknown device With the SIM access profile you can access the SIM card of your device from a compatible car kit device This way you do not need a separate SIM card to access SIM card data and connect to the GSM network To use the SIM access profile you need the following e Compatible car kit device that supports Bluetooth wireless technology e Valid SIM card in your device When the wireless device is in the remote SIM mode you can only use a compatible connected accessory such as a car kit to make or receive calls Your wireless device will not make any calls except to the emergency numbers programmed into your device 126 while in this mode To make calls you must first leave the remote SIM mode If the device has been locked enter the lock code to unlock it first For more information about car kit devices and compatibility with your device see the Nokia web site and your car kit user guide
221. stalled in the Installations folder in the main menu To see which software packages are installed or removed and when select Options gt View log CF important Your device can only support one antivirus application Having more than one application with antivirus functionality could affect performance and operation or cause the device to stop functioning After you install applications to a compatible memory card installation files sis sisx remain in the device memory The files may use large amounts of memory and prevent you from storing other files To maintain sufficient memory use Nokia PC Suite to back up installation files to a compatible PC then use the file manager to remove the installation files from the device memory If the sis file is a message attachment delete the message from the Messaging inbox Select Menu gt Control panel gt App mgr Scroll to a software package and select Options gt Uninstall Select Yes to confirm If you remove software you can only reinstall it if you have the original software package or a full backup of the removed software package If you remove a software package you may no longer be able to open documents created with that software If another software package depends on the software package that you removed the other software package may stop working For more information see the documentation of the installed software package Select Menu gt Control pane
222. start setting up your corporate e mail account When setting up your internet e mail you may need to contact your e mail service provider to obtain your e mail account type POP or IMAP 1 To start the wizard go to the home screen and select the E mail wizard 2 Enter your e mail address and password If the wizard is not able to configure your e mail settings automatically you need to select your e mail account type and enter the related account settings If your device contains any additional e mail clients those are offered to you when you start the E mail wizard Send e mail Select Menu gt Messaging 1 Select your mailbox and Options gt Create email 2 Inthe To field enter the recipient s e mail address If the recipient s e mail address can be found in Contacts start entering the recipient s name and select the recipient from the proposed matches If you add several recipients insert to separate the e mail addresses Use the Cc field to send a copy to other recipients or the Bcc field to send a blind copy to recipients If the Bcc field is not visible select Options gt More gt Show Bcc field 3 Inthe Subject field enter the subject of the e mail 4 Enter your message in the text area 5 Select Options and from the following e Add attachment Add an attachment to the message Priority Set the priority of the message Flag Flag the message for follow up Insert template
223. structions on the display Or open one of the access point groups select an access point marked with 8 and select Edit Use the instructions provided by your service provider to edit the following WLAN network name Select Enter manually or Search for networks If you select an existing network WLAN network mode and WLAN security mode are determined by the settings of its access point device e Network status Define whether the network name is displayed e WLAN network mode Select Ad hoc to create an ad hoc network and to allow devices to send and receive data directly a WLAN access point device is not needed In an ad hoc network all devices must use the same WLAN network name e WLAN security mode Select the encryption used WEP 802 1x or WPA WPAZ 802 1x and WPA WPA2 are not available for ad hoc networks If you select Open network no encryption is used The WEP 802 1x and WPA functions can be used only if the network supports them e Use access point Select After confirmation to set the device to ask for confirmation before the connection using this access point is created or Automatically to set the device to connect to the destination using this access point automatically To enter the settings for the selected security mode select WLAN security settings Advanced WLAN settings Select Options gt Advanced settings and from the following e IPv4 settings Enter the IP address o
224. subject 4 Enter the start and end times and dates or select All day event 5 Enter the location 6 Set an alarm for the entry if needed 7 For a recurring meeting set the recurrence time and enter the end date 8 Enter a description To set the priority for the meeting request select Options gt Priority To send the meeting request select Options gt Send f Fawn oe i a Anne Ki AHAA E I f Y ayn se E g ip tava ig A ii gt EJ 1 Wl T YAY A SGA Fe M M SLAA SA wet WwW Select Menu gt Calendar You can switch between the following views Month view shows the current month and the calendar entries of the selected day in a list e Week view shows the events for the selected week in seven day boxes e Day view shows the events for the selected day grouped into time slots according to their starting time e To do view shows all to do items e Agenda view shows the events for the selected day in a list Tip To switch between views press To change the view select Options gt Change view and the desired view Tip To open the week view select the week number To move to the next or the previous day in month week day and agenda view select the desired day To change the default view select Options gt Settings gt Default view Contacts Select Menu gt Contacts About Contacts Select Menu gt Contacts With Contacts you can save and update c
225. switch the device off press and hold the power key 1 Light sensor 2 Earpiece 3 Navi key hereafter referred to as scroll key Press the scroll key to make a selection or to scroll left right up or down on the display Press and hold the scroll key to accelerate the scrolling 4 Home key 5 Selection key Press the selection key to perform the function displayed above it 6 Call key 7 Calendar key 8 Charger connector 9 E mail key 10 Power End key Press and hold the key to switch the device on or off During a call press the end key to reject a call or end active and held calls or press and hold to end data connections 11 Selection key 12 Backspace key Press the key to delete items 13 Secondary camera 14 Headset connector 1 fa l 2 et 4 Tt 1 Mirror 2 Flash 3 Main camera 4 Loudspeaker 1 Micro USB connector 2 Memory card slot 3 Volume up Zoom in key 4 Mute Push to talk key 5 Volume down Zoom out key 6 Capture key a i fn hr y fal 4 la g a B LIEGI Ke WSs ee Ville With One touch keys you can access applications and tasks quickly To change the assigned application or task select Menu gt Control panel gt Settings and General gt Personalisation gt One touch keys Your service provider may have as
226. t See All Games The store is updated automatically when you are connected to the internet To update it manually select Options gt Update Now To view details of a game select View Details The about tab contains a description of the game and pricing information The media tab contains screen 117 Media 118 shots and video clips of the game The review tab contains reviews and ratings To try out a game select Options gt Download Free Trial To purchase a game select the buying option from within the game You can also download and purchase games with a compatible PC at www n gage com To cancel the download of a game open the games tab and select the download and Options gt Cancel Download Purchase games Select Menu gt Applications gt Media gt N Gage To purchase a game do the following 1 Open the store tab select a game and Purchase Now 2 Enter your credit card details and personal information Make sure you enter a valid e mail address because the receipt is sent to you by e mail and the receipt contains the game activation code 3 Read and accept the terms and conditions and check that your billing details are correct 4 Select Purchase The licences for games that you purchase are linked to your device Create a player name Select Menu gt Applications gt Media gt N Gage When you start the N Gage application and connect to the N Gage service for the first time you
227. t facilitate phone calls over an IP network such as the internet Virtual private network VPN creates a secure connection to compatible corporate intranet and services such as e mail Wireless application protocol WAP is an international standard for wireless communication Wired equivalent privacy WEP is an encryption method that encrypts data before itis transmitted in WLAN Wireless local area network Glossary 159 WPA Wi Fi Protected Access Security method for WLAN Glossary WPA2 Wi Fi Protected Access 2 Security method for WLAN 160 To view frequently asked questions about your device see the product support pages at the Nokia website Q What is my lock PIN or PUK code A The default lock code is 12345 If you forget the lock code contact your device dealer If you forget a PIN or PUK code or if you have not received such a code contact your network service provider Q How do I close an application that is not responding A Press and hold the home key Scroll to the application and press the backspace key to close the application Q Why do images look smudgy A Ensure that the camera lens protection windows are clean Q Why do missing discoloured or bright dots appear on the screen every time I switch on my device A This is a characteristic of this type of display Some displays may contain pixels or dots that remain on or off This is norm
228. t for delivery and read reports of sent messages network service Receiving a delivery report of a multimedia message that has been sent to an e mail address may not be possible e Deny report sending Select Yes to not send delivery reports from your device for received multimedia messages e Message validity Select how long the messaging centre tries to send the message network service If the recipient of a message cannot be reached within the validity period the message is removed from the multimedia messaging centre Maximum time is the maximum amount of time allowed by the network The device requires network support to indicate that a sent message has been received or read Depending on Messaging 53 Messaging 54 the network and other circumstances this information may not always be reliable E mail account settings SelectMenu gt Messaging and Options gt Settings gt E mail If you try to edit mailbox settings but have not yet set up an e mail account the E mail wizard opens and helps you set up your e mail account If you have defined a mailbox to edit the settings select the mailbox The settings available for editing may vary Some settings may be preset by your service provider Connection settings SelectMenu gt Messaging and Options gt Settings gt E mail To define the connection settings select an e mail account and Options gt Edit gt Mailbox settings To edit the s
229. t for the credentials To use a VPN connection in an application the application must be associated with a VPN access point Tip You can configure the application s connection setting to Always ask in which case you select the VPN access point from a list of connections when a connection is established 1 Inthe application in which you want to create a VPN connection select a VPN access point as the access point 2 If you are using legacy authentication enter your VPN user name and passcode or password If the SecurID token has become out of synchronisation with the clock of the ACE Server enter the next passcode If you are using certificate based authentication you may have to enter the key store password Security and data management 139 Settings 140 Settings Select Menu gt Control panel gt Settings You can define and modify various settings of your device Modifying these settings affects the operation of your device across several applications Some settings may be preset for the device or sent to you in a special message by your service provider You may not be able to change such settings Select the setting you want to edit to do the following e Switch between two values such as on or off e Select a value from a list e Open a text editor to enter a value e Open aslider and scroll left or right to adjust a value General settings Select Menu gt Control panel gt Settings and G
230. t have an internet access point defined in the device to retrieve assistance data from the Nokia A GPS service over a packet data connection The access point for A GPS can be defined in positioning settings A wireless LAN WLAN access point cannot be used for this service Only a packet data internet access point can be used Your device asks you to select the internet access point when GPS is used for the first time A LE PA UIAF aN ALITOA CRaKMKALCTIIV wepe n MED te VW E CEED eh i Wi i ww EWU W Wy VUE A Weri_rt UW i SS amp amp Zd 4 When using the GPS receiver ensure you do not cover the antenna with your hand Establishing a GPS connection may take from a couple of seconds to several minutes Establishing a GPS connection in a vehicle may take longer The GPS receiver draws its power from the device battery Using the GPS receiver may drain the battery faster If your ie cannot find the satellite signal consider the following Ifyou are indoors go outdoors to receive a better signal e Ifyou are outdoors move to a more open space e Ensure that your hand does not cover the GPS antenna of your device If the weather conditions are bad the signal strength may be affected e Some vehicles have tinted athermic windows which may block the satellite signals Check satellite signal status To check how many satellites your device has found and whether your device is r
231. tain style 99 or environment Media 100 To change the scene select Scene modes from the toolbar To make your own scene scroll to User defined and select Options gt Change To copy the settings of another scene select Based on scene mode and the desired scene To activate your own scene select User defined gt Select Capture imagesina sequence Select Menu gt Applications gt Media gt Camera To capture several images in a sequence if enough memory is available select Sequence mode from the toolbar and press the capture key The captured images are shown in a grid on the display To view an image scroll to it and press the scroll key If you used a time interval only the last image is shown on the display and the other images are available in Gallery To send the image select Options gt Send To send the image to a caller during an active call select Options gt Send to caller To deactivate sequence mode select Sequence mode gt Single shot in the toolbar View captured image Select Menu gt Applications gt Media gt Camera The image you captured is automatically saved in Gallery If you do not want to keep the image select Delete from the toolbar Select from the following toolbar items e Send Send the image to compatible devices e Send to caller Send the image to the caller during an active call e Post to Send the image to your compatible online album
232. tart a new conversation To start a new IM conversation in the application main view scroll to an IM contact list If the list is closed press the scroll key to expand it to show the contacts in the list Scroll to the desired contact in the contact list An icon indicates the availability of the contact To start a conversation with the contact press the scroll key When you have selected a contact the conversation view will open with the editor box in focus and you can start to type your message in the editor box View and start conversations Under the Conversations heading you can see a list of the contacts with whom you have an ongoing conversation Ongoing conversations are automatically closed when you exit IM To view a conversation scroll to a participant and press the scroll key To continue the conversation when you are viewing it write your message and press the scroll key To return to the conversations list without closing the conversation select Back To close the conversation select Options gt End conversation To start a new conversation select Options gt New conversation Change your own status To change your own IM status that is seen by other IM users in the application main view scroll to the first item To select a new status press the scroll key Scroll to the new status and press the scroll key Modify your personal IM preferences Select Options gt Settings gt Prefer
233. tempts if the device does not receive a receiving acknowledgement signal from the network e Short retry limit Enter the maximum number of transmission attempts if the device does not receive a clear to send signal from the network e RTS threshold Select the data packet size at which the WLAN access point device issues a request to send before sending the packet e TX power level Select the power level of your device when sending data Settings 149 Settings 150 Radio measurements Enable or disable the radio measurements Power saving Select whether to use the WLAN power saving mechanism to save the power in the device battery Using the power saving mechanism enhances the battery performance but may weaken WLAN interoperability To restore all settings to their original values select Options gt Restore defaults WLAN security settings Select Menu gt Control panel gt Settings and Connection gt Destinations gt Access point and follow the instructions on the display To edit a wireless LAN WLAN access point open one of the access point groups and select an access point marked with 69 To enter the settings for the selected security mode select WLAN security settings WEP security settings Select WEP as the WLAN security mode The wired equivalent privacy WEP encryption method encrypts data before it is transmitted Access to the network is denied to users who do not have th
234. tent e Security module Manage your security module Avoid using codes that are similar to emergency numbers to prevent accidental dialling of the emergency number Codes are shown as asterisks When you change a code enter the current code then the new code twice Device and SIM card security To change the PIN code select Phone and SIM card gt PIN code The new code must be 4 to 8 digits long The PIN code protects your SIM card against unauthorised use and is provided with the SIM card After three consecutive incorrect PIN code entries the code is blocked and you need to use the PUK code to unblock it before you can use the SIM card again To set the keypad to lock automatically after a defined period select Phone and SIM card gt Keypad autolock period To set a time out after which the device is automatically locked and can be used only if the correct lock code is entered select Phone and SIM card gt Phone autolock period Enter a number for the time out in minutes or select None to set off the autolock period When the device is locked you can still answer incoming calls and calls may still be possible to the official emergency number programmed into your device To set a new lock code select Phone and SIM card gt Lock code The preset lock code is 12345 Enter the current code and then the new code twice The new code can be 4 255 characters long Both alphabets and digits can be used and both upperc
235. ter you want to access with Ovi Files You can try out Ovi Files for a limited trial period With Ovi Files you can e Browse search and view your images You do not need to upload the images to the website but you can access your computer content with your mobile device e Browse search and view your files and documents e Transfer songs from your computer to your device e Send files and folders from your computer without moving them to and from your device first e Access files on your computer even when your computer is switched off Just choose which folders and files you want to be available and Ovi Files automatically keeps an up to date copy stored ina protected online storage for access even when your computer is switched off For support see files ovi com support In Ovi Store you can download mobile games applications videos images and ringing tones to your device Some of the items are free of charge others you need to purchase using your credit card or through your phone bill Ovi Store offers you content that is compatible with your mobile device and relevant to your tastes and location This service may not be available in all countries and regions The content in Ovi Store is sorted into the following categories e Recommended e Games Personalisation New from Nokia Eseries 39 New from Nokia Eseries 40 Applications Audio amp video Select Menu gt Messaging In Messag
236. tions GPS signals may not be available inside buildings or underground and may be impaired by materials such as concrete and metal GPS should not be used for precise location measurement and you should never rely solely on location data from the GPS receiver and cellular radio networks for positioning or navigation The trip meter has limited accuracy and rounding errors may occur Accuracy can also be affected by availability and quality of GPS signals Different positioning methods can be enabled or disabled in positioning settings Your device also supports assisted GPS A GPS A GPS is requires network support Assisted GPS A GPS is used to retrieve assistance data over a packet data connection which assists in calculating the coordinates of your current location when your device is receiving signals from satellites When you activate A GPS your device receives useful satellite information from an assistance data server over the cellular network With the help of assisted data your device can obtain the GPS position faster Your device is preconfigured to use the Nokia A GPS service if no service provider specific A GPS settings are available The assistance data is retrieved from the Nokia A GPS service server only when needed To disable the A GPS service select Menu gt Applications gt GPS gt GPS data and Options gt Positioning settings gt Positioning methods gt Assisted GPS gt Disable You mus
237. tions updates and synchronisations and other VPN connections select VPN gt VPN log DAI Select Menu gt Control panel gt Settings and Connection gt Destinations An access point is where your phone connects to the network To use e mail and multimedia services or to browse web pages you must first define internet access points for these services Virtual private network VPN access points pair VPN policies with regular internet access points to create secure connections Your service provider may preset some or all access points for your device and you may not be able to create edit or remove them Select a destination and Options gt Edit and define the following e Connection name Enter a name for the VPN access point e VPN policy Select the VPN policy to combine with the internet access point e Internet access point Select the internet access point with which to combine the VPN policy to create secure connections for data transfer e Proxy server address Enter the proxy server address of the private network e Proxy port number Enter the proxy port number e Use access point Select whether connections using this access point are established automatically The settings available for editing may vary For the correct settings contact your company s IT department You may have to prove your identity when you log on to the enterprise network Contact your company s IT departmen
238. to show you PTT address to the other parties of the call You may not be able to select some of the options Log ve Select Menu gt Log The Log application stores information about the communication history of the device The device registers missed and received calls only if the network supports these functions and if the device is switched on and within the network service area Phone T1 Phone 12 Call and data registers Select Menu gt Log To view recently missed received and dialled calls select Recent calls Tip To view the dialled numbers when in the home screen press the call key To view the approximate duration of calls to and from your device select Call duration To view the amount of data transferred during packet data connections select Packet data Monitor all communications Select Menu gt Log To monitor all voice calls text messages or data connections registered by the device open the general log tab E gt To view detailed information about a communication event select the event Tip Subevents such as sending a text message in more than one part or opening a packet data connection are logged as one communication event Connections to your mailbox multimedia messaging centre or web pages are shown as packet data connections To add the phone number from a communication event to Contacts select Options gt Save to Contacts and create a new contact or add the
239. tones 141 phone setup 24 PIN code changing 143 playing messages 4 video and audio 113 podcasting 109 directories 109 searching 110 settings 110 positioning settings 143 positioning information 80 predictive textinput 27 141 presentations 50 printer settings 95 printing 94 ofiles creating 29 customising 29 personalising 30 selecting ringing tones 29 proxy settings 148 PTT See push to talk Push to talk creating achannel 70 pushtotalk 68 answering a PTT call 69 callback requests 69 channels 69 logging in and exiting 68 making a group call 69 making a one to one call 69 network groups 70 responding to a channel invitation 71 Settings 71 talking to a channel 70 viewing the log 71 Quickoffice 93 radio 114 listening 114 settings 115 stations 115 RealPlayer playing media clips 113 settings 113 viewing clip details 113 remote configuration 20 remote database search 38 remote lock 130 restoring original settings 143 ringing tones 141 3 D 32 contacts 38 in profiles 29 vibrating alert 141 saving files 28 settings 28 screen saver 31 140 scroll key 141 search settings 27 searching 27 available WLANs 129 contacts 38 security Bluetooth 126 device and SIM card 143 memory card 130 web browser 76 security code 130 security module 133 sending files 28 using Bluetooth 123 sensor settings 142 service commands 51 service messages 51 settings 54 settings access points 146 147 accessori
240. tries or regions but allow calls to your home country e Incoming calls Prevent incoming calls e Incoming calls when roaming Prevent incoming calls when outside your home country To check the status of voice call barrings select the barring option and Options gt Check status To stop all voice call barrings select a barring option and Options gt Deactivate all barrings To change the password used for barring voice fax and data calls select Options gt Edit barring password Enter the current code then the new code twice The barring password must be four digits long For details contact your service provider 65 Phone 66 Bar net calls Select Menu gt Control panel gt Settings and Phone gt Call barring gt Internet call barring To reject net calls from anonymous callers select Anonymous call barring gt On Send DTMF tones You can send dual tone multifrequency DTMF tones during an active call to control your voice mailbox or other automated phone services Send a DTMF tone sequence 1 Make a call and wait until the recipient answers 2 Select Options gt Send DTMF 3 Enter the DTMF tone sequence or select a predefined sequence ei a DTMF tone sequence to a contact Car 1 Select Menu gt Contacts Select a contact and Options gt Edit gt Options gt Add detail gt DTMF 2 Enter the tone sequence To insert a pause of about 2 seconds before or between DTMF tones
241. ts Reset voice recognition learning when the main user of the device has changed N 5 z i a yo E Sa y y s 2 R g d Ti i EON e f ON f a ee Some features may not be available in your region For availability contact your service provider Select Menu gt Applications gt PTT About push to talk Push to talk PTT network service is a real time voice over IP service that uses the cellular network PTT provides direct voice communication with the push of a key Use PTT to have a conversation with one person or with a group of people Before you can use PTT you must define the PTT settings access point PTT SIP XDM and Presence You may receive the settings in a special text message from the service provider that offers the PTT service You can also use the Settings wizard application to configure PTT if supported by your service provider For more information on the PTT application see the user guide for your device or your local Nokia website In PTT communication one person talks while the others listen through the built in loudspeaker Speakers take turns responding to each other Because only one group member can talk at any time the maximum duration of a speech turn is limited The maximum duration is usually set to 30 seconds For details of the speech turn duration for your network contact your service provider Phone calls always take priority over push to talk
242. ttings from your service provider ina configuration message or use the Settings wizard application Text message settings Select Menu gt Messaging and Options gt Settings gt Text message Select from the following e Message centres View the available message centres for your device or add a new one e Message centre in use Select a message centre to send the message e Character encoding Select Reduced support to use automatic character conversion to another encoding system when available e Receive report Select Yes if you want the network to send you delivery reports on your messages network service e Message validity Select how long the message centre resends your message if the first attempt fails network service If the recipient cannot be reached within the validity period the message is deleted from the message centre e Message sent as Convert the message to another format for example fax or e mail Change this option only if you are sure that your message gt centre is able to convert text messages into these other formats For more information contact your service provider Preferred connection Select the preferred method of connection when sending text messages from your device Reply via same centre Select whether you want the reply message to be sent using the same text message centre number network service a Select Menu gt Messaging and Opt
243. udio message to reply with an audio message or Via e mail to reply with an e mail message E mail message is available only if a mailbox is configured and the message is sent from an e mail address Tip To add recipients to your reply select Options gt Add recipient to select the recipients of the message from Contacts or enter the recipients phone numbers or e mail addresses manually in the To field 3 Enter the text of the message and select Options gt Send Create presentations Select Menu gt Messaging Creating multimedia presentations is not possible if MMS creation mode is set to Restricted To change the setting select Options gt Settings gt Multimedia message gt MMS creation mode gt Free or Guided 1 To create a presentation select New message gt Message The message type is changed to multimedia message based on the inserted content 2 Inthe To field enter a recipient s number or e mail address or press the scroll key to add a recipient from the contacts list If you enter more than one number or e mail address separate them with a semicolon 3 Select Options gt Insert content gt Insert presentation and a presentation template A template may define which media objects you can include in the presentation where they appear and which effects are displayed between images and Slides 4 Scroll to the text area and enter the text 5 To insert images sound or video clips or
244. various applications provided by Nokia and different third party software developers that help you do more with your device These applications are explained in the guides that are available on the product support pages at www nokia com support or your local Nokia website Your device normally has MMS GPRS streaming and mobile internet settings automatically configured based on your network service provider information You may have settings from your service providers already installed in your device or you may receive or request the settings from the network service providers as a special message You can change the general settings in your device such as language standby mode display and keypad lock settings To view how much memory is available for different data types select Menu gt Office gt File mgr Many features of the device use memory to store data The device notifies you if available memory is low To free memory transfer data to an alternative memory if available or compatible computer To remove data you no longer need use File manager or the respective application You can remove the following Messages in the folders in Messaging and retrieved e mail messages from the mailbox Saved web pages Contact information Calendar notes Applications shown in Application manager that you do not need Installation files with sis or sisx file extensions of installed applications Back up the install
245. venes 8 Quick start QUIE ccccccccccccccccccccccscccces 9 SIM card battery charging memory card 00000000 9 First start UDa aea a aaan a 11 keys and Dar S nenene 12 LOCK TREKY Sn n a 14 ACCESSOTTO Sasiia a A 15 Home See a 15 NO Ke SWIC a E E 16 Set up your C Mail cece cestccssteccscssteescsseeessssseeeees 17 ANENA S er ctdscopecuns cs shcoasetanaess eaeasenes 18 N kia PESUITE siensa Neee EE EEE 18 Tips for efficient USC cc cectecccscssstecceesesescssecesees 19 Find helD siennas aa aa 20 SUP DOU EEA EE A E EE EEE E 20 Remote CONFIGUIATION ccc cccccsssetcccsssssseecsssesseees 20 Software Updates USING your PC eee seeeeeeeeee 21 IN G VIGE Nema a ia 22 Additional applications ee cessccccccsssssetecsesssseees 22 SELIG Si enan usta cuseccaunsucsesumecasssnsocunwermactes 22 Free memon oosa does aerar eere vasycasssmcorevewes OEE SES Eoi 22 Nokia E75 The DAaSICS cccccccsccscccscccccees 24 Phone setU Dosie EER 24 Settings wizard eeeeesseeeeessseesessseesessseeesssseessssssessss 24 AE DN E EE EEN RE E 24 Display indicator S seissirisiserosisrissrisisiiriiariisriiieiiireri 25 Wre TEE aana R E EO 26 SEION ONN 27 Common actions in several applications 28 Volume CONTKOL cece tcccccsttccccssseccscsssecssssssecsessseeees 28 PErSONALISATION ccccccccscccccccccccccccscccccecs 29 Prone S ennaa a EA 29 Select ringing tOneS oeeeeeneeoesses
246. vice event Enter the desired text and select OK This option is not available if you have selected Say caller s name in Profiles Select an event group such as Messaging events Select the desired event Options and from the following e Play Play the sound before activating it Personalisation 31 Personalisation 32 e Activate sounds Activate all the sounds in the event group e Deactivate sounds Deactivate all the sounds in the event group 3 D ringing tones J Select Menu gt Control panel gt 3 D tones To enable three dimensional 3 D sound effects for ringing tones select 3 D ringing tone effects gt On Not all ringing tones support 3 D effects To change the 3 D effect that is applied to the ringing tone select Sound trajectory and the desired effect To modify the 3 D effect select from the following e Trajectory speed Select the speed at which sound moves from one direction to another This setting is not available for all effects e Reverberation Select the desired effect to adjust the amount of echo e Doppler effect Select On to set the ringing tone sound higher when you are closer to your device and lower when you are farther away This setting is not available for all effects To listen to the ringing tone with the 3 D effect select Options gt Play tone To adjust the volume of the ringing tone select Menu gt Control panel gt Profiles and Options gt
247. vourite visible under the Conversations heading e New search To start a new search with different criteria The available options will vary depending on the IM server IM groups To join an IM group saved under the Conversations heading scroll to the group you want to join and press the scroll key After you join an IM group you can view the messages that are exchanged there and send your own messages To send a message write the message in the editing box at the bottom of the screen and press the scroll key To send a private message to a participant select Options gt Send private message To reply to a private message sent to you select the message and Options gt Reply To invite IM contacts who are online to join the IM group select Options gt Send invitation To prevent receiving messages from certain participants select Back gt Options gt Blocking options To leave the IM group select Options gt Leave IM group IM server settings Select Options gt Settings The settings may be preconfigured in your device or you may receive the settings as a confirmation message from the service provider that offers the IM service You obtain the user ID and password from your service provider when you register to the service If you do not know your user ID and password contact your service provider The following settings are available e Preferences Modify your IM settings e Servers
248. w GPRS Video centre will display only the video clips which are usage r device i inia Orm at SUPDOn ed DY VOUN AENIEE To set roaming on or off select Allow roaming 1 To view your device on a PC as a mass me MOLy e Parental contro Set an age limit to videos The device where you can transfer any data files make required password is the same as the device lock the connection with a USB data cable code The factory setting for the lock code is 2 Select Mass storage as the connection mode A 12345 In video on demand services videos which compatible memory card needs to be inserted in have the same or a higher age limit than you have the device set are hidden 108 e Preferred memory Select whether downloaded videos are saved in the device memory or ona compatible memory card e Thumbnails Select whether to download and view thumbnail images in video feeds Nokia Podcasting Select Menu gt Applications gt Media gt Podcasting Download podcasts to your device and play them Play and manage podcasts Podcasting delivers audio or video content over the internet for playback on mobile devices and PCs With the Nokia Podcasting application you can search discover subscribe and download podcasts over the air and play manage and share podcasts with your device Define the connection and downloading settings before using the application Select Options gt Settings gt Connection and Download
249. w to use your product or you are unsure how your device should function see the support pages at www nokia com support or your local Nokia website www nokia mobi support with a mobile device the Help application in the device or the user guide If this does not resolve your issue do one of the following e Restart the device switch off the device and remove the battery After about a minute replace the battery and switch on the device e Restore the original factory settings as explained in the user guide Your documents and files will be deleted in the reset so back up your data first e Update your device software regularly for optimum performance and possible new features as explained in the user guide If your issue remains unsolved contact Nokia for repair options See www nokia com repair Before sending your device for repair always back up the data in your device Select Menu gt Control panel gt Phone gt Device mor With Device manager you can manage settings data and software on your device remotely You can connect to a server and receive configuration settings for your device You may receive server profiles and different configuration settings from your service providers or company information management department Configuration settings may include connection and other settings used by different applications in your device The available options may vary The remote configuration conn
250. want to send channel invitations Channel invitations are text messages alk to a channel or group To talk to a channel after you log in to the PTT service press the PTT key A tone sounds indicating that access is granted Continue to press and hold the PTT key the entire time you are talking When you finish talking release the key If you try to respond to a channel by pressing the PTT key while another member is talking Wait is displayed Release the PTT key wait for the other person to finish talking and press the PTT key again Alternatively press and hold the PTT key and wait for Talk to be displayed When you are talking in a channel the first person to press the PTT key when someone stops talking can talk next To view the currently active members of a channel during an active call to the channel select Options gt Active members When you have finished the PTT call select Disconnect To invite new members to an active call select the channel when you are connected to it Select Options gt Send invitation to open the invitation view You can only invite new members when you are the host of a private channel or when the channel is a public channel Channel invitations are text messages You can also advertise your channel so that others may become aware of it and then join Select Options gt Send invitation and enter the required information Respond to a channel invitation To save a received cha
251. ynchronise data between the devices Your device notifies you if the other device is not compatible If the other device cannot be switched on without a SIM card you can insert your SIM card in it When your device is switched on without a SIM card the Offline profile is automatically activated and transfer can be done Transfer content for the first time 1 To retrieve data from the other device for the first time on your device select Switch in the Phone setup application or select Menu gt Control panel gt Switch 2 Select the connection type you want to use to transfer the data Both devices must support the selected connection type 3 If you select Bluetooth connectivity as the connection type connect the two devices To have your device search for devices with Bluetooth connectivity select Continue Select the device from which you want to transfer content You are asked to enter a code on your device Enter a code 1 16 digits and select OK Enter the same code on the other device and select OK The devices are now paired Some earlier Nokia devices may not have the Switch application In this case the Switch application is sent to the other device as a message To install the Switch application on the other device open the message and follow the instructions on the display 4 On your device select the content you want to transfer from the other device When the transfer has started you can cancel
252. you have selected Network authentication to be used To connect to the server and receive configuration settings for your device select Options gt Start configuration To view the configuration log of the selected profile select Options gt View log To update the device software over the air select Options gt Check for updates The update does not erase your settings When you receive the update package on your device follow the instructions on the display Your device is restarted once the installation is complete Downloading software updates may involve the transmission of large amounts of data network service Make sure that the device battery has enough power or connect the charger before starting the update Ed waring If you install a software update you cannot use the device even to make emergency calls until the installation is completed and the device is restarted Be sure to back up data before accepting installation of an update Software updates may include new features and enhanced functions that were not available at the time of purchase of your device Updating the software may also improve the device performance Nokia Software Updater is a PC application that enables you to update your device software To update your device software you need a compatible PC broadband internet access and a compatible USB data cable to connect your device to the PC To get more information to check the release
253. you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner Select Menu gt Web and Options gt Settings Select from the following General settings e Access point Change the default access point Some or all access points may be preset for your device by your service provider you may not be able to change create edit or remove them e Homepage Define the homepage e Minimap Activate the mini map e History list While browsing show the page history of the current browsing session when you select Back e Security warnings Show or hide security notifications e Java ECMA script Enable or disable the use of scripts e Open while downloading Automatically open files you download Page settings e Load content Select whether you want to load images and other objects while browsing If you select Text only to load images or objects later during browsing select Options gt Tools gt Load images e Selection keys Show the selection keys e Default encoding If text characters are not shown correctly you can select another encoding according to the language of the current page e Block pop ups Allow or block automatic opening of pop ups while browsing e Automatic reload Automatically update the web pages you browse e Automatic find Activate the automatic find e Fontsize Define the font siz
254. your device to certain phone numbers Not all SIM cards support the fixed dialling service For more information contact your service provider Security and data management 131 Security and data management 132 When security features that restrict calls are in use such as call barring closed user group and fixed dialling calls may be possible to the official emergency number programmed into your device Call barring and call diverting cannot be active at the same time You need your PIN2 code to activate and deactivate fixed dialling or edit your fixed dialling contacts Contact your service provider for your PIN2 code Select Options and from the following Activate fixed dialling Activate the fixed dialing e Deactivate fixed dialling Deactivate the fixed dialing e New SIM contact Enter the contact name and phone number to which calls are allowed e Add from Contacts Copy a contact from the list of contacts to the fixed dialling list To send text messages to the SIM contacts while the fixed dialling service is active you need to add the text message centre number to the fixed dialling list gm n gm 7 a na ma a g a a u Be a Aa Ze a i j i i i ha j a 2 a _ i au l h i l w es at Ta ket he Shee LI Gru n Select Menu gt Control panel gt Settings and General gt Security gt Certificate management Digital certificates are used to veri
255. your trip select Stop navigation Pata tweattrea raw ve position information Select M Menu gt Aiai gt GPS gt GPS data and Position In the position view you can view the position information of your current location An estimate of the accuracy of the location is displayed To save your current location as a landmark select Options gt Save position Landmarks are saved locations with more information and they can be used in other compatible applications and transferred between compatible devices Trip meter Select Menu gt Applications gt GPS gt GPS data and Trip distance The trip meter has limited accuracy and rounding errors may occur Accuracy can also be affected by availability and quality of GPS signals To turn trip distance calculation on or off select Options gt Start or Stop The calculated values remain on the display Use this feature outdoors to receive a better GPS signal To set the trip distance and time and average and maximum speeds to zero and to start a new calculation select Options gt Reset To set the trip meter and total time to zero select Restart La E me A a gt a g LY J sw Va g ap a z 6 F l wn a il Select Menu gt Applications gt GPS gt Maps With Maps you can see your current location on the map browse maps for different cities and countries search for addresses and different points of interest plan routes from one location to an

Nokia E75 User Guide

Contents

Download Pdf Manuals

Related Search

Related Contents