Instruction Manual
Contents
1. IMPORTANT When using cleaning tools the cleaner must be kept in the upright position and held Using your 3 in1 tool The 3 in1 tool Fig 9 is composed of e Crevice tool to clean corners and hard to reach areas e Furniture nozzle to clean curtains and soft furnishings Dusting brush attachment with bristles to clean delicate surfaces The 3 in1 tool can be used directly on the flexi tube or combined with the additional exten sion tube Assembly the dust bin Fig 10 Dust bin to be put in the location e To rotate the dust bin and lock into main body CLEANER MAINTENANCE Emptying the Dust Container Fig 11 1 Slide the bin release button downward and remove the dust bin from the cleaner 2 Hold the container using the bin handle and pull the bin emptying latch The dust container door will automatically open 3 Once empty gently tap or shake the container to release any excess dust IMPORTANT Do not fill above the max level mark shown on the bin Allergy and asthma sufferers When emptying any vacuum cleaner it is difficult to avoid exposure to dust To minimize this risk please follow these instructions 1 wrap the lower bin in a plastic bag and close the bag tightly around the dust container before emptying 2 Pull the bin emptying latch to empty the dust into the plastic bag Close the bag quickly and dispose of it immediately Fig 12 Cleaning the washable filters Fig 13 1 Slide the bin release butt2. NZ ISS IN e S l HOOVER e as GENERATION FUTURE USER MANUAL PRINTED IN P R C GENERATION FUTURE 48011868 01 Certain models only Certain models only nozzles may vary according to model 7 ae Certain models only Certain models only nozzles may vary according to model INSTRUCTIONS FOR SAFE USE This appliance should only be used for domestic cleaning as described in this user guide Please ensure that this guide is fully understood before operating the appliance Do not leave the appliance plugged in Always switch off and remove the plug from the socket after use or before cleaning the appliance or any maintenance task This appliance can be used by children aged from 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved Children shall not play with the appliance Cleaning and user maintenance shall not be made by children without supervision If the power cord is damaged stop using the appliance immediately To avoid a safety hazard an authorised HOOVER service engineer must replace the power cord Keep hands feet loose clothing and hair away from rotating brushes Use only atta
3. chments consumables or spares recommended or supplied by HOOVER Static electricity Some carpets can cause a small build up of static electricity Any static discharge is not hazardous to health Do not use your appliance out of doors or on any wet surface or for wet pick up Do not pick up hard or sharp objects matches hot ashes cigarette ends or other similar items Do not spray with or pick up flammable liquids cleaning fluids aerosols or their vapours Do not run over the power cord when using your appliance or remove the plug by pulling on the power cord Do not continue to use your appliance if it appears faulty HOOVER service To ensure the continued safe and efficient operation of this appliance we recommend that any servicing or repairs are only carried out by an authorised HOOVER service engineer Do not stand on or wrap the cord around arms or legs when using your appliance Do not use the appliance to clean animals or people Do not position the appliance above you when cleaning the stairs The Environment The symbol on this appliance indicates that this appliance may not be treated as household waste Instead it must be handed over to the applicable collection point for the recycling of electrical and electronic equipment Disposal must be carried out in accordance with local environmental regulations for waste disposal For more detailed information about treatment recovery and recycling of this app
4. ct from HOOVER When ordering parts always quote your model number HEPA Foam filter pack S100 35601367 Hard Floor Nozzle G216EE 35601609 e Carpet Nozzle G215EE 35601608 e Mini Turbo Nozzle e Parquet Nozzle e Multi function tool J45 35601003 G87 PC 35600655 MFT2 35601366 HOOVER Service Should you require service at any time please contact your local HOOVER Service Office Tel 08444 995 599 Email customer services hoovercandy com Quality HOOVER s factories have been independently assessed for quality Our products are made using a quality system which meets the requirements of ISO 9001 Your Guarantee The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased The bill of sale or receipt must be produced when making any claim under the terms of this guarantee Subject to change without notice
5. dle Fig 2a and fix in position with the supplied screw Fig 2b 3 Secure the 3 in 1 tool to the rear of the cleaner handle Fig 2c 4 Secure the nozzle to the product Fig 2d For models equipped with mini turbo nozzle 1 The mini turbo nozzle can be connected directly to the flexi tube handle Fig 3a 2 If any blockages are encountered please open the inspection cover Fig 3b 3 Ideal to clean soft furnishings and for the pet hairs removal For models equipped with Multi function tool e The Multi function tool can be inserted directly onto the flexible hose Cord storage To store the cord after cleaning Wrap the cord around the two cord hooks Fig 4 NOTE During cleaning the cord can be clipped in the cord grip on the rear of the handle to avoid any interference while cleaning USING YOUR CLEANER Power switch To switch the cleaner on and off press the power button in the centre of the cleaner Fig 5 Cleaner lock release To start cleaning unlock the cleaner by pressing with your foot the locking pedal on the nozzle Fig 6 Using the flexi tube Remove the flexi tube from the handle location in the cleaner Fig 7 You are immediately ready to use it alone or combined with the accessories as desired 3 in1 tool stored on board Extension tube e Mini turbo nozzle Long crevice tool e Multi function tool The flexi tube gives you the maximum flexibility of usage Fig 8
6. liance please contact your local city office your household and waste disposal service or the shop where you purchased the appliance This appliance complies with the European Directives 2006 95 EC 2004 108 EC and 2011 65 EU HOOVER Limited Pentrebach Merthyr Tydfil Mid Glamorgan CF48 4TU UK GETTING TO KNOW YOUR CLEANER On Off Button Stretch flexi tube Bin release button Bin inlet Bin handle Product neck Cord grip 3in1 tool Ha Crevice Tool Hb Furniture Nozzle Hc Dusting Brush Carry handle Upper cord hook Flexi tube handle Lower cord hook Flexi tube handle location Blockage inspection hose Dust bin Airvolution unit handle Filter pack Filter release latch Airvolution system Bin empting latch Dust container door Hard Floor Nozzle HF V1 Hard Floor Nozzle HF Via Furniture protector V2b Locking pedal V2 Carpet Nozzle CA Parquet nozzle Mini turbo nozzle Multi function tool TA MONP gt lt canyrprozzraSsrT lt xs Za Rigid extension tube Zb Long crevice tool Certain Models Only Certain models only nozzles may vary according to model PREPARING YOUR CLEANER 1 Remove the accessories from the main packaging You should find the following e Cleaner body e Cleaner handle 3 in1 tool e Extension tube Long crevice tool Hard Floor Nozzle Parquet nozzle e Carpet Nozzle e Mini turbo nozzle e Multi function tool 2 Assemble the cleaner han
7. list cleaning tasks and are recommended for oc casional use only It is important to note that this vacuum cleaner is supplied with an Energy Label as required by European Regulation EU 665 2013 If the label shows a red prohibition circle on the left covering the carpet symbol then this indi cates that the vacuum cleaner is not suitable use on carpets If the label shows a red prohibition circle on the right covering the hard floor symbol then this indicates that the vacuum cleaneris not suitable for use on hard floors 1 NOTE Dust pick up ability carpet dust pick up ability hard floor and energy efficiency in accord with Commission Regulations EU 665 2013 and EU 666 2013 USER CHECKLIST Should you have a problem with the product complete this simple user checklist before calling your local HOOVER service e Is there a working electricity supply to the cleaner Check with another electrical product e Is the dust bin full or choked with fine dust To empty the dustbin see Emptying the dust container Is the hose blocked To clear a blockage see Removing a blockage Is there a blockage in the cleaner To clear a blockage see Removing a blockage e Are the filters blocked To clean filters see cleaning the wasable filters IMPORTANT INFORMATION HOOVER spares and Consumables Always replace parts with genuine HOOVER spares These are available from your local HOOVER dealer or dire
8. on downward and remove the dust bin from the cleaner 2 Remove the filter pack by releasing the tab at the rear 3 Separate the GREY foam filter from the DARK GREY HEPA filter pack using the tab provided Gently tap both filters against the side of a bin to release excess dust 4 Wash the GREY foam filter thoroughly under hand warm water until the water runs clean Remove excess water by shaking and leave to dry for 24 hours DO NOT USE HOT WATER Certain Models Only Certain models only nozzles may vary according to model OR DETERGENTS 5 Wash the DARK GREY HEPA filter thoroughly from the inside under hand warm water until the water runs clean Remove excess water by shaking and leave to dry for 24 hours When completely dry reassemble and refit filters to cleaner DO NOT USE HOT WATER OR DETERGENTS IMPORTANT For optimum performance shake off excess dust from the filters regularly We recommend that the GREY foam filter and the DARK GREY HEPA filter are washed every 3 MONTHS NOTE Do not use the cleaner without filters assembled Cleaning the dust bin separation unit 1 Place the bin on a flat surface and remove the filters 2 Remove the Airvolution system by lifting the Airvolution unit handle Fig 14 3 Use a cloth or the dusting brush to remove excessive dust from the Airvolution unit surface 4 Refit the Airvolution unit into the dust bin and refit the filters 5 Refit the dust bin to the cleaner NOTE For s
9. tubborn dirt the Airvolution system can be washed but care must be taken that it is completely dry before refitting to the cleaner IMPORTANT For optimum performance we recommend that Airvolution system is inspected after each empty Removing a blockage 1 check if the dust container is full If so refer to emptying the dust container 2 Ifthe dust container is empty but suction is still low A If cleaning tools were in use check the cleaning tool The mini turbo nozzle can be checked by unlocking the clip and lifting the cover to remove any blockage Fig 3b B check the flexi tube by removing it from the hose handle location stretching it to full length C Check the bin inlet by removing the bin and checking inside the bin inlet D Remove the nozzle and check the nozzle connection E Remove the blockage inspection hose and check from both sides Fig 15 IMPORTANT Switch the cleaner off and remove the plug from the electricity supply before checking cleaner ACCESSORIES AND NOZZLES To obtain the best performance and energy efficiency it is recommended that the correct nozzles are used for the main cleaning operations These nozzles are indicated in the diagrams by the letters GP HF or CA A nozzle type GP can be used to clean both carpet and hard floor A nozzle type HF is suitable for use only on hard floor A nozzle of type CA is suitable for use only on carpet The other nozzles are accessories for specia
Download Pdf Manuals
Related Search