AquaC, Inc.
Contents
1. Ny Remora gua gt 7 Surface Organics Skimmer and Remora Accessory Bubble Eliminator The Surface Organics Skimmer and Bubble Eliminator is a special prefilter box that is designed to increase the performance of your Remora or Remora Pro hang on protein skimmer This prefilter will also help eliminate the unwanted microbubbles that sometimes escape from the skimmer Proteins and organics often accumulate on the upper surface of the aquarium water forming a slick of concentrated waste This prefilter is designed to draw water off the surface of your tank thereby removing these wastes much more efficiently The water return portion can also be used as a media chamber you may place activated carbon or phosphate removing material in this chamber to further cleanse your water Be sure to pack the chamber loosely and keep it clean it is crucial that water be able to flow out the bottom hole of the box rather than over the top edges It is important to keep the prefilter sponge clean and free of debris A clogged sponge will reduce the efficiency of the prefilter and will also contribute to the production of undesirable nitrates and other compounds It will be necessary to clean the sponge routinely and replace it once it becomes clogged INSTALLATION Installation is easy simply slip the prefilter box over the pump and skimmer return ledge The slotted side of the box should fit around the pump while the chamber with the spon2. ge should fit over the return ledge Adjust the height of the prefilter so that only the slotted portion of the box is below the water line approximately 1 2 below the water This will ensure that the surface organics are removed efficiently This level must be adjusted occasionally to compensate for water evaporation or the flow rate through the skimmer do not let the pump run dry You may notice that some water will flow from one chamber to the other this is normal and will help prevent the pump from running dry in the event that the tank level falls below the slots in the top Use the set screw to gently hold the prefilter in place The screw is designed to press against the water pump softly Do not overtighten Water Level Technical Questions Email info proteinskimmer com Chamber Chamber Sponge Aqua Inc 7949 Stromesa Court Ste E San Diego CA 92126 info proteinskimmer com Visit us online at www proteinskimmer com 858 689 1121 phone 858 564 3419 fax
Download Pdf Manuals
Related Search