User manual - produktinfo.conrad.com
Contents
1. N V or their respective owners Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly Care of the environment Environmental information All unnecessary packaging has been omitted We have tried to make the packaging easy to separate into three materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet Your system consists of materials which can be recycled and reused if disassembled by a specialized company Please observe the local regulations regarding the disposal of packaging materials and old equipment amp Your product is designed and manufactured with high quality materials and components which can be recycled and reused X When this crossed out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002 96 EC Please inform yourself about the local separate collection system for electrical and electronic products Please act according to your local rules and do not dispose of your old products with your normal household waste Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health Warranty Never attempt to repair the product this could lead to the risk of injury damage to the product and will void your warranty Use the product and accessories only as intended by the manufac2. and frame rate Deep Color Display colors with more shades and hues when the video content is recorded in Deep Color mode and the TV supports this feature Note If the video resolution is incompatible with your TV you can see a blank screen To recover the display wait for 10 seconds EN 19 6 EasyLink HMP4000 supports Philips EasyLink which uses the HDMI CEC Consumer Electronics Control protocol You can use a single remote control to control EasyLink compliant devices that are connected through HDMI 1 Through HDMI connect HMP4000 to aTV compliant with the HDMI CEC protocol On the TV switch on the functions to allow HDMI CEC operations Consult the user manual of the TV 2 3 On HMP4000 switch on Easy Link 4 On the Home screen select Setup gt Easy Link Select On In Easy Link you can select the following options One Touch Play When you start play on HMP4000 the TV switches to the HDMI input channel automatically One Touch Standby When you switch the TV to the standby mode HMP4000 switches to the standby mode automatically Auto Power On From TV When you switch to the input channel of HMP4000 on the TV HMP4000 can switch on automatically from the standby mode Note Philips does not guarantee 100 interoperability with all HDMI CEC devices 20 EN 7 Update the firmware through a USB storage device Before you update th
3. 1 3 under Copy or move files and folders see Copy or move files and folders on page 15 On the pop up list of options select Delete L gt The selected files or folders are deleted Rename files and folders AWN In Folder select a file or folder in the list of files folders On the remote control press EDIT On the pop up list of options select Rename On the pop up onscreen keyboard edit the file folder name see Enter text on page 11 Create music playlists You can create playlists for music files you want to play together 1 16 In Folder select music files On the remote control press EDIT EN 2 3 4 t gt A list of options is displayed Select Multiple Select t gt A file list is created for you to add files Press A to select a file Press P Il to confirm On the remote control press EDIT On the pop up list of options select Save Playlist Name the playlist as needed L gt A music playlist is created Create photo albums You can create photo albums for picture files 1 AWN In Folder select picture files On the remote control press EDIT t gt A list of options is displayed Select Multiple Select t gt A file list is created for you to add files Press A to select a file Press P HH to confirm On the remote control press EDIT On the pop up list of options select Save Photo Album Name t
4. Always there to Register your product and get support at www philips com welcome Question Contact Philips help you HMP4000 waww User manual PHILIPS Contents 1 Trademark notice 3 2 Safety and notice Safety Compliance Copyright Care of the environment N DDO WwW HR A Warranty 3 Basics Connect Switch on or off Auto standby Screen saver Use the remote control O O O Enter text 4 Play Play from a mass storage device Search for media files Select play options Manage files Copy or move files and folders nu un A A U UWV Delete files and folders EN 1 Rename files and folders 16 Create music playlists 16 Create photo albums 17 Setup 8 System 18 Audio 18 Video 19 EasyLink 20 Update the firmware through a USB storage device 2 Troubleshooting 22 Specification 23 EN 1 Trademark notice Hom HIGH DEFINITION MULTIMEDIA INTERFACE The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries DOLBY DIGITAL Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories dts 2 0 Digital Out Manufactured under license under U S Patent Nos 5 956 674 5 974 380 6 487 535 amp other U S and worldwide patents issued amp pending DTS the Symbol a
5. age files folders underon the connected storage devices e Press EDIT Enter text With the onscreen keyboard use the remote control to enter text ABC abc E Select input modes Press l l on the remote control L gt On the onscreen keyboard current input mode is highlighted ABC English input in the upper case EN 11 abc English input in the lower case E symbols Enter text 1 2 12 On he remote control press M W lt P to move to a key press OK to select the letter or symbol On con E he onscreen keyboard select the input options by using the remote rol gt gt Move the cursor to the left or right lt x Delete the entry before the cursor When the text entry is complete select OK on the onscreen keyboard to exit EN 4 Play On the HDTV enjoy media play from a mass storage device including a USB mass storage device an SD card or an SDHC card Play from a mass storage device 1 Connect your mass storage device to HMP4000 e For a USB mass storage device connect to on HMP4000 e Insert an SD SDHC card to the SD slot tL When the USB device is recognized by HMP4000 changes to on the Home screen L gt When the SD SD HC card is recognized by HMP4000 changes to Mf on the Home screen 2 On the Home screen select or i L gt Media files are sorted as follows Folder Display all the files f
6. ator lights up red Auto standby From the Home screen go to Setup gt System to switch on Automatic Standby If there is no button press or media play on HMP4000 for 15 minutes HMP4000 switches to standby mode automatically Screen saver From the Home screen go to Setup gt System to switch on Screen Saver Delay If there is no button press or media play on HMP4000 for a selected time duration the screen saver is activated To exit the screen saver press any button on the remote control Use the remote control Switch HMP4000 on or to standby mode Press Navigate between screens or through options A e Return to the Home screen A V lt gt S avigate through options OK e Confirm the option o e Back one level or exit View options menu for media play or file navigation Press OPTIONS Control the play Pil Start pause or resume the play 10 EN Stop the play lt gt Skip to the previous next media file lt lt gt gt Search backwards or forwards within current file e Press repeatedly to select a search speed A V e Rotate a photo INFO Display the information about current file during play Press repeatedly to select aspect ratio or zoom in or out To pan through an enlarged photo press AV lt gt SUBTITLE e Access subtitle options Remove the connected USB device safely e Press and hold ll and select the option Man
7. ay all For photo slideshow Slide Timing Set the Slide Transition Set tl Repeat Off Switch o current title the flies he repeat mode display options he repeat mode current file the flies he files in random order ime interval before one slide switches to another he transition mode between two slides f the repeat mode Repeat All Play photos in current folder repeatedly Shuffle Loop Play photos in current folder in random order Background Music P Video Setting Select ay a music file during the slideshow display options Manage files On HMP4000 select or Ml on the Home screen Go to Folder and you can manage files on the co nnected storage devices t mi Folder Copy or move file 1 s and folders In Folder select a file or folder in the list of files folders EN 15 2 3 4 To select multiple files On the remote control press EDIT L gt A list of options is displayed Select Multiple Select t gt A file list is created for you to add files or folders Press A to select a file or folder Press P I to confirm On the remote control press EDIT On the pop up list of options select Copy or Move Select a folder as the destination Press I to confirm L gt The selected files or folders are copied or moved to the destination Delete files and folders 1 2 Follow Step
8. e firmware check current the firmware version of HMP4000 On the Home screen go to Setup gt Software Upgrade gt Version Info 1 On your computer do the following Go to www philips com support to find the latest firmware Search for your model and click on Software and drivers Download the firmware update and save the file to the root directory of a USB storage device On HMP4000 do the following Connect the USB storage device On the Home screen select Setup gt Software Upgrade gt USB upgrade L gt Ifa firmware update is detected you are prompted to start the update Follow onscreen instructions to complete the update t gt When the update is complete HMP4000 switches off automatically and then switches on again Caution Keep HMP4000 powered on and the storage device mounted before the firmware update is complete EN 21 8 Troubleshooting If you contact Philips you will be asked for the model and serial number of this player The model number and serial number are at the bottom of this player Write the numbers here Model No Serial No No picture Refer to the TV user manual for how to select the correct video input channel The contents of the USB storage device cannot be read The format of this USB storage device is not supported The supported memory size is 1TB maximum Make sure that this player supports these files Ref
9. er to Specifications gt Playable media 22 EN 9 Specification Note Specification and design are subject to change without notice Power e Input 100 240V 50 60Hz 15W e Power consumption lt 15 W e Power consumption in standby mode lt 0 5 W Supported formats Video MPEG 1 2 4 MPEG 4 Part 2 H 264 VC 1 WMV9 Xvid MKV RMVB 8 9 10 RM MPG AVI TS M2TS TP IFO ISO VOB DAT MP4 PEG MOV MPEG 4 H 264 ASF FLV 640 x 480 e Audio Dolby digital DTS MPEG Audio AAC RA OGG MKA ADPCM AC3 WMA V9 MP3 PCM LPCM e Picture JPEG JPG BMP PNG GIF unanimated GIF TIF TIFFHD JPEG HDD amp USB support Compatibility Hi Speed USB 2 0 7 TFS FAT 32 FAT EXT 3 HFS e USB MTP support USB PTP support USB MSC support Subtitle support e srt sub smi ssa idx sub Video DMI output 480i 480p 576i 576p 720p 1080i 1080p 1080p24 Composite video output 1Vpp 75 ohm DMI output e Optical output Analog stereo outpu Signal to noise ratio 1 kHz gt 90 dB A weighted Dynamic Range 1 kHz gt 80 dB A weighted e Frequency response 0 2 dB Main Unit Dimensions L xW x H 160 x 91 x 54 1 mm et Weight 0 25 Kg EN 23 Philips Electronics Hong Kong Ltd hereby offers to deliver upon request a copy of the complete corresponding source code for the copyrighted open source software packages used
10. he photo album as needed L gt A photo album is created EN 17 5 Setup You can change the setup options of HMP4000 1 On the Home screen select Setup e If necessary press ff on the remote control to go to the Home screen L gt The setup menu is displayed 2 Press A W lt P to select an option Press OK to confirm the option e Press D to return to the upper level menu System Menu Language Select the language for onscreen menus Subtitle Select the subtitle language for videos Screen Saver Delay Enable the screen saver when HMP4000 is in the idle mode for a selected time span for example in pause or stop mode To exit the screen saver mode press any key Automatic Standby Switch HMP4000 to standby mode when there is no button press or media play on HMP4000 for 15 minutes Request to Resume Play Allow you to select whether to resume video play from the last stop position Reset Factory Defaults Restore factory settings Audio HDMI Audio Mode Select audio output for the HDMI connector Optical output Select audio output for the OPTICAL connector Lip Sync Synchronize audio with video play Video Aspect Ratio Select display aspect ratio TV System Select the video resolution that yourTV supports See your TV manual for details Video Zoom Zoom in or out video scenes 1080P 24Hz Use 1080p 24 Hz for video output where 1080p 24 Hz denotes the resolution
11. in this product for which such offer is requested by the respective licenses This offer is valid up to three years after product purchase to anyone in receipt of this information To obtain source code please contact open source philips com f you prefer not to use email or if you do not receive confirmation receipt within a week after mailing to this email address please write to Open Source Team Philips Intellectual Property amp Standards RO Box 220 5600 AE Eindhoven The etherlands If you do not receive timely confirmation of your letter please email to the email address above PHILIPS Specifications are subject to change without notice 2013 Koninklijke Philips Electronics N V All rights reserved HMP4000_12_UM_V1 1 wk1312 5
12. mp DTS and the Symbol together are registered trademarks amp DTS 2 0 Digital Out is a trademark of DTS Inc Product includes software DTS Inc All Rights Reserved Gal Real RMVB logo is a trademark or a registered trademark of RealNetworks Inc EN 3 2 Safety and notice Read and understand all instructions before you use this product If damage is caused by failure to follow the instructions the warranty does not apply Safety 1 This bolt of lightning indicates uninsulated material within the device may cause an electrical shock For the safety of remove the covering everyone in your household please do not The exclamation mark calls attention to features for which you should read the enclosed erature closely to prevent operating and maintenance problems WARNING To reduce the risk of fire or electric shock the device should not be exposed to rain or moisture and objects filled with liquids such as vases should not be placed on the device CAUTION To prevent electric shock fully insert the plug For regions with polarized plugs To prevent electric sl Only use attachments accesso d Use only power supplies listed hock match wide blade to wide slot ries specified by the manufacturer in the user manual The product shall not be exposed to dripping or splashing Do not place any sources of d ighted candles anger on the product e g liquid filled objec
13. olders Movies Display movie files EN 13 Music Display music files Photos Display photo files _m o a A Folder Movies Music Photos 3 Selecta file to start play Search for media files g In the list of files or folders press OPTIONS to select your options In Folder To display files in different views Select Thumbnails List or Preview To show files by media type Select All Media Movies Photos or Music In Movies Music and Photos To search for a file by keyword Select Search Enter the keyword on the onscreen keyboard see Enter text on page 11 To sort files in different ways Select Sort Order To go to the folder view Select Go to Folder Select play options 1 During play press OPTIONS on the remote control 2 Press A V lt P to select an option Press OK to confirm For videos Subtitle Select a subtitle language Audio Select an audio language 14 EN Night Mode for aud and soft sound level loud disturbing others io encoded in Dolby Digital Makes loud sound level softer er so that you can enjoy videos at a low volume without GOTO Skip to the specific time title or chapter Repeat Title Repeat Repeat All Repeat al Repeat Off Switch off Video Setting Select For music Repeat Off Switch off Repeat One Repeat Repeat All Repeat al Shuffle Loop Pl
14. ts Batteries battery pack or batteries installed shall not be exposed to excessive heat such as sunshin e fire or the like Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type 4 EN Modification of the product could result in hazardous radiation of EMC or other unsafe operation Warning e Never remove the casing of this product e Never lubricate any part of this product e Never place this product on other electrical equipment e Keep this product away from direct sunlight naked flames or heat e Ensure that you always have easy access to the power cord plug or adaptor to disconnect the product from the power e Where the mains plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable Compliance CE This product complies with the radio interference requirements of the European Community Class Il equipment symbol m CLASS I apparatus with double insulation and no protective earth provided Any changes or modifications made to this product that are not expressly approved by Philips Consumer Lifestyle may void the user s authority to operate the equipment Note e The type plate is located on the bottom of the product EN 5 Copyright Specifications are subject to change without notice Trademarks are the property of Koninklijke Philips Electronics
15. turer The caution sign printed on the back of the product indicates risk of electric shock Never remove the cover of the product Always contact Philips Customer Support for service or repairs Any operation expressly prohibited in this manual or any adjustments and assembly procedures not recommended or authorized in this manual shall void the warranty EN Wi 3 Basics Connect HDMI HDMI connector for audio video output e Connects to a high definition TV HDTV through an HDMI cable Power connector Connects to power supply through the AC power cord To connect to a TV through AV cables Through AV use the supplied AV cable to connect HMP4000 to a TV J Make sure that the plugs and sockets match in color 8 EN For high quality audio Through OPTICAL use a fiber optical cable to connect HMP4000 to the OPTICAL or SPDIF input connector on an audio video system Switch on or off 1 On HMP4000 press on the remote control to switch on L gt The power indicator lights up white paws 2 On the TV switch to the input connector of HMP4000 On the remote control of your TV use the source button to select the input channel of HMP4000 iS IN AV HDMI 1 e HDMI 2 0000 HDMI 3 SOURCE 0000 Side HDMI poon Side AV ae EN 9 3 To switch HMP4000 to standby mode press again on the remote control Ly The power indic
Download Pdf Manuals
Related Search