USER MANUAL LED LETO UV
Contents
1. USER MANUAL LED LETO UV SAFETY INSTRUCTIONS CAUTION Be careful with your operations With a dangerous voltage you can suffer a dangerous electric shock when touching the wires Keep this device away from rain and moisture Unplug mains lead before opening the housing For your own safety please read this user manual carefully before you initial start up Features Four operation modes DMX 512 protocol auto and master slave and sound active operating in various modes to form different led effects DMX 512 connection connection between fixtures Occupation of the XLR connection If you are using controllers with this occupation you can connect the DMX output of the controller directly with the DMX input of the first fixture in the DMX chain If you wish to connect DMX controllers with other XLR outputs you need to use adapter cables Building a serial DMX chain Connect the DMX output of the first fixture in the DMX chain with the DMX input of the next fixture Always connect one output with the input of the next fixture until all fixtures are connected Caution At the last fixture the DMX cable has to be terminated with a terminator Solder a 120 resistor between Signal and Signal into a 3 pin XLR plug and plug it in the DMX output of the last fixture Connection with the mains Connect the device to the mains with the enclosed power supply cable OPERATION 1 DMX 512 protocol Addressing The LED DISPLAY on th2. djusted by ch8 170 255 color following one by one the running speed can be adjusted by ch8 Channel 5 running speed adjustments When ch4 at 86 169 or at 170 255 the speed adjustment works 2 Sound active Press the MODE button till BEAE shows in the led display confirm by the the button ENTER then the item will run to the beat of music 3 auto Press the MODE button the following functions can be achieved by the button ENTER AUTO run the preset shows CFOO increasing brightness then decreasing brightness the speed of increasing brightness then decreasing brightness can be adjusted by the buttons of UP and DOWN from 00 slowest to 99 fastest CCO8 color changes the speed of color changes can be adjusted by the buttons of UP and DOWN from 00 slowest to 99 fastest CS99 color selections the color selections can be done by the buttons of UP and DOWN from 00 to 99 Y000 press the button MODE five seconds till YOOO shows in the led display the UV color brightness can be adjusted by the buttons UP or DOWN 4 Synchronization amp master slave mode Take one item and set the item at sound active or auto as above then get other items and press the button MODE till SUB shows in the led display confirm by the button of ENTER then connect the items to the item at auto sound active already set by DMX cables disconnect the items from DMX controller the items will work symtaneously the item at auto sound active as master t
3. e rear side of the base allows you to assign the DMX fixture address which is defined as the first channel from which the item will respond to the controller If you set for example the address to channel 7 the item will use the channel 7 to 14 for control Please be sure that you don t have any overlapping channels in order to control each item correctly and independently from any other fixture on the DMX data link If two three or more items are addressed similarly they will work similarly At DMX mode you can choose the address from 1 to 512 After you connect the item to the mains the item starts running When the item finishes resetting d OO1 will flash in the led display and then set the desired DMX address by pressing the UP or DOWN buttons DMX Controlling After having addressed all items you may now start operating these via your lighting controller After switching on the item will automatically detect whether DMX 512 data is received or not Five DMX channels Channel 1 UV ultraviolet color from small to big brightness dimmig Channel 2 strobe from slow to fast Channel 3 dimmer color macro 0 30 dimmer on at ch1 ch2 ch3 ch4 31 255 color macro the brightness can be adjusted by the master dimmer at chl Channel 4 dimmer increasing brightness then decreasing brightness colors following one by one 0 85 dimmer on at ch1 ch2 ch3 ch4 86 169 increasing brightness then decreasing brightness the running speed can be a
4. he others as slave TECHNICAL SPECIFICATIONS Power supply 90 240V AC 50 60Hz Power consumption 60W DMxX control channels 5 DMX 512 connection 3 pin XLR Number of LED 288 PCS high MCD UV LED ultraviolet Dimensions 360 250 80mm Weight 5 kgs Please note Every information is subject to change without prior notice
Download Pdf Manuals
Related Search