saverline 18m and 30m fall arrest and recovery blocks user manual
Contents
1. SpanSet Height Safety SAVERLINE 18M AND 30M FALL ARREST AND RECOVERY BLOCKS USER MANUAL TE SpanSet WARNING These instructions including safe usage warnings and limitation of the products must be provided to the user and they must be read before any inspection installation or use of this product If there are any points in this manual that you are unsure of seek a competent trained person to clarify before using 2 013 Instruction Manual Saverline 18m 30m Recovery Block indd 1 D 4 06 13 9 37 AM Saverline 18m and 30m Fall Arrest and Recovery Blocks The SVLRB is a variant of the Saverline SVLB family of devices and has been designed for your safety when working at height They have a unique sealed braking system that ensures the device pays out freely but locks on rapidly to minimise free fall and impact loads on both the anchorage and the body The SVLRB 18 has an emergency retrieval function which can raise or lower the user in the event of an emergency It is not designed as an everyday winch If the unit has been deployed in a fall arrest the hook load indicator will show on the swivel hook If the gear mechanism has been used in an emergency the plastic padlock will be missing or broken If the hook indicator is visible or the plastic tag not present or broken do not use the device Features 18m 59ft maximum working length 30m 99ft maximum work2. Signature Date of Next Recertification Results Comments Organisation Signature Date of Next Recertification Results Comments Organisation Signature Date of Next Recertification Results Comments Organisation Signature Date of Next Recertification Results Comments Organisation Signature Date of Next Recertification Results Comments Organisation Signature Date of Next Recertification Results Comments Organisation Signature Date of Next Recertification Results Comments Organisation Signature Date of Next Recertification Results Comments Instruction Manual Saverline 18m Recovery Block 10 of 12 2 013 Instruction Manual Saverline 18m 30m Recovery Block indd EO SpanSet Australia Ltd 4 06 13 9 37 AM Explanation of Block Symbols t Inspect the device life line hook and anchorage for signs of wear deformation damage or corrosion Ensure hook swivels and twist gate operate and close correctly Ensure load indicator has not deployed The device should be fitted above the user or alternatively to a tripod with a pulley positioned above the user The device will arrest a fall within 2 0 metres Do not use the device at full line pay out or in situations where there is less than 3 metres of ground clearance This device must only be serviced by a trained and competent individual Never attempt to serv
3. designed to meet the manufacturer for service and re calibration requirements of BS EN 360 2002 and EN1496 Class A B For clarification on any certificate This device must only be serviced by a trained contact SpanSet and competent individual Never attempt to service this unit or tamper with its function in aia Exclusions SpanSet holds global product liability cover Quality for your safety but will not however be All SpanSet products are manufactured under responsible for ISO 9001 2008 and to the highest standards Users who are out of the scope of any written The scope of use within the certification held manuals of training given allows SpanSet to design manufacture and test Any device that has not been inspected under the current legislation and manufacturers guidelines Personal Protection Equipment Horizontal tensile test machine abrasion tester and dynamic drop test rig are just part of the full Devices that have been damaged range of test facilities used to ensure ultimate safety of our product range When the maximum weight in kilograms has been exceeded All SpanSet devices must only be installed Devices that have no serial number markings by SpanSet personnel or a trained operator and the manufacturers name SpanSet Strict training is given and written exams are Australia Ltd is not present completed before full certification can be given to operators Instruction Manual Saverl
4. 3 9 37 AM Storage Issue and Inspection Storage in a central protected location allows assurance of inspection on issue and return The device should be stored in a clean dry place where it can be protected from damage by chemical attack and sharp objects It should be stored with its instructions and record card at all times Return the device back to it s original box or other suitable container for storage and transportation After use return to the store and never leave the device lying around site This and associated equipment must be visually inspected by a competent person when initially delivered to site there after the product must be inspected before and after use A record card is printed in the back of this manual and should be updated after each routine inspection Follow the points laid down in the section headed Inspection without deviation The supervisor must ensure that the equipment is being used correctly by a trained and or otherwise competent person who is aware of its safe use and inspection Additionally the supervisor must ensure that there are suitable and accessible anchorages in the working environment to allow safe anchorage of the device Inspect the device life line hook and anchorage for signs of wear deformation damage or corrosion Webbing polyester Ensure that the webbing is free from cuts abrasion and wear marks Wire Rope galvanised steel or stainless steel Ens
5. Saverline 18m Recovery Block 2 013 Instruction Manual Saverline 18m 30m Recovery Block indd 2 D 2 of 12 SpanSet Australia Ltd 4 06 13 9 37 AM user must not have to lean out to reach the device or hook and endangering themselves with a fall hazard Never install where there is a possibility of electric shock hazards When installing ensure that you are not subjecting yourself to potential fall hazards wear a full body harness and shock absorbing lanyard anchoring your self whilst installing Use Installed from an over head anchorage the device affords a user fall protection within a cone of 45 degrees Never work outside of this as if a fall were to occur the device would lock and the user would swing like a pendulum and may sustain injury from this hazard Fall Protection Check the hook load indicator is not deployed follow the inspection routine laid down in this manual The device will arrest a fall within 2 metres Do not use the device at full line payout or in situations where there is less than 3 metres of ground clearance below the feet of the user Connect only to the fall arrest attachment of a fall protection full body harness Ensure that the hook of the device Is secure in the harness D ring and that the gate of the hook is locked Never work above the level of the device or tie off the life line to prevent it retracting The line between the user and the device must be
6. b into the block Press the handle towards the block to disengage the gearing Compatibility The SVLRBs are suitable only as fall arrest blocks if they are attached to an anchorage by use of a connector and used with a full body harness which conforms to AS NZS 1891 1 such as the SpanSet ERGOplus range Warnings Never work alone Read and understand manufacturer s instructions before inspection installation or use of this product Never use this product if you weigh more than 136kg Only use approved equipment with this product Only to be used by trained personne Seek medical advice from a doctor before using this product if you have sustained a spinal injury suffer from a neck or back complaint or you are taking prescription medication Never use if you are under the influence of alcohol or recreational drugs Extra care should be taken if welding whilst using this product protect the life line from splatter and heat at all times Never leave this system unattended Never use this system unless you are supervised by a trained and competent person Ensure the lifeline is free to extend and retract from the device and that the brake engages with a sharp jerk before attempting o use as a fall arresting unit Instruction Manual Saverline 18m Recovery Block 2 013 Instruction Manual Saverline 18m 30m Recovery Block indd 4 D 4 of 12 SpanSet Australia Ltd 4 06 13 9 37 AM Pri
7. ice this unit or tamper with its function in any way CLICK v7 Pull line sharply to engage brakes and ensure device locks before each and every use Connect only to the fall arrest attachment of a full body harness Ensure that the hook of the device is secure in the harness D ring and that the gate of the hook is locked Maximum capacity 136kg including user tools and equipment Install the device so that it is away from the edge so avoiding swing hazards the potential user must not have to lean out to reach the device or hook and endangering themselves with a fall hazard Check for sharp edges and use edge protection where required Instruction Manual Saverline 18m Recovery Block 2 013 Instruction Manual Saverline 18m 30m Recovery Block indd EO 11 of 12 SpanSet Australia Ltd 4 06 13 9 37 AM SpanSet Australia Ltd 2013 All specifications correct at time of publishing SpanSet Australia Ltd reserve the right to alter a specification at any time without notice Head Office SpanSet Australia Ltd 13 Pullman Place PO Box 164 ta Emu Plains NSW 2750 Phone 02 4735 3955 Fax 02 4735 3630 sales spanset com au ee Www spanset com au SpanSet 2 013 Instruction Manual Saverline 18m 30m Recovery Block indd 12 4 06 13 9 37 AM
8. ine 18m and 30m Recovery Blocks 8 of 12 SpanSet Australia Ltd 2 013 Instruction Manual Saverline 18m 30m Recovery Block indd 8 D 4 06 13 9 37 AM Fall Arrest Block Service Log Model Serial No Date Entered Service Date of Recertification Organisation Date of Next Recertification Name l Signature o Results Comments Date of Recertification Organisation Date of Next Recertification Name sid Signature s SY Results Comments Date of Recertification Organisation Date of Next Recertification Name si Signature si SY Results Comments Date of Recertification Organisation Date of Next Recertification Name ss Signature siSY Results Comments Date of Recertification Organisation Date of Next Recertification Name sstsi lt SsCSY Signature Results Comments Date of Recertification Organisation Date of Next Recertification Name S Signature s Y Results Comments Date of Recertification Organisation Date of Next Recertification Name si Signature s SY Results Comments Date of Recertification Organisation Date of Next Recertification Name ssts S S Signature tsi SY Results Comments Instruction Manual Saverline 18m and 30m Recovery Blocks 9 of 12 SpanSet Australia Ltd 2 013 Instruction Manual Saverline 18m 30m Recovery Block indd 9 D 4 06 13 9 37 AM Fall Arrest Block Service Log Model Serial No Date Entered Service Date of Recertification Organisation
9. ing length Maximum user weight 136kg Sleek and modern design Light weight including swivel hook Composite housings UV stabilised Internal steel chassis Alloy swivel hook as standard Sealed braking system Cleaning brushes to reduce debris entering the unit Carrying handle and shoulder strap available as an accessory Fully serviceable Tested for vertical use Device will function horizontally Meets and exceeds EN 360 ANSI OSHA Installation The device must not be installed where the following hazards may endanger the user or prevent the efficient operation of the system The area below the device must be free of obstruction that will prevent the free payout of rope or may obstruct the movement of the user The environment must be free of heavy solvents or acids that will degrade the device life line or the hook The device must be anchored to an EN795 anchor which may be an eyebolt or EN795 Class B Tripod or Davit The anchor should be ixed preventing the device anchorage from moving whilst in use Ensure there is sufficient free area around the SVLRB for the handle to fully rotate f there is any chance of the line becoming entangled in lifting equipment passing vehicles or structure then do not install Install the device so that it is away from the edge so avoiding swing hazards the potential Instruction Manual
10. mary Fall Arrest Device with Secondary Backup When entering a confined space when a fixed access system is installed the user should use 1x Tripod HD Heavy Duty Tripod 1x SVLRB 18 or SVLRB 30 Fall Arrest and Recovery Blocks The Saverline should be in free run mode and in the event of a fall the device will automatically lock on and then the winch can be engaged Please Note The Saverline Recovery and Fall Arrest Block is not intended to be used as a continuous winch only as a retrieval device in emergency situations Instruction Manual Saverline 18m and 30m Recovery Blocks 5 of 12 SpanSet Australia Ltd 2 013 Instruction Manual Saverline 18m 30m Recovery Block indd 5 D 4 06 13 9 37 AM Primary Raise and Lower Device with Secondary Backup When entering a confined space when there is no fixed access system and there is a need to lower the user down under control you should use 1x Tripod HD Heavy Duty Tripod 1xSVLRB 18 or SVLRV 30 Fall Arrest and Recovery Block 1x SVLWB 20 or 1 x SVLWB 30 a The SVLWB is your primary lowering device and in the event of a fall the SVLRB will automatically lock on and the winch can be engaged Instruction Manual Saverline 18m Recovery Block 6 of 12 SpanSet Australia Ltd 2 013 Instruction Manual Saverline 18m 30m Recovery Block indd 6 D 4 06 1
11. taut at all times Never run or jump whilst attached to the unit walking at a moderate pace will ensure that the device does not sense a fall Note For an explanation of the icons on this fall arrest block please see the inside back cover Rescue Planning Before use and when using the SVLRB Fall Arrest and Recovery Blocks users and supervisors should always make suitable provisions for rescue A full risk assessment should be carried out to determine the most effective safe and quickest form of rescue For more information on specialist rescue systems or training please contact the SpanSet Australia technical team Rescue In the event of an emergency the rescue function can be engaged to raise and or lower a fallen worker To engage the rescue function first break the plastic padlock and remove the pin Push the small knob to release handle from housing and to engage the retrieval gears into position Instruction Manual Saverline 18m and 30m Recovery Blocks 2 013 Instruction Manual Saverline 18m 30m Recovery Block indd 3 D 3 of 12 SpanSet Australia Ltd 4 06 13 9 37 AM To raise a person simply rotate the handle clockwise To lower a person simply rotate the handle clockwise 1 8th turn to release brakes then turn anticlockwise to lower To disengage the gear ensure no load is on the device align the handle to its parked position pointing towards the top termination and push the small kno
12. ure that the wire rope is free from cuts abrasion and kinks Fibre Rope Ensure that the fibre rope is free from cuts abrasion and wear marks Ensure hook swivels and twist gate operate and close correctly Ensure hook load indicator is not deployed Pull line sharply to engage brakes and ensure device locks before each and every use Pull out line to ensure that it pays out and recoils smoothly All housing screws must be secure Check the user instructions are clear and legible If the webbing or fibre rope becomes wet in use ensure webbing or fibre rope is extended and left to dry naturally To clean the housing webbing or fibre rope a mild detergent can be used with warm or cold water The webbing or fibre rope must be extended from the device and left to dry naturally Ensure that device certification is current before use the device must have been serviced and inspected within the last 6 months If for any reason the inspection of this device shows signs for concern or doubt then the device must be quarantined and removed from service immediately Advice should Instruction Manual Saverline 18m Recovery Block 2 013 Instruction Manual Saverline 18m 30m Recovery Block indd 7 D 7 of 12 SpanSet Australia Ltd 4 06 13 9 37 AM be sought from the supervisor and if still Legislation and Sta ndards concerned the device must be sent to the supplier an approved service agent or the This SVLRB has been
Download Pdf Manuals
Related Search