Home

MEG6501-0001, MEG6501-0002

1. Version 1 0 0 RC 9 SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION v Search results 20 Wat 16 minutes F Wattor 15 seconds for 15 seconds se Wait command ID 64 i Wait for 1 hour aan for 1 minute u for 1 second sar 20 en ee for 20 seconds Wait 24 hours Wait 2 hours Wait 2 minutes Wait 2 Son Wait 30 Tan Wait 30 seconds Wait 3 hours iva andes Wait 5 seconds Wait 6 hours Po a oh Sprinkler sequence Function None Permissions Visible v Execute at startup CLOSE Connected rooms Name Actions executed from the scenario Name Sprinkler 1 Sprinkler 2 XA cK xX KM KH X Sprinkler 3 Sprinkler 4 Sprinkler 5 Wait for 15 seconds Description ETS name m Action Value Write On Write Off Write Off ra Write Off e Write Off Execute Scenarios with built in WAIT COMMANDS can be stopped after they once have been started for this purpose the graphic icon of the SCENARIOS includes a STOP button If this STOP button is pressed the SCENARIO is interrupted The states of the object contained in the SCENARIO which were already changed when starting the SCENARIO will not be restored Just the further execution of the SCENARIO will be stopped Stopping a SCENARIO can also be triggered by an event in dependence of the status change of another object e g a KNX object Version 1 0 0 RC 9
2. Complex objects Advanced functions gt Users and permissions 81 U motion KNX Server Installation Manual merten by Schneider Electric 4 2 NAVIGATION MENU This page permits to personalize the navigation menu The individual links can be defined as well as their order within the navigation menu itself If the EXPERT mode is active all personalization options of the navigation menu are accessible SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION Navigation menu gt Setup Technologies v Customization Themes L Favourites Options gt Visualisation Advanced functions Users and permissions Name lt Favorites X Rooms X Functions Scenarios X Intercom X Video surveillance Energy X Notifications X Weather X RSS feeds X Internet bookmark X Message board Descnption ETS name State Details Most used objects of this user Room structure of the visualisation KNX objects structured by functionality Scenarios and automatic actions Communication with intercom systems Visualisation of IP cameras Energy management List of notifications messages generated by the system Shows the information of a weather station as well as online forecasts Shows different RSS feeds in realtime Simplified access to web contents Family board for creating on screen messages Through the option VISIBLE the individual menu items for the navigation menu can be activated or hidden
3. Import Export gt Customization Visualisation Advanced functions Users and permissions u a a 13 3 CONSUMPTION 13 3 1 CREATION OF A NEW ENERGY COUNTER After selecting the entry CONSUMPTION from the ENERGY menu one or more objects of the type ENERGY COUNTER can be created These objects basically are a special type of COMPLEX OBJECTS optimized for the visualisation of energy values received from a KNX counter hardware Furthermore these objects can also be used as reference objects for the load control functionality which will be explained in the further chapters of this manual After the creation of anew ENERGY COUNTER you can access its properties window just like for every other object too The following parameters can be configured POWER ENABLE POWER If this checkbox is enabled the calculation of the power consumption is done using the CALCULATION received current and voltage data In this case in the lower area of the properties window the section SUB OBJECTS FOR POWER CALCULATION will appear which is explained more in detail on the following pages These values define the maximum and minimum power consumption through which the percentage values of the current power consumption are calculated and shown in the graphical display of the object MINIMUM POWER MAXIMUM POWER MAX LIMIT POWER MIN LIMIT POWER LIMIT 1 POWER LIMIT 2 POWER These thresholds determine on one side
4. Search results 20 gt Setup Technologies gt Customization gt Visualisation v Advanced functions Logics gt Conditions v Virtual objects Dooropener Dooropener entrance Living room door contact Kitchen window contact Energie photovoltaic Power photovoltaic Load over limit Limit Load control Pump On Off Sprinkler 5 Sprinkler 4 Sprinkler 3 Sprinkler 2 Sprinkler 1 ee re re re re a E O oe oe of m Sprinkler On Off General information Name Description Represenation Rendering Value type Boolean Value CLOSE Rooms to which the object belongs Name Connected scenarios Name Active events ID Name x 595 Sprinkler sequence nz ans 79 SAVE CLEAR CACHE Sprinkler On Off Description ETS name Action EXPERT Value Condition un LOGOUT VISUALISATION m Order Action Value merten by Schneider Electric 9 5 CUSTOMIZATION OF THE WAIT COMMANDS Objects of the type WAIT COMMAND which allow to insert delays into SCENARIOS can be customized in the following way Locate the desired WAIT COMMAND using the search function Before modifying the WAIT COMMAND create a clone using the corresponding button in the TOOLBAR by modifying the original WAIT COMMAND there is the risk that other functionalities using this WAIT COMMAND could stop working as desired Access the configuration window of the cloned
5. kitchen or living room in the VISUALISATION by accessing the room 1 floor will be like accessing a sub menu containing two other rooms kitchen and living room 57 merten by Schneider Electric U motion KNX Server Installation Manual The configuration page of the new created room looks like shown below Version 1 0 0RC 9 CLEAR CACHE EXPERT LOGOUT VISUALISATION T New Room 1 Search results New Room 1 CLOSE Dir Setup Technologies General information Customization Name v Visualisation vy Rooms Represenation Functions Template None l Links Scenarios Background image Complex objects Advanced functions Users and permissions Icon en The settings for a new room are New Room 1 CLOSE NAME Name of the room that will also be shown in the VISUALISATION and the navigation menu of the VISUALISATION TEMPLATE Defines the graphical layout through which the room will be shown inside the VISUALISATION following templates are available GRID the contained objects are shown in a table grid It is possible to embed a picture at the top at the right or at the left or as background of the contained objects BACKGROUND The contained objects are positioned directly upon a background image The option None means that the room acts as sub menu for the navigation inside the VISUALISATION and so no objects will be s
6. KNX you can change the physical address of U motion KNX Server used for the communication with the KNX bus The address must be entered in the format X Y Z respecting the limitations given by the KNX specification First number between 0 and 15 Second number between 0 and 15 Third number between 0 and 255 As distinct from the most KNX devices which necessarily must use a physical address which corresponds to 5 the line they are installed U motion KNX Server is able to communicate with all devices of the system independently from its physical address Therefore modifying the physical address of the server has merely the purpose to avoid conflicts with other devices and to keep a certain alignment with the KNX system Version 1 0 0 RC 9 SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION T Configure communication feo eae Configuration KNX communication BETZ close Setup KNX Physical address v Technologies Physical address 0 0 255 Y KNX e g 1 1 200 ETS impor rules e ETS import ETS project gt Video surveillance gt Intercom gt Energy Customization gt Visualisation Advanced functions Users and permissions 4 53 merten by Schneider Electric 5 10 ETS GATEWAY U motion KNX Server Installation Manual U motion KNX Server offers the possibility to use the integrated KNX interface as a gateway in order to use it as programming interface in ETS In this way the w
7. VISUALISATION m merten U motion KNX Server by Schneider Electric Installation Manual 10 3 INTEGRATION INTO THE VISUALISATION Once the link object has been created it can be connected via Drag amp Drop using the search function in the following ways gt Connection to a ROOM open the properties window of the room o locate the link object through the search function o drag the link object to the section CONTAINED OBJECTS Or in alternative open the properties window of the link locate the room through the search function o drag the room into the section Rooms containing the link gt Connection to the NAVIGATION MENU open the entry NAVIGATION MENU in the menu CUSTOMIZATION o locate the link object through the search function o drag the link object to the desired position within the list of elements of the navigation menu gt Connection to the FAVOURITES open the entry FAVOURITES in the menu CUSTOMIZATION o locate the link object through the search function o drag the link object to the desired position within the list of elements of the favourites 10 4 HANDLING INSIDE THE VISUALISATION After connecting the link object to one or more places of the visualisation you can access it through the corresponding page e g directly from the navigation menu or the HOME page If the destination of the link object is a room it will be opened as soon the link is clicked URL
8. dimming RGB control etc For more information refer to chapter 8 of this manual 2 4 15 ADVANCED FUNCTIONS This section permits to extend the system with functionalities that are not programmed on KNX level The following advanced functions are available LOGICS Allows AND OR operations on 1bit KNX objects CONDITIONS Permits to compare a value of one or more objects with a fixed value and to define events which are launched in dependency of the comparison result VIRTUAL OBJECTS Permits to create virtual objects for example for saving values for connecting passive and active events etc INTEGRATORS Permits to observe evaluate values over a given time period specially convenient for evaluating energy values NOTIFICATIONS Permits to send notifications either on screen or via mail in dependency of events within the installation CLIENTS Permits to create relations between the devices connected to U motion KNX Server each connected device will be shown as CLIENT and different actions of the software like e g scenarios VoIP actions 23 merten U motion KNX Server by Schneider Electric Installation Manual 2 5 SEARCH FUNCTION By entering one or more keywords into the search box in the upper left corner the software searches for all objects which include the specified keyword in their names or other primary properties The results are displayed in the left area instead of the navigati
9. EDIT button in the TOOLBAR SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION Search results gt Setup Technologies gt Customization v Visualisation v Rooms Parterre E Garage Functions gt Links Scenarios Complex objects Advanced functions gt Users and permissions a a a If the configuration window of an entry is opened through the EDIT action the entry will show an arrow icon instead of 3 points on the right side This icon will be displayed until the configuration window of the entry is closed and shall facilitate the navigation if multiple tabs are opened in the workspace 18 merten U motion KNX Server by Schneider Electric Installation Manual TER ua ca wur Losour vsuaLisanon CD 1 Flee 2 Nr _ gt She gt Tacho sem To won D Castorraratce ven y Horta D IORI ati gt Pxinre ergir and Pub ocreen gt gt Grap o Furies ave Flo natyre mag gt Lira gt eraros D Cigi oteects b Adve ed hron Unt amd press COME ee As mentioned before some of the entries of the navigation menu permit to create submenus or to insert new objects This is done using the NEW button in the TOOLBAR by pressing this button a new object the object type depends on the selected entry will be created and selected automatically If the EDIT button or the 3 points in the entry itself is clicked the configuration wi
10. Installation Manual 12 3 AXIS CAMERAS AND VIDEOSERVER U motion KNX Server offers native support for all cameras and videoserver of the brand AXIS further details on the available models as well as the product catalogue can be found on http www axis com In order to configure an AXIS camera videoserver in U motion KNX Server please follow the steps below Please access the configuration area of U motion KNX Server Please select TECHNOLOGIES gt VIDEO SURVEILLANCE Click on the ADD button to create a new camera and access its configuration window through the EDIT function e Please select AXIS MJPEG as video format SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION New Camera 2 T New Camera 2 CLOSE gt Setup v Technologies PRKNA Name New Camera 2 v Video surveillance e Ename Video format Axis MJPEG x L IP address 127 0 0 1 v Intercom IP port 80 gt VolP participants External units Protocol HTTP x gt Call groups a 1 Clients Users Resolution 640x480 Settings Resolution background view 640x480 gt Energy see Resolution grid view 640x480 Customization gt Visualisation Image compression 0 100 10 Advanced functions Max FPS 5 gt Users and permissions l Icon X oG Please select AXIS MJPEG as video format IP ADDRESS Local IP address of the camera videoserver IP PORT IP port through which the video stream can be accessed Please selec
11. KNX Server This can be an advantage in certain cases The project has already been imported in the past and now a version with new group addresses should be imported without the risk of losing the changes made to the old group addresses Certain group addresses of the project should not be visible inside the visualisation The amount of group addresses present in the ETS project breaks the limit of the supported group addresses of the version of your U motion KNX Server In the last case U motion KNX Server will automatically enable the selective import you will be able to import only the amount of group addresses supported by your version is shown on top of the page The following screenshot shows an example of the selective import BENE TULEA CALCHI EEFTAT LOEN PERLE EA THA E Bin k Erp F Cu Pen zn TOT Licht A y TEOM dajie 4 Kurse y TEON Thri Fraa Bee ni 12072 Thee Kamin EGJ Thermo Hecht 18T Terz HT A FH ae i r r r VE Treat Ei Eaton EHDE Theab iii Hin 12018 Secndoss Eirias a 1 ee eer y 2015 erde Ten EHP Jen Leine nen iis Lica c IPI Lira iD LARET LEHE LEETE LEMI LEFI LEN G 1 01 Diir LEWD LES del 120710 Phan aS The group addresses present in the ETS project are sorted after middle groups and are shown in ascending order together with their original ETS denomination Through the checkboxes you are able to select deselect single group addresses Furthermore you can select deselect entire middle group
12. OP 17 k al r x Thermostat with OP 69 merten U motion KNX Server by Schneider Electric Installation Manual RGB Allows grouping all necessary objects for the control of RGB lights in one object control of the individual color channels ON OFF commands color intensity etc A j EE i ia Off Off On WEATHER STATION Permits to group all objects related to a weather station into one object J Brightness Twilight Temperature A Humidity Bo 0 Day Night Day Rain alarm Cie No rain Wind alarm og No wind 70 merten U motion KNX Server by Schneider Electric Installation Manual MULTIROOM ZONE Permits to combine into a single pop up all control objects of a Multiroom audio zone connected via KNX F GENERIC Allows grouping several objects into a pop up window where the structure and the objects to be shown can be freely chosen refer to the appropriate chapter of this manual Depending on the selected TEMPLATE only compatible objects can be added since the COMPLEX OBJECT needs to understand where each object must be positioned and which functionality they will have to assume for the available functions of aCOMPLEX OBJECT only compatible objects can be used 8 3 OBJECT ASSIGNMENT Once a COMPLEX OBJECT is defined the desired objects can be inserted into the area OBJECTS CONTAINED IN THE COMPLEX OBJECT for being assigned to one of the functions the CO
13. Schneider Electric Installation Manual 6 ROOMS 6 1 INTRODUCTION This chapter deals with the creation and customization of rooms in which the various objects are grouped in the VISUALISATION Normally it is recommended to keep the structure of the rooms similar to the structure of the building itself It will be easier for the user to control the building through the VISUALISATION when the navigation in the VISUALISATION is the same as the user would have to do in the building for reaching a KNX device light switch etc Such a VISUALISATION can only be created when the rooms are structured inside the VISUALISATION at the same way they are structured in the real building and when in each room all the object are located which are also truly installed as KNX devices in the real rooms of the building This is only a recommendation naturally the rooms can also be created freely and filled with any kind of object function desired 6 2 CREATE NEW ROOMS In order to create a new room in U motion KNX Server Access the ADMINISTRATION area Select VISUALISATION ROOMS Click on the ADD button in the toolbar at the bottom The new room will be added to the sub menu ROOMS If an already existing room is selected when the ADD button is pressed the new room will be added within the selected room in this way also a tree structure for navigation in the VISUALISATION can be created e g a room 1 floor could contain other rooms like
14. U motion KNX Server by Schneider Electric Installation Manual Notifications Family Board 1 unread message Alarm If the CONFIRM button of a single NOTIFICATION is pressed the corresponding NOTIFICATION will vanish from the list of unread messages but it will not be deleted from the U motion KNX Server database By pressing the DELETE button all existing NOTIFICATION will be confirmed and therefore disappear from the popup window Each ON SCREEN NOTIFICATION can be combined with a specific priority alarm warning information Whether the NOTIFICATION popup window shall be opened automatically or not whenever a new NOTIFICATION with the appro priate priority is triggered it can be configured in the ADMINISTRATION menu of U motion KNX Server under CUSTOM IZATION OPTIONS NOTIFICATIONS For more detailed information about the NOTIFICATION pop up window refer to the user s manual 11 6 1 LOG NOTIFICATIONS Any triggered on screen messages is recorded and stored in the so called system log In the administration area the system log is available under the entry LOG NOTIFICATIONS Messages that have been read are not automatically de leted from the memory and so still available in the system log Version 1 0 0 RC 9 GSTS cue cache EXPERT LOGOUT VISUALISATION bog notifications oS Setup gt Technologies Data from to gt Customization v Advanced functions gt Logics 1 gt Conditions Dat
15. able to press the RESET button again please repeat the whole procedure 1 8 RESET TO FACTORY SETTINGS U motion KNX Server can be reset to factory settings IP address amp database through the RESET button on the bottom side of the device Localize the RESET button on the device and get a screw driver or a similar tool with a small diameter to reach the RESET button through the small cutout in the housing of the device Press the RESET button until the SERVICE LED starts blinking minimum 10 seconds afterwards release the RESET button Press the RESET button again within the next 5 seconds and keep the button down until the SERVICE LED stops blinking and stays on afterwards release the RESET button AS soon as the SERVICE LED turns off U motion KNX Server is reachable under the factory IP address 192 168 0 110 with empty database factory settings If the SERVICE LED stops blinking after the RESET button was pressed for the first time 10 seconds and before you were able to press the RESET button again please repeat the whole procedure 14 merten U motion KNX Server by Schneider Electric Installation Manual 2 GENERAL OVERVIEW 2 1INTRODUCTION This chapter gives an overview of the ADMINISTRATION area of U motion KNX Server and explains different tools and menus which can be used to configure the web server 2 2 ADMINISTRATION AREA INTERFACE The ADMINISTRATION is divided into the following secti
16. accessible to users of other 120 merten U motion KNX Server by Schneider Electric Installation Manual 15 REMOTE ACCESS 15 1 INTRODUCTION This chapter explains how to configure the network for allowing remote access to U motion KNX Server and therefore be able to check out the VISUALISATION also from outside of the building 15 2 REMOTE ACCESS THROUGH INTERNET To enable the remote access to U motion KNX Server through internet please follow the steps below e The parameter GATEWAY in the network settings of U motion KNX Server must be set to the IP address of the installed internet router e The configuration of the installed internet router must be changed and a Port Forwarding rule to the IP address of the installed U motion KNX Server on port 443 and 22 data type TCP must be created If the ports 443 or 22 are already used for other remote accesses then the port forwarding can be realized through other ports where the external ports must be forwarded to the IP address and the ports 443 and 22 of the installed U motion KNX Server Example access through URL https www myUrl com 1443 gt port 1443 of the internet router must be forwarded to the IP address and port 443 of the installed U motion KNX Server For detailed information on setting up a Port Forwarding rule please refer to the documentation of the installed internet router 121 merten U motion KNX Server by Schneider Electric Installation M
17. client Enables the first synchronization of HTML content in the browser on the first access with a new browser window This accelerates every next access even when the browser gets closed HINT The HTML client cache can be deleted on U motion KNX Server by restarting the device Enable cache HTML server Enables saving of often user pages on the U motion KNX Server to accelerate future access from other devices PC mobile devices Enable DB client cache Enables saving of different data in the browser cache during the navigation in the VISUALISATION to accelerate future navigation It is recommended to activate the cache technologies If the cache technologies are enabled the 5 VISUALISATION reacts nearly in real time Only trained personal should change these setting 36 merten U motion KNX Server Installation Manual by Schneider Electric gt KNX 5 1 INTRODUCTION The following chapters will show in detail how U motion KNX Server has to be configured in order to work in a KNX system Prerequisite for creating the VISUALISATION on U motion KNX Server is a KNX project that has been programmed either with ETS3 or ETS4 The focus of the subsequent chapters is initially on how the individual data points are imported and what options for these data points are available The creation of the graphical interface of the VISUALISATION will be explained in chapter 6 Rooms 5 2 REQUIREMENTS AND EXPORT
18. desired language for the appropriate area and click on SAVE Once the storage procedure is completed the page will be refreshed and displayed in the selected language Version 1 0 0 RC 9 SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION CD Language Search results 11 Language BEN CLOSE Current language v Setup C admin English z Network frontend English zj Update Backup Restore Technologies Customization Visualisation Advanced functions Users and permissions 27 merten U motion KNX Server by Schneider Electric Installation Manual 3 3 NETWORK This page allows the configuration of the network parameters of U motion KNX Server SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION CD Network Network configuration S cLose v Setup LAN Language IP address 192 168 3 100 z Subnet mask 255 255 248 0 Update Backup Restore Gateway 192 168 0 1 Date Time Technologies DNS Customization 7 Primary DNS 192 168 5 22 Visualisation Advanced functions Secondary DNS 8 8 8 8 Users and permissions The available parameters are IP ADDRESS IP address of U motion KNX Server this address must be present in the network only once and must be compatible with the IP addresses of the other devices inside the same network if unsure please contact your network administrator SUBNET MASK If no special network configuration is used don t change the stan
19. display energy consumption in U motion KNX Server For being able to measure energy consumption appropriate KNX devices must be installed in the system and integrated in the ETS project of the system In order to configure the energy management features please access the section ENERGY within the menu TECHNOLOGIES in the configuration area of U motion KNX Server 13 2 SECTIONS The ENERGY MANAGEMENT is structured in different sections Each section is assigned to a special aspect of the energy consumption of a building CONSUMPTION This page shows a summary of the generic energy consumption and energy production photovoltaic of a building using ENERGY COUNTER objects LOADS Shows the energy consumption of configured energy loads in real time and permits to turn off on loads depending on configurable logics If you open the configuration page of the ENERGY entry the order of the different sections can be changed in EXPERT mode it is also possible to define whether a section should be visible in the VISUALISATION or not 103 U motion KNX Server Installation Manual merten by Schneider Electric SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION Version 1 0 0 RC 9 Consumption CLOSE Setup v Technologies KNX Video surveillance Name Description ETS name State Details x Consumption gt Intercom lt Solar power v Energy Consumption Solar power gt Loads
20. each aspect of the web server and visualisation can be modified VISUALISATION Visualisation area designed for being used by the final user It allows to navigate inside the single rooms pages of the visualisation which were configured in the ADMINISTRATION before and controlling KNX objects in real time Both areas are based on web technology and can therefore be controlled from within a browser window The main difference between the two levels is the graphical design The ADMINISTRATION is kept in a simple graphic style and was optimized to represent the maximum amount of information and option windows in a clear form The VISUALISATION was designed to allow the inexperienced users the most intuitive and easy navigation The high end design of the VISUALISATION makes it very comfortable for the final customer to use the visualisation Network To switch between the two areas the appropriate button in the current areas can be used From within the ADMINISTRATION it is possible to reach the VISUALISATION by clicking on the respective button in the upper right corner From within the VISUALISATION it is possible to reach the ADMINISTRATION by clicking the entry ADMIN in the upper right menu only accessible if the toolbar is extended of course the user must have the permissions to access the ADMINISTRATION further information can be found in the User manual Alternatively the two areas can be acce
21. er ee er G K This page allows modifying all settings of the selected object and its relations to other objects present in the visualisation The first part of this configuration page contains all specific settings regarding the object itself In BASE mode the following settings are accessible as also shown in the screenshot NAME Name of the object which identifies it within the software During the import process the name of the corresponding group address from the ETS project is taken over this setting can be changed here if needed GROUP ADDRESS Main group address used by the object for the communication with the KNX bus this setting can t be changed but its value can be used as keyword for the search engine FUNCTION Category to which the object belongs to the selection here determines which icons are available in the next option It is also possible to assign the object to no function if the object should not be listed inside any FUNCTIONS page in the VISUALISATION ICON In a popup window the icon can be selected through which the object will be shown in the VISUALISATION The available icons depend on the type of the KNX object and the function assigned to it If None is defined as function all icons matching the type of the KNX object will be available 48 merten U motion KNX Server by Schneider Electric Installation Manual Enabling the EXPERT mode the following additional options are availab
22. import process SYMBOL Icon for showing the object graphically inside the VISUALISATION assigned automatically by the defined ETS import rule 38 merten U motion KNX Server by Schneider Electric Installation Manual The ETS import rules are used by U motion KNX Server as follows during the import process all group addresses within the import file are scanned and for each address a KNX object is created If at least one of the keywords defined in an ETS import rule is found in the name of a KNX object U motion KNX Server checks whether the data length of this object matches the one defined in the ETS import rule TYPE If this second parameter matches the ETS import rule is applied for this KNX object For the matching KNX object the encoding defined in the ETS import rule will be applied automatically furthermore it will be assigned to the FUNCTION category defined in the ETS import rule and also it will get the symbol specified in the rule Any further editing of KNX objects which have already been customized by an ETS import rule is normally not needed what can save a lot of time All KNX objects which do not match at least one ETS import rule must be edited manually during or after the import process in order to assigning data length encoding and the icon Especially for large ETS projects with numerous group addresses it is recommended to make use of the ETS import rules since the manual configuration of the sing
23. must be adjusted before the image is uploaded to U motion KNX Server please consider the following points If you use the template BACKGROUND to visualise a room then the background image will be displayed in real size pixels without any automatic scaling the image is placed in the left upper corner If you use one of the GRID templates for the visualisation of a room then the image is scaled in order to have the optimal size at the defined position The usage of high resolution images e g HD photos has a double disadvantage on one side the upload of such big sized images to U motion KNX Server takes longer and also the first loading times increase when a room is opened inside the VISUALISATION because of the high data volumes caused by the image Furthermore when the template BACKGROUND is used to visualize a room on devices with smaller resolutions image itself only a part of the background image will be visible 6 3 INSERT OBJECTS INTO ROOMS As soon as a room was created it is possible to add objects to a room Open the target room in a new tab In the area CONTAINED OBJECTS all the objects contained in the room are listed initially empty Search the desired objects with the search function and drag them inside the area The order of the single objects can be changed by dragging the single objects using the MOVE button to the desired position for the templates GRID only LANE TULA CATH EXPER
24. objects can be added by dragging them in directly from the search function ersior SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION Y Favourites v Search results 1 Backlight 12 0 10 Thermostat KNX object ID 464 Name Description ETS name State Details X Thermostat Backlight Thermostat Backlight Off 12 0 10 4 4 OPTIONS In this configuration menu the basic customization of the VISUALISATION of U motion KNX Server can be realized 4 4 1 HOME This menu allows the customization of the graphical interface of the HOME page The HOME page may contain different information from the system the local weather forecast and different information from the created visualisation the background image is also customizable SHOW CURRENT TEMPERATURE This option embeds the local outside temperature into the HOME page the forecast information for the defined location are set in the menu WEATHER SHOW WEATHER FORECAST Enables Disables the weather forecast for the next 2 days USER WEATHER INFO AS BACKGROUND Enables Disables the adaption of the HOME page s background in dependency of the actual weather information BACKGROUND IMAGE IF NOT WEATHER Alternatively to the already mentioned options a static image can be defined as background image of the HOME page CLOSE NAVIGATION MENU AUTOMATICALLY Enables Disables the automatic closing of the navigation menu 33 merten U motion KNX Ser
25. one of the steps below e Either use an existing ENERGY COUNTER check out previous chapter and drag it into the corresponding section of the load control e Or create a new ENERGY COUNTER by using the ADD button In both cases the connected object is shown in the section ENERGY COUNTER and beneath its name also the result of an automatic control check is shown which assures that the used ENERGY COUNTER was configured correctly in order to work in combination with the load control Version 1 0 0 RC 9 SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION Load control v Search results 1 ee a T N 7 Name Load control Represenation Cycle time s 5 Seconds Z Cycles until break 3 Cycles until restart 60 Max priority value 4 Control type Active z Execution state Play Name Check X Consumption Q OK BALCI The following parameters must be configured correctly within the ENERGY COUNTER in order to be used as reference object Power value either directly or using the power calculation as seen before Minimum and maximum power limit either as static value or as sub objects Sub object priority Preferably also the sub object Load over limit should be configured which is automatically set to 1 if the logic of the load control is enabled and starts switching off loads and is set back to 0 as soon as the total load falls back under the configured limit If
26. open the desired object 1byte in a new tab e Activate the EXPERT mode e Ensure that the ETS ENCODING is set to Scaling 0 100 1byte e Configure the parameter FUNCTION to SCENARIOS If this entry should not be available change the ETS EN CODING to another value and then back to Scaling 0 100 1byte e Select an appropriate icon e Set the value for the scenario to send on the bus when it is activated in the input field VALUE KNX SCENARIO LAE TILSA CALCHI EAE Laari WERL FEN THE CLOSE era Bee f fei E Erig b CUT k Vue ae ren b LLED TE eh Once a KNX scenario is configured it will appear in the VISUALISATION as shown below mi a 6500 00g Play Update By clicking the PLAY button the value configured for the parameter VALUE KNX SCENARIO will be sent to the KNX bus and the KNX devices configured for the usage of the KNX scenario will start the actions memorized for the received val ue By clicking on UPDATE all status of the involved KNX objects are stored to the KNX devices This way you got the same possibilities inside the VISUALISATION as present in the KNX Installation for a KNX scenario also called light scene start a scenario or update a scenario 52 merten U motion KNX Server by Schneider Electric Installation Manual 5 9 PHYSICAL ADDRESS OF U MOTION KNX SERVER Through the menu CONFIGURE COMMUNICATION under TECHNOLOGIES gt
27. same as the one of the corresponding graph what permits to easily recognize it even when more than one graph is visualised Furthermore the box permits to change some options of the graphical representation of the shown data 108 merten U motion KNX Server by Schneider Electric Installation Manual SHOW Shows Hides the graph of the corresponding energy counter COMPARE Shows hides the comparison values which are calculated from the average value of the lastly measured values RANGE Shows Hides the colored area which marks the range between the minimum and maximum values of the energy counter in dependence of the selected time period The following screenshot shows an example in which the options COMPARE and RANGE have been disabled in this case only the real energy values are shown Toar Yestesda Week Last Weck Month Last Month Year asi Year Consumption Solar power Q gt lt gt 600 W 2300 W te LEJ Range The lower area of the page contains the graphs of the single energy counters batteries from the upper area The data shown in the graphs always refers to a certain time period which can be selected by the user through the different TABS on the top of the page TODAY Data of the current day from 00 00 the comparison value if enabled is calculated from the average of the daily values logged YESTERDAY Data of the previous day the comparison value if en
28. the VISUALISATION In the first case it is sufficient to input the complete address into the text box in the second case the text box can be as already seen with the CONDITIONS transformed into a drop zone using the red button and therefore an arbitrary room can be connected via drag amp drop The screenshot on the next page shows a sample configuration in which a PAGE JUMP of the CLIENT device with IP address 192 168 0 47 to the room Temperature control should take place whenever the KNX object Temperature alarm is in alarm state E ca cache EXPERT LOGOUT VISUALISATION Search results Entrance CLOSE gt Setup gt Technologies gt Customization gt Visualisation v Advanced functions gt Logics gt Conditions gt Virtual objects gt Integrators gt Notifications v Clients Users and permissions Redirect Temperature ABC 617 Temperature alarm Por e Tr browser connected to U motion KNX Server or in the case of mobile devices the connected app Otherwise o In order that the PAGE JUMP can be executed correctly the concerned CLIENT device of course must show a the PAGE JUMP is ignored 94 U motion KNX Server merten Installation Manual by Schneider Electric 12IP CAMERAS 12 1 INTRODUCTION U motion KNX Server permits to integrate the stream of one or more IP cameras videoserver within the pages of the visualisation The cameras can be reached
29. the devices that should be actively controlled by the load control logic as described before Even in this case Either a previously configured ENERGY COUNTER can be connected Or anew ENERGY COUNTER can be created using the ADD button In the same way as for the ENERGY COUNTER section also here an automatic check is done in order to control if all loads present the necessary settings If this is not the case e g when adding a new counter using the ADD button the properties window of the related counter must be opened and the missing parameters must be set Version 1 0 0 RC 9 SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION Y Load control Search results 1 Max priority value 4 hd j cZ o ciyp2 Active s gt Setup Execution state Play v Technologies KNX gt Intercom gt Consumption Name Check v Loads X Consumption Q OK Load Load Loads ADD Load Name Priority Check Load l Load X Load 1 oK Import Export Sr v OK gt Customization u Load 2 gt Visualisation SE oad 3 Q 0K Advanced functions N m Users and permissions X Load 4 Q 0K X Load 2 z ok a The required parameters are exactly the same as seen in the last chapter The only difference lies in the following 2 sub objects which are required for the single loads LOAD ON OFF Control object used by the load control logic in order
30. the graphical representation of the power values within the VISUALISATION on the other side can also be used by the load control if the ENERGY COUNTER is used for that purpose These levels define how the energy counter is shown in the VISUALISATION on the other hand they are used for the load control if the energy counter is used for that The energy counters change color depending on the shown value Measured power lt Limit 1 GREEN Limit 1 lt Measured power lt Limit 2 ORANGE Limit2 lt Measured power RED 104 merten U motion KNX Server by Schneider Electric Installation Manual GRAPHS SCALE FACTOR Permits to define a scale factor through which the representation of the selected graph can be adapted Default 1 UNIT Permits to define a measuring unit which is shown behind the energy values within the graph SHOW DATA IN GRAPH If this option is selected the data of the ENERGY COUNTER will be shown in graph form depending on the time period selected by the user check out next chapter for further details SHOW COMPARISONS _ IN If this option is selected in addition to the base graph also the calculated average GRAPH value depending on the time period selected by the user is shown SHOW RANGE IN GRAPH If this option is selected in addition to the base graph also the range between minimum and maximum value of the ENERGY COUNTER always depending on the time period selected by the user is sho
31. the object belongs Name Description ETS name The chosen TEMPLATE defines not only which icon the object should use for representation inside the VISUALISATION but also which kind of sub objects it can contain the following TEMPLATES are available DIMMER With this TEMPLATE the command ON OFF and the percent value of a KNX dimming actuator can be controlled adt Dimmer Shutters w o percentage Up On k 4 SHUTTERS With this TEMPLATE the commands UP DOWN and STOP of a shutters actuators channel can be controlled in the same object i All shutters a Down Stop k d SHUTTERS Similar to the previous object instead of the STOP function it provides a percentage UP DOWN PERCENTUAL control of the shutter position 68 merten U motion KNX Server by Schneider Electric Installation Manual SHUTTERS Permits to control the shutter position as well as the opening closing of its lamellae WITH LAMELLAE r 4 Shutters up down lamel THERMOSTAT Allows grouping of different commands and status feedbacks from KNX thermostats into one object in the VISUALISATION itself only a small icon with the key information is shown by clicking on the corresponding icon of such an object a popup window containing all objects defined as visible in the COMPLEX OBJECT will appear For different types of thermostats different templates options are available Thermostat A with
32. to turn the load on or off This can be either a KNX object of 1bit or 2bit in the first case the corresponding output is just turned on or off by U motion KNX Server with the risk that the state of the output might be changed by another sensor or another event of the software in the second case a force priority control of the output is executed which brings the following 2 advantages The state of the load can t be changed by other events e g push buttons in the installation or the VISUALISATION of U motion KNX Server ajii merten U motion KNX Server Installation Manual by Schneider Electric The base state of the object is not changed by the priority control which helps avoiding erroneous control like unwanted activation of the loads LOAD AUTO MAN If present this object permits the user to independently define through the VISUALISATION whether a load should be controlled by the load control AUTOMATIC or should permit only manual control in the second case the load control logic will not turn off on the load which can be helpful if loads should be temporarily excluded from the load control After making changes to the loads connected to a running load control it is necessary that the load control is restarted using the corresponding buttons in its properties window Only in this way the changes will be taken over 13 4 4 REPRESENTATION IN THE VISUALISATION At comp
33. visualisation in the following format 143 kW Hint This formatting affects only objects whose value is represented in textual form numbers strings not objects which are only represented through icons inside the visualisation VISIBLE Defines if the object shall be visible inside the VISUALISATION or not WRITE ACCESS ACTIVE Enables the operation of the object in the VISUALISATION through the defined graphical icon this setting is normally configured automatically during the ETS import If an object should be used only as a status display in the VISUALISATION even if in the ETS project it was basically configured with write permissions it is sufficient to disable the write access here Note To enable write access for objects which were initially imported as read only the corresponding group address with write access must be configured too detailed information can be found ahead in this manual improper settings can compromise the proper function of the system READ ACCESS ACTIVE Permits to read the current status of the object over the KNX bus this flag is always active 49 merten U motion KNX Server by Schneider Electric Installation Manual LE TULAR CALCHI EA H LOG VEHLI EEA THOE CE LA CLO Fk Sue T Teflon F Ri T ERGE cen 1200 Tie fp zu u giji SB Ira ante ee Tan Ss La 12016 Damme i 120m0 I 12k f E Ta 12026 Fi La a 1227 FB Lig
34. 1 5 Access 1 6 Administration and Visualisation Area 1 7 Reset of the IP Address 1 8 Reset to factory settings 2 General overview 2 1 2 2 2 3 2 4 2 4 1 2 4 2 2 4 3 2 4 4 2 4 5 2 4 6 2 4 7 2 4 8 2 4 9 Introduction Administration Area Interface Toolbar Navigation Menu Usage Menu Structure Setup Technologies KNX Technologies Video Surveillance Technologies Intercom Only U motion KNX Server Plus Technologies Energy Customization Customization Navigation Menu 2 4 10 Visualisation Rooms 2 4 11 Visualisation Functions 2 4 12 Visualisation Links 2 4 13 Visualisation Scenarios 2 4 14 Visualisation Complex objects 2 4 15 Advanced Functions 2 5 2 6 2 6 1 2 6 2 Search Function Workspace Overview Usage of the Tabs U motion KNX Server Installation Manual 9 9 9 10 10 10 10 11 ES 13 14 14 15 _ 15 15 16 17 17 20 90 20 91 21 51 21 21 22 FD er 23 be Die 24 25 By o 26 merten U motion KNX Server by Schneider Electric Installation Manual 2 6 3 Help 26 3 Setup 27 3 1 Introduction _ 27 3 2 Language 27 3 3 Network 28 3 4 Update 29 3 5 Backup Restore 29 3 6 Date Time 30 3 6 1 Date Time Configuration 30 3 6 2 Timezone Settings 30 3 6 3 Online Update 30 3 6 4 Scheduled Services Reboot 30 4 Cus
35. 90 merten by Schneider Electric U motion KNX Server Installation Manual Version 1 0 0 RC 9 CLEAR CACHE EXPERT LOGOUT VISUALISATION 2 Search results Alarm CLOSE TER Object properties Technologies General information gt Customization Name Alarm gt Visualisation v Advanced functions Message content Alarm gt Logics 4 gt Conditions Type Alarm z gt Virtual objects gt Integrators CLOSE v Notifications v On screen notifications Passive events gt Mail notifications ID Name Condition Action Value woman v X 615 Alarmkontakt A Notify on s Clients Users and permissions Cwe MAIL NOTIFICATIONS will always be re sent when the associated event is triggered by the corresponding object U motion KNX Server must be connected to internet in order to guarantee the MAIL NOTIFICATION functionality Since the ON SCREEN NOTIFICATIONS are visible only inside the VISUALISATION in the navigation menu of the VISUAL ISATION a corresponding icon will appear whenever new ON SCREEN NOTIFICATIONS are available C 3 lt Favourites d u ooo 000 Scenarios 000 l Intercom N Video surveillance v ng RSS news 6 Internet bookmark 9 Family board Individual NOTIFICATIONS can be consulted in a special popup window the NOTIFICATION popup window will be opened when the NOTIFICATION icon in the navigation menu of the VISUALISATION is clicked 91 merten
36. LOSE z CI 13 3 2 REPRESENTATION IN THE VISUALISATION In the VISUALISATION it is possible to access the consumption values by selecting the entries ENERGY gt CONSUMPTION from the NAVIGATION MENU Yesterday Week Last Week Month Last Month Year Last Year Consumption Solar power Q gt lt gt 600 W 2300 W Consumption E 0807 W Solar power 12404 33 W 3000 2500 2000 1500 1000 500 In the upper area of the page one or more ENERGY COUNTER are shown They show the current power consumption in real time The color green orange red of the power value indicates graphically when the configured limits are 107 merten by Schneider Electric U motion KNX Server Installation Manual exceeded If the limits were not configured in a static way but using sub objects you can click on one ENERGY COUNTER to open the following pop up window which provides the possibility to change the limits gives access to the configurable parameters which are organized in different TABS The sub objects are if present arranged in the following tabs e Load control priority load over limit Power min and max limits Energy min and max limits In each ENERGY COUNTER a colored box can be seen which allows the visualisation in graphical way of the data of the connected ENERGY COUNTER The graphs are shown in the lower part of the page Consumption 600 W The color of the box is the
37. MPLEX OBJECT offers Search for the desired objects with the search function and pull them inside the area drag and drop Each object must be assigned to the corresponding function of the COMPLEX OBJECT In the parameter FUNCTIONALITY the corresponding function for an object can be selected the available functions will depend on the objects type for example if a 2 byte temperature value was added you could select only between the functionality Measured temperature or one of the set point functionalities but not the operating mode since it is either a 1byte or different 1bit objects The entry in the column FUNCTIONALITY also defines the graphical aspect of the related sub object Naturally it is still possible to change the function of the sub object also in a second moment in this case also the visualisation within the complex object will change By re changing the entry of the column FUNCTIONALITY of the selected sub object also the graphical aspect of the sub object will change again It is furthermore possible to add sub objects to a complex object directly through an ADD button in the wD section of the contained objects This will create a VIRTUAL OBJECT check out chapter 11 4 for details and connect it with the complex object The graphical aspect of the new sub object can be defined directly through the entry within the column FUNCTIONALITY Since this objects are virtual objects they will not s
38. NEW ADD Allows the creation of a new object within the selected entry Depending on the selected item different types of objects are created if a menu allows the creation of multiple types of objects then a context menu will be displayed in order to select the object type to create DELETE Deletes the selected entry from the project EDIT Allows editing of the selected entry though the appropriate configuration window which will be opened automatically by clicking this button CLONE Creates an identical copy of the object 217 merten U motion KNX Server by Schneider Electric Installation Manual When an object is cloned not only the objects itself is duplicated but also all of its connections relations with other objects This means that the cloned object will be contained in the same rooms logics scenarios etc as the original object is Therefore after the creation of a cloned object all relations and connections should be checked and if necessary corrected dmo Note if the original object was present in a room with BACKGROUND view the cloned object will be positioned AT THE SAME PLACE in the room and will cover the original object In this case please edit the BACKGROUND view and place the cloned object in a different position If the selected entry supports the EDIT action 3 points will be displayed on the right side of the entry Clicking on these points has the same effect as clicking on the
39. NTRODUCTION In this chapter the user management of U motion KNX Server is explained and the possibilities of personalization of each user are presented which allow a safe and convenient use of the VISUALISATION 14 2 USERS AND USER GROUPS The authentication on U motion KNX Server is defined through 2 different object types USER these objects represent the accounts for accessing the VISUALISATION the authentication is done by entering user name and password configured for each USER in U motion KNX Server Every USER must belong to a USER GROUP so that they get certain access permissions for example see the whole VISUALISATION but no access to the ADMINISTRATION area USER GROUP A USER GROUP has several access permissions assigned Each USER of a USER GROUP automatically gets the access permissions defined for the USER GROUP 14 3 CREATE NEW USERS In order to create a new user proceed as listed below Open the ADMINISTRATION area e Select USERS AND PERMISSIONS USERS Click the ADD button ofig merten U motion KNX Server by Schneider Electric Installation Manual The following settings will be available for each USER NAME Identifies the USER inside the U motion KNX Server database not used for the login USERNAME Username for the authentication on the system must consist of alphanumeric characters only PASSWORD Password for the authentication on the system must consist of a
40. OF THE ETS PROJECT U motion KNX Server allows the import of KNX projects that have been realized with ETS3 or ETS4 U motion KNX Server automatically takes over the structure and functionality of the single group addresses contained in the ETS project the entire import process only takes a few minutes To import a ETS project into U motion KNX Server it is required that the project is available in a compatible format 5 2 1 OPC IMPORT With the OPC export of ETS it is possible to create a compatible project file directly out of ETS This file can be used to import the needed information of the ETS project into U motion KNX Server e Open the ETS software e Open the desired project which should be imported into U motion KNX Server e Execute the OPC export to create a file with the ending esf ETS3 Data exchange gt Export to OPC SERVER ETS4 Extras gt OPC export a7 merten U motion KNX Server by Schneider Electric Installation Manual 5 3 ETS IMPORT RULES Before the KNX project is imported into U motion KNX Server you should just think about the usage of the ETS import rules The administration of the ETS import rules can be found in the ADMINISTRATION of U motion KNX Server under TECHNOLOGIES gt KNX TEL Suis Ei EART Bau ESTER To Eo IMEE I eae ir Faje 1E m te eis i re Fun hl TO tebg ir rec Ea De urn The ETS import rules automate the import process by assigning function and gra
41. ON by adding objects to the single rooms can be found in the appropriate chapter of this manual The list LINKED SCENARIOS shows all the created scenarios that contain the current object more information about the scenarios can be found in the corresponding chapter of this manual 5 7 4 ACTIVE AND PASSIVE EVENTS The last two sections of the KNX objects configuration page allow the creation of events which can offer the following actions Change status of the current object in dependency of another object status PASSIVE Change status of another object in dependency of the current object status ACTIVE To create a passive or active event the following steps are necessary Search for the objects that should interact with the current object Drag the desired objects into the corresponding area ACTIVE EVENTS or PASSIVE EVENTS and drop them there For each created event the following settings are available CONDITION Determines the state of the object for which the event should be triggered depending on the type of the object different statuses are available The selection Every status change means that the event will be triggered at any status change of the reference object ACTION Depending on the type of the object different actions can be selected If a KNX object is selected normally you can only choose between Write write a command on the KNX bus or Read send a status request to the KNX bus fo
42. T LODE VERA EEA TH i Search erun ih i E ga u FE Lippe A Er FE Lagha E FE Lipi i i ma ar FE Liste D Fr we Lig LOS igh ddir Light prena 1 Er Bar CI Per Te oa Of course it is also possible to remove objects from a room Simply press the DELETE button of an object in the list and the object is removed from the room however this DOES NOT delete the object from the project oo All sub rooms contained in a parent room are listed in the same area as all the other objects Such sub rooms are not visible in the VISUALISATION of rooms displayed with a template of type GRID and are only shown in the navigation menu of the VISUALISATION 62 merten U motion KNX Server by Schneider Electric Installation Manual 6 4 DELETING ROOMS To delete a room the desired room must be selected through the search engine or the ADMINISTRATION menu and then the DELETE button must be pressed just as any other object is deleted in U motion KNX Server Deleting a room does not delete the object contained in that room they still remain available in the U motion KNX Server database and for example in the pages of the FUNCTIONS menu 6 5 CUSTOMIZING THE BACKGROUND VIEW The personalization of a room with the configured template BACKGROUND is done directly within the VISUALISATION If the user has the necessary permissions there will be an icon called EDIT PLAN in the toolbar through which t
43. T Level Message R Date R gt Virtual objects gt Integrators ms 2001 01 03 13 46 0 This is an Alarm v Notifications 2001 01 03 13 46 3 This is a Warning 2014 04 17 13 49 On screen notifications Mail notifications x 2001 01 03 13 46 4 This is an information bs 2001 01 03 13 46 4 This is an information 2014 04 17 13 49 Clients 41 x Sm im ma SAA i gt Users and permissions 2001 01 03 13 45 3 This is a Warning 2001 01 03 13 45 0 This is an Alarm 92 merten U motion KNX Server Installation Manual by Schneider Electric For each message the trigger time is displayed and the time at which the message has been read In addition it is possi ble to change the status of a message from READ to UNREAD or from UNREAD to READ through the correspond ing checkbox A date based filter function allows filtering certain messages Simply enter the start and end dates for the period of inter est and update the result using the UPDATE button The resulting messages in the lists can then be exported to a CSV file Filter the the messages of the desired time period and then export them into CSV file by using the button EXPORT AS CSV 11 7 CLIENTS AND PAGE JUMPS For each device connecting to U motion KNX Server via browser access including U motion KNX Server itself an object of the type CLIENT is created within the software and automatically gets the IP address of the corresponding client device as name These objects ar
44. TE STOPPABLE If you activate this option the SCENARIO can be stopped again after it has been started this only applies to scenarios with wait commands ENABLE PIN CONTROL Whit this option the room can be PIN protected To enable the PIN protection the PIN NEW PIN has to be inserted into the field NEW PIN and in REPEAT NEW PIN REPEAT NEW PIN 76 merten by Schneider Electric U motion KNX Server Installation Manual BASE LOGOUT VISUALISATION Version 1 0 0 RC 9 CD SAVE CLEAR CACHE New Scenario 6 Bas use New Scenario 6 CLOSE gt Setup Technologies General information gt Customization Name New Scenario 6 v Visualisation gt Rooms Description Functions Iterations 1 gt Links Rendering v Scenarios 2 006 000 Scenario dooropener Sprinkler sequence Enable learn function Virtual_INIT Good night IDEE rnepresenaton Good morning Function None Z L Complex objects Advanced functions Permissions Users and permissions Visible z Stoppable v Execute at startup Enable PIN control New PIN BLC All SCENARIOS will be automatically included in the corresponding page of the VISUALISATION which is accessible from the navigation menu of course the single SCENARIOS can also be inserted into different rooms 9 3 ADD ACTIONS TO A SCENARIO In order to add actions to a created SCENARIO proceed as follows Open the
45. U motion U motion KNX Server U motion KNX Server Plus Installation Manual Art no MEG6501 0001 MEG6501 0002 04 2014 VERSION 1 0 1 www merten com merten by Schneider Electric merten U motion KNX Server by Schneider Electric Installation Manual GENERAL INFORMATION Schneider Electric GmbH c o Merten Gothaer Stra e 29 40880 Ratingen www merten com www merten austria at Customer care centre Phone 49 2102 404 6000 Operating instructions manuals and software are protected by copyright All rights are reserved Copying multiplication translation and conversion either partially or as a whole is not permitted You are allowed to make a single copy for backup purposes Note please read the manual before beginning and keep the manual for later use Audience the manual has been conceived and written for users who are experienced in the use of PCs and automation technology CONVENTIONS KEY Keys that are to be pressed by the user are given in square brackets e g CTRL or DEL Courier On screen messages are given in the Courier font e g C gt Courier bold input to be made by the user are given in Courier bold e g C gt DIR double quotes Names of buttons to be pressed menus or other onscreen elements and product names are given within double quotes e g Configuration Symbolic In this manual the following symbolic are used to indicate particular text blocs Caution A danger
46. WAIT COMMAND The configuration window of a WAIT COMMAND permits to configure HOURS MINUTES and SECONDS through which the desired delay can be created Please fill in only integer values furthermore the overall time must be between 1 second minimum delay and 23 hours 59 minutes 59 seconds maximum delay GETS c car cache EXPERT LOGOUT VISUALISATION Wait for 1 Second v Search results 20 Wait for 1 Second CLOSE Wart command ID 223 Wait for 10 seconds Wait 12 hours Wait 15 minutes N Wait for 1 Second Wait for 15 seconds Hours 0 Wait for 1 hour Minutes 10 Wart for 1 minute Seconds 0 Wart for 1 second Wart 20 minutes Wait for 20 seconds Rendering Wart 24 hours Wart 2 hours CLOSE Wart 2 minutes Wait 2 seconds Wart 30 minutes Penn Wait 30 seconds Wait 3 hours Wait 5 minutes gt Menu ne Gr The configuration window also gives you an overview in which scenarios the current WAIT COMMAND is included Please do not use this area to add the command to further scenarios Instead always drag the WAIT COMMAND into the configuration page of the scenario The WAIT COMMANDS can also be integrated into the visualisation into rooms as well as into complex objects This has the advantage that also the final user will be able to change the value of the WAIT COMMAND without needing the permission to access the ADMINISTRATION The following screenshot shows the representation of a WAIT COMMAND in
47. a room with GRID view A When WAIT COMMANDS are added to the VISUALISATION it is even more important that you only work with Te CLONED objects Otherwise there is the risk that the final user unintentionally changes also the way other functions scenarios work 80 U motion KNX Server Installation Manual U motion KNX Server Installation Manual merten by Schneider Electric 10 LINKS 10 1 INTRODUCTION Objects of type LINK permit to create page jumps within the visualisation of U motion KNX Server It is possible to call as well pages of the visualisation rooms as also links to other web servers or web pages which are in the connection di rectly accessible without having to use the navigation menu 10 2 CREATION OF LINKS In order to create a new link Open the ADMINISTRATION area of U motion KNX Server e In the navigation menu choose VISUALISATION LINKS Press the ADD button 81 merten by Schneider Electric U motion KNX Server Installation Manual The new created LINK will appear in the navigation menu and can be opened in a new tab for configuration Version 1 0 0 RC 9 EXPERT LOGOUT VISUALISATION gt Setup Technologies gt Customization v Visualisation gt Rooms Functions v Links lt New Link 1 Scenarios Complex objects Advanced functions Users and permissions wr Apartment Apartment Object properties Ge
48. abled is calculated from the average of the values logged the previous day WEEK Data of the current week from Monday 00 00 the comparison value if enabled is calculated from the average of the weekly values logged LAST WEEK Data of the previous week the comparison value if enabled is calculated from the average of the values logged the previous week MONTH Data of the current moth from the first day 00 00 the comparison value if enabled is calculated from the average of the monthly values logged LAST MONTH Data of the previous month the comparison value if enabled is calculated from the average of the values logged the previous month YEAR Data of the current year from the first day 00 00 the comparison value if enabled is calculated from the average of the yearly values logged LAST YEAR Data of the previous year the comparison value if enabled is calculated from the average of the values logged the previous year 109 merten U motion KNX Server by Schneider Electric Installation Manual The following screenshot explains the different areas oft he energy graph Legend with total power consumption of the corresponding time period nn gy data nn Average of Range of i e a INJ _ the corresponding the corresponding a time period time period In order to change the order of the ENERGY COUNTERS in which they are shown within the section CONSUMPTION please follo
49. added group address is mentioned for refreshing the status of the object Disable the search filter The order of the linked KNX group address is extremely important Only the first group address is used to DD create the graphical information related to the object It must therefore be ensured that the main group address from which the object has been created during the ETS import is at the first place in the list If this is not the case the order of the linked group addresses can be changed by dragging the single group addresses with the MOVE button to the desired position 50 merten U motion KNX Server by Schneider Electric Installation Manual 5 7 3 ROOMS AND CONNECTED SCENARIOS The section ROOMS TO WHICH THE OBJECT BELONGS includes all rooms of the software in which the object is visible and accessible through the VISUALISATION An object can exist in several rooms but also in none after the first ETS import an object belongs to no room since the single rooms have to be created before an object can be assigned to them If some rooms are already configured the object can be assigned to a room by searching the desired room through the search function and pull it into the list ROOMS TO WHICH THE OBJECT BELONGS of the object drag and drop The other way around it is also possible to use the configuration page of a room to add the individual KNX objects more information about configuring the VISUALISATI
50. all hidden menu items are displayed semi transparent and are not visible in the navigation menu Menu items of the system itself can t be deleted but only hidden To change the position of a menu item it can be moved through drag and drop using the grey ORDER button as already explained for other objects It s also possible to add rooms to the navigation menu so that they are directly accessible from the navigation menu and the HOME page This can be done by searching the desired room with the search function and pulling them into the list drag and drop Once the visualisation is refreshed the changes made in the navigation menu will be visible 4 3 FAVOURITES All objects that in the visualisation have been identified as FAVOURITES can be managed here On delivery this list is empty The end user can define various objects in the VISUALISATION as FAVOURITES on his own which results that the defined objects will be automatically included in the list shown below The FAVOURITES are reachable either through the navigation menu or through the HOME page eee merten U motion KNX Server by Schneider Electric Installation Manual In this configuration window the list with the favourites can be modified Objects can be deleted from the list with the DELETE button The order of the single objects can be changed by dragging them using the grey ORDER button to the desired position in the list and dropping them there o New
51. ally results in a correctly functioning and always refreshed visualisation If manual changes to the relations between KNX objects and group addresses have been performed in the U motion KNX Server database it is better to disable this option otherwise all manual changes will be overwritten More details about modifying relations between KNX objects and group addresses can be found in the following chapter SELECTIVE IMPORT This option allows to select the single group addresses to import Note This option is enabled automatically when the ETS project to be imported contains more group addresses than the license of U motion KNX Server allows The EXPERT mode shows additional options for the ETS import REMOVE NONEXISTING KNX OBJECTS If this option is enabled all previously imported KNX objects that aren t present in the new ETS project anymore will be deleted from the U motion KNX Server database REFRESH NAMES If an existing U motion KNX Server database is updated two options define REFRESH ETS FLAGS whether the names and the read write flags of the KNX objects within this database should be adapted to the new names and flags from the ETS project or not These options should not be enabled if there have been made changes on KNX objects in the U motion KNX Server database independently from ETS project COMMUNICATION INTERFACE The interface through which U motion KNX Server communicates with the imported KNX gr
52. anual 2 22
53. apter 2 5 for further information about the search function Drag the selected room inside the configuration window of the navigation menu and drop it there In this way rooms can directly be added into the navigation menu and so they are visible in the home screen inside the navigation menu and also directly in the main page of the VISUALISATION if this option is active Furthermore any 91 merten U motion KNX Server Installation Manual by Schneider Electric system entry access which is not desired can be easily hidden from the navigation menu in this way the VISUALISATION can be directly adapted to the customer s needs 2 4 10 VISUALISATION ROOMS This section allows the configuration of the rooms inside the visualisation This section is initially empty and allows the creation of new rooms from a technical point of view objects of type GROUP which can contain other rooms or other objects supported by U motion KNX Server For each room a so called Template can be selected Depending on the selected THEME different Templates are available Currently the following Templates are available BACKGROUND Background image photo graphic rendering plan on which the single control objects are positioned Clicking on such a control object it either sends the related command on the KNX bus or opens a box containing further control options GRID Shows the contained objects in table form Depending on the type of obje
54. arameters IP address 192 168 0 110 Port 3671 E NAT mode 55 merten by Schneider Electric U motion KNX Server Installation Manual After confirming through OK the connection will be shown in the area Configured connections Please select the created connection and click on TEST in order to check the connectivity at positive result click on Select in order to use U motion KNX Server as active interface Ei eTs4 Quick Actions p Change Database New Project O New Project Assistant z Diagnostics Device Info Individual Addresses Unload Device Bus Monitoring Group Monitoring Tool Diagnostics Import Data Me imp Import Projects Import Products Help Database Software Updates Troubleshooting Import Export Shortcuts ETS Apps Labels Online Catalog Ei Catalogs Database Settings Use project connection if available Use direct KNX IP connection if available Currently selected U motion u U motion 192 168 0 110 IP address 192 168 0 110 MAC address 00 00 00 00 00 00 Test a KNX Select Local settings New Delete Edit o The gateway function of U motion KNX Server can only be MONITOR the diagnostic function BUS MONITOR requires a direct connection to the bus This is valid for ETS3 as well as for ETS4 used with the diagnostic function GROUP 56 merten U motion KNX Server by
55. area ACTIONS EXECUTED FROM THE SCENARIO Search the desired objects with the search function and pull them inside the list drag amp drop For each object dragged in the list the appropriate ACTION and if necessary the corresponding VALUE can be defined For KNX objects as ACTION can be chosen between Read and Write Read will send a status request for the corresponding group address on the KNX bus Write sends the configured VALUE as command on the corresponding group address on the KNX bus 71 merten by Schneider Electric An example of a SCENARIO with defined actions can be seen in the following screenshot General lighting switch 5 2 6 i Light A 5 0 1 Light A state 5 0 20 Light B 5 0 2 Light B state 5 0 22 ro ae ID 338 S03 Light C state 5 0 23 Light D 5 0 4 Light D state 5 0 24 Light E JE Light E state 5 0 25 Light F 5 0 6 Light F state 5 0 26 Light G 5 0 7 Light G state 5 0 27 Light H 5 0 8 Light H state 5 0 28 Light 5 0 9 Lacs Version 1 0 0RC 9 New Scenario 6 Name Rendering Represenation Function Permissions Visible Execute at startup CLOSE Name Actions executed fro Name X Light C gt X Shutter B long New Scenario 6 None nt n ine scenarlo SAVE CLEAR CACHE EXPERT Description ETS name Action Write Write 9 4 SCENARIOS WITH WAIT COMMANDS It is possibl
56. ast an object of type date or time is available U motion KNX Server can be configured to send these values automatically on the bus to synchronize other devices with its date and time 3 6 2 TIMEZONE SETTINGS Allows configuring the time zone in which U motion KNX Server is located 3 6 3 ONLINE UPDATE Allows defining a time server and a time interval to update automatically the system time if no special settings are required it is recommended to use the default settings 3 6 4 SCHEDULED SERVICES REBOOT Provides an automatic restart of the services running on U motion KNX Server in the background week day and time for the automatic restart of the services can be configured here Normally the automatic restart of the services is not required therefore it is recommended to not change the factory settings 30 merten by Schneider Electric U motion KNX Server Installation Manual 4 CUSTOMIZATION 4 1 THEMES U motion KNX Server offers different themes for changing the design of the VISUALISATION in this page one can choose which theme should be used for the VISUALISATION of U motion KNX Server Version 1 0 0 RC 10 SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION T Themes een BEE once Themes Setup Technologies Dr v Customization o Navigation menu Favourites Options Peay Pas ee SCHNEIDER v Visualisation vw Rooms v New Room 1 Functions Links Scenarios
57. ation Manual Version 1 0 0 RC 9 SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION CD Y New Condition 1 ZZ ED CLOSE Setup Technologies gt Customization Name New Condition 1 gt Visualisation v Advanced functions a Logics E a a v Conditions Reference object i Outside temperature L u E OS mT p Virtual obiects Condition All values in the range excluded upper bound and lowe gt Integrators 10 A Notifications PR E E ee we Clients 20 O Users and permissions CLOSE Name Description ETS name Name Condition Action Value DCI At every change of the reference object or comparison object if present the condition will be evaluated and the connected actions will take place The action in case of CONDITIONS always have to be ACTIVE EVENTS and are configured in the same way as already mentioned a few time within this manual drag and drop of the objects to be controlled directly from the search results 11 4 VIRTUAL OBJECTS The VIRTUAL OBJECTS are objects that exist only in the U motion KNX Server software These objects can be handled the same way as KNX objects with the difference that VIRTUAL OBJECTS have no direct connection to the KNX bus no KNX group addresses is connected to these objects These objects can be used for various tasks storing values entering values for comparisons displaying special status etc Since VIRTUAL OBJECTS are not included in the count of g
58. ayout e g thermostats complex objects are handled inside the VISUALISATION just like any other object of the VISUALISATION 8 2 CREATE COMPLEX OBJECTS To create a COMPLEX OBJECT the procedure is identical as the creation of any other object in the software Open the ADMINISTRATION area and select VISUALISATION COMPLEX OBJECTS Press the ADD button Afterwards open a new tab with the configuration page of the new created COMPLEX OBJECT The following settings will be available NAME Name of the COMPLEX OBJECT TEMPLATE Graphical icon used to display the COMPLEX OBJECT inside the VISUALISATION FUNCTION Function assigned to the COMPLEX OBJECT optional 67 merten U motion KNX Server Installation Manual by Schneider Electric Version 1 0 0 RC 9 SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION Dimmer gt A Search results 9 Dimmer CLOSE gt Setup Object properties Technologies General information Customization Name Dimmer v Visualisation Rooms ge Represenation Links Template Dimmer generic Scenarios v Complex objects None z Blinds Blinds Advanced functions Objects contained in the complex object AD Users and permissions Name Details Label Visible Functionality Scheduling X Dimmer on off 12 0 16 7 Generic On Off Dimmervalue 12 0 14 7 Brightness value Rooms to which
59. ct it can be controlled directly by clicking on the related buttons of the object or a pop up window is opened with additional controls when the object is clicked Image FULLSCREEN ON TOP The grid may also include an image file that is positioned depending on the selected template ON RIGHT ON LEFT Ifthe entry ROOMS is selected directly and its configuration window is opened by clicking on the EDIT button the order of the contained rooms can be changed Since this group belongs to the system no other settings are available 2 4 11 VISUALISATION FUNCTIONS This section allows the organization of the FUNCTIONS which group the KNX objects automatically based on their typology If an object is for example linked with the FUNCTION Illumination it is automatically copied into the group Illumination of the FUNCTIONS This group can be called directly in the VISUALISATION providing quick access to the objects of the same typology After activating the EXPERT mode see chapter 2 3 through the appropriate button in the toolbar for each FUNCTION it can be defined whether it should be visible in the VISUALISATION or not SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION CLOSE Burmnation 22 merten U motion KNX Server by Schneider Electric Installation Manual Furthermore the order of the single entries can be changed Click on the grey ORDER button of an entry drag it up or down to the de
60. ct port 80 for the HTTP protocol or 443 for the HTTPS protocol except the camera is using a special configuration PROTOCOL Please select HTTP or HTTPS depending on the port number specified before normally HTTP MAX FPS Enter here the maximal frame rate frames per second that should be used for the VISUALISATION of the video image APPEARANCE IN PLANVIEW Camera objects can also be used in rooms With this setting can be defined how a camera object should be shown inside a room in BACKGROUND mode e ICON The camera is shown only as icon if the icon is clicked the video stream is shown in a popup window PREVIEW The camera object is shown as window with the video stream inside Like a preview the size can be adapted as needed If you click inside the video window a popup window with the video stream inside will be opened 12 5 GENERIC VIDEO FORMAT JPG U motion KNX Server at last offers the possibility to request single JPG images from an IP camera videoserver In this case U motion KNX Server refreshes the images automatically at the maximum speed allowed by the network and creates its own video stream the next image will be loaded as soon as the current image finished loading This method even if not so performant and fluid as the methods described before has the great advantage of its universal usage the camera videoserver must only offer a path to the still image of its video signal Furthermore thi
61. d xe Note if the original object was present in a room with BACKGROUND view the cloned object will be positioned AT THE SAME PLACE in the room and will cover the original object In this case please edit the BACKGROUND view and place the cloned object in a different position 2 6 WORKSPACE 2 6 1 OVERVIEW The WORKSPACE is the working surface of the ADMINISTRATION area It offers the possibility to open several configuration windows at the same time in different tabs The configuration window of a selected entry will be opened when the EDIT action either the 3 points of the selected entry or the EDIT button in the TOOLBAR is executed 25 merten by Schneider Electric 2 6 2 USAGE OF THE TABS U motion KNX Server Installation Manual All opened tabs are displayed in the TAB BAR of in the upper area of the WORKSPACE gt Piysical aadress KHE PPri ies oT ae CLOG T If a large number of tabs is opened they are not all represented in the TAB BAR The hidden tabs can be accessed through the button at the right end of the TAB BAR which on click shows a complete list of all opened tabs To close an opened tab move the mouse pointer on the tab title and close the tab through the appearing X icon If there are present any unsaved changes in the tab you will be informed about it before the tab is closed in order to avoid data loss 2 6 3 HELP A click on the help button opens a p
62. d which can be used for Intercom communication USER Here are all user objects listed which can be used for Intercom communication SETTINGS Generic parameters of the SIP server configuration 2 4 7 TECHNOLOGIES ENERGY This section allows monitoring and control loads CONSUMPTION Representation of the energy consumption of loads even in graphical form LOADS Control of loads depending on the overall power consumption power consumption optimization IMPORT EXPORT Import Export of recorded data 2 4 8 CUSTOMIZATION This section contains the following entries THEMES Permits to change the design theme of the VISUALISATION NAVIGATION MENU Permits to personalize the navigation menu of the VISUALISATION FAVOURITES Permits to change the favourites page of the VISUALISATION OPTIONS Allows the configuration of several aspects plugins of the VISUALISATION Further information about customization can be found in chapter 4 of this manual 2 4 9 CUSTOMIZATION NAVIGATION MENU This entry permits to customize the navigation menu of the VISUALISATION area Existing entries can be hidden only possible in EXPERT mode and also rooms see next section can be added to the navigation menu Therefore proceed as described below Open the settings window of the entry NAVIGATION MENU by clicking the 3 points or the EDIT button Search the desired room by using the search function see ch
63. dard value 255 255 255 0 GATEWAY Enter the IP address of your router if present or the referenced server of the network if unsure please contact your network administrator NOTE in order to guarantee remote access to U motion KNX Server you must enter the IP address of the Internet router through which you want to access the web server For more details see the appropriate section of this manual PRIMARY DNS DNS addresses over which U motion KNX Server can access the internet if available SECONDARY DNS If no connection is possible with the default addresses please contact your network administrator After modifying the single parameters please click on SAVE If the IP address was changed the new IP address must be entered in the address bar of the browser for reconnecting with the webserver Please ensure that all entered data is correct before you save them If incorrect settings are saved U motion KNX Server will probably be no longer accessible through the network 28 merten U motion KNX Server by Schneider Electric Installation Manual 3 4 UPDATE This menu permits to update the software version of U motion KNX Server please use only official update packages published by the manufacturer in order to avoid malfunctions To update U motion KNX Server please proceed as follows Save the update package downloaded from homepage or received via mail on your PC without unpacking it Open
64. device over which it can be called from another place like other client devices or eve IP phones If this parameter is configured the button UPDATE CONF must be clicked in order to save the changes THIS FUNCTIONALITY CAN ONLY BE USED IN COMBINATION WITH U motion KNX 93 merten U motion KNX Server by Schneider Electric Installation Manual Server Plus Further information can be found in the INTERCOM manual of U motion KNX Server If the EXPERT mode is enabled the visibility of the CLIENT object can also be set to true in order to distinguish it from the non used unimportant CLIENT devices The CLIENT object can furthermore be used to trigger different actions in dependency of configurable events within the software Execute a PAGE JUMP either to a room of the VISUALISATION or to an external web page on the selected CLIENT device In order to configure those actions please follow the steps below Drag the object that should be triggering the action like for example a KNX object into the section PASSIVE EVENTS Define the CONDITION for which the action should be executed the selectable values depend on the type of the connected object e The action will automatically set to REDIRECT PAGE JUMP In the column VALUE the following possibilities will be given Inserting the URL of an external web page e g a homepage web server contents e Selecting a room of
65. e VISIBLE Sets the object visible in the VISUALISATION or not WRITE ACCESS ACTIVE Enables the commanding of the object in the VISUALISATION if it is disabled it shows only the status of the object ENABLE PIN CONTROL Whit this option the room can be PIN protected To enable NEW PIN the PIN protection the PIN has to be inserted into the field NEW PIN and in REPEAT NEW PIN REPEAT NEW PIN 11 5 INTEGRATORS The INTEGRATORS enable the calculation of the time integral of objects present in the U motion KNX Server database For example it is possible to calculate for how long a certain light was in the status ON the result of such an INTEGRA TOR would be the time period in seconds for which the light was powered on To create a new INTEGRATOR simply open the ADMINISTRATION menu select ADVANCED FUNCTIONS VIRTUAL OBJECTS and click on the ADD button The newly created INTEGRATOR provides the following options MEASURING UNIT The measuring unit for the calculation displayed also in the VISUALISATION can be entered here ICON The icon which will represent the object inside the VISUALISATION can be selected here SCALE FACTOR The value obtained from the object is multiplied by this factor 1 should be entered here if no scaling of the obtained value in the calculation of the integral is desired or if you just want to obtain the time period in seconds as result of the integral Note When for th
66. e action should be triggered at every evaluation of the logic please select Every status change ACTION Action to execute on the object differs depending on the type of the object VALUE Value to which the object will be set when the condition is fulfilled if for the parameter ACTION the corresponding option is selected and the object supports this functionality If for the condition the option Every status change is selected the output object can be set to the same value as the result of the evaluation of the LOGIC Value of or also to its inverted value Inverted value of 85 merten by Schneider Electric Search results 7 gt Setup Technologies gt Customization gt Visualisation v Advanced functions v Logics Logic motion detection Conditions gt Virtual objects Integrators Notifications Version 1 0 0 RC 9 New Logic 1 Object properties General information Name Logic Logic CLOSE Connected rooms Name Logic Inputs Clients gt Users and permissions ID Name X 336 LightB X 334 Light A Logic Outputs Name Below an example showing how a scenario is launched through a LOGIC New Logic 1 334 AND 336 Description ETS name Condition EXPERT Action U LOGOUT VISUALISATION Value motion KNX Server Installation Manual m X Sprinkler sequence If Logic True E
67. e b Workspaces 0 Settore dorsale Hauptbereich b Project Log Book tt 1 Hauptbereich b Todo Items b Pending Operations b Undo History Download Export Group Addresses Import Group Addresses Get Object Description from Add to Favorites Add Middle Groups Delete Name m Pass Through Line Coupl Dynamic Fola Properties Alt Enter KNXcontrol N No 12 DIVUS GmbH 12 0 KNXcontrol Messe Paneel Middle Groups p 0 0 vr test 0 0 0 GE 1 1 Hauptlinie 12 DIVUS GmbH Last active workspace ACmdf Er In the pop up window please select CSV and set the following parameters as shown in the screenshot on the next page o As CSV format select 2 columns 1 1 Name Address o As CSV separator select Tabulator 46 merten by Schneider Electric Output format DXML CSV CSV format 3 1 three columns Main Middle Sub group separated 5 1 3 Group address name Main Middle Sub group 1 1 Name Address O 3 3 Main Middle Sub group name Main Middle Sub group address El Export with header line CSV separator Tabulator O Comma D Semicolon Export file name U motion KNX Server Installation Manual After the successful creation of the file please select ETS IMPORT from the KNX section in the administration menu and load the file in the same way as described for the ETS import fava Ciit alee ARAN rau ne ETS impri nee i C
68. e can t display any graphical contents FF Within this manual the denomination U motion KNX Server references to both products U motion KNX Serv D er and U motion KNX Server Plus if not named differently in the corresponding text The differences between the 2 server versions can be found in the corresponding datasheets available separately U motion KNX Server Installation Manual merten by Schneider Electric 1 3 INSTALLATION CONNECTION AND COMMISSIONING 1 3 1 INSTALLATION AND CONNECTION U motion KNX Server is like most KNX components mounted on a DIN rail For a correct function the following connections must be guaranteed Power supply 12V 24V DC current consumption 240 mA a 12V using the supplied connector KNX bus connection via supplied connector Network connection via CAT5 network cable The LED marked with the label POWER on the front of the server signals that the power supply is active while the SERVICE LED remains off in normal circumstances U motion KNX Server has furthermore the following interfaces SD slot to expand the memory of U motion KNX Server with an appropriate SD card za Hint The actual software version doesn t support the SD slot Hint the connection to the KNX bus is not really needed for the configuration of U motion KNX Server but it D allows a more efficient programming since direct tests of the system can be performed When commissioning U motion KNX Server t
69. e pairwise At start the first two objects with the specified operator AND OR will be evaluated Then the results of this evaluation will be evaluated with the defined operator AND OR with the third object and so on The logical expression must be created by entering the objects ID concatenated among each other with a logical operator AND OR all separated by a blank space the logical operators must be written in capital letters In order to invert an input object the operator NOT must be written directly before the ID of the corresponding object separated from the objects ID through a blank space this operator must be written in capital letters too Once a logical expression is configured in the LOGIC at least one output object must be defined in the list LOGIC OUTPUTS otherwise the LOGIC will have no effect At every status change of one of the defined input objects the corresponding logical expression is evaluated and the defined output objects are set to the corresponding state To add new objects into the area LOGIC OUTPUTS simply locate the desired objects with the search function and pull them into the area drag and drop Once all required objects are in the list the actions to be performed for each object depending on the result of the evaluated logic expression can be defined CONDITION Evaluation of the result of the logical expression If LOGIC TRUE or If LOGIC FALSE If th
70. e scale factor a decimal number is used please use a dot as separa tor TYPE OF DATA Defines if the result of the integral will be shown as numeric value with Real or without Integer comma Once all settings have been made the object whose value should be used to calculate the time integral must be speci fied Simply open the search function locate the desired object and pull it into the area INPUT OBJECT OF THE INTE GRATOR drag and drop a Only one object can be inserted into the list INPUT OBJECT OF THE INTEGRATOR since each INTEGRATOR DD can integrate only one value and not several values if nevertheless is tried to add more objects into the area a corresponding error message will appear Not all objects can be used for the calculation of an integral if not compatible objects are pulled into the area INPUT OBJECT OF THE INTEGRATOR an error message will appear For KNX objects it must be ensured that they are enabled for operation write permission As soon as an INTEGRATOR is completely configured it can be used inside the VISUALISATION where it will appear as shown below 89 merten by Schneider Electric U motion KNX Server Installation Manual 123 3 RESET If the RESET button is pressed the calculated value shown in the INTEGRATOR will be set to zero and the time integral will restart calculating from beginning z The calculation does no
71. e to create a delay between the individual actions of a SCENARIO using WAIT COMMANDS which cause the SCENARIO to pause for a certain period of time Thus makes it is possible to shift the various actions of a SCENARIO in time Off Up U motion KNX Server Installation Manual VISUALISATION 4 The WAIT COMMANDS are objects which are added to the area ACTIONS EXECUTED FROM THE SCENARIO just like KNX objects For adding a WAIT COMMAND search for the keyword wait with the search function and pull the desired WAIT COMMAND into the desired position of the area drag and drop In U motion KNX Server the following waiting times are available The WAIT COMMANDS can be found through the search function by searching for the keyword wait 1 second 2 second 5 second 10 second 15 second 20 second 30 second 1 minute 2 minutes 5 minutes 10 minutes 15 minutes 20 minutes 30 minutes 1 hour 2 hours 3 hours 6 hours 12 hours 24 hours 78 merten by Schneider Electric U motion KNX Server Installation Manual The WAIT COMMANDS can be found only through the search function because they are directly integrated inside the U motion KNX Server software with the English name wait If WAIT COMMANDS should be fil tered by time in the results of the search function the time unit sec keyword wait separated by a blank space min or hour must be added to the
72. e used from U motion KNX Server on one hand to make the same user s simultaneous access possible also from several client devices and on the other hand offer also some additional functionality The section CLIENTS in the menu ADVANCED FUNCTIONS of the administration menu collects these objects which are handled autonomously by the system and have their visibility set to false in normal case therefore they are listed in gray Of course they can still be selected and it is also possible to access their properties window just like with other objects Version 1 0 0 RC 9 CEN car cache EXPERT LOGOUT VISUALISATION New Client 1 EEE New Client 1 CLOSE EAA gt Setup Technologies Customizati nz Name New Client 1 gt Visualisation Y Advanced functions IP address 192 168 0 101 Logics Conditions Virtual objects Vole number gt Integrators Notifications 3 CLOSE UPDATE CONFIG v Clients 192 168 0 147 192 168 0 96 t Name Action Value Order 192 168 1 81 Users and permissions ID Name Condition Action Value wC The properties window of the CLIENT object offers the following parameters NAME Label which identifies the CLIENT device Normally this will be the IP address but it can be modified for an easier recognition of the target device e g touch bedroom IP ADDRESS IP address Can only be modified on manually created objects VOIP NUMBER A number can be assigned to the CLIENT
73. e will be opened 12 4 MOBOTIX CAMERAS U motion KNX Server offers native support for all cameras of the brand MOBOTIX further details on the available models as well as the product catalogue can be found on http www mobotix com In order to configure a MOBOTIX camera in U motion KNX Server please follow the steps below Please access the configuration area of U motion KNX Server Please select TECHNOLOGIES gt VIDEO SURVEILLANCE Click on the ADD button to create a new camera and access its configuration window through the EDIT function e Please select MOBOTIX MJPEG as video format Version 1 0 0 RC 9 SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION New Camera 2 cLose gt Setup v Technologies P e Name New Camera 2 v Video surveillance Enfance Video format Mobotix MJPEG L IP address 127 0 0 1 v Intercom 7 IP port 80 gt VoIP participants Zu External units Protocol HTTP x gt Call groups Max EPS 5 e Clients Users Settings gt Energy Icon Customization X gt Visualisation E Atvankedfehons Appearence in planview Preview X gt Users and permissions CLOSE Name Description ETS name wL 98 merten U motion KNX Server by Schneider Electric Installation Manual Now configure the following parameters IP ADDRESS Local IP address of the camera videoserver IP PORT IP port through which the video stream can be accessed Please sele
74. earch function and can be dragged into the drop zone The following screenshot shows an example configuration in which the room ALARM CENTRAL should be opened at every condition change of the object ALARM in fact exclusively on the client devices that are currently running with the chosen user Yersion 1 0 0 RC9 SAYE CLEAR CACHE EXPERT LOGOUT YISUALISATION GO O O NewUser5 awUser5 CLOSE UPDATE CONFIG gt Setup gt Technologies Customization Username NewUser5 Visualisati gt Visualisation aver gt Advanced functions v Users and permissions Repeat password v Users Trusted IP admin manager user YolP number gt User groups CLOSE UPDATE CONFIG Na ID Name Condition Action Yalue x 772 ALARM Ifalarm Redirect LARM CEM ABC cy 119 merten U motion KNX Server by Schneider Electric Installation Manual type CLIENT please refer to chapter 11 7 of this manual meanwhile in that case events are limited to one client device in case of the user the events are executed on all client devices on which the user is currently logged in lt gt The configuration of EVENTS for single USERS is very similar to the configuration of EVENTS for objects of 14 4 USER GROUPS AND PERMISSIONS Through the properties window of an USER GROUP it is possible to define beside its name the different users that should belong the group even here the users can be localized over the search function and
75. eb server can be used to program KNX devices or to start diagnostic actions on the bus without needing an additional interface e g USB KNX connected to the own PC In the local network the PC with the ETS installation can be connected directly to U motion KNX Server also wireless if an active Wi Fi connection is present When using ETS3 please follow the steps below In the menu Extras please click on Options and select the section Communication Click on Configure interfaces Click on New type in U motion KNX Server as name and KNXNet IP as type Add manually the denomination and IP address of U motion KNX Server and set 3671 as port do NOT enable NAT mode Confirm the changes by clicking on OK Now select U motion KNX Server as active communication interface and check the connectivity by clicking on Test If after a few seconds the message OK is shown U motion KNX Server can be used as interface ETS Connection Manager Configured Connections Options Properties Mame Uf motion Type ENSnet lP O Standard connection Communication parameters KNXnet IP device PY indicates programming mode active U matian 192 168 0110 MAC addr 00 00 00 00 00 00 Mame U motion IP address 192 168 0 110 Fort 3671 NAT mode KN amp net IP Diagnostic Wizard ae Strategy Communication Troubleshooting Select Communication Inter
76. ed into the red dashed drop zone its name is shown inside Now the operator for the comparison of the condition must be defined You can select between the following operators Condition operator Comparison values Minor Minor or equal Major Major or equal Equal 1 Condition operator Comparison values All values in the range bounds included All values in the range bounds excluded All values not in the range bounds included All values not in the range bounds excluded 2 Depending on the selected condition operator either one or two comparison fields will be shown in which the values for the comparison must be entered For each field it is possible Test input mode to assign a numeric value please use the dot as separator for decimal values ee ee eee ee 2 2 ee ee 2 2 2 2 eB eB eB 2 2 2 2 2 eB eB eB eB 2 eB eB 2 eB eB 2 Be Be O In this case the red button permits to switch between text input mode and drop zone In the second case the field will show the name of the object that has been dragged into the drop zone ee ee ee 2 ee 2 XXX Be 2 eB 2 2 eB eB 87 merten U motion KNX Server ip Seimei AEA Install
77. en connected Notify me when this connection has limited or no conmectyvity Once the network settings have been changed open a browser on your PC Google Chrome preferred and enter the following URL into the address bar of the browser http 192 168 0 110 umotion modules system externalframe php context configuration This link will open directly the configuration menu of U motion KNX Server if the network connection is working properly you will see the following screen ACCESS Username Password Remain connected v 11 merten U motion KNX Server by Schneider Electric Installation Manual Alternatively you can also just enter the IP address of U motion KNX Server in the browser address bar In this case the login window of the visualisation is displayed After login see next section the configuration menu can be reached by clicking on the ADMIN button in the toolbar more details in the User manual or in chapter 1 6 of this manual Note U motion KNX Server is limited to only one remote access from another PC Desktop Laptop which is D meant for programming the device The access from mobile devices or U motion Client Touch 7 through the U motion Control App is not limited The maximum comfort for using programming U motion KNX Server can be achieved with the following browsers Google Chrome Apple Safari However it is not recommended to use the following browsers because they can t represe
78. end any commands to the system like for example KNX objects but are primary used for labeling or demonstration purposes Baya ee merten U motion KNX Server by Schneider Electric Installation Manual ersion 1 0 0 RC 9 SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION A Thermostat with op Kaas id Thermostat with OP CLOSE Setup Technologies Customization a Name Thermostat with OP v Visualisation gt Rooms Functions Links Template Thermostat with operating mode v Scenarios v Complex objects Function None Shutters central e Dimmer CLOSE e Shutters percentage e Weather ADD e RGB Name Details Label Visible Functionality Scher a uling Multiroom zone a F X Temperature Vv Measured temperature Z e Shutters up down lamellae Advanced functions X Setpoint comfort W Setpoint Heating Comfort v Users and permissions Setpoint precomfort RM Setpoint Heating Precomfort v X Setpoint Economy v Setpoint Heating Economy Z an Mate aind o g Pakia aind to cien AE j aias an ai Through the option VISIBLE it is possible to hide objects which have been inserted in the COMPLEX OBJECT in the rest of the VISUALISATION Since the individual objects are now grouped in a COMPLEX OBJECT it could be desired that they should not be visible in other pages of the VISUALISATION this concer
79. ese objects include logical expressions of type AND and OR between two or more objects of the software where the result of such a LOGIC can in consequence command various other objects of the software For creating new LOGICS e Open the ADMINISTRATION area Select ADVANCED FUNCTIONS LOGICS Press the ADD button Access the configuration window of the LOGIC In the area LOGIC INPUTS all objects that should be evaluated in the logical expression must be added Search for the desired objects with the search function and simply pull them into the area drag and drop For every item of this list a specific ID number will be shown This number must be used to create the logical expression of the LOGIC 84 merten U motion KNX Server by Schneider Electric Installation Manual Version 1 0 0 RC 9 GST cE cache EXPERT LOGOUT VISUALISATION CD New Logic 1 gt New Logic 1 CLOSE gt Setup Technologies gt Customization Name New Logic 1 gt Visualisation v Advanced functions v Logics Logic motion detection Logic 334 AND 336 L Conditions CLOSE gt Virtual objects gt Integrators gt Notifications gt Clients Name Description ETS name gt Users and permissions ID Name X 336 Light B X 334 Light A Name Condition Action Value When creating the logical expression the following points must be considered The evaluation of a logical expression is always don
80. etup Technologies Customization gt Visualisation Advanced functions Users and permissions Glower ON OFF 0 Off 1 On Plug ON OFF 0 Off 1 0n SELECT ICON Light ON OFF 0 Off 1 On Spot ON OFF 0 Off 1 0n Standard lamp ON OFF 0 Off 1 On Lot entrance Lot 1 CANCEL FB Lat 1 FB Lot 2 FB Logt3 Lot 3 Filter CLEAR CACHE EXPERT LOGOUT umination one VISUALISATION m manual The selection of the icon during this phase can more be seen as the definition of the graphical function a combination of icons buttons properties which is used in order to show the object correctly within the VISUALISATION Further information regarding the graphical function can be found in chapter 14 1 of this 42 merten U motion KNX Server Installation Manual by Schneider Electric At this stage it is also possible to modify the ETS import rules again This is very useful if the list shows a lot of KNX objects that have similar keywords in their names and could use the same configuration settings In this case the appropriate ETS import rule could be added in the following way By clicking CUSTOMIZE RULES the ETS import rules configuration menu is opened in a new tab Add new ETS import rules or modify already existing rules Afterwards change back to the tab containing the ETS import and click on RELOAD RULES Repeat this process agai
81. face Configure Interfaces LU mation Settings Prompt when connecting Problem Analysis Abbrechen bernehmen B4 merten U motion KNX Server by Schneider Electric Installation Manual When using ETS4 please follow the steps below In the main menu please click on Settings In the lateral menu click on Communication Ei Ersar gt a ie en N Quick Actions KNX Change Database Change the currently open database Presentation Genera A New Project Presentation Language Communication Enable automatic scan on serial ports New Project Assistant i ante a naw project using thes Database Use project connection if available Use direct KNX IP connection if available Software Updates Diagnostics BA Open diagnostic toot Device Info Troubleshooting Currently selected Individual Addresses Import Export U motion Unload Device Bus Monitoring Shortcuts Configured connections Group Monitoring ETS Apps d U motion 192 168 0 110 ee Labels ee nc ees Online Catalog Import Projects Import Products ye o Exit Recent Projects New Click on New in order to open the popup New connection enter a name for the connection KNXNet IP as type and manually insert the IP address of the server lastly use 3671 as port do NOT enable NAT mode F New connection o a Properties Name Umotion Type KNXnet IP Communication p
82. gether this type of navigation can be very convenient for example changing the set points for air conditioning control more blinds alarm functions etc Q gt Back si Dimmer value FB Dimmer s4 FBDimmer 75 FB Light A Alp System Fan Illumination A Climate s Shading i Steckdose Dimmen Energy management G Weather 65 U motion KNX Server Installation Manual merten by Schneider Electric t Dimmer value 1 FB Dimmer Sm Steckdose Dimmen ES mobile devices their operation could become impractical So you should take care about what kind of objects o Functions that contain a lot of objects easily result in complex pages in the VISUALISATION and especially on will be assigned to a function in order to keep the number of objects per function at a comfortable level An alternative are COMPLEX OBJECTS which allow grouping multiple objects in one object e g all objects of a thermostat for more detailed information please see the related chapter 66 merten U motion KNX Server Installation Manual by Schneider Electric 8 COMPLEX OBJECTS 8 1 INTRODUCTION This chapter deals with COMPLEX OBJECTS which allow grouping different KNX objects in a single object Different KNX objects which are necessary for the operation of the same KNX device can be combined into a single object with a special l
83. h B 5 7 2 KNX GROUP ADDRESSES This section is only visible in the EXPERT mode and allows the handling of the group addresses that are associated to an object Depending on how the imported ETS project is structured not only the main group address from which the object was created during the ETS import but also additional group addresses can be found here whose can update the state of the object in the VISUALISATION state feedback central functions etc For each linked group address various communication options can be set Read only Write only and Read Write before this communication options are changed please make sure that in the ETS project the needed permissions for a correct functionality are configured cs U motion KNX Server can send active commands to only one of the listed group addresses It is very important to ensure that only one of the linked group addresses has write permissions KNX group addresses which shall refresh the status of a KNX object can also be added after the ETS import if not already done automatically by the import procedure Activate the filter for the KNX group addresses Search the desired KNX group addresses with the search function Select the desired KNX group addresses from the search results list Then drag the selected group address into the list of linked group addresses of the object and drop it there Define permissions normally Read only when the
84. h function also supports the multiple selection of objects by holding the CTRL key of your keyboard while selecting the desired objects with the mouse The selected objects will all be colored green 24 merten U motion KNX Server by Schneider Electric Installation Manual SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION 1 A A scenar v Search results 11 New Scenario 10 1D New Scenario 11 New Scenario 12 Scenarios ID 384 New Scenario 13 New Scenario 14 New Scenario 15 New Sc Scenarios ID 388 Scenarios ID 389 New Scenario 7 New Scenario 8 New Scenario 9 The TOOLBAR can show the following action buttons EDIT Opens the configuration window of the selected objects DELETE Removes the selected objects from the project CLONE Clones the selected objects The CLONE action creates a one on one copy of the selected objects After the execution of this command the search results are refreshed and also the cloned objects will be shown can be recognized from the prequel Copy of When cloning an object not only the objects itself is duplicated but also all of its connections relations with other objects This means that the cloned object will be contained in the same rooms logics scenarios etc as also the original object Therefore after the creation of a cloned object all relations and connections should be checked and if necessary correcte
85. he following steps must be followed gt Power off the system installation Install U motion KNX Server on a DIN Rail Connect power supply and KNX bus to U motion KNX Server Power on the system installation Wait until U motion KNX Server has booted up VV VV ATTENTION A If the U motion KNX Server hardware is changed irreversible damage can occur Any intervention on the equipment should be performed only by authorized personnel of U motion KNX Server 1 3 2 ENVIRONMENTAL CONDITIONS The correct function of U motion KNX Server can be granted only if the following requests are met OPERATION Ambient temperature 0 C 70 C 1 3 3 COMMISSIONING U motion KNX Server is power supplied by a power adapter NOT included in the U motion KNX Server packaging The device supports power supply voltages of 12 24V DC ATTENTION Before commissioning U motion KNX Server all connections must be checked Verify that the voltage of the connected power supply doesn t exceed the supported voltage range in order to avoid damage on the device 10 merten U motion KNX Server Installation Manual by Schneider Electric 1 4 NETWORK CONNECTION For the usage configuration of U motion KNX Server a working network connection is required In order to make the first access to U motion KNX Server or if a compatible network is not available follow these steps Connect U motion KNX Server through a crossed network cable cro
86. he user can switch into the editing mode The editing mode permits the following actions The single objects can be moved to the desired position at the beginning all the objects will be placed in the left upper corner one over the other For each object can be defined whether it should have a graphical shade or not For each object can be configured whether its name should be visible in the VISUALISATION or not It is also possible to place transparent areas on the background image which are linked to the corresponding sub rooms when using the template BACKGROUND sub rooms will be represented through a touch sensitive transparent rectan gle which can be placed on the background image and used for navigation For detailed information please refer to the user manual 63 merten U motion KNX Server by Schneider Electric Installation Manual 7 FUNCTIONS 7 1 INTRODUCTION This chapter describes how to navigate in the VISUALISATION with the help of the FUNCTIONS menu and provides information on how to optimally configure objects for the navigation with the FUNCTIONS 7 2 ADMINISTRATION OF THE FUNCTIONS The FUNCTIONS can be configured in the ADMINISTRATION area under VISUALISATION FUNTIONS Version 1 0 0 SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION RCQ CD Functions I Search results 9 Functions CLOSE Setup ontained object Technologies Name Description ETS name State Detai
87. hown in this room only the contained sub rooms will be shown in the navigation menu of the VISUALISATION BACKGROUND IMAGE If the chosen template provides embedding a background image here the desired image can be defined with a simple click on the empty square a pop up window will appear showing all uploaded pictures and allowing their selection a p s g aa te sol iH Through the UPLOAD button further images can be uploaded to U motion KNX Server after a successful upload the new images can be selected from inside the pop up window ICON For each room an appropriate icon can be selected 58 merten U motion KNX Server by Schneider Electric Installation Manual SELECTICON Sd Jd La A R E A A bs i V p amp ba ba ba A GG Oe I A AIS Fam AA CANCEL Simply click on the desired icon inside the appearing pop up window to select it for the current room Enabling the EXPERT mode the following additional options are available DESCRIPTION Additional information that can simplify the search VISIBLE Defines if the room is visible in the VISUALISATION OPEN IN NAVIGATION MENU With this option it can be defined if navigation object present in the room should be opened inside the navigation menu or not Note This option is automatically activated if the room contains navigation objects e g links ENABLE PIN CONTROL Whit this option the room can be PIN protected To enable
88. igure import rules through which the imported group addresses will automatically be configured and connected to the desired icon function in dependence of the defined keywords ETS IMPORT Allows the import of a ETS project into U motion KNX Server CONFIGURE Permits to change the parameters of the used KNX communication interface COMMUNICATION ETS PROJECT Permits to navigate through the single group addresses and to edit them the navigation structure will be the same as the one in ETS 90 merten U motion KNX Server by Schneider Electric Installation Manual 2 4 5 TECHNOLOGIES VIDEO SURVEILLANCE In this section IP cameras can be integrated into the visualisation they can be reached inside the visualisation by clicking on the related icon in the navigation menu 2 4 6 TECHNOLOGIES INTERCOM ONLY U MOTION KNX SERVER PLUS This section contains several configuration menus for using U motion KNX Server Plus as VoIP server for the integration of door communication systems VOIP participants IP phones or softphones with SIP protocol support EXTERNAL UNITS Compatible video or audio door stations SIP Protocol support is necessary supported video format MJPG CALL GROUPS External and internal units can be grouped into a call group by calling a call group all the internal and external units belonging to the call group will start ringing CLIENTS Here are all client objects liste
89. ity de termines where the object is displayed in the COMPLEX OBJECT e g an object with the functionality Display Value center will be displayed in the center of the DISPLAY area of the COMPLEX OBJECT For each added object a label can be defined which will be displayed above the corresponding object in the COMPLEX OBJECT cs Attention If for more than one object the same functionality has been selected it is possible that the objects l are not being displayed correctly in the VISUALISATION Vice versa it is possible to add the same object several times into the COMPLEX OBJECT and assign different functionalities e g display an object on one side in the DISPLAY AREA as status and on the other side add it to the MAIN AREA to permit also operation of the object The object which is configured with the functionality DISPLAY VALUE CENTER will be used to display the complex object in its reduced form inside the VISUALISATION BACKGROUND GRID furthermore also the state of this object will be shown in the reduced complex object on the left side of the button intended to open the popup window of the COMPLEX OBJECT 8 5 RGB LED CONTROL The complex object RGB permits the possibility to control RGB lights in easy way 74 merten U motion KNX Server Installation Manual by Schneider Electric 9 SCENARIOS 9 1 INTRODUCTION This chapter describes the extensive possibilities offered by the SCENARIOS i
90. kar beat Armada to pull within five points of league leaders NHL Capsules Crosby scores 23rd of season Penguins top Rangers 5 2 for 11th straight URL is not already listed but only a link to the RSS feed is available you can get the URL through the context menu right clicking on the link by selecting the option Copy address the link address will be copied to the clipboard and from there it can be easily pasted into the configuration of U motion KNX Server To get the appropriate feed URL check out the homepage of the provider of the feed If the corresponding Note Not all RSS feeds are necessarily compatible with the XML encoding used by U motion KNX Server and therefore may not be shown correctly 4 4 6 INTERNET BOOKMARK In this page a bookmark for the integrated browser function can be defined this page will be shown when the internet bookmark function inside the VISUALISATION is accessed through the navigation menu Hint The web browser integrated inside the VISUALISATION area is not compatible with all web pages All D pages that use an automatic forwarding to other sites can t be handled properly As the name of this functionality indicates correctly it was designed to configure and open single internet bookmarks and not for complete navigation 35 merten U motion KNX Server by Schneider Electric Installation Manual 4 4 7 DISPLAY INTERACTION This page contains different option
91. le ETS NAME Name of the related group address from the imported ETS project this name can be used as keyword in the search engine to find the object ETS ENCODING This setting determines which encoding U motion KNX Server must use to communicate with the related group address via the KNX bus Note Changes to this setting should be considered carefully since an encoding that does not match the settings of the related device can lead to incorrect behavior of the VISUALISATION FORMATTING This option allows you to personalize the display format of an objects value The syntax is X Y H Type Unit Indicator for the beginning of a formatting syntax X Y Digits before the decimal point X and after the decimal point Y TYPE Defines the output format to use for the value to be displayed b Binary format c Character numerical value required d Decimal number E Scientific floating point format f Floating point format s String X X Hexadecimal format UNIT Separated by a space from the rest of the formatting here can be specified which measure unit should be appended to the formatted value In this way it is possible to personalize the default measure unit of an object For example the formatting 0 2f kW would display the value 143 58674 inside the visualisation in the following format 143 53 kW By using the formatting d kW the same value would be displayed inside the
92. le KNX objects can take a lot of time depending on the number of KNX objects cs The ETS import rules can be modified also during the import process in the moment when those KNX objects are listed which do not match with any ETS import rule 5 4 ETS IMPORT For being able to import an ETS project it must be first created a compatible project file for U motion KNX Server like described in 5 2 The import process for U motion KNX Server is the following e Open the ADMINISTRATION menu Under TECHNOLOGIES KNX choose ETS IMPORT Select through the BROWSE button the project file you created Configure the import options as desired and click NEXT for starting the import procedure TE ELDUR Ei AAT LIHAT WILL Te ale ee er are ee year ren Aly ged check on HEET 39 merten U motion KNX Server by Schneider Electric Installation Manual In BASE mode the following options are available DELETE EXISTING KNX OBJECTS If this option is enabled all KNX objects present in the database will be deleted before the ETS Import CREATE AUTOMATIC RELATIONS This option enables disables the automatic recognition of relations between individual group addresses in the ETS project and the creation of the same relations in the U motion KNX Server database for example for updating statuses of individual objects across multiple group addresses e g for central functions Enabling this option usu
93. lease do not use commas to separate the data since the weather service doesn t support that Please use spaces to divide the single words numbers The usage of the weather services requires a valid Weather API ID which can be obtained for free on the following web page http free worldweatheronline com register aspx Without valid Weather API ID the weather services of U motion KNX Server can t be used In this case please disable all kind of weather information display within the HOME page as described within the last chapters 4 4 5 RSS FEEDS Up to 5 RSS feeds can be integrated into the visualisation through the appropriate link in the navigation menu the page displaying the specified RSS feeds can be reached For each feed a title and the appropriate URL can be specified 34 merten U motion KNX Server by Schneider Electric Installation Manual Parameter Value Feed 1 Title BBC Feed 1 URL http feeds bbci co uk news rss xml Feed 2 Title Sports Feed 2 URL http feeds bbci co uk sport 0 rss xml edition uk The following screenshot shows the result of a correct configuration of the RSS feeds WHL Roundup Giants snap Rocket s 16 game win streak with 4 2 victory Ben Bishop stops 19 as Tampa Bay earns 2 0 shutout against Calgary Flames NHL Capsules Ben Bishop stops 19 as Tampa Bay earns 2 0 shutout against Calgary Flames QMJHL Roundup Drak
94. leted configuration of a load control the user can find it in the VISUALISATION in the section LOADS by selecting the entry ENERGY from the NAVIGATION MENU Selector Load control if more than one present Energy counter Mi Consumption Q gt 600 W lt gt lt gt 1100 W 1100 W Loads 115 merten U motion KNX Server by Schneider Electric Installation Manual The ENERGY COUNTER in detail shows the following information Consumption W Max 1200 Min 800 Current power value Min and max limit The loads instead are shown in the following way Priority Auto Man 1 J 1100 W Load Current power consumption if available 116 U motion KNX Server Installation Manual merten by Schneider Electric Even in this case a click on the ENERGY COUNTERS will open a pop up window which permits to adapt the settings of the load control furthermore additional details regarding the general consumption or the single loads consumers can be viewed If the ENERGY COUNTER is clicked it is e g possible to adapt the limits of the load control If instead a load is clicked it is possible to modify parameters like the priority of the load or the operating mode AU TO MAN and it is possible to control the load manually O Scheduling Load Control MANUAL M7 merten U motion KNX Server Installation Manual by Schneider Electric 14 USERS 14 1 I
95. lisation s updated Advanced functions Users and permissions New KNX objects 5 m If some of the created KNX objects do not match any ETS import rule they are all listed during the import process and can be personalized manually 41 merten by Schneider Electric Version 1 0 0RC9 CD ETS import Setup Technologies Customization gt Visualisation Advanced functions Users and permissions The available options are the same as you can define in the ETS import rules encoding related to the settings inside the mported objects customization Executed operations Existing KNX group addresses 38 updated ETS import rules Objects not covered by the import rules to customize manually 87 Name Lot entrance Lot 1 FB Lot 1 FB Lat2 FB Lat3 Lot 2 Lot 3 Group address 0 0 14 0 0 13 0 0 20 0 0 22 0 0 26 0 0 27 0 0 28 Encoding Switching 1 bit Switching 1 bit Switching 1 bit Switching 1 bit Switching 1 bit Switching 1 bit Switching 1 bit EXPERT U motion KNX Server Installation Manual LOGOUT Function None None None None None None None VISUALISATION Icon x L7 Fa x LZ wa A Z w h ii Wa x z v le A Wa ETS project function and icon the shown icons depend on the selected encoding and function for the related object S
96. lphanumeric characters only TRUSTED IP Optional enables the automatic authentication on the system when the VISUALISATION is accessed on a PC with the IP address specified here Once you have created a new USER it must be assigned to a USER GROUP to receive the desired access permissions Simply drag the desired USER GROUP into the area USER GROUPS TO WHICH THE USER BELONGS Furthermore it is possible to connect the user to EVENTS they permits to execute the following actions on every client device that is currently logged in with the selected user PAGE JUMP permits to create a page jump to a certain page on all client devices currently running with the selected user page jump within the browser on default clients and within the app on mobile clients In order to configure a PAGE JUMP please follow the instructions below Drag the object that should cause the page jump e g a KNX object into the section PASSIVE EVENTS Define the CONDITION that should trigger the page jump the available options depend on the previously selected object Now use the column VALUE in order to define the target page which could be Either an external web page homepage web server etc Or aROOM of the software In the first case it is sufficient to insert the URL of the desired page into the text box In the second case instead the text box can be changed into a drop zone using the red button now a ROOM can be selected using the s
97. ls Customization v Visualisation X System System Rooms ae N X Illumination lllumination Links X Climate Climate Scenarios Ka i X Shading Shading Complex objects Advanced functions X Energy management Energy management Users and permissions X Weather Weather 64 merten U motion KNX Server Installation Manual by Schneider Electric It is recommended to switch to EXPERT mode for being able to see also hidden functions In the displayed list following can be done The names of the single functions can be changed The order of the functions can be changed via drag and drop pulling the single functions to the desired position which will also be used in the VISUALISATION Not used functions can be hidden so that they are not visible in the navigation menu of the VISUALISATION 7 3 FUNCTIONS IN THE VISUALISATION If you click on FUNCTIONS in the navigation menu of the VISUALISATION all visible FUNCTIONS are listed inside the navigation menu and all the objects assigned to the currently open FUNCTION page are shown in GRID layout without background image Depending on the selected FUNCTION the related objects are displayed So it is possible to reach objects with certain functionalities directly instead of navigating to the individual objects through the rooms in whose they are located Especially when different objects of the same functionality shall be controlled to
98. n if needed Once all objects are customized as desired please click on NEXT to complete the ETS import The software allows the termination of the ETS import process even without assigning a graphical symbol to o the single KNX objects nevertheless this is not recommended since such objects cannot be visualised correctly However it is also possible to edit the individual objects after the ETS import and therefore to assign them a graphical symbol in a second step Once the ETS import is completed the single KNX objects are available under TECHNOLOGIES KNX ETS PROJECT The tree structure of ETS is directly imported and can be very helpful to find single KNX objects and to edit them LAE TUES CATH EAH LEGENE WELLE EEA THA Search a 2 Heres m k SE T Tetai HH Pra CTS eee foe a ETS nee ti Cone rein ETS project CLOSE P Demi Sree T Ehini Dee Pao Le EH Hegi Col Bleed id i eet 15 Sheed La 16 Deir oid TER i ui Lis CH a Lineal IC CT ET Light A G27 FB Light B iz 12 12 12 12 iz 12 12 iz 12 is E E E t E E E amp E E E EE i iT wit Lave a i F 43 merten U motion KNX Server by Schneider Electric Installation Manual 5 5 SELECTIVE IMPORT OF AN ETS PROJECT It is possible to import only a part of the selected ETS project In this case you can select manually the group addresses that should be imported into U motion
99. n U motion KNX Server With SCENARIOS different sequences can be created which can be launched manually through a scheduling or depending on events The SCENARIOS must not be confused with the KNX SCENARIOS The KNX SCENARIOS also called light D scenes are basically KNX objects that write a numeric value to the KNX bus and are already created in the ETS project The SCENARIOS of U motion KNX Server are part of the software and are not integrated in the ETS project they are stored on U motion KNX Server and also operate from U motion KNX Server Those SCENARIOS are much more flexible than the KNX SCENARIOS because the software offers more possibilities for the SCENARIOS as only writing a numeric value on the KNX bus 9 2 CREATE SCENARIOS To create a new scenario Open the ADMINISTRATION area of U motion KNX Server In the navigation menu choose VISUALISATION gt SCENARIOS Press the ADD button The new created SCENARIO will appear in the navigation menu and can be opened in a new tab for configuration 75 merten U motion KNX Server by Schneider Electric Installation Manual Version 1 0 0 RC 9 SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION T New Scenario 6 New Scenario 6 CLOSE gt Setup Technologies Customization Name New Scenario 6 v Visualisation gt Rooms Rendering 900 Functions Sas Links v Scenarios Scenario dooropener Sprinkler seq
100. n of the relations between group addresses Click here in order to connect the necessary group addresses automatically Previous content of database Delete existing KNX objects Filters Rules Create automatic relations W mport summary 19 1000 Middle group 12 0 V Select Deselect 12 0 17 Licht A 12 0 12 Thermostat Komfort Standby 12 0 8 Thermostat Basis Setpoint iy 12 0 14 Steckdose Wert 12 0 18 Licht B m 12 0 21 Licht E F 12 0 1 Beregnung 12 0 5 Jalousien B Kurzzeitbetrieb Now you can select between the following actions v v 12 0 36 Jalousien A Kurzzeitbetrieb 12 0 13 Thermostat Nachtmodus 12 0 9 Thermostat aktueller Setpoint 12 0 15 Steckdose Dimmen 12 0 19 Licht C 12 0 22 Licht F 12 0 0 Licht A G 12 0 6 Jalousien B Langzeitbetrieb v v CLEAR CACHE EXPERT 12 0 11 Thermostat Frostschutz 12 0 7 Thermostat IST Wert 12 0 16 Steckdose Ein Aus 12 0 2 Jalousien A Langzeitbetrieb 12 0 20 Licht D 12 0 23 Licht G 12 0 10 Thermostat Backlight 12 0 3 Jalousien A B Kurzzeitbetrieb Automatic integration of the missing group addresses by clicking the link in the message box LOGOUT U motion KNX Server Installation Manual VISUALISATION m Manual selection of the related group addresses or deselection of group addresses that are ca
101. ndow of the newly created object will be opened Example To create a new room just select the entry ROOMS in the main menu VISUALISATION and click on the NEW button The new room will be created and if other rooms have already been created before shown at the end of the sub menu Version 1 0 0 RC 9 CLEAR CACHE EXPERT LOGOUT VISUALISATION ss New Room 25 New Room 25 CLOSE gt Setup Object properties Technologies General information b tomizati Graca i Name New Room 25 v Visualisation v Rooms f gt 1 Floor Represenation gt Parterre Template None Garage 9 Background image v New Room 25 gt Functions gt Links gt Scenarios Complex objects gt Advanced functions Users and permissions m Icon CLOSE Contained objects Name Description ETS name State Details Rooms to which the current room belongs Name Description ETS name 19 merten U motion KNX Server by Schneider Electric Installation Manual For rooms it s also possible to create further sub menus following the same procedure as in the further course of this manual will be explained the resulting tree structure can so also be used in the visualisation The DELETE button removes the selected entries from the project This action is blocked for the system menus and indispensable objects for preventing the user to remove them by accident 2 4 2 MENU STRUCTURE The navigation menu permits to access every setti
102. neral information Name Apartment Destination Represenation Icon N CLOSE Rooms to which the link object belongs Name Description ETS name Now the following properties can be changed CLOSE m NAME Name of the LINK inside the VISUALISATION DESTINATION Page that is shown as soon as the LINK is clicked can either be a URL or a page of the visualisation as explained below ICON Graphical icon through which the LINK is displayed inside the VISUALISATION The DESTINATION can be configured in 2 ways e Either a path URL to an IP address or a web page in this case just insert the address in the field e Or a room of the visualisation in this case just use the search function to drag the desired room into this field In order to switch between the 2 methods you can just click on the red button next to the destination field it can either be a input field or a drop area for connecting an object Search results 2 gt Setup Technologies Customization v Visualisation gt Rooms Functions v Links Apartment L Scenarios Complex objects Advanced functions Users and permissions Version 1 0 0 RC 9 EXPERT LOGOUT New Link 1 New Link 1 CLOSE Object properties General information Name New Link 1 Destination www bbc com i A Represenation Icon CI CLOSE Rooms to which the link object belongs Name Description ETS name 82
103. ng of the web server and has the following structure SETUP Contains generic settings and parameters of the web server TECHNOLOGIES Contains the configuration pages of all technologies supported by the web server KNX Video surveillance intercom etc CUSTOMIZATION Contains the configuration pages for customizing the graphical design of the visualisation and the web server plugins VISUALISATION Allows the configuration of the visualisation itself rooms functions scenarios etc ADVANCED FUNCTIONS Allows the configuration of additional functions e g logics notifications etc USERS AND PERMISSIONS Allows the configuration of new users and their access permissions 2 4 3 SETUP The menu SETUP contains the following entries LANGUAGE Permits to change the language of the GUI NETWORK Permits to configure the network parameters of U motion KNX Server UPDATE Permits to update the web server through specific update packages BACKUP RESTORE Permits to create a backup of the current database to import an already created backup or to reset the database to factory settings DATE TIME Permits to configure date time of the web server and all date time related settings Further information can be found in the appropriate section of this manual 2 4 4 TECHNOLOGIES KNX This section contains all settings for establishing a communication with the KNX bus ETS IMPORT RULES Permits to conf
104. ns 120 Bir ae merten by Schneider Electric 15 Remote Access 15 1 Introduction 15 2 Remote Access through Internet Notes U motion KNX Server Installation Manual 121 121 121 122 merten U motion KNX Server Installation Manual by Schneider Electric 1 FIRST COMMISSIONING 1 1 INTRODUCTION U motion KNX Server is a web server for monitoring and visualising home amp building Automation systems which have been realized on the base of the worldwide KNX standard The configuration and use of U motion KNX Server takes place directly through its web interface which can be accessed through a conventional browser from any device operating system This chapter describes how to connect and configure U motion KNX Server so that a successful integration into the own system can occur 1 2 CONTENT OF THE PACKAGING The U motion KNX Server packaging contains the following material U motion KNX Server or U motion KNX Server Plus Connector for power supply and KNX bus Safety notes General notes Quick Start Guide U motion USB Stick documentation and software VV VV VY Hint U motion KNX Server is a pure web server and not usable for standalone visualisation because it has no Fz display The visualisation is accessed through client PCs like e g the U motion Client Touch series which con D nect via network to the server The server has no graphical interface VGA DVI HDMI and therefor
105. ns mainly the FUNCTIONS page Finally through the last column it is possible to configure one of the objects of a COMPLEX OBJECT for being scheduled When the user configures a scheduling for the COMPLEX OBJECT in fact the object enabled for scheduling will be scheduled only one object can be enabled for scheduling inside a COMPLEX OBJECT For example a COMPLEX OBJECT with the TEMPLATE Thermostat could be configured to enable scheduling for the operation mode of the thermostat time based switching between comfort and standby mode If one of the objects of a COMPLEX OBJECT is enabled for scheduling the icon of the COMPLEX OBJECT will show the related symbol on it in the VISUALISATION if the related symbol is not shown on the icon of a COMPLEX SYMBOL no time scheduling is possible 8 4 GENERIC COMPLEX OBJECT The TEMPLATE GENERIC for complex objects permits to group different objects into a definable structure which in the VISUALISATION will be shown inside a pop up window structure and objects can be chosen freely The general settings for the TEMPLATE GENERIC are the following LABEL TAB 1 Label of the related tab in the COMPLEX OBJECT LABEL TAB 2 LABEL TAB 3 The TEMPLATE GENERIC allows displaying different objects on different positions in a pop up window with the follow ing characteristics 72 merten U motion KNX Server Sdad Enen Installation Manual a SUMMARY Display Labels Main a
106. nt all the functions of U motion KNX Server correctly Microsoft Internet Explorer Opera Mozilla Firefox The browser compatibility is continuously under development it is recommended to check out the list of the compatible browsers in the documentation of newly released product versions 1 5 ACCESS On delivery U motion KNX Server has preconfigured the following users Username Password Description admin admin System Administrator Can edit the visualisation create users and change their access rights permissions manager manager User for the installation configuration of the system It can change all settings regarding the visualisation but has no access to system settings user user Basic user for client access It can navigate through the whole visualisation but has no or very limited access to the administration of U motion KNX Server On the first configuration of U motion KNX Server you must login with the admin user Do this by entering the appropriate data into the login screen once logged in you will see the following screen SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION 12 merten by Schneider Electric U motion KNX Server Installation Manual 1 6 ADMINISTRATION AND VISUALISATION AREA The interface of U motion KNX Server is split into two areas ADMINISTRATION or BACKEND Configuration area in which depending on the users permissions
107. ntain the path to the still image without prequel http 12 6 VISUALISATION Once the camera objects have been configured as described in the last chapters they can be implemented in the visualisation area in 2 different ways e Either using the pre configured menu entry VIDEO SURVEILLANCE in the NAVIGATION MENU Or within rooms as wells in GRID view as also in BACKGROUND view The first implementation method is created automatically by the software If the entry VIDEO SURVEILLANCE is opened a list of the configured cameras will be shown a click on one of the listed entries will open a popup window showing the camera stream as visible in the screenshot below 100 merten U motion KNX Server by Schneider Electric Installation Manual If the cameras are also inserted into one or more rooms their signal can also be shown directly inside the pages of the visualisation If the room was created using the GRID view template the camera is shown together with the function boxes of the other objects with the difference that the camera object takes the place of 6 normal objects 3 rows 2 columns as shown in the screenshot on the next page 3 Depending on the resolution of the Client the other objects are places around the video signal occupying the free space on the right and bottom side of the video box video box is placed in the FIRST column of the page Otherwise on the left side an empty no
108. on SUB OBJECTS FOR POWER CALCULATION or add them in form of VIRTUAL OBJECTS using the corresponding ADD button The calculation is only executed when There is ONLY one object with the functionality VOLTAGE o There is at least one object with the functionality CURRENT ee Normally the power calculation will use KNX objects for current and voltage nevertheless also here the usage 5 of VIRTUAL OBJECTS can make double sense If the voltage value is not delivered by the bus it can be set as a constant value using a VIRTUAL OBJECT actuators with current values not always will also provide the voltage e It is possible to introduce a constant power factor as virtual current value for devices which do not provide any measured data in order to get at least an estimated consumption report After the configuration of the necessary objects U motion KNX Server will refresh the power value automatically just as it would come directly from the bus This value can now either be shown in the VISUALISATION or it can be used again through the ENERGY COUNTER for example for the load control 13 4 LOAD CONTROL 13 4 1 GENERAL SETTINGS U motion KNX Server is able to control loads consumers in the installation and to also to turn the off in front of elevated consumption by configuring limits and priorities After return to the normal consumption the loads are activated again in reverse sequence U motion KNX Se
109. on and dragging the objects to the desired position In order to place objects on the video signal they must have a lower ORDER than the video signal This means A nice graphical effect can be created by using camera objects in combination with KNX objects with a TRANSPARENT symbol available only for ON OFF objects In this case a transparent object can be placed on top of a real object displayed in the camera image e g a lamp is this transparent area is clicked the lamp will turn on which will be shown directly through the camera image without needing a symbol for the repre sentation of the state In both named visualisation methods it is possible to add more than one camera objects per page Nevertheless it is not recommended since the camera signals can have a significant impact to the performance of the Client and therefore can slow down the whole VISUALISATION Not all video signals support that objects are placed on top Especially video signals that require a plugin for their correct visualisation are always shown in the top layer of the browser independently from the settings of U motion KNX Server In this case no objects can be placed on top of the video signal but can only be placed in the remaining free space of the room 102 merten U motion KNX Server Installation Manual by Schneider Electric 13 ENERGY MANAGEMENT 13 1 INTRODUCTION This chapter explains in detail how to log and
110. on menu which is minimized for this purpose Te Thermostat Backlight 12 0 10 P Menu The results are shown together with the following information NAME Name of the object inside the software s database TYPE Object type shown directly under the name of the object PRIMARY PROPERTY If available on the right side the primary property of an object is shown for example the group address of a KNX object By setting a search filter only relevant object types are displayed in the search result Search filters can be activated by clicking on the corresponding description in the properties of an object If for example a search filter for KNX group addresses is active only objects of type KNX group address matching the specified search word are displayed in the search results By clicking on the FILTER icon to the right of the search box such a search filter can be disabled A result entry will be colored green if it is clicked as within the navigation menu there will appear some action buttons in the bottom toolbar if the selected object allows editing In this case the 3 points on the right side of the selected entry will be visible enabling a quicker access to the property window It is possible to change the objects name directly in the search engine with a simple double click on the whished item in the list of search results This way the search engine can be used to do fast customizations The searc
111. onigure core on E ETS eee b Yale ee b rimon E Era er 1 TTS F Achorced factor ko Mer od pee aldi ui Kal Bee ee are Ge ya pect Bip ad cick on HEET cos After starting the import procedure by clicking on the NEXT button the objects are created automatically just as during the standard import procedure Even in this case the matching import rules are applied and at the end the list of non matching objects will be shown for manual configuration As a difference to the classic ETS import the bit length of the objects if not specified in the third column of the CSV file has to be set manually This information is not added by the ETS export u The CSV import can be useful above all when you want to create import group addresses manually into U motion KNX Server without using ETS In this case you will just have to create a CSV file with the corresponding name and group addresses and import it 47 merten by Schneider Electric U motion KNX Server Installation Manual 5 7 KNX OBJECT PROPERTIES 5 7 1 KNX OBJECT DETAILS If a KNX object is selected in the navigation menu or through the search function and the EDIT button is clicked the following screen will appear LAE TULER CALCHI EEFTAT LOGE VEHAS ERA THOE 7 I fied den EJ 1 1 120 Bred 1 l 1 CLOE Tardi ToT si 2S See a A G Tre orig Airi Liai alle te RHE der a FD LRA STB Light B e s eris Tr
112. ons SEARCH FUNCTION The search function can be found in the upper left corner in form of an input filed which allows to find objects quickly by entering keywords related to the searched objects MENU Main menu of the software shown as a tree view Through this menu all sections of the software are accessible and objects can be created modified deleted TOOLBAR The toolbar in the upper side of the ADMINISTRATION is always shown and allows switching quickly to the mostly used functions through the related buttons WORKSPACE Main area for showing the chosen configuration options the single menus and configuration windows of the objects are shown in here It is possible to open more menus windows in the main area at the same time the different menus windows will be accessible through different tabs in this case 15 merten U motion KNX Server by Schneider Electric Installation Manual The following screenshot shows the single sections of the ADMINISTRATION area Search function Toolbar Kur iit Shine EAR oa TELEL LiTH Lin Hm UUpeione Deine Het E DateTime F Tae hiker E ETS meer nd E DTZ meet Kate Eee a b ETS pn b ideo hry Eo Near i bo ee ee There i Hoon Ter E Firari b Opie T Re u eg b Ar re Menu Workspace 2 3 TOOLBAR Following functions are always present in the toolbar SAVE Allows saving all changes into the flash memory of U m
113. op up with information about the current WORKSPACE content CLIAR Shi AAT Hanah b cah a ny Hebwork configunien a The denig pager cori I ren LAH and Des mei echt ae T Setup CAH EULESS a erh Pah a bh plaa Paeahi Lr E airs th iiag iii ATTENTE pinana F car en erlegen berg Pan Heta k en piena f pmi e Aa ee ee a re rririk TIEFEN pon wel ot Ba ees i ei ee en er Pe robe al Pen im lipia or tn rena eng ore apple rec wher cle long om the uve burn in eS M eS ee ee pikiri PaT et ee Fo Fh pa Biting Here Laer Te ea biii mike Cate Tire T FO ETS iy ara DAE Te eS ETS pct neo DAEs ea ee Or ed BP ideo arador E nim I E Erai bree Penner When you switch into another tab the help pop up will be closed button again 26 For showing the help of the new tab click the help merten U motion KNX Server Installation Manual by Schneider Electric 3 SETUP 3 1 INTRODUCTION This chapter explains the configuration pages for installation commissioning and maintenance of U motion KNX Server All sections and menus described in this chapter can be found in the SETUP section of the navigation menu To have access to all of these settings you must be logged in as administrator 3 2 LANGUAGE This page allows the configuration of the language that should be used for the different areas of U motion KNX Server Currently the language can be set separately for the ADMINISTRATION and VISUALISATION area Select the
114. ose cycle time depends on the previous setting to be CYCLES UNTIL RESTART executed before the logic increments the priority and therefore turns off loads or in the contrary case amount of cycles before the logic decrements the priority and switches loads back on Normally a low amount of cycles is used for the break meanwhile a high amount of cycles should be set for the restart in order to prevent a continuous switching of loads MAX PRIORITY VALUE Maximum amount of handled priority values the system will not pass the configured value loads with higher priorities are ignored CONTROL TYPE Defines whether U motion KNX Server is responsible for the load control active default setting or if the control should be passive which means through an external load controller In the second case U motion KNX Server is limited to the visualisation oft he received information and doesn t start any actions EXECUTION STATE Shows the state of the load control normally this field will always show PLAY nevertheless the load control can be started and stopped using the corresponding buttons inside the properties window for example in order to adapt changes like adding new loads j12 merten U motion KNX Server by Schneider Electric Installation Manual 13 4 2 CONNECTION OF AN ENERGY COUNTER In order to work correctly each load control must be connected to an ENERGY COUNTER In order to achieve this please follow
115. otion KNX Server what will preserve the data even if the web server is powered off The button turns red whenever changes are made but not saved yet In addition every 5 minutes an automatic saving of all changes takes place so pressing the SAVE button is only necessary if the system should be shut down restarted immediately after making the changes CLEAR CACHE Allows to delete the HTML SERVER CACHE This is especially necessary if changes made in the ADMINISTRATION are not displayed correctly in the VISUALISATION despite the HTML CLIENT CACHE was already deleted BASE EXPERT Changes the visibility of various options parameters within the configuration pages The BASE mode displays only the necessary settings and visible objects the EXPERT mode however shows even more advanced options as well as hidden objects LOGOUT Ends the current session and allows you to log onto the web server as a different user VISUALISATION Allows switching to the VISUALISATION area and therefore accessing the visualisation now showing all modifications made in the configuration 16 merten by Schneider Electric U motion KNX Server Installation Manual 2 4 NAVIGATION MENU 2 4 1 USAGE The navigation menu is a typical tree view menu After accessing the ADMINISTRATION area all the main entries are shown the sub menus are accessed by extending the corresponding main menu The navigation in this menu is done enti
116. oup addresses can be selected here If no special configurations in U motion KNX Server have been made only the integrated KNX interface is available By clicking NEXT the import process is started which will last a few minutes depending of the size of the ETS project to import U motion KNX Server will automatically create the appropriate KNX objects which can be used to create the graphical visualisation Once the import process is finished a summary of all actions is shown 40 merten U motion KNX Server by Schneider Electric Installation Manual TANT Ce DATH ara Lian la rik Ten Leere ac tn T F F F As soon as the project is imported U motion KNX Server checks if the single KNX objects are matching an ETS import rule If for a KNX object at least one ETS import rule is matching it will be applied no additional configuration of these objects will be necessary If all created KNX objects match at least one ETS import rule after some seconds the section ETS IMPORT RULES will disappear and by clicking NEXT the import procedure can be completed the communication service is restarted automatically so that the web server can manage all the new created objects Version 1 0 0 RC 9 SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION A y ETS import Import ETS project 1 gt Setup Imported objects customization Technologies Executed operations Sl Existing KNX group addresses 38 gt Visua
117. ous situation may arise that may cause damage to material Note u Hint and additional notes merten U motion KNX Server by Schneider Electric Installation Manual SAFETY INSTRUCTIONS The present operating instructions contain those safety instructions that are required to safely operate the machine All persons working with the machine must heed the present operating instructions especially the safety instructions In addition all local stipulations governing the prevention of accidents must be heeded Only trained and authorized personnel may install and operate the machine Proper application The machine has been designed for application in a building environment The machine meets the requirements of the EMC guidelines and of the harmonized European standards Modifications to the machine hardware may affect the system s EMC compatibility Without special protection measures the machine must not be used in EX areas and in plants that require special moni toring Danger of explosion Do not expose the buffer batteries to heat Serious injury may be the result The operating voltage of the machine must be within the specified range The product label provides the required infor mation merten INDEX 1 First Commisstoning 1 1 Introduction 1 2 Content of the Packaging 1 3 Installation Connection and Commissioning 1 3 1 Installation and Connection 1 3 2 Environmental Conditions 1 3 3 Commissioning 1 4 Network Connection
118. phical appearance to the single data points depending on the configured criteria The available criteria are data type length encoding and user definable keywords which have to be included in the name of the group addresses for whom the corresponding ETS import rule should be applied In U motion KNX Server some ETS import rules which apply to generically used data points are already predefined adjusting the ETS import rules is worthwhile since it will make the personalization of a lot of data points after the import no more necessary Following parameters can be defined KEYWORD One or more keywords of which at least one must be present in the name of a group address of the imported KNX project so that the ETS import rule will be applied correctly When multiple keywords are specified they must be separated by a comma blank spaces are recognized as part of the keyword TYPE Length in bit byte of the target group addresses in the KNX project ENCODING Encoding to be used by U motion KNX Server in order to interpret the KNX bus data correctly the available encodings depend on the data length defined in TYPE FUNCTION During the import process U motion KNX Server for each group address present in the KNX project creates a KNX object in its internal database Each KNX object created from a group address for which an ETS import rule was applied will be automatically assigned to the here defined FUNCTION category during the
119. r more information about the possible actions with other objects consult the appropriate chapters of this manual VALUE If the target object supports it you can set the value the target object should be set whenever the event is triggered the available values depend on the type of the target object It is also possible to set the target object to the same value as the triggering object Value of or its inverted value Inverted value of When you create an active event the object that you are currently working on will be the object that triggers the event If you instead create a passive event the object that is added to the appropriate area will be the one triggering the event 51 merten U motion KNX Server by Schneider Electric Installation Manual 5 8 KNX SCENARIOS Objects of type 1 byte during the ETS import can be defined as KNX scenarios With these objects no status feedbacks or single commands are transferred but a number usually between 1 and 64 which tells the installed devices the KNX sce ne they should load from their memory all states saved for the loaded scene will be set from the device Some KNX de vices can save various states for such a KNX scenario Depending from the value they receive on the group address of the scenario they can launch different actions and set different states of functions A KNX object can be defined as KNX scenario as follows e Open the ADMINISTRATION menu and
120. rea Tab 1 Tab 2 Tab 3 The DISPLAY is an area for showing status and feedback information of KNX objects It is divided in the following sections DISPLAY VALUE CENTER Value shown in the center of the display area DISPLAY VALUE UP LEFT Value displayed in the configured corner of the display area DISPLAY VALUE UP RIGHT Each value can be displayed in combination with a selectable label DISPLAY VALUE DOWN LEFT DISPLAY VALUE DOWN RIGHT The MAIN AREA can contain up to 10 objects which will be positioned one under the other If a label is defined for one of these objects it will be displayed above the corresponding object in the MAIN AREA The lower section allows adding up to 30 additional objects structured in 3 tabs where each tab can contain up to 10 objects If a label for an object is defined this label will be shown above the corresponding object Switching between the various tabs is done by clicking on the label of the corresponding tab tabs not containing any objects won t be dis played re merten U motion KNX Server by Schneider Electric Installation Manual Even for complex objects with the TEMPLATE GENERIC always the same approach for adding objects is used search the desired objects with the search function and pull them into the corresponding area then select functionality define the label optional if desired enable an object for scheduling and select the functionality the selection of functional
121. rely with a mouse Clicking on an entry in the navigation menu turns the clicked entry into grey if the entry has additional submenus the entry will be extended and the sub menus are displayed Another click on the selected entry will close the section and hide the submenus again SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION CD Scenarios GO p Seah reais Scenarios CLOSE v Setup Language Name Description ETS name State Details Network Update X pinscen Stop Backup Restore Y X update scen Stop Date Time v Technologies X stopscen Stop gt KNX start scen Stop Video surveillance gt Intercom X client redirect testing Stop v Energy gt Consumption X client redirect bing Stop Loads X New Scenario 7 Stop Import Export Customization X New Scenario 8 Stop Themes eg X _ New Scenario 9 Stop Navigation menu Favourites X New Scenario 10 Stop Options ee X New Scenario 11 Stop v Visualisation gt Rooms X New Scenario 12 Stop Functions Bike X New Scenario 13 Stop X New Scenario 14 Stop pinscen update scen X New Scenario 15 Stop stop scen X New Scenario 16 Stop D ctor client redirect testing X New Scenario 17 Stop ci aan hina If actions can be performed for the selected entry they will be displayed in the TOOLBAR at the bottom left corner of the navigation menu in form of different buttons The following actions may be displayed
122. roup addresses on U motion KNX Server they can also be used to keep the group addresses count on U motion KNX Server low This is very useful if a lot of so called dummy group addresses are present in the KNX project Furthermore VIRTUAL OBJECTS can be integrated in the VISUALISATION connected to scenarios or events passive as well as active etc Another example for the use of VIRTUAL OBJECTS is the creation of central functions where a VIRTUAL OBJECT controls numerous KNX objects simultaneously To create a new VIRTUAL OBJECT open the ADMINISTRATION menu select ADVANCED FUNCTIONS VIRTUAL OBJECTS and press the ADD button a new VIRTUAL OBJECT will be created which offers the following settings NAME Identifies the object inside the VISUALISATION DESCRIPTION Additional information that can simplify the search ICON Graphical symbol through which the object is represented in the VISUALISATION All symbols available for KNX objects are available also for this object the choice of the corresponding icon is upon the user VALUE TYPE The value type of the object can be defined here e Boolean can assume only the value 1 or O e Numeric Integer numeric value without comma e Numeric Float numeric value with comma e _ String text 88 merten U motion KNX Server by Schneider Electric Installation Manual In the expert mode the additional settings are availabl
123. rver offers an integrated load control which can be reached through the configuration area by selecting TECHNOLOGIES ENERGY LOADS and finally LOAD CONTROL Of course it is possible to create additional load controls which then can be used in parallel to the standard configuration e g one load control per phase in a 3 phase system je merten U motion KNX Server by Schneider Electric Installation Manual If the pre configured LOAD CONTROL entry is selected and its properties window is opened you will see the following screen Version 1 0 0 RC 9 SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION Load control Load control CLOSE STOP gt Setup v Technologies gt KNX Name Load control Video surveillance gt Intercom v Energy gt Consumption Cycle time s 5 Seconds r a Cycles until break 3 re Cycles until restart 60 Load Max priority value 4 M Load A Control type Active z Load Execution state Play Import Export gt Customization cLose EEE gt Visualisation Advanced functions ot FADD Users and permissions Name Check un The section REPRESENTATION offers the following parameters CYCLE TIME Time in seconds of the base cycle of the integrated load control logic When this time expires the loads are controlled the configured limits are checked and eventual actions take place CYCLES UNTIL BREAK Amount of base cycles wh
124. s instead are opened using the browser plugin as shown in the following screen shot Cookies on the We use cookies to ensure that we give you the best experience on our website We also use cookies to ensure we show you advertising that is BBC website relevant to you If you continue without changing your settings we ll assume x Continue that you are happy to receive all cookies on the BBC website However if i you would like to you can change your cookie settings at any time Find out more BI BIC News Sport Weather Capital Future Shop TV Radio More Top News Story Autos Industry News a i J oyce Ghost Israel s ex PM O Ariel Sharon dies wa Former Israeli Prime Minister Ariel Sharon has died aged 85 after spending eight years in a coma following a stroke Rolls Royce unveils a new Ghost The automaker s very spirited new sedan a look inside Audi s next TT and Dakar dune running top the most important motoring stories of the week 83 merten U motion KNX Server by Schneider Electric Installation Manual 11 ADVANCED FUNCTIONS 11 1 INTRODUCTION In this chapter the ADVANCED FUNCTIONS of U motion KNX Server are explained in detail they can be used to expand the functionality of the bus system These functions are mostly invisible for the end user in the VISUALISATION and therefore accessible only through the ADMINISTRATION menu 11 2 LOGICS U motion KNX Server offers the possibility to create LOGICS Th
125. s method can used to display the camera signal also on mobile devices In order to configure a JPG stream please follow the steps below Please access the configuration area of U motion KNX Server Please select TECHNOLOGIES gt VIDEO SURVEILLANCE Click on the ADD button to create a new camera and access its configuration window through the EDIT function Please select Generic JPEG as video format 99 merten U motion KNX Server by Schneider Electric Installation Manual Version 1 0 0 RC 9 SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION New Camera 2 Sch rezis New Camera 2 CLOSE gt Setup ect proper es v Technologies General information gt KNX Name New Camera 2 v Video surveillance mi Enters Video format Generic JPEG x L IP address 127 0 0 1 v Intercom I IP port 80 gt VoIP participants External units Protocol HTTP v si ech Max FPS 5 e Clients Users Auto Refresh images Y e Settings Energy Represenation Customization Icon gt Visualisation N Advanced functions gt Users and permissions Appearence in planview Preview v CLOSE nnnartar vUNNELLEU cowe Since the JPG format is a generic format the configuration window will show all parameters listed in the last chapters Depending on the configuration of the used camera single parameters can be necessary or not The field IP ADDRESS in any case must co
126. s regarding the usage interaction of the software on client devices The following options are currently available ON SCREEN Permits to enable both locally U motion Builder U motion KNX Server or remote via network an on KEYBOARD screen keyboard through which it is possible to make text inputs within the software even on touch devices that don t have an own soft or hardware keyboard LOCAL amp REMOTE CLEANING Permits to enable both locally U motion Builder U motion KNX Server or remote via network a MODE special button within the TOOLBAR of the VISUALISATION by clicking on this button a cleaning page will be shown that blocks any interaction with the software for 30 seconds and therefore permits to clean the LOCAL g touch display avoiding the risk of unwanted clicks within the visualisation REMOTE 4 4 8 ADVANCED This page contains the options for the Cache technologies which are used on U motion KNX Server These caching technologies accelerate the navigation inside the VISUAISATION because the needed data is loaded on the first access on the local storage of the used client On every next access the data is already available in the local cache and the VISUALISATION can be used without any mentionable delays Additional also the refresh rate for the status of the objects in the present inside the VISUALISATION can be set The following options are here available Enable cache HTML
127. s through the checkbox beneath their title When changing the selection of group addresses the total amount of selected group addresses is refreshed and shown at the top of the page If the amount surpasses the limit of the web server the button for starting the import process will be locked After having selected the desired group addresses the import can be started by clicking on NEXT At conclusion of the import the group addresses that have to be customized manually will be shown as already explained more specifically in the last chapters It can happen that the selective import can t be concluded because some of the selected group addresses have relations to other group addresses that haven t been selected before for example feedbacks multiple relations of central functions etc In this case the following message will be shown 44 merten by Schneider Electric Setup Version 1 0 0 RC 9 Search results v Technologies Y KNX ETS import rules CSV import Configure communication ETS project gt Video surveillance Intercom Energy Customization gt Visualisation Advanced functions Users and permissions ETS import For a correct function of the system also the following group addresses need to be imported 12 0 0 12 012 12 0 21 12 0 22 12 0 23 12 0 36 12 015 12 016 SAVE In alternative please disable the option of the automatic creatio
128. sired position and drop it there to fix the entry in the new position The new sequence is shown in the VISUALISATION after accessing the FUNCTIONS menu again Further information can be found in chapter 7 of this manual 2 4 12 VISUALISATION LINKS This section allows the configuration of links Using these objects you can create page jumps to other rooms of the visualisation or even to external web contents like the contents of a web server or a homepage Further information can be found in chapter 10 of this manual 2 4 13 VISUALISATION SCENARIOS This section allows the configuration of scenarios With scenarios multiple actions can be launched sequentially if necessary also time delayed with only one click Scenarios can also be started as a passive event by other objects or via scheduling The order of the single scenarios can be changed by opening the configuration menu of the SCENARIOS entry and by moving the single scenarios to the desired position through drag and drop In EXPERT mode it is also possible to define for each scenario if it should be visible in the VISUALISATION or not Further information can be found in chapter 9 of this manual 2 4 14 VISUALISATION COMPLEX OBJECTS This section allows the configuration of so called complex objects in which KNX objects of the same device can be grouped and therefore will be accessible and operable in one of the available templates for example thermostats blinds
129. ssed directly by entering the following links inside the browsers address bar LEVEL EXAMPLE ADMINISTRATION http 192 168 0 110 umotion modules system externalframe php context configuration VISUALISATION http 192 168 0 110 umotion modules system externalframe php context runtime 43 2 merten U motion KNX Server by Schneider Electric Installation Manual os To save time during configuration both areas can be displayed simultaneously in different tabs of the browser 5 which makes it faster to switch between the areas 1 7 RESET OF THE IP ADDRESS The IP address of U motion KNX Server can be reset to factory settings through the RESET button on the bottom side of the device Localize the RESET button on the device and get a screw driver or a similar tool with a small diameter to reach the RESET button through the small cutout in the housing of the device Press the RESET button until the SERVICE LED starts blinking minimum 10 seconds afterwards release the RESET button Press the RESET button again within the next 5 seconds for max 1 2 seconds and release the RESET button afterwards after a short pause the SERVICE LED stays on for some seconds AS soon as the SERVICE LED turns off U motion KNX Server is reachable under the factory IP address 192 168 0 110 If the SERVICE LED stops blinking after the RESET button was pressed for the first time 10 seconds and before you were
130. ssover cable with your PC Open the network configuration of your PC Change the settings of the TCP IP Protocol Version 4 of the network interface on which you connected the network cable and enter the following values e IP address 192 168 0 100 e Subnet mask 255 255 255 0 e Gateway 192 168 0 110 Save the new settings depending on the installed OS a restart can be necessary The following screenshots show how to change the network settings on Windows XP Local Area Connection Properties x Internet Protocol TCPAP Properties General Advanced General ou can gel IF settings assigned automatically if your network supports this capability Othenwise you need to ask your network administrator for the appropriate IP settings Connect using Eg Realtek PCle GBE Family Controller This connection uses the following tems NwLink NetBIOS Al 7 MwLink PS Per MetBIOS Compatible Transport Prot a Internet Protocol TCF IF Obtain an IP address automatically Use the following IF address IF address 168 0 100 xi gt Subnet mask 255 255 D Default gateway 168 0 110 Description Transmission Control Protocol Internet Protocol The default Wide area network protocol that provides communication across diverse interconnected networks Use the following DNS server addresses Preferred DNS server Se BAIR Alternate DNS server C Show icon in notification area wh
131. t be defined if necessary by creating events within the properties window of the object Connection of an existing object e g KNX object via drag amp drop from within the search function In both cases it is necessary to assign to the connected objects a FUNCTIONALITY within the counter The following op tions are available POWER MEASURED Electrical power measured by a KNX network analysis device typically provided through a VALUE KNX object POWER MIN LIMIT Thresholds determining the graphical representation of the power values within the POWER MAX LIMIT VISUALISATION can also be used by the load control if the ENERGY COUNTER is used for that purpose Note if these functionalities are used previously entered static values as explained before will be ignored and hidden from the properties page LOAD OVER LIMIT ON OFF object that is triggered automatically when the limits are exceeded only when the load control is active check out next chapter LOAD PRIORITY Priority of the load used for switching on off when load control is active check out next chapter LOAD ON OFF Please use this functionalities only if the ENERGY COUNTER is used for active load control LOAD AUTO MAN check out next chapter The selection of a FUNCTIONALITY also automatically determines the graphical aspect of the related object as well as its representation in the VISUALISATION Consequently no further al
132. t port 80 for the HTTP protocol or 443 for the HTTPS protocol except the camera is using a special configuration PROTOCOL Please select HTTP or HTTPS depending on the port number specified before normally HTTP CHANNEL Number of the channel transferring the video signal please only specify a value when you are using a videoserver with more than one channel in this case for each channel of the videoserver a camera object has to be created RESOLUTION Please specify the resolution of the camera signal that U motion KNX Server should request from the camera The supported resolutions can be found within the manual or configuration menu of the used camera videoserver 97 merten U motion KNX Server by Schneider Electric Installation Manual IMAGE COMPRESSION 0 100 Allows to define the desired image compression MAX FPS The maximal frame rate frames per second can be defined here that should be used to reproduce the video APPEARANCE IN PLANVIEW Camera objects can also be used in rooms With this setting can be defined how a camera object should be shown inside a room in BACKGROUND mode e ICON The camera is shown only as icon if the icon is clicked the video stream is shown in a popup window PREVIEW The camera object is shown as window with the video stream inside Like a preview the size can be adapted as needed If you click inside the video window a popup window with the video stream insid
133. t take place in real time but periodically and whenever a value change of the object a assigned to the INTEGRATOR is taking place So if you want to check the function of an INTEGRATOR object change the value of the reference object that was assigned to the INTEGRATOR Integrator objects can also be used to trigger events in dependence of the calculated value The objects that should be controlled by such events can easily be inserted into the area ACTIVE EVENTS 11 6 NOTIFICATIONS NOTIFICATIONS are messages that U motion KNX Server sends to one or more recipients if the connected events take place There are two types of notifications ON SCREEN NOTIFICATION These notifications are shown inside the VISUALISATION in a special pop up window MAIL NOTIFICATION These notifications are sent to the configured recipients through the configured SMTP server Depending on the notification type you will see different settings In the field MESSAGE the text must be entered which the corresponding NOTIFICATION should contain If you create a new NOTIFICATION at least one object must be configured that triggers the sending of the NOTIFICA TION active event in the configuration page of the corresponding object or passive event in the configuration page of the NOTIFICATION if a NOTIFICATION is not linked to any event it will never be displayed or sent An example for an ON SCREEN NOTIFICATION can be seen below
134. t usable space will be shown Therefore the ORDER of the objects within the room should be adapted if the camera object is placed on TOP of the contained objects list it is assured that the video box will be placed at the first position in the GRID view and the empty space will be filled correctly with the remaining objects D Since the objects are placed on the RIGHT and BOTTOM side of the video box it is recommended that the I 101 merten U motion KNX Server EEE Installation Manual If the room uses the BACKGROUND view template the video box can be freely positioned as all other objects too Com pared to other objects which have a fixed size the video box can also be resized in order to fit perfectly into the visuali sation page The screenshot on the following page shows an example of a room with BACKGROUND view and integrated camera 0 9 As visible in the screenshot it is also possible to place objects directly on top of the video signal In this case when click ing on an object the corresponding action will be executed when clicking on the video signal the camera stream will be shown in a popup window showing the resolution that was specified in the settings of the camera object that in the configuration window of the room the objects must be shown ABOVE the video signal Only in this case objects can be placed on top of the video box You can change the ORDER of the objects by using the MOVE butt
135. terations adaptations of the connected objects are necessary This lastly described feature accelerates the configuration of the ENERGY COUNTERS enormously and offers especially in cases where no corresponding KNX object is available for example for limit adjustment the possibility to get the desired result fast by using VIRTUAL OBJECTS Some FUNCTIONALITIES allow a value input directly within the configuration area this for example applies for the limit values This accelerates the configuration again and furthermore it is possible to insert already default values for the end customer who can naturally adapt the values at any time in the VISUALISATION 106 merten U motion KNX Server by Schneider Electric Installation Manual The following screenshot shows the configuration of an ENERGY COUNTER with connected sub objects Version 1 0 0 RC 9 CLEAR CACHE EXPERT LOGOUT VISUALISATION Y Consumption Consumption close gt Setup Object properties v Technologies General information gt KNX Name Consumption Video surveillance gt Intercom Power v Energy i v Consumption Enable power calculation Minimum power 0 Solar power l E loade Maximum power 3000 Import Export gt Customization Graphs gt Visualisation Scale factor 2 Advanced functions Fer Unit Users and permissions Show data in graph v Show comparisons in graph Show range in graph w C
136. the PIN protection the PIN NEW PIN has to be inserted into the field NEW PIN and in REPEAT NEW PIN REPEAT NEW PIN The following screenshots shows some rooms with different templates in the U motion KNX Server VISUALISATION 59 merten U motion KNX Server by Schneider Electric Installation Manual GRID WITH IMAGE AT THE TOP 60 merten U motion KNX Server by Schneider Electric Installation Manual Q Light A Light B T Light C Light D Light scene 1 st Dimmer Blinds Par upaete MM on on stopp em ge GRID WITH IMAGE AT THE RIGHT If the visualisation is accessed through mobile devices the layout in which a room is displayed can differ from the defined template U motion KNX Server does an automatic resize of the layout in dependency of the display resolution of the used device Displays of smartphones and small tablets have too small display resolutions for showing a room in the BACKGROUND template so U motion KNX Server automatically changes the layout to GRID without any image More information about this behavior can be found in the user manual sOi merten U motion KNX Server by Schneider Electric Installation Manual The image used as background image must have a format that can be shown in a browser It is recommended to use only images in JPEG or PNG format also supports transparency The size of the images h x w
137. the UPDATE menu in the ADMINISTRATION of U motion KNX Server Choose the update package through the button Choose file or similar depends on the browser Check if the update package includes a newer version of the software current version is shown on top Click on the button UPDATE SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION CD Update 2 gt Seachresuts BU close Se v Setup Current configuration Language Software version 1 0 0RC9 Network Backup Restore wi tsi tei Date Time Update package Choose File No file chosen Technologies gt Customization UPDATE CLOSE Visualisation gt Advanced functions Users and permissions The update process runs completely automatically please wait for feedback from the page without performing other tasks or exiting the browser risk of data loss web server malfunction Depending on the configuration and software version the update may take several minutes Once the update process is completed a brief summary as well as the new software version is displayed To complete the update please click on the Restart now button which will restart the operating system of U motion KNX Server 3 5 BACKUP RESTORE This page allows the creation of a backup of your project or also the import of a previously created backup even from another U motion KNX Server or the U motion Builder t HINT FOR MAC USERS if the update package is downloaded with SAFARI or
138. the integrated mail client it will be unpacked automatically which prevents a successful update In this case please download the update package again using an alternative browser email client 29 merten U motion KNX Server by Schneider Electric Installation Manual In addition U motion KNX Server can be reset to factory settings the IP address will NOT be affected by the reset SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION A 0 1 Backup Restore mn Fr v Setup Database Language Export Save a copy ofthe current database to your PC Network Import Upload a database backup file from your PC Update Reset Restore factory settings L Date Time Background pictures Technologies Customization Export Saves a copy of the used background images on your PC gt Visualisation Import Loads a previously created background export file from your PC gt Advanced functions Users and permissions CLOSE After the desired action has been selected and in case of the import action a suitable backup has been selected click on EXECUTE and wait for the desired action to be processed Neither cancel the started action nor close the browser window during this process 3 6 DATE TIME This page allows setting several parameters related to date and time of U motion KNX Server 3 6 1 DATE TIME CONFIGURATION Permits to manually adjust the system time of the web server If in the own ETS project at le
139. the load control is active the value connected as POWER MEASURED VALUE within the ENERGY COUNTER is used as reference if this value surpasses the configured limit the load control logic is enabled once the configured cycles expire and increments the priority value in idle state 0 to 1 as a result all loads that have been set to this priority value will be turned off This process is repeated as long as the total load falls back under the configured limits until this happens the priority value is continuously incremented and the corresponding loads are switched off Once the total load falls back the load control logic will work in the opposite way as long as the load stays within the limit the loads are turned back on again in the inverted way naturally always respecting the configured cycle times and amounts See merten U motion KNX Server by Schneider Electric Installation Manual u The load control logic uses a two level limit in order to prevent hysteresis phenomena continuous switching of loads with one level limits the total load would fall back under the limit immediately after switching off a single load what would just cause the logic to turn the load back on again 13 4 3 CONNECTION OF ONE OR MORE LOADS The section LOADS within the properties window of the load control it is possible to connect one or more ENERGY COUNTERS which act as loads consumers and must be configured for all
140. then connected to the section USERS BELONGING TO THE CURRENT USER GROUP via drag amp drop Version 1 0 0 RC 9 SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION CD ro 2 Search results 1 Users CLOSE 2 gt Setup Technologies Customization Name Users gt Visualisation Advanced functions v Users and permissions CLOSE gt Users v User groups Administrators Name Powermanagers Sv L Ss user x manager X admin Name Description ETS name Type Name Description ETS name CCGC Furthermore each USER GROUP can be connected to one or several objects of the VISUALISATION this has to the consequence that these objects from now on belong to the USER GROUP and consequently can only be seen by users that belong to the chosen group The allocation of objects takes place over the search function using drag amp drop into the section OBJECTS POSSESSED EXCLUSIVELY BY THE CURRENT USER GROUP groups any longer Therefore is very important to pay attention on how objects are assigned to groups in order to avoid situations in which certain objects or even rooms become inaccessible For this reason it is recommended to connect such objects not only to the desired USER GROUP but also to the ADMINISTRATOR group in that way it is at least guaranteed that the admin user will always keep access to all kind of objects HD After the allocation of an object to a USER GROUP the object won t be visible
141. through the corresponding entry inside the NAVIGATION MENU of the visualisation area The following screenshot shows the representation of a camera 95 merten U motion KNX Server by Schneider Electric Installation Manual U motion KNX Server already offers an integrated support for different camera brands present in the market When using such a camera the integration of it can simply be done by configuring the core parameters of the camera Furthermore also cameras of different brands can be integrated by using a generic camera template however in this case you have to verify if the used camera offers its image in a supported way Further information about this topic can be found on the following pages of this manual 12 2 VISUALISATION IN LOCAL NETWORK When the camera image should be accessed in the local network a direct connection between the Client and the IP camera is created U motion KNX Server just adds a direct link to the IP address and the port of the camera to the pages of the visualisation so that the browser can get the video stream directly from the camera Therefore the video signal must not pass through U motion KNX Server what guarantees the best performance and spares the resources of U motion KNX Server The following graphic shows the video flow within the local network IP camera Switch U motion KNX Server Video flow PCI MAC 96 merten U motion KNX Server by Schneider Electric
142. tion into the Visualisation U motion KNX Server Installation Manual 251 lt aTi 2 52 _ 53 _ 54 5 7 _ 57 57 62 63 63 64 _ 64 64 65 67 _ 67 67 71 72 74 n75 _ 75 75 77 78 80 81 _ 81 81 83 merten U motion KNX Server by Schneider Electric Installation Manual 10 4 Handling inside the Visualisation 83 11 Advanced Functions 84 11 1 Introduction _ 84 11 2 Logics 84 11 3 Conditions 86 11 4 Virtual Objects 88 11 5 Integrators 89 11 6 Notifications _ 90 11 6 1 Log notifications 92 11 7 Clients and Page Jumps 93 12 IP Cameras 95 12 1 Introduction _ 95 12 2 Visualisation in Local Network 96 12 3 Axis Cameras and Videoserver 97 12 4 Mobotix Cameras 98 12 5 Generic Video Format JPG 99 12 6 Visualisation 100 13 Energy Management 103 13 1 Introduction 103 13 2 Sections 103 13 3 Consumption 104 13 3 1 Creation of a new Energy Counter 104 13 3 2 Representation in the Visualisation 107 13 3 3 Power Calculation 111 13 4 Load Control 111 13 4 1 General Settings 111 13 4 2 Connection of an Energy Counter 113 13 4 3 Connection of one or more Loads 114 13 4 4 Representation in the Visualisation 115 14 Users 118 14 1 Introduction 118 14 2 Users and User Groups 118 14 3 Create new Users 118 14 4 User Groups and Permissio
143. tomization 31 4 1 Themes 31 4 2 Navigation Menu 32 4 3 Favourites 32 4 4 Options 33 44 1 Home 33 4 4 2 Mail 34 4 4 3 Notifications 34 4 4 4 Weather 34 4 4 5 RSS Feeds 34 4 4 6 Internet Bookmark 35 4 4 7 Display Interaction 36 4 4 8 Advanced 36 5 KNX 37 5 1 Introduction _ 37 5 2 Requirements and Export of the ETS Project 37 5 2 1 OPC Import or 5 3 ETS Import Rules 38 5 4 ETS Import 39 5 5 Selective Import of an ETS Project 44 5 6 Import of a CSV File 45 5 7 KNX Object Properties 48 5 7 1 KNX Object Details 48 5 7 2 KNX Group Addresses 50 merten by Schneider Electric 5 7 3 Rooms and Connected Scenarios 5 7 4 Active and Passive Events 5 8 5 9 KNX Scenarios Physical Address of U motion KNX Server 5 10 ETS Gateway 6 Rooms 6 1 Introduction 6 2 Create new Rooms 6 3 Insert Objects into Rooms 6 4 Deleting Rooms 6 5 Customizing the BACKGROUND View 7 Functions 7 1 7 2 7 3 Introduction Administration of the Functions Functions in the Visualisation 8 Complex Objects 8 1 8 2 8 3 8 4 8 5 Introduction Create Complex Objects Object Assignment Generic Complex Object RGB LED Control 9 Scenarios 9 1 Introduction 9 2 Create Scenarios 9 3 Add Actions to a Scenario 9 4 Scenarios with Wait Commands 9 5 Customization of the Wait Commands 10 Links 10 1 Introduction 10 2 Creation of Links 10 3 Integra
144. uence re None Virtual_INIT Good night Good morning visible A Execute at startup Complex objects Advanced functions Users and permissions CLOSE Name Description ETS name Lacs In the BASE mode the following settings are available NAME Name of the SCENARIO inside the VISUALISATION ICON Graphical icon through which the SCENARIO is displayed inside the VISUALISATION VISIBLE Defines whether the scenario should be visible or not within the visualisation EXECUTE AT STARTUP If enabled the scenario will be started after the startup of the software NOTE the execution takes place only after U motion KNX Server has terminated its internal function routines and controls so after each reboot of the device and also after a restart of the communication services By switching to EXPERT mode the following additional options will be shown DESCRIPTION Additional information that can simplify the search ITERATIONS Number of repetitions This number will indicate how often the SCENARIO will be repeated Normally this parameter is set to 1 if the scenario shall be repeated several times the desired repeat value can be configured here ENABLE LEARN FUNCTION With this function it is possible to save the state of the contained KNX objects With this function the end user can customize the scenarios for his needs by setting the system in the desired state and clicking on UPDA
145. using the warning Activation of the EXPERT mode and removal of the option CREATE AUTOMATIC RELATIONS If the missing group addresses are added it s still possible that the message will appear again during the import since also the newly added group addresses could have relations to other group addresses In this case Just repeat the procedure as long as all relations are created correctly 5 6 IMPORT OF A CSV FILE U motion KNX Server also supports the import of KNX group addresses through a CSV file the file must show the following properties Columns divided through tabulator Name of the group address in the first column Group address in the second column Bit length optional in the third column 45 merten U motion KNX Server by Schneider Electric Installation Manual This file can be created as well manually for example using Microsoft Excel as also exported directly from ETS In the second case please proceed as listed below Please select the group addresses that you want to export by right clicking on their middle or main group Select the entry Export Group Addresses from the context menu g4 ETS4 Te ETS Fo New g Close Project Print F El Workplace v Eg Catalogs g Diagnostics v Topology D avy Dix b Properties F Add Areas 4 New Dynamic Folder amp b Projects EE Topology Name Descripti b Find and Replace Dynamic Folders E Settore dorsal
146. ver by Schneider Electric Installation Manual 4 4 2 MAIL This section allows configuring all parameters required for sending mails through U motion KNX Server SMTP SERVER SMTP Server for sending mails USERNAME Username for accessing the SMTP server PASSWORD Password for accessing the SMTP server ACTIVATE AUTHORIZATION Defines whether for the communication with the SMTP server a user authentication is required or not FORWARDER MAIL ADDRESS Mail address of the sender will be shown in the sent mail as address from which the mail comes from PORT Port for the communication with the SMTP server USE SSL PROTOCOL Defines whether the SSL protocol shall be used for the communication with the SMTP server or not 4 4 3 NOTIFICATIONS This page permits to configure the behavior of U motion KNX Server at incoming notifications depending on their type priority level For each type you can define whether the notification central should automatically pop up or just an advice should be shown in the HOME screen navigation menu At default settings only at incoming ALARM notifications the notification central is automatically opened 4 4 4 WEATHER In this menu the location for which the weather data should be displayed can be defined Simply specify the name of the location province region or zip code as required by the used weather service WORLD WEATHER ONLINE www worldweatheronline com D Hint P
147. w the steps listed below e Select the entry CONSUMPTION under TECHNOLOGIES ENERGY in the configuration area e Click on the EDIT button or the 3 dots beneath the entry Change the order of the ENERGY COUNTERS using the grey button as already seen with other objects too The following screenshot shows a configuration example with 2 ENERGY COUNTERS in which one of them shows the energy values produced by a photovoltaic system Yesterday Week Last Week Month Last Month Year Last Year Consumption Solar power Q gt gt 600 W 2300 W Consumption 10807 W Solar power 12404 33 W 3000 110 merten U motion KNX Server Installation Manual by Schneider Electric 13 3 3 POWER CALCULATION In case the electrical power should not be available as a KNX objects it is also possible to calculate it using a VOLTAGE object and one or more CURRENT objects To achieve this the flag ENABLE POWER CALCULATION must be checked this causes the section SUB OBJECTS FOR POWER CALCULATION to become visible Now you can follow the steps below to set up the power calculation Add a VIRTUAL OBJECT to the section SUB OBJECTS CONNECTED TO THE ENERGY COUNTER and define its FUNCTIONALITY as POWER MEASURED VALUE this value will be refreshed by U motion KNX Server every time the values of the voltage or current change Now please drag the KNX objects with the voltage and current data into the secti
148. wn as colored area The section GRAPHS will only be visible if a sub object of type POWER is connected to the ENERGY COUN TER This will be explained more in detail in the next chapter Version 1 0 0 RC 9 SAVE CLEAR CACHE EXPERT LOGOUT VISUALISATION New energy counter 3 ass New energy counter 3 _ CLOSE gt Setup u v Technologies General information KNX Name New energy counter 3 Video surveillance Intercom v Energy Powe v Consumption Enable power calculation Consumption Minimum power 0 Solar power Maximum power 3000 L Loads Power min limit 1500 Import Export P p Power max limit 2400 Customization gt Visualisation Advanced functions CLOSE Users and permissions Name Details Value Functionality ae All of these parameters can be overwritten by sub objects that can be added to the ENERGY COUNTER The parameters of such an object therefore must not be of static nature but can also be changed dynamically for example through 105 merten U motion KNX Server by Schneider Electric Installation Manual inputs of the user using VIRTUAL OBJECTS received values of KNX OBJECTS etc For this section the following actions are available Creation of a new sub object directly through the ADD button In this case a VIRTUAL OBJECT is created and connected to the counter Take care this object doesn t have any own function after its creation this mus
149. xecute Lies 11 3 CONDITIONS CONDITIONS are objects that permit to create value comparisons between one or more objects and can depending on the result of the comparison start events In order to create a new CONDITION please follow the steps below Open the ADMINISTRATION area of U motion KNX Server Select ADVANCED FUNCTIONS CONDITIONS Press the ADD button Access the configuration window of the CONDITION Enter a name for the new CONDITION Version 1 0 0 RC 9 CLEAR CACHE EXPERT LOGOUT VISUALISATION New Condition 1 gt Search results 7 New Condition 1 CLOSE gt Setup Object properties Technologies General information gt Customization Name New Condition 1 gt Visualisation v Advanced functions j Logics Logic v Conditions Reference object 0 New Condition 1 Condition Minor than x Na a a E E E E gt Integrators Ya N SS 7 gt Clients CLOSE Users and permissions Connected rooms Name Description ETS name Outputs of the condition Name Condition Action Value 86 merten by Schneider Electric U motion KNX Server Installation Manual Now a REFERENCE OBJECT for the condition must be defined Typically an object of the software is used for this purpose that can be inserted into the corresponding field through drag amp drop from the search engine Reference object When an object was drag

MEG6501-0001, MEG6501-0002

Contents

Download Pdf Manuals

Related Search

Related Contents