DMX-32 User Manual 1.Introduction
Contents
1. mor Na LIGHTING DMX 32 User Manual 1 Introduction This DMX controller has 32 Channels It could edit 16 scenes and have two working modes namely AUTO and MANUAL mode This DMX can control various lighting fixtures by sending out DMX signal 2 Specification Model DMX 32 Model Name DMX controller Power Input DC 9V SOOMA 3 Control Panel scene1 16 program blackout page mode 4 Operating Instruction 1 Programming 1 gt Delete all the previously set Scenes Steps Hold down the PROGRAM key first and then click the SCENE selection key 1 5 6 8 orderly The program indicator will light which means the controller is at an editable stage meanwhile it means that all the previously set scenes are deleted 2 gt Edit new Scenes Note This controller can edit a maximum of 16 Scenes at a time Users can find numbers 1 16 on the control interface which representing 1 16 scenes Meanwhile this controller can control up to 32 lamps Users need to use page Page A or B button to select the lamps to be controlled Page A represents 1 16 lamps Page B represents 17 32 lamps Steps When editing the number 1 16 represents 1 16 scenes accordingly Press any number from 1 16 to edit the corresponding scenes the corresponding indicator will light For example when edit No 1 scene the indicator above the No 1 will light At this point users can push slider and PAGE button to set the DMX values of each channel When2. the edition of No 1 scene is completed hold down the PROGRAM key to confirm the setting After confirmation it will enter edition of the No 2 scene automatically and the indicator above the No 2 on the interface will light Users can push slider and PAGE button to set the DMX values of each channel then press the PROGRAM key to confirm After confirmation it will enter the next SCENE automatically and orderly and the next scene is to be edited 3 gt Save the newly set Scenes When all the scenes are edited users need to save all the setting Steps Hold down the PROGRAM key then press BLACKOUT button until the program indicator turns off release the key to exit programming mode All the settings have been saved 2 Working Modes Press the MODE button there are two modes to be selected first CHASE mode second MANUAL mode Under CHASE mode fader 13 controls the operation of the direction of CHASE fader 14 controls the overall output fader 15 controls the running speed of CHASE and fader 16 controls the running FADE of CHASE In MANUAL mode user can set the output value of each channel by pushing 1 16 faders and PAGE keys
Download Pdf Manuals
Related Search