120W LED Moving Head Spot - Flash
Contents
1. 176 180 192 244 49 Gobo 4 59 Gobo 5 69 Gobo 6 79 Gobo 7 89 Gobo 1 shake slow to fast 99 Gobo 2 shake slow to fast 109 Gobo 3 shake slow to fast 119 Gobo 4 shake slow to fast 129 Gobo 5 shake slow to fast 139 Gobo 6 shake slow to fast 149 Gobo 7 shake slow to fast rotation from fast to slow rotation from slow to fast 202 Forward 255 Backward 5 Gobo rotation stop 127 Forward gobo rotation from fast to slow 133 Gobo rotation stop 255 Backward rotation from slow to fast 9 Shutter closed 250 Strobe effect slow to fsat 255 Shutter open 255 Dimmer 0 100 255 Focus In near to Out far to out far 49 Prism swing out No Prism 99 Prism swing in Static Prism 175 Forward rotation from fast to slow 179 Rotation stop 255 Backward rotation from slow to fast 191 Iris Max diameto Min diameter 223 Pulse Closing fast to slow 225 Pulse Closing slow to fast 255 XY Speed from Max _ to Min 15 Empty 45 Internet program 1 75 Internet program 2 105 Internet program 3 135 Internet program 4 www flash butrym pl Page 6 136 165 Internet program 5 166 195 Internet program 6 196 225 Internet program 7 226 225 Internet program 8 14 0 225 N A 15 0 225 N A 16 0 180 N A 181 200 Reset 201 255 N A 8 Key Features 16 bit smooth and precise resolution for PAN TILT movement 540 630 pan and 270 tilt movement scan position memory auto reposition after unexpected movement 12. experience including amongst other calculate working load limits a fine knowledge of the installation material being used and periodic safety inspection of all installation material and the fixture If you lack these qualifications do not attampt the installation yourself Improper installation can result in bodily injury Be sure to complete all rigging and installation procedures before connecting the main power cord to the appropriate wall outlet Clamp Mounting The spot LED provides a unique mounting bracket assembly that integrates the bottom of the base the included Omega Bracket and the safety cable rigging point in the unit When mounting this fixture to trusss be sure to secure an appropriately rated clamp to the included omega bracket using a M10 screw fitted through the center hole of the omega bracket As an added safety measure be sure to attached at least one properly rated safety cable to the fixture using on of the safety cable rigging point integrated in t he base assembly Regardless of the rigging option you choose for your SPOT LED always be sure to secure your fixture with a safety cable The fixture provides a built in rigging point for a safety cable on the hanging bracket as illustrated above Be sure to only use the designated rigging piont for the safety cable and never secure a safety cable to a carrying handle DMX 512 Control Connections Connect the provided XLR cable to the female 3 pin XLR output of your
3. has left the factory in perfect condition In order to maintain this condition and to ensure a safe operation it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual Important Damages caused by the disregard of this user manual are not subject to warranty The dealer will not accept liability for any resulting defects or problems If the device has been exposed to temperature changes due to environmental changes do not switch it on immediately The arising condensation could damage the device Leave the device switched off until it has reached room temperature This device falls under protection class 1 Therefore it is essential that the device be earthed www flash butrym pl Page 2 The electric connection must carry out by qualified person The device shall only be used with rate voltage and frequency Make sure that the available voltage is not higher than stated at the end of this manual Make sure the power cord is never crimped or damaged by sharp edges If this would be the case replacement of the cable must be done by an authorized dealer Always disconnect from the mains when the device in not in use or before cleaning it Only handle the power cord by the plug Never pull out the plug by tugging the power cord During initial start up some smoke or smell may arise This is a normal process and does not necessarily mean that the device is defective it shuo
4. traces of wearing and must not rotate with unbalances 4 The electric power supply cables must not show and damage material fatigue or sediments Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety problems have to be removed CUATION Disconnect from main before starting maintenance operation In order to make the lights in good condition and extend the life time we suggest a regular cleaning to the lights 1 Clean the inside and outside lens each week to avoid the weakneness of the light due to accumulation of dust 2 Clean the fan each week 3 A detailed electric check by approved electrical engineer each three month make sure that the circuit contacts are in good condition prevent the poor contact of circuit from overheating We recommend a frequent cleaning of the device Please use a moist lint free cloth Never use alcohol or solvents www flash butrym pl Page 8 There are no serviceable parts inside the device Please refer to the instruction under Installation instruction Should you need any spare parts please order geniine parts from your local dealer www flash butrym pl Page 9
5. 120W LED Moving Head Spot User Manual KEEP THIS MANUAL FOR FUTURE NEEDS www flash butrym pl Page 1 1 Dispacking Thank you for this LED Moving Head Spot For your own safety please read this manual before installing the device This manual covers the important information on installation and applications Please install and operate the fixture with folloing instructions Meanwhile please keep this manual well for future needs This LED Moving Head Spot is made of a new type of high temperature strength of engineering plastics and cast aluminum casing with nice outllook the fixture is designed and manufactured strictly following CE standards complying with international standard DMX512 protocol It s available independently controlled and linkable with each other for operation And it is applicable for large scale live performances theater studio nightclubs and discos Adopts powerful Luminus 12W CBM 360 W which features high brightness and stability Please carefully dispack it when you receive the fixture and check whether it is damaged during the transportation And please check whether the following item are included inside the bos Moving Head one Signal Cable one Omega Clamp two User Manual one Safety chain one 2 Safety Instructions CAUTION Be careful with your operations With a dangerous voltage you can Suffer a dangerous electric shock when touching wires This device
6. color wheel with 7 dichroic color plus open Variable direction rainbow effect with speed adjustable 1 rotatable gobo wheel with 7 rotatable interchangeable gobos plus open with speed adjustable stream effect dithering effect and rotatable clockwise or anticlockwise 1 static gobo wheel with 7 fixed gobos plus open 1 rotatable 3 facet prism with speed adjustable and variable direction 2 meter ti infinite electric focus 15 projection beam angle 0 100 linear dimmer with 1 18 times sec high speed electronic strobe LED shutter with variable speed 16 DMX channels DMX512 master slave and sound activeted controllable or auto operation 8 built in program 9 Techniacl Specifications Input Voltage AV90 260V 50 60Hz LED Quantities 1 120W High brightness white LED unit Control Signal DMX512 master slave and sound activated or auto operation Control Channel 16 DMX Channels www flash butrym pl Page 7 Power Consumption 240W Dimensions 230x 300x437mm Packing Dimensions 253 x 350 x 487mm Net weight 11kgs Gross Weight 12 5kgs 10 Maintenance and Cleaning The following points have to be considered during the inspection 1 All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded 2 There must not be any deformations on the housing color lenses fixations and installation spots ceiling suspension trussing 3 Mechanically moved parts must not show any
7. controller and the other side to the male 3 pin XLR input of the moving head You can chain multiple Moving head together through serial linking The cable needed should be two core screened cable with XLR input and output connectors www flash butrym pl Page 4 DMX 512 connection with DMX terminator For installation where the DMX cable has to run a long distance or is in an electrically noisy environment such as in a discotheque it is recommended to use a DMX terminator This helps in preventing corruption of the digital control signal by electrical noise The DMX terminator is simply an XLR plug with a 120 resistor connected between pins 2 and 3 which is then plugged into the output XLR socket of the last fixture in the chain 6 Menu Operations DMX Address A001 Axxx Auto Play Auto Run Music Control Reset On Off Reverse Pan On Off Reverse Tit On Off Special Reset Default On Off 7 DMX Channels 1 0 255 x 2 0 255 X 16bit 3 0 255 Y 4 0 255 Y 16Bit 5 0 15 Color open White 16 31 Color 1 32 47 Color 2 48 63 Color 3 64 79 Color 4 8 amp 0 si 95 Color 5 96 111 Color 6 112 31 Color 7 128 189 Forward rainbow effect from fast to slow 190 193 Rotation stop 194 255 Backward rainbow effect from slow tp fast 6 0 9 Rotation Gobo Wheel Open White 10 19 Gobo 1 20 29 Gobo 2 30 39 Gobe 3 www flash butrym pl Page 5 10 0 11 0 50 100
8. e the units if there are any damages or severe scratch Make sure the fixture is operated by qualified person who knows the fixture before using keep the originalpackages if any second shipment is needed Don t try to change the fixture without any instruction by the manufacturer or the appointedrepairing agencies It is not warranty range if there are any malfunctions from not following the user manual to operate or any illegal operation like shock short circuit electronic shock lamp broke etc www flash butrym pl Page 3 4 Mounting and Installation Cautions For added protection mount the fixtures in areas outside walking paths seating areas or in areas were the fixture might be reached by unauthorized person Before mounting the fixture to any surface make sure that the installation area can hold a minimum point load of 10 times the device s weight Fixture installation must always be secured with a secondary safety attachment such as an appropriate safety cable Never stand directly below the device when mounting removing or servicing the fixtre From a ceiling or set on a flat level surface see illustration below Be sure this fixture is kept at least 0 5m 1 5ft away from any flammable materials decoration etc Always use and install the supplied safety cable as a safety measure to prevent accidental damage and or injury in the event the clamp fails Mounting points Overhead mounting requires extensive
9. ld decrease gradually Please don t project the beam onto combustible substances Fixtures cannot be installed on combustible substances keep more the 50cm distance with wall for smooth air flow so there should be no shelter for fans and ventilation for heat radiation If the external flexible cable or cord of this luminaire is damaged it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard 3 Operation Instructions The moving head is for beam effect for onside decoration purpose Don t turn on the fixture if it s been through servere temperature difference like after transportation because it might damage the right due to the environment change So make sure to operate the fixture until is in normal temperature This light should be keep away from strong shaking during any transportation or movement Don t pull up the light by only the head or it might cause damages to the mechanical parts Don t expose the fixture in overheat moisture or environment with too much dust when installing it And don t lay any power cables on the floor Or it might cause electric shock to the people Make sure the installation place is in good and safety condition before installing the fixture Make sure to put the safety chain and check it whether the screws are screwed properly when installing the fixture Make sure the lens are in good condition It s recommended to replac
Download Pdf Manuals
Related Search