USER`S MANUAL - Nox
Contents
1. USERS MANUAL Read And Follow All Instructions For Use IP FOAMER nox crete chemical solutions to concrete problems www nox crete com Nox Crete Products Group 1444 S 20th St Omaha NE 68108 800 669 2738 402 341 2080 05 2014 www nox crete com USER S MANUAL INSTRUCTIONS READ THOROUGHLY BEFORE USE 1 2 3 4 o PUMP FOAMER chemical solutions to concrete problems Unscrew the pump assembly PUFPA 2 from the tank PUF2 N 2 Fill tank with desired amount of Product up to a MAXIMUM OF 1 GALLON Do not dilute Product Best foaming results are achieved if tank is filled to a maximum of 50 capacity Screw pump assembly back onto tank opening and tighten securely Twist the pump handle 1 3 of a turn counterclockwise to lock into place Using the handle pump the unit approximately 30 times or until pumping becomes difficult WARNING If the unit is over pumped and has too much pressure it will release air pressure through the pressure relief valve PUF PRV 2 MAINTENANCE amp CARE CHANGING WADDING IN SPRAY GUN AND WAND FIG 1 Unthread poly wand from spray gun FIG 2 Remove the white wadding in the poly wand WAAD 625 and dispose FIG 3 Remove washer PSG75W in spray gun The washer is reusable as FIG 4 Remove white wadding from spray gun WAAD 5 and dispose FIG 5 Insert new wadding WAAD 5 and place washer PSG75W into spray gun The pump unit should be occasionall2. Nozzle Complete Without Hose Barb i SSC38 Stainless Hose Clamp KA LY WAAD 5 Wadding For Spray Gun WAAD 625 Wadding For Wand A use Read the Product MSDS before use Never point the discharge spray wand at anyone Depressurize the unit after use Never carry the Y Y WARNING This unit is intended only for the application of Nox Crete products Consult the Product Data Sheet for proper protective wear for Y tank by the hose wand or unlocked pump handle
3. y lubricated using white lithium grease This should be done by placing the lubricant inside of the pump cylinder through the opening in the top of the cap If pumping becomes difficult additional lubrication may be necessary Clean after each use by running clean water through the unit and rinsing all parts thoroughly Over time the wadding may become plugged with sediment or debris reducing the quality and amount of foam produced Follow the instructions below to replace the wadding tg FIG 4 FIG 1 a long as it is in good shape FIG 6 Insert new wadding in poly wand WAAD 625 amp FIG 7 Attach poly wand onto spray gun FIG 2 FIG 5 PARTS LIST SCHEMATIC Contact Nox Crete for replacement parts and service 800 669 2738 402 341 2080 www nox crete com i 1444 S 20th St Omaha NE 68108 USA A FIG 6 FIG 3 PUF SL48 PUFPA 2 A HBSS1238 FIG 7 PSG12 Pen Part No Description Q HBSS1238 Stainless Hose Barb PSG12 1 2 Inch Poly Spray Gun And Handle PSGORV VITON O Ring For Spray Gun PSG12 PSG75W Washer PUF2 N 2 2 Gallon Tank PUFPA 2 Pump Assembly PUWAND Mae PUF PRV 2 Pressure Relief Valve PUF PST2 15 Inch Supply Tube PUE PST2 PUF SL48 48 Inch Hose With Tank Nut f PUWAND Foamer Wand i PWA4 NB Trigger Valve Foam
Download Pdf Manuals
Related Search