Home

User`s Manual

Contents

1. Nater a yem Administi ation 3 3 5 User Access Log User Access Log Support User Access Log Enable O Disable Folder NAS_Public gt Service AFP 7 FTP iSCSI Samba CIFS V SSH Description 1 The access log will list selected services with associated items as shown below AFP Login Logout FTP Delete Download Folder Create Login Logout Rename Upload ISCSI Login Logout Samba Delete Folder Create Folder Open Read Rename Write SSH Login Logout 2 To wew the access log please go to system log page then select desired services 3 The selected service will be restarted The User Access Log Support section allows administrators to select the desired protocols to record user activity for User Access Log Item Description User access log Enable or disable the User Access Log service Folder Select from the dropdown list where to store the user access log Service Select from the check box which access details to record Apply Click Apply to save changes Description The user access list will record different activities depending on which protocol is selected 1 AFP User login and logout 2 FTP User file deletion uploads downloads folder creation object renaming and login and logout 3 Samba User file deletion folder creation folder opening and ob ject reading renaming and writing 4 SSH if applicable User login
2. Page P Pj Event bw MAS hiy HAS hiy HAS hte MAS bh MAS hty MAS hty MAS ty MAS hty MAS ity MAS hity MAS ity MAS hty MAS fut ef anov lodded I Page Size 50 User admin logged in from 172 15 54 149 SSH service starts hiy HAS boot successfully Healthy The RAID RAID on system htr HAS is healthy now The system ktr MAS shutdown SSH service starts hi HAS boot successfully Healthy The RAID RAID on system wtr HAS is healthy now The system hty MAS shutdown SSH service starts hty NAS boot successfully Healthy The RAID RAID on system tr HAS is healthy now al Display 1 40 Record s Total 119 Record s From the System Management category choose the System Logs item and the System Logs screen will appear This screen shows a history of system usage and important events such as disk status network information and system booting O LA mtn a 2 Ol A NYA 1 m ictrati Ta Chapter 3 System Administration See the following table for a detailed description of each item System Logs Men Description EE Uaa Number of records to export This can be selected from a dropdown list to export the log s as a single file Export log option This can be set to Auto Export or Auto Delete The default logs displayed are for system events From the dropdown list administ
3. Benefits RAID improves I O performance and increases data security through fault tolerance and redundant data storage e Improved Performance RAID provides access to several hard disk drives simultaneously which greatly increases O performance e Data Security Hard disk drive failure unfortunately is a common occurrence A RAID helps prevent against the loss of data due to hard disk failure A RAID offers additional hard disk drives that can avert data loss from a hard disk drive failure If a hard drive fails the RAID volume can regenerate data from the data and parity stored on its other hard disk drives e RAID Levels The Thecus IP storage supports standard RAID levels O 1 5 6 10 and JBOD You choose a RAID level when you create a system volume The factors for selecting a RAID level are Your requirements for performance Your need for data security Number of hard disk drives in the system capacity of hard disk drives in the system The following is a description of each RAID level RAID 0 RAID 0 is best suited for applications that need high bandwidth but do not require a high level of data security The RAID O level provides the best performance of all the RAID levels but it does not provide data redundancy RAID O uses disk striping and breaking up data into blocks to write across all hard drives in the vol ume The system can then use multiple hard drives for faster read and write The stripe siz
4. 3 3 6 Syslog Management Generates system log to be stored locally or remotely it also can be chose to act as syslog server for all other devices Information can be obtained in two ways locally and remotely e Configuration with syslog server e Configuration with syslog client and target to store locally Syslog Daemon Enable C Disable Syslog Daemon Enable C Disable Syslog service server O dient Syslog service C server client Target Local Remote Target Local O Remote Syslog folder NAS Public gt Syslog folder NAS Public gt Log Level I Log Level al Remote IP lo Remote IF Address Address Apply Apply e Configuration with syslog client and target to store remotely Syslog Daemon Enable Disable Syslog service C server client Target C Local Remote Syslog folder lv Log Level Remote IP 172 16 65 147 Address See the following table for a detailed description of each item Syslog Management Enable Disable syslog daemon If Server has been selected then associated syslog folder will be used to store all system logs from other NAS devices which has assigned this system for syslog server as well as syslog of this server unit It can be seen from associated syslog folder with files error Information and warning If client has been selected then Local or Remotely can be choose Syslog service Choose Local
5. Vente File _Module_Folder_ Citrix Xen Citrx_Xenfigp_ 400K 2014 andy nobody 172 16 Create Folder aae es Xen Citrix_Xen pp_ ta al i t Noe ao Ie EE l Had F TES ET Gh id 4 E JiPe y hil a Page Sizals0 Didar L 3 Raced T Renard To export details from the User Access Log as a single file from target folder administrators must first select the desired number of records from the dropdown list and also select the Auto export option Please choose the number of logs export and click Apply to activate these settings isplay System an Level tel Export Record Delete Record Auto Refresh MWyNAS User admin logged in from 172 16 64 149 WtyMAS SSH service starts 2014 06 11 13 01 22 htyMAS MyMAS boot successfully 2014 06 11 13 01 16 WyMAS Healthy The RAID RAID on system MyNAS is healthy now 2014 06 16 14 54 05 hiehaa g e The eveteam bieba c chirtdiawn vjan v Level Export Record Delete Record Auto Refresh foam Rat Aon Dina DateTime Auto Delete Event 2014 06 11 13 07 Aut MyNAS User admin logged in from 172 16 64 149 a 2014 06 11 13 01 25 MyNAS SSH service starts TAITA AA 11 Wd 19 Thad hic Pad pat correc allar Once for example 10 000 records have been reached the log file will appear in NAS_public access_log Ji access_log J dom _backup log log_20140611_161212 dom_repair_log di syslog Chapter 3 System Administration 13
6. Incremental or Synchronize Backup Symbolic Link Choose to backup symbolic link which is included in the source Filter The filter can be set to be executed only in certain circumstances If none of them has been selected it will do the real time backup from the source to the destination in full File size From xx XXX If xx 1 and xxx blank then only file size gt xx will execute real time backup If xx 1 and xxx 2 then only size in between xx and xxx will execute real time backup If xx blank and xxx 2 then only file size lt xxx will execute real time backup Include File Type Only the associated file format will do the real time backup Exclude File Type The excluded file format won t be included in the real time backup For document file format doc xls pdf docx xlsx txt ppt pptx html htm For picture file format jog bmp tif ong pbm tga xar xom For video file format avi mpg mp4 mkv fli flv rm ram For music file format mp3 wav wma acc dss msv dvf m4p 3gp amr awb User defined can be input in other box Read the notes and check the Accept box for confirmation Local Backup gt Copy gt RAID Folder to External Device Announce 1 To perfor system backup the deshnaton file in the same directory wil be ovenwniten or deleted please confirm before munning backup 2 Destination path name exista in a different set of tasks can lead to itaet 0 athar tacks to pestorm mp
7. This product includes software developed by Softweyr LLC the University of California Berkeley and its contributors This product includes software developed by Bodo Moeller This product includes software developed by Greg Roelofs and contributors for the book PNG The Definitive Guide published by O Reilly and Associates This product includes software developed by the NetBSD Foundation Inc and its contribu tors This product includes software developed by Yen Yen Lim and North Dakota State Univer sity This product includes software developed by the Computer Systems Engineering Group at Lawrence Berkeley Laboratory This product includes software developed by the Kungliga Tekniska H gskolan and its con tributors This product includes software developed by the Nick Simicich e This product includes software written by Tim Hudson tjh cryptsoft comp This product includes software developed by Christopher G Demetriou for the NetBSD Project e CGIC License Terms Basic License CGIC copyright 1996 1997 1998 1999 2000 2001 2002 2003 2004 by Thomas Boutell and Boutell Com Inc Permission is granted to use CGIC in any application commercial or noncommercial at no cost HOWEVER this copyright paragraph must appear on a credits page accessible in the public online and offline documentation of the program Modified versions of the CGIC library should not be distributed
8. Backup There are a number of ways to back up data with the Thecus IP storage 3 8 1 Rsync Target Server When it comes to backing up your data it s very important to have flexibility Data guard provides you with many options including full backup for all shares custom backup for selected shares and volume backup Being based on the Linux operating system it is also much more stable and experiences much less frequent data loss during transfer than other remote backup systems For this tutorial you will need to use Rsync Target Server Step 1 and Data Guard Step 2 3 under Backup for this client server backup feature It also can be named for function Remote Replication Step 1 Enabling Rsync on your target backup NAS Log in to your target backup NAS through the UI in your web browser Go to Rsync Target Server under Backup in the menu of the UI Rsync Target Settings Rsync Target Server Enable O Disable sername Password sese sd Encryption Support Enable O Disable Allowed IF 1 Allowed IP 2 fs Allowed IP 3 oo Public Key Optional Please choose a file to upload F m Private Key Optional Please choose a file to upload Restore Default Eey Download Eey 1 Enable Rsync Target Server 2 Add a username and password they can be different than your NAS s username and password 3 Select Apply O psess Now Rsync is turned on your NAS which means it can be used as a target
9. Backup Folder RAID Mapping The under list shows the RAID setting in config file You can simply click the right column to change the setting RAID setting in config file RAID RADO RAIDS 68 Chapter 3 System Administration 3 8 3 Data Guard Local Backup The Thecus product provides complete backup solution between Thecus NAS systems as well as between folders of local systems ee Add sEdt Remove E Start E LRestore Log D Restore MAS Configuratan Task Hame Source Patn Source Power Target Path Last Run Tire Backup Type Status d Caiegory local 3 Remote Data backup Add a new task Edit Edit selected task Remove Remove selected task Start Click on start to start a scheduled scan task right away Stop the associated running task Also can be used if a task has been setup as real time clicking Stop can terminate the running process Simply click Start to re start the real time operation Restore Restore the associated task Click to view the associated task process details Restore NAS Configuration Click to restore the system configurations from a selected destination to a source unit O a a C 5 O From the Data Guard function list select Add The data backup setup wizard appears as below click on Local Backup Data Backup Wizard Remote Backup Backup to a remote NAS Local Backup Backup to folders devices iSCSI targets on local NAS The local backup
10. Check cs amp Networking Wireless UI System Hardware User Client Login Monitor Information Access Functions Log EP Control Panel Item Description System Management Current system status of the Thecus IP storage Storage Information and settings for storage devices installed into the Thecus IP storage File Sharing Privilege Allows configuration of users and groups Network Service To setup varies protocols which has supported by system Application Server Application based program for system build in additional installed from official or 3rd party Backup Category of Backup Features setup of the Thecus IP storage External Devices Setting for devices where has installed through external interface such as USB In the following sections you will find detailed explanations of each function and how to configure your Thecus IP storage Chapter 3 System Administration _ 3 2 3 Message Bar You can get quick information about your system status by moving your mouse over these icons Message Bar Item Status Description gt Display the status of created RAID volume Click to go to RAID Management page as short cut RAID Management Display the status of disks installed in the system Click to go to Disk information page as short cut Green Connection to the network is normal Network Red abnormal connection to the network 3 2 4 Logout Click to logout Web Ad
11. E EE 49 IOI DONS ae ar E E E E AE A E EA TES 49 3 6 10 UPnP Port Management sseseseesesessesessesessesesessesessosessosesesseseseesesesseseoseseseosesesees 50 oT VV STP Vonne inen E N R E E RE 52 3e Auto TUM OM all eea E A E E 52 Del TeDe E TN 53 3 7 Application Server sscsececcceoccecccocccccsceccsceoccecccecccecccecceccoceescecscessees DO 3 7 1 iTunes Server Built in esesssssseessessersseeseesseessesseessesseessessseoseosseosersseoseesseesersseesses 56 3 7 2 Add on Official APplications cccccscscscsecesesssesssssssssssssssessesssesesesssessssessseseeeees 56 3 7 3 3rd party App Installation ssssssssesessssssssssssesscsssssssesssssssssssesesssssssssseeeseeees 56 3 7 4 Official NAS Application e seesesessessessessseseeseesseeseeseeseeosesseeneeneesseeseeseeeeoseoseoseoseessesss 57 3 8 Backup 0000000 HHHHOHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHOOHHHHHHHHHHHHHHH8HOOH888888 58 3 8 1 Rsync Target Server ssssssssssseccrssscscscssssssscecsssososasacacnssssetatarsscesecsosssaracacsseoeocaas 58 3 8 2 Data Guard Remote BaCkuU ccsssssssssssssssssssesesesesesesesesesesssessessesesesesesesesesees 58 3 8 3 Data Guard Local Backup ssssscssssssssssssssssssssesssesesesesesesesescsesesesesesesesesesesesees 69 384 ACL BackUp and RESTO CS scssescsticcsteansssssetesansneepssusssvinteiathstictetentenabeeeeestonrtareniaces 80 OD LIAN eh OUI ae cece E E E E E A 81 3 9 E
12. Factory Default System will set back to its exit factory default settings But all data will remain with no harm Default IP LAN1 DHCP e Administrator password is admin e All user groups with asscociated ACL will clean up Resetting to factory defaults will not erase the data stored in the hard disks but WILL revert all the settings to the factory default values 3 3 13 Power Management From the System Management category choose Power Management item and the Shutdown Re boot System screen appears Press Reboot to restart the system or Shutdown to turn the system off Shutdown Reboot System 3 3 14 File System Check The File System Check allows you to perform a check on the integrity of your disks file system Under the System Management category click File system Check and the File System Check prompt ap pears File System Check Please click Appl to force file system check when the system boots up for the next time Press Apply to reboot the system now Apply To perform a file system check click Apply Once clicked the following prompt will appear File System Check x 2 The setting has been changed carry on with press Yes for confirmation Click Yes to reboot the system File System Check File System Check Done Please Wait Once the system has rebooted you will be returned to the File System Check prompt There you will see the available RAID volumes to run the file s
13. RAID Wo Asmedia_USB3 Ee RADGO ud E Intel Graphi l E LsvmM2_03 ual E N10850 E wd E N4200PRO_02 ed E N4800 Wo Nessa dai E n7510 2 Please select source folders In here we have selected the Intel Graphi and N10850 folders from the external device and imported them to the NAS under the RAID60volume Local Backup gt Import Source E Select Att Target i RAIN kd RAID 4 Return to Parent Folder E Asmedia_USB3 Intel_Graphi ud E tsvM2_03 ud N10850 j E n4200PRO_02 dy E mso ug E neeso E n7510 Total share folder count 15 Next Next please select the path from the drop down list to save the log Also give the access permission whether these selected folders will be Public or not after the import Local Backup gt Import 4 Set Public off On Intel_Graphics_V61410 NAS Public R6andy USBCopy USBHDD _Module_Folder_ _NAS Module Source_ _NAS_Picture_ andy_local eSATAHDD iSCSI iscsv502 iTunes_music m 4 Th t Read the notes and check the Accept box for confirmation If a share name already exists for the im port then the import will be rename automatically to existing share name 1 For esample if the NAS RAID volume RAID60 already has a folder named Intel_Graphics_ V614105398_XP the import folder will then be rename to Intel_Graphics_V614105398_XP
14. Select YES to allow Thecus IP storage to synchronize with an NTP server of your choice Press Apply 3 3 8 Notifications configuration w l e 7 Notification Configuration Beep Notification Enable Disable Email Notification Enable Disable Authorization Type v Security Type M SMTP Server Port SMTP Account ID Account Password Log Level v Sender s E mail Address HELO EHLO Domain Name Recipient s E mail Address 1 Recipient s E mail Address 2 Recipient s E mail Address 3 Recipient s E mail Address 4 erm Description e E mail Address does not allow space single quotation double quotation From the System Management category choose the Notifications item and the Notifications Con figuration screen appears This screen lets you have Thecus IP storage notify you in case of any sys tem malfunction Press Apply to confirm all settings See following table for a detailed description of each item Notifications Configuration Item Description _ __ Receiver s E mail Address Add one or more recipient s email addresses to receive email notifications 1 2 3 4 3 3 9 Scheduled On Off Using the Thecus IP storage System Management you can save energy and money by scheduling the Thecus IP storage to turn itself on and off during certain times of the day From the System Management category choose the Schedule
15. a User ID number or leave blank to use the system default value Enter a password in the Password box and re enter the password in the Confirm box Select which group the user will belong to Group Members is a list of groups this user be longs to Group List is a list of groups this user does not belong to Use the lt lt or gt gt buttons to have this user join or leave a group Press the Apply button and the user is created Local User Setting Group List User Name Search User ID Group ID Group Name 997 openvpn 998 saslauth 444 ssh_keys Password Confirm Password Group Members Group ID Group Name 100 users e Edit Users Select an existing user from the Local User Configuration screen Click on the Edit button and the Local User Setting screen appears From here you can enter a new password and re enter to confirm or use the lt lt or gt gt but tons to have this user join or leave a group Click the Apply button to save your changes Edit x Local User Setting Group List User Name Andy Search Po User ID 1001 Group ID Group Name 997 openvpn 998 saslauth 999 ssh_keys Password TTTTITITITTT Confirm Password TTTTTTTTTTT Group Members Group ID Group Name 100 users e Remove Users 1 Select an existing user from the Local User Configuration screen 2 Click on Remove button and the user is deleted from the system Local User Setting E
16. all system logs will be stored in an associated syslog folder filled in from next filed And the Target syslog folder will have file Associated log info to store all system logs If Remotely has been selected a syslog server is needed and an IP address is required eioarende Select from a drop down share list all of the system logs will be stored on it This syslog folder is applied to Y109 syslog server or syslog client with local selected Log Level The user can choose from 3 different levels All Warning Error or Error Remote IP Address Input the syslog server IP address if choose to store syslog info remotely 3 3 7 Date and Time Setting system time From the System Management category choose the Date and Time item and the Date and Time screen appears Set the desired Date Time and Time Zone You can also elect to synchronize the sys tem time on Thecus IP storage with an NTP Network Time Protocol Server Date 03 04 2013 E Time 15 39 Time Zone Asia Taipei NTP Service O Enable Disable Sync with an External WTP Server Yes No Select an external NTP server iclock isc org See the following table for a detailed description of each item DEE Ia EE Item _ ___ Description o gt Z SSS O Sets the system date Sets the system time Sets the system time zone Select Disable to close the NTP server synchronization Sync with external NTP
17. and logout After the User Access Log Support has been set up and the Apply button selected all selected services will restart To view user access details related to the selected service s please go to System Log and choose a service from the Display dropdown list NO w Level hii Export Record Delete Record Auto Refresh None I e Recortts oe Aoply isla Date Comp User IP Action a Event File Size 2014 andy nobody 172 16 Open FTP _Modulle_Folder_ Citrix Xen 2014 andy nobody 172 16 Open Samba _Module_Folder_ af 2014 andy nobody 17246 Write _Module_Folder_ Citrix Xen XS_5 6 Server 288K 2014 andy nobody 172 16 Write ar _Module_Folder_ Citrix Men XS_5 6 Server DIK 2014 anmdy mobody 172 1 Create AST _Module_Folder_ Citrix Xen XS_5 6_ Server 2014 andy nobody 172 16 Write Fale _Module_Folder_ Citrix Xen Citrix_MenServ 36K 2014 andy nobody 177 16 Write File _Modulle_Folder_ Citrix XenjCitrix_MenServ 32K 2014 andy mobody 172 16 VWinite File _Module_Folder_ Citrim Xen Citmx_XenServ 64k 2014 andy nobody 172 16 Verte File _Module_Folder_Otrix Xen Citi senser 4 0K 2014 andy nobody 172 16 Create Folder _Module_Folder_ Citrix Xen Citrix_XenServ 2014 andy nobody 172 16 Write File _Module_Folder_ Citrix Xen Citrx_Mentpp_ 692K 2014 andy mobody 172 16
18. devices such as digital cameras USB disks and USB printers 2 USB 2 0 Port USB 2 0 port for compatible USB devices such as digital cameras USB disks and USB printers 2 LAN Port LAN port for connecting to an Ethernet network through a switch or a router 4 Reset Button Resets the N2310 Pressing and holding the Reset button on the back for 5 seconds will reset your network setting and password and turn off Jumbo Frame Support 5 Power Connector Connect the included power cords to this connector 6 System Fan System fan that exhausts heat from the unit Chapter 2 Hardware Installation 2 1 Overview Your Thecus IP storage is designed for easy installation To help you get started the following chapter will helo you quickly get your Thecus IP storage up and running Please read it carefully to prevent damaging your unit during installation 2 2 Before You Begin Before you begin be sure to take the following precautions 1 Read and understand the Safety Warnings outlined in the beginning of the manual 2 If possible wear an anti static wrist strap during installation to prevent static discharge from damaging the sensitive electronic components on the Thecus IP storage 3 Be careful not to use magnetized screwdrivers around the Thecus IP storage s electronic com ponents 2 3 Cable Connections To connect the Thecus IP storage product to your network follow the steps below 1 Connect an Ethernet ca
19. for Rsync backup in other words only the backup NAS needs to be activated in this way 3 8 2 Data Guard Remote Backup Step 2 Setting up your backup task and schedule on your source NAS Log in to your other NAS your source NAS through the UI in your web browser Go to Data Guard under Backup in the System Management category of the UI From the Data Guard function list choose Add Add Edt Remove F Start Stop Restore YLog E Restore NAS Configuration Task Name Source Path Source Folder Target Path Last Run Time Backup Type Status Remote Data backup Item Description _ __ o Add new task Edit select task If associated task has been setup in schedule and like to start at once click on to start task right away Stop Stop the associated running task The other scenario is if a task has been setup in real time then clicking Stop can terminate the running process Simple click Start to re start the real time operation Restore the associated task Click to view the associated task in process details Restore NAS Configuration Click to restore system configuration from selected destination to source unit More details will describe in sections The data backup setup wizard appears as below click on Remote Backup e 1 Data Backup Wizard Remote Backup Backup to a remote MAS Local Backup Backup to folders devices iSCSI targets on local MAS Then 3 different selection
20. has 6 different selection you can choose from Local Backup Import External devices directly import to the NAS and generate a new shared fol Copy s Copy between folders according to the source and destination of your choit Realtime Backup Backup NAS Data Immediately Schedule Backup Backup NAS Data At Schedule Time Local Data backup This is associated with external devices which are added to the system such as USB disk You can select a folder from an external device and import it to the NAS as a share folder folder level Realtime Backup The task will be executed on the fly between the source and the target In other word any changes made PETES pethesouce vil to he detratonimmedste Schedule Backup The task will be executed on schedule between the source and the target 1 Import click on Import and a screen will appear as below If there is an external device installed on system such as USB disk then it will be listed in the Source pane Local Backup gt Import Source P Generic_USB Flash Diski 2 RAID RAID6O Please select source folders Click on the associated external device and the contain folders will be listed Select the folders that are going to be imported to the NAS and select the available RAID volume which is listed in Target pane Local Backup gt Import Source C Select Alt Target za aa 4 Return to Parent Folder F ee
21. lost profits and the cost of the installation or removal of any THECUS products the installation of replacement THECUS products and any inspection testing or redesign caused by any defect or by the repair or replacement of Products arising from a detect in any THECUS products 1 agree Don t show this message next time Following the disclaimer page you will see the Web Administration Interface From here you can configure and monitor virtually every aspect of the Thecus IP storage from anywhere on the network 6 Chapter 3 System Administration 3 2 1 Add Shourtcut The user interface with Add Shortcut allows the user to designate often used items and have them display on the main screen area The figure below displays system favorite functions eo J zS Share Folders RAID Management Administrators can add or remove favorite functions to Add Shourtcut by right clicking the mouse on the menu tree System Management i ak TE Add Shortcut 3 2 2 Control Panel The Control Panel is where you will find all of the information screens and system settings of Thecus IP storage System Management eN AUN ie lt 4 f E SNS D ag o VEN wat Daa Voy General Status System Syslog Date Notifications Scheduled Log Management and On Off Time Ta S k P A Administrator Factory Power File Wake On LAN SNMP Password Default Management System
22. of http s which allows remote access to your NAS system To begin using WebDAV and WebDAV SSL simply click enable and provide the port number The default port number is 9800 under normal circumstances this will not need to be changed WebDAV Support WebDAV 3 Enable Disable Port 900 _ WebDAV SSL Enable _ D able port 9802 Browser View Enable Disable Appir Description Port number must be gt 1024 and lt 65536 Please set WebDAV ACL at Share Folder function Browser View provide valid user view files on browsers WebDAV Configuration Item Description WebDAV Service Press the Enable button to activate WebDAV service and specify the port number if it needs to change from the default value P S Port number is limited to greater than 1024 and less than 65536 WebDAV SSL Service Press the Enable button to activate WebDAV SSL service and specify the port number if it needs to be changed from the default value P S The ort number is limited to greater than 1024 and less than 65536 Browser View Press the Enable button and viewing the share folder list through the browser will be allowed Apply Click Apply to save your changes 3 6 12 Auto Thumbnail The auto thumbnail is a function on the GUI that can be used with the Thecus T OnTheGo mobile application It helps to resize a photo while when it is on written the NAS system Enable this service allows you to speed up photo viewing on your Mobile device
23. other servers For example without ADS support an administrator might need to remove a specific user privilege on Thecus IP storage and each individual server With ADS support the change on an ADS server is known to all of its ADS members Appendix D Licensing Information e Overview This product included copyrighted third party software licensed under the terms of GNU General Public License Please see THE GNU General Public License for extra terms and conditions of this license Source Code Availability Thecus Technology Corp has exposed the full source code of the GPL licensed software For more information on how you can obtain our source code please visit our web site nttp www thecus e Copyrights This product includes cryptographic software written by Eric Young eay cryptsoft com This product includes software developed by Mark Murray This product includes software developed by Eric Young kay cryptsoft com This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http www openssl org This product includes PHP freely available from htto www php net This product includes software developed by the University of California Berkeley and its contributors This product includes software developed by Winning Strategies Inc This product includes software developed by the Apache Group for use in the Apache HTTP server project http www apache org
24. remember host name is often required However if the ISP provides only dynamic IP address the IP address of the server will change from time to time and is difficult to recall You can enable the DDNS service to solve the problem After enabling the DDNS service of the NAS whenever the NAS restarts or the IP address is changed the NAS will notify the DDNS provider immediately to record the new IP address When the user tries to connect to the NAS by the host name the DDNS will transfer the recorded IP address to the user The NAS supports the DDNS providers DyDNS org Dynamic DNS DyDNS org Custom DNS DyDNS org Static DNS ww zoneedit com WWw no ip com DDNS Support DDNS O Enable Disable Register WnDN j g D amic DNS Domain Mame Po A description for each item as following DDNS Item Description S O DDNS Service Enable or disable DDNS service Choose the service provider from the drop down list Input domain name with DDNS reoistry Click Apply to confirm the changes 3 6 10 UPnP Port Management One of the most convent way to allow users to access required services such as FTP SSH web disk and http etc from Internet environment is setting UPnP port management To set up this UPnP port forwarding feature please be sure that the router has UPnP Service Enabled The following is an example from one of the router manufacture with UPnP Configuration page UPnP Configuration UPnP Ser
25. system can only be appled to another ZFS file system 4_NAS_Module_Source_ Recursive ACL restoration doss not apply to the USBHDD usbhdd folder erie While the RAID partition is restoring backing up ACL its folders wil not be shown within the UT prg ACL restoretion backup cannot be applied to stacked folders Enri After inputting the ACL backup file and clicking the Next button the system will show another screen to list the matched folders in between the backup file and this RAID volume Just select the desired folders for the ACL restore ACL Backup Restore x Seach Folder name V _ Module Folder NAS Module _Source_ iTunes music i name E u El F W naswebsite Ei pmi WI usbcopy W usbhdd Notice The target RAID partition amp not the onginal RAID partition 80 Chapter 3 System Administration 3 8 5 Data Burn The data burn is featured to support 3 different modes of data burning for files folders to and from image file and physical optical disk The 3 different modes are Write Files folders to disc Write image to disk and Write files folders to image a a an orar FC Add data to start burning process Add Edt 7 Rempe ge eve Ap Hama af New Dic Select 1 Write Files folders to disc E p pom Adi Write file folders to disc Process add pect Qremove Remove al narmi INAS_Public U
26. target and keep all old files adding files on your target as they are added on your source but NOT deleting files on your target as they are de leted on your source Compress With this option compress the file data as it is sent to the destination machine which reduces the amount of data being transmitted something that is useful over a slow connection Backup NAS Config Enabling this will back up the source unit system configurations to the designed path on the target system Resume Partial File Handle Sparse File Try to handle sparse file efficiently so they take up less soace on the destination Keep ACL Setting It will backup not just data itself but also ACL configuration with associated folders Choose the folder to save the log details while the task is executed Speed Limit nout the bandwidth control for data backup operation Timeout Limit Setup the timeout when trying to build up a connection in between the source and the target system Enable Schedule If backup is set as Schedule please input the related period and time gD 0A After the required fields are filled and the parameters are setup click Finish to complete The data guard task will appear in the list as shown below B Add SEdit QRemove F Start T Stop G Restore Log E Restore NAS Configuration Task Name Source Fath Source Folder Target Path Last Run Time Backup Type Status SJ Category remote 1 fullbackupO1 172 16 64 13
27. the name of the system manufacturer Product No Shows the model number of the system Shows the current firmware version Displays the total run time of the system 4 y Awi y FYNI iV I OTT I 3 3 2 System Service Status From the System Management category choose the Status item System Service Status and HW Sta tus screens appear These screens provide basic system and service status information Service Status Service Status N2310 AFP Status Running CPU Activity 0 25 Yo SMBJCIFS Status Running Memory Activity 64 2 io ETP Status Running WAN LANL RX 0 0 TX 0 0 MB s UPnP Status Running Rsync Status Stopped 3 3 3 Hardware Information From the System Management category choose the Hardware Information item and the system will display the related HW details for the associated model Below is an example of the information for a Thecus N2310 General Network Interface Card Universal Serial Bus Disk Controller CPU Memory DOM 3 3 4 Logs Intel CPU CE5315 1 20GHz 801 MB Single DOM 3 Apply Display System w Laval Export Record Delete Record Date Time 2014 06 11 13 07 34 2014 06 11 13 01 25 2014 06 11 13 01 22 2014 05 11 13 01 16 2014 06 06 14 54 05 2014 05 29 11 20 04 2014 05 29 11 20 02 2014 05 29 11 19 52 2014 05 28 13 16 08 2014 05 26 16 18 35 2014 05 26 16 18 33 2014 05 26 16 18 22 2014 05 26 16 18 16 2014 05 21 18 16 10 Hd js
28. the system was already off at 16 00 PM on Monday system will stay off 3 3 10 Administrator Password From the System Management category choose the Administrator Password item and the Change Administrator Password screen appears Enter a new password in the New Password box and con firm your new password in the Confirm Password box Press Apply to confirm password changes Change Administrator Password Confirm Password Ps See the following table for a detailed description of each item Change Administrator Description o Z o gt SSS O New Password Type in a new administrator password Confirm Password Type the new password again to confirm Press this to save your changes 3 3 11 Config Mgmt From the System Management category choose the Config Mgmt item and the System Configura tion Download Upload screen appears From here you can download or upload stored system con figurations Upload Please choose a file to upload E piman See the following table for a detailed description of each item va Configuration Download Upload Download Save and export the current system configuration Upload Import a saved configuration file to overwrite the current system configuration 3 3 12 Factory Default From the System Management category choose the Factory Default item and the Reset to Factory Default screen appears Press Apply to reset Thecus IP storage to factory default settings Reset To
29. time of the test e Bad Block Scan On the Disk Information screen select a disk then click on Detect Bad Block to perform bad block scan of the associated disk The result is only for reference and the system will not take any action from its results Disk Information YS Smart Detect Bad Block Stop Detect Bad Black Disk Wo Model Capacity Firmware S N2310 2Disks i WOC WO4000F YY 2 0 3 720 GB 01 0 2 WOC WO4000F 772 0 3 726 GB 01 0 The bad block scan can be terminated by clicking on Stop Detect Bad Block Disk Information YY smart T Detect Bad Block Stop Detect Bad Block Stop bad block scar Disk Wo Model Capacity Firmware iol W310 Disks 1 WOC WO4000FY 2 0 3 726 GB 01 0 Z WDC WD4000F 0 3 726 GB 01 0 3 4 2 RAID Management From the Storage category choose the RAID Management item and the RAID Management screen appears This screen lists the RAID volumes currently residing in the Thecus IP storage From this screen you can get information about the status of your RAID volumes as well as the capacities allocated for data RAID Management Edit 63 Mas RAID Disks Total Data RAID ie Level aee Used Capacity Capacity i RAID F Healthy 1 2 7407 GB 0 2 GB 7290 8 GB RAID Management Item si Description _ gt gt O Master RAID The RAID volume currently designated as the Master RAID volume ID of the current RAID volume NOTE All RAID IDs m
30. without the attachment of a clear statement regarding the author of the modifications and this notice may in no case be removed Modifications may also be submitted to the author for inclusion in the main CGIC distribution GNU General Public License Version 2 June 1991 Copyright 1989 1991 Free Software Foundation Inc 51 Franklin St Fifth Floor Boston MA 02110 1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document but chang ing it is not allowed e PREAMBLE The licenses for most software are designed to take away your freedom to share and change it By contrast the GNU General Public License is intended to guarantee your freedom to share and change free software to make sure the software is free for all its users This General Public License applies to most of the Free Software Foundation s software and to any other program whose authors commit to using it Some other Free Software Foundation software is covered by the GNU Library General Public License instead You can apply it to your programs too When we speak of free software we are referring to freedom not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for this service if you wish that you receive source code or can get it if you want it that you can change the software or use pieces of it in new free programs and that you know you ca
31. 1 Chapter 3 System Administration 71 Announce 1 To perform system backup the destination file in the same directory will be overwritten or deleted please confirm before running backup 2 Destination path name exists in a different set of tasks can lead to itself or other tasks to perform improperly 3 Destination or source of the system files cannot be deleted otherwise it will cause the task to run improperly 4 System will automatically list the destination directory name of the duplicate to avoid data coverage errors Origin Folder Intel_Graphics_V614105398 XP Will be rename to Intel_ Graphics V614105398 XP 1 Now you will see in the data guard task list that you have created a task Task Name Source Path Source Folder Target Path Last Run Time Backup Type Status B Category local 1 import Generic_USB Intel_Graphic RAID60 2012 07 25 Import Finish And that the system has created 2 new share folders from the task just created Add Edit Remove E urs WA samba k Snapshot m ACL Folder name RAID ID File System Public Description gt DJIntel_Graphics_V614105398_XP RAID60 extd yes gt J Intel_Graphics_V614105398_XP 1 RAIDG0 extd yes gt N10850 RAIDSO ext4 yes gt NAS Public RAID ext4 yes 5 2 Copy click on Copy and this screen appears 3 different options can be selected folder to folder folder to external device or external device to fold
32. 1 Realtime Processing From the task list you can now see the newly added task fullbackO1 The backup is setup as real time From the status field Processing can be read as the back up is performed on the fly e Custom Backup The custom backup setting is similar to the full backup The only differences are explained below 1 Inputs the share folder name of target sever where the source is going to backup The sub folder can be left as blank Remote Backup gt Custom Backup Remote Target 172 16 64 131 Fort ora Encrypt with SSH Off A on Account Password Target Folder _ Connection Test Test Connection test Click Mext to continute Next Cancel 2 Select the source share folder s which are desired to be backed up to the target server You can also click on Select All from top right corner check box Remote Backup gt Custom Backup Notice Click highlight row to enter the folder Select Folders to Backup E Select All C Return to Parent Folder H E nas Pubic ud m usecopy E Module Folder_ H E nas Module 4 E nas Picture_ ud El Tunes_music S snapshot 3 Click Next and more setting appears These are the as the settings for Custom backup Remote Backup gt Custom Backup Task Name Backup Type Realtime Schedule Sync Type Sync Incremental Compress off on Backup NAS Configs off On Resu
33. 2 1907 725 WOC VD2003 OK Drei icon ge 3 Specify a RAID ID RAID Levet imo Sampi Rami System wil ist available RAD Hygi R Chapter 3 System Administration 25 4 If this RAID volume is meant to be the Master RAID volume tick the Master RAID checkbox 5 Selected whether the RAID volume will be encrypted or not The RAID volume can protect data by using RAID Volume Encryption function to prevent the risk of data exposure To activate this function the Encryption option needs to be en abled while the RAID is created and followed by a password input for identification Also an external writable USB disk plugged into any USB port on the system is required to save the password you have entered while the RAID volume is being created See the screenshot below for details RAID D ram Master RAID Take effect after checked bow iv Enorygbari 7 RAID Property Setup Parva E onim Pateond sven gew D promy n yaey Surin par reed ex Jik Aid SS Ss Once the Create button has been pressed with the Encryption checkbox enabled the following message pop up will appear for confirmation RAID Configuration Ed To encrypt RAID volume will cause performance down and you need to keve writable USE desk insert to USB port to store encrypted password Stronely recommend to backup your escrypted password te somewhere else safely of the password lose will cause date unreachable After the RAID volume has been creat
34. 62144 blocks RAID 1 2 3 4 5 System Volume Exit Code RAID 1 2 3 4 5 Data Volume Exit Code Checking group summary information Files 3 0 non 0 No 0 No errors 3 3 15 Ul Login Functions Adjusts Ul Login Configuration settings you can enable disable the Web Disk Photo Server and modules functions according to your needs Piczza WebDisk Module UI Login Functions Enable Enable Enable 20 Chapter 3 System Administration Disable Disable Disable 3 3 16 Networking From the System Management category choose Networking and the Networking Configuration screen appears This screen displays the network parameters of the global setting and available network connection You may change any of these items and press Apply to confirm your settings See a description of each item in the following table Host Settings Host Mame 231 0 Domain Mame thecus com DNS Settings Mode O Manual DHCP Get From WAN LANL DNS 1 172 16 66 243 DNS 2 164 95 1 1 DNS 3 WAN LANI Status Normal Speed 10000 MAC Address 00 14 FD 17 42 5E Link Status Connected Jumbo Frame 1500 bytes IPy4 IP 6 Enable Enable Network Configuration Global parameter Description Host name Host name that identifies the Thecus IP storage on the network Domain name Specifies the domain name of Thecus IP storage WINS Server To set a server name fo
35. ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCU RATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES END OF TERMS AND CONDITIONS
36. Auto Thumbnail Thumbnail service Enable Disable Description This feature helps users who access their photo folder wa T OnTheGo for other related app to quickly and easily browse their files Auto Thumbnail Configuration Item Description Auto Thumbnail Service Press the Enable button to activate the auto thumbnail service Apply Click Apply to save your changes a er N A i a a IN z m a m LlC hantar 2 CQuuetam ANminictratinn gt ae On L CI 32 3y SLE 1 AAL PH SU d UO YI P UAT I PIO LIU I 3 6 13 ThecusID Creating a Thecus ID will give you full access to all that Thecus has to offer After creating a Thecus ID you ll receive a free DDNS i e yourname thecuslink com You can use your DDNS to easily access your NAS make use of the mobile T OnTheGo app and share links to files with your friends In the future free cloud backup of your NAS configuration file will also be provided From here it will display the current Thecus ID and DDNS information for the associated Thecus NAS system and also the port connection status You can click logout if remote access is no longer needed 5 Thecus ID DDNS Status Thecus ID l DDNS 2310 lin External IP 203 69 212 224 Refresh Port status REAA Passed o800 Passed oo Passed For advanced setting please go to My Thecus ID bttp thecusid thecuslink com mythecusid If your Thecus NAS system is
37. D 5 RAID 6 RAID 10 model RAID configuration is usually required only when you first set up the device A brief description of each RAID setting follows RAID Levels Description JBOD The storage volume is a single HDD with no RAID support JBOD requires a minimum of 1 disk RAID O Provides data striping but no redundancy Improves performance but not data safety RAID 0 requires a minimum of 2 disks RAID 1 Offers disk mirroring Provides twice the read rate of a single disk but same write rate RAID 1 requires a minimum of 2 disks RAID 5 Data striping and stripe error correction information provided RAID 5 requires a minimum of 3 disks RAID 5 can sus tain one failed disk RAID 6 Two independent parity computations must be used in order to provide protection against double disk failure Two different algorithms are employed to achieve this purpose RAID 6 requires a minimum of 4 disks RAID 6 can sustain two failed disks RAID 10 RAID 10 has high reliability and high performance RAID 10 is implemented as a striped array whose segments are RAID 1 arrays It has the fault tolerance of RAID 1 and the performance of RAID 0 RAID 10 requires 4 disks RAID 10 can sustain two failed disks Creating RAID destroys all data in the current RAID volume The data will be unrecoverable e Edit RAID On the RAID Information screen press the Edit button to go to the RAID Information screen Using Edit RAID you can select RAID ID and
38. Do you want to delete this user we 3 5 2 Local Group Configuration From the File Sharing Privilege category choose the Group item and the Local Group Configuration screen appears This screen allows you to Add Edit and Remove local groups Add E3Edit Remove Group ID Group Name 100 users Local Group Configuration Description S O Press the Add button to add a user to the list of local groups Press the Edit button to modify a selected group from the system Press the Remove button to delete a selected group from the system 5 fC hantar 2 GQysctam AnNminictratinn 34 Chapter 3 System Administration Add Groups 1 On the Local Group Configuration screen click on the Add button The Local Group Setting screen appears Enter a Group Name Enter a Group ID number If left blank the system will automatically assign one og SS Select users to be in this group from the Users List by adding them to the Members List using the lt lt button 6 Click the Apply button to save your changes Add x Local Group Setting Users List Group Name pm_ team Search Po Group ID 101 User ID User Name 999 saslauth 998 openvpn Members List User ID User Name pm Andy Edit Groups 1 On the Local Group Configuration screen select a group name from the list 2 Press the Edit button to modify the members in a group 3 To
39. Recycle Bin Samba Recycle Bin O Enable Disable Recycle bin contents are deleted after days Set as 0 for manual deletion only Recycle Bin Folder Display Enable Disable Maximum Recycled File Size GB Set as 0 for unrestricted e Samba Service Used for letting the operating system of UNIX series and SMB CIFS of Microsoft Windows operating system Server Message Block Common Internet File System Do the link in network protocol Enable or Disable SMB CIFS protocol for Windows Apple Unix drive mapping Ofe e Samba Anonymous Login Authentication To enable this option no matter there is share folder has been created in public access The user account and password is needed from system to access under SMB CIFS protocol On the other hand no more anonymous login is allowed e Samba is Native mode 1 The Thecus IP storage is supported Samba mode options In the ADS environment with Native mode selected then Thecus IP storage is capable to become local master position e UNIX Extension The default is enable for Samba usage with situation using Mac OSX with smb connection may have permission issue When it happened please setup UNIX Extension disable to get issue solved e Samba Recycle Bin The Thecus IP storage is supported recycle bin via SMB CIFS protocol Simply enable the Recycle Bin function and Recycle Folder Display then all of deleted files folders will reside in the _NAS_Recyc
40. SBC MAS_Pubic CI USBHDO O Us8Copy w EI _Module_Folkder_ E USBHDD GLO_NAS Module Source ee a E Madule_Fakter BL NAS Picture_ a B is B eSATAHDO B UMAS_Module_Source_ a aSc pmi B _NAS_Picture_ i ESCS1_pre SATAHDE BE iTunes music Aap B ScSLpmi wi Gaptest G Sci pma nanho 0 Munes music W test api ieptest best a Click the Add button and the NAS share list appears Chapter 3 System Administration 81 b Select files folders which you would like to burn All of the selected folders fles will be seen under the disc label name New Disc The disc label name can be changed by clicking on it and press Edit from menu bar The selected folders fles also can be removed by clicking on them and then pressing remove or remove all for all selected items Wen clem ule Add dara to start burg process ap ad 2 ini ra Path Sty Mew Ue al Product Meeting Weekly Report raddete H25_PubloProduct Nesting Weebly Report LJ son akie Me Petre Aes c Select from the installed USB burning devices Please click the detect disc button to check the status once the disc is inserted d Select the burning speed from the drop down list Disc MSL WIND DRIVE UOSB2 Disc information OD R Empty Disc sace 702 82 MB Speed 2da Desc data varficaton F r e Select whether disc data verification is required or not f Click Burn to start disc burning 2 Write image fil
41. Service Enable Disable iTunes Server Mame Password fs Rescan Interval p MPS Tag Character Set liso See the following table for a detailed description of each field iTunes Configuration Password Enter a password to control access to your iTunes music Rescan Interval Rescan interval in seconds MP3 Tag Encode Specify tag encoding for MP3 files stored in Thecus IP storage All ID3 tags will be sent out in UTF 8 for Mat Once the iTunes service is enabled Thecus IP storage will make all music located in the Music folder available for iTunes equipped computers on the network 3 7 2 Add on Official Applications There are several default pre loaded official applications such as WebDisk Piczza Photo server and Transmission Kit BT download manager that can be found from the Application Server category 3 7 3 3rd party App Installation From the Application Server Category choose the Module Installation item and the Module Management screen appears Here is the entry for all of third party user module could install from oo 3rd party App Installation R App Management App File Ena Type Name Version Description Last Status Action Show in Lo Yes Admin OracleJRE 1 02 00 Provides Oracl Jd Bw x Yes User FFMPEG VLC MPLAVER 1 2 0 2 Video Tools Jj O xX Yes Admin ModBasel 1 04 01 Base module ij I x Yes Admin PHP54 1 03 00 FHF 5 4 Jj O x Yes Admin PHP5S3 1 07 00 FHF 5 3 ij O x Yes Admin Orac
42. T use chemicals or aerosols to clean Thecus IP storage Unplug the power cord and all connected cables before cleaning DO NOT place any objects on the Thecus IP storage or obstruct its ventilation slots to avoid overheating the unit Keep packaging out of the reach of children If disposing of the device please follow your local regulations for the safe disposal of electronic products to protect the environment CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Table of Contents Copyright and Trademark Notice cccccsccsccsssscccsssccccscsccceeee Il PADOUE TINS Mal vases icieesvencsevstncescnesesscrsexesedecssesuccessucscnsexscnsestses Il Limited Warranty sieren e E Safe y VV AI IIINIOS cesvsacscvaesscscensssssestssecetessssteseusisstentssesecsssesnctesecsecae lll SChapter 1 INTrOCUCTION cccccssssccssscccsssccssscccssscccsssccescsccsccce I LI QVC WIC Wir cssvececccsacsseececsceescscsseccesceconsseucusssccvesecsasessgnssecetserseussectesescas 1 WZ Package Contents cacsesscssvececssececstcecsescecstcevovivescsssccecseesessvaveceseseccvens 1 ES Front Panelen 2 T4 Rea PANG ls osar EEEE EEEE EEE 3 Chapter 2 Hardware Installation sceosscoosccosccosseooseoosseosseos A Chapter 3 System Administration cccccccccsrrsssssssssssssssseeeeO Bil E o VIC EAE E T E E E A 6 3 2 Web Administration Interface e
43. Thecus Empowering Professionals User s Manual N2310 series Copyright and Trademark Notice Thecus and other names of Thecus products are registered trademarks of Thecus Technology Corp Microsoft Windows and the Windows logo are registered trademarks of Microsoft Corporation Apple iTunes and Apple OS X are registered trademarks of Apple Computers Inc All other trademarks and brand names are the property of their respective owners Specifications are subject to change without notice Copyright 2014 Thecus Technology Corporation All rights reserved About This Manual All information in this manual has been carefully verified to ensure its correctness In case of an error please provide us with your feedback Thecus Technology Corporation reserves the right to modify the contents of this manual without notice Product name Thecus N2310 Series Manual Version 1 2 Release Date June 2014 Limited Warranty Thecus Technology Corporation guarantees all components of Thecus NAS products are thoroughly tested before they leave the factory and should function normally under general usage In case of any system malfunctions Thecus Technology Corporation and its local representatives and dealers are responsible for repair without cost to the customer if the product fails within the warranty period and under normal usage Thecus Technology Corporation is not responsible for any damage or loss of data deemed to be cau
44. a Disk Wo Model Capacity Firmware Bad Block oS M2310 Disks 1 WOC WD4000F 0 3 725 GB 01 0 z WoC WD4000F r 0 3 725 GB 01 0 Total Capacity 7452 GB WDC WD4000FY Z 0 3 7 2 WDC WD4000FY f position 7 T Disks Information Description Item Indicates disk location Shows the SATA hard disk capacity Displays the SATA hard disk model name Shows the SATA hard disk firmware version Yes to start scan Bad Block e S M A R T Information On the Disk Information screen select a disk then click on Smart to list the S M A R T info of the associated disk Disk Information F Detect Bad Block Stop Detect Bad Block Disk Wo Model Capacity Firmware J H2310 2Disks 1 WOC WD4000FYY 0 3 726 GB 01 0 2 WOC WD4000FY 0 3 726 GB 01 0 You may also perform a disk SMART test simply click Test to start the SMART test The result is only for reference and the system will not take any action from its results SMART INFO x Info Disk Wo 1 Model WDC WD4000F 772 0 Power On Hours 2114 Hours Temperature 36 C 96 8 F 34 C 93 2 F Last Reallacated Sector Count O OfLast Current Pending Sector O OfLast Test Test Type short Test Result Click to start Test Time S M A R T Information Description S Tray Number Tray the hard disk is installed in Model Model name of the installe
45. able NFS support O Advanced Click Apply to save your changes 3 6 4 FTP The Thecus IP storage can act as an FTP server enabling users to download and upload files with their favorite FTP programs From the Network Service category choose the FTP item and the FTP screen appears You can change any of these items and press Apply to confirm your settings FTP Support FTP Service 9 Enable D Disable Secure FTP Explicit Enable Disable External IP for FTP on NAT environment Passive Port Range 30000 32000 30000 ai 32000 FTP Character Set Allow Anonymous FTP Access No Access Auto Rename Upload Bandwidth Unlimited Download Bandwidth Unlimited A description of each item follows FTP FTP Security FTP Port Specifies the port number of an incoming connection on a non standard port External IP Input the public IP address of the router when the Thecus secure FTP server has been enabled This can helo to resoond to the ftp client with proper communication information Passive Port Range Limited port range for the FTP server to use 30000 32000 PEP ENCODE If your FTP client or operating system does not support Unicode e g Windows 95 98 ME or MAC OS9 8 select the same encoding as your OS here in order to properly view the files and directories on the server Available options are BIG5 HZ GB2312 GB18030 ISO EUC JP SHIFT JIS and UTF 8 Allow Anonymous FTP Access Upload Downl
46. access to a webpage providing more information i e connection test re send password etc 54 Chapter 3 System Administration he Creator in Storage Home Login Forgot Password Resend Activation Email My Thecus ID Thank you for using Thecus NAS What is Thecus ID A Thecus ID is your account for everything you do with Thecus After creating a Thecus ID you ll get a free DONS such as wow thecuslink com You can use your DONS to easily access your NAS make use of the mobile T OnTheGo app and share links to files with your friends In the future free cloud backups of your MAS configuration file will also be provided Please note that none of your information will be shared without your express permission Your DDNS is guaranteed for the duration of the warranty of your Thecus NAS 3 7 Application Server The Thecus IP storage supports built in application such as iTunes server as well as add on official or third party applications 3 7 1 iTunes Server Built in With the built in iTunes server capability Thecus IP storage enables digital music to be shared and played anywhere on the network From the Application Server category choose the iTunes item and then the iTunes Configuration screen appears You may enable or disable the iTunes Service from here Once enabled enter the proper information for each field and press Apply to save your changes iTunes Configuration iTunes
47. ackup gt Copy gt RAID Folder to External Device in EEEeeeeeE LSVM2_ 03 9 Return to Parent Foker ja ntel Graphi i mtel Graphi afi H108SO NITESI M N4MIPROO2 R andy I Realtek _LAN_ qe Ranty W008 W7 D ggofactory i temni T m35264 y5 7 liga Nam Choosing the sync type Incremental or Sync and select the log path from the drop menu list 74 Chapter 3 System Administration t _ Syne Type Log Location Announce ee ee GORY 2 RATO Foie fp eee Deis Intel_Graphics_V61410 H10630 AAS Public Agandy USBCopy USBHOD Module Folder ANAS Module Source_ _NAS Picture_ andy _iocal S54 TARDG GCS ecowsd L iTunes musik IT E Read the notes and check the Accept box for confirmation Local Backup gt Copy gt RAID Folder to External Device To parton system backup the deshmabon fie in tha same directory wil be ovenwnitten or deleted please confirm before minning backup Destination path name exists in a different set of tasks can lead to itsef or other tasks to pesfarm improparty Desbnabon or source of the system Mes cannot be deleted otherwse Wil cause the task to run improperly System wil automaticaly ist the dastination diractory name of the dupicata bo seod date coverage errors Now you will see in the data guard task list tha
48. add a user into a group select the user from the Users List and press the lt lt button to move the user into the Members List 4 Toremove a user from a group select the user from Members List and press the gt gt button 5 Click the Apply button to save your changes Edit Xx Local Group Setting Users List Group Name lpm_team Search 999 saslauth 998 openvpn Members List User ID User Name om Andy e Remove Groups 1 On the Local Group Configuration screen select a group name from the list 2 Press Remove to delete the group from the system Local Group Setting x Do you want delete this group 3 5 3 Batch Input The Thecus IP storage can also add users and groups in batch mode This enables you to convenient ly add numerous users and groups automatically by importing a simple comma separated plain text txt file From the File Sharing Privilege category click Batch Input and the Batch User and Group Creation dialogue will appear To import your list of users and groups follow these steps 1 Click the Browse icon to locate your comma separated text file The information in the text file should follow this format USERNAME PASSWORD GROUP 2 Click Open 3 Click Import to begin the user list import Batch User and Group Creation Please choose a file to upload Description Submit files containing user names passwords and group na
49. arge database information store Prior to Active Directory the Windows OS could not store additional information in its domain database Active Directory also solved the problem of locating resources which previously relied on Network Neighborhood and was slow Managing users and groups were among other issues Active Directory solved e What is Active Directory Active Directory was built as a scalable extensible directory service that was designed to meet corporate needs A repository for storing user information accounts passwords printers computers network information and other data Microsoft calls Active Directory a namespace where names can be resolved ADS Benefits ADS lets Thecus IP storage integrate itself with the existing ADS in an office environment This means the Thecus IP storage is able to recognize your office users and passwords on the ADS server Other major benefits ADS support provides include 1 Easy integration of Thecus IP storage into the existing office IT infrastructure The Thecus IP storage acts as a member of the ADS This feature significantly lowers the over head of the system administrator For example corporate security policies and user privileges onan ADS server can be enforced automatically on Thecus IP storage 2 Centralized user password database The Thecus IP storage does not maintain its own copy of the user password database This avoids data inconsistency between Thecus IP storage and
50. backup Destination path name exists in a different set of tasks can lead to itseF or other tasks to perform improperly Destination or source of the system Mes cannot be deleted otherwse it wil cause the task to run improperly Systam wil automaticaly ist the dastination dractory name of the dupicata to avid date coverage errors IW Accent Previous Fimi cana Now you will see in the data guard task list that you have created a task pAdd cpEdit Remove F Start T iip YH Restore H Log L Restore NAS Configuration Task Name Source Path Source Folder Target Path Last Run Time Backup Type Status H Category local 4 import Genenic_USE Intel Graphic RAIDGO 2012 07 25 Import Finish copy RAIDGO R andy Gener USB 2012 07 25 Copy Finish realbackoOl RAID HAS Pubhe RAIDGO R6andy 2012 07 25 Realtime Processing shdbackOl RAID NAS Puble Genenc_USB 2012 07 26 Schedule Finish Chapter 3 System Administration 79 3 8 4 ACL Backup and Restore The ACL backup and restore feature enables the system ACL Access Control List to be backed up on the RAID volume based to other location and restored if needed Let s look at the example bellow to see how it works We have one system with a RAID volume RAID select Backup to backup this RAID volume s ACL to other location The current RAID volume RAID has share folder as listed on right hand screen shot ACL Backup Restore add E
51. ble from your network to the LAN port on the back panel of the Thecus IP storage A N2310LAN port 2 Connect the provided power cord into the universal power socket on the back panel Plug the other end of the cord into a surge protector socket N2310 power socket 3 Press the power button on the Front Panel to boot up the Thecus IP storage A N2310 power button Chapter 3 System Administration 3 1 Overview The Thecus IP storage provides an easily accessible Web Administration Interface With it you can configure and monitor the Thecus IP storage anywhere on the network 3 2 Web Administration Interface Make sure your network is connected to the Internet To access Thecus IP storage Web Administra tion Interface 1 Type the Thecus IP storage IP address into your browser Default IP address can be found through IntelligentNAS utility To proper browser web page we recommend to use IE7 Firefox Safari 2 Login to the system using the administrator user name and password The factory defaults are User Name admin Password admin Once you are logged in as an administrator the disclaimer page will appear as below Please click the check box if you do not want to have this page displayed during the next login Disclaimer THECUS has no liability consequential incidental or special damages These include without limitation loss of recorded data the cost of recovery of lost data
52. cessasacecessscaceceeeas 18 3314 Fie Syste CNECK areni korinna NE EEE S 18 Ila UEO FUNC UON aese E E 20 3O IOC WV ORIN a A E E 21 3 4 Storage Management essessessessossossossossossossossessossossossossossessessess 22 341 DIK INONMA srna e EE EE E 22 BAD RAID Man gerne vassscrssnsvsnsancosdcerstdecessensteaesesdeetanteves densvaencenae EEE 24 3 5 File Sharing Privilege ecsccecsccccccecsccccccecsceccscccsccecscecssecssecesseessee 32 3 5 1 Local User CONFIGQUIAatiON ccccesecssssssscsssecssscscsssssscsescsssesessesesescseseesesesescseseeseseaees 32 3 5 2 Local Group CONFIGUIATION ccecssssesessseesssessssssssesesescsessesesescscseseeesesescseseeseseaees 34 ho io BANN apenas ee enn ee A eee ee 36 BDAY Sila A POOE ea a ETE N 36 IS UT OUO e E en ee een eae ry ere 42 3 9 0 USEF ANG Group Ba CUD i saictesseesoseszsoss dsnsececssatensvesarsecessiasepasestesesucsuad coatessosseastiseeneseees 43 3 6 Network Service iiss cccsccssnossrsecctccsascesshesvsteccesensevessensscsvessvassuieressstnne 44 Od Saale E Sy a a E E E E E E A 44 3 6 2 AFP Apple Network Setup csccssssssssssssssssssssesssescsesesescsesescsessssseseseseseseseeesees 46 DOS INF SS NO sages cesacessnsersshecessbcesssuescsbocessbanvssvesssvesassbsetcsuncs cestrabsetcatacscsnctsasaseassacateacteaneesies 46 BOs PUP nr A A E E E sete ape essa E A E eee E E ea 47 BO WDS IE E E E E EE 48 OO cil ETVE oi A E N 48 207 BONOS UN o N E E ES 49 OO 2 a E E
53. cise terms and conditions for copying distribution and modification follow TERMS AND CONDITIONS FOR COPYING DISTRIBUTION AND MODIFICATION O This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License The Program below refers to any such program or work and a work based on the Program means either the Program or any derivative work under copyright law that is to say a work containing the Program or a portion of it either verbatim or with modifications and or translated into another Language Hereinafter translation is included without limitation in the term modification Each licensee is addressed as you Activities other than copying distribution and modification are not covered by this License they are outside its scope The act of running the Program is not restricted and the output from the Program is covered only if its contents constitute a work based on the Program independent of having been made by running the Program Whether that is true depends on what the Program does 1 You may copy and distribute verbatim copies of the Program s source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an ap propriate copyright notice and disclaimer of warranty keep intact all the notices that refer to this License and to the absence of any warrant
54. d On Off item and the Scheduled On Off screen appears v Enable Scheduled On Off Action Time Action Time Sunday None x 00 00 None 00 00 y Monday None x 00 00 None 00 00 P H D 5 lt Wednesday N7 10 50 7 Power Off Y 01 00 Thursday None v 00 00 v Nore ws 00 00 Friday None Ne 00 00 Ne None 00 00 Tuesday Saturday None Y 00 00 Y None 00 00 Y Apply To designate a schedule for the Thecus IP storage to turn on and off first enable the feature by checking the Enable Scheduled On Off checkbox Then simply choose an on and off time for each day of the week Finally click Apply to save your changes Example Monday On 8 00 Off 16 00 System will turn on at 8 00 AM on Monday and off at 16 00 on Monday System will turn on for the rest of the week If you choose an on time but do not assign an off time the system will turn on and remain on until a scheduled off time is reached or if the unit is shutdown manually Example Monday On 8 00 System will turn on at 8 00 AM on Monday and will not shut down unless powered down manually You may also choose two on times or two off times on a particular day and the system will act ac cordingly Example Monday Off 8 00 Off 16 00 System will turn off at 8 00 AM on Monday System will turn off at 16 00 PM on Monday if it was on If
55. d hard disk Power ON Hours Count of hours in power on state The raw value of this attribute shows total count of hours or min utes or seconds depending on manufacturer in power on state Temperature Celsius The current temperature of the hard disk in degrees Celsius Reallocated Sector Count Count of reallocated sectors When the hard drive finds a read write verification error it marks this sec tor as reallocated and transfers data to a special reserved area spare area This process is also known as remapping and reallocated sectors are called remaps This is why on a modern hard disks you cannot see bad blocks while testing the surface all bad blocks are hidden in reallocated sectors However the more sectors that are reallocated the more a decrease up to 10 or more can be noticed in disk read write speeds Current Pending Sector Current count of unstable sectors waiting for remapping The raw value of this attribute indicates the total number of sectors waiting for remapping Later when some of these sectors are read successfully the value is decreased If errors still occur when reading sectors the hard drive will try to restore the data transfer it to the reserved disk area spare area and mark this sector as remapped If this attribute value remains at zero it indicates that the quality of the corresponding surface area is low Test Type Set short or long time to test Test Result Result of the test Total
56. dt Gre ACL Service Backup Restore Folder name o gt Raid Name v File Systerm ext4 gt DNAS Public Upload ne E E gt EQUSBCopy Recursive Applies ACL to all contained sub folders as well May extend restoration time gt CQUSBHDD t O NAS Picture gt DNAS Piczza_ Description gt DNAS twonky upload_ e When the backup ACL raid status must be healthy degraded recovery k e When the Restore ACL raid status must be healthy degraded e E _P2P_DownLoad_ e Recursive ACL restoration does not apply to the USBHDD usbhdd folder 7 e While the RAID partition is restoring backing up ACL its folders will not be shown within the UI gt O backup e ACL restoration backup cannot be applied to stacked folders t QiTunes_ music For the ACL restore it can be restored in the same system or used in another unit For example let s restore the ACL backup file to another unit This unit has a RAID volume RAIDpm with share folders as listed on right hand screen shot Shared Folders ACL Backup Restore O Gadd est Gre ACL Service Backup w Restore Folder name gt gt Raid Name RAIDpm File Systemexfs Binse upload fahepath folder acl bi _ E EJusbhdd Reoursive El Apples ACL to all contained sub folders as well May extend restoration time uso copy J naswebsite Tunes music J Module_Folder_ Raid status must be healthy degraded i ee ACL restoration from a ZFS file
57. e Enable Disable Time Machine backup folder x A description of each item follows Apple Network Configuration Item Description __ __ o O AFP Server Enable or disable Apple File Service to use the Thecus IP storage with MAC OS based systems MAC CHARSET Specifies the code paoe from the drop down list Zone Specifies Zone for Applet Talk service If your AppleTalk network uses extended networks and is assigned with multiple zones assign a zone name to the Thecus IP storage If you do not want to assign a network zone enter an asterisk to use the default setting Time Machine Click the enable checked box if you would like your MAC system to use the Thecus Daa __ sorageasMAC tmemachhnebadup destination 3 6 3 NFS Setup From the Network Service category choose the NFS item and the NFS Support screen appears The Thecus IP storage can act as an NFS server enabling users to download and upload files with their favorite NFS clients Press Apply to confirm your settings NFS Support NES Enable Disable Advanced Apply Description The _NAS_NFS_Exports_ is a system folder which cannot be accessed Please refer to the following examples of how to mount a network device NFS3 mount t nfs 192 168 2 254 raid0 data _ NAS NFS_Exports_ SAMPLE mnt sample NFS4 mount t nfs4 192 168 2 254 SAMPLE mnt sample A description of each item follows NFS Server Setting Item Description S O Enable or Dis
58. e parame ter that was set when the RAID was created determines the size of each block No parity calculations complicate the write operation RAID 1 RAID 1 mirrors all data from one hard disk drive to a second one hard disk drive thus providing com plete data redundancy However the cost of data storage capacity is doubled This is excellent for complete data security RAID 5 RAID 5 offers data security and it is best suited for networks that perform many small I O transactions at the same time as well as applications that require data security such as office automation and on line customer service Use it also for applications with high read requests but low write requests RAID 5 includes disk striping at the byte level and parity information is written to several hard disk drives If a hard disk fails the system uses parity stored on each of the other hard disks to recreate all missing information RAID 6 RAID 6 is essentially an extension of RAID level 5 which allows for additional fault tolerance by using a second independent distributed parity scheme dual parity Data is striped on a block level across a set of drives just like in RAID 5 and a second set of parity is calculated and written across all the drives RAID 6 provides for an extremely high data fault toler ance and can sustain two simultaneous drive failures This is a perfect solution for mission critical applications RAID 10 RAID 10 is implemented as a st
59. e system configuration has been backed up and necessary authentication info Confirm by doing a Connection Test to make sure the communication between the source and the target server works Add lt 3Edit Remove F Start G Restore Log G Restore NAS Configuration Task Name Source Path Source Folder Target Path Last Run Time Backup Type Status Full Backup Remote Target 172 16 64 131 Port Encrypt with SSH off on Account 3 Click Next and a screen will appear as shown below It has the listed available system configuration backup files Select the one you want and click next You also have the option to download the current system configuration before restoring from the backup file 66 Chapter 3 System Administration Custom Backup Attention Restore config will reset all configs You can click the under button to download current config file Then select the config you want to restore from the list Download Config Files List Name Date NSSS0_00 14 FD 16 8F 84_fullback 2013 01 22 10 19 04 4 After clicking Next a screen will appear as shown below Listed on the left hand side you will see the configuration backup details which contain the 3 RAID volumes On the right hand side you will see a list of single RAID volume You may roll back to previous page to recall the example we have taken Backup Folder RAID Mapping The under list shows the RAID sett
60. e to disc Liles cam ala 150 fie Write image fe to disc Disc e Sele Tene x anea Disc information Unknown Speed Disc data verification a Click Browser and the NAS share list will appear to locate the desired image file to burn 150 path 33 S45 NAS Public 0 Alinet 6600PRO W J dem_beckup_ loa J om_rapair_log Bj USBCopy i LJ USBHOD ai Modu Foller_ iO _NAS Pirture_ ESATAHDD Heci om nimpa A 9 Tunas music WJ ap J aptest i 2 snapshot a Gl test b Select the ISO file idam 150 file c Select from the installed USB burning devices Please click the detect disc button to E m Pi adici hle tir g TEP WE NAS Module Source_ HODHE d0 data NAS_Public Xen5Server 6 0 0 install cd iso namg Alinat G600PRO Product Maabng Week Raport MenSinvgr 6 0 0 istalod wo dom_backup lag dom_reger_iog productmeebtnomages isa Select eem lp ol check the status once the disc is inserted d Select the burning speed from the drop down list e Select whether disc data verification is required or not f Click Burn to start disc burning 3 Create image file from files folders ior cape ule Desc Salect Desc infomation Speed Dec data Werbication Unknown Ls a rs Click the Add button and the NAS share list will appear b Select the files folders which you would like to bur
61. e wide range of software distributed through that system in reliance on consistent application of that system it is up to the author donor to de cide if he or she is willing to distribute software through any other system and a licensee cannot im pose that choice This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License 8 If the distribution and or use of the Program is restricted in certain countries either by pat ents or by copyrighted interfaces the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries so that distribution is permitted only in or among countries not thus excluded In such case this License in corporates the limitation as if written in the body of this License 9 The Free Software Foundation may publish revised and or new versions of the General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Program specifies a version number of this License which applies to it and any later version you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation If the Program does not specify a version number of this Licen
62. e_Folder wt NAS Modu 7 g _Nas_picture_ we angy oc aj MTumes_musie CE J M2ZMPRO 02 Randy P Realtek LAN 3 W2008_ We J gaofactory Eeeeeeee A temp Next fill in the task name and related settings Schedule Backup Description Input the task name length limited to 4 12 characters Create Sub folder If you choose to create a sub folder then it will use the task name as folder name then copy the source under it Or it will copy the source to the same level as the destination Select Incremental or Synchronize Select from the drop down list where the task log will be stored Enable Schedule Click to enable If it is not checked the task won t start unless you select the associate task and click Start from the task list page Specify the time for the backup to start Schedule Can choose daily weekly or monthly 72 Chapter 3 System Administration Local Backup gt Schedule Backup gt RAID Folder to External Device Task Mame shebackO Create Subfolder i Craste named as task Don not ceate drect name backup to tangat Sync Type Incremental E Sync Log Location Sandy h Enable Schedule Time oo x doo x E Monthly P Weeldy i Daly he 4 Read the notes and check the Accept box for confirmation Annono To perfor system backup the destinabon fie in tha same directory wibe ovenyniten or deleted please confirm Defore running
63. ed you may remove the USB disk until the next time the system boots The RAID volume cannot be mounted if the USB disk with the encryption key isn t found in any system USB port when the volume is accessed To activate the encrypted volume plug the USB disk containing the encryption key and into any system USB port We strongly recommended copying the RAID volume encryption key to a safe place You can find the encryption key file from the USB disk in the following format RAID volume created date _xxxxxx key 26 Chapter 3 System Administration Please keep your USB disk in a safe place and also backup the encrypted key There is no way to rescue data back if the key is lost RAID volumes with encryption enabled will be displayed with a key lock symbol next to volume ID name 7 Specify a stripe size 64K is the default setting 8 Selected the file system you would like to have for this RAID volume PAATE p oa Ta DER ne Ht C 9 Press Submit to build the RAID storage volume Chapter 3 System Administration J7 10 Press Yes for RAID volume creation preparation Then click Finish to start up with RAID volume building Creating RAID destroys all data in the current RAID volume The data will be unrecoverable 28 Chapter 3 System Administration e RAID Level You can set the storage volume as JBOD RAID 0 RAID 1 RAID 5 RAID 6 or RAID 10 depending on RAID O RAID 1 RAI
64. ed herein You are not responsible for enforcing compliance by third parties to this License i If as a consequence of a court judgment or allegation of patent infringement or for any other reason not limited to patent issues conditions are imposed on you whether by court order agree ment or otherwise that contradict the conditions of this License they do not excuse you from the conditions of this License If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not distrib ute the Program at all For example if a patent license would not permit royalty free redistribution of the Program by all those who receive copies directly or indirectly through you then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Pro gram If any portion of this section is held invalid or unenforceable under any particular circumstance the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices Many people have made generous contributions to th
65. edium customarily used for soft ware interchange or b Accompany it with a written offer valid for at least three years to give any third party for a charge no more than your cost of physically performing source distribution a complete machine readable copy of the corresponding source code to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or C Accompany it with the information you received as to the offer to distribute corresponding source code This alternative is allowed only for noncommercial distribution and only if you re ceived the program in object code or executable form with such an offer in accord with Subsection b above The source code for a work means the preferred form of the work for making modifications to it For an executable work complete source code means all the source code for all modules it contains plus any associated interface definition files plus the scripts used to control compilation and installation of the executable However as a special exception the source code distributed need not include anything that is normally distributed in either source or binary form with the major components compiler kernel and so on of the operating system on which the executable runs unless that component itself accompanies the executable If distribution of executable or object code is made by offering access to copy from a designated place the
66. er 72 Chapter 3 System Administration RAID Folder gt RAID Folder To select more than one folder to copy to a single destination fold RAID Folder gt External Device To select more than one folder to copy to a single external device External Device gt RAID Folder Choose external device to copy to a single folder o Folder to Folder Local Backup gt Copy gt RAID Folder to RAID Folder Source Target RAID 5 RAID RAID60 RAID60 Folder to external device Local Backup gt Copy gt RAID Folder to External Device Target RAID Generic_USB RAID60 External device to Folder Local Backup gt Copy gt External Device to RAID Folder Source E Select Alt Target Q E Generic_USB 5 RAID60 Chapter 3 System Administration 73 Let s take Folder to External device as an example In the source pane select the desired RAID volume and its associated folder list will appear same method in the target pane for the associated external device Local Backup gt Copy gt RAID Folder to External Device Sue ath Retur to Parent Folder E i Return to Parent Rower x Intel Graphi LSVM2_03 i Intel Graphi PO nin N10850 P M4200PRO_O2 je REamty O Randy 5 Realtek LAH n E Wg Ww 3 ggofactory J temp E prr Select a folder from the source pane which is going to be copy over then select in target pane it s destination Local B
67. ext each user can be setup a global storage quota size for each RAID volume Simply click on Quota Size for each user and input the desired capacity After the setup is complete please click on Apply to activate the user quota size 42 Chapter 3 System Administration 1 Volume File Sys Quota GB Wsed GB 3 5 6 User and Group Backup The user and group backup feature allow system users and groups to be backed up to another location and be restored if needed Please note when restoring previous backup users and groups the current users and groups list will be replaced from this restore file s contents Please choose a file to upload B Chapter 3 System Administration 43 3 6 Network Service Use the Network Service category to make network service support settings 3 6 1 Samba CIFS There are options allow Admin to Enable Disable to operate Thecus IP storage associated with Samba CIFS protocol With the option changed it will need to reboot system to activate Samba CIFS Samba Service Enable Disable Samba Anonymous Login Authentication Enable Disable Samba Native Mode Yes Native Mode No Compatible Mode Allow Trusted Domains Yes No Block Size 4096 1024 Allocated buffering size Enable Disable Samba CIFS Options for Mac 05 X UNIX Extensions Enable Disable Hide Temporary Files Enable Disable Samba CIFS Options for
68. fy Folder Folder Name Enter the name of the folder Public Admit or deny public access to this folder Appl Press Apply to create the folder e Remove Folders To remove a folder press the Remove button from the specified folder row The system will confirm folder deletion Press Yes to delete the folder permanently or No to go back to the folder list Chapter 3 System Administration 37 38 e OINAS Public t QUSBCopy RAID ext4 yes t DUSBHDD RAID ext4 WES Used for exte t D_N amp S Picture _ RAID ext4 yes gt D_N amp s Piczza_ RAID ext no NAS Piezze t LD_NA amp S_twonky_upload_ RAID ext4 yes For Twonky b _P2P_DownLoad_ All the data stored in the folder will be deleted once the folder is deleted The data will not be recoverable Chapter 3 System Administration e NFS Share To allow NFS access to the share folder enable the NFS Service and then set up hosts with access rights by clicking Add Contig NFS share X Add NFS3 Mount point raidQ data NAS NFS Exports pm NFS4 Mount pont pm2 EzEdit Qa Remove Host Name Prviege OS Support ID Mapping Sync Async NES ij d i Jil Host Name MEE ARN OX All host please set other host soxsoosocom host range sox soxsoo eo Priviage D Read Only Vntable OS Support W Uno Linu wI A ID Mapping Guest system root account wil have full access to this share root root Guest system root account wi
69. hat the UPS device is connected to via USB or RS232 Input the IP address of your network UPS Current status of the power being supplied to the UPS Delay between power failure and first notification in seconds ure and first notification Seconds between subsequent Delay between subsequent notifications in seconds Shutdown the system when Amount of UPS battery remaining before system should auto shutdown the battery charge is less than Press Apply to save your changes Appendix A Customer Support If you are still experiencing problems with your Thecus IP storage or require a Return Merchandise Authorization RMA feel free to contact technical support via our Technical Support Website ntto www thecus com sp_tech ohp Customers in the US should send all technical support enquiries to the US contact window included in the following web page ntto www thecus com sp_tech ohp For Sales Information you can e mail us at Ssales thecus com Thank you for choosing Thecus Thecus Appendix B RAID Basics e Overview A Redundant Array of Independent Disks RAID is an array of several hard disks that provide data security and high performance A RAID system accesses several hard disks simultaneously which improves I O performance over a single hard disk Data security is enhanced by a RAID since data loss due to a hard disk failure is minimized by regenerating redundant data from the other RAID hard disks
70. he following example to see how it works The original source system has 3 RAID volume RAID RAID10 and RAID20 and has backed up the system configurations to the target server RAID Management K create pedt Global Hot Spare Mins BAD DEES Total Data Ram P Level HEL Used Capacky Capacky a RD J Healthy 10 9279GBR 11 4 GB 928 7 GB RADDOL J Healthy 9 92968 925 5 GB RAID2g J Healthy g 9279 68 926 5 GB The brand new source unit only has a 1 RAID volume RAID RAID Management Ga Create redt Goba Hot Spare Mas ID RAID Status Disks Total Data PAID Level isons Used Lapachy Lanacky a 7 RAID Healthy 10 979 GB Li 1 When adding a new backup task with Full backup or Custom backup and enabling the option Backup NAS Config as shows below the source unit system configurations are then backed up to the designed path on the target system every time the task is executed Remote Backup gt Full Backup Task Name FullBackup Backup Type Realtime Schedule Sync Type Sync Incremental Compress off On Backup NAS Configs off Resume Partial Files Off On Handle Sparse Files off On Keep ACL Settings Off On Log Location v Speed Limit oo B Secf set 0 to unlimit Timeout Limit Sec Enable Schedule 2 Click on Restore NAS Configuration and the screen shown below will appear Inout the target server s IP address where th
71. ing in config file You can simply click the right column to change the setting Custom Backup i RAID setting in config file RAID RAIDO RAID ot System needs to be reboot after configuration restoring ht 5 The backup configuration has different numbers of RAID volume than the current system 3 vs 1 It can be kept as the RAID volume mapping arranged by the system then carry on to click Finish This means that all 3 RAID volumes configuration such as share folder etc will all restore to the current unit in the RAID volume RAID 6 In other circumstances if the current unit contains 2 RAID volumes then it can be chosen from the left hand side of system backup configuration RAID volume list which RAID volume to map to the current system Let s see the following screen to make it clearer The current system has 2 RAID volumes RAID and RAIDa Select the RAID volume from the backup configuration volume list which is going to be mapped to the RAID volume of the current system Simply click on the right hand side of RAIDa and a drop down list will appear Now you can choose which volume to map with In this case the RAIDO1 volume from the system backup configuration will be mapped to the volume RAIDa of the current unit Once again it means all the shares that were created in the volume RAIDO1 will be restored to volume RAIDa of the current system Custom Backup
72. k Next 9 Click Finish E e Windows Vista To set up the Printer Server in Windows Vista follow the steps below 1 Open Printer Folder from the Control Panel JG E gt Controt Panel 41 P System and Maintenance User Accounts and Family Safety Get started with Windows Set up parental controis fnr any user Back up yo wt courts your computer Pi Add ot remot user a j Security Appearance and Personalization 4 Check fo ales Change desktop background u he color wher c Allow a program through Windows Adjust toreen resolution Firews Clock Language and Region Network and Internet Li Change keyboards or other impul methods View Network Satus and tasks Change Gapley language Set up file shanng Ease of Access Hardware and Sound Let Windows suggest settings Ogerrruze wisal chegley Piey CDs or other media automatically Punie nouse J Additional Options Programs a Jeunstall program 4 Change startup prograrm 2 Click the right mouse button in anywhere on the Printers folder and then select Add Printer Chapter 3 System Administration Q5 EA Hardware and Sound Printers 9 Search ey Favorite Links Name Documents Status Comments Location 3 fax Microsoft XPS Document EE Documents ey 0 Writer EE Pictures Ready 0 R Music More View Folders Sort By Group By Stack By Refresh Paste Control Panel Paste Shortcut 7 Additional U
73. l be mapped to anonymous user nobody nogroup on NAS Sync ASTME ta Sync i Asyne NFS Share Item Description gt OO OS Support There are two selections available e Unix Linux System e AIX Allow source port gt 1024 Choose the one which best fits your needs ID Mapping There are three selections available Guest system root account will have full access to this share root root Guest system root account will be mapped to anonymous user nobody nogroup on NAS All user on guest system will be mapped to anonymous user nobody nogroup on NAS Choose the one which best fits your needs Choose to determine the data Sync at once or Async in arranged batch Click to save your changes Chapter 3 System Administration 39 e Samba Configuration On the Folder screen press the Samba button and the Samba Configuration screen appears This screen allows you to setup samba configuration for associated folder After entering the information press Apply to activate input settings Shared Folders Gadd Edit GRemove NFS Samba Snapshot FA ACL Folder name gt gt Quota Limit RAID ID File System Public gt Dnsync RAID xfs no gt Jusbhdd RAID xfs no gt Jusbcopy RAID xfs no gt Dnaswebsite r RAID xfs yes gt DiTunes_music tines RAID xfs yes gt Module Folder_ RAID xfs yes gt D_NAS Module_Source_ _ RAID xfs yes gt Dandy eee RAID xfs no gt J andyi as RAID xfs no Samba Config
74. leJRE6 1 03 00 Provides Oracl i Bw x Yes User Piwik 7 1 0 0 Your Web An ij mx Yes User furMo CRM 2 60 5 Open Source Jj a x Yes User YouTubeDL 1 140423 0 YouTube Do ij a x Yes User PydIo 5 2 3 0 Personal Cloud i Bw x Yes User Apache Web server PHP 2 2 27 1 Web Server A 1 x F x Description Additional apps available in our App Center http www thecus com sp_app_center php 3 7 4 Official NAS Application Click on Official NAS Application from the Application Server category it will list the current system software and official application status NAS Application Fiter Update All Refresh Module Name Description Action Version Aria2 A download utilty Support Thunder p Dashboard Required module for Thecus Dashboard app for Android and i05 p Dropbox Synchronize NAS with your own personal Dropbox account 1 0 0 1 p McAfee VirusScan App for thecus NAS 1 0 1 a MySQL kit MySQL a database management system 1 0 0 1 p Piczza Fhoto album service H 1 0 0 13 pi Plex Media server m 1 1 01 System Files Thecus 05 update Please update and reboot first 056 build311 Transmission BT download station 1 0 0 9 p Twonkymedia Media serwer a WebDisk Remote data access 2 0 4 9 p XBMC Media player application for HOM Please update the latest System Files 12 2 1 1 4 fc C webserver The Apache HTTP Server a e 1 0 0 1 p Chapter 3 System Administration 5 3 8
75. le_ Associated RDID Volume share folder Samba CIFS Options for Recycle Bin Samba Recycle Bin Disable Recycle bin contents are deleted after days Set as 0 for manual deletion only Recycle Bin Folder Display Enable Disable Recycle Bin Max File Size GB Set as 0 for unrestricted For example the system has created 2 RAID volumes with ID RAIDpm and RAID Then it will have 2 recycle bin folder appear as _NAS_Recycle_RAID and _NAS_ Recycle_RAIDpm r i bl Mas RAID PAID ID a File System Status RAIDpm EXT4 Healthy a RAID AFS Healthy ge WAS IVI SUULLE _NAS_Recycle_RAID NAS Recycle _RAIDpm uh ana There are 2 more setting could help to manage the recycle bin for deleted folders fles 1 Setup the Day to remove deleted folders fles which has resided in recycle bin permanently Left default value O if desired to clean up recycle bin manually 2 Setup the Size for recycle bin to allow deleted folders fles can store Left default value 0 with no limitation Chapter 3 System Administration 45 3 6 2 AFP Apple Network Setup From the Network Service category choose the AFP item and the AFP Support screen appears This screen displays the configuration items for the Apple Filing Protocol You can change any of these items and press Apply to confirm your settings AFP Support AFP Service O Enable Disable MAC CHARSET Time Machin
76. me Partial Files off On Update Data Directh off on Handle Sparse Files off On Keep ACL Settings off on Log Location _NAS Media Speed Limit o KBseq set 0 to unlimit Timeout Limit 600 See 4 Click Finish and the data guard task will appear in the list as shown below Task Name Source Path Source Folder Target Path Last Run Time Backup Type Status J Category remote 1 custombackup RAID USBCopy snapshot 172 16 64 131 Bac Realtime Processing From the task list you can now see the newly added customback01 This backup is setup as schedule 64 Chapter 3 System Administration e iRestore To restore a backup from the backup task simply select a task from the task list then click Restore from the function bar The restore task will start to have the associated files folders from the target server restored to the source g2 Add cpEdit E Remove Start Stop q Restore Log q Restore NAS Configurabon Task Name Source Path Source Folder Target Path Last Run Time Backup Type Status tf Category remote 4 fulbackupoOl j 7 172 16 56 11 2012 06 29 Realtime Processing isceibackO1 ISCSI_pmtest 172 16 56 11 2012 06 29 Schedule Finish custombackO raidO data testi test 172 16 66 11 2012 06 29 Schedule Finish e Restore NAS Configuration This is a useful feature if the system configuration needs to be restored to a brand new unit Let s go thru t
77. mes separated by commas without any spaces each line represents one user ex Student1 password1 student_group 3 5 4 Shared Folder From the File Sharing Privilege category choose Shared Folder and the Shared Folder screen ap pears This screen allows you to create and configure folders on the Thecus IP storage volume e Adding Folders On the Folder screen press the Add button and the Add Folder screen appears This screen allows you to add a folder After entering the information press Apply to create new folder aAdd 3 wes FA samba c Foldername RAID ID File Public Public Description gt LD Dropbox RAIDO ext4 ext4 no Used for Dropbo gt LONAS_Public RADO ext4 ext4 yes gt LIUSBCopy RAIDO ext4 ext4 yes gt ED USBHOD RAIDO ext4 ext4 yes Used for extern gt E Youtube RADO ext4 ext4 yes gt _NAS Media RADO ext4 ext4 yes gt ED_NAS Piczza_ RADO ext4 ext4 no DNAS Piczza_ gt D_P2P_DownLoad_ RAIDO ext4 ext4 yes _P2P_DownLoad_ gt Qiscsitttt RADO ext4 ext4 no gt E naswebsite RAIDO ext4 ext4 yes add folder x RAID ID Folder name Public Add Folder Item Description o O O e Modify Folders On the Folder screen press the Edit button and the Modify Folder screen appears This screen allows you to change folder information After entering the information press Apply to save your changes Modify Folder x RAID ID ae Folder name backup Public Yes No Modi
78. ministration Interface Disks Information 3 2 5 Online Update Notification When there is a new update for system files or applications the system will notify you through the admin Ul and also send an email Click on the flashing icon then the system will link you directly to the associated page 2 A admin search string a 8 Chapter 3 System Administration 3 2 6 Language Selection The Thecus IP storage supports multiple Languages including N Q i Admin English Japanese naa Traditional Chinese ie Ser Simplified Chinese French German Italian Korean Spanish Russian Polish Portuguese On the menu bar click Language and the selection list ap pears This user interface will switch to the selected language for Thecus IP storage LUUVUL System Log Spanish w of gt gt gt gt HF FF HF OH F 3 3 System Management Information provides viewing on current Product info System Status Service Status and Logs The menu bar allows you to see various aspects of the Thecus IP storage From here you can discov er the status of the Thecus IP storage and also other details 3 3 1 General Once you login you will first see the basic system Information screen providing Manufacturer Product No Firmware Version and System Up Time information N2310 Manufacturer Thecus Product Mo M2310 Firmware wersion O56 build 13 Wp Time 18 minutes General Displays
79. n All of the selected folders fles will appear under the disc label name New Disc The disc label name can be changed by clicking on it and pressing Edit from the menu bar The selected folders files also can be removed by clicking on them and pressing remove or remove all for all the selected items Chapter 3 System Administration 83 ie cem de Add dya to met bimng proces Fhad e amp G Renove Al a Mew Ue c Input the path where the ISO file is going to be stored you can press the Browse button to have the share list appear d Input the ISO file name for burned image file e Click Burn to start the ISO fle burning an 3 9 External Devices The Thecus IP storage supports printer server and UPS via USB interface The integrated Print Server allows you to share a single USB printer with all users on the network For the UPS Thecus IP storage support via USB Series and Network interface The following section shows you how 3 9 1 Printers From the External Devices menu choose the Printer item and the Printer Information screen ap pears This screen provides the following information about the USB printer connected to the USB port Printer Information Printer 1 Manufacturer Ns Model NA Status No Printer Detected Remove document from queue Restart printer service Printer Information Item Description gt O Displays the name of the USB printe
80. n do these things To protect your rights we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights These restrictions translate to certain responsibilities for you if you distribute copies of the software or if you modify it For example if you distribute copies of such a program whether gratis or for a fee you must give the recipients all the rights that you have You must make sure that they too receive or can get the source code And you must show them these terms so they know their rights We protect your rights with two steps 1 copyright the software and 2 offer you this license which gives you legal permission to copy distribute and or modify the software Also for each author s protection and ours we want to make certain that everyone understands that there is no warranty for this free software If the software is modified by someone else and passed on we want its recipients to know that what they have is not the original so that any problems in troduced by others will not reflect on the original authors reputations Finally any free program is threatened constantly by software patents We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses in effect making the pro gram proprietary To prevent this we have made it clear that any patent must be licensed for every one s free use or not licensed at all The pre
81. n offering equivalent access to copy the source code from the same place counts as distribution of the source code even though third parties are not compelled to copy the source along with the object code 4 You may not copy modify sublicense or distribute the Program except as expressly provided under this License Any attempt otherwise to copy modify sublicense or distribute the Program is void and will automatically terminate your rights under this License However parties who have re ceived copies or rights from you under this License will not have their licenses terminated so long as such parties remain in full compliance 5 You are not required to accept this License since you have not signed it However nothing else grants you permission to modify or distribute the Program or its derivative works These actions are prohibited by law if you do not accept this License Therefore by modifying or distributing the Program or any work based on the Program you indicate your acceptance of this License to do so and all its terms and conditions for copying distributing or modifying the Program or works based on it 6 Each time you redistribute the Program or any work based on the Program the recipient automatically receives a license from the original licensor to copy distribute or modify the Program subject to these terms and conditions You may not impose any further restrictions on the recipi ents exercise of the rights grant
82. ndo Copy By Appearance a a Clock Langua Run as administrator Ease of Access Add Printer ES Hardware and p E AutoPlay Server Properties Personalizati 2 Power Optio Choose a local or network printer gt Add a local printer Use this option only if you don t have a USB printer Windows automatically installs USB printers when you plug them in gt Add a ESA seso or Bluetooth prong Make sure that your ampan is connected to the network or that your Bluetooth Searching for available printers You can press The printer that want isn t listed to go into next page without waiting for Searching for available printers to finish 5 Click Select a shared printer by name 86 Chapter 3 System Administration Find a printer by name or TCP IP address Browse for a printer Select a shared printer by name http lt Thecus_NAS_IP gt 631 printers usb printer Example computername printername or http computername printers printername printer Add a printer using a TCP IP address or hostname Type http lt Thecus_NAS gt 631 printers usb printer in the box where lt Thecus_NAS_IP gt is the IP address of Thecus IP storage Click Next 6 Select or install a printer and then press OK ae Select the manufacturer and model of your printer If your printer came with an installation disk click Have Disk FF your printer is not listed consult your printer documentation fo
83. not currently logged in or if DDNS has not yet been applied then it can be done here e Login Thecus NAS system Simply input your existing Thecus ID and DDNS for this Thecus NAS then press apply e Create free DDNS for your Thecus NAS With registered Thecus ID you could create DDNS for your Thecus NAS by fill in valid Thecus ID and password Then input desired DDNS name to complete DDNS creation DDNS setting Password DONS _ thecustink com Thecus ID If you don t have Thecus id please click Register button and fill up information Description For advanced setting please go to My Thecus ID hitte theeusid theouslink com mythecusid If you don t have a Thecus ID click Register and the screen below will appear Please fill in the required information and click Apply Create Thecus ID Thecus ID Password eel Middle Name e Last Name Description For advanced setting please go to My Thecus ID http thecusid thecuslink com mythecusid Register Thecus ID Item Description Thecus ID Input a valid email address It will require confirmation to activate your Thecus ID Password Input the password for your Thecus ID Confirm Password Re input the password for your Thecus ID First Name Input your First name Middle Name Input your Middle name Last Name Input your Last name Apply Click Apply to save your changes Once your ThecuslD has been registered you will be given
84. nt an announcement These requirements apply to the modified work as a whole If identifiable sections of that work are not derived from the Program and can be reasonably considered independent and separate works in themselves then this License and its terms do not apply to those sections when you distribute them as separate works But when you distribute the same sections as part of a whole which is a work based on the Program the distribution of the whole must be on the terms of this License whose permissions for other licensees extend to the entire whole and thus to each and every part regardless of who wrote it Thus it is not the intent of this section to claim rights or contest your rights to work written entirely by you rather the intent is to exercise the right to control the distribution of derivative or collective works based on the Program In addition mere aggregation of another work not based on the Program with the Program or with a work based on the Program on a volume of a storage or distribution medium does not bring the other work under the scope of this License cn You may copy and distribute the Program or a work based on it under Section 2 in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following a Accompany it with the complete corresponding machine readable source code which must be distributed under the terms of Sections 1 and 2 above on a m
85. ntain the following common items System Unit x1 QIG Quick Installation Guide x1 CD Title Universal CD x1 Ethernet Cable x1 Accessory bag x1 Multiple Language Warranty Card x1 Power adapter x1 Power cord x1 gt gt gt Please check to see if your package is complete If you find that some items are missing contact your dealer 1 3 Front Panel e N2310 The Thecus N2310 s front panel shows the device s indicators and hard disk install slots Front Panel Item 1 Power LED uu A A WW N Description Solid blue System ready Blinking blue Power on process Solid Red System with error occurred 2 System status LED Blinking white Diagnostic mode kick in Solid white Diagnostic completed Solid Red System with error occurred Blinking white HDD activity i Red HDD failure Blinking white HDD activity PAE Red HDD failure Solid white LAN Cable link AAE Blinking Network activity Solid white Installed O USB LED Blinking white USB copy activity Solid Red USB copy failure 7 USB Copy Button Copies USB storage contents to N2310 8 Power Button 9 HDD Trays Power the N2310 on off Two HDD Trays for two 2 5 3 5 SATA HDDs with Hot swappable supports 1 4 Rear Panel e N2310 The N2310 rear panel features ports and connectors 6 Back Panel Item Description 1 USB 3 0 Port USB 3 0 port for compatible USB
86. oad Allow anonymous FTP users to upload or download files to from public folders Download Allow anonymous FTP users to download files from public folders No access Block anonymous FTP user access Auto Rename If checked the system will automatically rename files that are uploaded with a duplicate file name The renaming scheme is filenamel where represents an integer Upload Bandwidth You may set the maximum bandwidth allocated for file uploads Selections include Unlimited 1 32 MB s Download Bandwidth You may set the maximum bandwidth allocated for file downloads Selections include Unlim ited 1 32 MB s To access the share folder on the Thecus IP storage use the appropriate user login and password set up on the Users page Access control to each share folder is set up on the ACL page Storage Management gt Share Folder gt ACL 3 6 5 WebService From the Network Service category choose the WebService item and the WebService Support screen appears This screen displays the service support parameters of the system You can change any of these items and press Apply to confirm your settings WebService HTTP Support Sharing Enable D Disable Port 80 Secure WebService Secure HTTP Support Sharing Enable D Disable Port 443 CertificateFile PY Certificate Key File Doo CA Certificate File a Restore All SSL Certificate Files Description 1 If a file error occurs
87. r a compatible printer Printers EF HP DeskJet 615C EF HP DeskJet 640C 547C 648C Sof HP Deskjet 6500 Series EF HP Neck let BANT t H Connecting to http 172 16 66 64 631 printers usb printer 8 You can choose to set this printer as the default printer by checking the Set as the default printer box Click Next to continue Chapter 3 System Administration 87 Type a printer name Printer name usb printer on http 172 16 66 64 631 9 Done Click Finish You ve successfully added usb printer on http 172 16 66 64 631 To see if the printer is working correctly or to see troubleshooting information for the printer print a test page 88 Chapter 3 System Administration 3 9 2 Uninterrupted Power Source From the External Devices menu choose the Uninterrupted Power Source item and the UPS Setting screen appears Make any changes you wish and press Apply to confirm changes UPS Settings UPS Monitoring Enable Disable Remote UPS Monitoring Enable Disable Remote UPS IP Manufacture iw Model lw oroduct has been tested for compatibility Battery Status N A Power N A Seconds between power failure and first notification Li Seconds between subsequent power failure notifications T Shutdown the system when the battery charge is less than C Apply See the following table for a detailed description of each item UPS Setting Remote UPS IP Input the IP address of the NAS t
88. r computer DNS Mode Select the DNS server is coming from DHCP server or manual input A total of 3 DNS servers can be input If the DNS setting is chosen from DHCP server then it will refer to WAN LAN1 port Se Network Configuration NIC port MAC address MAC address of the network interface Jumbo Frame Support Enable or disable Jumbo Frame Support of associate interface on your Thecus IP storage IPv4 IPv6 Click to enable IPv4 IPv6 for TCP IP The default is IPv4 enabled Mode It can choose a static IP or Dynamic IP Netmask Prefix Length Input netmask for IPv4 and Prefix length for IPv6 Gateway Gateway for associate NIC Default gateway It can be chosen from a drop down list of default gateway that s been used for the Thecus IP storage IP address of associate NIC interface Most faster Ethernet 10 100 Switches Routers do not support Jumbo Frame and will not be able to connect to your Thecus NAS after Jumbo Frame is turned on 3 4 Storage Management The Storage category displays the status of storage devices installed in the Thecus IP storage It in cludes storage configuration options such as RAID and disk settings 3 4 1 Disks Information From the Storage menu choose the Disk Information item and the Disk Information screen appears From here you can see various installed hard disks The disk slot position will appear if the mouse is moved over the installed disk Disk Information i a P
89. r manufacturer Displays the model of the USB printer Displays the status of the USB printer Remove document from Queue Click to remove all documents from printer queue If a corrupt print job is sent to a printer printing may suddenly fail If your print jobs seem to be locked up pressing the Remove All Documents button to clear the print queue may resolve the is SUe You can configure Thecus IP storage to act as a printer server That way all PCs connected to the net work can utilize the same printer Windows XP SP2 To set up the Printer Server in Windows XP SP2 follow the steps below 1 Connect the USB printer to one of the USB ports preferably the rear USB ports front USB ports can be used for external HDD enclosures Go to Start gt Printers and Faxes Click on File gt Add Printer The Add Printer Wizard appears on your screen Click Next Select the A network printer or a printer attached to another computer option SS A eS e Select Connect to a printer on the Internet or on a home or office network and enter http Thecus IP storage IP_ADDRESS 631 printers usb printer into the URL field 7 Your Windows system will ask you to install drivers for your printer Select the correct driver for your printer 8 Your Windows system will ask you if you want to set this printer as Default Printer Select Yes and all your print jobs will be submitted to this printer by default Clic
90. rators can choose from various forms of user access such as AFP Samba etc Note Users need to enable the User Access Log service to view these details ALL Provides all log information including system warning and error messages Log Level INFO Shows information about system messages WARN Shows only warning messages ERROR Shows only error messages Use the forward gt gt gt and backward lt lt lt buttons to browse through the log pages C Columns can also be added to display additional information about each event Date Time Event 2014 06 11 13 07 34 amp Sort Ascending 2014 06 11 13 01 25 z 2014 06 11 13 01 22 logged in from 172 16 64 149 2014 06 11 13 01 16 Columns tem My NAS is healthy now 2014 06 06 14 54 05 hy NAS The syster F Computer 2014 05 29 11 20 04 ity MAS SSH seni F User 2014 05 29 11 20 02 WNA hyna 1 2014 05 29 11 19 52 hiy MAS Healthy T aa tem hh MAS is healthy now 2014 05 28 13 18 08 My NAS The syster i j 2014 05 26 16 18 35 ity NAS SSH sen al ate 2014 05 26 16 18 33 hy Nas hy NAS iv Event 2014 05 26 16 18 27 ity MAS Healthy T File Size tem ity HAS is healthy now 2014 05 26 16 18 16 hi HAS Your system last shutdown is abnormal 2014 05 21 18 16 10 ii MAS User andy logoed in from 172 16 64 139 Hi d E raPage gt bE Qt Page Size so Display L 30 Records
91. riped array whose segments are RAID 1 arrays RAID 10 has the same fault tolerance as RAID level 1 RAID 10 has the same overhead for fault tolerance as mirroring alone High I O rates are achieved by striping RAID 1 segments Under certain circumstances RAID 10 array can sustain up to 2 simultaneous drive failures Excellent solution for applications that would have otherwise gone with RAID 1 but need an addi tional performance boost JBOD Although a concatenation of disks also called JBOD or Just a Bunch of Disks is not one of the num bered RAID levels it is a popular method for combining multiple physical disk drives into a single virtual one As the name implies disks are merely concatenated together end to beginning so they appear to be a single large disk As the data on JBOD is not protected one drive failure could result total data loss Stripe Size The length of the data segments being written across multiple hard disks Data is written in stripes across the multiple hard disks of a RAID Since multiple disks are accessed at the same time disk strip ing enhances performance The stripes can vary in size Disk Usage When all disks are of the same size and used in RAID Thecus IP storage disk usage percentage is listed below 100 n 1 2 n x100 100 n HDD number Appendix C Active Directory Basics e Overview With Windows 2000 Microsoft introduced Active Directory ADS which is a l
92. roperty Deshnaton of source of the system fles cannot be deleted otherwee it Wil cause the task to run improperly Lal 4 System wil automaticaly ist the dastination dractory name of the dupicata to avoid data coverage errors l Accent Previous Now you can see in the data guard task list that your created task is listed The task status will say Processing untill the Stop button is pressed Chapter 3 System Administration 77 Sg Addi 23Edt G Remove E Siart E Stop H Restore CS Log TI estore M45 Configuration Task Hame Source Path Source Folder Target Pat Last Run Time Back Type Status d Categorm local 3 mport Genenc USB intel Graph RADGO 2012 07 25 Import Finish copy RADEI Rian Genmenc_US8 2012 07 25 Copy Frish aback RAT HAS Publ RADGO Randy S012 07 25 Reatrene Pracesang 4 Schedule Backup click on Schedule Backup and this screen will 2 different choices can be selected from folder to folder folder to external device Let s use Folder to External device backup for our example From the NAS volume RAID in the Source pane select the folder NAS_ Public then in the target pane select the external USB disk folder N10850 Local Backup gt Schedule Backup gt RAID Folder to External Device x i Domis EANN Target 4 Return to Parent Folder LF Retum to Parent Folder ii NAS Public 5 LSVM2_02 a 1085S USECopy GB Modul
93. s appear and can be chosen from Aql A i Remote Backup Full Backup Automatically sync all data NOT including iSCSI folders in RAID to remote target Folders not Found on remote will be created to Master RAID Folders already exist on remote will be replaced Custom Backup Manually select Folders NOT including iSCSI folders to backup Remote Data backup Full Backup The Full backup will have all shares from source backup to destination It could also create shares automatically from destination if it is not existent This only applies if the target server is the same model as the source Custom Backup The Custom backup allows user to choose desired shares backup to destination Chapter 3 System Administration e Full Backup Click on full backup and the setup screen appear as below Fill in the remote target IP Destination and port need to be changed only if this port is already in use If encryption is required then enable it Please make sure the associated target server also has encryption enabled Carry on with inputting valid remote target server account name and password Remote Backup gt Full Backup Remote Target 172 16 64 131 Fort Encrypt with SSH off 9 On Account After the settings are complete please click on Connection Test The source unit will try to connect with the associated target system If a connection can be buil
94. se you may choose any version ever published by the Free Software Foundation 10 If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different write to the author to ask for permission For software which is copyrighted by the Free Software Foundation write to the Free Software Foundation we sometimes make ex ceptions for this Our decision will be guided by the two goals of preserving the free status of all de rivatives of our free software and of promoting the sharing and reuse of software generally NO WARRANTY 11 BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITH OUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU SHOULD THE PROGRAM PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 12 IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE THE PRO GRAM AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES
95. sed by its products It is highly recommended that users conduct neces sary back up practices Check the functions that are available on your particular Thecus NAS model at http www thecus com Safety Warnings For your safety please read and follow the following safety warnings Read this manual thoroughly before attempting to set up your Thecus IP storage Your Thecus IP storage is a complicated electronic device DO NOT attempt to re pair it under any circ umstances In the case of malfunction turn off the power im mediately and have it repaired at a qualified service center Contact your vendor for details DO NOT allow anything to rest on the power cord and DO NOT place the power cord in an area where it can be stepped on Carefully place connecting cables to avoid stepping or tripping on them Your Thecus IP storage can operate normally under temperatures between 5 C and 40 C with relative humidity of 20 85 Using Thecus IP storage under extreme environmental conditions could damage the unit Ensure that the Thecus IP storage is provided with the correct supply voltage AC 100V 240V 50 60 Hz 3A Plugging the Thecus IP storage to an incorrect power source could damage the unit Do NOT expose Thecus IP storage to dampness dust or corrosive liquids Do NOT place Thecus IP storage on any uneven surfaces DO NOT place Thecus IP storage in direct sunlight or expose it to other heat sourc es DO NO
96. ssssccccsscccccsscccccssccesssececsssseeossoe 6 2M AG ON E A A E A E E E E 7 BDZ CONOP E E A EON 7 EZ NS E B rE EOE EE E E 8 JA LOGOUT ere E E E A E tor seussiantosenacnsenee 8 3 2 5 Online Update Notification ou ccscscssecssesesesssessssssssssesesssesseeesesesesssesssseseeeseeeees 8 320 LANGUAGES Selec UON sena a R 9 3 3 System Management sssesscecssssssiccsssccseecccesescansetecsdensscecessonesdensxencess 9 I GE T o E AE E A E E EA ETA 9 3 3 2 System Service StatUS ssesseeseessesseosecsecssesossssosecsecsessseosscssesessscosscsscsecsecessoseesecseeess 10 3 3 3 Hardware Information ccssssssssssscsssssesscssssssssssssssscsssescsssssessssssescsssescsesssscseacees 10 IT LOO a 10 i Fo Foo ad i ean 0 o E A E A A E E E 12 3 3 6 Syslog Management se ssesssessessseeseesseeseesseeseesseessesseesesssesseossroseosseoseesseesersseesees 14 3 3 7 Date and Time Setting system tiMe ss sssesseessesssesseessesssesseosseoseosseoseesseesersseesees 14 338 Notifications COMMUN AUION wsssessssviscasusciavssiasscasssuvedapessusiacsasincsstaninctscusssoivesvinteiucniouss 15 Be Se DCMI OMA O saesdeccasehesvecicsetvnon REA E A 16 3 3 10 Administrator PASSWOMK cccccsecssscssssssesscsssssssesscscsssssssessessscsssssesssssssssseseeeasaees 17 BW OVNI WON E eaer E E E 17 3 312 Factory DSTA G aerieni rriei ir non iao Er ENERE AE ANE 18 3 3 13 Power ManagGeMe NL sscccsssscscssssscssscsscscsssscscsssesacscessssacssessaca
97. t up successfully then Connection passed will be prompted otherwise Failed will appear Remote Backup gt Full Backup Remote Target 172 16 64 131 Port Encrypt with SSH Off on Account Connection test passed Click Next to continute Click Next and more setting will appear 9 Remote Backup gt Full Backup Task Name fullbackup01 Backup Type Realtime Schedule Sync Type Sync Incremental Compress off On Backup NAS Configs Off on Resume Partial Files off on Update Data Directly off On Handle Sparse Files off on Keep ACL Settings off on Log Location _P2P_DownLoad_ Speed Limit o KB Sec set 0 to unlimit Timeout Limit 600 fec Enable Schedule Schedule is not enabled and this task will not run automaticaly Fill out all the necessary details and choose your parameters Add Rsync Backup Task Item Ss Description This is how this task will appear in the task list Backup Type Real time It will backup folders fles from source to target on the fly On the other hand any changes from the source will back up to the target right away Schedule The task will start only according to the schedule Sync Type Sync mode Makes your source match your target completely deleting and adding files on your target as they are deleted and added on your source Incremental Mode Makes your source match your
98. t you have created a task 3 GPAdd 3Edt Remove F Start T Stop restore H Log Task Hame Source Path Source Folder Target Path Last Run Tine Category local mport Genenc_US8 Intel Graphic RAD6O ee e SS i a a ee Se 2012 07 25 copy RAMGO R andy Gerent USB 2012 07 25 aa VE Restore NAS Configuration Backup Type Status Import Finish Copy Finish Realtime Backup click on Realtime Backup and this screen will appear 2 different options can be selected from folder to folder folder to external device Let s take Folder to Folder backup for example Select from the source pane the folder NAS _ Public then select its destination in the target panefolder R6 andy Chapter 3 System Administration 7 a Return to Parent Folder j NAS Public USbCopy afe _Modwe_Foker_ wd NAS Module LE Retum to Parent Folder gje Intal Graphi fe P N1850 a Si Reandy aje _NAS Picture_ aje andy_local i Tms mus J snapshot Next fill in the task name and related settings 76 rk ae Sync Type i Incremental gt Syme Backup Symbolic i of E On Lini Lag Location Intel_Graghics_V614105398_XP i Filter C Fie Ste i Fl ince Fle Type Document Pichinrs F Exchide Fle Type Dacurreenit Chapter 3 System Administration Realtime Backup Item Description Input the task name length limited to 4 12 characters Select
99. the Spare Disk RAID Management DEKS Total Data Used Canachy Capacky a T RAIDO J Healthiy l g50 5 1859 6 68 Dik No Capacity MB Model Status Used Spare 1 1 907 779 WDC WO2003F 75 0 OK Fl o 2 1 907 729 WDC WD2003F s 0 OK F O e Remove RAID Click to remove the RAID volume All user data created in the selected RAID volume will be deleted To remove a RAID volume follow the steps below 1 On the RAID List screen select the RAID volume by clicking on its radio button and click RAID Information to open the RAID Configuration screen 2 On the RAID Configuration screen click Remove RAID 3 A confirmation screen will appear you will have to click Yes to complete the Remove RAID operation 30 Chapter 3 System Administration RAID Configuration 7 RAID Hanagenient Edit Disk fo Capacity ME Mode OOF F725 WWOC WID2003FYYS5 0 2 OO7 72a WEC WwD200SFrvS 0 a RAID Levet J600 RAID ID RAIDO k Aiow Ow a r AZ V Master RAID Take effect after checked box Erirption j Pastor i Pubs ya 16 charag ers Canhrm Password Sipe Ste KB Fie Systeri Remove RAID destroys all data in the selected RAID volume The data will be unrecoverable e Expanding a RAID To expand a RAID 1 RAID 5 or RAID 6 volume follow the steps below 1 Replace one of the hard drives in the RAID volume and allow it to automa
100. tically rebuild 2 Once rebuilt you can continue to replace any remaining disks in the RAID array 3 When you are done replacing hard drives log on to Web Management Navigate to Storage gt RAID to open the RAID Configuration screen 4 Onthe RAID Information screen click Edit to open the RAID Configuration screen On the RAID Configuration screen click Expand VYN AW FYNI j r LNA RAD Ceonfisunition Unused 56 39 CE 60 3 5 File Sharing Privilege The Thecus IP storage has built in user database that allows administrators to manage user access using different group policies From the File Sharing Privilege menu you can create modify and de lete users and assign them to groups that you designate 3 5 1 Local User Configuration From the File Sharing Privilege category choose the User item and the Local User Configuration screen appears This screen allows you to Add Edit and Remove local users Add EpEdit Remove N User ID User Name 1000 aaa Local User Configuration Description Item Description S O Press the Add button to add a user to the list of local users Press the Edit button to modify a local user Press the Remove button to delete a selected user from the system Add Users 1 a e Click on the Add button on Local User Configuration screen and Local User Setting screen appears On the Local User Setting screen enter a name in the User Name box Enter
101. uide walks you through Bonjour zero configuration networking with a complete description of the protocols and technologies used to create Bonjour enabled applications and devices Bonjour Support Bonjour Service Enable C Disable 3 6 8 SSH The device is now SSH protocol supported It allows user to use SSH and have console to manipulate as needed The SSH default login user name is root with full privilege and password is admin s pass word The default admin password is admin so once the admin password has changed then SSH login need to change the password too A description for each item as following SSH tem Description y O SSH Service Enable or disable SSH service The port number is default 22 SFTP Enable or disable SFTP protocol under SSH service Click Apply to confirm the changes SSH Support SSH Service C Enable Disable Port Ja SFTP Enable Disable Description e 55H account is root and password is admin password e Port number must be 1024 and lt 65536 or Port 22 e When enter MAS SSH service does not delete or modify any file folder it maybe cause WAS to generate error e If there is garbage file name appear during winscp transfer please enable UTF 8 encoding option Winscp Advance options Environment l UTF 8 encoding tor filenames on 3 6 9 DDNS To set up a server on the Internet and enable the users to connect to it easily a fixed and easy to
102. up or user then appears in that column and has that level of access to the folder 3 Continue selecting groups and users and assigning them access levels using the column but tons 4 Toremove a group or user from an access level column press the Remove button in that column 5 When you are finished press Apply to confirm your ACL settings En To setup sub folders ACL click on symbol to extract sub folders list as screen shot shows below You may carry on with same steps as share level ACL setting Folder aau Shea remove Genres Op tact Foliar name RAID ID File System Public Description D arne aasa ext3 no neync Dud aaaa ext3 yes usbhdd LJusbcopy aasa ext3 no usbcopy gt J aahit aasa ext no naswebste Lo Tines musie aaaa ext3 yes TuNSS_musit la test aasa ext yee aij test aaaa ext ng b EQEcR E gt Neah A OC The ACL screen also allows you to search for a particular user To do this follow the steps below 1 Inthe blank enter the name of the user you would like to find 2 From the drop down select the group you would like to search for the user in 3 Click Search Local Groups cob Search Local Groups Local Users aaaa abcd 3 5 5 User Quota The Thecus IP storage support local or AD users with storage quota limitations in each RAID volume of the system To enable this function simply click Enable then apply User Quota O Enable Disable N
103. uration x Folder name Description Browseable Samba Configuration Description o Folder and sub folders Access Control List ACL On the Folder screen press the ACL button and the ACL setting screen appears This screen allows you to configure access to the specific folder and sub folders for users and groups Select a user or a group from the left hand column and then choose Deny Read Only or Writable to configure their access level Press the Apply button to confirm your settings ACL setting x 9 This process maybe need sometimes to sync lt s Are you want sync account Fe No ACL setting Xx v Recursive Deny Read Only Writable Local Groups v ap Search Name Name Name Name users andy Local Groups Local Users AD Groups AD Users Apply ACL setting Item Description Denies access to users or groups who are displayed in this column Read Onl Provides Read Only access to users or groups who are displayed in this column Writable Provides Write access to users or groups who are displayed in this column Enable to inherit the access right for all its sub folders To configure folder access follow the steps below 1 On the ACL screen all network groups and users are listed in the left hand column Select a group or user from this list 2 With the group or user selected press one of the buttons from the three access level col umns at the top The gro
104. ust be unique e Create a RAID On the RAID Information screen press the Create button to go to the RAID Volume Creation screen In addition to RAID disk information and status this screen lets you make RAID configuration set tings Using Create RAID you can select stripe size choose which disks are RAID disks or the Spare Disk RAID Configurations Item Description S O Number assigned to the installed hard disks Capacity MB Capacity of the installed hard disks Model number of the installed hard disks Status of the installed hard disks Stripe Size This sets the stripe size to maximize performance of sequential files in a storage volume Keep the 64K setting unless you require a special file storage layout in the storage volume A larger stripe size is better for large files To create a RAID volume follow the steps below 1 Onthe RAID Information screen clicks create RAID Volume Creation x Disks List Disk No Capacity MB Mode Stats Used Spare The mts of system hand dak 1 1 907 720 WOE WO2003 OK F F si 2 L89077 25 WEC WO2003 OK Desorption a 2 On the RAID Configuration screen set the RAID storage space as JBOD RAID 0 RAID 1 RAID 5 RAID 6 or RAID 10 depends on model see Appendix B RAID Basics for a detailed descrip tion of each RAID Volume Creation z Disks List i Dek Mg Capacity MB Model Stats Used Spare The Mets OF system harg lex 1 1 907 728 WDC WO2003 OK a al
105. vice Enable Disable Clear port forwards at startup Enable Disable Apply Settings Cancel Changes After the router has enabled UPnP Service then you will have information come from associated router to UPnP port management as shown in the screen shot below Information Friendly Name UPnP router Manufacturer URL http tomatousb org Model number 1 Model URL http tomatousb org Model description UPnP router UDN uuid 3c9b889b 6da0 4687 a0d7 d12062ac9570 Connection rules S Refresh Add Rule amp Reset Port Protocol Description status None Local Setting 41728 UDP 41728 TCP 4358 UDP 4358 TCP 47590 UDP 47590 TCP Local Setting 1080 1080 TCP For WebDisk Fail And click Add Rule to add more port mapping from Internet to access desired services or press Refresh to get most updated list Connection rules Start port Protocol ey Description TCP DP U i Toun A description for each item as following UPnP Port Management Item Description Specific port number starts with Specific port number ended Choose the protocol for port forwarding needed Specific the port services if applicable Click Apply to confirm the changes Click Cancel to abort the changes Some of the routers do not allow the input of port number below 1024 So it may have resulted setting fails 3 6 11 WebDAV The WebDAV is an extended protocol
106. with an uploaded SSL certificate file default settings will be used automatically 2 The SSL certificate file needs to reload after the master RAID partition has been changed A description of each item follows Web Service Description tem o O HTTP WebDisk Support Enable or disable WebDisk support Enter the port number if this option is enabled The port number is default 80 HTTPs Secure WebDisk Support Enable or disable secure WebDisk support Enter the port if this option is enabled Certificate Type Select User if there is available Certification ID ex Apply from VeriSign Or using system default by select System Certificate File Upload Certificate File if choose Certificate type User Certificate Key File CA Certificate File Restore All SSL Certificate Files Opee 3 6 6 UPnP Service This device supports UPnP Media server which allows users to play media files with UPnP client ex DMA devices Enable or disable Universal Plug and Play protocol UPnP helps to find the IP address of Thecus IP storage UPnP Support UPnP Service DO Enable Disable Description 3 6 7 Bonjour Setting Bonjour is Apple Inc s trade name for its implementation of Zeroconf a service discovery protocol Bonjour locates devices such as printers as well as other computers and the services that those de vices offer on a local network using multicast Domain Name System service records This definitive g
107. xternal DOV ICS scsi ve vescsceeccesececeucecessvacesscceeesesventasseeuseucssvecvevexeccevocs 84 e M E E EE S A A A EAEN EAE EN O A A A 84 3 9 2 Uninterrupted Power SOULCE csscssssssssssssssssssssesssesssesesescsesessseseseseseseseseseseeesess 89 Appendix A Customer SUpport ssscccscccccccscccscccsceoscesccesceescessees JO Appendix B RAID B SiCS sssssssssscisssssossvvusosusssssossissosrussssusesnsssssss D Appendix C Active Directory BasiCs cccccccssscscssssccssssceeees ID Appendix D Licensing INformatiOn ccccssssccsssscccssssccssess J4 Chapter 1 Introduction 1 1 Overview Thank you for choosing the Thecus IP Storage Server The Thecus IP storage is an easy to use stor age server that allows a dedicated approach to storing and distributing data on a network Gigabit Ethernet ports enhance network efficiency allowing Thecus IP storage to take over file management functions increase application and data sharing and provide faster data response The Thecus IP storage offers data mobility with a disk roaming feature that lets you swap working hard drives for use in other Thecus IP storage securing the continuity of data in the event of hardware failure The Thecus IP storage allows data consolidation and sharing between Windows SMB CIFS and Apple OS X environments The Thecus IP storage s user friendly GUI supports multiple Languages 1 2 Package Contents e N2310 The Thecus IP storage should co
108. y and give any other recipients of the Program a copy of this License along with the Program You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee 2 You may modify your copy or copies of the Program or any portion of it thus forming a work based on the Program and copy and distribute such modifications or work under the terms of Sec tion 1 above provided that you also meet all of these conditions a You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change b You must cause any work that you distribute or publish that in whole or in part contains or is derived from the Program or any part thereof to be licensed as a whole at no charge to all third par ties under the terms of this License C If the modifed program normally reads commands interactively when run you must cause it when started running for such interactive use in the most ordinary way to print or display an an nouncement including an appropriate copyright notice and a notice that there is no warranty or else saying that you provide a warranty and that users may redistribute the program under these conditions and telling the user how to view a copy of this License Exception if the Program itself is interactive but does not normally print such an announcement your work based on the Program is not required to pri
109. ystem check Check the desired RAID volumes and click Next to proceed with the file system check Click Reboot to reboot without running the check RAID Level ID File System Disks Status Filesystem Status Data Capacity Last Check Time e 1 Healthy A JBOD RAID xt4 Normal 2 8 GB 2728 5 GB RAID Level ID File System Disks Data Capacity Last Check Time JBOD RAID ext4 1 Normal 28GB 2728 5 GB Status l Net _Reboot _ Once you click Next you will see the following screen Click Start to begin the file system check Click Reboot to reboot the system When the file system check is running the system will show 20 lines of information until it is com plete Once complete the results will be shown at the bottom Chapter 3 System Administration 19 Status Latest 20 lines Information Result 2009 6 8 14 5 33 4 8 2009 6 8 14 5 33 Pass 5 2009 6 8 14 5 33 5 0 16 2009 6 8 14 5 33 5 1 16 200976 8 14 5 33 5 2 16 2009 6 8 14 5 33 5 3 16 200976 8 14 5 33 5 4 16 2009 6 8 14 5 33 5 5 16 2099 6 8 14 5 33 5 16 2009 6 8 14 5 33 5 7 16 2009 6 6 14 5 33 5 amp 16 2009 6 8 14 5 33 5 9 16 2009 76 68 14 35 33 5 10 16 2009 6 8 14 5 33 5 11 16 2009 6 8 14 5 33 5 12 16 2009 67 8 14 5 33 5 13 16 2009 6 8 14 5 33 5 14 16 2009 6 8 14 5 33 5 15 16 2099 6 8 14 5 33 5 16 16 2009 6 8 14 5 33 dev vg0 syslv 33 262144 contiguous 16763 2

Download Pdf Manuals

Related Search

Related Contents

  Manual Importação da Conquest    Cavalry CAUH3701T0 external hard drive  PDF - Tornado Industries  vänEE 100H and 200H Inst. Manual  Printemps 2008 - Banque du Canada  Controlador de Etapas NXT 48ES y 51ES  Grandstream Networks GXP2124 4lines LCD Wired handset Black, Grey IP phone  USER`S MANUAL MODEL: LVMCTRL-  

Copyright © All rights reserved. Failed to retrieve file