User Manual - Visual Tools
Contents
1. Windows Internet Explorer Enter here the IP address or the DNS name of the unit Fig 2 Connecting to a PeCo1 unit bhtp v s x x lel P gina en blanco v Cf Herramientas User Manual 9 4 3 Login When connecting to PeCo1 you will see the login screen where it appears the unit data You can select the language for the application interface before you press the Enter button When you press the Enter button it appears a new window to introduce the user and password for the unit configuration The user must always be administrator and the password the one defined in the unit by default is administrator The server 192 158 6 200 at peco requires a username and password Note that to enter you need to login with the user administrator Warning This Server is requesting that vor username and password be sent in an insecure manner basic authentication Without a secure connection Password Remember my password Download the graphic visualization tools 7 Fondo Europeo de Desarrollo La 5 1 ur ds Regional Reflejo de Europa UNION EUROPEA Product partially financed by the IDEPA and European Regional Development Fund Fig Access screen to the unit If you forget the password you can reset the default values by clicking on the factory settings button Main menu and configuration op2. name address city etc and modify the different user passwords Network In this screen you could see the basic data for the network configuration There have been introduced in the initial configuration from the local interface or from the VSFinder application the DNS 5 details are only necessary if the unit has a dynamic IP address Please check if the data is correct by clicking on the Check button placed in the lower side of the screen the system verifies the state of the communications gateway DNS servers HTTP and RTSP ports and provide a diagnosis of the network communications User Manual 11 Advanced network configuration HTTP port Configuration this option is useful when several units in the same local network are connected to the Internet using the same router and sharing the same global IP number for further details please refer to the technical note Internet Connection and bandwidth consumption Is possible to fix the connection between the following values http port 80 2048 Dynamic IP management it must be activated when the unit is connected to the Internet without having a fixed IP address otherwise it will not be possible to connect to it If the unit works with a dynamic IP it is necessary to specify at least a DNS server For more information please refer to the technical notes on the web NTP server The application automatic and periodically synchronizes itself with an external time synchronizati
3. 168 6 205 DAILY TOTAL Fig 11 Daily estimations An interval with an empty count can have two different meanings e Nobody crossed the line the value 0 is displayed he sensor was disabled the value 15 displayed With the arrows placed on the left and right it is possible to show the data from previous or later days This screen has as sole aim to provide the verification of the people counter operation The entire feature for the operating accounts is on the PeCo Graph application User Manual 17 4 10 Logout To end connection with the unit press the button placed on the upper bar The session and the explorer window will be finished 4 11 PeCo1 Factory settings The manufacturer delivers all the PeCo1 units with a default configuration These values can be restored at any time in three ways 1 Click on the factory settings button while the unit is starting Keep it pressed it until it appears the green light in the network card RJ45 connector around 2 minutes 2 When the unit on press the factory settings button during 10 seconds until the external led remain fixed 3 From the unit web interface in the configuration tab when you select the advanced configuration it appears the factory settings button These factory settings do not change the network unit data to avoid lose the unit connection The data included in the factory settings are PeCo1 identification the default name for all
4. To define the date and time of the remote unit and the zone where it is placed Note Do not forget to click on Save once you are done with the changes to update them in the unit You will see a confirmation message when they are saved 4 6 People counter configuration The people counter configuration screen allows editing and configuring the people counter LOGS CONFIGURATION LOGOUT General Data N Timetable People Counter m L5 im TARZA Person M 3 1 nNENENEM Count line Non occlusion area Invalid area for count line COUNT LINE Vie AN tenes 41 Yh dL LN 35 NENNEN AY A dele gt n PERSON WIDTH INPUT DIRECTION Downwards Fig 8 People counter configuration It is advisable to take a snapshot with a person placed under the people counter before starting the counter configuration Thus you will have the necessary reference to configure the people counter To take this snapshot press the refresh button The image will be kept in the unit and it will change only when other snapshot is taken The configuration includes the following data Name and Camera Because this unit has only one counter these data is fixed and cannot be edited Enabled the sensor can be configured to work always on working hours or on non working hours In out definition the system differentiates between two passing directions one considered in and other out Th
5. gateway address and the network mask values that should be provided by the network administrator To modify the original connection data is necessary to enter the Administrator user password of the PeCo1 unit In the last column are show like information the http and video ports From that moment on you will be able to access de unit through its IP address whether local or remotely through ADSL This configuration with the VSFinder only has to be done once To access the unit through ADSL you must configure the NAT table of the router to define a correspondence between the router global IP and the unit local IP For more information about this subject please check the technical note about Internet connection User Manual 8 4 Counter configuration and test The basic scenario presupposes one or more 1 units connected to the same communication network either a corporate network or Internet and a flow management workstation with the PeCo Graph software that contact via TCP IP To configure the unit it is necessary to use Internet Explorer from a PC that can be the same as the one with PeCo Graph or any PC that fulfils the requirements 4 1 Configuration workstation requirements The unit configuration and diagnosis should be done from a Workstation connected to the network that accesses the unit through the Internet Explorer The workstation to configure the unit must fulfil the following requirements e PC with Microsoft W
6. the units is Peco and the passwords for the peco user and administrator user are pecouser and administrator respectively bear in mind that the system is case sensitive Working hours non working hours programming control the default schedule is from 0 00 to 24 00 all days Counter configuration The user configuration is lost IP address The default IP address is 192 168 1 100 the subnet mask 255 255 255 0 and the gateway 192 168 1 1 The values configured by the user are observed if there have been introduced via web interface Ports the default value for the HTTP port is 80 The values configured by the user are observed if there have been introduced via web interface The unit has by default the GMT 01 00 time with daylight savings changed according to the European standard User Manual 18 Appendix 1 Use of the external camera and volumetric signal 1 offers the possibility to use a camera or an external monitor already installed and a volumetric signal associated to the counter To configure these options you must open the unit case In the case of the external video signal if you want to use an external monitor in parallel to the internal unit camera you must connect the video cable to the connector label as video in If you want to use an external camera already installed but disable the internal camera you must connect the cable to the video in connector and also disconnect th
7. 300 0002 012345 C092 0001 012345 0002 0002 012345 C142 0003 012345 D102 0004 012345 C143 0005 000101 D300 0001 000101 D300 0002 000101 D300 0003 000101 D300 0004 000101 D300 0005 000101 D300 0006 000101 D300 0007 vSFinder application version 1 0 4 00 01 29 08 9 4 00 01 29 09 01 7B 00 01 29 08 E9 E0 00 01 29 08 7 6 00 01 29 D7 92 8B 00 01 29 09 81 48 00 01 29 0E 91 44 00 01 29 6F 0B E3 00 01 29 09 FB D9 00 01 29 09 81 4B 00 01 29 6 11 6 00 01 29 09 99 6D 00 01 29 F5 83 El 00 01 29 6F 10 8B 00 01 29 16 B1 48 00 40 63 DD 62 a9 00 01 29 06 9E C0 00 40 63 DD 81 3C 00 01 29 12 5C FC 00 01 29 2 1 53 00 01 29 09 81 4 00 01 29 09 81 49 00 01 29 04 44 9B 00 01 29 6 00 01 29 04 88 81 00 01 29 09 B4 35 00 01 29 0E 85 21 00 01 29 F5 F7 4 00 01 29 12 BC 54 00 01 29 13 18 42 00 01 29 13 18 00 01 29 12 BB 19 D0 01 29 12 5C FD 00 01 29 13712723 00 01 29 09 81 45 10 0 0 34 10 0 0 35 10 0 0 66 10 0 0 67 10 0 0 98 192 168 1 106 8554 192 192 VS unit network configuration ID 00010103000001 00 01 29 09 81 48 IP 1921681106 DATE EN 192 169 1 1 Mask 255 255 0 0 Submit remote reset 192 168 5 32 192 168 5 33 192 168 5 34 1922168 5 35 192 168 5 41 192 168 5 42 192 168 5 43 192 168 5 44 192 168 5 45 192 168 5 46 192 168 5 47 Fig 1 VSFinder Then you will see a screen to enter the IP address the
8. NERAL DATA CONFIGURATION en ed nee a ae 11 4 5 LIME TABLE CONFIGURATION Beeren 12 4 6 PEOPLE COUNTER CONFIGURATIONS keller ei 13 dy ADVANCE Dissen te ent a ee a ea D ale 15 4 8 COUNTER a en ne ds 16 17 WOT gt 18 411 PECOT FACTORY SETTINGS reellen a oem indie 18 APPENDIX 1 TECHNICAL SPECIFICATIONS 19 APPENDIX 2 TECHNICAL SPECIFICATIONS 20 User Manual 1 FIXING AND UNIT CONNECTION Ceiling mounting groove Factory settings button Count and power supply led Power supply connection esd TCP IP connection DEFAULT ACCESS PASSWORD Administrator user Web and PecoGraph application access User administrator Password administrator Peco user only from PeCoGraph application User peco Password pecouser User Manual 2 Camera lens Connection of an external camera or a volumetric User Manual 3 NETWORK INSTALLATION Quick installation guide D PeCo1 unit Use the VSFinder contained in the CD to configure the internal IP address the gateway and the subnet mask Consult the network administrator 2 Open the port 80 and map the internal IP address of the unit to the external one of the router Operator PC To conne
9. PECO1 User Manual ENGLISH INDEX FIXING AND UNIT CONNECTION 2 DEFAULT ACCESS PASSWORD nn eau 2 NETWORK INSTALLATION ee 4 1 RECOMMENDATIONS AND SECURITY WARNINGS 5 UNES er Eau eme RR T 5 1 2 ELECTROMAGNETIC COMPATIBILITY EMC ii nennen nnne nnns nnns nnne 5 1 3 ice E mee 5 1 2 ADDITIONAEINEORMA TION ne ne ee 5 2 INTRODUCTION re 6 21 DESCRIPTION ee dde ee 6 3 INSTALLATION AND SET UP He nee ELI 7 1 UNIT PACKAGE CONTENTS 4 20 ee een 7 3 2 UNIT INSTALLATION ee menge ee NA is 7 3 3 REMOTE START OF THE UNIT FROM THE LOCAL NETWORK LAN 7 4 COUNTER CONFIGURATION AND TEST 2 22020202000000000000000nnnnnnn00nnnnnnnnnnnnnnnnnnnnnnnnn nn nnnnnnnnnnnnnnnnnn 9 4 1 CONFIGURATION WORKSTATION REQUIREMENTS eeeeeensssnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnsnsnnnnnnnnnnnnnnnnnen 9 4 2 CONNECTION PROCESS ee ee 9 MM Noc EAE nec ans seasons Cannes EEE REIFEN to ane ra niet 10 44 GE
10. cludes the test date and time and the in out estimated accounts with the following format aammdd hhmm inXXX outYYY nnnnnnn m4v being the date hhmm the time XXX the in accounts and YYY the out accounts You can playback the file by clicking in the link or downloading the file with the Windows dropdown menu in the right mouse button and select the Save as option Depending on the viewer you are using or the video codec that your PC has installed you will or will not be able to visualise it In case you cannot watch the video click on the MPlayer button to obtain the specific viewer for Visual Tools units MPlayerGUI MPlayerGUI is a viewer specifically adapted to the particular types of video of the units manufactured by Visual Tools Is able to reproduce the m4v format mpeg 4 video that is generated by the PeCo1 counter test and the vsv format owner RAW video from our DVRs VS and VX You can download it form the web http www visual tools com soporte y servicios soporte tecnico descargas in the PeCo unit section 4 9 Logs The logs screen allows the user to access the people counter stored data The data is stored up to six months The counts are stored hourly and distinguish between passing direction in out 21 Nov 2012 b ET IN COUNTS PeCo 01 2 04 05 o6 07 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Ej 21 Nov 2012 09 00 pecot 192
11. ct to the unit from the operator PC use the router external IP address or the name identity dnsvideo net identity being the serial number of the unit SN followed by 14 digits Accessing the unit through its identity is needed when using dynamic IP address and it requires enabling the dynamic IP service advanced configuration For further information please consult the technical note about Internet connection PeCo1 Local IP 192 168 1 100 Gateway 192 168 1 1 Mask 255 255 255 0 PC Explorer PeCoGraph Hemote node Connection PeCo1 2 2 2 1 identity dnsvideo net Router Local IP 192 168 1 1 Table NAT External IP 2 2 2 1 Local IP External IP 192 168 1 100 80 2 2 2 1 80 Internet connection example User Manual 4 1 Recommendations and Security warnings 1 1 Security warnings N The electric power socket must be located close to the unit and must be easily reachable N Do not use the unit in an extreme environment with high temperatures or humidity Use the unit at temperatures within 5 C 40 C 41 F 104 F and humidity below 90 N Handle the unit with care Do not strike it or shake it as this may damage it A Protect the unit from water or dust Do not use it in wet environments Prevent the unit from droppings and spattering and do not locate recipients containing liquids like glasses Do take immediate action if the unit becomes wet Turn the power off and refer servicing to the qualifie
12. d service personnel 1 2 Electromagnetic compatibility EMC The CE mark is affixed to the enclosed product to confirm compliance with the following European Community Directives for a Class B digital device EN55022 1994 related to radiated emission and EN50082 1 1997 related to residential commercial and light industry immunity 1 3 Responsibilities This manual has been prepared with the maximum care However if you detect any inaccuracies or omissions please inform us at the address that can be found in the warranty of this manual Visual Tools cannot be held responsible for any technical or typographical errors and due we are improving our products constantly reserves the right to make changes to the product and or manuals without prior notice Visual Tools makes no warranty of any kind with regard to the material contained within this document including but not limited to the implied warranties of merchantability and fitness for a particular purpose Visual Tools shall not be liable or responsible for incidental or consequential damages in connection with furnishing performance or use of this material 1 4 Additional information For further information about PeCo please check the on line technical notes located on the Visual Tools web site http www visual tools com User Manual 5 2 introduction 2 1 Description The PeCo1 is IP people counter and client flow estimator for all types of premises that are open to
13. e camera signal on the board as it is shown in the image Connector from the internal camera to the board Video In connector To connect the volumetric external signal you must use the connector that appears in the bottom image 12 User Manual 19 2 Technical Specifications TECHNICAL FEATURES MODEL COMMUNICATION VIDEO CAMARA PEOPLE COUNTER CONFIGURATION POWER SUPPLY PHISICAL DATA CERTIFICATES DATA OPERATION INTERNET EXPLORER SOFTWARE PeCo Graph HARDWARE amp SOFTWARE REQUIREMENTS User Manual 20 PeCo1 IP People counter Web server over TCP IP with internal adapter and RJ45 connector Automatic management for Internet connections with dynamic IP address Integrated video camera Only for counting purpose 1 3 B amp W CCD and 2 8mm pinhole lens Field of vision of approximately 1 5m width per metre of distance with the lens An external camera can also be used 1 people counter based on video image analysis Simultaneous counting of multiple people entering exiting Separated in and out counts Reliability of 95 of the daily average WEB interface for configuration and diagnosis Remote access from PC or laptop with MS Internet Explorer Access with administrator level password protected Remote software updating Voltage 12Vdc Peak electric current 500mA a 12Vdc Universal external adapter UL CSA FCC amp CE marked Hardware
14. e direction can be changed clicking on the Toggle button User Manual 13 Reference line horizontal line as the image is viewed on the screen that the system uses to count each passing person The length of the reference line has to be calculated not at ground level but at shoulders level Average person width It is advisable to define it with a screenshot containing a person on the reference line to have a better idea of the size gt of a person as seen by the camera Person width as In the right low part of the screen are displayed the counter data this Seen in the image summarized definition makes easy the creation of anew counter with the same configuration At the bottom of the main viewer there are four buttons Test Refresh Undo and save Test gives access to a new test screen to check the performance of the sensor with live video images To test a configuration first it has to be saved to avoid exiting this screen without saving the current configuration by clicking on the Save button Counter configuration process On the central area the main viewer shows a snapshot of the selected camera tip take the snapshot with a person on it this will make agb 205 easier to determine the width Small things are not Two people together Two people separated considered as creating one shape counted as two of an average person people counted as two because of because th
15. ey create the shape width two shapes As the reference line is defined clicking and dragging the mouse on the image the application superimposes the image of the line and the image of a person with a proportional size to the width person defined Changing the value of the person width modifies the size of the image In and Out senses are also indicated on the image The rectangle defined by the green line non occlusion area containing the person image and the reference line has to be free of obstacles in the camera vision field otherwise m the sensor performance might be affected N An obstacle in the camera vision field might S cause the loss of part of the image as in the drawing on the left The area visible is reduced from AC to BC because of the bulk on the ceiling near the camera The red grid drawn on the image limits the area where the reference line can be positioned The bigger is the width of the person the bigger is the area excluded by this grid User Manual 14 4 7 Advanced Within the configuration window is the advanced settings option where you can enable the use of an external volumetric and adjust the camera sensibility The signal of the external volumetric is associated to a counter so that it is only active when the volumetric is active To access to this window press the ADVANCED button placed in the bottom part of the configuration screen If you make changes in the config
16. indows XP and Service Pack 2 Windows Vista or Windows 7 SVGA graphic card 1 024x768 pixels true colour e Colour monitor e Ethernet 10 100 base T card e Mouse and keyboard e Microsoft Internet Explorer 6 0 or higher 4 2 Connection process If the unit is on the same local network as you are you will need to type in your Internet Explorer the local IP address of the PeCo1 unit If on the other hand you want to connect to the unit trough the Internet external connection you will need to type the public IP of the unit if this is a fixed IP address or connect to identity dnsvideo net if the unit has a dynamic IP address The identity number that you will find on a sticker at the bottom of the unit is made up of the letters SN plus the internal serial number of the unit As an example if we have a PeCo1 unit with identity SN03060963151234 the connection address will be SN03060963151234 dnsvideo net To obtain more information about how the dynamic IP works please check the technical note Internet Connection and bandwidth consumption available in www visual tools com Note If you need to know the identity of a unit and do not have it at hand you can find it out running the VSFinder application from a PC within the same local network as the PeCo1 and that will give you the internal serial number of the unit To obtain the identity you just need to add the letters SN in from of the internal S N of the unit P gina en blanco
17. on server The server address by default is pool ntp org This address can be changed when a local NTP server is used Other options The user can update the unit with the latest software versions by using the Insert new upgrade option which is available both local and in remote To obtain more information of the process to update a unit refer to the technical note Remote unit upgrade The screen also shows two more buttons the FACTORY SET button that restores the factory settings see the corresponding chapter and the RESTART button that restarts the unit 4 5 Timetable configuration In this screen there can be consulted and modified the conditions for the working and non working hours of the site where the unit is installed Current status Working time 25 05 2009 14 46 0200 Timetable definition from hh mm h mm We Shift 1 DO 24 v Write from 00 00 to 24 00 or from 00 00 to 00 00 to record 24 hours day Shift 2 d Shift 3 d d Shift 4 95 1 LI EI E RI E shift 5 Time Timezone a Fig 7 Timetable configuration screen User Manual 12 The basic options of the timetable configuration are the following Timetable definition Up to five configurable time shifts Monday to Sunday are allowed Working hours includes everything contained in these shifts the rest is considered Non working hours Time and Zone
18. ply and power cable RJ45 cable for TCP IP communication e 1 User manual this document e CD that contains the VSFinder application necessary to configure the network information 3 2 Unit installation Please follow the steps set below It is recommended to have at sight the page diagrams 1 Unpack the box contents Please ensure that the box contains all the items enumerated in the previous paragraph Tip write down the serial number it will be useful to identify the unit when using the configuration software VSFinder 2 Put the unit onto its final installation location Please bear in mind that it must be placed in the ceiling on the vertical line of the transit area and aligned in such a way that people direction of step match up with the unit longitudinal axis the unit has a sticker in its hidden side showing how it should be aligned 3 ATTENTION At heights above 5m the Pecoi may not count properly because the average person width is insufficient In cases like that it is advisable to use an external variable optics camera to make a good image adjustment 4 Connect the TCP IP communications cable provided with the unit in the RJ45 socket Ethernet network adapter 10 100Base T 5 Verify that the voltage of the unit power supply matches the voltage specifications of your power source Connect the power supply to the unit and then plug the power cable into the power source Use the provided power cable 6 The
19. that covers the power supply and network cables Weight 800 g Width x Height x Depth 237 mm x 110 mm x 27 mm All Peco range units have a Web based interface that permits remote access via MS Internet Explorer for their configuration diagnosis and upgrading PeCol is complemented by PeCo Graph Windows software included with the units that permits the manual or automatic download and the graphical visualisation of the counting data from one or multiple PeCo range units The PeCo Graph application is free and it s available at www visual tools com PC with SVGA graphical card 1024x768 minimal resolution and true colour 512 MB of RAM memory 15MB of HDD free space for the application files and 100MB for the data base and Ethernet network card TCP IP Requires Windows XP Windows Vista or Windows 7 with previous installation of the Microsoft NET Framework v3 5 available at Microsoft site User Manual 21 Fondo Europeo de Desarrollo S urias L Regional Reflejo de Europa e UNION EUROPEA PECO1 ENGLISH User Manual DOCVSPECO1UMOOEN 121212v240
20. the public The unit analyzes the images obtained from its internal camera and gets counting statistical data that its transmitted via TCP IP Internet LAN WAN to a PC where the information is analyzed Its main features are SCALABLE AND MODULAR It permits the grouping of as many units as necessary and in successive installations Thanks to the flexibility of its architecture it adapts to the client s needs HIGH PERCENTAGE OF ACCURANCY It measures the visitor flow in a determined area with a reliability of 95 being able to differentiate between the direction of traffic in out and the passage of several people simultaneously CONFIGURATION AND ACCESS VIA MS INTERNET EXPLORER UPnP device From any PC or laptop the user can easily access the Web interface of the unit to carry out its configuration and diagnosis OPERATION FROM ANY PC For the functional and commercial use of the counting data the PeCo Graph software is supplied It permits manual or programmed data downloads from different units simultaneously their analysis and export USE OF EXTERNAL DEVICES You have the possibility of using an external camera already installed and a volumetric signal associated to the counter 95 reliability in measurements of more than 100 records User Manual 6 3 Installation and set up 3 1 Unit package contents Open the box and check that the following items are included in it e 1 unit Power sup
21. tions Once the connection is established the application interface will appear in the Explorer window The upper bar common to all the screens contains the main available options logs configuration and logout CONFIGURATION LOGOUT Fig 4 1 main bar Press the Configuration tab on the main options bar and a second level bar will be displayed with the following options General Data e Timetable e People Counter To access any of these screens click on the appropriate button User Manual 10 Fig 5 Configuration button bar Note Do not forget to click on Save once you are done with the changes to update them in the unit You will see a confirmation message when they are saved 4 4 General Data configuration The General data configuration screen is the default screen when you access the Configuration menu General Coneral Tata A Timetable 7 People Counter Tepe Come Unit yy unt name ness Poeme 0000 MEE Network 0000000000000 IP address 192 168 6 200 Mask 255 255 0 0 80 58 32 97 Gateway Router Proxy 192 168 1 61 Passwords PeCo password Confirm Password Administrator password o Confirm Password o Advanced network config HTTP Port NTP server Activate Dynamic IP Fig 6 Unit general data configuration screen On this section the user can see and modify the unit basic information
22. unit starts working automatically when it is plugged into the power supply or when power is recovered after a supply loss The unit has an informative led to inform about the state of the machine on off 3 3 Remote start of the unit from the local network LAN Although the user can be connected to the unit via TCP IP whether by using the local network or remotely through ADSL THE INITIAL UNIT CONFIGURATION MUST BE ALWAYS PERFORMED BY USING THE SAME LOCAL NETWORK so it will be necessarily to connect the unit and the computer to the same sub network or to use a crossover cable Once the physical connections are established start the VSFinder program contained in the installation CD This program identifies all the VS VX and PeCo units connected to the network If several units appear in the list of units found you can identify the one you are about to configure through its serial number which can be found in a label stuck to the unit and is also in the first column id model Select it by clicking on the corresponding line User Manual 7 010105 8102 0002 010105 092 0003 010105 C092 0004 010105 C092 0005 010105 8102 0000 000101 D300 0001 080324 D034 9335 770820 C1A2 1233 770820 D310 1234 031231 0300 0001 031231 C262 0001 190308 D300 1234 150570 C262 0001 000101 ClA2 1234 DOD101 ClA2 1235 071107 0001 0000 061011 C262 8083 000101 0001 1234 190308 0300 1234 050221 C262 9383 000101 0300 1020 000101 0300 0001 000101 D
23. uration please don t forget the SAVE button When you select this option the counter is associated with a digital input Turning off this option the count is independent ofthe digital input Sensitivity adjustment When low contrast images are used for counfing it may be improved by increasing the sensitivity On the other hand on images with shadows or noisy images the counting may be improved by decreasing the sensitivity For detailed information about the physical connection of the external volumetric signal refer to Appendix 1 User Manual 15 4 8 Counter test You can access the test from the counter configuration screen through the Test button If you have changed the counter configuration it has to be saved before accessing to the counter test Once in the Test screen you can start the test by clicking on the Start button From this moment on the sensor will count all the people that cross the reference line until you click on the Stop button Fig 9 Counter test running In the screen it will be showed the time left dynamically and the accumulated accounts since the start of the test The test maximum length is 300s If you click on the Stop button or the maximum time goes by the test ends The screen warns that the test is stopped and shows a link to download the video sequence of the last test performed to allow verification Fig 10 Counter test stopped User Manual 16 The file name in
Download Pdf Manuals
Related Search