setting up a user - Smart R Distribution
Contents
1. holiday access holiday access Holiday List To 00 00 To 00 00 Click here to WN UN a WU oe NA ae ee a oo manage holiday list mon tue wed thu fri sat sun mon tue wed thu fri sat sun Please see Manage No Timezone Active Now Time Periods Holiday List for details x Timeone No nevera 2 Timezone 2 No Never Active 3 Timezone 3 No Never Active 4 Timezone 4 No Never Active 5 Timezone 5 No Never Active 18 Manage Time Period Time Period start Please enter start time for time period in 24 hour format e g 15 00 Time Period End Please enter end time for time period in 24 hour format e g 18 00 Note End time cannot be earlier than start time Time Period 1 holiday access mon tue weg this fri Days in week Va Please select days above times are effective for Holiday Access Selecting this box will allow access during holiday periods If this box is unselected user will not be allowed access on a holiday Please see Manage Holiday list for details 19 Manage Holiday List Holiday List Dates in this list are marked as holidays in the system Time period will not function as normal on these dates Access will be denied to user Save Holiday List Please always save Holiday List if you Clear Holiday List Click El to clear have modified any thing holiday list completely Delete a Holiday Add a Holi2. Door Group Timezones 6 User Group 6 User Group 7 Mf re 16 Setting up a time zone Global Security Devices Wi Enterprise site SA a Access Levels i a Timezone o Time Period f Tim Period 2 1 Activate oliday access Timezones by eS ae a E clicking on on tue wed thu f at sur non tu Access Levels j on EE Access Levels 00 00 i 00 EENE E wea th f sat St A 3 ____________ Time Period 4 2 Click TimeZones Ic Note clicking on Timezones will turn it blue This y Active Now Time Periods indicates nezone No Never Active Timezones are Timezone 2 on the screen Timezone 3 now Timezone 4 Never Active Edit Timezones Never Active Never Active Timezone 5 Never Active 17 Click to save Time zone Always save re Timezone if you change any thing Time Period 1 Time Period 2 A a oe 00 00 a a 00 00 a a From OO elt OO i You can set up to 4 Delete Time zone IA holiday access a A 00 00 a o CS time periods in one time zone Please f _ WN 0 oe UQ E A WN UU UQ E S A Click if you mon tue wed thu fri sat sun mon tue wed thu fi sat sun Period for details see Manage Time want to clear the Time Period 3 E SEE selected time zone a 4 a E S 00 00 pe 00 00 holiday access
3. Input 3 3 3v Step 1 When the tick key is pressed followed by the Once this Input goes low it starts the arming process in Note During the Dis arming process the reverse happens Once the Manager user enters their code 0v falls off at output 1 which will trigger a dis arm at the Intruder panel which will then remove the Ov from the alarm output thus informing the GSD keypad at Input 3 that the Intruder 50 TROUBLE SHOOTING CONTROLLER ISSUE POTENTIAL CAUSE Wrong Comm port setting Wrong address in the controller Not communicating with PC Dip switches still in default position TCP IP issue Faulty comm port in PC RESOLUTION Set the comm port correctly Check PC Port Settings in Device Manager Set the correct address of the controller Set the Dip switches to the correct address and normal position Please see installation and user manual for controller Please check the IP Address and ensure you have correct IP Address for the controller Check against another computer laptop Power supply issue No power reaching controller Check 1 Power supply has power 2 All fuses are ok 3 12v is being sent to controller Cannot find doors All doors are defaulted Please make sure all doors were enrolled Doors are not online Check all doors are in the normal operating mode Blue Structural issues affecting Has customer done anything that could Take a
4. minus button until only one door is left application C Default the Controller 1 Remove the power 2 Set all the Dip switches to the On position 3 Re Apply the power 4 After power up sequence is complete restore the Dip switches to the address position D Connect the PC to the controller via the serial connect You may need a USB to serial adaptor and drivers for same Now go back to Steps 1 to 10 above 13 Installation Plan Plan all the time Within the user Repeat the steps 1 Repeat Steps 1 Plan and setup all the door groups you will need in the Installation remember that some doors will be their own Door Groups zones you will need to operate and control the doors and the users Decide days of the week and the holidays to be excluded group select the door group and 6 door groups then select the within the access time zone for this group door group 3 for each of the 4 for each of the user group Tips Tips Tips Make the doors first that will be their own Door Groups Make all the common doors the next group Note There could be several groups of common doors especially if they are controlled at different times Decide the days of the week you need to control Decide if one time period is enough or do you need more detailed Useall 4 time periods if you need differe
5. No Doors Assigned a DoorGroups No Doors signed 5 DoorGroupS No Doors Assignea Doors in Current Group Doors that are selected in the group are displayed in this list SETTING UP A CONTROLLER Controller Configuration Name Controller 1 abled e f TECZ IP Settings rial O Static If GSD Wi Plus Ctrl 3 15 04 05 11 0 Options Silent Operatia a Controller TCP IP Configuration Wireless Network H Access Conroller You can select a controller by 1 Click on Controllers Tab 2 Selecta Controller Controller1 is highlighted indicating that we are looking at settings of Controller 1 23 Controller Configuration This is the type amp Configuration Name Controller 1 Version Enabled software version of the Controller Silent Operation Enable this feature if you want the controller s internal buzzers to be silent Wireless Network Configure Wireless communication between Controller and doors See Configure Wireless Network for details Number Version D Wi Plus Ctrl 3 15 04 05 1 Options Silent Operation This box must be ticked for the controller to be online If you will untick this controller will be offline Hit ich to add more controllers in the system Hit ical to remove controller Always click to save controller settings 24 Connec
6. vamm manage lenost ral users tab by Wi Bio Options clicking on User Group Card PIN Co Car S Y 2 User 2 Full Access Y 3 User 3 Full Access Edit User 4 User 4 Full Access Select a user to DB 5 Users Full Access add edit a user 6 User 6 Full Access 7 User 7 Full Access ul 8 User8 Full Access A 9 User 9 Full Access e o User 10 Full Access ve 5 Time amp Attendance Please see user Time and Attendance Options CHANGE USER DETAILS Assign A User Group Users Fingerprints Assign the User Group here Name Please see enrol fingerprint via the drop down box You f User TA Options for details must have User Groups Sup 6 already set up Please see x Set Up User Groups ay Address a m ES i Pnone Toggle relay Verify photo i Alarm manager Challenge photo Custom Fields Card fob l g ge p User Options The fields Car Address PIN code jm Options a and Phone can be edited in X paee the Settings Tab to display User rap Cr User Photo Add Remove Photo of user Please see User Options for details what ever field you require e g Staff Number Company etc Save User 1 Full Access Click to save user details u 2 User 2 Full Access Always save user details if Y 3 User 3 Fi Aces you change any detail 4 User 4 Full Access 1 Enter user
7. Click on Doors Tab Select a door Doorl is Ae oe highlighted indicating oldie satis that we are looking at settings of door 1 All Day Every Day All Day Every Day 5 E E 5 Q D m E D a 2 2 92 2 p Iw 9 a4 Ma 4 4 35 Door Configuration Door Number h PESK Add Door Configuration es This is door number on the controller Hit ict to add more doors Number Controller Version Wi Pin amp Prox V3 7 J Enabled to the controller Remove Door Enabled This box must be ticked for the door to function as part of network Un tick this box if you want to take the door out of the network Version This is the firmware version of the door control itself This is important later if there are any updates Controller This is the controller no that this door belongs to Note There can be several controllers on a network Hit S to remove door from the network Save Door Always click to save door settings 36 Door Options OPTION PURPOSE Exit Always on Always allows user to exit This option overrides anti passback challenge photo and timezones Silent Mode If enabled there will be no audible tones or buzzer from the keypad for any operation Fire exit door If enabled the door will automatically open in the event of a fire alarm activation which is connected to Networ
8. alarm is being armed disarmed from this door control an output on the intruder alarm which will correspond with the status of the alarm system i e armed disarmed should be connected here with this option chosen This is how the door will realise if the intruder alarm system is armed or not Output1 Follow relay Interlock output Slave reader input Panel alarm output Output2 Door alarm or snoozer 41 Door Timers OPTION Door Relay Time DESCRIPTION You can select from the drop down box the relay time for which the door control fires its output Range 0 255 seconds Note If strike lock is being used that this setting must be 0 in order to avoid damage to the lock A momentary pulse of 200ms will be applied Please also ensure that the correct side of the relay is used depending on the lock type Mag locks should be connected to the Normally closed side of the relay Strike locks should be connected to the Normally opened side of the relay Always ensure that the Varistor is in the correct position as well Please refer to the installation manual for the correct position Door Ajar Time Door Bell Time This is the time set to trigger an alarm in the even that the door has been held open beyond the relay time An alarm will be activated via Output 2 triggering whatever is connected to this output when the relay time has expired plus the door ajar time This is the time set to trigger the door bell feature using
9. page 26 30 3 MAC Address Enter the MAC address for the controller Connection 1 TCP IP Click this button MAC Address 2 DHCP TCP IP Settings Select DHCP O Static iP DHCP Click Apply to activate Controller TCP IP Configuration connection Dynamic IP Address Click IIS to save settings 31 Configure Wireless Network Controller You are about to 1 Create New Network Click this button if you want to create a new network and follow on screen instructions configure wireless communication for this Controller Ed Controller 1 Create New Network 2 Allow Doors to Join 3 Secure Network Once all doors have joined the network you must not secure network to lock down what you have enrolled and to prevent any unwanted doors to join this network Allow Doors to Join Once the new network is created click this button This will allow any new doors without a network and within range to join the network Secure Network Note If you have more than one controller on a network repeat this procedure for each controller CONTROLLER INPUTS OPTION Not Used Fire Alarm override Intruder Panel DESCRIPTION Input does not has any function Input will respond to a fire alarm activation from a connected fire alarm system and will open any access door set as a fire alarm door With a connected intruder p
10. the Tick button on the door control Output 2 will trigger the device that is connected to it when this is pressed Time Range 1 10 seconds 42 Door Timed Actions OPTION DESCRIPTION Locked Inactive Time zone If selected the door will be locked as per a timezone chosen See Setting Timezones for details All day every day All Day every day If selected the door will be locked all day every day Unlocked Inactive Time zone If selected the door will be unlocked as per a timezone chosen See Setting Timezones for details All day every day All Day every day If selected the door will be unlocked all day every day Outputl Inactive Time zone If selected output 1 will be active as per a timezone chosen See Setting Timezones for details All day every day All Day every day If selected the outputl will be active all day every day Note Outputl is associated with the interlock feature Card and PIN Inactive This option should be inactive if door control is Wi Pin only Wi Prox only OR Wi Bio as it has no function for these door control types Time zone This should be selected if this door is a Wi Pin amp Prox and need to be operated in accordance with a Time zone period See Setting Timezones for details All day every day This should be selected if this door is a Wi Pin amp Prox and needs to be operated all day every day Any Card Inactive This option should be selected if this door c
11. time finish time Holiday Access End Time 14 00 2 00 00 00 00 Ea Click hol to allow user to a ays In a wee mor tue wed thu fri sat sun hol holidays Select days for which Please see Define Holidays selected hours are allowed Enter Start Time and End i c Time and Attendance Time Period NOTE You must have GSD user fingerprint enrolment reader ready to enrol fingerprints Active user This is the user you are enrolling the finger prints for a Ed Fingerprint Management a x 1 Enter user s PIN No 2 Click Create PIN for the Fingerprint Management ia Create Pin NO system to generate a PIN No This pin will be used in conjunction with the user s Click ic to activate fingerprints Fingerprint reader If reader has infrared red light illuminated it means reader is ready to enrol fingerprint Place a finger on fingerprint reader You can see the quality in quality field Recommended quality is min 85 for reliable operation You can see scanned fingerprint in finger print display You can enrol two finger prints for a user Click second le sign to enrol second fingerprint and repeat steps 1 to 5 Finger No E Fingerprint Display Once fingerprint is scanned you can see fingerprint here Delete Fingerprint Click ical to delete finger print No template present Quality Fingerprint Quality Displays qual
12. timezone period All day every day This should be selected if this door is a Wi PIN or Wi_Pin and Prox and needs to operate all day every day 44 SETTINGS Global Security Devices Wi Enterpri Settings Communications _ r Security fr User Defined Fields Database Path CaProgramData Global Security Devices GSDWinTraining Display sdf Configuration Configuration Download Change Administrator Password Configuration Upload Change Engineer Password Firmware Download anguage Anti Passback _ _____ _ Automatic Reset 2 0 227 1110 E Enable ow E 0 48121ED38B4129CD3C376E3392DF076A E Manual Clear oo m Application Passwords Application Access Settings You can select a settings by a click on Settings TAB 57607 BCF23DDE4ECS8E4CFD325AC0S4F 45 Communications Settings Communications You can adjust PIN Offline mode If selected length here controller will be Range 4 6 digits disconnected from application Any changes made in application will not go to controller but will be saved in the database NOTE Always do a configuration download if you have worked during offline mode Security Settings You can increase the security level by increasing the PIN length Note higher the length higher is the security Security PIN Length You can adjust PIN PIN lansth length here Insta
13. 34 SETTING UP A DOOR A 35 DOOR CONFIGURATION ziretenn eane oaeee ea E Ta EEE E A E EE EA E E EEE A EE E EEE AA e EE EEE AARS EE EEEE EARE 36 DOOR OPTIONS cui ii EE EE A ae don ERE E A EE A E A A AAE EE E EEA EEA E E E 37 ATARM OPTIONS id ini 39 CARD POB OPTIONS aii id tn init a Ao 40 PNPUTS LOUTPUTS sota ds deb dde eileen a Rit actoral thal ay tue 41 DOORS TIMERS tido is ada ld od bl coves oe ata tat dd lios 42 DOOR TIMEDACTIONS E uta ds tisdale ads atados 43 NN NN NN 45 COMMUNICATIONS SETTINGS iii A a a ias ON a dd i aci de 46 SECURITY SETI OS decada 47 USER DEEINNEDETELDS tl da asia d 47 ADVANCED SETTINO Soda 48 SITE MANAGEMENT do olds 49 ALARM MANAGER USER 6sissscncsciecccticetacbeecbecdatsctennssechoccobestasosevcessscvacessousesuesteascosbossescencenscsssensoesensess nen seebeeseessssoeaseassdoocsocevesGnobevsssuesoeeseosves ses 50 TROUBLE SHOOTIN Gsiiisscasscsesscdesdvcsascdaesecdsedvestivcscduasusceseasececesssustaebedscesdactuaseosedvcdes vasvesseceTnueedeeteseuesadesed dedb es sede duoeed sesbesseaesandcesedbedie deSoieed se svecscee doses des voseededseses seveeeacdesvcdesseawedeededeseee sees 51 CONTROLLER arsenal aa ce Ea ie Bele Le eh ade heck te Re Cee tt ht scaly ld Mt Bs Sek Lea wha ett has Rae katt ght aire ee Corea ie el oe 2 oe aS 51 DOOR CONTR OD escc2eses rele 208 ew e a drenado Dak Cela Leth ONO L A ale Hien Sees wit ach ucla lbh th alk idee eh atte tect ake an 52 SETTING UP A USER Activate the i
14. Doors to Join button NOTE All doors should be powered up at this point and the LED should be indicating that it does not have an network by flashing Red Led All doors will now start to beep once to become door one 7 Trip each door control one by one until all doors are The first door will beep once joined The second twice The third three times NOTE As you join one door all other doors will And so on till all doors are joined automatically start to beep the next door number 8 When all doors are joined Secure the Network Hit the Secure the Network button 9 Do a Full Download In the Settings tab hit Configuration Download and proceed NOTE if there are no fingerprints in the system now hit No when asked 10 Proceed to configuring all doors and Users Set up all Door Groups Timezones User Groups and User options If its an existing network that you want to default start here with steps A to D 12 STEP PROCEDURE ACTION A Default all doors 1 Easiest way is to Right click on the controller and default all doors at the same time NOTE If you have defaulted the controller first you will Or Right click on the door itself and use default option have to refer to the installation manual for force default 3 See Manual default on each door in the installation manual instructions for each door type B Remove all doors form the controller on the PC Hit the
15. OOD PRACTICE FOR SETTING UP A NEW NETWORK sscccssssscccsssccssssccessseccessssscecenscccessneccsessceeessacceessceccecnscsecssnsnccecessececscecesssaceeesscaccecsacaceesnaccecesssaecenscecesssacceessnsese 12 INSTALLATION PLAN aae AA 14 SETTING UP A USER GROUP ccone cess cian reor rosea E E E EEEa SE aE EO OE Osea SEO SEEE ETAS ES o SESSE AE SEES 15 EDIT USERGROUPS eiorinn a r A rE Aa nania a AE EA nE A ae E N a a N Aa a dial ista 16 SETTING UPA TIME ZONE AAA RR E A 17 EDIT TIME ZONES iia ii a A AE ANE E ARES RS 18 MANAGE TIME PERIOD 0 E O A EEE A eee eee ee A OAA 19 MANAGE HOLIDAY A 20 SETTING UP DOOR GROUPS coi a cveseseeeeeeoucesvessess 21 d 3715 HOM B 1 Gi 51 5 RAE Pe oo iaa 22 SETTING UP A CONTROLLER ois scsi csessscess ccszeeei sous dotesosecavecceecessocuteesseeus cessctusvaveesesse0ecazeeuecs vs 4essessesessauece 0s coueuevscuecesecousse ve soueceses60essesetes dobecoeesous odes cove E EEEE ENEs EErEE EAER ESE 23 CONTROLEER CONFIGURATION isis ceee hoe MS ses Se MS eA es a et es Sei es IS er A es MS ss Sc as 24 CONNECTING A CONTROLLER TO COMPUTER sis sssac bu 4 sissies dav avese aang co ar ie 25 SCTIAL CONNECTION ATE ANE shane band na ceded stiik E EEE EE acing sic ug idaobdan 25 TCP IP connecti ti de de tdi 26 CONFIGURE WIRELESS NETWORK i 32 CONTROLLER INPUT Sia canera E cuss abel ode edh casa E di 33 CONTROLLER OUTPUTS recre E EEEE EEE EEOAE EA EESE EEEa EA EEEE EEE EA EEA R EE octdeas s oxauedeseva caus ededans EEE EEEE
16. RC Output 2 must be connected to the intruder alarm panic input Door forced alarm If enabled Output 2 will trigger any siren buzzer connected when the door is forced open It could also be connected to an intruder alarm input A door contact must be fitted and connected to Input 2 so that the door control will know when the door is opened or closed 39 Card Fob Options OPTION DESCRIPTION GSD only If selected only GSD cards and fobs will work this system GSD and Paxton If selected both Paxton and GSD cards and fobs will work with this system GSD and HID If selected both GSD and HID cards and fobs will work with this system 40 Inputs Outputs OPTION DESCRIPTION Input 1 This input should be connected to an Exit Button Push to release and or a break glass unit If you require both they should be wired in series Input 2 This should be connected to a door contact or the contacts in a monitored lock This is how a door control will realise if the door is opened or closed If no door contact or monitored block is used this input should be strapped to OV so that the door icon doesn t look ajar Door ajar option should be enabled or disabled according to what is required Input 3 This is a programmable input Note Input 3 will always be associated with Input 1 Input 1 will automatically change to suit Options Description Fire Alarm Override Select this input ty
17. Y global security devices GSD WIN USER MANUAL Application Version 2 0 and above Date Written 03 09 2010 Copyrights 2010 2012 Global Security Devices All Rights Reserved www globalsecuritydevices com TABLE OF CONTENTS TABLE OF CONTENTS a a dececssusocecuaudecceesueccsecaucecrcuauses sueucesssucsoesessonssseeussoecbaees se seceevecsesedbceadessuuoceese Gece sueusecs evaucesssuousessecoutesesuouessemuescesdeeeseussoess 2 SETTING UP A USER coincida iii cusdebscoesace sesessesecsbceue cu suseet sosdsacessusesd esvcsesusQusseesveusbestsoeessdaesouseees opsdss tuoseocs bcdecscdessoueesseavenseassonseegusesudbsseescessducdessesseses tvaveeetecsees 4 CHANGE USER DETAILS neter hobs tevsascan deh cide tn sesexcleaebd dai 5 ENROL CARD OR A A s EEE E cs has sb a 5 sacs cas bcs ca os oo aa a aos ts 6 ENFOLA COP POD E EOE E EIE AEE EE seven EEE a tds lada sabes abanico 6 Enrol Batch Of Cards PODS vies ite cscs A A A dai leeis irc loli diabetes a aiia a ei Ea ibid 7 USER TIME AND ATTENDANCE OPTIONS ssssscccccecssssssscececccsessnsececececeeceseaesecececsesseaeaesececsesseaeseeececeensaaeaesececeesseseaeeeseceenesseaecececesessaaesecececeecesseeecececsensaaeaececccsensuaeeeseccceenenseaeceeseseseneaaess 8 Define TRA FIOUPS ii a ii iaa rai n dere liinda A Eeen E i AARETE oE E E Ona EEA TR ei dag ista 9 ENROL WINTE EIA I A DEEE E E E T E E E E E EE E E E E 10 LONA OPTIONS S EEE EE E EEA E S EEE E E TEE E iii E E E E E EE S 11 G
18. an 5 User Group 5 indicates E 6 User Group 6 UserGroups are 7 User Group 7 on the screen now 15 Edit UserGroups Each UserGroup can have up to 6 Door Groups and 6 Time zones Create Group Pin Access Levels 1 Enter user s PIN No 2 Click Create PIN for the system to generate a PIN No Time zones This is useful for a IAEA Timezones department where you don t Door Groups The Drop down box will have to issue each person display all time zones with their own PIC No bd available to be selected as Group PIN E T No Door Group y part of the User Group This drop down box will display all the doorgroups available to be selected as part of the User Group This dropdown contains following choices 1 Time zones 1 to 128 Select the time zone you require as per installation plan 2 All Day Every Day This dropdown contains Select this option if all following choices a doors are required to be 1 Door Groups 1 to 128 All Day Every Day All Doors accessed all day every day Select the door group you 3 Inactive require as per installation Select this option if you plan want to make the time zone 2 All Doors for this door group inactive Select this option if all doors are required to be accessed 3 No Door Group Select this option if you want to unselect the door group for this User Group
19. anel this input will inform the controller when the intruder alarm is armed disarmed or in alarm Tamper Alarm When connected to any device that needs its tamper monitored e g Power supply 33 CONTROLLER OUTPUTS OPTION DESCRIPTION Not Used Output does not has any function Door Alarm When a door control has an alarm issue this output will trigger the connected device or sounder Fire Alarm When a fire alarm is triggered via an input this output will activate the connected device Duress PIN Alarm When a duress PIN is entered on a door control this output can be used to trigger another device such as digital communicator Any Door Open When any door is open this output will trigger the connected device such as buzzer Door Forced Alarm Door Ajar Any door with a contact fitted to monitor the door which is forced open will cause this output to trigger the connected device such as siren Any door with the feature enable will cause this output to trigger if the door is left ajar Tamper Alarm Any tamper on any door control will cause this output to activate the connected device or intruder alarm panel if connected 34 Access Doors You can select Ala ition a door 1 2 Setting Up a Door Doors Configuration rlock Output Door Alarm or 8 zef Cem ard Fob Options Entry Door oor Timed Actions Door Options i CA A AS HOBECE
20. day Select a date in Select a date in the calendar calendar Click ial to Click did to adda remove a holiday holiday Selected date will appear in the list 20 Setting up Door Groups Access Levels me Pea Door Group b wh a E oor Group 1 Access Levels 1 Activate DoorGroups by clicking on Access Levels Tab 2 Click DoorGroups Note clicking on Door Group 2 No Doors Assigned 2 z Door Groups Edit DoorGroups will turn it blue 3 Door Group 3 No Doors Assigned This indicates 4 Door Group 4 No Doors Assigned Select a door DoorGroups are 5 Door Group 5 No Doors Assigned group to edit on the screen 6 Door Group 6 No Doors Assigned now 7 Door Group 7 No Doors Assigned f 4 m 21 Edit DoorGroup Access Levels nS EA Available Doors DoorGroups This list contains all door Tet o currently available in the Click to save Time zone Always save if you change any Save Time zone All Available Doors Desis in Current Group thing system NETA Door Group 1 Add a door Select a door from the list and drag it to Doors in Current Group to add a door in current door group Delete Time zone Click iam if you want to clear the selected time zone No Door Group Doors Door Group 1 No Doors Assigned TR No Doors Assigned 3 DoorGroup3
21. eps Steps 3 8 show the images for Windows Xp If you have different Operating System please refer to Windows Help for changing IP Address of you computer 1 Default Controller Set all of the dip switches in a controller to ON before you power up the controller 2 Set Dip Switches Once the controller is powered up Set the dip switch number 1 to ON and dip switches 2 3 and 4 to OFF Step 3 In Windows Xp click on Start Menu gt Control Panel gt Network Connections gt Double click the network you are connected to Note This should open properties as shown in picture below 27 Bridged Properties General Advanced Connect using BB VMware Accelerated AMD PCNet Ad This connection uses the following items E Client for Microsoft Networks a File and Printer Sharing for Microsoft Networks M JE QoS Packet Scheduler Internat Protocol TCP IP Description Transmission Control Protocol Intemet Protocol The default wide area ngtwork protocol that provides communication across diverge interconnected networks Show icon ih notification area when connected Notify me when this connection has limited or no connectivity Cancel 4 TCP IP Properties 8 Click OK Select Internet Click OK Protocol TCP IP and click on Properties 5 Manual IP Address Select 1 Use the following IpAddress 2 Use the following DNS server addre
22. figuration Upload Change Engineer Password Automatic Reset j Application Please follow onscreen instructions to download License 57607BCF23DDE4EC38E4CFD325AC054F firmware Here you can clear individual users or all Application users manually and Application Software instantly by clicking on Version Hardware ID License are displayed here You may require Clear Button them for technical support Site Management Recent Site This will open the last site you were working on Create New Site You can create a new site and configure all doors controllers and all settings Note Always do Configuration Download after creating a new site Ed Site Database Management Open Most Recent Site Open Existing Site Convert Wi Plus Site to Wi Enter i fl Show site management on start up 4 Existing Sit You will be required to select the site you want to manage operate Wi plus to Wi Enterprise This will be relevant when site is being upgraded from Wi plus site to Wi enterprise site ALARM MANAGER USER NOTE All GSD Outputs are Open Collector Outputs Max 12V 100ma Follow Steps 1 to 4 for the sequence for arming Step 3 Once the Step 4 Once Input has been switched low by the intruder panel The door control then knows that the Intruder alarm Step 2 i
23. form the user how it works Check that this correct and required by the customer Do a Full Download Power supply issue No power going to the controller Check power supply has power all fuses are ok and 12v being sent to the Controller Lock problems Lock is not getting power Varistor is in the wrong place Check voltages at the lock when keypad relay is operating Check the correct position in the manual for the lock type Door control problem Wiring is wrong Bad radio location See if swapping the door control with another resolves the issue No beeps coming from the door control Silent mode enable Switch off Silent Mode 52 E gt global security devices No 1 Turnpike Business Park Ballymount Dublin 22 Ireland Telephone 353 1 524 2691 Fax 353 1 4430 430 www globalsecuritydevices com
24. hoto option enabled When enabled user s photo will appear on PC Screen at the time of door access Administrator must allow access to user by clicking on Open Door button when window pops up on the PC Screen GOOD PRACTICE FOR SETTING UP A NEW NETWORK STEP PROCEDURE ACTION Start from here if it s a new Controller steps 1 to 10 1 Note the Comm Port number used by the serial Go to Comm Port setting in PC and establish the comm port cable in the Device Manger settings in the PC Set number that the serial lead is now on if necessary go to the the same comm port number in the Application in advance tab and select the comm port number manually the Settings Tab Set the comm Port number in Settings tab to match NOTE Once the connection is made the Controller will appear in Blue 2 Add the number of doors you need for this network In the Doors tab hit the button to add doors until you have all doors added 3 Make sure all doors are Enabled Tick the Enable box in all doors 4 Do a full Download now In the Settings tab hit Configuration Download and proceed NOTE if there are no fingerprints in the system now hit No when asked 5 Create a Wireless Network now In the Controller section click on Wireless Network and then in the new the new box click on Create New Network 6 Allow Doors to Join the network Hit the Allow
25. ity of Fingerprint scanned Recommended 85 User Options Import User List Print ID Card This will import user list Click here to print the list of Click here to print ID card for from a csv file all active users the selected user Note all users in csv file Note you should print ID Export User List will be imported card on ID card printer for This will export all the users better quality in the system to CSV File Note You can open this file in notepad or Microsoft Excel if you have Microsoft Excel This option works when both available in your system F E FA the user and the door see Door Settings for details have verify photo option M Alarm manager E Challenge photo enabled When enabled user s photo Toggle Relay will appear on PC Screen at This option works when both the time of door access the user and the door see Door Settings for details have toggle relay option Challenge Photo User with this feature This option works when both Toggle relay E Verify phos enabled When enabled user can hold the door open enabled can arm and disarm the connected intruder alarm The door control will also need the feature enabled and the User must press the tick key on the door control first before entering their code for this feature to function otherwise the door control and user will act as normal the user and the door see Door Settings for details have verify p
26. k Access Control System Only doors with this feature enabled will be opened Input 3 must be connected to the fire alarm ouput that s triggers when the fire alarm activates Door open chime The door will chime when a correct code fob fingerprint is presented and the relay is operated to open the door Toggle Operation Anti Passback door Anti tailgate If enabled in conjunction with a Toggle User User can keep this door open permanently until the user enter code fob fingerprint Note This setting will only work if both door and user are set up for Toggle Please see User Settings If enabled all users can only pass through this door once in 24hr period unless they exit through an Exit door control elsewhere on network This feature if enabled will automatically be reset at the default time of midnight for all users but can be changed to another time through Settings Tab Please see Settings If enabled the door will lock aprrox 3 seconds after the door closes The door must be monitored with a door contact for this feature to work Example relay time is 30 seconds door closes in 10 seconds Release time is shortened to 3 seconds The remaining 17 seconds are discarded Verify Challenge This feature works in conjunction with the two options in the user settings Please see user settings Photo If verified photo feature is turned on for the user and enabled here as
27. llers PIN 6666 Range 4 6 digits User Defined Fields User Defined Fields User Defined Fields User field 1 You can define fields for user here to whatever is required e g staff number User field 2 Use field 2 SS department These fields are in User Settings Please see Change User Details for more details A AOS Enter new license for Please see site software when instructed management for details Database Location This is the file location of database on you computer a This is important as you Change Passwords can save a copy or email a C ProgramData Global Security Devices GSDWin Training Disp asdf Change administrator copy if necessary Engineers PIN here Configuration Application Passwords Length of PIN can be Configuration Download A la A adjusted in Settings TAB Configuration Download Configuration Download Software Activation Al Change Administrator Password eee see 8 security Always do a configuration settings for details download after 1 Setting up new doors 2 When you make critical changes e g fingerprints If you enable this option and enter a time Anti Firmware Download 2 0 227 1110 Kape Passback will be Firmware Download ae automatically reset for all ETE DE 48121ED38B4129CD3C376E3392DF076A users at this time each Manual Clear day ED Con
28. nt controls on different days More than one door group can use the same time zone Select the Door group and the time zone remember this could be just one door in its own group E g an apartment door having access all day every day Example when using more than one Door Groups and Time zones within a User Group would be large building with different departments and different Door Groups and time zones but you want the same users in this User Group having access their as well E g The apartment owner having access to a common area like main entrance door to the building or to common recreation area 14 Setting up a user group User Groups are made up of Door Groups and Time Zones See Setting Up Door Groups and Setting Up Time Zones for details Note You must have the Door Groups and Time Zones already set up at this stage Otherwise every user is going to have Full Access All Day Every Day SN Global Security Devices Wi Enterpr Access Levels Usa Group Ee Full Access No Door Group y No Door Group y Access Levels Create PIN I Activate T clicking on Access Levels Tab No Door Group z 2 Click User Group Edit UserGroups UserGroups p Select a 2 User Group 2 U A i ee serGroup to edit Note clicking on 3 User Group 3 P U serGroups will User Group 4 turn it blue This Co
29. ny necessary action including moving the controller to resolve network interfere with the system working now Customer should be aware of the issue and that this is not a product problem 51 DOOR CONTROL ISSUE POTENTIAL CAUSE RESOLUTION Door is not Enabled Enable the door and save Door has been defaulted Re enrol the door and save Door appears off line Grey Door is off line 1 check the network is running by checking other doors 2 Check the condition of the LED on the keypad Door is working sometimes and not other times Door is controlled by a time zone period Check all time zone periods if applied Door is permanently locked Door is permanently un locked Right click on the door and put door to Normal Blue mode Right click on the door and put door to Normal Blue mode Possible toggle feature is being used by a toggle user Check if this correct or a mistake and rectify User is a timed User Check setting Wrong timed action Set the correct action for the door Door is not working for some users Wrong code or wrong fob check the user has the correct code and fob Outside door group User group Anti passback is turned on Check the user has the correct User Group and permissions Remove anti passback or inform the user how it works Challenge feature is enabled by mistake Interlock has been programmed and wired Remove the challenge feature or in
30. ontrol is Wi Pin only or Wi Bio only It should be Note Be careful with selected for Wi Prox only or Wi Pin and Prox if you don t want ANY card operating on the door this setting which is not necessarily on the system at all Time zone This should be selected if this door control is a Wi Prox only or Wi Pin and Prox and needs to operate in accordance with a timezone period for any card even when the card is not on the system All day every day This should be selected if this door is a Wi Prox only or Wi Pin and Prox and needs to operate all day every day for any card presented For example the entrance door to an area where ATM machines are available or an engineer on a site Card or PIN Inactive Card or PIN should be selected as Inactive if you don t want any card or PIN operating the door control It could be selected if the door is a Wi Bio Time zone This should be selected if this door is a Wi Pin only or Wi Pin and Prox and needs to operate in accordance with a timezone period with either the card or the PIN All day every day This should be selected if this door is a Wi Pin only or Wi Pin and Prox and needs to operate all day every day PIN only Inactive PIN only should be selected as Inactive if this door control is a Wi Prox only or a Wi Bio as it has no function for these door control types Time zone This should be selected if this door is a Wi PIN only Wi Pin and Prox and needs to operate in 43 accordance with a
31. pe if door is connected directly to a fire alarm system trigger Fire exit door must also be selected in the Alarm Option in this section Lock Door Select this option if an external source such as switch or intruder alarm is used to permanently lock the door As long as input has this trigger the door will remain locked Card and PIN Select this input type if door control is connected directly to a time clock or a manual switch The user card and PIN will then only work when the input is triggered All other times the user cant use the keypad Card or PIN Select this input type if door control is connected directly to a time clock or a manual switch The user Card or PIN will then only work when the input is triggered All other times the user cant use the keypad Interlock Input Use this option if the door control is paired with another door control for interlock purposes Interlock is where only one of these doors can be opened at a time If one is open it will keep the other closed through this input Output from this door control should be connected to Input 3 with this option selected on the other door control and Input3 on this door control should be connected to Output 1 on the other door control External Reader If a slave reader is being used on this door connect its output here with this option selected Also in the door options please make the selection so the slave reader has the correct function Panel Alarm If an intruder
32. s PIN 2 Click Create PIN for the a a system to generate a PIN 6 User 6 Ful Recess 7 User7 Full Access 8 User8 pS na see Enrol batch of 9 User 9 Full Access Cares mM 10 Full Access Enrol a Card Fob Please see Enrol a card Enable a user by clicking the Enabled box Enable User Enrol Card or Fob Enrol A Card Fob Reading Card Fob ID Enrol Card Fob Enroll Card or Fob l Once the Card fob is 6 gt To Learn a card or fob Select door control or reader to enroll presented to the selected From this drop down and present card or fob door Card Fob ID will menu select the door appear here control that you want to present the card fob to for reading Card fob number Typing Card Fob ID You can also type Card Fob ID if you do not wish to scan it Enter Card No Enter the first and the last card of the batch here NOTE All cards should follow numerical order Enrol Batch of Cards Fobs First User of Batch Ed Enroll Batch of Cards Enrol Card Automatically NACE Select the first user number 8 of the batch here from the r Assign Cards to Users ies ln aaa drop down box First user First card E fob automatically by presenting it to a prox door Last user 1 Last card a Fi control ES x Please see Enrol A Card Fob Y Enable users Access Levels Fl Enable use Ticking this box will enable IN As
33. sign users to group the access level menu where you can decide what usergroup can be assigned Add to these users User Time and Attendance Options Customize T amp A Options Select this box to enable all fields of Normal Time and Overtime for this user Always Normal Pay Click here to set user with normal pay in all hours Define Normal Hours If you would like to define normal hours for T amp A click here Please see Define T amp A Hours Normal pay rate Enter normal pay rate for this user Ed Time and Attendance Outside Normal Hours Click here to select all time outside the hours of Normal Time as over time User Time and Attendance Options Specify personal TA options for this user 2 always 2 select G outside normal select Always 4 Outside Normal Hours NJ max hours per day max hours per day ooo E 00 00 5 no i s per hou default pay rate per hour A O if unused If you would like to define AAA overtime hours for T amp A click here A eS SSS Please see Define T amp A Hours Normal Time Overtime Overtime pay rate Enter Overtime pay rate for Maximum Hours Adjust maximum hours for this user normal and overtime per day Define T amp A Hours Ed Time and Attendance Start Finish Time Time in 24 hour e g Start Time 08 00 start
34. sses Internet Protocol TCP IP Properties General You can get IP settings assigned automatically if your network supports this capability Otherwise you need to ask your network administrator for the appropriate IP settings Obtain an IP address automatically o IP address Subnet mask Default gateway Preferred DNS server Alternate DNS server 6 Type IP Address 7 Click OK Please Enter any IP Click OK to accept IP Address in the range Address 169 254 1 xxx 2 250 Enter Subnet Mask 255 255 255 0 28 9 If you have successfully completed above steps please connect the controller to your computer 10 Start GSDWin and log in as Engineer Controller 1 03 09 2010 09 12 14 Administrator logged in 03 09 2010 09 12 11 Application Startup 03 09 2010 09 1208 New Database Created 11 Controller Click on the controller you want to configure 29 11 Select TCP IP Select Type as TCP IP 12 Ip Address Enter Ip Address 169 254 1 1 Click Apply Controller should go online i e blue colour 12 Select TCP IP Select TCP IP Settings as Static IP a RA Controlle 1 169 254 1 1 l Type TOP IP Settings Apply gt E Se 3 3 O 9 DH Controller TCP IP Configuration 13 Controller Configuration Click here and follow Instructions in Static IP Address under setting up a controller on
35. ting a Controller to computer A controller can interact with computer through multiple ways 1 Serial Connection 2 TCP IP Connection a Static IP Address b Dynamic IP Address Serial Connection p Connection 1 Serial Connection Address Select the type Serial E Type TCP 1P Settings Apply Serial Static IP O TCPAP O DHCP Click Apply to activate Controller TCP IP Configuration connection 2 Address Please enter address as per DIP switches to which controller is configured Click el to save settings 25 TCP IP connection Static IP Address 1 TCP IP configuration os Click this button This is used to send new settings to the controller ir Address Click Apply to activate connection Click ON to save settings 0 0 0 0 Type TCP IP Settings Serial Static IP O TCRAP O DHCP Controller TCP IP Configuration Ed Controller TCP IP Configuration 2 Static IP Select Static IP Static IP Settings IP Address 0 0 0 0 3 Ib Address Netmosk Enter the static Ip Address for controller Default gateway 4 Netmask Enter Netmask of network Send new settings to controller 5 Send Settings 5 Default Gateway Click this button to send Enter default gateway for settings to controller network 26 Configure a New Controller with Static IP To set up a controller with Static IP address please follow the following st
36. well The user s photo will pop up on the screen when the user access through this door If challenge feature is enabled for a user and enabled here as well the user s photo will pop up on the screen when they attempt to access through this door However the door will not open until the administrator hits the Open Door button once they are satisfied the correct person is being allowed access Invalid Token Mode The door will be locked out for 5 minutes after 5 minutes Entry Door If enabled the door control is outside and is allowing access into the building If a slave reader is connected the slave reader will automatically become an exit reader allowing access out of the building Note this is important feature for time and attendance Exit Door If enabled the door control is inside and is allowing access out the area building If a slave reader is connected the slave reader automatically become an entry reader allowing access into the building Backlight always on If enabled the backlight on the keypad will be always on If disabled the backlight will be automatic once they first key is 37 pressed on the keypad Door bell If enabled the tick key on the door control acts like a door bell button when pressed Output 2 on the door control can be connected to a siren or a buzzer etc which will activate when the tick key on the door control The amount of the time that the output activates for is controlled b
37. y the Door bell time in the timers of the section Scan mode always on The fingerprint scanning sensor red light will be always switched on 38 Alarm Options OPTION DESCRIPTION Intruder Alarm Door If enabled this door will act as keypad for Arming and Disarming the intruder panel alarm Note the user must also be selected as Alarm Manager user in the user tab See User Settings for details Input 3 must set for Alarm Panel option and connected to and arm disarmed status output on the intruder alarm Output must also be connected to an intruder alarm input which is capable of arming disarming the intruder alarm when activated or deactivated Door ajar alarm If enabled Output 2 will trigger any siren buzzer connected when the door ajar time has expired The door ajar time is selectable under the Door Timers see Door Timers for details and the alarm will occur when the time has expired after the relay time i e Door Relay Time Door ajar time when Output 2 is triggered A door contact must be fitted and connected to Input 2 so that the door control will know when the door is open or closed Enable duress If enabled a duress code is generated whereby the door will open as normal but will send a silent panic alarm trigger to the intruder alarm panel A silent panic alarm can be sent via the intruder alarm digital communication to a 24 hr alarm receiving centre A
Download Pdf Manuals
Related Search