Digital Video Recorder User Manual - AVI
Contents
1. lok e q mryt Pi Rae LEi Oir i rL Add user Enter User interface press Add 1 Input a user name to the edit box Remark please refer to 3 3 2 4 edit box 2 Set the password The password is less than 6 numbers 3 Set the authorization for the new user tick it to enable it 4 Save the new user by click OK Modify User Enter the user management interface and choose a user from the list then press modify or right click to enter the interface of modify user Remark Only Admin can modify other user s information Delete User Enter the user management interface and choose a user from the list then press delete this action will delete this user from system after pressing OK The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 16 3 8 1 3 Default Reset the configuration to default the system will restart Manually clear all alarm information It will show Clear alarm successfully press ok to return to former interface Choose the target to upgrade and then choose the method USB or FTP USB method Copy the upgrade files to the root directory of the U disk then click ok to upgrade system FTP method Put the upgrade files to the root directory of the FTP input the IP address of FTP server then press OK2. Video Loss Warning Motion Detection Warning Hard Disk Formatting Warninc Read Write Disk Warning Mask Warning Video Format Warning Illegal Visit Warning Warning Linkage Type w E w w Warning Ball Image Electronic Map Warning Sound Warning Linkage Wideo Record Copy To All Devices 5 9 Log E 2009 12 19 00 00 2009 12 19 23 59 Index oper Content _ Operator Area Name ServerName ChannelNa LogType OperatorLog hs s EndTime 1 Operator Log Search Operation log of client 2 Warn Log The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 49 Search warning log of client 3 System Log Search System log of client 4 Remote Log Search remote log of client Appendix 1 Installation and Instruction Using 12V 3A DC Power Supply please use the standard electrical source Keep horizontal in installation or using avoid tilted or upside down Don t put metal objects into the chassis to prevent electric shock Don t put the DVR in wet or dust or liquid splash in the DVR as to avoid internal short circuit or fire Keep clean and dry Ensure the host and chassis GND after installation there is a GND port in the rear cover In order to avoid video and audio signals be interfered and to avoid the HDD
3. Low Volt or High Volt according to the type of alarm equipment Detect Set whether the alarm input signal is detected The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 21 PTZ Click PTZ to enter PTZ Go work interface user can set preset cruise track from here And the setting method please refers to Delay Set the delay time of processing after J mi 5 Enable Preece Frengi alar ung Enable Gruiee Buzzer Whether to activate buzzer alarm Rec CH Set the recording channel after activating alarm equipment Alarm Out Set alarm out channel Copy to Copy setting to other channels After setting completely Press OK to save and exit or press cancel to exit but the setting will not be saved 3 8 2 5 Alarm Out Output channel Click select box to choose target channel Alarm Type Open or close 3 8 2 6 Record Schedule F ma Channel Click select box to choose target G 0200s 11 18 43 28 E ord So chamnel ee Week Choose a day to set all means all days Record type and Time User can set different in 4 periods SCH red MTD yellow and ALARM green V enable o inefficacy Which will show the time statues in the below Copy to Copy the same setting to other channels The manual will be changed timely without notice If a
4. 3 1Turn on off Before turning on the device please make sure AC voltage connect with DVR match the DVR requirements and ensure that grounding part 2009 11 11 12 53 42 3 of plug for DVR has a good connection with ground T ls After connecting power DVR will trun on and 100 10110 o SOTO LOOT Lee AORDI A LIDADE vol ee a 140 HN 199 Le 001010100120 1010 the power light will trun to red the RUN light will flash to indicate it is normal working Press the power button for 5 seconds to trun off the dvr and the power light will trun to red press this button again the DVR will restart 3 2 Preview After start up system the screen has live view area ae 14 37 16 MINA which shows date time and channels name on the on 02 screen User can select to display a single moc particular channel by pressing the corresponding Numbers buttons 1 16 or press the left button of mouse and then press MULTI on panel or left ae gt a button of mouse to return CH 13 CH 14 CH 15 CH 16 The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 3 3 On Screen Menu 3 3 1 Main menu MS 8 Main menu Menu Enter main menu Play back Play Enter playback interface Record REC Enter the Manual Record 2009 11 11 18 36 39 PTZ Enter the PTZ control interface 3 3 2 Tools There are foll
5. 1 J or mouse to set brightness contrast hue saturation The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 20 Default Restore the image parameter to the system default setting Blind tick it to activate Area button then press area to enter setup interface Set blind area After enter the area interface there will pop up a yellow box it is blind set box Area creation Switch the yellow box to red Red box is effective area by FN button on panel then press direction key or mouse to adjust the size of area 4 areas can be set at MAX After setting completely Press ENTER to save and exit or press STOP to exit but the setting will not be saved Part clear Switch the yellow box to black Black box is clear area then press direction key or mouse to clear area After setting completely Press ENTER to save and exit or press STOP to exit but the setting will not be saved All clear Press menu to clear all area Copy to Copy the same setting to other channels Remark The channel name can t be copied After setting completely Press OK to save and exit or press cancel to exit but the setting will not be saved 3 8 2 4 Alarm Input Click Alarm In to enter this interface 11 618 42 33 Input channel Click select box to choose target channel Alarm Type Set to
6. 1 2 H Chrl 2 Rate 2 B Rate 4 F Rate 3 Stop s trl 5 Mute m Ckrel HM Snapshot A Chrl 4 Print Current Image TopMost T trl T FullScreen Escape Fullscreen F CTRL Enter PLAYER Play Stop Slow Quick Pre Mext Step Map Play Stop Showy Quick Pre Pes Step Map E y se E e x File F Control c Rate R Help H File F Control C Rate R Info I File Info 1 Copyright 4 Chinese English PLAYER PLAYER Stop Slow Fre Hext Step Map Play Stop Slow Gai cle Pre Hext Mar The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 53 Appendix 4 FAQ 1 The host is not running after connected to the power DCheck whether the power switch is turned on 2 Check whether the operation of the boot is correct 2 The boot is very slow DHDD errors maybe cause the DVR repeated testing the hard disk please check the hard disk or change another one 3 The DVR doesn t display picture Check if the DVR is turned on If the DVR is powered on the power light will flash 2 Check if the video cable is connected well 4 The video is distorted 1 Check the video cable to see if it is well 2 Video line subjected to strong electrical interference the video line cannot work together with strong electrical wire 8 Check
7. 205 123 102100 AR MES D 13111 20110 5E MELIDE 1 12 da 1 16 0 4 File Type Al Start 2009 12 18 00 00 00 m o o aso ou a w 2009 12 18 14 26 42 Y Search TimePlay m Smo Ree Se Remark time play support 4 channels at Max It will close all channels playback 3 Remote Download The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 42 Select the file in the search results click on the right side of the File Download to start the file download it will show progress bar in below TotalPages E Current ca E roD Select the window to control playback control bar shows the speed and progress of the current window user can drag the progress bar and pause stop snapshot click Stop All to stop all playback 4 Local Playback Click Playback And then choose Local Playback to enter local playback interface Local playback has the same operation with the remote but the Play Back AE recorded files can t be downloaded the file types can t be Remote Play Back selected Local Play Back 5 7 Server Setting TLClient Preview Play Back ServerInfo Channelinfo Alarminfo UserInfo RecordInfo videolnfo E 11 O h 264 DY Device Manage Device Info DeviceName DeviceModel Mac Addr Server Sett
8. Auto Logon The logon window won t appear next time User Logon Bip verve awl GA pasword PassWord Confirm 5 2 3 Software Interface Instruction The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 34 TLClient Preview Play Back Device PtzTrack PicAdjust Cruise PtzCtrl PreSet Light Left Stop Right Wiper Do 6 Speed Time Info Az RIS Subtra IRIS Add 7 ICL add 1 System Button Lock Minimize and Close button 2 Label Which include each functional module of software Preview Shows a real time preview of device Playback Local and Remote Playback Set Device Management Server Setting and Client setting Log Local and Remote Log searching Map Electronic map 3 Device tree Shows the devices and Groups which user have added to the management 4 9 6 7 Preview windows Shows the real time preview on the screen PTZ PTZ control and Image adjust Preview control Label Clear Or stop preview record snap mode switch Loop setting List of alarm information 5 3 Device Management The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 35 TLClient Preview Play Back Device Device Manage Server S
9. Fi US PODER Eo ee at E o cn AE A er eae ere ee A 28 ACOSO ects ae rama ie kana aoe eau dame wae alee 29 A cease taatleei aces E aerdnk ceunsaideteectaneip waduatidamian cad scaaateiesteeae wage ented ndceaamnsans 29 44 Advanced SEUNG ined aiii das 29 AO AIK TO AIK COMMO o a 30 AG COMM GUN siii iii 30 A ee ee ee ee eee eee ee eee eee ee eee 30 LOZ SnaMBla iio 30 A A es 30 A A O 31 A A A eee ee eee ee 32 421 Remote PVD Kami riada aada 32 Ghaptero Cent SONWANE ciar sd rain 33 5 1 Hardware TOQUE Ned dic 33 5 2 Operation the client Sotware arenai a a e 33 5 3 DEVICE Management ti AEn 34 DA VIGO OVW aiia 0 PO EE O A O taht ete 38 SAR CONO IPPO eA rt rat OS ee ee Oe eee ee ee 40 5 0 Recora and playback rerien e a a a a A A 40 o eNe SENO ssia A a a EA 42 So CHEN Serg A o o A ashore donc tcden ueetcacea eee otra a 46 Appendix 1 Installation inStructiON ocooccocccccconconcocnccnconconconncnnnoconnonannnnoncononnnnnnnnnnnnanennnnnnns 49 APpenalxZ Alarm CONNECION aiii A A 49 Appendix 3 BackupablaVDackiuiniai E E a 41 Appendia FAQs ida os 53 Chapter 1 1 1 The product summary This equipment is a digital surveillance product which uses an embedded processor and embedded operating systems combined with the field of the latest IT technologies such as video and audio compression decompression high capacity hard disk recording TCP IP network technologies the code embedded in FLASH making the syste
10. Log oO eee Remote Play Back M11 h 264 DYR A Device h 264 DVR Start Time TotalPages 3 ARAL 192647 EREET HUE Choice FAA EE MIO Current o WAS Ba DRIER ZOMG 190138 DELIN 10 12 201E BRE DIE 1 2190137 Next ZPB NEL BSE a E 16 ZUMA BE Ber eae ZOMG BAT DELEN ZL DE DELMEK ZRA 18 11 DEHE FAA ANE WEAR File Download TWA Liei IELAI HTS NA cia CC MELAS TRA LEANE IEA 09 145 101242 0 DI 2200 1143 121415 DELIA LG 15836 OE LLM File Type Al m o o ao u na Start 2009 12 18 00 00 00 TN 2009 12 18 14 26 42 THe amp FE Search TimePlay m Noms Choose a device in the list and then select a channel set the type and time then click Search it will show results of searching User can turn page in the right side 2 Remote Playback Choose a window for playback Pitch on recorded file in the list double click or click Play file button Set query click on Time Play it will playback according to chronological TLClient la Preview Play Back Set Log Remote Play Back Mii j h 264 DYR Start Time TotalPages 0 As 1B 9 102 ARTERA AEAEE cl mm ee ee Current Go SUMS A DHINES 209403 19113 9191000 201100183305 0001119190137 OIE 18 55 0E1315 OH BN EAI a DOG 183007 DELAIN z 091145 DEE DELIMA 20 1145 18 11 21 DELALE FR 43 RE 1E4311 TWLA Liste IELAI EAL 815 3006 11 13 17 5435 SE ZOOL IDR OO 1 ee DME PET WETE AR T LS INE ELLE 209 145 10 16042
11. Te ae 8 SL PATO Wa AS dos 8 De O DCMS Men ad e O E E 9 Jo Mal DUO Neal cidcid dados 9 A Lo 0 PA A O gg tees aa banana aeaeeces E 9 a A E CO OO densa denuidadautandcmuaionreenaniaehs 10 SA Mal Mela ta iia 10 29 Os AAA o PP hsadehan tite tea Sat caeste a se duatahunaamauinpeace amen umemecnaanoacme tne 11 SEO e212 A one I OD er ne eo Ree E ee 11 SOL SOANG IMIR O SUI Ui ai dis 12 30 0 AVI ACK OO Sit A acted i 12 SG WAMU FECOLO essa esla sida 13 SFPA area aia ahaa ne enc eee ag cade enone Be aah cae ena aaa aa 13 3 0 Mall MeN Uae sci sauna cnn dada id 14 3 9 1 Management OO Simio A st 14 A A e e CO E anes 14 O e a 15 DONO Detalla ia 16 Solay ICAL UMA aside aa 16 Joko Upgrade said ictericia 16 30 kO Dates TIM sic sae Raatines 17 3 917 SYSTEMUINTOMMATION sii i 17 30 2 COMUS SCD iaa 17 3 0 2 1 CONnfg re SysStem tddi 17 JOA RECO O A E inte tt SC er SE eee ee At ee nee eee 18 3 0 2 9 IMAge VISO a da 19 SO LANA A ia 20 310 20 Alarm OULU ari aida lia aaa 21 NOZIO OCHS UNG aa 21 3 0 2 1 Motion Detection sanidad 22 A A A A ere ee eee 22 A A e UU E E 23 O o rear ee a A A ee e The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly a tT CL CLOW cca EOS PU EEE A 25 Chapter 4 Remote viewing through IE ccoocccocncccnccccccocnconnconnonncnonononnnonnnnonnnonanonnnnonononanonoss 25 a a
12. be damaged by the static electricity Please install Thunder Protection Devices Ensure the HDD is connected correctly or it won t record Don t cut the power or turn off the power switch when you shutdown Or it maybe damage HDD Don t insert unpin the cable video audio RS485 electrify or those ports are easily damaged Hardware hot plug is prohibited Make sure the voltage power supply of DVR stability Using the stability and small interfering power input ripple Keep in cool and ventilated environment don t block the fan vents Please use lithium batteries for motherboard if the system time shows abnormal Please replace the batteries with 3V lithium batteries Note User must cut off the power before replace it and please properly dispose of old batteries Appendix 2 Alarm Connection Alarm Connection Method 1 Normally Closed If the sensor is normally closed and in the connected status the output 12V voltage will go through the resistor and then be connected to the alarm input port which can meet the demand of the specified voltage Once it encounter the event of alarm the sensor will be disconnected the output voltage will turn to 0 the alarm will be triggered Remark the power of sensor is supplied by DVR The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 50 DVE probe The un
13. by different solution please confirm with the manufacturer directly 19 pn j ae iy CBR Constants Bit Rate the video stream is a EEn Pe based on user defined bit rate and video frame rate VBR Variable Bit Rate video stream is based on user defined record quality and video frame rate but the bit rate will be adjusted by system automatically according to the environment P F A cH 13 r GH 14 r 15 r CH 16 Bit rate The higher bit rate the better record quality and the hard disk space occupied are bigger Frame The higher frame the better record fluency and the hard disk space occupied are bigger Quality five levels best better good normal bad worse Select best the video quality will be the best Copy to Copy the same setting to other channel After setting completely Press OK to save and exit or press cancel to exit but the setting will not be saved 3 8 2 3 Video Channel Choose a channel to set ae se Name Input a channel name to the edit box Nan Mamo Show Name B Position Show Time Ei Position Show Name Y means show name Br i girtmesu Contrart o means hide channel name Press u ET wed nue Nie Position to enter setup interface then saturatian Blind Bi Area Default choose a position to show channel name and press ENTER to save and exit or press STOP to exit but the setting will not be saved Image parameter Using the panel
14. cruise path OSD Option Set the position of channel name and time adjust it by dragging mouse and press OK to save MD Param tick show motion detecting area to set the area of Drag the mouse on video window to set ee Prete tors te motion detection Add Area Press the left mouse button 55 ee i to set on screen Output Output Qutput3 Output4 Clear Area Clear all area Set the sensitivity and delay time of the Buzz aam Trigger Email alarm motion detect Trigger record channel i Zi rararars rer re Pic Adjust Adjust the Brightness CE A O E E E E ti Contrast Hue and Saturation of the Set Cancel pictu re The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 30 4 5 VOIP Control Presses Start VOIP enable the intercom function 4 6 Configuration 4 6 1 Server Para In this setting interface respectively setting Settings the related parameters of the server Set DeviceName JH2S4DVR Pade ie e B S Methods and Notes please refer to the system 00 11 22 22 11 22 Port 8650 aa d ee configuration info and network of server Lock Time Never 7 DNS 203 96 134 133 z A eee Oco EE instructions Auto Switch Never PPPoE E Standard PPPoE User test VGA Resolution 1280 1024 PPPoE ae Transparency DHCP Iv Language Eng
15. mosaics during playbacking Please check whether there is a bad hard disk sectors If one of logical hard disk is The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 55 damaged please re format the partition on the hard disk If there is physical damage to the hard disk please replace the hard disk 17 The video of live viewing or playback has dithering Please check if the video format of system setting is same as camera itself The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly
16. should connect both of ends to ground for individual power supply or there may be interference with long distance transmission resulting in incorrect alarm If user connect different sensor with one alarm input port the system can not just which one is alarming 3 Alarm Output Alarm output is normally disconnecting status and will be connected when alarm is triggered It doesn t supply power the external speakers lights sirens need extra power supply to work properly Individual supply 1A 1B Appendix 3 Backup amp Playback The format of backup file is ifv user need to use the player attached in CD to play it which The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 52 shows the following interface f JVRPIaye esc oes File E Contral c Rate R Info Z Help H Control C Rate R Info I Help H Open O cCtrl O Close C Ctrl C Exit DVR PLAYER Play Stop Slow Quick Pre Mext Step Map Play Stop Slow Quick Pre Next Step Map File E Rate R Info Help H File F Controllo Mz Info I Help H Play Pause P Ctrl F Rate Increase I 1 8 Ctrl I Single Frame Step 4 SPACE Rate Decrease D 1 8 Ctrl O Prev E Ctrl F Mext N Ctrl M Normal Rate r 1 Rate 1 8 E Chrl Rate 1 4 0 Ceri 4 Rate
17. used alarm input port should be unable from software If the supplied voltage is less than 11V it will affect the normal function of sensor and alarm Once it happen user should make 12V power lines much thicker or give an individual power supply for the sensor to ensure the proper work of equipment Individual power supply 127 12V GND Input 1 Input 2 User should connect both of ends to ground for individual power supply or there may be interference with long distance transmission resulting in incorrect alarm If user connect different sensor with one alarm input port the system can not just which one is alarming 2 Normally Open If the sensor is normally open and in disconnecting status the 12V voltage will go through the resistor and then connect with alarm input port Connect the sensor with resistor once encounter event of alarm the 12V voltage will directly go through sensor and then to alarm input port the alarm will be triggered too Remark the power of sensor is supplied by the DVR The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 51 Individual Power supply 127 DVR me a li Probe momoe oe a a a EFEFEF EA 12V GND Input 1 Input 2 If there is a long distance between sensor and DVR independent power supply to sensor will be better User
18. whether the camera monitor or circuitry is aging 5 How to get the best effect of display DAdjust the camera 2 Adjust parameter of the display equipment Adjust the video setting from DVR 6 The image is distorted or not full of the whole screen while using computer monitor Distortion please refer to user manual for computer monitor adjust the window shape with Barrel pincushion trapezoid parallelogram and rotating function 2 Adjust the Horizontal and Vertical Size of window 7 The color displayed on monitor is different from the actual color DCheck cable between motherboard and GA board is connected well please also check if the VGA cable is well 2 Check whether thermal dissipation of device is well 8 There are mosaic while playback DPlease check if the video parameter for recording is too low 2 Check the hard disk to see if there is any bad sector 9 The client software can not be installed successfully The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 54 Please install the software above version DirectX8 1 to acceleration 10 The video appears mosaic or freezing while remote viewing DUnstable network conditions check if the network is busy or congestion 2 Please check whether the PC host CPU usage reach 100 while use the client 11 There is no image after connecting with net
19. window maximization Pre next In the current window mode displays the remaining windows A total of 64 Preview windows The display amount of every page depends on screen modes 5 5 PTZ Control 1 PTZ Control Control PTZ rotation direction speed aperture zoom focus light wiper and other auxiliary functions 2 Track Set and control PTZ track 3 Pre set setting Set the pre set of PTZ 4 Cruise Set the cruise point and cruise path 5 Pic adjusts Set the Brightness Contrast Hue and Saturation 5 6 Record and playback 5 6 1Clent Local Record There are 2 modes of record Manual Record and schedule record Manual Record Press record in preview control label to start recording Schedule Set the record time in configuration interface All the save path of record file and package size can be set in configuration interface Local Setting Record Setting Warning Linkage Local Record Setting Circulation Reco startorver CM end Driver CA Max File Size 32M i Save 5 6 2 Remote Playback Click Playback And then choose Remote playback to enter remote playback interface Play Back Remote Play Back Local Play Back 1 Remote Recorded Files Searching The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 41 TLClient Preview Play Back Set
20. 27 Security Settings Settings E Actives controls and plug ins 64 Automatic prompting For Actives controls gt Disable Enable 164 Binary and script behaviors Administrator approved O Disable 5 Enable E Download signed Activex controls 5 Disable O Prompt 64 Download unsigned Actives controls Pl mee Ll z Reset custom settings Enable all the ActiveX controls and plug ins here Step 4 Then click OK button and then click Yes button to confirm and save the setting Warning A Are vou sure you want bo change the security settings For this zone IE client interface instruction Operation of IE client 1 Input the IP address of the DVR and downloads the plug in from the pop up window If plug in is not installed automatically please download package and install it manually 2 After installing the plug in it will pops up following icon input the user name and password then press OK to login The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 28 UserName admin lf plugin is notinstalled automatically please download the package and install it manually 4 1 GUI The main screen includes Logout Preview PTZ control button Stream Channel Bialik VOIP Configure Playback 1 264 Network Video
21. Digital Video Recorder User Manual Copyright Statement This manual is designed to provide instruction on how to use the Stand alone DVR developed by our company Information of this manual has been carefully designed and arranged and also checked for accuracy before publication however no guarantee is given as to the correctness of the contents in print and depiction Corrections will be made as necessary in subsequent editions for the benefit of our customers No guarantee or other hints in any form about the content or usage of this manual is announced Also the information contained in this document is subject to change without any previous notice by function upgrade or addition No part of this documentation may be copied reproduced or translated in any form without the written permission of the copyright holder The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly Before Starting Your DVR Operation This document is a basic manual for the DVR users This manual describes the appearance of products how to operate how to configure the system program and how to use the system Before using DVR user should read the contents of this user manual and then deal with the product considering the precautions defined in the manual To open the DVR case and touch the inner parts for corrective maintenance user should
22. Monitor System Useradrnin tra E J HE Main Stri w Channel 1 Channel 2 Channel 3 Channel 4 Channel 5 Channel E Channel 7 Channel Channel 9 Channeli Channel Channelt2 Channels Channel d Channel Channel Start VO IF Play back e Open preview channel Press channel name to open the target channel E Channeli i oni Channel is off Preview mode Press LODRA to switch the signal preview or Multi preview The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 29 4 2 Video Stream This device support dual stream User can choose the stream type to preview from the select box 4 3 PTZ it e Direction key of PTZ Press to control the direction of PTZ camera Iris User can increase and reduce the aperture of PTZ camera Focus to adjust the focus of PTZ camera Zoom to zoom in or zoom out 4 4 Advanced Setting After open the preview channel click the right button of mouse to open the Advanced Settings window in the corresponding channel Open Close Audio Press this button to open or close audio of that Oper ndi o SnapShot Channel eli Snapshot take snapshot of current view screen and save it as picture FTZ Option format OSD Option NOP ar am Record Enable the recording of that channel and save it Fic Adjust PTZ options Set the PTZ preset point
23. annel Day Mor 7 Schedule RecordTime Timing MO Alarm Al aaan C z z i Bl ___ _ 17 38 E El E E i Fa E a 17 38 E El E Fl Gl ____ 17 38 E 17 38 Y El E E Copy To Other Week Elmon E Tues lwednes Thurs Meri Satur sun Copy To Other Channel Pol Foz Foz Eos os Eog lor Elos All Yes N 13 El 14 is Fog E 10 Eii 12 16 5 7 6 Motion Detect Information v ideoDetection Info ideo Channel MIO Detection Type Trigger AlarmGut loi joe los Ci Trigger Info Email Alarm Ol Sound Alarm E Delay Bs ay Sense NoDetect 7 Trigger Record Channel Eo Foz os Fo4 Eos Elos Eloy os Allovies iz E13 E 14 is E 16 Pos E 10 Eii 5 7 7 Others The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 46 Other Configer Manual Record Eo loz Eos 04 Eos 06 lar os Eos E 10 Pii E12 13 Fl 14 E 15 16 Set Disk Info System Time Capacity MB FreermMB 0009 12 18 17 38 54 D Remotect Clear Alarm FactorySet Update 5 8 Client Setting 5 8 1 Local Setting Loop Play Enable Loop Loop Time s 20 Snap Picture Setting L Snap JPEG Picture Path Setting Remote Download File Path C PownLoad Browse Save Snap Picture Path C PictureFile Browse Advanced Setting Warning Linkage Warning Sound Out Warning Time delay
24. ckup DVD RW drive backup remote backup through network 7 Manual record timing record alarm record 8 Multi plex Support preview playback backup network transmission simultaneously 9 Support multi channel playback Max 4chs search by time event channel log and so on 10 Support VGA output monitor output Video specification Language Support Chinese English Japanese Russian Portuguese Spanish Italian France Germany 1 VGA output 1 TV output RCA or BNC connector 1Vp p 750 25f ch PAL SECAM 30f ch NTSC adjustable PAL 720x576 D1 NTSC 720x480 D1 Audio specification The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly Audio Output 1 ch audio output BNC 2Vp p 6000 Two way talk Working environment 350 L 320 W 75mm H Chapter 2 Product Structure 2 4KGS Without HDD 2 1 Front Panel 1 Indicator light 2 Turn on off 3 Digital button 4 Function key The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 5 Direction Ok PTZ button 2 2 Back Panel gem N j N z a y i 9 G OE BO COO OR ORO R Cy a j 1 Fan 2 Video Output 3 Talk back connector 4 Audio input 5 Audio Output 6 V
25. contact the place where he she purchased the products to get the help from expert In addition if there is any question for use or any damage on the product please contact with the supplier who he she purchased the products from Precautions for safety 1 Precautions for installation Do not install it on a place that is exposed directly to the sunshine or contains lots of heat such as near a heating apparatus Do not install it on a place where there is severe vibration much humidity or soot Install the product on a well ventilated place Install the product on a flat floor The operating temperature range is OC 55 The operating humidity is 20 90 2 Precautions for use 1 Confirm that the DVR power supply input switch is positioned correctly for the local voltage before connecting and powering on the unit 2 Follow local rules for grounding the DVR and associated equipment 3 Confirm proper hard drive installation The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly Table of Contends Chapter 1 About products TA SIT penser Serato A lea 4 VEZ SDS CINCO ON e E sensei caisen fa pteas weit A 4 Chapter 2 Product SW UCU ia 6 o A A IA tees 6 2 Z A A a A ee ee 6 23 REMO Controller siria iria di iia 7 Pe Ae ON nn eee Oe oe eS ee ee 8 CHAPICE S Doral a 8 Se MT IO qlo AAA A ra en COR En N
26. during the period of set time if there is no operation the system will log off the current user user need to re type the user name and password to enter into the system Auto switch User can set cycle time for single channel preview Standard This device support 2 standard PAL and NTSC the default standard is PAL Please refer to Setting Method in 2 4 VGA User can adjust the resolution of VGA Transparency User can set the levels to adjust the transparency between the preview rb Uver Look Time O G Auto owi bon screen and menu Language The menu language can be changed according to the requirement of user the default language is English or Chinese Show Status if tick V preview screen will display record mode status and motion detection icon O gt Recording Al modes Schedule recording Manual record motion detect status de Motion detection record After setting press OK to save and exit or press cancel to exit but above set will not be saved 3 8 2 2 Record Click Record on the main menu to enter record setting Channel Choose a channel to set Stream Choose the stream main or sub Stream Type Select Video the system will only record video Select Composite the system will record video and audio at the same time when system is recording The manual will be changed timely without notice If any difference with products or other data providing
27. etting Cliegt Setting l 2 3 4 1 Side bar 2 Device Tree 3 Group Control 4 Group Tree 5 3 1 Device Tree configuration The default list is blank user can add areas by click on the blank area A d d Ar Pa Set Area Name Input the area name and press OK to save the area If it is the first time to add the area the main area doesn t exist the main area name is blank After adding area completely use right mouse to click the area user can add sub area and device Or use right mouse to click the area name user can add or delete area from there The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 36 Remark if the area you want to delete includes other area device or channels after delete the area the included other area device or channels will be deleted too Once any channels is within this area is recording or preview it wills pop up warning information 5 3 2 Add Device Manually Use right mouse to click the area name choose Add Device Add Device Device Information carcel Options Instructions Device name Name of device support user defined Device address IP address or domain name of device Port Port of device Amount of channel input as matter of fact User name User name of device User Password of user name In Area Area name of the device
28. ght button of mouse d After input completely press MENU or STOP to exit 5 Button For the implementation of a specific function or set to the next menu 3 3 3 Exit Menu Press MENU or STOP to exit and switch to multi screen 3 4 Main Menu After pressing menu or right button of mouse the 2009 11 11 16 32 31 main menu will pop up which is composed with 3 parts 1 Preview channel select 2 Shortcut of PTZ playback record and Audio 3 Main menu Setup tools Log Shutdown The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 3 5 Playback Click Playback to enter the Search Record interface Ko ladate anng 3 5 1 Search Channel Maa aaa oelecting the channel which you want to search press check box to select Type Selecting the type of video search means it is ticked o means not ticked Duration Input the duration you want to search Store To Choose the device to backup video in select box After setting the above mentioned search criteria press Search the system will begin to search video files and then shows the results on the screen Remark If more than 4000 video files match with the search criteria then the system only shows the latest 4000 video files If you want to find the updated files please modify the search cr
29. he channel name will shows as Device name_Channel name in group After that channel added successful it will automatic switching to next channel Choose a device from right list Click Add in middle all channels of that device will add to the left list of the group After that device added successful It will auto switch to next device Press UP and down to adjust the channel or device position of the list Choose a channel and then press delete to delete that channel after that channel delete successful It will automatic switching to next channel Choose a device in right list Press delete warning information will pops up press OK all channels under this device will be deleted Remark one channel can not be added to the same group repeatedly but can be added to different groups 5 4 Video Preview 5 4 1 Non loop Preview The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 39 TLClient Preview Play Back Device Group E hawell H 264 DYR CH1 CH2 cH3 CH4 CHS CH6 CH CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 PtzCtrl PreSet PtzTrack PicAdjust Cruise Left stop Right Time Info StartRec StopRec StartTrack StopTrack 1 Double click to start preview Click a play window
30. ideo Input 7 Alarm input 8 RS485 alarm out 9 Network Port Mouse port USB Port 10 Power connector 11 VGA output PTZ_4655AR PTZ_3485T T A86F DEV No Set same number as the device ID press OK to save Note On the condition that there are more than 1pc device in one area each device should be given a unique device number otherwise and the remote controller may control multiple devices simultaneity CLEAR Clear all area when user set video shield or motion detection area Instruction about buttons FN Switch button can change input type including numbers capitalization small letter punctuation and Chinese words typing 1 2 3 4 5 6 7 8 9 0 Number button MULT Multi screen switch MENU Press to enter menu interface SLOW Fast Backward PAUSE Playback pauses FAST Fast Forward REC Manual record PLAY Playback recorded file STOP Stop this function or Return OK PTZ Confirm or PTZ function Direction key The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 2 4 Video Format The system supports two types of Video format PAL and NTSC which can be switched by the JS1 jumper on the main board PAL NTSC Remark User needs to open the cover of DVR to change the different format so we suggest user select the correct format while installing HDD Chapter 3 Operation
31. in 5 3 3 Search on line Device within LAN Click right mouse on any area sub area choose Find Device in the menu list to search on line device in the same LAN The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 37 Find Online Device Index Device Name Device IP Device Port Device Model Max Chn Nu Add Device Cancle Choose a device and then press Add Device button A system information box wills pop up Change the device name make sure the device name not repeated then inputs user name and password i Add Device Device Information Device Name H 204 DYR Device 166 165 185 74 Device Port S650 Channel 16 UserName User In Area 5 3 4 Group Setting Click right mouse to show a list and then choose Add Group SetGroupName Add Group GroupName ation Input group name press OK to save After group is added successful add channels to the group Choose a channel from right list Click Add in middle that channel will add to the left list of the group The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 38 TLC lent HG DVR CHII 1 264 DWR CHIZ 124 DWR_CH13 Ai DWVR_CH14 A264 DWR_CH15 ALi OVR_CHIG T
32. in play panel the sides will turn to blue Double click device or channel in the list that channel will play in the blue side window 2 Drag to start preview Drag a change or a device in the list to the preview area that channel will broadcast in this window 3 Stop Preview Right mouse click the play window a menu will pop up choose stop preview or press stop in the preview control label 4 Loop Preview Directly drag the device or channel to play area to start loop preview User can set the loop time or whether starts loop preview 5 4 2 Preview Control Stop Stop previewing of currently selected window Record Press to begin or stop recording of currently selected window Snap Save the snapshot of currently selected window 5 4 3 Audio Control Press right mouse on currently selected window Choose Open Sounds it will open the audio preview of that channel Press again to close audio preview Note This can only support one audio output if you open another audio the previous audio will be turned off The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 40 5 4 4 Other Functions Window Zoom Double click the preview window in Multi screen mode will zoom window click again to return Screen mode with mode of Multi screen and signal screen Full Screen Hidden the menu to make the preview
33. ing System Info DiskFull No Lock Time Never Resolution lan Client Setting Auto Switch Never A Standard PAL State Display Transparency Opaque Language ca a la Network Info Device Port PPPOE DDNS HTTP Port PPPOE User DDNS Service IP Addr MetiWask i DHCP DDNS User Gateway AA DDNS Password DDNS Addr Ss PPPoE Password DDNS Domain Click Setting Server Setting to enter server setting Choose a device to set The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 43 After Modify completely Click OK to save 5 7 1 System Information Severino Channedinfo Alemirdo Lemni Recordio wideo Othe Camino Info Caps Cb e Dormon Mac Ak System info ALAD Seitch Mover Standard PAL Sita Display Tranapar andy Opaque e Langga Chirapa e Network Info Eerie Pori o PPPOE DONS HTTP Port o PPP Libs DORS Serna iP ady PPPOE Parranda DORS Doman Meiri DHCP DONS Wear Laer ary f DORG Parreord 5 7 2 Channel Information Channel Param Channel W ChnName Image Param Show Name F Show Time F Blind Alarm F Record Param Bit Rate 64Kbps 7 Steam Type Video ly Bit Type cPR lr Pre Rec o 5 3 Quality FrameRate 25 fps lz SubStream Param E TS Quality FrameRate 25 fps Resolutio
34. ing by different solution please confirm with the manufacturer directly 23 ADD Preset Input a preset point in edit box 2009 11 11 10 3 1 128 and then adjust the camera target e LE BAE A 1 IL bru reg Feth Number Ml location with direction key Press Set to save o Delete Input a preset point then press eth oes N Delete to delete that point Cruise Path Number Cruise path is that camera run with a path which has several cruise points in a certain speed A cruise include Cruise point Preset Point Dwell time Cruise speed and which can support 16 Cruise points at max Track setting It is used to record a 2009 11 11 18 46 17 sl pre defined path with irregular movement of camera enter the Copy to Copy the same setting to other channels After setting completely Press OK to save and exit or press cancel to exit but doesn t save 3 8 2 9 Network Press Network to get following interface The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 24 LAN Setting MAC Display the MAC address of device IP The IP address must be unique and can t have any conflicts with other host or workstation within the same network Mask Sub netting net segments Gateway To achieve communication between the different network segments Port P
35. ion please confirm with the manufacturer directly 26 Remark user should set the security of IE options before remote view via IE This can be set by following steps Step 1 Run an Internet Explorer IE browser click tool menu and select Internet options A about blank Microsoft Internet Explorer E fa File Edit View Favorites BEHS Help ae Mail and News Back ig e Pop up Blocker Manage Add ons Synchronize Windows Update Address 8 about blank Windows Messenger Enables you to change settings Step 2 Then it will pop up Internet options window Internet Options General Security Privacy Content Connections Programs Advanced Select a Web content zone to specify its security sethngs o a Local intranet Trusted sites Restricted sites Internet pe This zone contains all feb sites you haven t placed in other zones Security level for this zone Custom Custom settings To change the settings click Custom Level To use the recommended settings click Default Level Custom Level Default Level Step 3 Select Security option and click Internet icon and click on Custom Level button and then it will pop up the following setting window The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly
36. iteria Play Play the recorded file which is within the selected start and end time Backup Backup all the recorded files which are within the selected start and end time to the appointed storage device The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 3 5 2 Search Results 12 After user press the search button the results window will pop up Playback Choose the file by the button on panel or mouse then press enter or left button of mouse Turn Page Click Pre and Next to turn page input the page number and press Goto Back up Choose the backup file with mouse or FN button on panel then select store device after press Backup the recorded file will store to it Cancel Return to previous menu 3 5 3 Playback tools Press Playback to enter the playback interface Toolbar The tool is showing on the bottom of the screen and which can hide display by click right mouse button when user choose multi screen playback together and hide toolbar the channel could be enlarge reduce by click left mouse button e Play E Stop playing Pause the current play or stop the current pause In the pause model play with single frame by every click Bl Slow forward click to decrease speed Fast forward click to increase speed Dor l Backward or for
37. lish y DDNS iv State Display DDNS Service 3322 y AlandnNum f6 DDNS Domain duanyuan 3322 org AlamOutNum 4 00 DDNS User duanyuan DeviceModel SVR7316 Version Y_1_2_9 build Oct 30 2009 In this setting interface respectively setting the related parameters of the server Set Channel Pararn Info Channel f v ChnName CHO1 Image Param F Sci Cin amo P Stow Tine image setting record and PTZ of server Methods and Notes please refer to the Record Parar i 1 instructions Steam Type Video v Bit Type VER v Bit Rate 512Kbps v Quality Normal FrameRate 2 v Pre Rec Schedule Set SubStrearn FrameRate 2 Bit Rate 256Kbps z PTZ Param Baudrate 2400 d Data Bit 3 v Stop Bit 1 ka Check No v Control No y Protocol Pelco d Decoder 1 1024 2 cu 4 6 3 Alarm The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 31 In this setting interface respectively Settings setting the related parameters of the Alarm Parar Info Fae server Set Methods and Notes please refer to Alarm in Alarm out of server nput Video Lost instructions PTZLinkage LinkageID Enable Preset PreSetPoint fi Y Enable Cruise CruiseNum f Enable Track Alarm output AlarmOut ID 1 AlamType Normal Open y E Mail 51944551 7 0qq corn 4 6 4 User Information Settings Set the user i
38. m more stable This equipment can be used in banking telecommunications Electricity sector transport residential factories warehouses water conservancy facilities and other areas or departments of the Security System 1 2 Product Specification Characteristics The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 4 chess video input 1 chess audio input D1 preview resolution SATA HDD supported USB flash drive DVD RW drive remote backup supported mouse operation and IR controller operation supported VGA output supported 8 chess video input 1 chs audio input D1 preview resolution SATA HDD supported USB flash drive DVD RW drive remote backup supported mouse operation and IR controller operation supported VGA output supported 16 chs video input 4 chs audio input D1 preview resolution SATA HDD supported USB flash drive DVD RW drive remote backup supported mouse operation and IR controller operation supported VGA output supported Main features H 264 video compression algorithm low power consumption etc 1 2 Linux RTOS good network transmission performance high stability 3 User friendly design mouse panel and IR controller operation supported 4 SATA HDD supported support large capacity HDD with 1 5T 5 Support motion detection synchronously monitor 6 USB flash drive ba
39. n y PTZ Param Baudrate 115200 Data Bit Stop Bit 1 y Check No y Control No y Protocol Pelco d DecoderAddr jig Copy To Other Channel o1 Fo 1703 104 os 06 A 07 108 09 10 11 12 13 E 14 15 is The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly ho 44 5 7 3 Alarm Information Alarmin Info Alarmin ID el Type High Treata larm PTZ LinkAge LinkAgelD Enablecruise EnablePreset Enable Track CruisePathhum lf PresetPoint E Alarm ut Info Alarm ut ID el Type Normal Ope M Trigger Alarm nt Trigger Info 01 loz Email Alarm El Sound Alarm Dos 104 Delay Bs om Trigger Record Channel 01 E02 ine lo4 105 106 ior 108 E JE All eso H09 C1 10 ii IP iz 13 L114 115 16 Copy To Other Channel Eoi joe 03 Fl 04 jos 06 107 jos o All ves ho 09 10 mii Mia 113 E1 14 15 M 16 fe x Cae 5 7 4 User Information Liserinto CO Remote Right Ptz Ctrl a Record i PlayBack SetParam E Log i Tool Preview E Alarm al VOIP Local Right Pte Ctrl Al Record Lal PlayBack SetParam A Log i Tool OK Cancel 5 7 5 Record Information The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 45 Record Schedule Info RecordCh
40. nformation of server The set ServerParam ChannelPara AlarmParam UserlnfoParam Others EEE Methods and Notes please refer to user User ID ho a management of server instructions The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 32 4 6 5 Others pe In this setting interface respectively E E pr E E Clea setting the related parameters of the Other Config Manual Recorder SystemTime server Set Methods and Notes please Mi M2 M3 M4 M5 M6 M7 M8 Wa M1100110 120 13W 14M 15M 16 2009 11 26 09 38 01 y ae a refer to manual record time and date Refresh Set E HDD management clear alarm Log Capacity MB ip 248571MB 246423MB Clearalarm LogQuery search u pg rade reset and shutdown of ReBoot Update Restore lt T Client record and snapshot five Client Record and Snapshot File Saving Directory bwnw e w saving direction Set the path for server instructions saving image and recorded file 4 7 Remote Playback RemotePlayBack z Set the channel name video Channel la StartTime 2009 11 05 00 00 00 veamos a EndTime zos1125 093757 E type recorded time and then index Startrme Tendre 1 2009 11 24 14 30 01 2009 11 25 09 18 42 9527 KB press Search The results will show in the list 4000 results at max then tu
41. ny difference with products or other data providing by different solution please confirm with the manufacturer directly 22 3 8 2 7 Motion Detection Channel Click select box to choose target 2009 11 11 18 45 42 channel f Type MTD Video loss Blind aca ca aaa a B Rec ch Appoint channel to record after detection Alarm Out Set alarm out channel Buzzer Whether to activate buzzer alarm means enable o means inefficacy Delay Set the delay time of processing after detection Area Set motion detect area which refer to setting method in 3 8 2 3 Sense Set the sensitivity of detection area None means the above parameters are invalid 3 8 2 8 PTZ Configuration Channel Click select box to choose target 2009 11 11 18 45 22 amp channel Baud rate Choose a baud rate match with the connected PTZ Date Bit Choose a date bit match with the connected PTZ Stop Bit Choose a stop bit match with the connected PTZ Checksum Choose a check value match with the connected PTZ Flow Ctrl It must keep the same with PTZ flow 2009 11 11 18 45 46 control setting Protocol It must keep the same with PTZ flow control setting Decoder Input the specified decoder address Preset Setting Preset point is pre set and remembers the camera position focal length aperture and zoom The manual will be changed timely without notice If any difference with products or other data provid
42. ort number must be greater than or equal 2000 DNS after connecting with network by PPPOE protocol the system will get a dynamic IP address DHCP Enable to automatic acquisition of IP Http Port The port for IE remote viewing the default is 80 PPPoE Configuration Enable tick it to enable the Dial Up Network function with PPPoE User name Password Input the user name and password which is provided by ISP DDNS Configuration Enable tick it to enable DDNS function Choose a domain provider input the information of user name password and domain The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly Chapter 4 Remote viewing through IE IE setting and install 25 name in the edit box 3 9 Log Type Choose the type of log which user wants to search Duration Input duration in edit box then press search button the log information will show in the list User can turn page with input page number or roll middle button of mouse 3 10 Shutdown Logout Exit the current user if user wants to continue to use the DVR user need to re login system Restart confirm this action the system will restart Shutdown confirm this action the system will shutdown The manual will be changed timely without notice If any difference with products or other data providing by different solut
43. owing tools for main menu 1 Check box See Provide 2 selections tick it to make it effective or not tick press OK Enter or f J or click left button of mouse to choose The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 10 2 Select Box According to the system options for the contents of the drop down box select the target content use 11 J orleft button of mouse to choose For Example In the interface of search menu Store to J 3 List box Display the query results of information in the list user can select one of the option operations provide in the list accordingly For Example In the list of playback searching Press OK Enter or left button of mouse to play the recorded file press right button of mouse to choose cancel the recorded file 4 Edit box Input the title For Example In system configuration user can input digital English letter or Chinese at the edit box of device name a User can switch input types by the FN 13 or click with mouse which include digital case letters punctuation marks and Chinese input method b Press lt gt or mouse to choose edit box then press Enter or mouse which will show the screen keyboard and user can choose the character by the direction key press or mouse c User can delete character with SHIFT or ri
44. rn page with the page number LUJ lt Z Jee es gt FilePlayBack FileDownLoad TimePlayBack i Quit File playback Choose the target file Press File playback or double click with the file to play Time record The recorded file will play with the start time which is set by user File download Choose the target files Press file download the progress bar will shows the download progress The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 33 Chapter 5 Client software 5 1 Hardware Requirement OS windows 2000 or above CPU Inter Pentium 4 2 4G or above RAM 512M or above Resolution of monitor 1024 768 or above Graphic card Support hardware acceleration 5 2 Operation the client software 5 2 1 Run and login Double click TLClient exe file under client software folder to start to run it If it is the first time to use this client software user must register a super user as below MM Fesister Super Veer E F First Use Software Must Register a Super User passwort o User name and password ensure user name and password have 6 characters at least Password should be typed twice to avoid any mistake then press OK it will show login succeed aa a Login Succeed 5 2 2 User Login Choose a use name input the password If user chooses
45. s Log Setting Save Warning Log Time mA Save Operator Log Time ha System Time ma Other Setting Y Automatic LogOn Save User can set Loop play snapshot save path Log and automatic logon for the client 5 8 2 Record Information The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 47 Local Record Setting Circulation Recor Start Driver CA os End Driver E j Max File Size 32M 7 Save Set Record Planning Plan Recor 2 Recording Pattern Ti All Day Records TE ii Remark Local configuration parameter becomes effective after restart client Schedule record premise that there must be video preview stream 5 8 3 Record Saving Path Set start driver and end driver of saving path MAX file size is used for confining the size of signal file 5 8 4 Schedule Record Select the Plan Record to start plan record Select the channel for plan record from the device tree at the left side and then set time section for it 5 8 5 Alarm Linkage Set the options of alarm linkage The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly Mai 0 h 264 DYR 48 Warning Type Signal Quantity W Hard Disk Full Warnin
46. to upgrade After upgrading completely system will reboot Remark The upgrade file name must set as mainboard bin main board upgrade or The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 17 oanel bin panel upgrade Don t power off it when the system is upgrading 3 8 1 6 Date amp Time Input the correct date and time and press OK to Save Shows the information of name model and firmware version Press setup in the main menu to enter the Setup interface ile a Thew in ks ey j A eee A cto 3 8 2 1 System Device ID To control the DVR device the remote control should has the same device ID as DVR device Please refer to 2 3 on how to set the device ID for remote controller The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 18 Device Name Device name is generally defined as the regional name of the a ste monitoring area which will be easy to find i Devioe 1D 255 Standard PA while remote viewing The default is nioe Nr 264 DWR VGA ba 50 NetDVR E fe Overwrite tick YES the system will auto delete the old recorded file when HDD is full Lock Time user can select never or set the time Once user set the time
47. ust set before using it the cruise path setting can refer to 3 8 2 8 if the cruise path number is less than 2 digits user should add 0 to the number to get 2 digits The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 14 3 8 Main Menu Press main menu to enter this interface which 11 18 37 21 includes Tools Setup Log and Shutdown a P H EA m m HDD management user management sortearre upgrade time setting end olcar alarm It includes HDD management User Factory Set Clear alarm Upgrade Times System information 3 8 1 1 HDD Management SATA This shows HDD information Vv means HDD detection successful X means undetected Format Choose the disk in selection box and which will show the information of the disk press Format one confirmation page appears click confirm after format completely the HDD can be used normally Remark User must stop recording before formatting HDD The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 3 8 2 2 User Management 15 Add delete or modify user Only Admin has authorization for all setting 2005 11 18 38 01 d Al y PP E O 0 l fi a a A eal i eo z H
48. ward for 10 kod Turn on off sound Press STOP or to exit play back Without pressing Stop or O the system will auto exit the playback interface after all the selected file is played 2009 11 11 14 26 26 Status of playback at the right bottom of playback interface there is a toolbar to indicate the play speed elapsed played time total time for video file The manual will be changed timely without notice If any difference with products or other data providing by different solution please confirm with the manufacturer directly 13 3 6 Manual Record Press Record in the main menu or REC to enter manual record interface Manual record instruction Its composed with following parts Channel Correspond with the channel Status 2 Not recording recording and if there is a circle around it means it is transmitting date through network Start stop all which can start or stop recording with all channel Exit Exit to the preview interface Remark f user set manual record user must stop it manually or it will keep recording 3 7 PTZ Press PTZ to enter the PTZ setting interface The main operations of PTZ Directional Control Horizontal Scan Zooming Control Adjust the Focus Adjust Iris Speed Control Switch preset points start stop automatic cruise wiper control lighting control auxiliary equipment control Remark The preset point m
49. work while using the client DCheck whether the firewall of computer is opening If yes please turn off the firewall or reduce firewall s security level 2 Please try to close open the multicast of host 3 Please check what of kind of graphic card is using for computer some graphics cards are not allowed to open the image 12 after enabling the intercom function the system will pop up a window immediately to remind that the intercom is finished Check whether the computer open a firewall especially Sky net 13 There are no recorded data for playback after setting manual recording DCheck if the setting for search is correct While searching please make sure user has selected manually recording type 2 Make sure the hard disk has been formatted into a data area before using 14 Schedule recording can not work or there is no video data during recording time DThe setting time is not correct it should be between 00 00 to 24 00 and the starting time should be earlier than ending time 2 The power supply was accidentally disconnected during recording time 3 The requested data was overwritten 4 The HDD is physical damaged or has logical errors 15 The content of recorded data is not continuous 1 Check whether there is a power failure or abnormal voltage if user set manual record or timing record 2 Check whether the recorded time is the same with user set before if you set alarm record 16 There are lots of
Download Pdf Manuals
Related Search