Flat Screen Table Stand
Contents
1. MONOP EPICE INSTALLATION INSTRUCTIONS Flat Screen Table Stand CAUTION DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR PID 5970 ISSUED NOV 2012 1 NOTE Read the entire instruction manual before you start installation and assembly WARNING e Do not begin the installation until you have read and understood the instructions and warnings contained in this installation sheet If you have any question regarding any ofthe instruction or warning please contact your local distributor e This mounting bracket was designed to be installed and utilized ONLY as specified in this manual Improper installation of this product may cause damage or serious injury e Make sure that the supporting surface will safely support the combined load of the equipment and all attached hardware and components e Tighten screws firmly but do not over tighten Over tightening can damage the items greatly reducing their holding power e This product is intended for indoor use only Using this product outdoors could lead to product failure and personal injury Component Checklist IMPORTANT Ensure that you have received all parts according to the component checklist prior to installing If any parts are missing or faulty telephone your local distributor for a replacement pole x1 adapter bracket assembly x1 A base x12. 4mm Allen key x1 H M10x20 x1 M5x20 x2 E 3mm Allen key x1 G Package M 118888 M4x14 x4 M5x14 x4 M A M B 2 1 Assemble the Table Stand Attach the pole to the base using the screw Remove the plastic cover Slide the adapter bracket assembly to a desired position Tighten the assembly firmly using 4mm Allen key Re attach the plastic cover 34 2 Install the VESA Plate V8 Xp f display Screw the VESA plate onto the display Tighten all screws but do not over tighten 3 Install the Display Lift your display carefully and hook the VESA plate onto the mounted head 4 4 Adjustment Depending on the weight of the display it may be necessary to make adjustments to the Ball Joint Mechanism 30 30 Insert two screws into mounting holes Adjust to desired location or tilt Tighten all screws using 4mm Allen key Maintenance Check that the bracket is secure and safe to use at regular intervals at least every three months Please contact your dealer if you have any questions 54 gt 6
Download Pdf Manuals
Related Search