Correcting the Print on the Marked Tubes of the Forced Stop Input
Contents
1. 10 Title the Forced Stop Input Cable 5 1 14 Yada minami Higashi ku Nagoya 461 8670 issue Q170DEMICBLUOM Tel 81 52 721 2111 Main line 24VDC Note EMI COM Forced stop The system setting cannot disable the forced stop input Note Both the positive common and the negative common are available Since the photocoupler works in both directions the circuit operates normally even though the 24VDC power supply is connected in reverse Therefore the replacement of the currently used cable is not required2. Mitsubishi Motion controller No 10 23E Sales and Service Correcting the Print on the Marked Tubes of the Forced Stop Input Cable Q170DEMICBLLIM Thank you for your continued patronage of the Mitsubishi motion controllers and FA products Regarding the forced stop input cable Q170DEMICBLUIM the print on the marked tubes of the cable differs from that described in the user s manual Therefore we will correct the print on the actual marked tubes as shown below The currently used cable can be used without any changes Check the following contents and note the correction when using the forced stop input cable Q170DEMICBLLUIM We ask for your understanding in this matter 1 Reasons for Change The print on the marked tubes of the forced stop input cable differs from that described in the user s manual 2 Target Model and Schedule Lise aie r Forced stop input cable a the October 2010 production 3 Details of Change The print on the actual marked tubes will be corrected as shown below lt Before correction gt White cable EMI Black cable EMI COM CPU module side Marked tubes Crimping terminals lt After correction gt White cable EMI COM Black cable EMI CPU module side Marked tubes 4 Forced Stop Input Circuit The forced stop input circuit is configured as shown in the following figure Date Gaber Correcting the Print on the Marked Tubes of Mitsubishi Electric Corp Nagoya Works of 20
Download Pdf Manuals
Related Search