The Kramer T1AF-1T3 Inner Frame - Kramer Electronics Italia S.r.l.
Contents
1. The Kramer T1AF 1T3 Inner Frame Congratulations on purchasing your Kramer T1AF 1T3 inner frame for the TBUS 1Axl Table Connection bus The T1AF 1T3 inner frame includes e An opening for 1 power socket Height adjustment screws e 2 openings for 3 Kramer Tools Figure 1 T1AF 1T3 Inner Frame P N 80 005199 Power Socket and Power Cord Options Various power sockets and power cords are available to use with the T1AF 1T3 as described in the TBUS Modular Power Socket Installation and Power Cord Installation Instructions supplied with the power socket Each power socket comes with detailed assembly instructions The T 2INSERT Kit Option 80 00006699 You can install the T 2INSERT kit which includes 1 pass through insert and a blank insert instead of a power socket The T TBLANK TOOL Blank Option 80 005099 You can use the T TBLANK to cover the TOOL opening Installing the assembled Inner Frame To install the T1AF 1T3 inner frame 1 Place the assembled inner frame inside the TBUS 1Axl enclosure 2 Set the required height using your fingers to bring the inner frame to the desired position screw and tighten it in place using the height adjustment screws supplied with the inner frame Installing a Kramer TOOL To install a TOOL as shown in Figure 2 1 Screw the spacers to their designated places one on each side 2 Insert the TOOL from beneath through the TOOL opening 3 Screw the screws one on2. each side through the frame holes and spacers BSSBosess G00 SOeoeSesos Step 2 Figure 2 Installing the Kramer TOOL Connecting the Cables To connect the cables 1 2 Insert the cables to their appropriate connectors from underneath Secure the cables to the tie holes on the TBUS 1Axl Do not secure the cables too tightly or too loosely Leave a small amount of slack After the TBUS 1AxI is connected to mains power and the proper cables it is ready for use Adjusting the Height of the Inner Frame If needed you can adjust the inner frame height to accommodate large or bulky cables To adjust perform the following 1 Remove the height adjustment screws while supporting the frame from underneath with your fingers Raise or lower the connecting surface to the required height insert the screws and tighten them in place KRAMER ELECTRONICS LTD KRAMER Installation Instructions MODEL TIAF 1 TS Inner Frame For the latest information on our products and a list of Kramer distributors visit our Web site where updates to this user manual may be found We welcome your questions comments and feedback Web site www kramerelectronics com E mail info kramerel com SAFETY WARNING Disconnect the unit from the power supply before opening and servicing P N 2900 3001 68 Rev 1
Download Pdf Manuals
Related Search