Home

PROPRESS STEAMER MODEL PRO290

1. Professional Performance PROPRESS STEAMER MODEL PRO290 USER MANUAL AND OPERATING INSTRUCTIONS Read carefully before using your steamer Propress Ltd Unit 3 The Pavilions 2 East Road London SW19 1UW Tel 44 0 20 8417 0660 Email info propress co uk www propress co uk PROPRESS PRO290 STEAMER INSTRUCTION MANUAL A Working safely with this steamer is only possible when the Operating and Safety Instructions are read completely and the contents contained therein are followed Unpacking your Propress steamer In your box you will find e Propress steamer e 3 part pole assembly with top hook e Hose assembly complete e 3 Castors e Funnel e Instruction booklet Fig 1 If any of these parts are missing or damaged notify your dealer immediately To assemble your steamer as shown in fig 1 Fit press on castors to locating holes in chassis Screw poles together firmly Ensure hook on pole set is positioned over steamer this increases stability when garments are hung from the pole set The pole set height can be adjusted by adding or removing the short 17cm pole Attach hose to hose coupling and remove protective cover from nozzle Hang nozzle as shown Always return hose to this position when not in use Clear Light indicates steamer is empty see instructions Filler Cap Filling inlet Sight Glass Water level float Hose Coupling Steam outlet MAX indicates steamer
2. 8899 47 33 29 99 90 966 1 4654417 34 91 565 2645 27 0 11 902 7580 971 4 267 8001
3. is full OPERATING INSTRUCTIONS NOTE THIS APPLIANCE IS A STEAM GENERATOR USE WITH CAUTION STEAM CAN BURN AN Undo filler cap fig 3 Measure 2 Litres 3 5 pints of hot or cold tap water and pour in using funnel Do not overfill When boiler is full the indicator float will appear in the sight glass fig 4 with MAX in red if condensation restricts view remove cap to check float level If the float indicator is touching the top of the sight glass the machine has been overfilled empty excess if overfilled and mop up any spillage Replace safety filler cap Use only tap water the addition of perfume or other agent will seriously damage your steamer and void the warranty Filling with Water Turning On Connect to power supply switch on with On Off switch fig 2 Clear Steam indicator light fig 2 will illuminate It will take 5 10 minutes for steam to appear from the nozzle depending on the temperature of water used Using Your Steamer Once steaming allow hose to get hot Shake nozzle vigorously to remove excess condensation before using repeat regularly If using at low levels periodically raise the hose to full height allowing condensation to run back into the boiler Do not kink or restrict the hose as this may cause ejection of water and damage to hose Always return the hose handle to the hook on pole set with nozzle holes pointing upwards when not in use fig 1 Never leave hose assembly on floor R
4. can be effected which may invalidate your guarantee If the steamer is used in a location with hard water periodic use of a Propress descaling product is recommended Model No PROPRESS PRO290 2 Litre 50 60Hz 230 Volt 1500W THIS APPLIANCE MUST BE EARTHED This label indicates that this product should not be disposed of with household waste Waste Electrical and Electronic Equipment WEEE Directive in the European Union It should be deposited at an appropriate facility to enable recovery and recycling Operating Safety Propress steamers are designed for vertical pressing of fabric and removal of creases they should not be modified in any way to alter their operation Propress steamers are electrical steam generating appliances therefore components may get very hot and could cause burns Maintain order in the working area disorder increases the risk of an accident Keep children away from the steamer Under no circumstances should the steamer be left unattended when in operation When not in use disconnect power supply Regularly check power cable and plug when steamer is disconnected from the power supply Do not use the steamer if either are damaged contact an approved service agent for repair Incorrectly rated extension cables can be dangerous Regularly check hose for damage or distortion Never tilt or carry steamer when in use or when steamer contains hot water Do not unplug the steamer by pulling the electric cord a
5. creases and to shape collars Never steam clothes whilst they are being worn by a person Curtains amp Soft Furnishings Steam curtains from the face side if interlined it may be necessary to steam lining as well Start by steaming headings then work downwards If using optional Drapery Kit it will be necessary to change to standard Drapers hose when working at heights of less than 2 metres otherwise a large amount of condensation will build up in the hose When steaming periodically lift hose so excess condensation can run back into the boiler Ideal for use on bed valances chair covers drapes and removing pressure marks on carpets Do not use on moir silk seersucker silk taffeta artificial and natural furs or nap side of leather If in doubt test on a small inconspicuous area or steam from back of fabric No contact should be made with man made pile fabrics keep nozzle at least 10 cm away from face or reverse allowing steam to penetrate and brush the pile Cotton velvet can be steamed by lightly running the nozzle over the pile In the event of a condensation spot on fabric rub the back of the nozzle over the area it should dry without leaving a water mark Regularly rinse your steamer see instruction in Care of Your Steamer Failure to do so will cause a build up of water impurity sediment in the boiler Sediment will displace water which can cause hot water to eject from the nozzle Also the performance of the heating element
6. efilling v When steamer is empty an alarm buzzer will sound The clear Refill light will illuminate Switch steamer off Disconnect power supply and wait for steamer to cool Refill with hot cold water 2 litres 3 5 pints following above instructions take care as the machine may still be hot Do not overfill Once refilled machine will reset itself when switched on as above instructions Note The steamer is fitted with a safety filler cap If steam or water is emitted from the cap the cause is either 1 steamer is overfilled 2 steamer needs rinsing out 3 the hose is kinked or restricted Remedial action should be taken immediately to ensure no damage is caused to the steamer or hose Tips On Use Steaming clothing Garments can either be steamed on a hanger on a rail or hung from the hook on the pole assembly Ensure that the pole hook is over the steamer when hanging clothing on it this maintains the stability of the machine Run nozzle over the fabric keeping row of holes horizontal at all times Nozzle should not be tilted as this may result in water condensation being emitted after a period of use Provide tension and control to fabric with the other hand Full garments such as dresses and skirts can be steamed from the inside by touching nozzle onto material and steaming outwards this will reduce the possibility of adding creases and opens up gathers The back of the nozzle can be used as a low temperature iron to confirm
7. lways switch off at the socket then firmly grip plug and pull out of socket Always disconnect from the power supply and wait for steamer to cool down before filling with water and mop up any water spillage before connecting steamer to power supply Never detach hose or remove filler cap when machine is steaming Once a week the steamer should be cleaned See section Care Of Your Steamer Never steam yourself others or any clothing being worn Persons using the steamer must be authorised to do so and trained in safe working procedures Where necessary protective clothing should be worn To ensure appliance safety use only spare parts and accessories approved by the manufacturer Service should only be effected by the manufacturer or an approved service agent Ensure that filler cap with pressure release valve ball is always replaced on filler inlet see fig 3 and that ball is always free moving before switching steamer on never remove cap when steamer is in use Do not use steamer under a fire sprinkler system or smoke detector as the steam may trigger an alarm Care Of Your Steamer To ensure a long trouble free life for your steamer it is essential that the steamer is flushed out at least once a week To do this carefully follow the instructions below The water in the steamer must be allowed to cool to a temperature which will not cause injury before emptying and the steamer must be disconnected from the power supply Remo
8. rs Australia Propress Australia Pty Ltd P O Box 528 Haberfield NSW 2045 Belgium Intersteam Europe Strobloempad 10 3202 CG Spijkenisse Holland Denmark Nordtex ApS Tietgens Alle 28 DK Odense M Denmark Finland RP Fashion Production Oy Isokaari 40 00200 Helsinki Finland France Salamandres 1 Pave de la Cornue 60620 Rosoy en Multien France Germany Krapf Bugeltecknik GmbH Bergstrasse 19 D85737 Ismaning Germany Hungary Ambiente Bris Kft 9024 Gy r K lv ria u 55 Hungary Iceland G K Heildverslun Smidjuvegur 4 200 K pavogur Iceland Kuwait A A Al Rashed Sons Co WLL P O Box 242 Safat 13003 Kuwait Netherlands Intersteam Europe Strobloempad 10 3202 CG Spijkenisse Holland New Zealand Bruce Moore Enterprises Ltd 257 Lincoln Road Addington 8024 Christchurch New Zealand Norway Bjern Haug AS Oseredmyra 2 3138 Skallestad Norway Saudi Arabia Al Ghaith EXB PO Box 8767 Riyadh 11492 Kingdom of Saudi Arabia Spain Hipershop Pto Sta Maria de la Cabenza 112 28019 Madrid Spain South Africa Tresso Trading 782 Pty Ltd T a Samfya 21 Chrislou Crescent Alberton North R S A UAE amp Qatar Al Rowad Trading Co LLC PO Box 19192 Al Qusais 1 Industrial Area Street 204 Dubai UAE 44 0 20 8417 0660 61 0 29 962 9118 31 0 181 613335 45 0 65 91 71 71 358 0 40 590 7480 33 0 3 44 39 01 56 49 0 89 964867 36 96 410 854 354 567 3414 965 2401400 31 0 18 1613335 64 3332
9. ve the pole set and hose assembly The steamer should be emptied through the steam outlet not the filler inlet into a ground level drain Where possible avoid raising the steamer up and emptying into a sink Refill steamer with fresh water and empty again Repeat procedure until the water runs clean Periodically when following the above procedures remove the sight glass cap and carefully pour cold water through the float chamber to remove any impurities Replace sight glass cap and dry any water spillage The outside of your steamer should be cleaned using a damp cloth Do not use any detergents or polish In hard water areas regular use of a Propress descaler is recommended Never use fabric freshening sprays near your steamer If the body of your steamer comes into contact with this type of spray it can cause severe damage to your steamer and will void your warranty Guarantee This appliance is guaranteed in accordance with statutory country specific regulations proof of purchase by invoice or delivery note Damage attributable to normal wear overfilling or improper use will be excluded from the guarantee In case of complaint please send the machine dismantled empty of water and clearly marked with your details and nature of your complaint to your dealer This guarantee excludes use for hire purposes United Kingdom Propress Limited Head Office Unit 3 The Pavilions 2 East Road London SW19 1UW Overseas Distributo

PROPRESS STEAMER MODEL PRO290

Contents

Download Pdf Manuals

Related Search

Related Contents