BW FM 200 User Manual - Black Widow Vehicle Security Systems
Contents
1. opened while remote running the remote start will shut down REPLACING LOST OR STOLEN REMOTE TRANSMITTERS The system can learn a maximum of 2 LCD transmitters To add a transmitter or replace lost stolen transmitters please consult with an authorized dealer SYSTEM REFERENCE INDICATORS PARKING LIGHTS FUNCTIONS On Solid Vehicle Remote Starting Flash Ix Doors Locked Flash 2x Doors Unlocked Flash 3x Open Zone Indication after arming Flash 4x Remote Starting Failed Flash 5x Auto Cold Start Engaged In STATUS INDICATOR LED FUNCTIONS On Solid Valet Mode Slow Flash System Armed Rapid Flash Passive Arming Flash 2x Remote Start Flash 3x Stop and Go Mode Flash 4x Cold Start Mode TRANSMITTER OPERATION Button Operation I ARM DISARM PANIC Button To arm or disar system press button To activate the panic feature press START Button To start the vehicle press and hold button 2 for two seconds To shut down the vehicle press button 2 and hold for two seconds TRUNK Button To activate the trunk output press button B STATUS CHECK To check current status of the syste LELLE Arm Trunk system press buttons 2 and 3 together The current status of the Transmitter Confirmation Indications Arm The display will flash the FG icon and the animated icon to confirm arming Disarm The display will flash the mmu icon and the animated to2. This feature must be programmed during installation IGNITION LOCK The ignition locking feature allows the doors to automatically lock when the ignition key is turned on and automatically unlock when the ignition key is turned off This feature must be programmed during installation VALET MODE When the system is placed into the Valet Mode both the remote starting feature and the security system will be disabled However the keyless entry and trunk release features will still function To enter the Valet Mode Be sure the system is disarmed 2 Turn the ignition key on 3 Press and hold the valet service mode switch for 3 seconds e The LED will turn on solid indicating the system is in Valet Mode To exit Valet Mode Turn the ignition key on 2 Press and hold the valet service mode switch for 3 seconds The LED will turn off e The Siren will chirp 2 times EMERGENCY OVERRIDE If the transmitter becomes lost or fails to operate the system can be disarmed by using the emergency override feature To override the system Enter the vehicle e Because the system is armed the siren will sound 2 Turn on the ignition key 3 Press the Valet Service Mode switch e The siren will stop sounding REMOTE PANIC In the event of an emergency PANIC situation the system s siren can be triggered to attract attention To activate the Panic Feature press transmitter button for 3 seconds e The siren will s
3. confirm disarming If the alarm was triggered while away the icon will be displayed Trunk The display will flash the icon opening to confirm trunk operation Warn Away If the warning stage of the shock sensor is triggered the icon and the icon will alternately flash Note Some icons that appear on the transmitter are reserved for future use and have no functions at this time Shock Page The display will show the dy icon and flash the animated g icon to indicate shock sensor triggering when the system is armed or a passenger paging from the vehicle when the system is disarmed Start The display will show the O icon and the O icon to indicate the ignition is turned on and the engine is going to crank When the engine starts and continues to run the O icon will be displayed the exhaust icon will flash and the Jon icon will rotate Door If a door is opened while the system is armed the icon will be displayed the doorframe will animate and the icon will be displayed DLC U S A 12753 Moore Street Cerritos California 90703 6 David Levy Company Inc FM200 Rev 01 01
4. l lt Z lt op pS pa Z Standard Features The system has the following standard features e 1 3 button LCD display remote control e Status indicator LED Program Valet switch e Remote Start capabilities e Extended Range Transceiver e Multi tone siren 120dB e Dual stage shock sensor e Remote panic e Valet mode e Remote chirp mute e Remote sensor bypass e Passive or active arming Stop amp Go Feature e Auto Cold Start e Flashing parking lights e Auto Rearm e Passive Arming FM SECURITY REMOTE START SYSTEM Optional Features The system has many optional features that may require additional parts and or labor Please contact your dealer for more details e Remote keyless entry Door lock unlock Illuminated entry Hood amp trunk protection Horn honk Trunk hatch release e Window roll up e Back up battery e Additional sensors glass breakage microwave Note Some features may not be appropriate for certain vehicles Automatic transmission and electronic fuel injection are required on vehicles for use with this system Security System Operation ARMING OPERATION To arm the system press transmitter button e The siren will chirp once e The parking lights will flash once The doors will lock e The L E D will turn solid for 2 seconds then start flashing slowly After 10 seconds the system is armed if Installed PASSIVE ARMING The passive ar
5. Auto Cold Start feature To turn Auto Cold Start on While holding the brake pedal down push the program switch and transmitter button 2 for two seconds e The parking lights will flash three times e The siren will chirp three times e The engine will start and run for thirty seconds to indicate the Cold Start feature is engaged Disengaging the Auto Cold Start feature The Auto Cold Start feature can be deactivated in one of three ways e Press the brake pedal e Turn on the ignition e Remote start the vehicle using the transmitter STOP AND GO The Stop and Go feature allows the vehicle to remain running without use of the ignition key during short stops To activate the Stop and Go feature Press and hold the brake pedal 2 While pressing the brake pedal push transmitter button The LED will flash rapidly e The parking lights will flash four times Release the brake pedal 4 Remove the key from the ignition switch 5 Exit the vehicle and lock the doors manually or using transmitter button b w To resume driver control Unlock the doors manually or by press ing transmitter button 2 Turn on the ignition 3 Press the brake pedal e The vehicle resumes driver control The LED will turn off if optional keyless entry feature is installed SAFETY FEATURES The system will not start the vehicle if the brake pedal is pressed or the hood is open Also if the brake is pressed or the hood is
6. mately 2 seconds later the system will attempt to start the vehicle Once the car has started the heater or air conditioner will turn on and run for the preprogrammed time 15 or 25 minutes If the engine fails to start on the first attempt it will repeat the starting procedure 2 more times If the vehicle fails to start after a total of 3 times the siren will chirp 4 times Press Driving vehicle after Remote Starting Unlock the door by pressing button on the remote transmitter Enter vehicle turn ignition key to the on position Note Do not turn the key all the way to the start position as you may damage the starter Once the ignition key is turned to the on position press the brake pedal and shift the car into the proper gear and you may now drive the vehicle Note If brake pedal is A pressed prior to turning on ignition engine will turn off REMOTE ENGINE SHUTDOWN If the vehicle has been remotely started and you desire to turn the vehicle off simply press button 2 on the remote transmitter After the motor has turned off the doors will relock optional AUTO COLD START Cold start feature allows the remote starter to start and run the vehicle every one or two hours selectable by your installer for a period of 24 hours This allows the engine to remain at an operational temperature in extremely cold weather Auto Cold Start must be enabled during installation or it cannot be engaged Engaging the
7. ming feature allows the system to arm automatically without any user intervention This feature must be programmed during installation To arm the system passively Turn the ignition key off e The LED will start flashing rapidly to indicate that the system is preparing to arm The system can be armed at any time by pressing transmitter button I 2 Close all doors e The siren will chirp 30 seconds after the last door is closed to indicate the system is now armed e The doors will lock As an option the passive arming chirps can be eliminated during programming If Passive Locking is programmed during installation DISARMING OPERATION To disarm the system press transmitter button I e The siren will chirp twice IN CUPIO e The parking lights will flash twice The doors will unlock e The optional illumi nated entry feature will turn on the dome light for 30 seconds In the event the alarm was triggered while away the system will respond with 3 chirps and 3 parking light flashes AUTO REARM FEATURE The Auto Rearm feature allows the system to automatically re arm itself in the event the system is disarmed and a door is not opened within 30 seconds This feature must be programmed during installation NOTE This feature will not work on vehicles with the illuminated entry feature enabled CHIRP DELETE For full time silent operation the ARM DISARM chirps can be permanently disabled
8. ound e The parking lights will flash The Panic mode will run for 45 seconds or until transmitter button is pressed again The Panic Feature will not operate when the bo ignition is on Also if the vehicle is Remote Started activating the Panic Feature will shut down the Remote Start TRUNK RELEASE Press button 3 for approx imately 2 seconds to open the trunk TRUNK DISARM FEATURE The trunk disarm feature allows the alarm to disarm automatically whenever transmitter button 3 is used to activate the trunk release This eliminates having to first disarm the alarm before activating the trunk release This feature must be programmed during installation CAR LOCATOR FEATURE The Car Locator feature allows the parking lights to stay on for 30 seconds instead of flashing when the alarm is disarmed This feature must be programmed during installation and is not recommended for vehicles with additional aftermarket or auxiliary lighting Remote Start Operation Important The system should be placed into the valet mode when parked inside a garage or being left for service Only start the vehicle in a well ventilated area Do not use in a closed garage or indoors Be sure to familiarize yourself with all features prior to using this product REMOTE STARTING THE VEHICLE To remote start the vehicle Press button 2 on the transmitter e The siren chirps 3 times e The parking lights turn Va on OIO e Approxi
Download Pdf Manuals
Related Search