F2T Thermal Imager User`s Manual
Contents
1. F2T Thermal Imager User s Manual NASKOK V TECHNOLOGII m 45 Caution nder the dark and fog environment firemen prefer to use this infrared thermal imager to judge the atrocious condition with great confidence and efficiency Users need to read this instruction carefully or otherwise the improper and unsafe use of this fire protection thermal imager will result in death or serious injury Before the usage of the F2T thermal imager the user needs to be trained by authorized organizations and needs to understand the device s using method and its specifications Before the real use of emergency condition the training and simulation of fire condition is recommended Otherwise death or serious injury may occur Since F2T is a complicated and special optical electronic device due to the risk of fault operation or lost of direction in certain conditions the ONLY device of use for directing is not recommended in dark and fog environment this may be resulted in serious effect In the environment of high temperature condition users must operate the device according to the operating procedure or wrong operation may result in death or serious injury Dues to the extreme high temperature operation all the devices may be interrupted In the condition of F2T when the surface temperature is at 120 C it can continue to supply 20 minute s long real time images If the operation time under this worst condition is over 20 minutes2. the device will be destroyed The reflection usage of glass water and reflected surface objects is not recommended since it may cause to user delusion and illusion Please do not use this device in condition of explosion Before the entrance of the dangerous condition please test the device according to the requested procedure After the use of certain condition please check the device if it is damaged or decrease the safety level The exposure of extreme high temperature the device performance may be decreased and the images may be lost Please avoid the overexposure and the extreme high temperature beyond the design limit otherwise the device may have heat saturation and cause damages to the device The expiration of the device is related to the using frequency and using conditions different using frequency and different condition of environment may result in very different expiration 10 11 12 13 Under the usage of low temperature condition the operation period of the battery may decrease for a while n some serious condition when the device is out of power and the battery is going to run out please exit the serious environment or the device may stop working and cause serious result The battery of the device is designed precisely by our company the changed battery needs to be the same configuration or it may cause the device damaged Only authorized personnel have the right to open and repair t
3. device will be automatically turned off F2 Infrared thermal Imager User s Manual Load and Unload of the Battery Push Direction Close the Cover Close the Battery Buckles c F2 Infrared thermal Imager User s Manual Figure 3 Battery Load approaches The loading approaches can be described as follow 1 Open the Battery compartment cover and put the battery in the compartment then push it in the compartment until it is optimally charged shown as Figure 3 a 2 Close the Battery Compartment Cover shown as Figure 3 b 3 Close the Battery Buckle and let it fasten the Battery shown as Figure 3 c The unloading approaches are just the reverse of the above steps 1 Open the Battery Buckle and free the Battery fastener shown as Figure 3 c 2 Open the Battery Compartment Cover shown as Figure 3 b 3 Taken out the battery from the compartment then pull it along the compartment shown as Figure 3 a 4 Close the Battery Compartment Cover and the Battery Buckle F2 Infrared thermal Imager User s Manual Operation Guide Interface Description Figure 4 Interface High It is automatically shown up when the system changes to the high Temperature temperature display method High temperature displays as red color Scale Symbol 2 Temperature Shows the measured temperature of the central point Result The chosen palette of the current scale three palettes optional Displays the current measur
4. he device ZN Failure to follow this information could result in death or serious injury Content PNTRODUC THON cioe GIC MI TEC ENLLLEL IL dde ad uda tM ACCESSORIES dtu und t t ED e tdt diti dte tet TAE N ll aaa naa sane aa naa ane Ga BATTERY INTRODUCTION HH X Hur EOAD AND UNEOAD OR THE DAL TERY aO esee Int peso buda el eso bere ey OPERATION DE INTERFACE DESCRIPTION amd al o gala d ote od td ead ides OPERATION FLOW T a a a a a uda F2 Infrared thermal Imager User s Manual Introduction Thank you to choose the F2T handheld fire fighting thermal imager the one of the most advanced imager in the market F2T is designed specifically for those fire fighters protecting and searching under fog or dark environment The product has passed the China Commonality Safety Industry Standard GA T 635 2006 Fire fighting infrared thermal imager gt The F2T thermal imagers use advanced uncooled focal plane array infrared detectors and real time thermal image processing circuits designed by our company which have high image quality and high sensitivity F2T 15 a handheld imager and can use one hand to operate the device easily Note According to the China Commonality Safety Industry Standard GA T 635 2006 lt Fire fighting infrared thermal imager gt this fire fighting thermal imager s official type is HRY XJ F2T shorted as F2T fire fig
5. hting infrared thermal imager F2 Infrared thermal Imager User s Manual Technical Specifications Ow 1I MN Palette Rain White hot Black hot and Fire fighting palettes z F2 Infrared thermal Imager User s Manual Accessories 0 Figure Accessories Table 1 Information F2T Thermal Imager 15 N H Charging Battery Battery Charger F2 Infrared thermal Imager User s Manual Appearance F2 Infrared thermal Imager User s Manual Figure 2 Appearance Table 2 Appearance and function introduction Power Button Press and hold the button to turn on or turn off the device Briefly press the button to switch between the three palettes Battery Buckle Handle Battery Compartment LCD Display Screen Battery Indicator Power Indicator Indicates the current power on or power off state Battery Introduction When the battery is full the Indicator displays as a full green icon EE When the battery is half full the Indicator displays as a half green icon EN In the remaining use period the Battery Indicator displays as a red icon NEN When the remaining operating period of time is less than 20 minutes the Battery Indicator will blink to remind the operator to pay attention on the operation time When the remaining operating period of time 15 less than two minutes the screen will display a dialog of Battery Exhausted The dialog will blink for 10 times and the
6. ing point Battery Indicator Displays the current power level of the Battery Operation Flow Turn On Press and Hold the Power Button 23s Screen displays thermal images New Target Point to the New Target New Target The Result Temperature Point to the displayed on the right top New Target comer F2 Infrared thermal Imager User s Manual New Target Change Scale Briefly press the Power Button Change scale The Result Temperature New Target displayed on the right F top corner Turn Off Press and Hold the Power Button 23s The imager is turned off
Download Pdf Manuals
Related Search